Search

In this study, two methods were examined to optimize the immobilization of antibodies on paper when conducting a paper-based enzyme-linked immunosorbent assay (P-ELISA). Human IgG, as a test-capture protein, was immobilized on paper via the formation of Schiff bases. Aldehyde groups were introduced onto the surface of the paper via two methods: NaIO 4 and 3-aminopropyltriethoxysilane (APTS) with glutaraldehyde (APTS-glutaraldehyde). In the assay, horseradish peroxidase-conjugated anti-human IgG (HRP-anti-IgG) binds to the immobilized human IgG, and the colorimetric reaction of 3,3',5,5'-tetramethylbenzyzine (TMB) produces a blue color in the presence of H 2 O 2 and HRP-anti-IgG as a model analyte. The immobilization of human IgG, the enzymatic reaction conditions, and the reduction of the chemical bond between the paper surface and immobilized human IgG all were optimized in order to improve both the analytical performance and the stability. In addition, the thickness of the paper was examined to stabilize the analytical signal. Consequently, the APTS-glutaraldehyde method was superior to the NaIO 4 method in terms of sensitivity and reproducibility. Conversely, the reduction of imine to amine with NaBH 4 proved to exert only minimal influence on sensitivity and stability, although it tended to degrade reproducibility. We also found that thick paper was preferential when using P-ELISA because a rigid paper substrate prevents distortion of the paper surface that is often caused by repeated washing processes., (© 2024. The Author(s).)

In the era of liquid biopsy, microRNAs emerge as promising candidates for the early diagnosis and prognosis of cancer, offering valuable insights into the disease's development. Among all the existing analytical approaches, even if traditional approaches such as the nucleic acid amplification ones have the advantages to be highly sensitive, they cannot be used at the point-of-care, while sensors might be poorly sensitive despite their portability. In order to improve the analytical performance of existing electroanalytical systems, we demonstrate how a simple chromatographic paper-based disk might be useful to rationally improve the sensitivity, depending on the number of preconcentration cycles. A paper-based electrochemical platform for miRNA detection has been developed by modifying a paper-based electrode with a methylene blue (MB)-modified single-stranded sequence (ssDNA) complementary to the chosen miRNA, namely miR-224 that is associated with lung cancer. A detection limit of ca. 0.6 nM has been obtained in spiked human serum samples. To further enhance the sensitivity, an external chromatographic wax-patterned paper-based disk has been adopted to preconcentrate the sample, and this has been demonstrated both in standard and in serum solutions. For each solution, three miR-224 levels have been preconcentrated, obtaining a satisfactory lowering detection limit of ca. 50 pM using a simple and sustainable procedure. This approach opens wide possibilities in the field of analytical and bioanalytical chemistry, being useful not only for electrochemistry but also for other architectures of detection and transduction., (© 2024. The Author(s).)

Wax printing is the most widely used method for fabricating microfluidic paper-based analytical devices (μPADs), but it still suffers from disadvantages like discontinuation of wax printers and need for additional equipment for heating treatment. To address these issues, this work initially describes a new class of wax printing approach for high-precision, batch fabrication of μPADs using a household 3D printer. It only involves a one patterning step of printing polyethylene wax into rice paper body. Under optimized parameters, a fabrication resolution, namely the minimum hydrophilic channel width, down to ~189 ± 30 μm could be achieved. In addition, the analytical applicability of such polyethylene wax-patterned μPADs was demonstrated well with enhanced colorimetric detection of dopamine as a model analyte by combining metal-organic framework (MOF) based nanoenzymes (ZIF-67) with a smartphone (for portable quantitative readout). The developed nanosensor could linearly detect dopamine over a concentration range from 10 to 1000 μM, with a detection limit of ca. 2.75 μM (3σ). The recovery results for analyzing several real samples (i.e., pig feed, chicken feed, pork and human serum) were between 91.82 and 102.79%, further validating its good detection accuracy for potential practical applications in food safety and medical diagnosis., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

Heavy metal ions, such as thallium(I) and lead(II) are environmental toxicants known to cause a severe threat to human and ecosystem health. This work investigates aptamers and intercalating chromophore-based complexes for the detection of these toxic species. In one method, a selective label-free "turn-on" biosensor was developed using a G-quadruplex-intercalating agent, berberine. Fluorescence, melting temperature (T m ), and circular dichroism analysis confirmed the affinity and selectivity results, illustrating the potential of these aptasensor methods for improving detection limits. These fluorescence assays were found to perform with a detection limit of 3.4 μM for Tl(I) and 0.84 nM for Pb(II). Furthermore, the assays were challenged successfully with Tl(I) and Pb(II) spiked into river water samples. We next developed paper-based fluorescent assays for Tl(I) and Pb(II), where the aptamer/berberine complex was spotted onto the paper test zone. When Tl(I) or Pb(II) ions solutions were spotted onto the top of the test zone and the spot was illuminated with a portable UV light (365 nm), a strong green fluorescence could be easily visualized with the naked eye. The lowest detection limits achieved with these fluorescent paper-based assays for Tl(I) and Pb(II) were 1.1 nM and 1.6 nM, respectively. The two fluorescent approaches presented here have the potential to be the basis of rapid, fast, and cost-efficient screening assays for these toxic species., Competing Interests: Declarations. Competing interests: The authors declare no competing interests., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

The rapid discrimination of bacteria is currently an emerging trend in the fields of food safety, medical detection, and environmental observation. Traditional methods often require lengthy culturing processes, specialized analytical equipment, and bacterial recognition receptors. In response to this need, we have developed a paper-based fluorescence sensor array platform for identifying different bacteria. The sensor array is based on three unique carbon quantum dots (CQDs) as sensing units, each modified with a different antibiotic (polymyxin B, ampicillin, and gentamicin). These antibiotic-modified CQDs can aggregate on the bacterial surface, triggering aggregation-induced fluorescence quenching. The sensor array exhibits varying fluorescent responses to different bacterial species. To achieve low-cost and portable detection, CQDs were formulated into fluorescent ink and used with an inkjet printer to manufacture paper-based sensor arrays. A smartphone was used to collect the responses generated by the bacteria and platform. Diverse machine learning algorithms were utilized to discriminate bacterial types. Our findings showcase the platform's remarkable capability to differentiate among five bacterial strains, within a detection range spanning from 1.0 × 10 3  CFU/mL to 1.0 × 10 7  CFU/mL. Its practicality is further validated through the accurate identification of blind bacterial samples. With its cost-effectiveness, ease of fabrication, and high degree of integration, this platform holds significant promise for on-site detection of diverse bacteria., (© 2024. The Author(s).)

