Search

Cellulosic fibre composites from agriculture waste product bast fibre such Empty Fruit Bunch (EFB) oil palm has lower cost than normal softwood fibre and they are great alternative to be considered in insulation papermaking. For this purpose, EFB fibre, kenaf fibre and their blend were used to fabricate electrical presspaper samples through a laboratory papermaking process. The study of physical, mechanical and electrical properties such as cellulosic structure, tensile strength, AC voltage breakdown and lightning impulse breakdown strength were conducted according to the standard testing method of insulation IEC60243-1:2013. From this research, the physical structure, mechanical and electrical behaviour of mixed EFB and kenaf fibre insulation paper are comparable to Kraft paper and qualified the basic criterion to be an electrical insulation paper as required by IEC60641-2 standard. The purposes of this insulation paper produced is to be use in electrical transformers, therefore the same test should be repeated to the insulation paper that have undergone aging process at normal and accelerated operating temperatures.

An emerging alternative to conventional Augmented Reality (AR) glasses designs, Beaming displays promise slim AR glasses free from challenging design trade-offs, including battery-related limits or computational budget-related issues. These beaming displays remove active components such as batteries and electronics from AR glasses and move them to a projector that projects images to a user from a distance (1-2 meters), where users wear only passive optical eyepieces. However, earlier implementations of these displays delivered poor resolutions (7 cycles per degree) without any optical focus cues and were introduced with a bulky form-factor eyepiece (50 mm thick). This paper introduces a new milestone for beaming displays, which we call HoloBeam. In this new design, a custom holographic projector populates a micro-volume located at some distance (1-2 meters) with multiple planes of images. Users view magnified copies of these images from this small volume with the help of an eyepiece that is either a Holographic Optical Element (HOE) or a set of lenses. Our HoloBeam prototypes demonstrate the thinnest AR glasses to date with a submillimeter thickness (e.g., HOE film is only 120 um thick). In addition, HoloBeam prototypes demonstrate near retinal resolutions (24 cycles per degree) with a 70 degrees-wide field of view., Comment: 15 pages, 18 Figures, 1 Table, 1 Listing

The power transformer is one of the most important equipments that has a critical role in good electrical power delivery. Ageing of paper insulation inside the transformer is irreversible and hugely related to the operation of power transformer. This study involved inspection data from in-service and out-of-service 150 kV power transformers provided by the Indonesian electric company. The degree of polymerization (DP) of the cellulose paper insulation and furanic compound in the insulating oil can be used to estimate the transformer's lifetime. In this study, the correlation between HI decreasing rate (HI dec_rate ) and the loading factor of 115 transformers historical data was observed. The DP of the transformer paper was predicted (DP pred ) using the ANFIS model using the dielectric characteristics and dissolved gases as input. The results show that the correlation between the DP pred decreasing rate (DP dec_rate ) and the loading factor is more significant than that between the HI dec_rate and the loading factor

Mineral oil has long been used as an insulating liquid in transformers. Natural ester-based oil is an alternative due to its non-toxic and biodegradable characteristics. Then this study compared the rate of degradation of accelerated thermal aging paper impregnated in natural ester oil (NE) with mineral oil (MO) and Gas-to-Liquid (GTL). Sealed glass bottles containing thermally upgraded kraft paper (TUK), kraft paper (KP), pressboard (PB), and oil in an atmospheric environment were aged in an oven at 150 °C within 1344 hours. Observations were made at intervals of 336 hours during the aging. The rate of degradation of the paper was observed through the Degree of Polymerization (DP) test of kraft paper, while the chemical structure of the paper was observed through the Fourier Transform Infrared (FTIR) test of the paper. In addition, acid and moisture tests were also carried out to observe the oil-paper interaction during aging. The depolymerization rate of paper in natural ester oil is smaller compared to other oils. This indicates that NE has better thermal stability and can extend life of the transformer paper. The paper aging rate in MO is similar to GTL Oil because they both are hydrocarbons-based.

