Search

Programmable and non-volatile spin-based logic devices have attracted significant interest for use in logic circuits. Realization of logic operations via spin–orbit torque (SOT) driven magnetization switching could be a crucial step in the direction of building logic-in-memory architectures. In this work, we demonstrate experimentally, the realization of four logic operations in a heavy metal/ferrimagnet bilayer structure via SOT switching. We also propose a general scheme for choosing input parameters to achieve programmable logic operations. The bulk and tunable perpendicular magnetic anisotropy and relatively lower saturation magnetization in ferrimagnets are found to make them more energy efficient in performing logic operations, as compared to conventional ferromagnets. Thus, ferrimagnets are promising candidates for use in logic-in-memory architectures, leading to the realization of user-friendly spin logic devices in the future. [ABSTRACT FROM AUTHOR]

As one of the most successful platforms of quantum control, trapped ions can be modulated by sequential microwave pulses to realize high-fidelity quantum logic gates, and dephasing noise may lead to invalidation of phase locking. In this work, we utilize the Dirac–Frenkel time-dependent variational approach with Davydov ansatz to simulate spin echo dynamics in the framework of spin-boson model. As the essential modulation parameters, pulse duration and waiting time have been comprehensively investigated to optimize the phase gates by two microwave pulses. We find that, as spin orientation undergoes periodic changes, the phase difference by acting one and two pulses exhibits spontaneous locking following time evolution, which indicates the robustness of the quantum phase gates. Spectrum of the environmental noise that is appropriate for the phase locking is also determined. [ABSTRACT FROM AUTHOR]

The reversible quantum-flux-parametron (RQFP) is a reversible logic gate based on an energy-efficient superconductor logic family, namely, the adiabatic quantum-flux-parametron logic. The RQFP can perform logic operations in a thermodynamically reversible manner (i.e., without energy dissipation) in the quasi-static limit due to its logical and physical reversibility. Hence, it can be used for investigating the fundamental relations between information and thermodynamics from a circuit perspective. In the present study, we propose a reversible flip-flop (RFF) comprising an RQFP and investigate the minimum energy dissipation required for general information processing through numerical simulation using an RFF-based circuit. This circuit includes fundamental information processing (combinational logic, sequential logic, and data erasure) and can, thus, be used as a physical model for such an investigation. The numerical simulation of this circuit shows that both combinational and sequential logic operations can be conducted without energy dissipation in the quasi-static limit and that the amount of erased data determines the minimum energy dissipation. These results indicate that general information processing can be conducted in a thermodynamically reversible manner by using RQFP circuits as long as all data, including garbage outputs, are conserved. [ABSTRACT FROM AUTHOR]

A numerical model for a spin wave delay-line active ring resonator is presented. Spin wave dynamics along a one-dimensional strip of magnetic material are modeled using the nonlinear Schrödinger equation. The equation is solved numerically in Fourier space using the fourth-order Runge–Kutta method and yields qualitative agreement with experimental measurements of spin wave dynamics in two different regimes. The model provides a useful tool for performing experiments based on neuromorphic computing and logic gates in traveling spin wave devices. [ABSTRACT FROM AUTHOR]

The recent progress in quantum computing and space exploration led to a surge in interest in cryogenic electronics. Superconducting devices such as Josephson junction, Josephson field effect transistor, cryotron, and superconducting quantum interference device (SQUID) are traditionally used to build cryogenic logic gates. However, due to the superconducting nature, gate-voltage-based control of these devices is extremely difficult. Even more challenging is to cascade the logic gates because most of these devices require current bias for their operation. Therefore, these devices are not as convenient as the semiconducting transistors to design logic gates. Here, to overcome these challenges, we propose a ferroelectric SQUID (FeSQUID) based voltage-controlled logic gates. FeSQUID exhibits two different critical current levels for two different voltage-switchable polarization states of the ferroelectric. We utilize the polarization-dependent (hence, voltage-controllable) superconducting to resistive switching of FeSQUID to design Boolean logic gates such as Copy, NOT, AND, and OR gates. The operations of these gates are verified using a Verilog-A-based compact model of FeSQUID. Finally, to demonstrate the fanning out capability of FeSQUID-based logic family, we simulate a two-input XOR gate using FeSQUID-based NOT, AND, and OR gates. Together with the ongoing progress on FeSQUID-based non-volatile memory, our designed FeSQUID-based logic family will enable all FeSQUID-based cryogenic computer, ensuring minimum mismatch between logic and memory blocks in terms of speed, power consumption, and fabrication process. [ABSTRACT FROM AUTHOR]

Swirling spin configurations with a non-trivial topological state are popularly known as magnetic skyrmions. They are often observed in magnetic thin films with perpendicular magnetic anisotropy and Dzyaloshinskii–Moriya interaction (DMI). Due to their small size and non-collinear spin texture, they are being considered as a potential candidate for spintronic devices such as data storage devices, and logic-based devices. These skyrmions have distinct properties and interactions, that can be utilized to control their movement by applying an external electric current. In this work, we have successfully demonstrated the operation of skyrmion-based universal NAND and NOR logic gates. We have further performed arithmetic addition of two and three single-bit by using a half and full adder, fabricated based on the XOR and AND gates. We have observed that the presence of only uniform DMI is not enough to achieve all logic operations. The presence of a negative DMI at the edges is crucial in achieving proper logic operations. The findings are very important for the realization of skyrmion-based logic and computational operations. [ABSTRACT FROM AUTHOR]