The use of natural materials as precursors for synthesizing sorptive phases can reduce the environmental impact of the sample preparation step. In this article, two natural materials, i.e., cellulose and humic acids, are combined, resulting in a porous and flat sorptive phase that combines hydrophobic and cation exchange interactions. The simple preparation, with low reagent consumption, and the high production capacity make this process affordable. The performance of the humic acid-coated paper has been studied towards three basic drugs (cocaine, codeine, and methadone), and it has allowed the determination of the targets in saliva by direct infusion tandem mass spectrometry. The simultaneous extraction of many samples and the rapid analysis (2 min) provide a high sample throughput. The resulting method has been validated following the International Conference on Harmonization (ICH) M10 validation guide. Working at the optimum conditions, the linear range was established from 5 to 500 μg·L -1 and the detection limits were established at 1.5 μg·L -1 for all the analytes. At the LOQ, the inter-day precision and intra-day precision, expressed as relative standard deviation, were better than 13.6% and 17.9%, respectively. For low/mid/high quality controls, the inter-day precision and intra-day precision were better than 11.8% and 9.1%, respectively. The accuracy, calculated as relative recovery, was in the range of 83.8-106.1%. Several samples from patients under treatment with codeine-containing prescriptions were finally analyzed., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

Electrophoretic microfluidic paper-based analytical devices (e-µPADs) are promising for low-cost and portable technologies, but quantitative detection remains challenging. In this study, we develop a paper-based isotachophoretic preconcentration and separation method for the herbicide glyphosate as a model analyte. The device, consisting of two electrode chambers filled with leading and terminating electrolytes and a nitrocellulose strip as the separation carrier, was illuminated by a flat light source and operated with a voltage supply of 400 V. Detection was accomplished using a simple camera. Colorimetric detection was optimized through competitive complexation between glyphosate, copper ions, and pyrocatechol violet as a dye. The buffer system was optimized using simulations, (i) ensuring the pH was optimal for the demetallation of the blue pyrocatechol violet-copper complex [PV] to the yellow free dye and (ii) ensuring the electrophoretic migration of glyphosate into the slower [PV] for the colorimetric reaction. A new data evaluation method is presented, analyzing the RGB channel intensities. The linear range was between 0.8 and 25 µM, with a LOD of approximately 0.8 µM. The ITP separation preconcentrated glyphosate by a factor of 820 in numerical simulations. The method may be applied to control glyphosate formulations, especially in developing countries where herbicide sales and applications are poorly regulated., Competing Interests: Declarations. Conflict of interest: The authors declare no competing interests., (© 2024. The Author(s).)

This paper describes the design and construction of dual microfluidic paper-based analytical devices (dual-μPADs) as a lab-on-paper platform involving a "do-it-yourself" fabrication protocol. The device comprises a colorimetric and electrochemical module to obtain a dual-mode signal readout sensing strategy. A 3D pen polymeric resin was used to prepare graphite carbon-based electrodes and hydrophobic barriers on paper substrates. The proposed carbon-based ink was employed to manufacture electrodes on paper based on a stencil-printing approach, which were further characterized by electrochemical and morphological analyses. The analytical performance of the dual-μPADs was simultaneously evaluated for lactate, pH, nitrite, and salivary amylase (sAA) analysis. To demonstrate the proof-of-concept, saliva samples collected from both healthy individuals and those with periodontitis were successfully tested to demonstrate the feasibility of the proposed devices. Samples collected from individuals previously diagnosed with periodontitis showed high levels of nitrite and sAA (> 94 μmol L -1 and > 610 U mL -1 ) in comparison with healthy individuals (≤ 16 μmol L -1 and 545 U mL -1 ). Moreover, periodontitis saliva resulted in acid solution and almost null lactate levels. Notably, this protocol supplies a simple way to manufacture dual-μPADs, a versatile platform for sensitive detecting of biomarkers in saliva playing a crucial role towards the point-of-care diagnosis of periodontal disease., (© 2023. Springer-Verlag GmbH Germany, part of Springer Nature.)

We report the development of a competitive ELISA-based origami microfluidic paper-based analytical device (μPAD) for the detection of mycotoxins in animal feed material. The μPAD was patterned using the wax printing technique with the design of a testing pad in the middle and two absorption pads at the side. Anti-mycotoxin antibodies were effectively immobilized on chitosan-glutaraldehyde-modified sample reservoirs in the μPAD. The determination of zearalenone, deoxynivalenol, and T-2 toxin in corn flour was successfully achieved by performing competitive ELISA on the μPAD in 20 min. Colorimetric results were easily distinguished by the naked eye with a detection limit of 1 µg/mL for all three mycotoxins. The μPAD integrated with competitive ELISA holds potential for practical applications in the livestock industry for rapid, sensitive, and cost-effective detection of different mycotoxins in animal feed materials., (© 2023. Springer-Verlag GmbH Germany, part of Springer Nature.)

The existence of pesticide residues in the hydrosphere, biosphere, and anthroposphere can cause acute or chronic diseases and deteriorate the environment. Therefore, efficient detection of pesticide residues is of great significance to prevent food poisoning, control food pollution, and protect human lives by recognizing their distribution and concentration. Herein, a novel smartphone-coupled three-layered paper-based microfluidic chip is proposed as a facile platform to detect the pesticides. The stereoscopic capillary-driven fluid transport is enabled by the three-layered microfluidic chip configuration. The detection mechanism is based on the enzyme inhibition reaction and the chromatic reaction. The detection results are obtained by a smartphone and figured out by colorimetric quantitative analysis. Taking advantages of the above merits, we demonstrate the utilization of this smartphone-coupled three-layered paper-based microfluidic chip for the effective analysis of typical pesticides (profenofo and methomyl). The linear ranges of profenofo and methomyl are 0.27-2.1 μmol L -1 and 0.14-1.85 μmol L -1 , respectively. The corresponding limits of detection in the chips are 55 nM and 34 nM, respectively. The paper-based chips are also highly cost-effective with a total cost of 0.082 ¥ per piece. It can be anticipated that this technique will open new avenues for the mass fabrication of paper-based microfluidic chips and provide state-of-the-art methods in the field of analytical chemistry., (© 2021. Springer-Verlag GmbH Germany, part of Springer Nature.)

Uric acid (UA) is an important biomarker, as a high concentration in blood can lead to gout and further renal syndrome. Although several point-of-care testing (POCT) devices have been reported to detect UA, there are some limitations such as the requirement for uricase and the complicated pretreatment of serum/plasma samples, which restricts their use at home or in undeveloped areas. In this work, we developed an approach by applying Zn 2+ to precipitate proteins and cells in whole blood to avoid interference with the chromogenic reaction. We used carboxymethylcellulose (CMC) to immobilize tetramethylbenzidine (TMB) on a nitrocellulose membrane for colorimetric detection. Using the oxidization properties of H 2 O 2 , which turns TMB into oxidized tetramethylbenzidine (TMBox) in the presence of catalyst gold nanoparticles (AuNPs), we successfully constructed an enzyme-free paper-based POCT device using the reduction reaction of UA and TMBox for simple, speedy, and cheap colorimetric detection of UA, achieving a detection time of 8 min, a linear range of 0-150 μg/mL, and an LOD of 25.79 μg/mL. The UA concentration in whole blood samples was further measured and correlated well with the clinical value (R 2  = 0.8212). Thus, the proposed assay has the potential for POCT diagnosis, monitoring, and prognosis of diseases related to UA., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

Urinary tract infections (UTIs) make up a significant proportion of the global burden of disease in vulnerable groups and tend to substantially impair the quality of life of those affected, making timely detection of UTIs a priority for public health. However, economic and societal barriers drastically reduce accessibility of traditional lab-based testing methods for critical patient groups in low-resource areas, negatively affecting their overall healthcare outcomes. As a result, cellulose-based materials such as paper and thread have garnered significant interest among researchers as substrates for so-called frugal analytical devices which leverage the material's portability and adaptability for facile and reproducible diagnoses of UTIs. Although the field may be only in its infancy, strategies aimed at commercial penetration can appreciably increase access to more healthcare options for at-risk people. In this review, we catalogue recent advances in devices that use cellulose-based materials as the primary housing or medium for UTI detection and chart out trends in the field. We also explore different modalities employed for detection, with particular emphasis on their ability to be ported onto discreet casings such as sanitary products., (© 2021. The Author(s).)