The Taguchi method was used to optimize the stack structure of electronic paper displays. The falling ball experiment was performed to analyze the effect of various combinations of cover lenses, optically clear adhesives, and substrates on the impact strength of the module surfaces. The results revealed that the stack structure considerably improved the surface impact resistance. The combination of a glass substrate electronic paper display and a plastic cover lens achieved the highest surface impact resistance.

The current study revolves around development of paper from dhaincha fiber (Sesbania aculeata). Dhaincha is a basically cultivated for improvisation of soil quality. Due to deforestation worldwide, various sources of raw materials are used in paper industries. Indian pulp and paper industry is the world's major paper industry. In this study extraction of dhaincha fiber was done followed by retting, combing, chemical analysis and by making of pulp with dhaincha fiber. The dhaincha pulp was then used for making a paper from dhaincha fiber. The thickness of the dhaincha paper was then tested with paper thickness tester. By doing further processing dhaincha paper can be used commercially by paper industry.

The NIST selection process for standardizing Post-Quantum Cryptography Mechanisms is currently running. Many papers already studied their theoretical security, but the resistance in deployed device has not been much investigated so far. In particular, fault attack is a serious threat for algorithms implemented in embedded devices. One particularly powerful technique is to use safe-error attacks. Such attacks exploit the fact that a specific fault may or may not lead to a faulty output depending on a secret value. In this paper, we investigate the resistance of various Post-Quantum candidates algorithms against such attacks.

Most insulation in the power transformers consists of oil and cellulose (paper/pressboard). Mineral oil has been used as an insulating liquid for over a hundred years. However, mineral oil is a non-biodegradable oil and has a serious impact on the environment and the non- renewable energy resources. Therefore, it is important to replace this oil with another alternative insulating liquid, and PFAE was introduced in the year 2006 in Japan. In addition, the ability of an insulating system also depends on the thickness of the monomolecular cellulose fiber on the kraft paper. Hence, it is necessary to determine the appropriate thickness of kraft paper for use as an insulator on the power transformer for this type of oil. This project presents paper-oil (PFAE) charging and discharging current characteristics. The study was carried out through the implementation of experiments in the laboratory. Polarization and Depolarization Current (PDC) test has been carried out to test the conductivity and response function of the insulating materials. It was found that the thickness of kraft paper affecting the capacitance value and the PDC measurement of the tested model. In both dry and wet conditions, the sample of two layers of kraft insulation paper shows the best insulation status as it has the lowest conductivity compared to the other samples. It can be concluded that it is necessary to determine the ideal thickness of insulating paper to ensure that the power transformer has the best insulation.

In this work, Schottky diodes based on amorphous indium-gallium-zinc-oxide (IGZO) were fabricated on cellulose microfiber paper substrate. Silver lines used as the Schottky barrier were printed, in parallel to thermally evaporated Cr/Au ohmic contact, using a dispense printer. The morphological and electrical characteristics of the devices are presented. The fabricated diodes exhibited rectification ratios ranging from 3.4 to 34.9 at ±1V with ON voltages that range from 1.1V to 1.4 V, for device lengths (Ag to Au distance) from 145 µm to 894 µm. The diodes were characterized in a temperature range between 25°C and 80°C. They showed a decrease of the ON current when increasing temperature, which is mainly attributed to the change of the cellulose microstructure. Indeed, an opposite of the ON current behavior was registered when the diode was realized on a polyimide substrate. The realized flexible paper-based diodes offer a potential promising choice for printed environmental-friendly electronics.

The single-mode bosonic channel is addressed with classical interference in the modulation and with side information at the transmitter. This model can viewed as the quantum counterpart of the classical random-parameter Gaussian channel. Based on Costa's writing-on-dirty-paper result (1983), the effect of the channel parameter can be canceled even when the decoder has no side information, and regardless of the input power constraint. For both homodyne and heterodyne detection with a coherent-state protocol, the model reduces to a classical channel with either real or complex-valued Gaussian noise. Thereby, by applying Costa's dirty paper coding strategy, we observe that the effect of the classical interference can be canceled for those channels as well. Then, we consider the bosonic channel with joint detection, for which the classical results do not apply, and derive a dirty-paper coding lower bound. Furthermore, considering the special case of a pure-loss bosonic channel, we demonstrate that the optimal coefficient for dirty paper coding is not necessarily the MMSE estimator coefficient as in the classical setting.