The ability to modulate the polarity of carrier transport and photo‐response in assembled heterostructure devices remains a huge challenge for the development of multifunctional optoelectronics. Herein, a polarity‐switchable and polarization‐sensitive photodetector is developed based on a van der Waals (vdW) MoTe2/GeSe/MoS2 sandwich heterostructure. By varying the gate voltage, an anti‐bipolar transfer characteristic is obtained with significant peak‐valley current ratio (PVCR) exceeding 104, showing the extraordinary potential to realize electronic functions in logic circuits. Under 635 nm laser irradiation, the device exhibits a gate‐controlled polarity transition of photocurrent, namely, the sign reversal of photocurrent occurs by changing the gate voltage. Furthermore, the device achieves broadband photovoltaic effect and high photodetection performance with responsivity (R) of 723 mA·W−1, noise spectral density (Sn) of 1 fA Hz−1/2, and specific detectivity (D*) of 2.3×1012 Jones in the absence of external bias, which greatly outperforms the MoTe2/MoS2 device. Leveraging the in‐plane anisotropic structure of GeSe, the device is also endowed with an additional capability of polarization‐sensing for linearly polarized laser, possessing a high polarization ratio (PR) value of 11.2. Thus, this work proposes an effective and facile strategy to realize the gate‐modulated polarity transition and polarization‐sensitive photodetection, offering a broad perspective for multifunctional integrated applications. [ABSTRACT FROM AUTHOR]

This study introduces a simple memristor cellular neural network structure, a minimalist configuration with only two cells, designed to concurrently address two logic problems. The unique attribute of this system lies in its adaptability, where the nature of the implemented logic gate, be it AND, OR, and XOR, is determined exclusively by the initial states of the memristors. The memristors' state, alterable through current flow, allows for dynamic manipulation, enabling the setting of initial conditions and consequently, a change in the circuit's functionality. To optimize the parameters of this dynamic system, contemporary machine learning techniques are employed, specifically gradient descent optimization. Through a case study, the potential of leveraging intricate circuit dynamics is exemplified to expand the spectrum of problems solvable with a defined number of neurons. This work not only underscores the significance of adaptability in logical circuits but also demonstrates the efficacy of memristive elements in enhancing problem‐solving capabilities. [ABSTRACT FROM AUTHOR]

[Display omitted] In this work, we report the design and fabrication of self-powered binary response PDs based on II-type heterostructures consisting of SnS x nanoflakes (NFs) and rutile TiO 2 nanorod arrays (NRs). The TiO 2 NRs effectively block light with wavelengths below 400 nm from reaching SnS x. Under 385 nm light, the photoelectrons in TiO 2 recombine with holes in SnS x at the interface due to the energy band bending, resulting in a positive photocurrent. Under 410 nm light, the photoelectrons in SnS x and the photogenerated holes in TiO 2 accumulate at the interface, overcoming the interfacial potential barriers induced by the higher Fermi levels of SnS x and inducing a negative photocurrent. Based on the bipolar response, the dual-band imaging capability without external filters and the light-encrypted OR, AND, and NOT logic gates using a single device are demonstrated. This work provides a blueprint for the development of multifunctional self-powered PDs that can simplify system architecture, reduce the energy consumption, and improve accuracy for applications, such as visual systems, light-controlled logic circuits, and encrypted optical communications. [ABSTRACT FROM AUTHOR]

Quantum-dot Cellular Automata (QCA) is an emerging nanotechnology that explores the potential of using quantum effects to build compact and energy-efficient computational devices. The hardware attacks on QCA primarily target understanding the physical structure and operation of these nanotechnological circuits. The circuits like cryptographic processors hold sensitive data that needs protection from third-party attacks. Logic locking is a hardware protection technique that adds additional gates to the original circuits to prevent circuits from these attacks. In this work, a new logic locking approach is proposed for QCA based circuits. The new configurable logic gate or key gate is introduced for logic locking. This gate can be configured to either wire or inverter based on key gate inputs. Further, the metaheuristic optimization based optimal key gate placement algorithm proposed to achieve higher security with minimum key gate placement. The proposed approach is verified in QCA benchmark circuits using QCA-Designer. Results shows that the proposed achieves maximum security with minimal gate replacements. [ABSTRACT FROM AUTHOR]

This paper presents novel power-efficient designs of quaternary logic gates like Quaternary Minimum (QMIN) and Quaternary Maximum (QMAX), Standard Quaternary Inverter (SQI), Standard Quaternary NAND (SQNAND), Standard Quaternary NOR (SQNOR) and Standard Quaternary XOR (SQXOR) using Carbon Nanotube Field Effect Transistor (CNTFET). The designs are based on Pass Transistor Logic (PTL) and use only three types of Carbon Nanotube (CNT) diameters 0.626 nm, 1.018 nm, and 2.27 nm, which lead to lower fabrication costs and enhanced manufacturability when compared to the state-of-the-art designs. The designs are simulated in HSPICE with a 32 nm CNTFET model provided by Stanford University, and the average power and maximum propagation delay obtained from the simulation results are compared with other existing designs. It shows that the proposed designs require 75% to 90% less power and they achieve 73% to 91% less Power Delay Product (PDP) than the latest designs. [ABSTRACT FROM AUTHOR]