Iron is an important micronutrient involved in several mechanisms in the human body and can be an important biomarker. In this work, a simple and disposable microfluidic paper-based analytical device (µPAD) was developed for the quantification of iron in urine samples. The detection was based on the colorimetric reaction between iron(II) and bathophenanthroline and the reduction of iron(III) to iron(II) with hydroxylamine. The developed µPAD enabled iron determination in the range 0.07-1.2 mg/L, with a limit of detection of 20 µg/L and a limit of quantification of 65 µg/L, thus suitable for the expected values in human urine. Additionally, targeting urine samples, the potential interference of the samples color was overcome by incorporating a sample blank assessment for absorbance subtraction. Stability studies revealed that the device was stable for 15 days prior to usage and that the formed colored product was stable for scanning up to 3 h. The accuracy of the developed device was established by analyzing urine samples (#26) with the developed µPAD and with the atomic absorption spectrometry method; the relative deviation between the two sets of results was below 9.5%., (© 2021. Springer-Verlag GmbH Germany, part of Springer Nature.)

In this work, a low-cost and eco-friendly paper-based analytical device (PAD) method is described for the determination of phyto-cannabinoids in cannabis and oral fluids based on a simple colorimetric reaction. The PAD was able to distinguish tetrahydrocannabinol (THC)- and cannabidiol (CBD)-rich plant samples by using 4-aminophenol (4-AP) and later on to quantify total phyto-cannabinoid content (THC + CBD + CBN) in plant and oral fluids by using the Fast Corinth V reagent. The chemical and physical properties regarding paper type and reagent concentration in the PAD were optimized to achieve the best analytical performance. After that, analytical features were obtained, including a linear range of 0.01-0.1 mg mL -1 , a limit of detection (LOD) of 0.003 mg mL -1 , and a suitable precision, expressed as relative standard deviation (RSD) lower than 10%. Furthermore, no significant interferences were observed in colorimetric reactions when tea, herbs, and drug samples were analyzed. Additionally, the PAD proved color stability up to 1 month after the sampling at 25 °C. The developed PAD was suitable for determining total phyto-cannabinoid content in plants and oral fluids, obtaining good results compared to GC-MS. Overall, this method showed good reliability resulting in an operational on-site device for drug monitoring., (© 2023. The Author(s).)

This work presents a microfluidic paper-based analytical device (μPAD) for the determination of sucrose using the Benedict's test. An asymmetric dumbbell-shaped hydrophobic barrier was produced by rubber stamping the barrier pattern onto a laboratory filter paper. Hydrochloric acid and solution containing sucrose were successively deposited onto the sample reservoir of the μPAD attached to a glass slide. The device was placed in a plastic bag and dipped into boiling water for accelerating the hydrolysis of sucrose into the reducing sugars. Then the Benedict's reagent was added at the narrow straight channel connecting the two circular zones of the μPAD, which was replaced in the plastic bag and heated again for reduction of Cu(II) by the reducing sugars. Precipitate of brick-red copper(I) oxide was formed. The image of the μPAD was recorded by a smartphone. The ratio of the red to blue intensities gave linear correlation with the concentration of sucrose in the range of 0.5-10% w/v. The relative standard deviation of the measurement was less than 5% for 2 and 4% w/v sucrose (n = 10), with limit of determination, calculated using standard deviation of regression divided by slope of calibration, of 0.26% w/v sucrose. The method was successfully validated using the dinitrosalicylic acid method for sucrose measurement. Percent recoveries of sucrose were evaluated using ten sugarcane samples. The recoveries were in the range of 89 to 101%, demonstrating that there were no significant sample matrix effects on the quantification., (© 2022. Springer-Verlag GmbH Germany, part of Springer Nature.)

Herein we report a quantitative, multiplex assay for disease markers in plasma based on an integrated setup of a portable scanner and a disposable paper-based analytical device (PAD). The quantitative analysis relies on the digital colorimetric reading of the three-layer PAD with 30 assay sites for performing respective chromogenic reactions for plasma uric acid, glucose, and triglyceride, which are considered as important risk factors for cardiovascular diseases. A portable scanner with WiFi transmission capability was used to produce high-quality color images of the PADs and wirelessly transfer them to a smartphone or other mobile devices for data processing. The concentrations of biomarkers in both standard solutions and plasma samples can be directly obtained using a custom-designed smartphone app that is also capable of constructing calibration curves. The detection limits of uric acid, glucose, and triglyceride were determined to be 0.50 mg/dL, 0.84 mmol/L, and 14 mg/dL, respectively, which are below the normal limits and adequate for clinical validation. Owing to the distinct advantages-simple, portable, and cost-effective-this mobile assay protocol can be used for point-of-care (POC) settings or resource-limited situations, and potentially for the diagnosis and prevention of infectious diseases.

Enzyme-linked immunosorbent assay (ELISA) is widely used for the detection of disease biomarkers. However, it utilizes time-consuming procedures and expensive instruments, making it infeasible for point-of-care (POC) analysis especially in resource-limited settings. In this work, a multicolorimetric ELISA biosensor integrated on a paper/polymer hybrid microfluidic device was developed for rapid visual detection of disease biomarkers at point of care, without using costly equipment. This multicolormetric ELISA platform was built on multiple distinct color variants resulted from the catalytic oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) and the etching of gold nanorods (AuNRs). The vivid color changes could be easily distinguished by the naked eye, and their red mean values allowed quantitative biomarker detection, without using any sophisticated instruments. When this multicolorimetric ELISA was integrated on a paper/polymer hybrid analytical device, it not only provided integrated processing and high portability but also enabled fast assays in about 50 min due to the unique advantages of paper/polymer hybrid devices. The limit of detection of 9.1 ng/μL of the hepatitis C virus core antigen, a biomarker for hepatitis C, was achieved using this multicolorimetric ELISA platform. This multicolor ELISA analytical device provides a new versatile, user-friendly, affordable, and portable immunosensing platform with high potential for on-site detections of various viruses, proteins, and biomarkers for low-resource settings such as at home, public venues, rural areas, and developing nations.

This study investigated the colorimetric response of standard glucose, serum glucose, and nucleic acid assays on various paper surfaces with different wettability, including hydrophilic, hydrophobic, and nearly superhydrophobic surfaces. Water contact angles (WCA) formed by water droplets on each surface were measured using ImageJ software. The hydrophilic surface showed no contact angle, while the hydrophobic and nearly superhydrophobic surfaces exhibited contact angles of 115.667° and 133.933°, respectively. The colorimetric sensitivity of the standard glucose assay was analyzed on these surfaces, revealing enhanced sensitivity on the nearly superhydrophobic surface due to the high molecular crowding effect owing to its non-wetting behavior and eventually confined reaction product at the sample loading zone. The hydrophobic nature of the surface restricts the spreading and diffusion of the reaction product, leading to a controlled and localized concentration of the assay product leading to moderate colorimetric intensity. On the other hand, the hydrophilic surface showed the least enhancement in colorimetric sensitivity; this is attributed to the high wettability of the hydrophilic surface causing the reaction product to spread extensively, resulting in a larger area of dispersion and consequently a lower colorimetric intensity. The measured limit of detection (LOD) for nucleic acid on nearly superhydrophobic surfaces was found to be 16.15 ng/µL, which was almost four-fold lower than on hydrophilic surfaces (60.08 ng/µL). Additionally, the LODs of standard glucose and clinical serum samples were two-fold lower on nearly superhydrophobic surfaces compared to hydrophilic surfaces. Our findings clearly highlight the promising potential of utilizing superhydrophobic surfaces to significantly enhance colorimetric sensitivity in paper-based diagnostic applications. This innovative approach holds promise for advancing point-of-care diagnostics and improving disease detection in resource-limited settings., (© 2023. The Author(s).)