The industry of disposables has undergone a huge revolution in this century owing to the busy lifestyles and technological advancements in its production and manufacturing process. Paper cups are one of the widely used products in disposable industry. It has multi utility options that is it can be used to drink water as well as beverages, soups, liquids etc. This paper entirely focuses on increasing the quality factor of production and manufacturing process of these paper cups by adding additional circuitry to the existing machinery to reduce waste of raw materials as well as the per unit cost involved in wastage of electricity. This research work is based on using proximity sensors to sense the materials and molded paper cups infront of machinery and reduce the electric wastage through a relay Mechanism assembly. This is a PLC based live project example of effectively increasing the overall efficiency of the manufacturing plant

Cortisol levels in saliva is an important biomarker of stress and its rapid detection is a significant need for overall management of health and wellness. Herein, we demonstrate two novel SERS-based approaches for the detection of cortisol directly in saliva using regular and novel hexagonal gold nanoparticles (AuNPs) on a paper substrate. Using the direct SERS method, we first show the detection of cortisol by mixing the cortisol solution with highly concentrated AuNPs on a Parchment paper surface as an active SERS substrate. We also propose an alternate lateral flow SERS (LFS) approach, which employs paper as a chromatographic channel to reduce interference from background saliva matrix for the detection using SERS. A rapid detection of spiked cortisol in saliva down to 100 µg/ml concentration by employing the ‘lateral flow SERS’ (LFS) platform is shown. Results indicate a promising route for point-of-care detection of stress biomarkers.

For the detection of product color uniformity and seam texture defects in the production process of test paper, detection methods are proposed respectively. For the detection of the color uniformity, a uniformity detection method based on dynamic light correction is proposed. The illumination correction image is used for color dynamic compensation of the test paper image to solve the influence of uneven illumination on the test paper. For the detection of texture defects such as seams, a texture defect detection method based on gray gradient aggregation intensity is proposed. This method uses one-way Gaussian convolution to strengthen features, and then calculates the gradient, divides the region and calculates the gradient extremum aggregation strength to judge texture defects, which can quickly and efficiently find seam defects. The experimental results show that the above methods have obvious effects on the color uniformity and seam detection of the test paper. The color uniformity accuracy rate is 96%, the seam detection accuracy rate is 97%. The total detection time of a single test paper is about 90ms. The algorithm is real-time and accurate, and can be used in actual production detection.

Ultraviolet (UV) irradiation was used as a tool Kraft paper. Using measurements of the DP as a function of irradiation time, a theoretical model was used to predict the local value of DP in the surface layer of the paper. After characterization of their mechanical properties, selected samples were exposed to oil flows mimicking ONAN, OFAF and reclamation conditions. The presence of a surface layer of low D Pled to significant surface roughening under high rates of oil flow,but no significant erosion. The findings indicate that the DP value at the surface is more critical than the average (or measured) D Pin determining the extent of oil flow related damage.

Life expectancy of power transformers is limited by the integrity of insulating cellulosic paper wound around transformer winding. The insulating paper is subjected to thermal, electrical and mechanical stresses. There are three main factors causing degradation in the paper, i.e. moisture, oxygen and temperature. In this work, the degradation rate due to temperature is only discussed. That means that transformer life could be shortened or extended by adjusting loads which results in higher or lower temperature conditions. The temperature, namely the hot-spot temperature is typically used to estimate the relative ageing rate and loss of insulation life. Being able to estimate the hot-spot temperature accurately given load and weather data helps operators to plan about transformer replacement properly. This could also reduce costs of early replacement due to a conservative estimation. In this work, thermal models have been developed using machine learning techniques to learn thermal behavior from historical data. The data are comprised of the hot-spot temperature estimated by winding temperature indicator (WTI), load profiles, ambient temperature, rainfall, wind speed and direction and solar radiation. The proposed method has been validated using data for five 400kV/275kV, four 400kV/132kV and two 275kV/66kV autotransformers and has been shown to work effectively.

