Search

Comprehensive Summary: Duration‐tunable afterglow materials have garnered considerable attention in various applications. Herein, carbon dots (CDs)‐based long persistent luminescence (LPL) composites with a tunable duration in an ultrawide range of seconds‐to‐hours levels were designed and prepared for the first time. In contrast to the established CD‐based afterglow materials, we reported that CD‐based composites exhibit LPL in the form of exciplexes and long‐lived charge‐separated states, enabling the LPL to be prolonged from several seconds to over one hour, exceeding the typical regulation range (limited to 1 min). Further studies revealed that the relationship between the excited and charge‐transfer states of CDs plays a pivotal role in activating the LPL and regulating its duration. Furthermore, these composites exhibited high photoluminescence (PL) quantum yields of up to 60.63%, and their LPL was robust under ambient conditions, even in aqueous media. Their robust and superior LPL performance endows these composites with a strong competitive advantage in dynamic display systems, such as tags for time‐resolved data encryption and displays of the remaining time of takeaways. This study offers an approach to preparing CDs‐based LPL composites with tunable durations and may provide new insights for the development of rare‐earth‐free LPL materials. [ABSTRACT FROM AUTHOR]

Background: Even though monitoring and control enactment are key aspects of self‐regulated learning (SRL), Adaptive learning technologies (ALTs) may reduce the need for learners to monitor and control their learning. Personalized dashboards are effective in supporting learners' monitoring and can potentially support control behaviour. Allowing learners to enact control over their learning process, seems to hold potential for increasing their motivation. Objectives: Therefore, this study's aim was to investigate the relation between control enactment and motivation. We examined how learners enacted control while learning with an ALT with personalized dashboards and examined the relation between learners' enactment of control and their motivation. Methods: Seventy‐eight primary school learners (Grade 5) participated. During the lesson, learners worked on mathematics in the ALT and concurrently were shown personalized visualizations that supported monitoring and enacting control over their learning process. Learners could enact control to change problems' difficulty to easy, medium, or hard. Motivation was measured before and after learning. Results: The SEM analyses showed that how learners enacted control was related to their motivation. Choosing difficult problems was related to more enjoyment and competence while choosing easy problems related to more pressure and tension. Learners who complied with the suggested difficulty level experienced less choice, but also less pressure/tension and more enjoyment and competence. Conclusions: These results provide avenues to account for broader learner characteristics like SRL and motivation to optimize learning. This way, hybrid systems in which control enactment is a shared responsibility of the system and learner, can be improved to support SRL development. Lay Description: What is currently known: Monitor and control enactment are key aspects of self‐regulated learning (SRL).Adaptive learning technologies may reduce the need for learners to monitor and control their learning.Personalized dashboards support learners' monitoring behaviour and can potentially also support control enactment.Enactment of control could positively affect learners' motivation. What does this paper add: There is a large variation in how learners enact control and whether they comply with the scaffold.Learners who chose more difficult problems experienced more enjoyment, while learners choosing easy problems, experienced more pressure.Learners complied with the scaffold, experienced less choice, but also less pressure and more enjoyment.This study provides avenues to account for broader learner characteristics like SRL and motivation to optimize learning. Practical implications: Support control enactment by actively involve learners in choice during the learning process.Offer monitor and enactment in conjunction, as learners can only make well‐founded choices if they can monitor their learning process.Intrinsically and extrinsically motivated learners showed different choice patterns and learning experience.It is important to have an understanding and monitoring of learners' motivation. [ABSTRACT FROM AUTHOR]

Electrochromic devices (ECDs) possess the performance advantages in terms of color adjustability, low power consumption, and visual friendliness, emerging as one of the ideal candidates for energy‐efficient smart windows, next‐generation displays, and wearable electronics. The optical and electrical characteristics of ECDs can be adjusted by modifying the materials or structure of devices. This review summarizes the recent developments of innovative technologies and key materials of ECDs for display applications, highlighting the key issues and development trends in this area. [ABSTRACT FROM AUTHOR]

