Search

A recent study conducted at Islamia University Bahawalpur in Pakistan focused on the development of photocatalysts for removing organic pollutants from wastewater. The researchers synthesized a nanocomposite of In-Ce2(MoO4)3 with graphitic carbon nitride and found that it effectively degraded Rhodamine B dye and diclofenac sodium salt in industrial wastewater. The study concluded that the newly developed photocatalyst showed promising results in eliminating pollutants from industrial wastewater, contributing to environmental sustainability. For more information, readers can refer to the article "Synergistic Role of Indium Doping and G-c3n4 Reinforcement In Boosting the Visible Light-triggered Rhodamine B and Diclofenac Sodium Salt Degradation Over Rare Earth Molybdate" published in Surfaces and Interfaces. [Extracted from the article]

Researchers at the First Affiliated Hospital of Sun Yat-sen University in China have developed a new method for creating injectable hydrogels using natural DNA matrices and halloysite nanotubes to promote bone regeneration. The study aims to address the clinical challenges of low osteogenic activity in current injectable hydrogels by enhancing their handling properties and osteoinductive stimulation. This research highlights the potential of nanocomposite hydrogels in repairing non-load bearing bone defects and improving osteoinductivity, offering insights into optimizing hydrogel properties for tissue formation and cell differentiation. [Extracted from the article]

A recent study conducted at the University of El Oued in Algeria focused on the synthesis of alpha-Fe2O3/Fe3O4 nanocomposites coated with polyethylene glycol for enhanced antioxidant and photocatalytic properties. The research demonstrated the effectiveness of these nanocomposites in degrading Brilliant Cresyl Blue dye and highlighted their potential for environmental remediation and antioxidant therapies. The study emphasized the uniform particle formation and controlled crystallinity achieved through hydrothermal synthesis, showcasing the promising applications of these nanocomposites in water treatment and other fields. [Extracted from the article]

Researchers from the Research Institute on Terrestrial Ecosystems in Naples, Italy, have published a study on smart nanocomposite hydrogels for therapeutic and diagnostic applications in tissue engineering. These hybrid materials can respond to various stimuli, such as temperature, pH, light, and enzymatic activity, allowing for precise control over drug release, tissue regeneration, and biosensing. The study highlights the potential of these platforms for personalized medicine and emphasizes the need for further research to address medical needs. For more information, the full article can be accessed for free at the publisher's website. [Extracted from the article]

A recent study from the Universidad Autonoma de Baja California explores the integration of an antimicrobial nanocomposite into bioactive electrospun fibers to create advanced wound dressing materials. The nanocomposite, consisting of chitosan, silver nanocrystals, and graphene oxide, showed enhanced mechanical strength and effective antimicrobial activity against common bacterial pathogens. The research suggests that these materials could be a cost-effective solution for managing chronic and burn-related wounds, particularly in areas with high rates of burn injuries. Further clinical investigations are recommended to fully explore the potential and applicability of these innovative fibers. [Extracted from the article]

Researchers at Islamic Azad University in Varamin, Iran, have developed a novel pH-sensitive nanocarrier by grafting chitosan/polyvinylpyrrolidone onto single-walled carbon nanotubes for drug delivery, specifically levofloxacin. The nanocomposite was characterized using various techniques, and in-vitro drug release tests showed sustained release over 36 hours. The antimicrobial efficacy of the nanomaterials against Staphylococcus aureus was also evaluated. This research has been peer-reviewed and provides valuable insights into nanotechnology and drug delivery systems. [Extracted from the article]

Researchers from Qassim University in Buraydah, Saudi Arabia, have developed a novel nanosorbent called Zr-TiO2@g-C3N4 (ZTCN) to remove the antibiotic ciprofloxacin from contaminated water. The nanosorbent was found to have a maximum adsorption capacity of 157.3 mg/g for ciprofloxacin, making it efficient in removing the antibiotic from water. The study concluded that ZTCN could be highly relevant for treating industrial wastewater, showcasing the potential applications of this new nanotechnology. [Extracted from the article]

Researchers from Xi'an Jiaotong University conducted a study on the anticancer properties of zinc-tin oxide/dextran/geraniol nanocomposites (ZSD-Ger-NCs) against colon cancer in rats. The ZSD-Ger-NCs inhibited growth and promoted apoptosis in cancer cells, as well as reduced tumor volume in rats. The study concluded that ZSD-Ger-NCs could be a promising candidate for treating colon cancer. [Extracted from the article]