Here, we report a preliminary analysis on the manufacturing and testing of a low-cost and eco-friendly paper-based gas sensors realized with Aerosol Jet Printing (AJP) and Flash Lamp Annealing (FLA). The hygroscopic properties of paper make it possible to detect the presence of water-soluble gases in an environment provided with a relative humidity (RH) above a given threshold $(\text{RH} > 75\%)$ . This aspect allows the usage of such technology in the realization of a future food smart packaging detecting the presence of a malevolent gas like ammonia in food. Carbon interdigitated electrodes were printed and sintered on chromatographic paper, obtaining a mean resistance value of to $(231\pm 20)\ \mathrm{k} \Omega$ and $(249\pm 28)\ \mathrm{k} \Omega$ for the left and the right electrode respectively. The sensors were tested at different relative humidity (RH) values (75, 80, 90, 100%), and once stabilized they were tested with different ammonia concentrations (3, 6, 9 and 12 ppm). A proportional decrease was evidenced in increasing RH and ammonia concentration. Considering the baseline at a constant value of $\text{RH} =75\%$ , the sensors showed a resistance decrease of 15% in presence of the lowest concentration of 3 ppm.

The life duration of cellulosic insulation is an essential aspect in the design of power transformer. Mineral oils have been largely used as liquid dielectrics to extend the service life of transformers. However the environmental and health aspects led to the seeking of alternative liquid dielectrics. Many authors have claimed that the use of bio-based liquids, especially natural esters can slow down the aging process of dielectric paper. The use of natural esters can therefore extend the actual operating life of transformers. Many vegetable oils have been elaborated. In this paper, we focus on palm kernel and castor oils, two non-edible vegetable oils largely present in Central Africa. We show the results of a study of thermal aging of dielectric paper immersed in palm kernel and castor oils. We start by presenting the elaboration and performance analysis processes of methyl esters of palm kernel and castor oils. Next, we develop the aging procedure; the paper was aged at 110°C during 100 hours, samples of oils and insulating paper were taken for analyses. The various tests performed included the determination of the total acid number, the UV-visible spectroscopy and the physical changes of the insulating paper. The results obtained with natural esters are compared to those obtained with mineral oil, which was used as a benchmark. The results obtained with palm kernel and castor oils confirms the excellent dielectric and cooling properties observed with other natural esters.

In the screening area of the paper mill has the high density impurities which are removed from the pulp and it is stored in the machine chest. The pulp in the machine chest is directly transferred to the head box without removing any medium density sand particles which affects the quality of the pulp. Only if the pulp entering the paper machine is clean and well-mixed with additives a good quality of paper will be produced. So in between the pulp tank and the pulp receiver a medium density cleaner is installed. The pulp in the machine chest is allowed to flow through the round hopper. Due to the circulatory motion and by centrifugal force the high density sand particles will settle in the bottom of the hopper. Due to the centripetal force the pulp is recovered from the hopper. The sand particles that settled in the bottom of the hopper are removed by the periodic opening and closing of the solenoid valves at regular interval of time. The medium density impurities are removed by creating hydro cyclone. These sequential operations are automated and controlled through PLC. So the overall plant efficiency is increased. Since the medium density impurities are removed this ensures the good quality paper production.

Electromagnetic Fault Injection (EMFI) is a well known method of introducing faults for security analysis of digital devices. Such faults can be seen as analogous to the faults which are known to naturally occur in digital devices, a known problem with designing safety-critical systems.Numerous standards have been developed for safety-critical systems, including the development of standards for increasing the rate of naturally occurring faults using particle sources. In this work, we demonstrate that desktop EMFI tooling can be used to accomplish similar testing, but with more control, effectively speeding up the evaluation process.We demonstrate using EMFI tooling for safety evaluation to recreate a highly publicized safety issue present in an automotive ECU – one that could not easily be recreated with other techniques.

