Search

In on-site measurement, as the transformer’s structure is often unknown, the application of frequency domain spectroscopy (FDS) is greatly limited in moisture assessment of transformer. This paper proposes a moisture assessment method for oil-immersed paper based on the dynamic characteristic frequency even for an unknown transformer structure. FDS tests are performed on the oil-paper insulation, corresponding oil-immersed paper, and mineral oil under different moisture conditions. The moisture criterion of oil-immersed paper and the influence of the structural parameters on the calculated frequency spectroscopy at different frequencies are discussed. It is concluded that the moisture criterion’s effectiveness, which indicates the sensitivity of assessed moisture content to the error of the tan $\delta $ , changes at different frequencies. Moreover, there are some frequencies at which tan $\delta $ is not influenced by structural parameters and is close to the measured value, which are regarded as “characteristic frequencies.” Based on the characteristic frequency, the moisture content of oil-immersed paper is assessed according to the frequency spectroscopy of oil-paper insulation without the structural parameters. The result shows that the assessing frequency changes under different moisture conditions, and the error of the assessed moisture content is less than 0.1%.

Working under PWM voltage with fast voltage rise time and high frequency, medium frequency transformers may suffer from overvoltage and temperature rise in the winding. As a result, partial discharge may be triggered with high probability, threating the insulation reliability. Therefore, it is necessary to evaluate the insulation capability of medium frequency transformers with respect to partial discharge and deterioration. This paper introduces a test system based on power electronic modules that can generate repetitive pulse voltage. Then, by using this system, partial discharge inception voltage test under different temperatures and endurance lifetime test are conducted on Nomex paper, which is an insulation material usually used in medium frequency transformers. The results show the change trending of the partial discharge inception voltage of Nomex paper with temperature and indicate an accelerated aging of this material with the presence of continuous discharge.

The existing plethora of document classification techniques exploits different data sources either from the content or metadata of research articles. Various journal publishers like Springer, Elsevier, IEEE, etc., do not provide open access to the content of research articles, whereas metadata is freely available there. Metadata like title, keyword, and abstract can serve as a better alternative to the content in various scenarios. In the current literature, researchers have assessed the role of some of the metadata individually. We believe that the collective contribution of metadata parameters can play a significant role in classifying research papers. This paper presents a comprehensive evaluation of the role of metadata, individually as well as in combinations to achieve the objective of research paper classification. Moreover, we have classified the research articles into ACM hierarchy root categories (e.g. general literature, hardware, software, etc.). In this comprehensive evaluation, we have assessed all the possible combinations of metadata features against different classifiers such as Random Forest, K Nearest Neighbor, and Decision Tree. The results of this research reveal that the title & keywords combination outperforms other combinations with an F-measure score of 0.88.

An emerging alternative to conventional Augmented Reality (AR) glasses designs, Beaming displays promise slim AR glasses free from challenging design trade-offs, including battery-related limits or computational budget-related issues. These beaming displays remove active components such as batteries and electronics from AR glasses and move them to a projector that projects images to a user from a distance (1-2 meters), where users wear only passive optical eyepieces. However, earlier implementations of these displays delivered poor resolutions (7 cycles per degree) without any optical focus cues and were introduced with a bulky form-factor eyepiece (50 mm thick). This paper introduces a new milestone for beaming displays, which we call HoloBeam. In this new design, a custom holographic projector populates a micro-volume located at some distance (1-2 meters) with multiple planes of images. Users view magnified copies of these images from this small volume with the help of an eyepiece that is either a Holographic Optical Element (HOE) or a set of lenses. Our HoloBeam prototypes demonstrate the thinnest AR glasses to date with a submillimeter thickness (e.g., HOE film is only 120 um thick). In addition, HoloBeam prototypes demonstrate near retinal resolutions (24 cycles per degree) with a 70 degrees-wide field of view., Comment: 15 pages, 18 Figures, 1 Table, 1 Listing

The Magnetic Observatory of Tatuoca (TTB) was installed by Observatório Nacional (ON) in 1957, near Belém city in the state of Pará, Brazilian Amazon. Its history goes back to 1933, when a Danish mission used this location to collect data, due to its privileged position near the terrestrial equator. Between 1957 and 2007, TTB produced 18,000 magnetograms on paper using photographic variometers, and other associated documents like absolute value forms and yearbooks. Data was obtained manually from these graphs with rulers and grids, taking 24 average readings per day, that is, one per hour. In 2017, the Federal University of Pará (UFPA in the Portuguese acronym) and ON collaborated to rescue this physical archive. In 2022 UFPA took a step forward and proposed not only digitizing the documents but also developing an intelligent agent capable of reading and extracting the information of the curves with a resolution better than an hour, being this the central goal of the project. If the project succeeds, it will rescue 50 years of data imprisoned in paper, increasing measurement sensitivity far beyond what these sources used to give. This will also open the possibility of applying the same AI to similar documents in other observatories or disciplines like seismography. This article recaps the project, and the complex challenges faced in articulating Archival Science principles with AI and Geoscience.