With the development of the information industry, the wearable three‐dimensional (3D) near‐eye display that can provide complete visual information has attracted increasing attention. Compared with other existing 3D display technologies, the holographic display is a promising true 3D display technology that can fully record and reproduce the original 3D scenes. The ability to present a continuous parallax and depth perception gives holography technology an unprecedented promise in the next‐generation 3D near‐eye display. However, currently available holographic near‐eye display systems can only provide a limited viewing area (including the field of view and eyebox), greatly restricting its practical application. Focusing on the development requirements of large viewing‐area 3D holographic near‐eye display, the reasons are introduced first why the viewing area of current holographic displays is limited and then the existing solutions from different aspects, including multiplexing‐based methods, steering viewing window methods, aperiodic wavefront modulation methods, and some emerging holographic display technologies are summarized. These various solutions are analyzed respectively, and their representative works are investigated. In addition, the different applications of holography in the near‐eye display system are also discussed. Finally, the advantages and disadvantages of these techniques are compared and perspectives are given. [ABSTRACT FROM AUTHOR]

NASICON-structured Li 1.3 Al 0.3 Ti 1.7 (PO 4) 3 (LATP) solid electrolyte has low grain boundary conductivity, which impedes its practical application. Herein, W was adopted to partially replace the Al element in LATP to improve its grain boundary conductivity. The W doping reduces the crystal lattice of the electrolyte, which is detrimental to the grain conductivity. But the doping of W can make the grains closely connect and reduce the voids between the grains, which can greatly enhance the grain boundary conductivity. The LATP sample with the W doping content of 0.03 (LATWP003) exhibits the highest total ionic conductivity of 1.186 mS/cm at 30 ℃, which results from the optimum grain boundary conductivity of 2.315 mS/cm. Moreover, the LATWP003 electrolyte displays a negligible electronic conductivity of 2.01×10−9 S/cm. The LiFePO 4 /LATWP003/Li battery with PVDF-HFP polymer protective layer can be charged and discharged. Therefore, the W doped LATP sample is a promising electrolyte for lithium-ion batteries. [ABSTRACT FROM AUTHOR]

Flexible glass with high bending strength is a remarkable component of flexible electronic displays. However, as a brittle material, its bending properties often do not meet requirements of application. To address this challenge, the application of chemical strengthening stands out as a viable approach to significantly bolster scratch resistance and bending strength in flexible glass. This study focuses on a conventional one‐step chemical strengthening method, employing molten potassium nitrate, to reinforce ultrathin aluminosilicate glass produced through the secondary down‐drawing thermoforming process. Effects of ion‐exchange temperature and time on mechanical properties of strengthened 110 µm flexible glass were investigated, and moreover, properties of strengthened ultrathin flexible glass with various thicknesses were compared. The results indicate that, after chemical strengthening at 380°C for 1 h, the compressive stress (CS) of 110 µm glass reaches 864.60 MPa, and the depth of layer is 15.86 µm, at which time the glass has the best bending performance and scratch resistance, and half of the faceplate spacing during glass breakage can be enhanced from 38.02 ± 2.7 to 8.40 ± 0.62 mm. For ultrathin flexible glass from 40 to 110 µm, after treatment at 380°C for 1 h, the CS of thick glass is higher than that of thin glass, and the enhancement of bending performance is better. [ABSTRACT FROM AUTHOR]

