Search

The optical characteristics of vertical cylindrical micropillars with AlGaAs distributed Bragg reflectors and InAs/GaAs quantum dots, which are designed for the fabrication of single-photon sources, have been studied. The effect of parameters such as the inclination angle of sidewalls, partial oxidation of AlGaAs layers, and deviation of quantum dots from the central axis of a micropillar on the Purcell factor and the radiation extraction efficiency has been numerically simulated by the finite-difference time-domain method. The allowable ranges of the listed parameters have been determined for cylindrical vertical 920-nm micropillars. The comparison of the calculations performed with the refined refractive indices of the used materials at cryogenic temperatures with the measured characteristics of the fabricated micropillar structures has confirmed the adequacy of the used models.

We have demonstrated that SiC mesastructures with gently sloping sidewalls form with the help of selective reactive ion etching (RIE) of silicon carbide through a photoresist mask (slanted walls are formed during simultaneous etching of SiC and the resistive mask with the edge in the shape of a sharp wedge). A simple geometrical model of etching predicts that the resultant slope of the mesastructure wall must be specified by two parameters, i.e., initial angle of the resistive wedge and the selectivity of SiC etching relative to the photoresist (ratio of etching rates of SiC and photoresist). For experiments, we used polished 4H–SiC wafers with the (0001) orientation. Photoresist regions with an edge angle of 22° were deposited using photolithography onto the Si side of the wafers. Then etching of mesastructures was performed in nitrogen trifluoride in a setup with an inductively coupled plasma. We selected RIE parameters ensuring SiC and photoresist etching with rates of 55 and 160 nm/min, respectively (etching selectivity was 1 : 3). The SiC mesastructures formed by etching have a height of 3.2 μm and gently sloping sidewalls with a slope of about 8°. This technology can be used for preparing high-voltage SiC devices with a straight bevel.

A high-electron-mobility transistor (HEMT) based on InAlAs/InGaAs/InP heterostructures possessing higher breakdown characteristics is developed. An InGaAs composite channel structure, combined with completely selective forming of the double recess structure, is used in the devices. HEMTs with a T‑shaped gate 120 nm in length consist of four fingers, each 30 μm in width, exhibit a maximum transconductance of 810 mS/mm, 460-mA/mm maximum density of drain current and 8- to 10-V drain-to-gate breackdown voltage. The current-amplification cut-off frequency of transistors is over 115 GHz. Due to the enhanced breakdown voltage and the forming of a double recess structure by selective etching, the elaborated transistors are promising for application in the monolithic integrated circuits of the millimeter-wave medium power amplifiers.

We describe the growth, material characterization, and lasing of InP/GaInP quantum dot (QD) microdisks (diameter D = 2.2 [Formula: see text]m, quality factor [Formula: see text]) with an emission lasing line of 693 nm (77 K). We demonstrate that MOVPE growth can result in two types of InP/GaInP QDs, differing in height (type A [Formula: see text]–10 nm, type B [Formula: see text] nm), whose emission has different decay lifetimes ([Formula: see text] ns, [Formula: see text] ns). We show, importantly for technological microlasing applications, that lasing occurs via the excited states of type A QDs, as inferred from a number of experimental results: power-dependent photoluminescence, time-resolved experiments, and temperature dependence of the generation threshold.

The statistics of photon correlations in the emission of single InAs/AlGaAs quantum dots grown by molecular beam epitaxy and fitted with AlGaAs waveguide nanoantennas for efficient extraction of radiation is investigated. A single-photon source for the red spectral range with an average emission rate exceeding 5 MHz and a zero-delay second-order correlation function of g(2)(0) = 0.08 is realized on the basis of these photonic nanostructures. The degree of indistinguishability of consecutively emitted photons measured in Hong-Ou-Mandel interferometry under above-barrier excitation is about 30%.

