Paper-based laser-induced graphene for sustainable and flexible microsupercapacitor applications

Funding Information: Open access funding provided by FCT|FCCN (b-on). This work was financed by national funds from Fundação para a Ciência e a Tecnologia (FCT), I.P., in the scope of the projects LA/P/0037/2020, UIDP/50025/2020, and UIDB/50025/2020 of the Associate Laboratory Institute of Nanostructures, Nanomodelling and Nanofabrication–i3N and by FEDER funds through the COMPETE 2020 Program and National Funds through Portuguese Foundation for Science and Technology under projects POCI-01–0145-FEDER-007688, UID/CTM/50025 and by ERC AdG grant from the project DIGISMART (ERC-AdG-2017, GA 787410). J.C. would like to acknowledge FCT/MCTES for his present research contract with reference CEECIND/00880/2018. R.C. acknowledges funding from i3N-FCT I.P. through the PhD Grant UI/BD/151295/2021. S. S. and T. P. also acknowledge the funding from National Foundation for Science and Technology, through the PhD Grants SFRH/BD/149751/2019 and 2020.08606.BD, respectively. Publisher Copyright: © 2022, The Author(s). Laser-induced graphene (LIG) is as a promising material for flexible microsupercapacitors (MSCs) due to its simple and cost-effective processing. However, LIG-MSC research and production has been centered on non-sustainable polymeric substrates, such as polyimide. In this work, it is presented a cost-effective, reproducible, and robust approach for the preparation of LIG structures via a one-step laser direct writing on chromatography paper. The developed strategy relies on soaking the paper in a 0.1 M sodium tetraborate solution (borax) prior to the laser processing. Borax acts as a fire-retardant agent, thus allowing the laser processing of sensitive substrates that other way would be easily destroyed under the high-energy beam. LIG on paper exhibiting low sheet resistance (30 Ω sq−1) and improved electrode/electrolyte interface was obtained by the proposed method. When used as microsupercapacitor electrodes, this laser-induced graphene resulted in specific capacitances of 4.6 mF cm−2 (0.015 mA cm−2). Furthermore, the devices exhibit excellent cycling stability (> 10,000 cycles at 0.5 mA cm−2) and good mechanical properties. By connecting the devices in series and parallel, it was also possible to control the voltage and energy delivered by the system. Thus, paper-based LIG-MSC can be used as energy storage devices for flexible, low-cost, and portable electronics. Additionally, due to their flexible design and architecture, they can be easily adapted to other circuits and applications with different power requirements. Graphical Abstract: [Figure not available: see fulltext.] publishersversion published