[Display omitted] Developing low-power FETs holds significant importance in advancing logic circuits, especially as the feature size of MOSFETs approaches sub-10 nanometers. However, this has been restricted by the thermionic limitation of SS , which is limited to 60 mV per decade at room temperature. Herein, we proposed a strategy that utilizes 2D semiconductors with an isolated-band feature as channels to realize sub-thermionic SS in MOSFETs. Through high-throughput calculations, we established a guiding principle that combines the atomic structure and orbital interaction to identify their sub-thermionic transport potential. This guides us to screen 192 candidates from the 2D material database comprising 1608 systems. Additionally, the physical relationship between the sub-thermionic transport performances and electronic structures is further revealed, which enables us to predict 15 systems with promising device performances for low-power applications with supply voltage below 0.5 V. This work opens a new way for the low-power electronics based on 2D materials and would inspire extensive interests in the experimental exploration of intrinsic steep-slope MOSFETs. [ABSTRACT FROM AUTHOR]

Recent studies have shown that active colloidal motors using enzymatic reactions for propulsion hold special promise for applications in fields ranging from biology to material science. It will be desirable to have active colloids with capability of computation so that they can act autonomously to sense their surroundings and alter their own dynamics. It is shown how small chemical networks that make use of enzymatic chemical reactions on the colloid surface can be used to construct motor‐based chemical logic gates. The basic features of coupled enzymatic reactions that are responsible for propulsion and underlie the construction and function of chemical gates are described using continuum theory and molecular simulation. Examples are given that show how colloids with specific chemical logic gates, can perform simple sensing tasks. Due to the diverse functions of different enzyme gates, operating alone or in circuits, the work presented here supports the suggestion that synthetic motors using such gates could be designed to operate in an autonomous way in order to complete complicated tasks. [ABSTRACT FROM AUTHOR]

Attribute-based encryption is a new cryptographic primitive that supports fine-grained access control of cloud data, and its access control function relies on the interaction of attributes and access structures. To achieve more flexible access control, attribute revocation has become an important problem that must be considered in the application process of attribute-based encryption. We propose and implement an efficient revocable ciphertext policy attribute-based encryption scheme based on the improvement of the scheme proposed by Tomida et al. Our scheme has the following characteristics: (1) It is adaptively secure under the Matrix Decisional Diffie–Hellman assumption; (2) it supports the multi-use of attribute classes and the negation of attribute values; (3) it supports the revocation of system attributes; and (4) the update of the key and ciphertext is completed by the trusted center and the cloud server, respectively, thereby decreasing revocation overhead for users. [ABSTRACT FROM AUTHOR]

Due to its powerful brain‐like parallel computing and efficient data processing capabilities, memristors are considered to be the core components for building the next generation of artificial intelligence systems. In this study, the CeOx/WOy heterojunction is employed as the functional layer, and various metal materials are utilized as the top electrode to fabricate the memristor. The results indicate that the memristive performance of the Ag/CeOx/WOy/ITO device can be improved by using Ag as the top electrode. By studying the conductivity mechanism of the device, a conductivity model is established that regulates oxygen vacancies and Ag conductive filaments. Furthermore, using the as‐prepared memristor, it is constructed four basic digital logic circuits: OR, AND, XOR, and XNOR, as well as a half adder and a full adder that can be used for digital arithmetic operations. Specifically, an odd/even checker is developed based on XOR and XNOR logic circuits to verify the correctness of data transmission. Finally, it is also designed and implemented a cryptographic array based on a memristor, which can be applied to encrypt and decrypt a series of numbers and images. Therefore, this work extends the application of memristor toward digital circuits, information transmission, data processing and image security encryption. [ABSTRACT FROM AUTHOR]

Introducing soft materials with deformability and flexibility into mechanical switches may help to develop new types of soft mechanical switches with special properties such as reconfigurable characteristics and parallel computing. However, recently developed soft mechanical switches still have low on/off ratio, slow response time, and insufficient durability. Here, a soft mechanical switch based on liquid metal and a zigzag structure is constructed through strain engineering strategy with high on/off ratio (R/R0 > 107), short response time (~0.2 s), long‐term durability (> 2000 times), and self‐healing performance which is outstanding than the reported ones. With the switch, a mechanical unit is designed and all types of logic gates can be constructed by programming switches. Such multiple switches can also be used to perform parallel computing and achieve intelligent information processing. [ABSTRACT FROM AUTHOR]

The concept of a lab-on-a-molecule, which was proposed just short of two decades ago, has captured the imagination of scientists. From originally being proposed as an AND logic gate driven by three chemical inputs as a direct way of detecting congregations of chemical species, the definition of what constitutes a lab-on-a-molecule has broadened over the years. In this review, molecules that can detect multiple analytes by fluorescence, among other techniques, are reviewed and discussed, in the context of molecular logic and multi-analyte sensing. The review highlights challenges and suggestions for moving the frontiers of research in this field to the next dimension. [ABSTRACT FROM AUTHOR]

Hydrogels are an attractive category of biointerfacing materials with adjustable mechanical properties, diverse biochemical functions, and good ionic conductivity. Despite these advantages, their application in electronics has been restricted because of their lack of semiconducting properties, and they have traditionally only served as insulators or conductors. We developed single- and multiple-network hydrogels based on a water-soluble n-type semiconducting polymer, endowing conventional hydrogels with semiconducting capabilities. These hydrogels show good electron mobilities and high on/off ratios, enabling the fabrication of complementary logic circuits and signal amplifiers with low power consumption and high gains. We demonstrate that hydrogel electronics with good bioadhesive and biocompatible interface can sense and amplify electrophysiological signals with enhanced signal-to-noise ratios. [ABSTRACT FROM AUTHOR]