The growth features of GaN nanorods on patterned c-sapphire substrates with a regular microcone array having a different density and base diameter in the ranges of (1–5) × 107 cm–2 and 2.5–3.5 μm, respectively, are investigated. The kinetics is studied and the selective-growth regimes are determined for single GaN nanorods with a diameter of 30–100 nm at the vertices of microcones under radically lower growth rates on their slopes. The effect of the configuration of microcones, the substrate temperature, the roughness of the initial surface, and the presence of indium as a surfactant on the degree of growth selectivity is investigated.

GaInP microdisks contained InP/GaInP quantum dots having lateral size ∼150 nm and 1-5 μm−2 were investigated with help of microphotoluminescence technique. Experiments carried out in confocal, time-resolved and low-temperature modes. Comparison of results allowed to conclude that overlap of quantum dot emission area with whispering gallery mode antinode results in faster luminescence lifetime (Purcell effect). Whispering gallery mode lasing was detected. Obtained threshold power values were following 6 µW (Q=4500, T=8.5 K) and 0.4 µW (Q=7400, T=80 K).

The site-controlled selective area growth of N-polar GaN nanorods (NR) was developed by plasma-assisted MBE (PA MBE) on micro-cone-patterned sapphire substrates (µ-CPSS) by using a two-stage growth process. A GaN nucleation layer grown by migration enhanced epitaxy provides the best selectivity for nucleation of NRs on the apexes of 3.5-µm-diameter cones, whereas the subsequent growth of 1-μm-high NRs with a constant diameter of about 100 nm proceeds by standard high-temperature PA MBE at nitrogen-rich conditions. These results are explained by anisotropy of the surface energy for GaN of different polarity and crystal orientation. The InGaN single quantum wells inserted in the GaN NRs grown on the µ-CPSS demonstrate photoluminescence at 510 nm with a spatially periodic variation of its intensity with a period of ∼6 µm equal to that of the substrate patterning profile.

The possibility of fabricating hybrid metamorphic heterostructures for vertical-cavity surfaceemitting lasers working in the 1300-nm spectral range is demonstrated. The metamorphic semiconductor part of the heterostructure with a GaAs/AlGaAs distributed Bragg reflector and an active region based on InAlGaAs/InGaAs quantum wells is grown by molecular-beam epitaxy on a GaAs (100) substrate. The top dielectric mirror with a SiO2/Ta2O5 distributed Bragg reflector is formed by magnetron sputtering. The spectra of the room-temperature microphotoluminescence of these vertical-cavity surface-emitting laser heterostructures are studied under 532-nm excitation in the power range of 0–70 mW (with a focused-beam diameter of ~1 μm). The superlinear dependence of the photoluminescence intensity on the excitation power, narrowing of the photoluminescence peaks, and a change in the modal composition may be indications of lasing. The results obtained give evidence that the technology of the metamorphic growth of heterostructures on GaAs substrates can be used for the fabrication of vertical-cavity surface-emitting lasers working in the 1300- nm spectral range.

The emissivity of unstrained quantum-dimensional InP/AlInAs nanostructures and their lasing properties in microdisk cavities prepared by wet etching have been studied. For as-prepared structures, it has been found that they radiate owing to quantum-dimensional InP islands 50–300 nm in diameter. At temperatures below 160 K, whispering gallery modes have been observed in the microdisks. Experimental data on the PL intensity for microcavity modes versus the pump power, which were obtained at liquid helium temperature, have made it possible to find the lasing threshold, 50 W/cm2. The half-width of the laser line at above-threshold powers equals 0.06 nm, which corresponds to a Q factor of 15 000.

It has been shown that the interaction of 1 MeV protons at doses of (0.5–2) × 1014 cm–2 with transistor structures having a 2D AlGaN/GaN channel (AlGaN/GaN HEMTs) is accompanied not only by the generation of point defects, but also by the formation of local regions with a disordered nanomaterial. The degree of disorder of the nanomaterial was evaluated by multifractal analysis methods. An increase in the degree of disorder of the nanomaterial, manifested the most clearly at a proton dose of 2 × 1014 cm–2, leads to several-fold changes in the mobility and electron density in the 2D channel of HEMT structures. In this case, the transistors show a decrease in the source–drain current and an order-of-magnitude increase in the gate leakage current. In HEMT structures having an enhanced disorder of the nanomaterial prior to exposure to protons, proton irradiation results in suppression of the 2D conductivity in the channel and failure of the transistors, even at a dose of 1 × 1014 cm–2.

