Search

Publisher Copyright: © 2022, The Author(s). Direct fire, indirect heat, and extinguishing water cause great damage to cultural assets upon a fire disaster in a library or archive. Conservation and restoration of heat-damaged papers are particularly challenging due to the complexity and severity of the damage. Since valuable originals obviously cannot be used for the development of treatment methods and only to a limited extent for the analysis of the damage, it is necessary to produce model paper materials that have a high degree of similarity to fire-damaged papers, which was addressed in the present study. Three different heating methods were tested to produce model papers of different heating levels. Their altered optical, structural, and chemical properties were analyzed and compared with the results of original fire-damaged samples. The study points out pathways to enable the production of comparable sample materials. Heating between hot plates or in an oven produces papers that have properties quite similar to the originals in terms of surface area, paper structure, cellulose integrity, and interactions with water. Stack heating in the oven has proven to be a particularly effective manufacturing method for larger quantities of model papers.

In this work, we present for the first time, a simplified fabrication of a laminated paper-based analytical device (LPAD) with a free-mobile app, Palette Cam, for image analysis. A filter paper is cut in a rectangular shape (9 × 3 cm) and placed between a top laminating sheet with punched holes and a bottom laminating sheet. The holes allow accessibility of liquid on the paper. Thermal lamination is then employed to complete the fabrication of LPAD. Our simplified design reduces a tedious alignment of small pieces of paper to the holes. We demonstrated the LPAD with an analysis of salicylic acid in pharmaceutical products. Each 4 μL of ferric reagent and sample was dispensed on the LPAD. Smartphone was used to capture images. The RGB (red green blue) color intensity from the Palette Cam was converted into a logarithm color ratio. Our LPAD is simplified, cost-effective and able to be a portable device.

This column is intended to address the kinds of knotty problems and dilemmas with which many scholars grapple in studying health professions education. In this article, the authors address the question of why papers may be desk rejected (rejected without going out for formal peer review) and describe simple steps for authors to optimize their work so it gets past the desk reject stage. Submitted/Accepted version

The prevalence of diabetes has increased over the past years. Therefore, developing minimally invasive, user-friendly and cost-effective glucose biosensors is necessary especially in low-income and developing countries. Cellulose paper-based analytical devices have attracted the attention of many researchers due to affordability, not requiring trained personnel, and complex equipment. This paper describes a microfluidic paper-based analytical device for the detection of glucose in tear with the naked eye. The paper-based biosensor fabricated by laser CO2, and GOx/HRP enzymatic solution coupled with TMB was utilized as reagents. A sample volume of 10 µl was needed for the biosensor operation and the results were observable within 5 minutes. To evaluate the device performance, color intensity-based and distance-based results were analyzed by ImageJ and Tracker. Distance-based results showed a linear behavior in the range of 0.1–0.6 mM with an R2 = 0.967 and LOD of 0.2 mM. The results could be perceived by the naked eye without any need to further equipment or trained personnel in a relatively short time (3–5 minutes). Moreover, glucose concentration could be obtained non-invasively by tears collected by this µPAD.

Is it really better to print everything, including software models, or is it better to view them on screen? With the ever increasing complexity of software systems, software modeling is integral to software development. Software models facilitate and automate many activities during development, such as code and test case generation. However, a core goal of software modeling is to communicate and collaborate. Software models are presented to team members on many mediums and two of the most common mediums are paper and computer screens. Reading from paper or screen is ostensibly considered to have the same effect on model comprehension. However, the literature on text reading has indicated that the reading experiences can be very different which in turn effects various metrics related to reader performance. This paper reports on an experiment that was conducted to investigate the effect of reading software models on paper in comparison with reading them on a computer screen with respect to cognitive effectiveness. Cognitive effectiveness here refers to the ease by which a model reader can read a model. The experiment used a total of 74 software engineering students as subjects. The experiment results provide strong evidence that displaying diagrams on a screen allows subjects to read them quicker. There is also evidence that indicates that on screen viewing induces fewer reading errors.

Funding Information: Open access funding provided by FCT|FCCN (b-on). This work was financed by national funds from Fundação para a Ciência e a Tecnologia (FCT), I.P., in the scope of the projects LA/P/0037/2020, UIDP/50025/2020, and UIDB/50025/2020 of the Associate Laboratory Institute of Nanostructures, Nanomodelling and Nanofabrication–i3N and by FEDER funds through the COMPETE 2020 Program and National Funds through Portuguese Foundation for Science and Technology under projects POCI-01–0145-FEDER-007688, UID/CTM/50025 and by ERC AdG grant from the project DIGISMART (ERC-AdG-2017, GA 787410). J.C. would like to acknowledge FCT/MCTES for his present research contract with reference CEECIND/00880/2018. R.C. acknowledges funding from i3N-FCT I.P. through the PhD Grant UI/BD/151295/2021. S. S. and T. P. also acknowledge the funding from National Foundation for Science and Technology, through the PhD Grants SFRH/BD/149751/2019 and 2020.08606.BD, respectively. Publisher Copyright: © 2022, The Author(s). Laser-induced graphene (LIG) is as a promising material for flexible microsupercapacitors (MSCs) due to its simple and cost-effective processing. However, LIG-MSC research and production has been centered on non-sustainable polymeric substrates, such as polyimide. In this work, it is presented a cost-effective, reproducible, and robust approach for the preparation of LIG structures via a one-step laser direct writing on chromatography paper. The developed strategy relies on soaking the paper in a 0.1 M sodium tetraborate solution (borax) prior to the laser processing. Borax acts as a fire-retardant agent, thus allowing the laser processing of sensitive substrates that other way would be easily destroyed under the high-energy beam. LIG on paper exhibiting low sheet resistance (30 Ω sq−1) and improved electrode/electrolyte interface was obtained by the proposed method. When used as microsupercapacitor electrodes, this laser-induced graphene resulted in specific capacitances of 4.6 mF cm−2 (0.015 mA cm−2). Furthermore, the devices exhibit excellent cycling stability (> 10,000 cycles at 0.5 mA cm−2) and good mechanical properties. By connecting the devices in series and parallel, it was also possible to control the voltage and energy delivered by the system. Thus, paper-based LIG-MSC can be used as energy storage devices for flexible, low-cost, and portable electronics. Additionally, due to their flexible design and architecture, they can be easily adapted to other circuits and applications with different power requirements. Graphical Abstract: [Figure not available: see fulltext.] publishersversion published