Sodium (E)-3-hydroxy-4-((2-hydroxynaphthalen-1-yl)diazenyl)naphthalene-1-sulfonate (Calcon, CAL), is employed for the first time as a reversible colorimetric chemosensor to detect and measure Ce3+ and H2PO4- sequentially in the aqueous medium. The detection process has two steps. The interaction of CAL and Ce3+ in the first step with a noticeable color shift from purple to blue. Further, the reaction between CAL-Ce3+ and H2PO4- shows a clear color return from blue back to initial purple similar to that for CAL. The UV-visible examination of this color return reveals that H2PO4- removes Ce3+ and restores CAL content. The results showed that CAL and CAL-Ce3+ had a strong binding affinity and adequate detection limits for the Ce3+ and H2PO4-, respectively. For Ce3+, the linear range and detection limit are 1.20 × 10-6-1.02 × 10-4 and 2.0 × 10-7molL-1, while for H2PO4-, they are 2.0 × 10-7-8.7 × 10-6 and 3.0 × 10-8 molL-1. Finally, we measured these two ions in real samples using this methodology. Furthermore, the examination of the suggested receptor's logical behavior revealed that it can operate as a colorimetric chemosensor of the INHIBIT type, receiving chemical inputs and producing a UV-visible absorbance signal as the output. If Ce3+ and H2PO4- inputs are added in proper order, the receptor may also function as a molecular "keypad lock.". [ABSTRACT FROM AUTHOR]

[Display omitted] Based on the "ion-confined transport" strategy, supercapacitor-diodes and switchable supercapacitors as new ion-type devices have emerged with promising applications in fields such as smart grids, energy storage chips, ionic logic circuits, and neuromorphic computing. In this review, we first clarify the mechanisms of "ion-confined transport" strategies including pore confinement, interfacial confinement and field-effect confinement, and then comprehensively summarize the development of supercapacitor-diodes and switchable supercapacitors. Subsequently, building upon the physical principles of ion-confined transport in supercapacitors, the inevitable emergence of two new types of ion-type devices, supercapacitor-memristors and supercapacitor-chips, are predicted. Finally, open issues for novel supercapacitors with ion-confined transport properties are proposed, as well as their potential applications in multifunctional energy storage, next-generation information technology, and especially integrated energy electronics. [ABSTRACT FROM AUTHOR]

In this paper, we propose a single photonic crystal structure to implement NOT/XOR/OR optical logic gates using interference phenomenon. The gates are designed as T-shaped waveguides. The filter rods used in the design enhance the contrast ratio by up to 82.25 dB compared with the existing designs reported in the literature so far, and provides a maximum bit rate of 1.567Tbps with a response time of 0.63 ps. The proposed design exhibits minimum power loss, and performance parameters are enhanced compared to existing reported works. Photonic logic gates emerged as a potential substitute for their traditional electronic counterparts due to quick speed, low power consumption, and compatibility with current optical communication networks. The size of the proposed device is 144 μm2, can be used for future optical computing and communications. [ABSTRACT FROM AUTHOR]

There is a rising demand for low-cost, high-information-capacity optical signal processing. The number of devices is limited of performing different Boolean functions using a single unit. In the current manuscript, six basic logic gates, including OR, XOR, NAND, AND, NOR, and XNOR, are implemented in a single unit utilizing all-optical silicon microring resonator. At first, three microring resonators are used to get the AND, XOR and NOR logic functions. Then, beam combiners are used to get the OR, NAND and XNOR functions from AND, XOR, and NOR functions. In MATLAB, the suggested design is numerically simulated to verify the functions at an operational speed of nearly 260 Gbps. The required pump power for switching is only 1.95 mW for microring resonator based switch which is very less comparatively. Also, some performance parameters like "extinction ratio", "contrast ratio", "amplitude modulation", "on–off ratio", and "quality factor" are evaluated. To design the circuit practically, optimized parameters of the circuits have been selected. The obtained values of "extinction ratio" and "contrast ratio" are 14.97 dB and 19.03 dB, respectively. The value of AM is 0.17 dB which is less than 1 dB. The on–off ratio of the MRR is 35.10 dB which is much higher than expected. [ABSTRACT FROM AUTHOR]

mRNA medicines can be used to express therapeutic proteins, but the production of such proteins in non-target cells has a risk of adverse effects. To accurately distinguish between therapeutic target and nontarget cells, it is desirable to utilize multiple proteins expressed in each cell as indicators. To achieve such multi-input translational regulation of mRNA medicines, in this study, we engineered Rhodothermus marinus (Rma) DnaB intein to develop "caged Rma DnaB intein" that enables conditional reconstitution of full-length translational regulator protein from split fragments. By combining the caged Rma DnaB intein, the split translational regulator protein, and target protein-binding domains, we succeeded in target protein-dependent translational repression of mRNA in human cells. In addition, the caged Rma intein showed orthogonality to the previously reported Nostoc punctiforme (Npu) DnaE-based caged intein. Finally, by combining these two orthogonal caged inteins, we developed an mRNA-based logic gate that regulates translation based on the expression of multiple intracellular proteins. This study provides important information to develop safer mRNA medicines. [ABSTRACT FROM AUTHOR]