Microfluidic-based biosensors have been developed for their precise automatic reaction control. However, these biosensors require external devices that are difficult to transport and use. To overcome this disadvantage, our group made an easy-to-use, cheap, and light pumpless three-dimensional photo paper-based microfluidic analytical device (3D-μPAD; weight: 1.5 g). Unlike conventional paper-based microfluidic analytical devices, the 3D-μPAD can be used to control fluid flow in a 3D manner, thus allowing sophisticated multi-step reaction control. This device can control fluid flow speed and direction accurately using only the capillary-driven flow without an external device like a pump. The flow speed is controlled by the width of the microfluidic channel and its surface property. In addition, fluid speed control and 3D-bridge structure enable the control of fluid flow direction. Using these methods, multi-step enzyme-linked immunosorbent assay (ELISA) can be done automatically in sequence by injecting solutions (sample, washing, and enzyme's substrate) at the same time in the 3D-μPAD. All the steps can be performed in 14 min, and data can be analyzed immediately. To test this device, thioredoxin-1 (Trx-1), a biomarker of breast cancer, is used as the target. In the 3D-μPAD, it can detect 0-200 ng/mL of Trx-1, and the prepared 3D-μPAD Trx-1 sensor displays excellent selectivity. Moreover, by analyzing the concentration of Trx-1 in real patients and healthy individuals' blood serum samples using the 3D-μPAD, and comparing results to ELISA, it can be confirmed that the 3D-μPAD is a good tool for cancer diagnosis., (© 2021. Springer-Verlag GmbH Germany, part of Springer Nature.)

Dual-emissive fluorescent carbon dots (CDs) were prepared through the solvothermal method with citric acid and urea as raw materials and dimethylformamide as the solvent. Two emission peaks were observed at 465 nm and 630 nm. Hg 2+ could selectively quench the fluorescence at 630 nm, but the fluorescence intensity at 465 nm was less affected. Accordingly, a ratiometric fluorescence sensor for Hg 2+ detection was developed, with a linear detection range of 0.5-40 μM and a limit of detection (LOD) of 37 nM. The dual-emissive CDs were loaded on the surface of the filter paper to fabricate Hg 2+ detection test paper. The color of the test paper could be changed from pink purple to blue by the addition of Hg 2+ , and thus the qualitative and quantitative detection of Hg 2+ could be realized. The concentration distinguishable by the naked eye reached 50 μM, and the quantitative detection range was 5-10,000 μM. This method shows excellent selectivity for Hg 2+ and can be used to detect Hg 2+ in real water samples, providing a highly potential sensing platform for rapid on-site detection of mercury ions., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

A new rhodamine B derivative (RDB) was synthesized and utilized for the colorimetric detection of copper ions (Cu 2+ ). This chemosensor utilized a paper strip as a support and a smartphone as a detector for on-site quantitative detection of Cu 2+ in water samples. Silica nanoparticles (SiNPs) were investigated as the modifier nanoparticles to achieve uniform color on the paper strip and showed a color response 1.9-fold higher than the one without SiNPs. The RDB chemosensor-based paper strip provided high selectivity toward Cu 2+ with a detection limit of 0.7 mg/L, and the working concentrations for Cu 2+ ranged from 1 to 17 mg/L. Parallel analyses of eight drinking water samples were conducted by inductively coupled plasma optical emission spectroscopy. The results were in good agreement, indicating the practical reliability of the established method with a short assay time and high selectivity. These indicate its great potential for on-site detection of Cu 2+ ., (© 2023. Springer-Verlag GmbH Germany, part of Springer Nature.)

Microfluidic paper-based analytical devices (μPADs) have been widely used in point-of-care testing owing to their simple operation, low volume of the sample required, and the lack of the need for an external force. To obtain accurate semi-quantitative or quantitative results, μPADs need to respond to the challenges posed by differences in reaction conditions. In this paper, multi-layer μPADs are fabricated by the imprinting method for the colorimetric detection of C-reactive protein (CRP). Different lighting conditions and shooting angles of scenes are simulated in image acquisition, and the detection-related performance of μPADs is improved by using a machine learning algorithm. The You Only Look Once (YOLO) model is used to identify the areas of reaction in μPADs. This model can observe an image only once to predict the objects present in it and their locations. The YOLO model trained in this study was able to identify all the reaction areas quickly without incurring any error. These reaction areas were categorized by classification algorithms to determine the risk level of CRP concentration. Multi-layer perceptron, convolutional neural network, and residual network algorithms were used for the classification tasks, where the latter yielded the highest accuracy of 96%. It has a promising application prospect in fast recognition and analysis of μPADs., (© 2022. Springer-Verlag GmbH Germany, part of Springer Nature.)

A method named imprint paper spray ionization mass spectrometry (imprint-PSI-MS) has been developed and employed for the determination of pungency of peppers. A pepper fruit was cut into a triangular shape, deposited onto a triangular paper, and compressed by a homemade press tool aiming to imprint and transfer the pepper constituents onto the paper surface. Subsequently, the triangular paper was submitted to conventional PSI-MS analysis. Twelve peppers were analyzed, ranging from highly pungent to lowly pungent taste. Pepper pungency values from the Scoville scale (in Scoville heat units, SHU) were compared with the ion intensities of the capsaicin and dihydrocapsaicin compounds obtained from the imprint-PSI-MS analysis, and a correlation coefficient of 0.97 was achieved. In addition, the ion intensities of a sugar compound were monitored in all peppers, and the results were compared with the Scoville scale. Low sugar ion intensities were detected in pungent peppers, while high ion intensities were achieved in low-pungent peppers, suggesting that the pepper pungency may be determined by inversely relating pungency to sugar contents. This work demonstrates the utility of the imprint-PSI-MS method to perform rapid qualitative analyses of peppers and estimate the pungency by monitoring the pepper metabolites. Graphical abstract.

Pathogen detection is crucial for human, animal, and environmental health; crop protection; and biosafety. Current culture-based methods have long turnaround times and lack sensitivity. Nucleic acid amplification tests offer high specificity and sensitivity. However, their cost and complexity remain a significant hurdle to their applications in resource-limited settings. Thus, point-of-need molecular diagnostic platforms that can be used by minimally trained personnel are needed. The nuclease protection assay (NPA) is a nucleic acid hybridization-based technique that does not rely on amplification, can be paired with other methods to improve specificity, and has the potential to be developed into a point-of-need device. In traditional NPAs, hybridization of an anti-sense probe to the target sequence is followed by single-strand nuclease digestion. The double-stranded target-probe hybrids are protected from nuclease digestion, precipitated, and visualized using autoradiography or other methods. We have developed a paper-based nuclease protection assay (PB-NPA) that can be implemented in field settings as the detection approach requires limited equipment and technical expertise. The PB-NPA uses a lateral flow format to capture the labeled target-probe hybrids onto a nitrocellulose membrane modified with an anti-label antibody. A colorimetric enzyme-substrate pair is used for signal visualization, producing a test line. The nuclease digestion of non-target and mismatched DNA provides high specificity while signal amplification with the reporter enzyme-substrate provides high sensitivity. We have also developed an on-chip sample pretreatment step utilizing chitosan-modified paper to eliminate possible interferents from the reaction and preconcentrate nucleic acids, thereby significantly reducing the need for auxiliary equipment. Graphical abstract.

Paper-based immunoassays are effective methods that employ microfluidic paper-based analytical devices (μPADs) for the rapid, simple, and accurate quantification of analytes in point-of-care diagnosis. In this study, we developed a wax-printed multilayered μPAD for the colorimetric detection of carcinoembryonic antigen (CEA), where the device contained a movable and rotatable detection layer to allow the μPAD to switch the state of the sample solutions, i.e., flowing or storing in the sensing zones. A smartphone with a custom-developed program served as an automated colorimetric reader to capture and analyze images from the μPAD, before calculating and displaying the test results. After optimizing the crucial conditions for the assay, the proposed method exhibited a wide linear dynamic range from 0.5 to 70 ng/mL, with a low CEA detection limit of 0.015 ng/mL. The clinical performance of this method was successfully validated using 50 positive and 40 negative human serum samples, thereby demonstrating the high sensitivity of 98.0% and specificity of 97.5% in the detection of CEA. The proposed method is greatly simplified compared with the cumbersome steps required for traditional immunoassays, but without any loss of accuracy and stability, as well as reducing the time needed to detect CEA. Complex and bulky instruments are replaced with a smartphone. The proposed detection platform could potentially be applied in point-of-care testing. Graphical abstract.