Electronic paper displays rely on electrokinetic effects in nonpolar solvents to drive the displacement of colloidal particles within a fluidic cell. While Electrophoresis (EP) is a well-established and frequently employed phenomenon, electro-osmosis (EO), which drives fluid flow along charged solid surfaces, has not been studied as extensively. We hypothesize that by exploiting the interplay between these effects, an enhanced particle transport can be achieved. In this study, we experimentally investigate the combined effects of EP and EO for colloidal particles in non-polar solvents, driven by an electric field. We use astigmatism micro-particle tracking velocimetry (A- μ PTV) to measure the motion of charged particles within model fluidic cells. Using a simple approach that relies on basic fluid flow properties we extract the contributions due to EP and EO, finding that EO contributes significantly to particle transport. The validity of our approach is confirmed by measurements on particles with different magnitudes of charge, and by comparison to numerical simulations. We find that EO flows can play a dominant role in the transport of particles in electrokinetic display devices. This can be exploited to speed up particle transport, potentially yielding displays with significantly faster switching times. Interplay of electrokinetic effects : Driven by the applied electric field, both electro-osmosis (EO, top left), which drives a flow along the surfaces of the fluidic cell, and electrophoresis (EP, top right), which drives a migration of particles relative to the background liquid, occur in our system. A typical example of the resultant particle velocity field (bottom) illustrates the important role of EO on particle transport in the fluidic cell. • Studied electrokinetics of particles in nonpolar solvent using astigmatism micro-PTV. • Both electrophoresis (EP) and electro-osmosis (EO) play important roles. • Combination of EO and EP could be exploited in faster switching e-paper displays. [ABSTRACT FROM AUTHOR]

Attaining highly uniform operations in a disordered system presents a persistent challenge. The utilization of ion migration in amorphous materials to trigger the resistive switching process of the material usually results in inferior uniformity of the memristive device. Here, we demonstrate that the resistive switching behavior can be activated through carrier doping in the disorder system, and highly ordered resistance modulation is achieved in Ag-doped albumen. By manipulating the doping level of the carrier, the localization of the free electron wavefunction can be tuned, leading to multi-level variations in resistance. This memristive switching behavior is in all electronic and displays excellent switching uniformity, holding great potential for applications in high-density memories and neuromorphic computing chips. [ABSTRACT FROM AUTHOR]

Introduction: Quantitative research and quality improvement (QI) both seek to improve care provided to patients. However, clinicians often blur the lines between how to appropriately analyze data from these methodologies. Clinicians may inappropriately use statistical analyses for QI initiatives, rather than using run and statistical process control (SPC) charts to analyze improvements in outcomes. Objective: The purpose of this article was to address the analytic methods used for QI initiatives in the clinical setting in an effort to show clinicians how to identify meaningful improvements in clinical practice. Methods: In this article, we provide an example comparing the same evidence-based practice/QI initiative (chlorhexidine gluconate bathing in a medical intensive care unit) using a quasi-experimental pretest/posttest research design with statistical analyses completed with t tests with analyses using run and SPC charts to show the data trended over time. Using a pretest/posttest design, chlorhexidine gluconate bathing compliance improved from 63%to 65%, a nonsignificant change, P = .075. These same data plotted on run and SPC charts, however, show a shift and a trend, indicating clinically significant improvements per QI methodologies. Conclusion: The example in this article highlights the pitfall of relying only on statistical analyses and P values to determine the importance of a clinical project, and provides a practical example for how run or SPC charts can be used to identify improvements over time. [ABSTRACT FROM AUTHOR]

Electrochromic devices have important applications in building energy conservation, next‐generation displaying, and security encryption, while durable and high‐performance electrochromic materials are highly desirable. Herein, a Zn‐based electrochromic smart window by using 3D ordered macroporous amorphous WO3 (a‐WO3) arrays as cathode is reported. Benefiting from a 3D ordered macroporous structure with a high specific surface area that accelerates the ion diffusion and migration, and the oxygen vacancy modulated a‐WO3 providing abundant zinc ion insertion channels, the as‐fabricated zinc‐based a‐WO3 inverse opal (a‐WO3‐IO) device exhibits excellent electrochromic properties, including large light modulation (83% optical contrast at 700 nm), fast response time (5.3 s for coloring and 3.2 s for bleaching), and robust cycling stability. Moreover, a solid‐state a‐WO3‐IO prototype electrochromic smart window is demonstrated for light modulation, electronic display, and power supply. Furthermore, experimental results and theoretical calculations reveal that 3D macroporous amorphous WO3 with rich oxygen vacancies can enhance the zinc ion absorption and diffusion, leading to the enhancement of electrochromic performance. [ABSTRACT FROM AUTHOR]