High leakage power consumption has become one of the main concerns of data security protection with CMOS device scaling. Spintronic technology is one of the efficient solutions to control circuit leakage power consumption by benefiting from its non-volatility property. Spintronic devices such as magnetic tunnel junctions (MTJs) are also compatible with CMOS transistors and suitable for designing hybrid MTJ/CMOS circuits. Hybrid MTJ/CMOS circuits can be used in many applications, such as logic-in-memory (LiM) and high-security structures. These circuits demonstrate enhanced data security compared to CMOS-based circuits by leveraging their non-volatile feature, making information leakage and data access more challenging. However, these circuits are not completely immune to attacks, and information can be revealed by potent power analysis attacks such as differential power analysis (DPA) and correlation power analysis (CPA). This paper investigates the resistance to side-channel attacks, especially DPA and CPA, for the magnetoresistive RAM (MRAM) and hybrid MTJ/CMOS AND, OR, XOR gates, hybrid MTJ/CMOS full-adder, and multiplexer circuits. Comprehensive post-layout simulation results using 40 nm TSMC CMOS technology, Monte-Carlo results, and values of normalized energy deviation (NED), normalized standard deviation (NSD)), and normalized power deviation (NPD) of PCSA-based MRAM indicate that the power consumption pattern remains constant in circuits with symmetrical structures in the reading phase even in the presence of inevitable process variation, so these circuits are resilient to power attacks and are competent for use in high-security applications such as hardware implementation of encryption algorithms. [ABSTRACT FROM AUTHOR]

The spatial self‐phase modulation (SSPM) of phosphorus‐based nanomaterials is widely studied and developed as passive nonlinear photonic devices for applications in all‐optical switches, logic gates, information converters, etc. In this work, violet phosphorus quantum dots (VP QDs) are prepared and characterized in three different solvents, their SSPM is investigated, and their spatial asymmetric light propagation performances are demonstrated. It is shown that VP QDs prepared in three different solvents exhibit different bandgaps, mainly due to the interaction between the dangling bonds of VP QDs and functional groups in different solvents. The SSPM experiment characterizes the nonlinear optical response of solvent‐dependent VP QDs. It is found that VP QDs exhibit strong nonlinear optical effect and their nonlinear refractive indexes are comparable to other phosphorus‐based 2D materials. Unlike the previously reported principle of spatial asymmetric light propagation (i.e., a cascaded sample based on SSPM composed of nanomaterials with excellent nonlinear refraction and SnS2 with reverse saturation absorption), the spatial asymmetric light propagation performance based on SSPM is demonstrated using a cascaded sample of VP QDs with significantly different nonlinear optical response prepared in two different solvents. [ABSTRACT FROM AUTHOR]

This work developed DNA amplifier logic gates (AND-OR, OR-AND, FAN-IN, FAN-OUT, and 4-bit square-root circuits) using a flap endonuclease 1 (FEN1)-catalyzed signal amplification reaction, for the fastest and compact DNA computing. Moreover, the logic circuit can use input strands with concentrations of less than 1 nM, which is more than 100 times lower than the input concentration of other DNA logic circuits, providing a promising methodology for constructing fast and compact DNA computations. [ABSTRACT FROM AUTHOR]

Here, we report the results of strain-controlled spin-wave propagation regimes in a double-period multiferroic structure. It consists of an alligator-type magnonic crystal with a period of 250 μm and a piezoelectric layer, featuring a periodic counter-pin-type electrode system with a period of 125 μm. Employing microwave measurements, we acquired the transmission and dispersion of spin waves under various external electric field configurations applied to the piezoelectric layer. The formation of bandgaps in the magnon spectrum and the variation of the spin-wave transmission when altering the configurations of the external electric field are demonstrated. A finite element method reveals that the combination of the non-uniformity in the initial internal magnetic field of the magnonic crystal, which is caused by the presence of periodic alligator-type regions, together with elastic deformations, heightens the amplitude of the modulation of the internal magnetic field. Micromagnetic modeling has demonstrated that this modulation enhancement results in the variation of the spin-wave transmission at the frequency of the magnonic bandgap center of the magnonic crystal. The proposed design of the reconfigurable magnonic crystal creates a condition for the nucleation of the spin-wave bandgap, with further enhancement of the spin-wave reflection from the periodic grating induced by strain. We demonstrate the potential use of the proposed device as a multi-band NAND/NXOR spin-wave based logic gate. [ABSTRACT FROM AUTHOR]

Nucleic acid-based logic gates have shown great potential in biotechnology, medicine as well as diagnostics. Herein, we have constructed pH-responsive logic devices by utilizing HIV-1 TAR hairpins in combination with a thiazole peptide that exhibits turn-on fluorescence upon interacting with TAR RNA or DNA. Based on this, INHIBIT-AND and YES-INHIBIT-AND logic gates were constructed in parallel. The pH alteration leads to conformational changes of the hairpin structure, enabling the construction of a multi-reset reusable logic system which could be developed for in vitro sensing of the HIV-1 viral RNA. [ABSTRACT FROM AUTHOR]