In a modern society, seniors want to be a part of the digital world and the research in progress seeks to present whether through Serious Games can help their learning process and understanding of cybersecurity when online browsing, namely, deciding which actions to make when facing an eminent threat. this position paper aims to presents a new research on how Serious Games can help seniors to become more aware in the cybersecurity theme and how to be more careful when search the web. In this research the methodology apply is the Action Research, by identifying the problem –lack of knowledge that seniors have on the online threats and promoting an action –the Serious Game played to teach and motivate the senior to become safer online.

In order to ensure the withstand capability of the high voltage apparatus against high- frequency transients, multiple chopped impulse test is usually defined. Such tests serve as a basis of replicating in-field phenomena produced by the operation of switching devices located in the vicinity of the apparatus. However, the testing procedure methodology proposed within the IEC/IEEE standards may not simulate the severity of actual effects in an adequate way. This work presents a novel approach in simulating such transient voltage stresses in the laboratory and gives insight on improving the standard testing procedures. Simplified insulation models are tested using the presented approach and standard diagnostic measurements are done on the models to investigate the insulation behavior during testing. The results show that mentioned high voltage transients’ effect on insulation, occurring during the disconnector pre-strikes or re-strikes, can be provoked by the given testing approach.

Oil-paper insulation is the key insulation structure of the transformers, whose aging condition is closely related to the operations of the equipment. The degree of polymerization (DP) is the direct parameter characterizing the aging condition of oil-paper insulation. Recently, the near infrared spectroscopy (NIRS) measurement powered by quantitative analysis is used to evaluate DP of the insulating papers mainly. While the applications of NIRS for DP evaluation is constrained because the present spectral quantitative analysis method is not accurate and stable enough, especially for onsite tests. In this paper, we propose a Gaussian process regression (GPR) method to predict DP of the oil- paper insulation in laboratory as well as in field. Firstly, the basic principles of GPR algorithm are illustrated. A GPR model for DP prediction is established based on the spectra of differently aged insulating paper samples which are prepared in laboratory. The GPR model show a high prediction accuracy both for training set and testing set. The established GPR model is finally applied on the DP prediction of insulating papers originating from a de-tanked transformer. The accurate predicted DP and the reliable aging assessment results indicate that the established model can be implemented on site.

Oil-paper insulation is an important component of the oil-immersed power transformer, and its insulation life is directly related to the operating life of the transformer. Therefore, it is particularly important to accurately assess the life of the oil-paper insulation system. In this paper, aging insulation paper samples with different mechanical stresses were prepared in an aging vibration chamber under laboratory conditions, and the activation energy under the synergistic machine-thermal action was obtained using the translation factor. The Arrhenius equation was then combined with the Ekenstam equation to derive an equation that can accurately determine the degree of polymerization of the oil-paper insulation system. It is proved that this equation can predict the degree of polymerization of the paper under the synergistic action of machine and heat, and can provide theoretical support for the evaluation of paper life.

Although testing software is paramount to safeguard our digitizing society, students are reluctant to consider a career in the field. A reason could be that dedicated courses on software testing are rare. However, even when such a course exists, students perceive testing as a boring, unrewarding and even dogmatic chore. For more than 10 years, we have been teaching a software testing course at the Vrije Universiteit in Amsterdam. Driven by our belief that an abundant exposure to software bugs makes good testers, we experimented with many ideas to engage students and make them love the topic. The most unorthodox, yet effective interventions we are proud of, were: (1) to scare students by analyzing past, software-related accidents, such as Therac-25 or Boeing 737-MAX; (2) to thrill them using bug-hunting gamification, enabled by the in-house developed VU-BugZoo; (3) to trust them an end-To-end testing of safety-critical software-intensive systems, such as model trains, automatic insulin pumps and even radiotherapy facilities, and (4) to inspire their career, by opening a dialog with test professionals from industry. The result is a mature course, read yearly by 50 computer science graduates, where almost 80% of the participants find the topic interesting and challenging, and 40% consider a future carrier in testing. These positive results make us confident that we found a formula that works. In this position paper, we would like to share our innovative ideas and lessons learned. Also in the future, we will stay committed to educate enthusiastic and responsible software testers.