The membraneless-gas separation microfluidic paper-based analytical device (ML-GS μPAD), consisting of donor, spacer, and acceptor layers, was developed to monitor total ammonia in fish pond water. The principle of the analysis involved the addition of sodium hydroxide solution to the sample zone in the donor layer containing ammonia/ammonium, and the produced ammonia gas diffuses through the spacer to the detection zone in the acceptor layer containing red rose extract to produce a color change from pink to blue corresponding to the ammonia/ammonium concentration. Under optimum conditions, the proposed method provided good linearity of ammonia in the range concentration of 0-100 mg L

The existence of pesticide residues in the hydrosphere, biosphere, and anthroposphere can cause acute or chronic diseases and deteriorate the environment. Therefore, efficient detection of pesticide residues is of great significance to prevent food poisoning, control food pollution, and protect human lives by recognizing their distribution and concentration. Herein, a novel smartphone-coupled three-layered paper-based microfluidic chip is proposed as a facile platform to detect the pesticides. The stereoscopic capillary-driven fluid transport is enabled by the three-layered microfluidic chip configuration. The detection mechanism is based on the enzyme inhibition reaction and the chromatic reaction. The detection results are obtained by a smartphone and figured out by colorimetric quantitative analysis. Taking advantages of the above merits, we demonstrate the utilization of this smartphone-coupled three-layered paper-based microfluidic chip for the effective analysis of typical pesticides (profenofo and methomyl). The linear ranges of profenofo and methomyl are 0.27-2.1 μmol L

Research on text comprehension in relation to the reading medium (paper or screen) has mainly involved undergraduate or high school students. To advance current knowledge on the effects of reading medium, this longitudinal study focused on beginner readers, specifically, the role of precursors in first graders’ comprehension of narrative and expository linear texts from reading on paper and computer screen. Working memory and inference skills as cognitive precursors and basic digital skills were measured at the end of preschool (T1); reading text comprehension and word reading, as a control variable, were measured at the end of the first grade (T2). Sixty-three children participated in total. The first graders read four texts, one narrative and one expository, on both paper and computer screen, in a counterbalanced order. Results showed no main effects of the reading medium or text genre, but the interactive effect of these variables was significant. At T2, the children had higher comprehension scores after reading narrative than descriptive texts from paper. In addition, reading from the screen was preferred at post-test, after all texts were presented. As precursors, working memory and inference skills predicted both printed and digital text comprehension. In contrast, basic digital skills predicted only digital text comprehension after controlling for medium, text genre, and word reading.

Million tons of cellulosic paper have been used for insulating coils in oil-filled electrical power transformers, thereby assuring the electricity supply for our societies. The high working temperatures in transformers constantly degrade paper insulators throughout their service life of up to 40 years. We approached the structural changes in oil-immersed cellulosic paper samples upon thermal stress in a study that compared unbleached softwood Kraft paper used as insulator paper with pure cotton cellulose paper. The model experiments used a thermal treatment in transformer oil at 170 °C for up to 14 days. The samples were characterized by means of 13C CP/MAS NMR spectroscopy, mainly based on deconvolution of the C4 resonance. An automated, fast, and reproducible C4 resonance deconvolution employing the “Peak Analyzer” tool of OriginPro 2020 (OriginLab Corporation, USA) was developed and used to exploit 13C CP/MAS NMR spectroscopy for the characterization of thermally stressed paper samples. Our results show that thermally induced structural changes depend heavily on the composition of paper, that hornification and coalescence of fibrils take place, and that the allomorph composition of cellulose crystallites is altered under the given conditions. Graphical abstract

Point-of-care testing (POCT), as a portable and user-friendly technology, can obtain accurate test results immediately at the sampling point. Nowadays, microfluidic paper-based analysis devices (μPads) have attracted the eye of the public and accelerated the development of POCT. A variety of detection methods are combined with μPads to realize precise, rapid and sensitive POCT. This article mainly introduced the development of electrochemistry and optical detection methods on μPads for POCT and their applications on disease analysis, environmental monitoring and food control in the past 5 years. Finally, the challenges and future development prospects of μPads for POCT were discussed.