Researchers at Xi'an Jiaotong University in China have developed a new type of supramolecular nanocomposite hydrogel dressing with antibacterial and antioxidant properties for treating multidrug-resistant bacterial infections in skin wounds. The dressing, made from a combination of poly(glycerol sebacate)-co-poly(ethylene glycol)-g-catechol and mesoporous copper sulfide nanoparticles, showed promising results in promoting wound repair by enhancing collagen deposition, reducing inflammation, and stimulating new blood vessel formation. This innovative dressing has potential applications in the treatment of infected skin wounds and represents a significant advancement in wound care technology. [Extracted from the article]

Researchers from National Taipei University of Technology have developed a new electrochemical sensor for detecting promethazine hydrochloride, a first-generation antihistamine used in various medical treatments. The sensor, made of CdTe anchored on CeO2, showed high sensitivity, low detection limit, and wide linear range for detecting promethazine. This research, supported by the National Science and Technology Council of Zambia, offers a potential alternative for assessing promethazine in biological and environmental samples. [Extracted from the article]

A study conducted at Mirpur University of Science and Technology in Pakistan focused on the synthesis of graphene-based nanocomposites for efficient removal of doxycycline and antimicrobial applications. The research involved the preparation of graphene nanosheets on a large scale, which were then decorated with niobium oxide and silver nanoparticles to create nanocomposites. The study found that the Nb2O5@G nanocomposite exhibited a high efficiency of 98.5% in degrading doxycycline under visible light conditions and showed potential for antibacterial applications. The research highlights the potential of graphene-based nanocomposites for waste treatment and environmental bioremediation. [Extracted from the article]

A study conducted at the Chennai Institute of Technology in India introduced a novel hybrid nanomaterial called GaN-PEDOT-PTh, which showed enhanced photocatalytic performance. The material demonstrated rapid degradation of methyl blue and effective suppression of electron-hole recombination, leading to improved overall photocatalytic activity. The research also highlighted the material's ability to detect the OFZ drug within a specific concentration range, showcasing its potential as an electrocatalyst. The study was supported by King Saud University and the Center for Computational Modeling. [Extracted from the article]

Researchers at Sacred Heart College in Tamil Nadu, India, have developed plant-mediated metal oxide nanocomposites for combating drug-resistant pathogens. The nanoparticles showed promising antibacterial and antifungal properties, making them suitable for applications in food industries. The study, supported by King Faisal University in Saudi Arabia, concluded that these green-synthesized nanocomposites are effective for antibacterial purposes. The research has been peer-reviewed and can be accessed through Waste and Biomass Valorization. [Extracted from the article]

Researchers at Yangzhou University in Jiangsu, China, have conducted a study on the preparation of a polyaniline/graphene/polypropylene nanocomposite with novel antibacterial properties. The nanocomposite, EP-nSiO2-PANI/GNP, demonstrated enhanced thermal stability and dispersibility, leading to improved antibacterial activity against Escherichia coli and Staphylococcus aureus. This research, funded by various sources including the Yangzhou Science and Technology Plan Project, highlights the potential of nanotechnology in developing antibacterial additives for applications in food packaging and medical supplies. [Extracted from the article]

Researchers from Islamic Azad University in Najafabad, Iran, have conducted a study on incorporating Azithromycin into akermanite-monticellite nanocomposite scaffolds for bone tissue engineering. The research focused on the mechanical and biological properties, antibacterial activity, and drug release characteristics of these scaffolds. The findings indicated that the Azithromycin-loaded MON-AKT composite scaffolds showed promising antibacterial efficacy, making them a potential option for treating bone tissue defects. This research has been peer-reviewed and provides valuable insights into the field of tissue engineering. [Extracted from the article]

Researchers at Amirkabir University of Technology in Tehran, Iran, have developed a new nanocomposite scaffold for bone tissue engineering. The scaffold, made of gelatin, hydroxyapatite, halloysite nanotubes, and alendronate sodium, showed efficient drug release, optimal swelling rates, and enhanced bioactivity. The study concluded that the GEL/HA/1% HNT/AL scaffold holds promise for bone cell differentiation and repair, making it a valuable platform for bone tissue engineering. The research has been peer-reviewed and published in Materials Chemistry and Physics. [Extracted from the article]

A study conducted at Chengdu University of Information and Technology in Sichuan, People's Republic of China, focused on the degradation of the antibiotic moxifloxacin using a nanocomposite catalyst. The research highlighted the potential application of peroxymonosulfate (PMS) for efficient degradation of antibiotics in wastewater. The study found that the Co/Mn doped-carbon nanotube catalyst (CoMn@CNT) could achieve a degradation efficiency of 89.7% in 30 minutes, with low concentrations of PMS and CoMn@CNT. The research concluded that this new system could offer insights for wastewater treatment of antibiotics. [Extracted from the article]