AbstractWe report on fabrication and studies of composite heterostuctures consisting of an Al_0.55Ga_0.45N/A_l0.8Ga_0.2N quantum well and surface Al nanoislands, grown by plasma-assisted molecularbeam epitaxy on c-sapphire substrates. The influence of a substrate temperature varied between 320 and 700ºC on the size and density of the deposited Al nanoislands is evaluated. The effect of Al nanoislands on decay kinetics of the quantum well middle-ultraviolet photoluminescence has been investigated by time resolved photoluminescence. The samples with the maximum density of Al nanoislands of 10^8 cm^–2 and lateral dimensions in the range of 100–500 nm demonstrated shortening of the photoluminescence lifetime, induced by interaction of the emitting quantum well and the plasmonic metal particles.

We report a realization of room temperature lasing threshold of 1 μW in GaInP microdisk containing a few self-aggregated InP/GaInP quantum dots (QDs) grown by metal-organic vapor phase epitaxy. InP/GaInP QD microdisk cavities emitting in the spectral range of 700–800 nm and having the size of ~2 μm, free spectral range of ~35 nm and quality factors Q ~ 4000 were formed by wet chemical etching. Low dot density (~2 μm–2) and large dot size (~150 nm), suggesting a single dot lasing and maximum overlap of QD and cavity mode, were achieved using deposition of 3 ML of InP layer at 700°C.

The heterostructure design for 1.55 μm range VCSELs is proposed and realized. The wafer fusion technique was used to form the final heterostructure. The growth of AlGaAs/GaAs distributed Bragg reflectors (DBRs) on GaAs substrate and the optical cavity with an active region on InP substrate as well as a tunnel junction (TJ) regrowth was performed by molecular beam epitaxy (MBE). A key feature of the proposed design is the use of n++-InGaAs/p++-InGaAs/p++-InAlGaAs TJ, which allows, due to the effective removal of oxide from the InGaAs surface, to use MBE for re-growth of the TJ surface relief. Despite of the presence in heterostructure a narrow-gap InGaAs layers, a noticeable increase in internal optical loss in lasers can be avoided due to the short-wavelength shift of the edge of interband light absorption in ++-InGaAs layers (Burshtein-Moss effect). Fabricated VCSELs demonstrate single-mode operation with a threshold current less than 2 mA and a slope efficiency of ~ 0.46 W/A, which are comparable with characteristics of VCSELs with n++/p++-InAlGaAs TJ with a similar level of mirror losses.

Studies aimed at optimization of the design of a dielectric distributed Bragg reflector (DBR) produced by the reactive magnetron sputtering method for applications in near-IR vertical-cavity surface-emitting lasers with intracavity contacts (ICC-VCSELs) are carried out. It is shown that the reflectivity of the dielectric DBRs based on SiO2/TiO2 decreases due to the polycrystalline structure of the TiO2 layers, which causes diffusive scattering of light. In contrast, amorphous Ta2O5 layers is characterized by a low surface roughness and low fluctuation in the refractive index. Single-mode ICC-VCSELs in the 980-nm spectral range with dielectric DBR based on SiO2/Ta2O5 with a threshold current less than 0.27 mA, electric resistance of less than 200 Ω, and differential efficiency of more than 0.8 W/A are demonstrated.