Paper has been widely employed as cheap material for the development of a great number of sensors such as pregnancy tests, strips to measure blood sugar, and COVID-19 rapid tests. The need for new low-cost analytical devices is growing, and consequently the use of these platforms will be extended to different assays, both for the final consumer and within laboratories. This work describes a paper-based electrochemical sensing platform that uses a paper disc conveniently modified with recognition molecules and a screen-printed carbon electrode (SPCE) to achieve the detection of gluten in a deep eutectic solvent (DES). This is the first method coupling a paper biosensor based on aptamers and antibodies with the DES ethaline. Ethaline proved to be an excellent extraction medium allowing the determination of very low gluten concentrations. The biosensor is appropriate for the determination of gluten with a limit of detection (LOD) of 0.2 mg L−1 of sample; it can detect gluten extracted in DES with a dynamic range between 0.2 and 20 mg L−1 and an intra-assay coefficient of 10.69%. This approach can be of great interest for highly gluten-sensitive people, who suffer from ingestion of gluten quantities well below the legal limit, which is 20 parts per million in foods labeled gluten-free and for which highly sensitive devices are essential. Graphical abstract

The increasing demand for food and the need for a sustainability vision in the agri-food sector have boosted novel approaches for food management, enhancing the valorization of wastes and by-products belonging to the food industry. Herein, we present a novel paper-based origami device to assess the amount of both glucosinolate and glucose in a food waste product belonging to Brassicaceae plants, to evaluate the quality value and the correct management of waste samples. The device has been designed as an origami paper-based platform constituted of two paper-based biosensors to work synergistically in a multiplexed detection. In detail, a monoenzymatic biosensor and a bienzymatic biosensor were configured for the detection of glucose and glucosinolates, respectively, using filter paper pads preloaded with glucose oxidase and/or myrosinase. To complete the paper-based platform, the enzyme-preloaded pads were combined with office paper-based electrodes modified with Carbon black/Prussian Blue nanoparticles for the measurement of enzymatic by-product at a low applied potential (i.e., 0 V versus Ag/AgCl). Overall, this paper-based platform measured glucose and glucosinolate (i.e., sinigrin) with a linear range up to 2.5 and 1.5 mM, and detection limits of 0.05 and 0.07 mM, respectively. The repeatability corresponded to an RSD% equal to 5% by testing 10 mM of glucose, and 10% by testing 1 mM of sinigrin. The accuracy of the developed multiplex device was evaluated by recovery studies at two different levels of sinigrin, i.e., 0.25 and 0.5 mM, obtaining recoveries values equal to (111 ± 3) % and (86 ± 1) %, respectively. The multiplex detection of both glucose and glucosinolate in Brassicaceae samples evaluates the quality values of the waste sample, ensuring the quality of the re-used food product waste by using an eco-designed analytical tool. The combination of paper-based devices for quality control of food waste with the re-use of these food products represents a sustainable approach that perfectly matches sustainable agrifood practices as well as the overall approach of the circular economy. Graphical abstract

A series of new coloring materials in nanoscale based on 5-(2-aminothiazol-5-yl) thiazol-2-amine and 5-(4-aminophenyl) thiazol-2-amine were synthesized. The nanoscale pigments were prepared using a grinding high˗energy ball-milling technique. X-ray diffraction and transmission electron microscopy were employed to determine the particle size of the nanoscale pigments (40–80 nm). The synthesized pigments in normal and nanoscale were applied in the printing of polyester fabrics. The fastness and colorimetric properties of the printed samples were carefully studied. Additionally, the synthesized pigments were applied as water-based flexographic ink for paper and carton. The hue of the color pigments L*, a*, b*, glossiness, and fastness to light were measured. The comparison of the new heterocyclic benzidine analogs in normal and nanoscale with commercial benzidine pigments demonstrated better results, particularly for the nanoscale pigments.

SummaryInhibitors of the cyclin-dependent kinases 4/6 (CDK4/6i) have been practice-changing and are now considered the standard of care in combination with endocrine therapy for the first- or second-line treatment in advanced hormone-receptor-positive, human epidermal growth factor receptor 2‑negative breast cancer. Recently, CDK4/6i have also emerged as an appealing targeted cancer therapy in early breast cancer, however results of large clinical trials are controversial. This position paper summarizes the evidence, and provides guidance for clinical practice.

Magnetic Resonance Imaging linear-accelerator (MRI-linac) equipment has recently been introduced to multiple centres in Australia and New Zealand. MRI equipment creates hazards for staff, patients and others in the MR environment; these hazards must be well understood, and risks managed by a system of environmental controls, written procedures and a trained workforce. While MRI-linac hazards are similar to the diagnostic paradigm, the equipment, workforce and environment are sufficiently different that additional safety guidance is warranted. In 2019 the Australasian College of Physical Scientists and Engineers in Medicine (ACPSEM) formed the Magnetic Resonance Imaging Linear-Accelerator Working Group (MRILWG) to support the safe clinical introduction and optimal use of MR-guided radiation therapy treatment units. This Position Paper is intended to provide safety guidance and education for Medical Physicists and others planning for and working with MRI-linac technology. This document summarises MRI-linac hazards and describes particular effects which arise from the combination of strong magnetic fields with an external radiation treatment beam. This document also provides guidance on safety governance and training, and recommends a system of hazard management tailored to the MRI-linac environment, ancillary equipment, and workforce.

Iron is an important micronutrient involved in several mechanisms in the human body and can be an important biomarker. In this work, a simple and disposable microfluidic paper-based analytical device (µPAD) was developed for the quantification of iron in urine samples. The detection was based on the colorimetric reaction between iron(II) and bathophenanthroline and the reduction of iron(III) to iron(II) with hydroxylamine. The developed µPAD enabled iron determination in the range 0.07–1.2 mg/L, with a limit of detection of 20 µg/L and a limit of quantification of 65 µg/L, thus suitable for the expected values in human urine. Additionally, targeting urine samples, the potential interference of the samples color was overcome by incorporating a sample blank assessment for absorbance subtraction. Stability studies revealed that the device was stable for 15 days prior to usage and that the formed colored product was stable for scanning up to 3 h. The accuracy of the developed device was established by analyzing urine samples (#26) with the developed µPAD and with the atomic absorption spectrometry method; the relative deviation between the two sets of results was below 9.5%. Graphical abstract: [Figure not available: see fulltext.]