A study conducted at Thiagarajar College in Tamil Nadu, India, focused on the fabrication of a nanocomposite material containing iron manganese oxide and reduced graphene oxide for the electrochemical detection of metronidazole. The research demonstrated the effectiveness of the nanocomposite in detecting the antibiotic drug with high sensitivity, reproducibility, and stability. The study concluded that the fabricated nanocomposite could be used for the accurate determination of antibiotic drugs in real sample analysis, showing promise for environmental applications. The research was supported by various institutions and has been peer-reviewed, providing valuable insights into the field of nanotechnology and electrochemical sensing. [Extracted from the article]

A study conducted at Cairo University evaluated the efficiency of traditional chitosan, nano chitosan, and chitosan nanocomposites for strengthening aged papyrus paper, commonly used in museums and archives. The research aimed to assess the resistance of these materials to deterioration factors and their antimicrobial activity against pathogenic bacteria. The results showed that chitosan nanocomposites enhanced the papyrus's tensile properties and prevented biodeterioration effects, with zinc oxide nanoparticles improving optical properties and chemical reactions. This peer-reviewed research provides valuable insights into eco-friendly methods for preserving cultural artifacts. [Extracted from the article]

A recent study from Mardin Artuklu University focused on the development of a nanocomposite for drug delivery applications, specifically targeting cancer treatment. The research highlighted the potential of a magnetic nanocomposite loaded with the anticancer drug morin hydrate to reduce systemic toxicity and side effects associated with current treatments. The study demonstrated promising results in terms of drug release behavior and cytotoxic effects on cancer cell lines, suggesting the potential of this nanocomposite as an effective drug carrier. For more information, readers can access the full article in Frontiers in Chemistry. [Extracted from the article]

Researchers at Princess Nourah Bint Abdulrahman University in Riyadh, Saudi Arabia, conducted a study on the effectiveness of novel nanocomposite shielding materials in reducing out-of-field radiation doses during radiation therapy. The study utilized Geant4 Monte Carlo simulations with an anthropomorphic female phantom and focused on two radiation modalities: 6 MV beams with and without flattening filters. The research concluded that these nanocomposite materials could significantly lower radiation exposure to non-target tissues, potentially enhancing patient safety during external radiation therapy. [Extracted from the article]

Researchers at Silpakorn University in Thailand have developed a novel delivery system for retinaldehyde (RAL) using flexible liposomes infused with alpha-tocopherol succinate (a-TS) to enhance skin permeability. The liposomes were embedded in pressure-sensitive adhesive (PSA) hydrogels, which showed improved stability, skin permeation, and adhesion capabilities. The study concluded that the developed hydrogels could serve as an effective platform for delivering RAL in treating skin conditions. The research was funded by Silpakorn University Under The Postdoctoral Fellowship Program and can be accessed in the journal Polymers. [Extracted from the article]

Researchers at Dali University in China have conducted a study on nanocomposites for the photocatalytic degradation of tetracycline antibiotics. The research focused on the use of CoFe[2]O[4]/WO[3] nanocomposites to enhance the eradication of waterborne pollutants. Results showed that a composite with a mass ratio of 5% exhibited the best degradation performance, achieving a 77% degradation efficiency in 20 minutes under solar light. The study concluded that the presence of CoFe[2]O[4] significantly improved the eradication of pollutants when combined with WO[3]. [Extracted from the article]

Researchers at the University of Stavanger in Norway have developed a recyclable nanocomposite scale inhibitor using superparamagnetic nanoparticles coated with a trisodium citrate linker to phosphonated poly(ether amine) (SPION-TSC-PPEA). This inhibitor showed high calcium ion compatibility and efficient inhibition against calcite and moderate efficiency against barite scales in oil and gas industry applications. The study, funded by the Research Council of Norway, highlights the potential of this nanocomposite for addressing scale buildup challenges in the industry. [Extracted from the article]

Researchers at the National University of Cordoba in Argentina have conducted a study on tiny hybrid modified organosilane-titanium dioxide nanocomposites with dual photonic behavior. The nanoparticles, ranging from 2 to 4 nm in size, were modified with short organosilane and a fluorescent laser dye reporter. The study highlights the potential applications of these nanoparticles in nanophotonics, biophotonics, and nanomedicine. The research was funded by various organizations, including SCOL, NASA, and IMDEA Energy in Spain. [Extracted from the article]