The fundamental possibility of achieving temperature stability of laser emitters of 1.3-μm spectral range exhibiting a vertical microcavity and an active region based on InAs/InGaAs quantum dots (QDs) is investigated. It is demonstrated that using an undoped hybrid vertical optical microcavity formed by a lower undoped semiconductor and an upper distributed dielectric Bragg reflectors allows obtaining laser oscillation up to a temperature of ~100°C at nearly constant threshold optical pump power for an active region consisting of QD layers under optimal spectral mismatch between the position of maximum gain of the QD ground state and the resonance wavelength.

The spectral, threshold, and power characteristics of a microdisk laser 31 μm in diameter with an active region based on InAs/InGaAs quantum dots, operating in the continuous-wave (cw) mode at room temperature are studied. The minimum threshold current density is 0.58 kA/cm2, the subthreshold linewidth of the whispering-gallery mode is 50 pm at a wavelength lying in the range of 1.26–1.27 μm. The total power emitted into free space reaches ~0.1 mW in the cw mode, whereas the radiation power of the whispering-gallery modes is ~2.8%.

The polarization characteristics of 850-nm vertical-cavity surface-emitting lasers (VCSELs) with intracavity contacts and a rhomboidal oxide current aperture are studied. It is found that radiation polarization is always directed along the minor diagonal of the rhomboidal aperture (along the [ $$\overline 1 $$ 10] direction) for all single-mode VCSELs. The numerical simulation of carrier transport does not reveal the significant anisotropy of carrier injection to the active region. Furthermore, an analysis of the spatial distribution of the fundamental mode for two orthogonal polarizations within an effective waveguide model shows close transverse optical-confinement factors. Optical loss anisotropy in the asymmetric microcavity and/or gain anisotropy in the strained active region are the most likely mechanisms responsible for fixing the polarization.

Polarization-induced p-type doping of AlGaN layers with high aluminum content during plasmaassisted MBE growth has been studied. It is shown that a gradient of the AlN molar fraction in AlGaN (composition gradient) on a level of 0.005 nm–1 must be set in order to obtain a hole concentration of ~1018 cm–3 (measured by the C–V method) in Al x Ga1–x N:Mg (x = 0.52–0.32) layers with dopant concentration [Mg] = 1.3 × 1018 cm–3. p–i–n photodiodes based on AlGaN heterostructures with such layers as p-emitters showed maximum photoresponsitivity in the solar-blind wavelength range (λ = 281 nm) about 35 and 48 mA/W at reverse bias voltage U = 0 and–5 V, respectively, and exhibited a dark current density of 3.9 × 10–8 A/cm2 at U =–5 V.

We have studied the influence of technological parameters on the surface morphology and development of mechanical stresses in Al(Ga)N layers during their growth by metalorganic vapor phase epitaxy (MOVPE) on sapphire substrates. Minimization of tensile stresses under conditions of a retained atomically smooth surface can be achieved by using a combination of factors including (i) nitridation of substrate in ammonia flow, (ii) formation of two-layer AlN–Al(Ga)N structures by introducing a small amount (several percent) of Ga after growth of a thin AlN layer, and (iii) reduction of ammonia flow during growth of an Al(Ga)N layer.

Microdisk injection lasers on GaAs substrates, with a minimum diameter of 15 μm and an active region based on InAs/InGaAs quantum dots, are fabricated. The lasers operate in the continuous-wave mode at room temperature without external cooling. The lasing wavelength is around 1.27 μm at a minimum threshold current of 1.6 mA. The specific thermal resistance is estimated to be 5 × 10–3 °C cm2/W.

We report on suppression of the Stark effect in (1.5-2)-monolayer(ML)-thick (GaN/AlN)100 multiple quantum well (MQW) structures grown on AlN/c-Al2O3 templates by plasma-assisted molecular beam epitaxy. Different stress relaxation mechanisms are revealed in these structures by using a multi-beam optical stress sensor in comparison with the 5ML-MQW structure. The former (with well thicknesses ⩽2MLs) demonstrate the nearly stress-free growth, whereas the latter structure with thicker wells exhibits the slow stress evolution from the high initial compressive stress to the nearly relaxed state with zero stress. Moreover, the former structures demonstrate a bright room-temperature cathodoluminescence (CL) with the single peak at the shortest wavelength 240 nm (1.5ML-QWs), while the latter shows much weaker multi-peak CL spectra in the spectral range of 270-360 nm.