The adsorption of locust bean gum (LBG) onto Northern Bleached Softwood Kraft (NBSK) pulp improved paper tensile and burst strength and lowered refining energy by strengthening inter-fibre bonding. Adsorption kinetics and isotherms were investigated to develop a fundamental understanding of the adsorption mechanism. The adsorption rate followed pseudo-second-order kinetics and the activation energy was 99.34 kJ·mol−1, suggesting chemisorption. The adsorption rate constant increased rapidly with temperature from 25 to 45 °C (k = 1.93 to 24.03 g·mg−1·min−1), but the amount adsorbed at equilibrium decreased (qe = 1.91 to 0.48 mg·g−1 o.d. fibre). LBG adsorption to NBSK at 25 °C was consistent with the Langmuir adsorption model for LBG n = 5.00, and the equilibrium constant Kf = 2.57 mg·g−1·(mg·L−1)−1/n at 25 °C. Favorable adsorption conditions for negatively charged LBG were identified: 25 °C for 10 min, low dosage level ( 150 r.p.m.), acidic or neutral conditions (pH 2–7) without salt addition. Graphic abstract

Free-standing reduced graphene oxide (rGO) papers were prepared by chemical reduction, thermal reduction and combined chemical-thermal reduction, respectively. Four-point probe and nanoindentation experiments were conducted to investigate the electrical and mechanical properties of rGO papers. The rGO paper prepared by soaking in L-ascorbic acid and thermal annealing in argon at 1000 °C (labeled rGO-AsA-T) showed superior electrical and mechanical properties when compared with rGO papers prepared merely by chemical reduction or thermal reduction. The as-prepared rGO-AsA-T paper exhibited an electrical conductivity of 5.7 × 104 S/m, showing an increase of 90% compared to that in the thermally annealed rGO paper and nearly 40 times that of rGO paper reduced by L-ascorbic acid. It was also found that the rGO-AsA-T paper had the lowest elastic modulus of 288 MPa, showing enhanced flexibility. The nearly free voids in rGO-AsA-T paper proved by scanning electron microscopy (SEM) were due to the capillary action in chemical reduction and were significant in improving the electrical conductivity and flexibility of the paper. The rGO-AsA-T paper with high conductivity and flexibility has a promising application in flexible electronics.

The outbreak of new viral strains promotes advances in universal diagnostic techniques for detecting infectious diseases with unknown viral sequence. Long double-stranded RNA (dsRNA), a hallmark of infections, serves as a virus marker for prompt detection of viruses with unknown genomes. Here, we report on-chip paper electrophoresis for ultrafast screening of infectious diseases. Negatively charged RNAs pass through the micro and nanoscale pores of cellulose in order of size under an external electric field applied to the paper microfluidic channel. Quantitative separation of long dsRNA mimicking poly I:C was analyzed from 1.67 to 33 ng·μL−1, which is close to the viral dsRNA concentration in infected cells. This paper-based capillary electrophoresis chip (paper CE chip) can provide a new diagnostic platform for ultrafast viral disease detection at the point-of-care (POC) level.

High per- and polyfluorinated alkyl substance (PFAS) concentrations have been detected in agricultural soils in Southwest Germany. Discharges of PFAS-contaminated paper sludge and compost are suspected to be the cause of the contamination. Perfluorinated carboxylic acids (PFCAs) have been detected also in groundwater, drinking water, and plants in this area. Recently, previously unknown compounds have been identified by high-resolution mass spectrometry (HRMS). Major contaminants were polyfluorinated dialkylated phosphate esters (diPAPs) and N-ethyl perfluorooctane sulfonamide ethanol–based phosphate diester (diSAmPAP). In this study, HRMS screening for PFAS was applied to 14 soil samples from the contaminated area and 14 impregnated paper samples which were from a similar period than the contamination. The paper samples were characterized by diPAPs (from 4:2/6:2 to 12:2/12:2), fluorotelomer mercapto alkyl phosphates (FTMAPs; 6:2/6:2 to 10:2/10:2), and diSAmPAP. In soil samples, diPAPs and their transformation products (TPs) were the major contaminants, but also FTMAPs, diSAmPAP, and their TPs occurred. The distribution patterns of the carbon chain lengths of the precursor PFAS in soil samples were shown to resemble those in paper samples. This supports the hypothesis that paper sludge is a major source of contamination. The presence of major degradation products like PFCAs, FTSAs, or PFOS and their distribution of carbon chain lengths indicate the activity of biotic or abiotic degradation processes and selective leaching processes from the upper soil horizons. Graphical abstract Supplementary Information The online version contains supplementary material available at 10.1007/s00216-021-03463-9.

Infections caused by resistant microorganisms are a complex global public health challenge, and the way to combat the increase of resistance is the development of more modern and faster techniques for resistance detection. This study aimed to evaluate the transport of inactivated bacteria impregnated in a filter paper disk to detect carbapenem resistance genes by multiplex real-time PCR (qPCR) using high-resolution melting (HRM). A total of 88 isolates of 10 different species of Enterobacterales harboring well-characterized carbapenem resistance genes were evaluated. A full 10-µL loop of fresh growth of bacteria were impregnated in a filter paper disk, which was left at room temperature for 2 days in order to simulate the time spent in transportation. Bacterial inactivation was performed with 70% ethanol at 15 min. Afterwards, the DNA was extracted from the paper disks for further analysis by qPCR HRM. The time of 15 min in 70% ethanol was enough to inactivate all the isolates tested. It was possible to correctly identify the presence of the carbapenem resistance gene by HRM qPCR in 87 isolates (98.87%) that were transported in the filter paper disks. Our results indicated that it is possible to use filter paper to transport inactivated bacteria and to identify carbapenem resistance genes by qPCR HRM. This alternative tends to facilitate the access to this technology by many laboratories which do not have the qPCR equipment.