Fluidic logic circuits simplify system design for soft robotics by eliminating bulky components while enabling operation in a range of hostile environments that are incompatible with electronics but at the expense of limited computational capabilities and response times on the order of seconds. This paper presents a four-terminal fluidic transistor optimized for fast switching times, reduced component count, low unit cost, and high reproducibility to achieve complex fluidic control circuits while maintaining flow rates of liters per minute. A ring oscillator using three fluidic transistors achieves oscillation frequencies up to a kilohertz with full signal propagation, tolerating billions of cycles without failure. Fundamental processor circuits like a full adder and a 3-bit analog-to-digital converter require just seven transistors each. A decode circuit drives a high-resolution soft haptic display with refresh times below the human perception threshold for latency, and an electronics-free control circuit performs closed-loop position control of a pneumatic actuator with disturbance rejection, demonstrating the value across domains. [ABSTRACT FROM AUTHOR]

The most important component of implementation of quantum systems is the quantum gate. Efficient implementation of quantum gates is an important challenge for the development of quantum computing. This research is one of the first approaches in the field of implementation of quantum gates by logic gates using crystal photonics. In this paper, a new structure of CNOT quantum gate is designed using two-dimensional photonic crystals and implemented using XOR logic gate. The overall size of this proposed structure based on photonic crystal with silicon rods is equal to 25 × 35 μm, and the response time is equal to 0.53 ps. The proposed structure offers small area and fast response time that makes it suitable for high-speed applications. Separation between input and output ports is one of the features that has been given special attention in the design. [ABSTRACT FROM AUTHOR]

A Janus layered metamaterial (JLM) operating in the terahertz (THz) region is proposed, which increases the direction dimension to manipulate the propagation of electromagnetic waves (EWs) through the introduction of nonlinear Kerr media. It achieves multi-scale multitasking with different logic gates and mode-switching biosensing, making a breakthrough on traditional single-function and single-scale THz devices. Due to the electro-optical effect, the liquid crystal (LC) is adjusted by the electric field, and the sharp transmission peak generated by the located defect mode resonance can be used to realize the forward scale logic product gate and the backward scale exclusive NOR gate. In addition, by locking the sharp transmission peak, the biosensing can have different detection ranges under the LC modulation. Therefore, when EWs propagate forward and backward, the mode switching of different biosensing categories with a glucose concentration of 300–550 g/l, creatinine concentration of 80.9–85.28 μmol/l, and the blood component in refractive index of 1.33–1.38 can be realized. The JLM proposed provides a possibility for the design of the chip-level compact optical integrated circuit and offers a new idea for multi-purpose biomedical detection, owning certain research value. [ABSTRACT FROM AUTHOR]

Longitudinal waves propagate information about the stimulus in multiple dimensions, including the medium density and pressure. Pulses that reversibly cross a phase transition have a nonlinear response that resembles properties of neuronal signaling. This multidimensionality suggests that longitudinal pulses may be harnessed for in-materio computation, mimicking biological or artificial neural algorithms. To explore a feedforward physical neural network using longitudinal pulses, we demonstrate the implementation of (1) a complete set of logic gates, (2) classification of data, and (3) regression of a mathematical function. Our results illustrate the potential of harnessing nonlinear longitudinal waves—common in a plethora of materials—for the purpose of computation. [ABSTRACT FROM AUTHOR]

We construct solutions of the Yang–Baxter equation in any dimension by directly generalizing the previously found solutions for . We equip those solutions with unitarity and entangling properties. Being unitary, they can be turned into -qudit quantum logic gates for qudit-based systems. The entangling property enables each of those solutions, together with all -qudit gates, to form a universal set of quantum logic gates. [ABSTRACT FROM AUTHOR]

Ferrocene has a unique structure, i.e., a central iron atom neatly sandwiched between two cyclopentadienyl rings, which has revolutionized the chemists' views about how metals bind to organic π-systems. This structural arrangement leads to some fascinating chemical and photophysical properties. The last three decades, there were reports about receptor molecules that could be considered to perform simple logic operations via coupling ionic bonding or more complex molecular-recognition processes with photonic (fluorescence) signals. In these systems, chemical binding ('input') results in a change in fluorescence intensity ('output') from the receptor. It has been proven that molecules respond to changes in their environment, such as the presence of various ions, neutral species, pHs, temperatures, and viscosities. Since their first realization by de Silva, molecular logic gates have been intensively experimentally studied, with purely theoretical studies being less common. Here, we present the research that has been conducted on Molecular Logic Gates (MLGs) containing ferrocene and their applications. We categorized such systems into three families of MLGs: long-chain molecules (oligomers or polymers) that incorporate ferrocene, medium-sized molecules that incorporate ferrocene, and systems where ferrocene or its derivatives are used as external additives. Furthermore, MLGs including metal cations without the ferrocene moiety are briefly presented, while computational methodologies for an accurate theoretical study of MLG, including metal cations, are suggested. Finally, future perspectives of MLGs containing ferrocene and their applications are also presented. [ABSTRACT FROM AUTHOR]