We describe stress evolution during plasma-assisted molecular beam epitaxy (PAMBE) of AlN nucleation and buffer layers on c-Al2O3 substrates at varying growth temperatures of 780 and 850°C. Moreover, different mechanisms of stress generation in the growing AlN films, related to the processes of grain coalescence and impact of Me-excess during PA MBE by migration enhanced epitaxy and metal-modulated epitaxy, are considered.

Microdisk lasers based on three InGaAsN/GaAs quantum wells with different types of surface passivation are fabricated and studied under optical pumping. Room temperature lasing at 1.3 μm in 7 μm in diameter microdisks with InGaAsN/GaAs QW is demonstrated. We evaluated the thermal resistance as 1 °C/mW. publishedVersion

Heavily Si-doped Al x Ga1–x N mesastrip structures were grown by selective MOVPE technology. Al x Ga1–x N:Si mesastructures with x ~ 0.01–0.07 possess a smoother top and more even side surfaces as compared to those in analogous GaN:Si structures. During the growth of mesastructures with x ~ 0.03–0.07, a thin nanocrystalline AlN deposit appears on the Si3N4 mask. This deposit is not formed during the growth of structures with sufficiently low aluminum content.

This paper presents the results of the electron microscopic study of GaN/AlGaN/AlN/SiC/Si(111) structures grown by the metal-organic vapor phase epitaxy. A SiC epitaxial buffer nanolayer has been grown by a new method of substitution of atoms on the Si(111) substrate. It has been found that there is a strong dependence of the density of dislocations and V-defects on the synthesis conditions of SiC and the thickness of the AlN layer. It has been proved experimentally that the creation of a low-temperature AlN insert with a simultaneous decrease in the thickness of the AlN layer to values of no more than 50 nm makes it possible to almost completely prevent the formation of V-defects in the GaN layer. The density of screw and mixed dislocations in the GaN layer of the studied samples lies in the range from 5 × 109 to 1 × 1010 cm−2. A theoretical model of the formation of V-defects during the growth of GaN has been developed.

Paper presents the comparative analysis of Metal Modulated Epitaxy (MME) and Droplet Elimination by Thermal Annealing (DETA) techniques in the low-temperature plasma-assisted MBE of thick Al x Ga 1− x N layers with the medium Al content ( x =0.4–0.6) grown under the highly metal-rich conditions. Atomically smooth surface with RMS of about 0.4 nm across the area of 2×2 µm 2 has been achieved for AlGaN layers grown at F III / F N flux ratio of 2.5 and substrate temperature of 700 °C by using DETA. The MME growth of AlGaN epilayers leads to their cracking due to the tensile stress introduced by relaxed GaN interlayers which are formed during the nitrogen exposure of the Ga-enriched AlGaN surface. A new technique based on IR-pyrometry measurements has been developed to monitor in situ metal accumulation and depletion on the growth surface.

Sulfide passivation has been used to reduce the surface nonradiative recombination rate in micro- disk mesas based on (AlGaIn)As/GaAS heterostructures the active region of which is constituted either by ten GaAs/AlAs quantum wells or by a sheet of InAs/In0.15Ga0.85As quantum dots. It is shown that passivation leads to a substantial rise in the photoluminescence intensity for mesa structures of all types.

The thermal resistance of AlGaAs/GaAs microlasers of the suspended-disk type with a diameter of 1.7–4 μm and InAs/InGaAs quantum dots in the active region is inversely proportional to the squared diameter of the microdisk. The proportionality factor is 3.2 × 10−3 (K cm2)/W, and the thermal resistance is 120–20°C/mW.