New crystalline tetranuclear cluster is prepared by the interaction of manganese(II) chloride with calix[4]arene 3 functionalized at the upper rim by distal p-(4-nitrophenyl)diazenyl and p-tert-butyl groups displaying different electronic effects and sizes. The structure of the cluster is studied by single-crystal XRD. Due to the presence of (4-nitrophenyl)diazenyl moieties at the upper rim of the macrocyclic ligand, the molecules of the tetranuclear clusters are involved in π-stacking interactions leading to the formation of 2D supramolecular layers affording a porous crystal packing. [ABSTRACT FROM AUTHOR]

Simple Summary: This interview study delves into the potential of using AI-based clinical decision support systems (CDSSs) during meetings focused on multidisciplinary team meetings (MDTMs) for breast cancer. The goal was to pinpoint the obstacles and to aid in implementing such a system within these meetings. Through 24 interviews with breast cancer team members across three hospitals, key insights emerged. Those involved showed interest in integrating CDSSs into their workflow, foreseeing benefits like enhanced data visualization, time-saving functionalities, and improved documentation. However, concerns lingered around data connectivity, the accuracy of suggestions, and the risk of losing the human touch in decision making. Overall, this research reveals the curiosity among clinicians to explore CDSS benefits but acknowledges the complexity of integrating these systems, offering insights to potentially streamline future implementation processes. Background: AI-driven clinical decision support systems (CDSSs) hold promise for multidisciplinary team meetings (MDTMs). This study aimed to uncover the hurdles and aids in implementing CDSSs during breast cancer MDTMs. Methods: Twenty-four core team members from three hospitals engaged in semi-structured interviews, revealing a collective interest in experiencing CDSS workflows in clinical practice. All interviews were audio recorded, transcribed verbatim and analyzed anonymously. A standardized approach, 'the framework method', was used to create an analytical framework for data analysis, which was performed by two independent researchers. Results: Positive aspects included improved data visualization, time-saving features, automated trial matching, and enhanced documentation transparency. However, challenges emerged, primarily concerning data connectivity, guideline updates, the accuracy of AI-driven suggestions, and the risk of losing human involvement in decision making. Despite the complexities involved in CDSS development and integration, clinicians demonstrated enthusiasm to explore its potential benefits. Conclusions: Acknowledging the multifaceted nature of this challenge, insights into the barriers and facilitators identified in this study offer a potential roadmap for smoother future implementations. Understanding these factors could pave the way for more effective utilization of CDSSs in breast cancer MDTMs, enhancing patient care through informed decision making. [ABSTRACT FROM AUTHOR]

In the pursuit of highly active electrocatalysts is crucial to overcome the sluggish kinetics of oxygen evolution reaction (OER). Herein, Fe–CoS 2 /carbon nanotubes anchored on carbon polyhedron (Fe–CoS 2 /CNT CPs) is prepared by using zeolitic imidazolate framework-8@zeolitic imidazolate framework-67 (ZIF-8@ZIF-67) as template. A series of analysis demonstrates the incorporation of Fe via wrapped Fe-EDTA can exert charge transfer between Co and Fe and optimize the adsorption of targeted intermediates, which favors for enhanced OER performance. Moreover, the catalytic effect of Co and Fe not only promotes the growth of carbon nanotubes but also enhances the degree of graphitization. The carbon skeletons embedded with carbon nanotubes derived from ZIF-8@ZIF-67 offer high specific surface area and strengthen the electrical conductivity of Fe–CoS 2 /CNT CPs. Therefore, compared with its counterpart and commercial RuO 2 , the designed Fe–CoS 2 /CNT CPs with regulated electronic structure displays the lowest overpotential of 293 mV at the current density of 10 mA cm−2 in 1.0 M KOH solution for OER. This work explores a facile strategy for manipulate electronic structure and electrical conductivity of metal-organic frameworks derived catalysts simultaneously for robust OER electrocatalysts. • Fe–CoS 2 /CNT CPs is prepared by template assisted method. • The catalytic effect of Co and Fe facilitates the growth of carbon nanotubes. • The charge transfer between Co and Fe optimizes the adsorption of intermediates. • Carbon nanotubes along with carbon skeleton offer electron transport channels. • Fe–CoS 2 /CNT CPs exhibits superior OER activity with the overpotential of 293 mV. [ABSTRACT FROM AUTHOR]