A recent study from the University of Belgrade explores the use of chitosan-clay mineral nanocomposites with antibacterial properties for biomedical applications. Chitosan, a natural heteropolysaccharide, is highlighted for its biocompatibility and antimicrobial activity. The research emphasizes the potential of these bionanocomposites in drug delivery, treating skin infections, and wound healing, offering insights into their preparation, characterization, and future applications in biomedicine. For more information, the full article can be accessed in the International Journal of Molecular Sciences. [Extracted from the article]

A study conducted at the German Cancer Research Center in Heidelberg, Germany, focused on investigating the LET-dependence of dose measurements using nanocomposite Fricke gel dosimeters with carbon ion beams. The research found that the nanocomposite Fricke gel provided a possible solution for 3D dosimetry in carbon ion radiotherapy, showing a linear dose response without quenching for both mono-energetic and spread-out Bragg peak irradiations. The study's findings were published in the journal Radiation Measurements and can be accessed online for further information. [Extracted from the article]

A study conducted at Panjab University in Chandigarh, India, explored the bactericidal and photocatalytic activities of a novel nanocomposite material called AuNRs@CuO. The research involved experimental and theoretical analyses, revealing enhanced antibacterial properties and improved photocatalytic efficacy of the nanocomposite compared to individual components. The study highlights the potential of this nanocomposite for sustainable water treatment technologies, offering a promising advancement in the field of nanotechnology. The research was supported by various scientific organizations and has been peer-reviewed for publication in the Journal of Cleaner Production. [Extracted from the article]

A study published in Industrial Chemistry & Materials explores a new biochar nanocomposite made from Elaeagnus angustifolia gum for detecting acetaminophen (APAP) in urine. The material, activated with ferric chloride and cobalt oxide doping, shows enhanced conductivity and specific recognition of APAP molecules. This research offers a faster, more sensitive, and automated method for APAP detection compared to traditional liquid chromatography, with potential for further improvements in sensor performance. The study was conducted by researchers from Xinjiang Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, and Dezhou University, funded by the Chinese Academy of Sciences. [Extracted from the article]

Researchers at the University of Guadalajara in Mexico have conducted a study on carbon nanotubes and their potential as drug carriers. They synthesized nanocomposites using a terpolymer of poly(L-lactide) (PLLA)-poly(e-caprolactone) (PCL)-poly(ethylene glycol) (PEG) and partially oxidized carbon nanotubes (CNTs [ [po] ]). The nanocomposites were characterized and evaluated for their ability to deliver the anticancer drug methotrexate. The study found that the nanocomposites exhibited a burst effect profile in drug release, and the release mechanism was determined to be Fickian diffusion. This research provides insights into the synthesis and characterization of nanocomposites for drug delivery applications. [Extracted from the article]

Researchers at the Chennai Institute of Technology in India have developed a rapid microwave-assisted method for synthesizing a nanocomposite material called GO/SnTe. This material has enhanced electrocatalytic activity for the oxidation of caffeine and shows promise for developing novel electrochemical sensors. The researchers found that the graphene oxide modified with tin chalcogenides acts as a real-time sensor with specific applications to real samples such as human milk and drug formulations. This research has been peer-reviewed and published in the Journal of Materials Science Materials in Electronics. [Extracted from the article]

Researchers from Tabriz University of Medical Sciences in Iran have published a review on the use of innovative nanocomposite scaffolds containing ZIF-8 nanoparticles for improving wound healing. These scaffolds have shown promise in promoting tissue regeneration due to their biocompatibility, structural stability, and antibacterial properties. The review discusses the synthesis methods, characteristics, and properties of ZIF-8 nanoparticles, as well as their potential applications in various types of scaffolds. It also highlights the biocompatibility and biosafety of ZIF-8 nanoparticles and their multifunctional capabilities. The research concludes by addressing current challenges and future perspectives in developing these nanocomposite scaffolds for wound healing. [Extracted from the article]

A study conducted at the Siddaganga Institute of Technology in Karnataka, India, has investigated the synthesis of ZnO/CuO nanocomposites using Phyllanthus niruri leaf extract. The researchers characterized the synthesized nanocomposites and found that they exhibited superior photocatalytic and antibacterial efficacy. The nanocomposites also showed potential for latent fingerprint applications. This research suggests that the ZnO/CuO nanocomposites could be used as catalysts for wastewater treatment and as antimicrobial agents. [Extracted from the article]