We report a smartphone-paper-based sensor impregnated with cetyltrimethylammonium bromide modified silver nanoparticles (AgNPs/CTAB) for determination of Fe 3+ in water and blood plasma samples. The methodology for determination of Fe 3+ is based on the change in signal intensity of AgNPs/CTAB fabricated on a paper substrate after the deposition of analyte, using a smartphone followed by processing with ImageJ software. The mechanism of sensing for detection and determination of Fe 3+ is based on the discoloration of AgNPs which impregnated the paper substrate. The discoloration is attributed to the electron transfer reaction taking place on the surface of NPs in the presence of CTAB. Fe 3+ was determined when the paper was impregnated with 1 mM AgNPs for 5 min of reaction time and the substrate was kept under acidic conditions. The linear range for determination of total iron in terms of Fe 3+ was 50-900 μg L -1 with a limit of determination (LOD) of 20 μg L -1 and coefficient of variation (CV) of 3.2%. The good relative recovery of 91.3-95.0% and interference studies showed the selectivity of the method for determination of total iron in water and blood plasma samples. Smartphone-paper-based sensors have advantages of simplicity, rapidity, user-friendliness, low cost, and miniaturization of the method for on-site determination of total iron compared to methods that require sophisticated analytical instruments. Graphical abstract Smartphone-paper-based sensor with cetyltrimethylammonium bromide modified silver nanoparticles for determination of Fe 3+ in water and blood plasma samples.

Ultrasensitive detection of specific biomarkers in clinical serum is helpful for early diagnosis of cervical cancer. In this paper, a surface-enhanced Raman scattering (SERS)-based immunoassay was developed for the simultaneous determination of squamous cell carcinoma antigen (SCCA) and osteopontin (OPN) in cervical cancer serum. Au-Ag nanoshuttles (Au-AgNSs) as SERS tags and hydrophobic filter paper-based Au nanoflowers (AuNFs) as capture substrate were constructed into a sandwich structure which served as an ultrasensitive SERS-based immunoassay platform. Finite difference time domain simulation confirmed that the electromagnetic field coupled between the AuNFs had a prominent SERS signal enhancement effect, which improved the detection sensitivity. SERS mapping showed that hexadecenyl succinic anhydride hydrophobic treatment could prevent the analyte from being quickly absorbed by the filter paper and increase the retention time to be more evenly distributed on the filter paper substrate. The immunoassay platform was verified to have good selectivity and reproducibility. With this method, the detection limits of SCCA and OPN in human serum were as low as 8.628 pg/mL and 4.388 pg/mL, respectively. Finally, in order to verify the feasibility of its clinical application, the serum samples of healthy subjects; cervical intraepithelial neoplasia I (CINI), CINII, and CINIII; and cervical cancer patients were analyzed, and the reliability of the results was confirmed by enzyme-linked immunosorbent assay experiments. The constructed SERS-based immunoassay platform could be used as a clinical tool for early screening of cancers in the future.

Infections caused by foodborne microorganisms are a great threat to the global environment and public healthcare today. Thus, rapid, portable and sensitive assays that can realize the identification of foodborne bacteria are highly desired. In this study, a smart fluorescent and colorimetric dual-readout sensing system has been established for simple and rapid E. coli determination by utilizing the Cu 2+ -triggered oxidation of o-phenylenediamine (OPD). Initially, Cu 2+ can oxidize OPD to OPDox, resulting in an orange-yellow fluorescence and visible pale-yellow color. However, E. coli can effectively reduce Cu 2+ into Cu + , inhibiting the Cu 2+ -triggered oxidation of OPD to OPDox. Consequently, the introduction of E. coli can turn off both the fluorescence and the UV-vis absorbance signals of the OPD-Cu 2+ system, illustrating an original mechanism for fluorescent and colorimetric dual-channel detection of E. coli. Moreover, a filter paper-based visual sensor was built and coupled with OPD-Cu 2+ solution under the assistance of a UV lamp. The as-prepared sensor can detect E. coli quantitatively with the help of a typical smartphone color-scanning application (APP). Thus, this study offers a valid dual-mode assay for sensitive and on-site visible detection of E. coli, guaranteeing the reliability of the results and is more attractive for practical use. Graphical Abstract Schematic illustration of the smartphone-integrated sensing system for fluorescent and colorimetric dual-channel detection of E. coli based on the Cu 2+ -OPD system.

Bacillus cereus is one of the most common foodborne pathogens found in various kinds of staple foods such as rice and wheat. A rapid and accurate detection method for this pathogen is highly desirable for the sustainable production of relevant food products. While several classical and molecular-based detection methods are available for the identification of B. cereus, they suffered one or more limitations such as the requirement for a tedious and time-consuming process, less than ideal specificity, and the lack of portability. Herein, we developed the first paper-based sensing device that exhibits high species specificity with sufficiently low limit of detection for the visual detection of specific DNA sequences of B. cereus. The success is attributed to the strategic planning of fabrication in various dimensions including thorough bioinformatics search for highly specific genes, the use of the pyrrolidinyl peptide nucleic acid (PNA) probe whose selectivity advantage is well documented, and an effective PNA immobilization and DNA-binding visualization method with an internal cross-checking system for validating the results. Testing in rice matrices indicates that the sensor is capable of detecting and distinguishing B. cereus from other bacterial species. Hence, this paper-based sensor has potential to be adopted as a practical means to detect B. cereus in food industries., (© 2021. Springer-Verlag GmbH Germany, part of Springer Nature.)

Simple and visual quantitative detection of foodborne pathogens can effectively reduce the outbreaks of foodborne diseases. Herein, we developed a simple and sensitive quantum dot (QD)-based paper device for visual and quantitative detection of Escherichia coli (E. coli) O157:H7 based on immunomagnetic separation and nanoparticle dissolution-triggered signal amplification. In this study, E. coli O157:H7 was magnetically separated and labeled with silver nanoparticles (AgNPs), and the AgNP labels can be converted into millions of Ag ions, which subsequently quench the fluorescence of QDs in the paper strip, which along with the readout can be visualized and quantified by the change in length of fluorescent quenched band. Owing to the high capture efficiency and effective signal amplification, as low as 500 cfu mL -1 of E. coli O157:H7 could be easily detected by naked eyes. Furthermore, this novel platform was successfully applied to detect E. coli O157:H7 in spiked milk samples with good accuracy, indicating its potential in the detection of foodborne pathogens in real samples.

The fast-growing healthcare demand for user-friendly and affordable analytical tools is driving the efforts to develop reliable platforms for the customization of therapy based on individual health conditions. In this overall scenario, we developed a paper-based electrochemical sensor for the quantification of iron ions in serum as a cost-effective sensing tool for the correct supplement administration. In detail, the working electrode of the screen-printed device has been modified with a nanocomposite constituted of carbon black and gold nanoparticles with a drop-casting procedure. Square wave voltammetry has been adopted as an electrochemical technique. This sensor was further modified with Nafion for iron quantification in serum after sample treatment with trifluoroacetic acid. Under optimized conditions, iron ions have been detected with a LOD down to 0.05 mg/L and a linearity up to 10 mg/L in standard solution. The obtained results have been compared with reference methods namely commercial colorimetric assay and atomic absorption spectroscopy, obtaining a good correlation within the experimental errors. These results demonstrated the suitability of the developed paper-based sensor for future applications in precision medicine of iron-deficiency diseases., (© 2023. Springer-Verlag GmbH Germany, part of Springer Nature.)