Malnutrition, muscle loss, and cachexia are prevalent in cancer and remain key challenges in oncology today. These conditions are frequently underrecognized and undertreated and have devastating consequences for patients. Early nutrition screening/assessment and intervention are associated with improved patient outcomes. As a multifaceted disease, cancer requires multimodal care that integrates supportive interventions, specifically nutrition and exercise, to improve nutrient intake, muscle mass, physical functioning, quality of life, and treatment outcomes. An integrated team of healthcare providers that incorporates societies’ recommendations into clinical practice can help achieve the best possible outcomes. A multidisciplinary panel of experts in oncology, nutrition, exercise, and medicine participated in a 2-day virtual roundtable in October 2020 to discuss gaps and opportunities in oncology nutrition, alone and in combination with exercise, relative to current evidence and international societies’ recommendations. The panel recommended five principles to optimize clinical oncology practice: (1) position oncology nutrition at the center of multidisciplinary care; (2) partner with colleagues and administrators to integrate a nutrition care process into the multidisciplinary cancer care approach; (3) screen all patients for malnutrition risk at diagnosis and regularly throughout treatment; (4) combine exercise and nutrition interventions before (e.g., prehabilitation), during, and after treatment as oncology standard of care to optimize nutrition status and muscle mass; and (5) incorporate a patient-centered approach into multidisciplinary care.

Consistency and clear guidelines on dosimetry are essential for accurate and precise dosimetry, to ensure the best patient outcomes and to allow direct dose comparison across different centres. Magnetic Resonance Imaging Linac (MRI-linac) systems have recently been introduced to Australasian clinics. This report provides recommendations on reference dosimetry measurements for MRI-linacs on behalf of the Australiasian College of Physical Scientists and Engineers in Medicine (ACPSEM) MRI-linac working group. There are two configurations considered for MRI-linacs, perpendicular and parallel, referring to the relative direction of the magnetic field and radiation beam, with different impacts on dose deposition in a medium. These recommendations focus on ion chambers which are most commonly used in the clinic for reference dosimetry. Water phantoms must be MR safe or conditional and practical limitations on phantom set-up must be considered. Solid phantoms are not advised for reference dosimetry. For reference dosimetry, IAEA TRS-398 recommendations cannot be followed completely due to physical differences between conventional linac and MRI-linac systems. Manufacturers’ advice on reference conditions should be followed. Beam quality specification of TPR20,10 is recommended. The configuration of the central axis of the ion chamber relative to the magnetic field and radiation beam impacts the chamber response and must be considered carefully. Recommended corrections to delivered dose are $${k}_{{Q}_{msr}{Q}_{0}}^{{f}_{msr}{f}_{ref}}$$ k Q msr Q 0 f msr f ref , a correction for beam quality and $${k}_{\overrightarrow{B},{Q}_{msr}}^{{f}_{msr}}$$ k B → , Q msr f msr , for the impact of the magnetic field on dosimeter response in the magnetic field. Literature based values for $${k}_{\overrightarrow{B},{Q}_{msr}}^{{f}_{msr}}$$ k B → , Q msr f msr are given. It is important to note that this is a developing field and these recommendations should be used together with a review of current literature.

The purpose of this study was to investigate the impact of mLearning or mobile device practice on the attention and accuracy of student's use of math concepts, specifically, telling time. A single subject, alternating treatment design was used to compare mLearning to paper and pencil practice in four 3rd grade male students. Results were mixed; two children were observed to be more on-task during the mLearning practice, and two children were observed to perform similarly across both conditions. Additionally, two children performed similarly on correctly completed problems across both conditions, and two children performed better using paper and pencil practice. All students completed more math problems during the paper and pencil practice.

Excellent mechanical and electrical properties of graphene-based paper-like materials are essential for applications in flexible conductors, energy-storage devices, etc. The graphene oxide (GO) supernatant separated by centrifugation and ultrasonication has been used to prepare graphene oxide paper and reduced graphene oxide paper (rGOP) with high strength and conductivity. However, this method has cumbersome steps and low supernatant concentration, which greatly increases time and energy consumption, and is not suitable for rapid batch preparation of high-strength and high-thickness rGOP. Herein, a high-speed mechanical shearing method has been used to efficiently exfoliate graphite oxide suspension into high-concentration GO slurry with large lateral size, and rGOP has been further prepared by blade coating and HI acid chemical reduction. Compared with the product prepared by ultrasonic exfoliation method, the average area of GO sheets obtained via the mechanical shear exfoliation method can reach around 16.31 μm2. As a result, the mechanical properties and conductivity of the prepared rGOP have been increased by 30% and 23.5%, respectively, with the tensile strength and electrical conductivity of 478.2 MPa and 208.4 S/cm being obtained. The developed method is of great significance for the large-scale production and emerging applications of lightweight and high-performance rGOP.