An easily synthesizable indole‐derived chromofluorogenic probe InNS has been demonstrated for recognition of trivalent metal ions (i. e. Al3+, Ga3+, In3+ and Fe3+). Both UV‐Vis and emission spectral studies have been employed to assess the cation sensing ability of InNS in semi‐aqueous medium. This probe exhibited a chromogenic response for these metal ions, and the related change was accompanied with the appearance of a new absorption near 376 nm. An obvious color change from pale yellow to dark yellow could also be noticed upon addition of the aforementioned metal ions to the probe's solution. Distinctively from the UV‐Vis analysis, the fluorescence behavior of InNS was completely different; it displayed a 'turn‐on' fluorescence response for only Al3+ among all the studied cations. The detection limit and the association constant (Ka) for Al3+ were determined to be 12.5 nM and 6.85×106 M−1, respectively. A potential 1 : 1 binding mode of Al3+‐InNS has been established based on Job's plot, 1H NMR and DFT analyses. The reversibility experiment was conducted using strongly chelating EDTA ion, and a corresponding logic gate has been devised. In terms of practical applications, the InNS has been utilized to detect Al3+ in human breast carcinoma (MCF‐7) cell lines displaying promising 'turn‐on' bioimaging experiments. [ABSTRACT FROM AUTHOR]

The purpose of this research paper is to present a new all-optical scheme to implement the logical behavior of generalized n th-order (2 n :1) multiplexer logic. The proposed all-optical design is based on micro-ring resonator (MRR)-based all-optical switches and constructed by using "2 n + 1 -2" MRR structures, arranged in a series " n " stage architecture. The presented configuration enjoys advantageous features like compact-sized systematic structure and ultra-fast speed. To validate the logical behavior of the proposed n th-order multiplexer, a second-order (22:1) multiplexer is derived (from the proposed scheme) and discussed. Further, the usability of the presented all-optical multiplexer is demonstrated by developing an all-optical reconfigurable logic gate that can be reconfigured to perform various logic operations. To verify the logical behavior of MRR-based all-optical switch and presented all-optical multiplexer logic, numerical simulations through MATLAB software have been performed. The reported reconfigurable logic structure is also simulated in the MATLAB environment to validate the desired behavior. [ABSTRACT FROM AUTHOR]

The advent of multi-valued logic (MVL) systems provides considerable improvements in energy consumption and computational efficiency compared to binary logic systems. Using resistive random-access memory (RRAM) and carbon nanotube field effect transistors (CNTFETs), this manuscript presents a new design method for ternary logic gates (standard ternary inverter (STI), ternary NOR, and ternary NAND) and some arithmetic circuit applications are implemented based on the proposed ternary logic gates. The simulations of the proposed circuits are carried out in Synopsis HSPICE software by employing 32-nm Stanford CNTFET technology along with the Stanford RRAM model. The robustness of the designed CNTFET-RRAM STI circuit is investigated for variations in process parameters. Simulation results verify that the proposed designs outperform other CNTFET based ternary logic circuits in terms of number of components, power consumption, delay and power delay product (PDP). Furthermore, a reduced change is perceived with respect to power consumption and PDP of the presented logic gates with process deviation, and variations in supply voltage, temperature, capacitance and frequency. The presented STI, TNAND, TNOR, ternary half adder (THA) and ternary multiplier (TMUL) circuits exhibit an improvement in PDP with less transistor count as compared to the other existing designs in the literature. [ABSTRACT FROM AUTHOR]

Stimuli-responsive soft robots offer new capabilities for the fields of medical and rehabilitation robotics, artificial intelligence, and soft electronics. Precisely programming the shape morphing and decoupling the multiresponsiveness of such robots is crucial to enable them with ample degrees of freedom and multifunctionality, while ensuring high fabrication accuracy. However, current designs featuring coupled multiresponsiveness or intricate assembly processes face limitations in executing complex transformations and suffer from a lack of precision. Therefore, we propose a one-stepped strategy to program multistep shape-morphing soft millirobots (MSSMs) in response to decoupled environmental stimuli. Our approach involves employing a multilayered elastomer and laser scanning technology to selectively process the structure of MSSMs, achieving a minimum machining precision of 30 ^m. The resulting MSSMs are capable of imitating the shape morphing of plants and hand gestures and resemble kirigami, pop-up, and bistable structures. The decoupled multistimuli responsiveness of the MSSMs allows them to conduct shape morphing during locomotion, perform logic circuit control, and remotely repair circuits in response to humidity, temperature, and magnetic field. This strategy presents a paradigm for the effective design and fabrication of untethered soft miniature robots with physical intelligence, advancing the decoupled multiresponsive materials through modular tailoring of robotic body structures and properties to suit specific applications. [ABSTRACT FROM AUTHOR]

One of the fundamental steps toward understanding a complex system is identifying variation at the scale of the system's components that is most relevant to behavior on a macroscopic scale. Mutual information provides a natural means of linking variation across scales of a system due to its independence of functional relationship between observables. However, characterizing the manner in which information is distributed across a set of observables is computationally challenging and generally infeasible beyond a handful of measurements. Here, we propose a practical and general methodology that uses machine learning to decompose the information contained in a set of measurements by jointly optimizing a lossy compression of each measurement. Guided by the distributed information bottleneck as a learning objective, the information decomposition identifies the variation in the measurements of the system state most relevant to specified macroscale behavior. We focus our analysis on two paradigmatic complex systems: a Boolean circuit and an amorphous material undergoing plastic deformation. In both examples, the large amount of entropy of the system state is decomposed, bit by bit, in terms of what is most related to macroscale behavior. The identification of meaningful variation in data, with the full generality brought by information theory, is made practical for studying the connection between micro- and macroscale structure in complex systems. [ABSTRACT FROM AUTHOR]