The copper(II) ion (Cu 2+ ) has played an indispensable role in diverse kinds of functional physiological processes of organisms, which has become of growing interest. Despite the fact that numerous Cu 2+ test papers using fluorescent probes have been fabricated, sensors featuring the ratiometric property that integrates quenched probes and an inner standard dye are rarely reported. Herein, a two-component ratiometric sensor in a paper-based device is proposed to realize highly selective Cu 2+ detection. To overcome shortcomings such as low signal-to-noise ratio and incorrect response of the quenching probe, a novel BODIPY-based turn-off probe (P2017) is designed and introduced into the paper-based device with better water solubility and selectivity for Cu 2+ detection. Furthermore, a reference dye (B001), exhibiting an emission at 690 nm when the excitation wavelength is 480 nm, is also introduced into the paper-based device. These two components can enhance the quality of the signal as P2017 is sensitively quenched by Cu 2+ , while B001 with a photostable property, serving as an internal benchmark, is unable to react with Cu 2+ . The results indicated that the two components provided a new concept for optimizing paper-based device fabrication and developing accurate, simple, and inexpensive Cu 2+ detection methods, which could be potentially applied to monitor human health and the environment in remote areas. Graphical abstract.

Paper spray high-resolution accurate mass spectrometry is a fast and versatile analysis method. This ambient ionization technique enables the quantitation of xenobiotics in complex biological matrices without chromatography or conventional sample extraction. The simplicity, rapidity, and affordability of the paper spray mass spectrometry (PS-MS) method make the technique especially attractive for clinical investigations where fast and affordable sample analysis is crucial. A new PS-MS method for the quantitation of voriconazole in equine tears was developed and validated. For a concentration range of 10 to 1000 ng/mL, good linearity (R 2  > 0.99), inter- and intra-run precision (coefficient of variation (CV) max. 11.9%), accuracy (bias of the nominal concentration ± 13.9%), and selectivity (signal areas of the double blanks represent 0.13 ± 0.05% of the lower limit of quantitation (LLOQ) signal in equine tears) were observed. The quantitation of voriconazole was based on three product ions and calculated relative to the isotope-labeled internal standard, voriconazole-d 3 , which had a final concentration of 250 ng/mL in the standards and samples. The matrix effect of the method showed an ionization suppression by reduction of the voriconazole response to 63.6%, 70.2%, and 81.9% for 30 ng/mL, 450 ng/mL, and 900 ng/mL in equine tears compared with voriconazole in solvent (methanol:water, 50:50, v:v). The method was used to analyze 126 study samples collected for a pharmacokinetic study investigating a novel approach for treatment of fungal keratitis in horses. Therefore, the integrity of the sample dilution (n = 6, CV 6.90%, and bias of nominal concentration + 8.40%) and the carryover effect (increase from 0.33 ± 0.21% to 1.33 ± 0.89% of the signal of the LLOQ) was further investigated. To our knowledge, this method is the first application of PS-MS for quantitation of drug concentrations in tears from any species.

Isoelectric focusing (IEF), a powerful technique for protein separation and enrichment, was successfully integrated into microfluidic paper-based analytical devices (μPADs) in this work. The μPADs for isoelectric focusing were fabricated by octadecyltrichlorosilane (OTS) silanization and subsequent region-selective plasma treatment. The system of IEF on μPADs could be easily assembled. And a series of conditions of the system were investigated, including the suitable concentration of ampholyte to create good pH gradient, the effect of polyvinylpyrrolidone (PVP) on electroosmotic flow (EOF) suppression, and focusing voltage applied on the paper channel. After optimization, simultaneous separation and enrichment of protein sample containing myoglobin and cytochrome C was successfully demonstrated. Besides, parallel IEF on multichannels were also achieved for the separation of multiple protein samples on one single chip, and their performance was compared with that of the conventional gel-IEF system. The developed IEF on μPADs exhibits appealing features such as low cost, simplicity, and disposability and are believed to have great application potentials.

Analytical strategies to ensure the quality and safety of food products without the need for skilled personnel are highly required. The simplicity of glucose strips for diabetes monitoring should be translated to the agri-food sector, ensuring easy evaluation of certain molecules and/or the freshness of a beverage/foodstuff. In addition to the well-known advantages that are characteristic of electroanalytical methods over other methods, paper-based materials are being used to further reduce the gap between complex laboratory testing and simple point-of-need testing. This article highlights some of the most recent advances in the development of paper-based electrochemical approaches for food surveillance, specifically focusing on the use of novel paper-based materials. Two examples are discussed: the development of a miniaturized biosensor realized on copy paper for the quantification of ethanol in commercial beers, and the measurement of ascorbic acid in food supplements within printed electronics supports. Paper-based materials have the potential to lower economic costs, simplify the operative tasks, and most importantly reduce waste generation. The continued combination of manufacturing methods and functional (smart) materials will facilitate the implementation of food analysis at the point of need.

Rapid, low-cost, and sensitive nucleic acid detection and quantification assays enabled by microfluidic paper-based analytical devices (μPADs) hold great promise for point-of-care disease diagnostics and field-based molecular tests. Through the capillary action in μPAD, flexible manipulation of nucleic acid samples can be achieved without the need for external pumps or power supplies, making it possible to fabricate highly integrated sample-to-answer devices that streamline the nucleic acid extraction, separation, concentration, amplification, and detection. To detect minute amounts of genetic materials from clinical and biological samples, it is also critical to develop sensitive signal readouts that generate physically detectable signals for in-device nucleic acid detection and/or quantification. In this review, we will focus on μPAD approaches for the facile manipulation of nucleic acids and emerging signal transduction strategies allowing sensitive and specific nucleic acid detection in μPAD. Graphical abstract ᅟ.

Genome-wide association studies have demonstrated that combinations of single nucleotide polymorphisms (SNPs), rather than individual SNPs, represent genetic signatures that correlate with heterogeneous and complex diseases. In this context, we developed a paper-based device that provides visual detection of a 10-SNP panel as a genetic signature associated with the risk for breast cancer. The method involves multiplex PCR amplification, multiplex extension reaction of allele-specific primers, without prior purification of the amplified sequences, and, finally, capture and visualization of the extension products within minutes on the device. Detection and monitoring are accomplished either by naked eye or by scanning with a common flatbed scanner. The total assay time is ∼ 2 h. The method was evaluated by using 21 clinical samples of known genotypes. The results were fully concordant with the reference method (sequencing). The proposed method is accurate, simple, rapid, and cost-effective. Visual detection does not require specialized instrumentation or highly trained technical personnel. We anticipate that the proposed device will become a useful analytical tool for precision medicine of breast cancer.

The Jatropha curcas plant (Jatropha) has been proposed as a source of biodiesel fuel, as it yields crude glycerol as an abundant by-product. Its by-products could serve as a starting material in making glycerol for FDA-regulated products. Jatropha is not regarded as a source of edible vegetable oil since it contains phorbol esters (PEs). PEs, even at very low exposure concentrations, demonstrate various toxicities in humans and animals, but may not be detected by routine impurity analyses. Here, we demonstrate the development of a rapid and simplified method for the detection and quantification of Jatropha-derived PE toxins using ambient ionization mass spectrometry. To do this, we successfully coupled a paper spray ambient ionization source with an ion trap portable mass spectrometer. The paper spray source was assembled using chromatography papers, and analyte ions were generated by applying a high voltage to a wetted paper triangle loaded with PE standards. For method development, we used commercially available PE standards on an ion trap portable mass spectrometer. Standard solutions were prepared using ethanol with PE concentrations ranging from 1.0 to 0.0001 mg mL -1 . Spike and recovery experiments were performed using USP grade and commercially available glycerol. To discern chemical differences between samples, we applied multivariate data analysis. Based on the results obtained, paper spray coupled with a portable mass spectrometric method can be successfully adopted for the analysis of toxic contaminants present in glycerol-based consumer products with LOD and LOQ of 0.175 μg mL -1 and 0.3 μg mL -1 respectively. This direct, simple design, and low-cost sampling and ionization method enables fast screening with high sensitivity in non-laboratory settings.