Dual-purpose coated paper, which enables in-line inkjet printing with web offset, can be used for both offset and inkjet prints. This product has potential to meet the ever-increasing demand for printing individualized information on commercial printing materials. In this work, commercial samples were printed in the two presses. It was deduced that low permeability correlates with large color gamut volume. The correlation would be useful to design coating formulations for good printability. Also, we examined the packing of coating layers to identify a coating formulation that provides good printing quality in both offset and inkjet printing. Many combinations of pigments were tested, and the effects of particle shape on viscosity and packing were examined. For all coating colors, pigment mixtures with a weight ratio of 3:1 gave the highest packing density. The mixture of GCC 90 and delaminated clay with a weight ratio of 3:1 was the best selection studied for dual-purpose coated paper. Among commercial paper samples, a web offset coated paper showed the best overall performance, indicating that coating formulations with minimal blistering are suitable for dual-purpose coated paper.

Graphical abstract Enzyme-linked immunosorbent assay (ELISA) is widely used for the detection of disease biomarkers. However, it utilizes time-consuming procedures and expensive instruments, making it infeasible for point-of-care (POC) analysis especially in resource-limited settings. In this work, a multicolorimetric ELISA biosensor integrated on a paper/polymer hybrid microfluidic device was developed for rapid visual detection of disease biomarkers at point of care, without using costly equipment. This multicolormetric ELISA platform was built on multiple distinct color variants resulted from the catalytic oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) and the etching of gold nanorods (AuNRs). The vivid color changes could be easily distinguished by the naked eye, and their red mean values allowed quantitative biomarker detection, without using any sophisticated instruments. When this multicolorimetric ELISA was integrated on a paper/polymer hybrid analytical device, it not only provided integrated processing and high portability but also enabled fast assays in about 50 min due to the unique advantages of paper/polymer hybrid devices. The limit of detection of 9.1 ng/μL of the hepatitis C virus core antigen, a biomarker for hepatitis C, was achieved using this multicolorimetric ELISA platform. This multicolor ELISA analytical device provides a new versatile, user-friendly, affordable, and portable immunosensing platform with high potential for on-site detections of various viruses, proteins, and biomarkers for low-resource settings such as at home, public venues, rural areas, and developing nations. Supplementary Information The online version contains supplementary material available at 10.1007/s00216-021-03359-8.

In this study, Taguchi experimental design was used to the optimize operating parameters for the degradation of paper mill effluent using electrochemical (EC) process with two-dimensional concentric aluminum tube electrodes (CATE). For this purpose, four significant experimental factors were used in four levels pH (6–9), electrolysis time (10–40 min), voltage (6–12 V) and surface area (357–624 cm(2)). The process parameters were optimized, through performing L16 orthogonal array of Taguchi technique, for the removal of chemical oxygen demand (COD) and turbidity. The percent COD and turbidity reductions were transferred into an accurate S/N ratio for a larger value is the better (LBT) response. The study presents a unique method of finding optimum combination of process parameters to illustrate their effect on the turbidity and COD reduction. The treatment conditions for the maximum elimination of the pollutants were second level of pH (7), third level of ET (30 min), fourth level of voltage (12 V) and second level of surface area (446 cm(2)). The confirmation experiment results were within the confidence intervals (CI) indicating an acceptable agreement between predicted and observed values. Based on the p-values, the electrolysis time and voltages were found to be the most significant factors for both COD and turbidity reduction. The findings of research indicated, that the Taguchi method can be used successfully for the treatment of paper industry effluent by electrochemical technique.

Currently, most of the collected waste medium-density fiberboards (MDF) is incinerated or landfilled, as economically viable recycling methods are yet to be developed. By steam refining waste medium-density fiberboards (MDF), it is possible to hydrolyze the incorporated resins and isolate a high yield fiber fraction. Further refining of the steam treated fibers might enable the fibers to be utilized in applications such as paper packaging, facilitating a cascading use of the waste material stream. To this end, intimate knowledge of the material is needed. In this study, the steam refined fibers of two waste MDF samples containing differing amounts of softwood and hardwood underwent refining and beating. The resulting fibers were characterized regarding their morphology and paper test sheets were produced to evaluate their strength (compression-, tensile- and tear-strength). Distinct differences in response to refining between the MDF samples were apparent. For the sample with the higher hardwood share an increase in strength properties with increasing steam treatment severities could be observed and it was possible to produce test sheets with comparable compression strength to recycled pulp for industrial corrugated paperboard. For the sample with a higher share of softwood, the steam treatment severity did not show any influence on fiber morphology or paper properties, and the resulting paper strength was low in comparison to the other steam refined waste MDF sample. Graphic Abstract

The gas flow through sheet-like porous materials such as paper can show marked lateral variations due to a heterogeneous, locally varying microstructure. Hence, reliable predictions of such lateral flux variations require an appropriate consideration of local variations in the microstructure. The flow through such sheet-like materials is commonly described with Darcy’s law in which permeances are formulated in terms of microstructure properties, such as porosities, tortuosities, or hydraulic radii. This work proposes an extension of existing permeance models that directly considers the variation and the cross-dependence between local microstructure properties. The extended model is applied to local air fluxes through a paper sheet to exemplarily reveal the joint impact of local porosities and local tortuosities on the air flux. The key extension is to consider a joint distribution of porosity and tortuosity. The latter is constructed from the univariate property distributions using a copula approach and yields local tortuosities including their variation for any encountered local porosity. These values jointly enter any permeance model that qualitatively captures the dependence of the air flux on the porosity. To assess the merit of the model, variations in the air flux and in the pore space properties are independently determined from the same measured microstructure of paper. Air flux variations are provided by computational fluid dynamics simulations on multiple, nonoverlapping segments taken from the microstructure. A statistical analysis of the entire microstructure provides the distribution of local porosity, tortuosity, and thicknesses. Our model quantitatively explains that porosity-dependent variations in the tortuosity, in particular the ones associated with high-volume pathways, decisively determine air flux variations.