Perception in virtual reality is often compared to the perception of pictures. There are, however, important differences. A virtual reality environment, unlike a picture, is interactive and immersive. These properties give rise to novel theoretical challenges. Building on James J. Gibson's analysis of the perception of depictions, we raise three questions about perception in virtual reality, to which we offer tentative answers: (1) Is virtual reality a kind of picture perception? Answer: No. A virtual reality headset is better understood not as an image-based display but as a pair of electronic spectacles that allow the wearer to sample a simulated ambient optic array. (2) Who creates the information in virtual reality? Answer: The information is a joint creation of hardware developers, software engineers, and the observer. The observer is a co-creator of the information that they detect. (3) Are there affordances in virtual reality? Answer: Yes, but there are limitations on what a given virtual reality environment can provide to its users, resulting from the details of how the environment is implemented. An accurate understanding of the perceptual information available in virtual reality may contribute to current philosophical debates on the nature of experience in virtual reality. [ABSTRACT FROM AUTHOR]

BACKGROUND: The monitoring of fetal heart rate (FHR) before intrapartum has been crucial in modern obstetrics. FHR has been used for about 300 years to determine fetal status, leading to the development of monitoring devices to prevent fetal death during gestation. While medical devices like fetal electrocardiograms exist for disease detection, their size and cost limit individual use. OBJECTIVE: To address cardiovascular issues during pregnancy, a mobile system is developed to display heart rates and blood pressure on mobile devices. The system is generated from a medical device with Bluetooth communication, supplementing traditional monitoring. METHOD: The study focuses on creating a mobile system that connects to mobile operating systems, enhancing treatment, diagnosis, and patient monitoring. The mobile system displays cardiovascular data obtained from the medical device. RESULTS: The results are expected to have an immediate impact on cases where abnormal measurement parameters of the monitoring system occur during pregnancy. The use of mobile systems or applications on smartphones is seen as beneficial in distributing processing and census of embedded health systems. CONCLUSION: The study highlights the potential benefits of mobile systems in distributing processing for health systems, particularly in addressing cardiovascular problems during pregnancy. The creation of a mobile system for displaying cardiovascular data could significantly improve monitoring and early detection. [ABSTRACT FROM AUTHOR]

Part 1 of the AMEE Guide Online learning in health professions education focused on foundational concepts such as theory, methods, and instructional design in online learning. Part 2 builds upon Part 1, introducing technology tools and applications of these foundational concepts by exploring the various levels (from beginner to advanced) of utilisation, while describing how their usage can transform Health Professions Education. This Part covers Learning Management Systems, infographics, podcasting, videos, websites, social media, online discussion forums, simulation, virtual patients, extended and virtual reality. Intertwined are other topics, such as online small group teaching, game-based learning, FOAM, online social and collaboration learning, and virtual care teaching. We end by discussing digital scholarship and emerging technologies. Combined with Part 1, the overall aim of Part 2 is to produce a comprehensive overview to help guide effective use online learning in Health Professions Education. [ABSTRACT FROM AUTHOR]

Visual misinformation poses unique challenges to public health due to its potential for persuasiveness and rapid spread on social media. In this article, librarians at the University of Pittsburgh Health Sciences Library System identify four types of visual health misinformation: misleading graphs and charts, out of context visuals, image manipulation in scientific publications, and AI-generated images and videos. To educate our campus's health sciences audience and wider community on these topics, we have developed a range of instruction about visual health misinformation. We describe our strategies and provide suggestions for implementing visual misinformation programming for a variety of audiences. [ABSTRACT FROM AUTHOR]

The Generalized Overview of the NIH Data Management and Sharing Policy Effective 2023.01.15 (Generalized Overview) is an instructional material that provides a basic, clear, and linear understanding of the NIH policy and its requirements. While not developing or utilizing new technology, the Generalized Overview is innovative and notable for creatively using a freely available graphic design tool to translate government policy language into an accessible and understandable infographic that can disseminate important information about the NIH DMS Policy needed by researchers and by those who support them. Shared via a Creative Commons license, others may fully adapt the infographic or may simply add their own institutional contact information. The Generalized Overview can be used by any who find themselves responsible for publicizing and/or teaching the NIH Data Management and Sharing Policy at their respective libraries and institutions. It is intended for educational purposes only and should not be used as a substitute for official guidance from the NIH. [ABSTRACT FROM AUTHOR]