We present a method for determining the diffusion lengths of Ga adatoms on GaN by combining profiling of the tops of GaN stripes obtained by selective area MOCVD and a diffusion growth model. We deduce very high values of the diffusion lengths on tops of -oriented stripes at 1040 °C which range from 6 μm under nitrogen-rich to 24 μm under hydrogen-rich atmosphere in the reactor. The obtained results show in particular that Ga-catalyzed growth of GaN nanostructures and nanowires should not be limited by Ga influx and thus the exceptional growth rate is anticipated in such cases.

In this work we report, to the best of our knowledge, the first quantum well electrically-pumped microdisk lasers monolithically deposited on (001)-oriented Si substrate. The III-V laser structure was epitaxially grown by MOCVD on silicon with an intermediate MBE-grown Ge buffer. Microlasers with an InGaAs/GaAs quantum well active region were tested at room temperature. Under pulsed injection, lasing is achieved in microlasers with diameters of 23, 27, and 31 µm with a minimal threshold current density of 28 kA/cm2. Lasing spectrum is predominantly single-mode with a dominant mode linewidth as narrow as 35 pm.

The ability to create metamorphic hybrid heterostructure of 1300 nm spectral band VCSEL is demonstrated. Metamorphic semiconductor part of heterostructure with GaAs/AlGaAs DBR and InAlGaAs/InGaAs QW active region has been grown by molecular beam epitaxy (MBE) on GaAs (100). Top dielectric SiO2/Ta2O5 DBR is made by the magnetron sputtering method. VCSEL has been studied under optical pumping (λ = 532 nm, diameter of the focused laser beam of ~ 1 μm) by using micro-PL setup in the range of optical pump power 0 – 70 mW at room temperature. Presence of the superlinear PL intensity growth having threshold-like dependence of PL integral intensity together with the PL peaks narrowing and mode composition modification with the pumping density increasing could be attributed to lasing behavior of the structure. Obtained results indicate the opportunity to use metamorphic growth on GaAs substrates for the 1300 nm range VCSEL manufacturing.

Formation, emission, and lasing properties of strain-free InP(As)/AlInAs quantum dots (QDs) embedded in AlInAs microdisk (MD) cavity were investigated using transmission electron microscopy and photoluminescence (PL) techniques. In MD structures, the QDs have the nano-pan-cake shape with the height of similar to 2 nm, the lateral size of 20-50 nm, and the density of similar to 5-10(9) cm(-2). Their emission observed at similar to 940 nm revealed strong temperature quenching, which points to exciton decomposition. It also showed unexpected type-I character, indicating In-As intermixing as confirmed by band structure calculations. We observed lasing of InP(As) QD excitons into whispering gallery modes in MD having the diameter of similar to 3.2 lm and providing a free spectral range of similar to 27 nm and quality factors up to Q similar to 13 000. Threshold of similar to 50 W/cm(2Y) and spontaneous emission coupling coefficient of similar to 0.2 were measured for this MD-QD system. Published by AIP Publishing.

We report on microdisk lasers based on GaInNAs(Sb)/GaAs(N) quantum well active region. Their characteristics were studied under electrical and optical pumping. Small-sized microdisks (minimal diameter 2.3 μm) with unprotected sidewalls show lasing only at temperatures below 220 K. Sulfide passivation followed by SiNx encapsulation allowed us achieving room temperature lasing at 1270 nm in 3 μm GaInNAs/GaAs microdisk and at 1550 nm in 2.3 μm GaInNAsSb/GaAsN microdisk under optical pumping. Injection microdisk with a diameter of 31 μm based on three GaInNAs/GaAs quantum wells and fabricated without passivation show lasing up to 170 K with a characteristic temperature of T0 = 60 K. publishedVersion

We demonstrate that quantum dot microdisk lasers are able to operate under continuous wave current injection at 100 °C. We also present a novel method for increasing a side mode suppression ratio in microdisk lasers. publishedVersion