Background The number of citations a paper receives reflects its impact on the scientific community. We aimed to identify and explore the characteristics of the most cited papers on total anomalous pulmonary venous connection (TAPVC). Methods Web of Science Core Collection Expanded Science Citation Index (1900 to present) was searched and papers on TAPVC were reviewed. Articles were ranked by the number of citations and the 100 most cited papers were analyzed. Results The 100 most cited papers were published between 1952 and 2018 with a mean number of citations of 52 (range 26 to 148). The 1990s was the most productive decade. All articles except one were written in English. The 100 most cited articles were published in 24 journals, led by Journal of Thoracic and Cardiovascular Surgery (21 articles), followed by Annals of Thoracic Surgery (20 articles), and Circulation (16 articles). The United States of America contributed most of the 100 most cited papers (60 articles). Hospital for Sick Children, Toronto led the list of citation classics with six papers. Christopher A. Caldarone, John W. Kirklin, and P. E. F. Daubeney were the most productive authors with 3 articles each. More than half of the papers were cohort studies (51 articles). Surgery, radiology and etiology were the main topics. Thirty-one articles were funded by public foundations, and none received support from commercial companies. Conclusions The bibliometric analysis gives a historical perspective on scientific progress in the field of TAPVC and lays the foundation for future research.

This exploratory study compares how young people (ages 15–16) learn circuitry concepts and layout design principles important to electrical engineering using one of two educational circuitry toolkits: paper circuits and traditional solderless breadboards. Paper-based prototyping kits are representative of a trend that incorporates new materials and approaches to integrating arts into traditional STEM disciplines. Extending prior research on how non-traditional toolkits enhance learning of electrical engineering outcomes, including basic circuitry concepts (i.e., current flow, polarity, and connections), this study examines the material affordances and design choices of the kits that contribute to youth’s understanding of more advanced circuitry layout design principles, including space allocation, placement of electronic components, and routing. Results indicate that paper circuits better afford the learning of layout design principles for printed circuit boards (PCBs) with large effect sizes. This study illuminates how the materials of educational toolkits uniquely solicit body- and material-syntonic patterns of activity, and thus differentially engage learners’ powerful ideas around circuitry and design principles. This investigation encourages careful consideration of the material affordances of some toolkits over others for learning purposes.

This paper presents the case of an adjunct university professor to illustrate the dilemma of using artificial intelligence (AI) technology to grade student papers. The hypothetical case discusses the benefits of using a commercial AI service to grade student papers—including discretion, convenience, pedagogical merits of consistent feedback for students, and advances made in the field that yield high-quality work—all of which are achieved quickly. Arguments against using AI to grade student papers involve cost, privacy, legality, and ethics. The paper discusses career implications for faculty members in both situations and concludes with implications for researchers within the discourse on academic integrity.

We present a translation of the 1933 paper by R. F\"urth in which a profound analogy between quantum fluctuations and Brownian motion is pointed out. This paper opened in some sense the way to the stochastic methods of quantization developed almost 30 years later by Edward Nelson and others., Comment: 23 pages, 4 figures

Computer vision is one of the artificial intelligence’s most challenging fields, enabling computers to interpret, analyse and derive meaningful information from the visual world. There are various utilizations of computer vision algorithms, and most of them, from simpler to more complicated, have an object and shape recognition in common. Traditional pen and paper tests are designed in a pre-established format and consist of numerous basic shapes, which designate the important parts of the test itself. With that in mind, many computer vision applications regarding pen and paper tests arise as an opportunity. Massive courses and large schooling organizations mostly conduct their exams in paper format and assess them manually, which imposes a significant burden on the teaching staff. Any kind of automatization that will facilitate the grading process is highly desirable. Hence, an automated answer recognition system in assessment was developed to mitigate the problems above. The system uses images of scanned test pages obtained from the test scanning process and performs the necessary image manipulation steps to increase target recognition accuracy. Further, it manages to identify regions of interest containing multiple-choice questions and contours. Finally, the system verifies obtained results using the knowledge of the whereabouts of the test template regions of interest.

Background Paediatric orthopaedics is a significant and difficult for undergraduate students to master. During the COVID-19 pandemic, we used the WeChat platform to combine the advantages offered by problem-based learning (PBL), case-based learning (CBL) and paper review teaching methods to establish a new blended online teaching model and demonstrated its feasibility and effectiveness. Objective This study aims to demonstrate the feasibility and effectiveness of a new blended pedagogical method that uses the WeChat platform and combines PBL, CBL and paper review. Methods We enrolled 22 students participating in the Department of Paediatric Orthopaedics. They participated in the WeChat blended pedagogy mode. Their departmental rotation examination scores were compared with those of 23 students who participated in the traditional teaching method. Moreover, an anonymous questionnaire was used to evaluate students’ perceptions and experiences. Results The total average scores of students who participated in the WeChat blended pedagogy mode and the traditional teaching method were 47.27 and 44.52, respectively. There were no statistically significant differences between the online teaching mode and the traditional teaching method in terms of possessing professional accomplishment, gaining knowledge and promoting interpersonal skills (P = 0.07, P = 0.12 and P = 0.65, respectively). In terms of independent clinical thinking, self-improving capability and improving clinical skills, the scores associated with the WeChat blended pedagogy mode were 8.00, 8.00 and 6.00, whereas those associated with the traditional teaching method were 6.70, 6.87 and 7.48. The overall satisfaction with the WeChat blended pedagogy mode reached 100%. A total of 64%, 86%, 68%, 64% and 59% of students chose very large or large in response to the items concerning professional accomplishment, knowledge absorption, independent clinical thinking skills, English reading and literature exploring capacity, as well as interpersonal skills, respectively. Fifteen participants claimed that the WeChat blended pedagogy mode was less helpful to them with regard to promoting the improvement of their clinical skills. Nine students claimed that the WeChat blended pedagogy mode was time-consuming. Conclusions Our study verified the feasibility and effectiveness of the WeChat blended pedagogy mode for undergraduate paediatric orthopaedics internships. Trial Registration Retrospectively registered.