The time-to-failure for oil-impregnated paper (OIP) insulation is governed by two primary aging mechanisms: electrical and thermal. The electrical life can be represented as an Inverse Power Law, where lifetime is inversely proportional to applied electric field. The process of thermal aging on the other hand is established by Arrhenius Law, which relates the rate of aging exponentially to temperature. Due to thermal aging, the structure of insulation is altered owing to chemical changes like oxidation, polymerization, and cellulose degradation. For life estimation of a service-aged high-pressure gas filled (HPGF) cables, electrical endurance tests are normally performed at controlled voltage levels to estimate the time to breakdown. However, it is equally necessary to investigate how thermal aging influence changes in the electrical life of insulation. Therefore, in this paper, firstly short-term ramped stress tests are carried out on elevated thermal aged OIP samples extracted from already field-aged HPGF to find a rough estimate of breakdown voltages at different temperatures. Then, long-term electro-thermal step stress tests are performed on the samples to establish a correlation of temperature on the electrical life of the OIP insulation. The long-term stress tests produce reliable breakdown statistics and Maximum Likelihood Estimation of Inverse Power Law fitted on 2-parameter Weibull distributed breakdown data indicate a reduction of model parameter, n from 13.61 to 7.38 with an increase in temperature from 45 to 75 °C and a constant shape factor, beta of 1.50. The dissipation factor, tandelta related to the aging also shows an increase with temperature across a wide frequency range and is inversely proportional to the breakdown voltage.

Inclusion and accessibility in visualization research have gained increasing attention in recent years. However, many challenges still remain to be solved on the road toward a more inclusive, shared-experience-driven visualization design and evaluation process. In this position paper, we discuss challenges and speculate about potential solutions, based on related work, our own research, as well as personal experiences. The goal of this paper is to start discussions on the role of accessibility and inclusion in visualization design and evaluation., Comment: 8 pages, IEEE VIS BELIV 2022 workshop, preprint

Researchers face difficulties in finding relevant papers to their research interest as the number of scientific publication is rapidly increasing on the web. Scientific paper recommenders have emerged as a leading solution to help researchers by automatically suggesting relevant and useful publications. Several approaches have been proposed on improving recommender systems. However, most existing approaches depend on priori user profiles, and thus they cannot recommend papers to new user. Furthermore, the existing approaches utilize non-public contextual information, and thus it cannot adequately find similarities between papers due to copyright restrictions. Also, the existing approaches consider only single level paper-citation relation to identify similarities between papers. Considering the above challenges, this paper presents a collaborative filtering based recommendation approach for scientific papers that does not depend on priori user profiles and which utilizes only public contextual information. Using citation context, we utilized 2-level paper-citation relations to find hidden associations between papers. The rational underlying this approach is that, two papers are co-occurred with same cited paper(s) and two papers are co-occurring with same citing paper(s) are significantly similar to some extent. To evaluate the performance of the proposed approach, publicly available datasets are used to conduct extensive experiments. The experimental results demonstrate that the proposed approach has significantly outperforms the baseline approaches in terms of precision, recall, F1, mean average precision, and mean reciprocal rank, which are commonly used information retrieval metrics. The novelty of this study is that, with the proposed approach, researchers are able to find relevant and useful publications over the internet regardless of their previous research experiences and research area.

In paper production, a jumbo reel is cut into multiple intermediate rolls, and each intermediate roll is then sheeted as finished goods. This problem is called a cutting stock problem and is proven to be NP-hard. The objective is to minimize material waste or trim loss from all the cuttings. In the case that any intermediate roll is not entirely used for its associated order, the intermediate roll itself could turn to be a dead stock. We use the concept of universal sizes of intermediate rolls to eliminate the dead stock. A pre-defined number of universal sizes of intermediate rolls is to be used to serve all the orders. The problem is solved using Reinforcement Artificial Bee Colony algorithm with Integer Linear Programming subroutine. This proposed approach is then tested with a set of 1,055 orders and 127 different sizes of sheet papers from a paper manufacturer. The results reveal that our method outperforms other algorithms. Our method offers the total trim loss of 3.51%, compared to the trim loss reported by the industry of at least 5%. This approach not only reduces the number of partially cut rolls, but also decreases the number of the jumbo reels needed to serve all the orders. Therefore, both the inventory cost and material cost can be saved.