Targeted protein degradation (TPD) is a powerful technique for the regulation of protein homeostasis. Current TPD mainly focuses on the therapeutical consequences rather than the operation processes of the molecular tools. Herein, a platform for precise manipulation of the protein degradation by activatable lysosome targeting DNA nanodevices is constructed. In the design, a lysosome‐targeting CD63 aptamer is locked by the single‐stranded DNA with a photocleavable group and a disulfide bond. This locked CD63 aptamer is connected with the aptamer targeting the protein of interest via double‐stranded DNA linkages to form the logic‐gate activated lysosome targeting DNA nanodevice (LALTD). With the UV light and endogenous GSH as inputs, an AND logic gate is built to efficiently manipulate the protein delivery processes by LALTD. The protein of interest can be degraded via efficient lysosome hydrolysis. Further studies show that the logic‐gate operation can be used for modulating T cell‐mediated antitumor immunity. The modularly designed activatable lysosome targeting DNA nanodevices exhibits good stability, controllability, programmability, and universality, providing a new prospect for accurate protein degradation and precise therapy. [ABSTRACT FROM AUTHOR]

A chromone‐coupled adenine‐based fluorogenic chemosensor (BD1) has been introduced for cascade detection of Zn2+ and HSO4−ions or Zn2+ and picric acid (PA) based on the fluorescence 'OFF‐ON‐OFF' mechanism. A momentous fluorescence improvement has been observed due to the accumulation of Zn2+ ions in the BD1 solution because of the formation of the Zn2+ chelated BD1 complex. A cyan color fluorescence enhancement is visible under the exposure of a 365 nm UV lamp, which is also manifested in the CIE diagram. The detection limit of our developed sensor BD1 and Zn2+−BD1 complex towards the identification of Zn2+ and HSO4− ions are in the nM and μM range, respectively, in the solution phase. Among the several explosive nitroaromatic compounds (NACs), only PA quenches the fluorescence of the Zn2+ chelated BD1 complex, and the nature of quenching is both static and dynamic. A paper strips‐based test kit experiment is performed for on‐spot identification of Zn2+ ions and PA. Based on these chemically encoded inputs and the fluorescence intensity as optical output, we have constructed an INHIBIT molecular logic circuit. The present report evokes a new approach for the development of new chemosensors from bioinspired materials such as adenine, a purine nucleobase. [ABSTRACT FROM AUTHOR]

Carbon nanotubes (CNTs), due to excellent electronic properties, are emerging as a promising semiconductor for diverse electronic applications with superiority over silicon. However, until now, the supposed superiority of CNTs by "head-to-head" comparison within a well-defined voltage range remains unrealized. Here, we report aligned CNT (ACNT)-based electronics on a glass wafer and successfully develop a 250-nm gate length ACNT-based field-effect transistor (FET) with an almost identical transfer curve to a "90-nm" node silicon device, indicating a three-to four-generation superiority. Moreover, a record gate delay of 9.86 ps is achieved by our ring oscillator, which exceeds silicon even at a lower supply voltage. Furthermore, the fabrication of basic logic gates indicates the potential for further digital integrated circuits. All of these results highlight ACNT-based FETs on the glass wafer as an effective solution/platform for further development of CNT-based electronics. [ABSTRACT FROM AUTHOR]

Advancements in DNA computation have unlocked molecular-scale information processing possibilities, utilizing the intrinsic properties of DNA for complex logical operations with transformative applications in biomedicine. DNA computation shows promise in molecular diagnostics, enabling precise and sensitive detection of genetic mutations and disease biomarkers. Moreover, it holds potential for targeted gene regulation, facilitating personalized therapeutic interventions with enhanced efficacy and reduced side effects. Herein, we have developed six DNAzyme-based logic gates able to process YES, AND, and NOT Boolean logic. The novelty of this work lies in their additional functionalization with a common DNA scaffold for increased cooperativity in input recognition. Moreover, we explored hierarchical input binding to multi-input logic gates, which helped gate optimization. Additionally, we developed a new design of an allosteric hairpin switch used to implement NOT logic. All DNA logic gates achieved the desired true-to-false output signal when detecting a panel of miRNAs, known for their important role in malignancy regulation. This is the first example of DNAzyme-based logic gates having all input-recognizing elements integrated in a single DNA nanostructure, which provides new opportunities for building DNA automatons for diagnosis and therapy of human diseases. [ABSTRACT FROM AUTHOR]

The voltage-gated ion channels, also known as ionic transistors, play substantial roles in biological systems and ion-ion selective separation. However, implementing the ultrafast switchable capabilities and polarity switching of ionic transistors remains a challenge. Here, we report a nanofluidic ionic transistor based on carbon nanotubes, which exhibits an on/off ratio of 104 at operational gate voltage as low as 1 V. By controlling the morphology of carbon nanotubes, both unipolar and ambipolar ionic transistors are realized, and their on/off ratio can be further improved by introducing an Al2O3 dielectric layer. Meanwhile, this ionic transistor enables the polarity switching between p-type and n-type by controlled surface properties of carbon nanotubes. The implementation of constructing ionic circuits based on ionic transistors is demonstrated, which enables the creation of NOT, NAND, and NOR logic gates. The ionic transistors are expected to have profound implications for low-energy consumption computing devices and brain-machine interfacing. [ABSTRACT FROM AUTHOR]