Vertical-cavity surface-emitting lasers (VCSELs) are low-cost high-performance light sources for high-speed data communication systems, optical interconnects and different sensors [1]. New VCSEL applications (spectroscopy, compact atomic clock) require single-mode operation with stable linear polarization combined with high temperature stability. While conventional GaAs-based VCSELs with small selectively-oxidized current apertures demonstrate stable fundamental transverse mode operation they have unstable polarization due to cylindrical symmetry and isotropic gain. Currently the most popular method for VCSEL polarization control is based on precise etching of sub-wavelength grating in output distributed Bragg reflector [2]. Drawbacks of this approach are relatively complicated fabrication technology and limited output power. In this work we discuss alternative approach for single-mode polarization-stable VCSELs based on rhomboidal selectively-oxidized current aperture combined with intracavity contacts.

In this work, electrically-injected microdisk lasers with diameter varied from 15 to 31μm based on an InAs/InGaAs QD active region have been fabricated and tested in continuous wave regime. At room temperature, lasing is achieved at wavelength around 1.26…1.27 μm with threshold current density about 900 A/cm 2 . Specific series resistance is estimated to be about 10 -4 Ohm•cm 2 . The lasers were tested at elevated temperatures. Lasing is achieved up to 100°C with threshold current of 13.8mA and lasing wavelength of 1304nm in device with 31μm diameter. To the best of our knowledge, this is the highest CW lasing temperature and the longest lasing wavelength ever reported for injection QD microdisk/microring lasers on GaAs substrates. Emission spectrum demonstrates single-mode lasing with side mode suppression ration of 24dB and dominant mode linewidth of 35pm. The far field radiation pattern demonstrates two narrow maxima off the disk plane. A combination of device characteristics achieved (low threshold, long wavelength, operation at elevated temperatures) makes them suitable for application in future optoelectronic circuits for optical interconnect systems.

AlInAs microdisk cavities having quality factor Q ~ 15 000 were fabricated from lattice-matched InP/AlInAs (interface/aggregation) quantum dot (QD) structures using wet chemical etching. The QD emission coupled to whispering gallery modes was observed at spectral range 920 - 1000 nm at temperatures of 10 - 160 K. The laser generation with threshold power density of 50 W/cm2 at T = 10 K was observed under optical pumping. It was found that the spontaneous emission coupling factor β equals 0.23 for these microdisks. The low temperature lasing operation and the small coupling factors observed suggest the existence of small QDs formed at the InP/InAlAs interface as the main active elements.

The paper describes experimental study of stress relaxation and generation in (1-2)-μm-thick GaN and AlGaN layers grown on AlN/c-Al2O3 buffer layers by low temperature (

We demonstrate a Schottky ultraviolet photodiode (UV-PD) and a UV light-emitting diode (UV-LED) based on AlGaN heterostructures grown by plasma-assisted molecular beam epitaxy. The spectral responsivity of the Schottky UV-PD is 3 mA/W at 271 nm at zero bias and decreases by two orders of magnitude for the spectral range of longer wavelengths ( > 300 nm). The sub-monolayer digital alloying technique was used for growing the AlGaN quantum wells in UV-LEDs emitting a single electroluminescence peak at 273 nm.

We report a novel approach for metal organic vapor phase epitaxy of (Al)GaN heterostructures on Si substrates. An approximately 90–100 nm thick SiC buffer layer is synthesized using the reaction between Si substrate and CO gas. High-resolution transmission electron microscopy reveals sharp crystalline interfaces with epitaxial relationship between SiC/Si and AlN/SiC layers. Optimization of SiC morphology and AlN seed layer thickness facilitates the growth of GaN layers free of pits (v-defects). It is also found that Si doping eliminates these defects in the case of growth on SiC templates with non-optimized surface morphology. Thus, synthesis of thin SiC buffer layer is suggested as a solution for the interface problems at the initial stage of III-N on Si epitaxy.

Authors represent utilizing UHV Ga FIB for preparing a Si3N4/GaN substrate for submicron selective-area epitaxy. In result, GaN submicron stripes were grown in the 100, 200 and 500 nm windows of a Si3N4 mask layer. SEM investigations show good crystalline perfection of the grown stripes.