Cellulosic fibre composites from agriculture waste product bast fibre such Empty Fruit Bunch (EFB) oil palm has lower cost than normal softwood fibre and they are great alternative to be considered in insulation papermaking. For this purpose, EFB fibre, kenaf fibre and their blend were used to fabricate electrical presspaper samples through a laboratory papermaking process. The study of physical, mechanical and electrical properties such as cellulosic structure, tensile strength, AC voltage breakdown and lightning impulse breakdown strength were conducted according to the standard testing method of insulation IEC60243-1:2013. From this research, the physical structure, mechanical and electrical behaviour of mixed EFB and kenaf fibre insulation paper are comparable to Kraft paper and qualified the basic criterion to be an electrical insulation paper as required by IEC60641-2 standard. The purposes of this insulation paper produced is to be use in electrical transformers, therefore the same test should be repeated to the insulation paper that have undergone aging process at normal and accelerated operating temperatures.

The explicitly numerical or well-defined correlations between the dielectrics responses (DRs) and dielectric essences of oil-impregnated paper (OIP) insulation have not been fully understood yet. As a result, it is rather difficult to quantitatively diagnose the critical insulation condition, like determining moisture content in insulation paper (MCP) of power equipment only using electrical-based techniques such as frequency domain spectroscopy (FDS). To obtain MCP value, from a new perspective of parametric study on the circuital DR equivalence of OIP insulation-extended Debye model (EDM), the present contribution introduces a novel approach by exploring the pattern when EDM parameters vary with MCP and temperatures T. Further, mathematical correlations are developed between sensitive R-C values and MCP-T values. On the above analysis, small-scale physical models of real-life transformer bushings were prepared as test samples. Their OIP condenser bodies were artificially absorbed different controlled quantities of moisture and conditioned at different temperatures to record corresponding FDS results. Then a hybrid genetic algorithm combined with the Levenberg-Marquardt algorithm was proposed to estimate the EDM parameters by fitting the measured FDS data. Sensitive parameters therein were identified using subspectrum decomposition and formulated with MCP-T values so that a reliable moisture content estimation can be achieved once the testing temperature and FDS recordings of an insulation body are known.

Trap plays an important role in the charge transportation of three-layer oil-paper and the investigation of trap parameters at different degradation degree is of great significance for further research of the partial discharge (PD) mechanism. This article considers the turn-to-turn structure of on-board traction transformer. A defect model of three-layer oil-paper insulation was designed for PD test. The PD degradation samples are selected from the inception of PD to the breakdown of PD to study the characteristics of surface potential decay on degradation samples by using isothermal surface potential decay method. Given that, the trap distribution at different degradation stages was calculated and its influence on PD characteristics was investigated. The result shows that AC fluctuation voltages caused by inter-harmonic has a great influence on PD distribution, surface charge distribution and trap distribution. With the increase of degradation, the decay rate of surface potential increases and the decay rate of AC fluctuation voltages is larger than that pure AC. And also, the number of shallow trap with AC fluctuation voltages is larger than that with pure AC. The rate of free charge increases with the number of shallow trap increasing. More free electrons involves in the process of PD, accelerating the aging rate of three-layer oil paper samples. Therefore, it can be concluded that surface charge and trap distribution are helpful to clarify PD mechanism.

The oil-paper insulation system is widely used for the insulation purposes of power transformers as a result of its ability to withstand high thermal and electrical stresses. The presence of a gas cavity between impregnated papers layer is a serious problem. When localized breakdown takes place within this cavity, partial discharge (PD) occurs and ages the rest of the insulation system. This aging phenomenon declines the expected life time of the insulation system and subsequently the life time of the power transformers. Dissolved gas analysis is a recommended technique that is used in order to assess the state of the insulation system inside the transformers. In this paper, PD is recorded in the case of gas cavity presence between the layers of the impregnated papers under the effect of AC and DC voltage stress. This record is extended from the instance of PD inception until the breakdown of the whole insulation system. Furthermore, the concentration of the gases that dissolve in the insulating oil due to the aging of the impregnated paper is measured eight times during the record of the PD. Finally, the degradation of the insulating papers is studied optically through the use of a microscope at different stages of the aging test. Depending on PD measurements, dissolved gas analysis (DGA) results, and the optical study of the paper aging, the evolution of the aging of oil-paper insulation system as a result of internal PD is declared when AC and DC voltage stresses are applied. It is obtained that the aging evolutionary process totally differs with the alteration of the applied voltage.