The study presents the integration of architectural design approaches in the fashion design process suggesting a new educational method based on structural model fabrication. The paper addresses the output of an experimental collaborative practice-based workshop titled ‘Fashion Clash’ that mixes both architects and fashion designers. The workshop focused on testing self-structural garments following a manual workflow which is divided into three main phases, (1) modeling and form-finding, (2) assembly, and (3) fabrication. Paper-based materials are used for transforming full-scale garments into textiles. The results presented seven garments displayed at a fashion show that show the effect of the folding techniques in reaching stability and highlighting the interdisciplinary integration of architects and fashion designers. The study concludes that implementing a parametric design logic based on architectural perspective in fashion would generate innovative ways of testing self-supporting geometry. Digitally computing the forces and structure before fabrication are left for further research.

In this study, we present a promising and facile approach toward the fabrication of non-toxic, water-stable, and eco-friendly luminescent fiber paper composed of polycaprolactone (PCL) polymer and CsPbBr3@SiO2 core–shell perovskite nanocrystals. PCL-perovskite fiber paper was fabricated using a conventional electrospinning process. Transmission electron microscopy (TEM) clearly revealed incorporation of CsPbBr3@SiO2 nanocrystals in the fibers, while scanning electron microscopy (SEM) demonstrated that incorporation of CsPbBr3@SiO2 nanocrystals did not affect the surface and diameter of the PCL-perovskite fibers. In addition, thermogravimetric analysis (TGA) and contact angle measurements have demonstrated that the PCL-perovskite fibers exhibit excellent thermal and water stability. The fabricated PCL-perovskite fiber paper exhibited a bright green emission centered at 520 nm upon excitation by ultra-violet (UV) light (374 nm). We have demonstrated that fluorescent PCL-perovskite fiber paper is a promising candidate for anti-counterfeiting applications because various patterns can be printed on the paper, which only become visible after exposure to UV light at 365 nm. Cell proliferation tests revealed that the PCL-perovskite fibers are cytocompatibility. Consequently, they may be suitable for biocompatible anti-counterfeiting. The present study reveals that PCL-perovskite fibers may pave way toward next generation biomedical probe and anti-counterfeiting applications. Graphical Abstract

In this work, the efficiency of a polyelectrolyte complex (PEC) to retain different cellulose micro/nanofibers (CMNFs) during paper formation and to improve the physical properties of recycled unbleached fiber paper was analyzed. CMNFs were obtained from a commercial bleached eucalyptus pulp (BEP) using a PFI refiner followed by a chemical treatment with oxalic acid at two different concentrations. Finally, the pulp was fibrillated using a high-pressure homogenizer at three different intensities. The PEC was formed by addition of the xylan (Xyl) solution on chitosan (CH) solution with a Xyl/CH mass ratio of 80/20. The required dosages of PEC solution to neutralize the charges of different nanocellulose fractions were determined by ζ-potential measurements, and the CMNF retentions on recycled unbleached fibers were evaluated in a Britt Dynamic Drainage Jar. The results showed that the maximum retention was obtained when the neutral PEC-CMNF system was added to pulp. Besides, a significant decrease on °SR was observed when PEC and PEC-CMNF systems were added to the untreated pulp, limiting the negative effects of nanocellulose addition on pulp drainability. The incorporation of PEC-CMNF systems to the handsheets increased the tensile index (up to 28%), Mullen index (up to 40%) and internal bonding (up to 255%). Finally, the compressive strength of the handsheets, namely SCT and CMT, increased up to 30 and 70%, respectively. These simultaneous improvement on drainability and mechanical properties makes the proposed PEC-CMNF system a promising solution for the production of packaging paper.

Organic sticky contaminants represent one of the biggest technical challenges in the paper recycling process. These contaminants reduce paper strength, cause plugging of wires and felts, and stick to or deposit on machine parts affecting the runnability of the paper machine. The removal of these sticky contaminants is difficult to achieve along the process due to the heterogeneous nature of these organic contaminants. In this study, the nature of sticky contaminants in multiple wastepaper grades was analyzed and characterized using screening, solvent extraction with subsequent analysis such as FT-IR, GC-MS, and SEM. The content of stickies in wastepaper varies among different paper grades and their recovery methods. The majority of wastepaper grades collected from a recycled paper mill contains 3–5 wt% stickies, while a sample from a curb side collection from a residential area contains about 15 wt% stickies. Polyvinyl acetate (PVA) polymers, styrene butadiene rubber (SBR), paraffin waxes and polyamines are the major components in the extracted sticky contaminants. In addition, these stickies deposit heavily on fibers surface leading to high negative charge in fibers suspension ranging between 2 ~ 4.5 µeq/L. It is expected that these findings will assist addressing the knowledge gaps in understanding the nature of stickies and their behaviors, and to eventually develop highly efficient technologies for contamination removal in the paper recycling process.