We present detailed studies of optically pumped InAs/InGaAs quantum dot based racetrack microlasers with 3.5-μm bend radius operating at room temperature. Q factor over 8000 and room temperature threshold power in the mW-range were achieved in the racetrack microlasers with straight section length ranging from 0 to 4 μm. A systematic investigation of the influence of the racetrack straight section length on spatial distribution of optical modes is presented. The microcavity eigenmodes and electromagnetic field distribution calculated by means of three-dimensional numerical simulation demonstrate a good agreement with the experimental results obtained by micro-photoluminescence and scanning near-field optical microscopy. The racetracks demonstrate zigzagging behavior of the modes inside the cavity and the energy switching between the radial maxima in second-order modes. Higher-order modes are found to be suppressed in micro-photoluminescence spectra.

A 31 µm in diameter microdisk laser with an InAs/InGaAs quantum dot active region has been tested in the continuous-wave regime at elevated temperatures. Lasing is achieved up to 100°C with a threshold current of 13.8 mA. The emission spectrum demonstrates single-mode lasing at 1304 nm with a side mode suppression ratio of 24 dB and a dominant mode linewidth of 35 pm.

The possible mechanisms of the polarization control in single-mode intracavity- contacted vertical-cavity surface-emitting lasers (IC-VCSELs) with the rhomboidal selectively- oxidized current aperture were investigated. It was found that the lasing emission polarization of all single-mode VCSELs is fixed along the minor diagonal of the rhomboidal-shape aperture (the [110] direction). Numerical modelling of carrier transport did not reveal any sufficient injection anisotropy in the laser active region, while the transverse optical confinement factors calculated for the fundamental mode with two orthogonal polarizations are identical. Optical loss anisotropy and/or gain anisotropy are the most likely mechanisms of inducing the polarization fixation.

Complex influence of photon lifetime (controlled by the mirror loss) and aperture size on the performance of 850 nm InGaAlAs oxide-confined vertical-cavity surface-emitting lasers (VCSELs) with fully doped AlGaAs-based distributed Bragg reflectors (DBR) was investigated. We find a tradeoff between photon lifetime and gain nonlinearity for maximizing the optical bandwidth, leading to the optimum aperture size close to 4-6 μm. In spite of the reduced photon lifetime (from 4 ps to 1 ps), the excess damping caused by the current-induced self-heating limits the ultimate modulation bandwidth for the given VCSELs design at 24-25 GHz. Further improvement in high frequency characteristics can be facilitated by decrease of the heat generation and improvement of the heat removal from the active region as well as by proper engineering of the scattering loss at the oxide aperture while keeping the low capacitance optimizing design of the oxide aperture.

Multifractal analysis was applied to characterize quantitatively nanostructural disordering in HVPE-grown AlGaN/GaN UV LED structures. A higher level of leakage currents shunting the active region of LEDs by an extended defect system is correlated with higher values of multifractal parameters (MFs). As a result, the concentration of injected carriers participating in radiative recombination in the active region is reduced. MFs and the conductivity of quasi-ohmic shunts localized in an extended defect system are higher in AlGaN/GaN structures than in InGaN/GaN structures. It is one of the reasons behind the low external quantum efficiency of AlGaN/GaN UV LEDs.

Microdisk lasers based on novel InGaAsNSb/GaAsN quantum well active region are developed and studied under optical pumping. Room temperature lasing at 1.55 μm in 2.3 μm in diameter microdisks with InGaAsNSb/GaAsN QW is demonstrated.

Sulphide passivation was used for reducing the surface recombination velocity of microdisk mesas based on (AlGaIn)As/GaAs heterostructures with active region formed either by ten GaAs/AlAs quantum wells or by 1 layer of InAs/In0.15Ga0.85As quantum dots. It was demonstrated that the sulfide passivation results in substantial increase of photoluminescence intensity in all types of the mesa-structures studied.