We develop a capillary-paper spray (CPS) ion source which allows for sample separation in the capillary and enables rapid and sensitive paper spray (PS) mass spectrometry (MS) analysis of biofluids. The CPS employs a glass capillary to load liquid analytes, vertically standing at the rear of the PS. To further reduce the matrix effect, a nitrocellulose filter membrane is placed between the glass tube and chromatography paper to absorb proteins and other macromolecules, which is beneficial for the detection of the small molecules. Compared with the normal PS method, the CPS method markedly improves spray stability and prolongs analysis duration, and also generates significantly better signal intensities during the analysis of drugs, thus indicating its potential for clinical use. As a proof of concept, quantitative analysis of drugs (metformin hydrochloride and berberine hydrochloride) in serum is performed.

Rapid and reliable identification of bacteria is an important issue in food, medical, forensic, and environmental sciences; however, conventional procedures are time-consuming and often require extensive financial and human resources. Herein, we present a label-free method for bacterial discrimination using surface-enhanced Raman spectroscopy (SERS) and partial least squares discriminant analysis (PLS-DA). Filter paper decorated with gold nanoparticles was fabricated by the dip-coating method and it was utilized as a flexible and highly efficient SERS substrate. Suspensions of bacterial samples from three genera and six species were directly deposited on the filter paper-based SERS substrates before measurements. PLS-DA was successfully employed as a multivariate supervised model to classify and identify bacteria with efficiency, sensitivity, and specificity rates of 100% for all test samples. Variable importance in projection was associated with the presence/absence of some purine metabolites, whereas confidence intervals for each sample in the PLS-DA model were calculated using a resampling bootstrap procedure. Additionally, a potential new species of bacteria was analyzed by the proposed method and the result was in agreement with that obtained via 16S rRNA gene sequence analysis, thereby indicating that the SERS/PLS-DA approach has the potential to be a valuable tool for the discovery of novel bacteria. Graphical abstract This paper describes the discrimination of bacteria at the genus and species levels, after minimal sample preparation, using paper-based SERS substrates and PLS-DA with uncertainty estimation.

Mitigation of the peroxide explosive threat, specifically triacetone triperoxide (TATP) and hexamethylene triperoxide diamine (HMTD), is a priority among the law enforcement community, as scientists and canine (K9) units are constantly working to improve detection. We propose the use of paper spray ionization-high-resolution mass spectrometry (PSI-HRMS) for detection of peroxide explosives in biological matrices. Occurrence of peroxide explosives and/or their metabolites in biological samples, obtained from urine or blood tests, give scientific evidence of peroxide explosives exposure. PSI-HRMS promote analysis of samples in situ by eliminating laborious sample preparation steps. However, it increases matrix background issues, which were overcome by the formation of multiple alkali metal adducts with the peroxide explosives. Multiple ion formation increases confidence when identifying these peroxide explosives in direct sample analysis. Our previous work examined aspects of TATP metabolism. Herein, we investigate the excretion of a TATP glucuronide conjugate in the urine of bomb-sniffing dogs and demonstrate its detection using PSI from the in vivo sample.

A colorimetric paper-based enzyme-coupled antimony tin oxide nanoparticle (ATONP) nanobiosensor for selective detection of Cd 2+ ions in clams and mussels is presented. Alkaline phosphatase (ALP) was immobilized on ATONPs via 16-phosphonohexadecanoic acid (16-PHA) to develop ATONP-ALP nanobiosensor. The biosensor was characterized using XPS, Raman spectroscopy, SEM, and EDX. ATONP-ALP nanobiosensor exhibited high selectivity towards detection of Cd 2+ ion with a LOD 0.006 μg L -1 and linear range of detection 0.005-1 μg L -1 . The developed biosensor was further integrated into a low-cost paper-based format. A visual color change was obtained for Cd 2+ ion in the range 0.1-10 μg L -1 . The developed biosensor was successfully demonstrated for the analysis of Cd 2+ ions in clams with recoveries 101-104%. The ATONP-ALP nanobiosensor was validated using mussel tissue (BCR-668) and the conventional ICP-OES and ICP-MS techniques.

Background noise due to nonspecific binding of biomolecules on the assay substrates is one of the most common challenges that limits the sensitivity of microarray-based immunoassays. Background signal intensity usually increases when complex biological fluids are used because they have a combination of molecules and vesicles that can adsorb onto substrate surfaces. Blocking strategies coupled with surface chemistries can reduce such nonspecific binding and improve assay sensitivity. In this paper, we conducted a systematic optimization of blocking strategies on a variety of commonly used substrates for protein measurement in complex biofluids. Four blocking strategies (BSA, non-fat milk, PEG, and a protein-free solution) coupled with four surface chemistries (3-glycidoxypropyltrimethoxysilane (GPS), poly-L-lysine (PLL), aminoalkylsilane (AAS), and nitrocellulose (NC)) were studied for their effect on background, microspot, and net signal intensities. We have also explored the effect that these blocking strategies have when proteins in complex samples (plasma, serum, cell culture media, and EV lysate) are measured. Irregular spot morphology could affect signal extraction using automated software. We found that the microspots with the best morphology were the ones printed on GPS glass surfaces for all immunoassays. On NC membrane, the protein-based blocking strategies yielded the highest net fluorescent intensity with the antigen contained in PBS, plasma, serum, and serum-free cell culture media. Differently, with EV lysate samples, Pierce™ protein-free blocker yielded the best net signal intensity on both GPS and NC surfaces. The choice of blocking strategies highly depends on the substrate. Moreover, the findings discovered in this study are not limited to microarray-based immunoassays but can provide insights for other assay formats., (© 2023. Springer-Verlag GmbH Germany, part of Springer Nature.)

We developed a paper-based colorimetric sensor for facile and cost-effective detection of Pb 2+ in drinking and environmental water samples. The Pb 2+ ion-selective optodes are fabricated by inkjet printing of ionophore, chromoionophore, and ion exchanger on cellulose paper. Pb 2+ in water samples induces deprotonation of the pH chromoionophore and changes the optode color, which is acquired and analyzed by a smartphone. The paper-based optode without any plasticizer or polymer has a dynamic range and selectivity comparable to those of traditional optodes using PVC polymer and/or plasticizer. Furthermore, the response time of the plasticizer/polymer-free paper-based optode is much shorter than those of plasticized PVC-based optodes on paper and glass (5 min vs. 15 and 50 min). Moreover, the plasticizer/polymer-free optode preserves the water-wicking capability of porous cellulose paper, allowing for the design of pump-free microfluidic devices. Chloramine, a widely used disinfectant in drinking water, was found to be a strong and generic interference species for heavy metal ion detection via ion-selective optodes. A fully inkjet-printed lateral-flow paper-based device consisting of a sodium thiosulfate-based chloramine elimination zone and a plasticizer/polymer-free sensing zone was designed for Pb 2+ detection in tap water disinfected by chloramine. The dynamic range of the Pb 2+ sensor may be shifted from the current 10 -6 to 10 -5  M to lower concentrations by using stronger ionophores, but this work lays a foundation for the design of paper-based heavy metal ion sensors without detrimental interference from disinfectants., (© 2022. Springer-Verlag GmbH Germany, part of Springer Nature.)