A study conducted by researchers from the Fourth Military Medical University in Shaanxi, China, explores the treatment of infected bone defects using a novel magnetic nanocomposite. The researchers developed a 3D-printed PCL/Fe3O4@ZIF-8 nanocomposite scaffold that exhibited good biocompatibility, antibacterial activity, and osteogenic ability. The scaffold promoted the proliferation and adhesion of bone marrow mesenchymal stem cells and upregulated the expression of osteogenic-related genes and proteins. In vivo experiments demonstrated that the scaffold eliminated infection and promoted new bone formation. The study suggests that the 3D-printed nanocomposite scaffold could be a promising material for the treatment of infected bone defects. [Extracted from the article]

A recent study conducted at the State Key Laboratory focused on the detection of beta-lactam antibiotics (BLAs) in milk, as these antibiotics can accumulate in the human body and pose a risk to human health. The researchers developed an electrochemical receptor sensor using penicillin-binding proteins (PBPs) as receptors. The sensor was fabricated using a graphene/chitosan nanocomposite and demonstrated good selectivity against other antibiotic residues commonly found in milk. The method had low detection limits and a high recovery rate, and the analysis could be completed within 35 minutes. This research provides valuable insights into the development of methods for rapid BLA detection. [Extracted from the article]

Researchers at the Egyptian Petroleum Research Institute have developed a novel porous composite material for the removal of malachite green dye from wastewater. The material, made from a modified chitosan-Schiff base biopolymer combined with magnetite and zinc oxide nanoparticles, acts as an adsorbent for the dye and prevents the growth of microorganisms. The compound demonstrated high adsorption capacity and antibacterial activity, making it a promising candidate for water treatment applications. The biosorbent was also found to be easily regenerated and maintained its adsorption capacity over multiple cycles. [Extracted from the article]

A recent study conducted by researchers at the University of El Oued in Algeria explores the use of chitosan, a biopolymer derived from chitin, in the production and application of metal nanoparticles. The study highlights chitosan's potential as a green reducing agent, shape-directing agent, size-controlling agent, and stabilizer in the manufacturing of metal nanoparticles and nanocomposites. The researchers also discuss the various applications of chitosan-based nanocomposites, including metal removal, water purification, and therapies such as photoacoustic, photothermal, antibacterial, and photodynamic therapies. This research contributes to the advancement of nanotechnology and the development of medicinal and environmental solutions. [Extracted from the article]

Researchers from Arak University in Iran have developed a novel nanocomposite fluorescence sensor for the simultaneous detection and determination of two active pharmaceutical compounds, Tacrolimus and Ulipristal acetate. The nanosensor, made of graphitic carbon nitride doped with La:Y2O3, demonstrated the ability to quickly and accurately detect these drugs. The researchers used a Doehlert design to optimize the factors affecting the fluorescence emission intensity of the nanosensor. Under optimal conditions, the nanosensor achieved a limit of detection of 17 nM for Tacrolimus and 11 nM for Ulipristal acetate. Additionally, the nanocomposite showed promise in the photodegradation of these drugs under visible light irradiation. The research provides insights into the degradation mechanism and the effect of Fenton factors on the degradation process. [Extracted from the article]

Researchers at Women University in Lahore, Pakistan have developed a drug delivery system using nanobiotechnology. The study focused on the fabrication of calcium chloride-crosslinked bionanocomposite hydrogels based on pectin for gastro-retentive drug delivery. The hydrogels exhibited a pH-sensitive swelling profile and sustained release of the drug famotidine over a 24-hour period. The research suggests that these hydrogels have potential for controlled and prolonged drug delivery. [Extracted from the article]

A recent report from the University of Tabriz in Iran discusses the development of chitosan/laponite nanocomposites as pH-dependent drug delivery systems for curcumin, an anticancer drug. The researchers used different techniques to confirm the structure of the synthesized samples and found that the nanocomposites had high loading capacity for curcumin. In vitro studies demonstrated the pH-sensitive release of the drug and the biocompatibility of the nanocarriers. The researchers concluded that these nanocomposites could be used as biocompatible drug delivery systems for chemotherapy applications. [Extracted from the article]

A recent study conducted by researchers at the Avinashilingam Institute for Home Science and Higher Education for Women in Tamil Nadu, India, focused on the treatment of textile dye wastewater through photodegradation. The study examined the use of silane/polymer doped Zno nanocomposites and their effectiveness in degrading Malachite green dye under sunlight, visible, and UV light. The results showed that ZnO/PEG/VTMS nanocomposites were particularly effective in treating textile dye effluent, maintaining their efficiency even after multiple photodegradation cycles. The study also found that these nanocomposites exhibited antibacterial properties against Staphylococcus aureus and Escherichia coli. [Extracted from the article]