SARS-CoV-2 has mutated many times since the onset of the COVID-19 pandemic, and the omicron is currently the most dominant variant. Determining the specific strain of the virus is beneficial in providing proper care and containment of the disease. We have previously reported a novel method of counting the number of particle immunoagglutination on a paper microfluidic chip using a smartphone-based fluorescence microscope. A single-copy-level detection was demonstrated from clinical saline gargle samples. In this work, we further evaluated two different SARS-CoV-2 monoclonal antibodies to spike vs. nucleocapsid antigens for detecting omicron vs. delta and spike vs. nucleocapsid proteins. The SARS-CoV-2 monoclonal antibody to nucleocapsid proteins could distinguish omicron from delta variants and nucleocapsid from spike proteins. However, such distinction could not be found with the monoclonal antibody to spike proteins, despite the numerous mutations found in spike proteins among variants. This result may suggest a clue to the role of nucleocapsid proteins in recognizing different variants., (© 2022. Springer-Verlag GmbH Germany, part of Springer Nature.)

Propofol is a widely used intravenous anesthetic agent in sedation and general anesthesia. To improve the safety and maintain the depth of anesthesia, it is important to develop a rapid, sensitive, and reliable method to monitor the concentration of propofol in blood during anesthesia continuously. Here, we present a novel strategy based on paper spray ionization-mass spectrometry (PSI-MS) to detect propofol. Samples (in 10 μL) were mixed with methanol as protein precipitation solvent and 2,6-dimethylphenol as internal standard. Protein micro-precipitation was achieved with methanol by vortexing and centrifuging for 5 s each, and propofol was extracted to the supernatant. PSI-MS was performed in negative ionization mode, and MS signal lasted for 1 min. The analysis of a single sample was completed within 2 min. The area ratios of propofol to internal standard were calculated for quantification. Limit of detection of 5.5 ng mL -1 and limit of quantification of 18.2 ng mL -1 were achieved for propofol in whole blood. Calibration curve was linear in the range of 0.02-10 μg mL -1 . The developed method was used successfully in monitoring the propofol concentration in 3 patients' whole blood during anesthesia, showing its further application in controlling and feeding-back target concentration infusion. Graphical abstract.

In this work, a multilayer-modified paper-based colorimetric sensing platform with improved color uniformity and intensity was developed for the sensitive and selective determination of uric acid and glucose with smartphone as signal readout. In detail, chitosan, different kinds of chromogenic reagents, and horseradish peroxidase (HRP) combined with a specific oxidase, e.g., uricase or glucose oxidase (GOD), were immoblized onto the paper substrate to form a multilayer-modified test paper. Hydrogen peroxide produced by the oxidases (uricase or GOD) reacts with the substrates (uric acid or glucose), and could oxidize the co-immoblized chromogenic reagents to form colored products with HRP as catalyst. A simple strategy by placing the test paper on top of a light-emitting diode lamp was adopted to efficiently prevent influence from the external light. The color images were recorded by the smartphone camera, and then the gray values of the color images were calculated for quantitative analysis. The developed method provided a wide linear response from 0.01 to 1.0 mM for uric acid detection and from 0.02 to 4.0 mM for glucose detection, with a limit of detection (LOD) as low as 0.003 and 0.014 mM, respectively, which was much lower than for previously reported paper-based colorimetric assays. The proposed assays were successfully applied to uric acid and glucose detection in real serum samples. Furthermore, the enhanced analytical performance of the proposed method allowed the non-invasive detection of glucose levels in tear samples, which holds great potential for point-of-care analysis. Graphical abstract ᅟ.

On-site rapid monitoring of nitrite as an assessment indicator of the environment, food, and physiological systems has drawn extensive attention. Here, electrokinetic stacking (ES) was combined with colorimetric reaction on a paper-based device (PAD) to achieve colorless nitrite detection with smartphone. In this paper, nitrite was stacked on the paper fluidic channel as a narrow band by electrokinetic stacking. Then, Griess reagent was introduced to visualize the stacking band. Under optimal conditions, the sensitivity of nitrite was 160-fold increased within 5 min. A linear response in the range of 0.075 to 1.0 μg mL -1 (R 2  = 0.99) and a limit of detection (LOD) of 73 ng mL -1 (0.86 μM) were obtained. The LOD was 10 times lower than the reported PAD, and close to that achieved by a desktop spectrophotometer. The applicability was demonstrated by nitrite detection from saliva and water with good selectivity, adding 100 times more concentrated co-ions. High recovery (91.0~108.7%) and reasonable intra-day and inter-day reproducibility (RSD < 9%) were obtained. This work shows that the sensitivity of colorless analyte detection-based colorimetric reaction can be effectively enhanced by integration of ES on a PAD. Graphical abstract Schematic of the experimental setups (left) and the corresponding images (right) of the actual portable device.

Mycotoxins produced by different species of fungi may coexist in cereals and feedstuffs, and could be highly toxic for humans and animals. For quantification of multiple mycotoxins in cereals, we developed a paper-based mycotoxin immune-affinity array. First, paper-based microzone arrays were fabricated by photolithography. Then, monoclonal mycotoxin antibodies were added in a copolymerization reaction with a cross-linker to form an immune-affinity monolith on the paper-based microzone array. With use of a competitive immune-response format, paper-based mycotoxin immune-affinity arrays were successfully applied to detect mycotoxins in samples. The detection limits for deoxynivalenol, zearalenone, T-2 toxin, and HT-2 toxin were 62.7, 10.8, 0.36, and 0.23 μg·kg -1 , respectively, which meet relevant requirements for these compounds in food. The recovery rates were 81-86% for deoxynivalenol, 89-117% for zearalenone, 79-86% for T-2 toxin, and 78-83% for HT-2 toxin, and showed the paper-based immune-affinity arrays had good reproducibility. In summary, the paper-based mycotoxin immune-affinity array provides a sensitive, rapid, accurate, stable, and convenient platform for detection of multiple mycotoxins in agro-foods. Graphical abstract Paper-based immune-affinity monolithic array. DON deoxynivalenol, HT-2 HT-2 toxin, T-2 T-2 toxin, PEGDA polyethylene glycol diacrylate, ZEN zearalenone.

Nowadays, in the clinical, pharmaceutical, and environmental sectors, the development of facile and sensitive analytical methods and/or innovative devices for the follow-up and detection of antibiotics and pharmaceutical formulations, in general, are urgently needed and still challenging. This work declared three vital applications for broad-spectrum nitrofurantoin (macrofuran) antibiotic detection and quantification: A colorimetric method, a coated paper strip-based nano-lanthanum complex prototype and fabrication of smart electronic color sensor device-based coated paper strips. The colorimetric method showed a significant response upon increasing the concentration of the nitrofurantoin in a range between (1.0-100.0 ng/mL) via a visual color change from orange-yellow to red colors degree with detection and quantification limits of 0.175 and 0.53 ng/mL, respectively, whereas the nano-lanthanum complex coated paper strip prototype showed qualitative on-site sensing for nitrofurantoin via naked eye color changes which can be detected anywhere. Moreover, a smart prototype for detecting macrofuran in the means of paper color change in the RGB color component extraction algorithm and the grayscale projection value processing algorithm was fabricated. The change in RGB color on the coated paper strip was detected using an electronic color sensor device. The developed colorimetric method, coated paper strip, and the electronic color sensor device prototype exhibited fast, simple, costless, and selective towards macrofuran over the competing analyzed. As well as, showed good applicability in the different real samples spiked with different concentrations of macrofuran., (© 2022. The Author(s).)