A materials scientist named Frank Mücklich has won the Albert Keil Prize for his work in improving the reliability of electrical contacts in cars. Mücklich developed a laser surface texturing procedure that makes the surfaces of electrical contacts more stable and efficient, reducing electrical contact resistance by up to 80%. This is significant for the reliability and safety of autonomous vehicles and the transition to more sustainable forms of energy. In other news, Oxford Instruments has launched the Oxford Instruments Innovation Center, a facility that showcases the company's analytical innovations and provides training and collaboration opportunities for scientists and researchers. Additionally, Sherwin-Williams has introduced the Heat-Flex 7000 thermal insulative coating system, which offers personnel protection, insulating capabilities, and solar heat reflectivity for industrial applications. The single-component, spray-applied coating system eliminates the need for conventional insulation and cladding systems, reducing costs and the risk of corrosion under insulation. [Extracted from the article]

Topological transition metal dichalcogenides (TMDCs) have attracted much attention due to their potential applications in spintronics and quantum computations. In this work, the structural and electronic properties of topological TMDCs candidate ZrTe2 are systematically investigated under high pressure. A pressure‐induced Lifshitz transition is evidenced by the change of charge carrier type as well as the Fermi surface. Superconductivity is observed at around 8.3 GPa without structural phase transition. A typical dome‐shape phase diagram is obtained with the maximum Tc of 5.6 K for ZrTe2. Furthermore, the theoretical calculations suggest the presence of multiple pressure‐induced topological quantum phase transitions, which coexists with emergence of superconductivity. The results demonstrate that ZrTe2 with nontrivial topology of electronic states displays new ground states upon compression. [ABSTRACT FROM AUTHOR]

Aerosol jet printing (AJP) is a new non-contact direct writing technique designed to achieve precise and intricate patterns on various substrates. Specifically, the pneumatic AJP process breaks down the ink into fine particles, significantly reducing the risk of nozzle clogging and rendering it highly advantageous for industrial applications. This paper focuses on the optimization of the line electrode formation process using soluble silver clusters as the conductive ink, along with the aerosol formation procedure. The main parameters of the AJP process, namely sheath flow rate, atomizer flow rate, and dispensing speed, were identified and examined for their influence on line width and resistivity. Through this analysis, an operability window, including optimized conditions for printing high-quality lines using the AJP process, was established, along with a regression equation enabling the statistical estimation of line width. In summary, the outcomes of this investigation underscore the feasibility of an integrated printing system capable of precision control over line width, achieved through the optimization of AJP process parameters. Furthermore, it was established that pneumatic AJP offers robust process stability. The practical applicability of the proposed optimization techniques was assessed, highlighting their potential utilization in electrode formation processes within the electronic and display industry. [ABSTRACT FROM AUTHOR]

Cryo‐electron microscopy (cryo‐EM), especially single‐particle analysis, has become a powerful technique for visualizing the structure of biological macromolecules at high resolution. However, data acquisition in cryo‐EM is time consuming because it requires the collection of thousands of images to achieve a high‐quality reconstruction. Real‐time preprocessing and display of the images can greatly enhance the efficiency and quality of data collection. This study presents AutoEMage, a new open‐source software package that automates data transfer, preprocessing and real‐time display in cryo‐EM experiments. AutoEMage also includes a real‐time data monitoring system that alerts users to issues with their data, allowing them to take corrective actions accordingly. The software is equipped with an easy‐to‐use graphical user interface that provides seamless data screening and real‐time feedback on data quality and microscope status. [ABSTRACT FROM AUTHOR]

Navigation is a joint operation between humans and technology. Navigating high-speed craft (HSC) is a more critical and risky task than other types of ship navigation due to high speed and time limitations. Situational awareness (SA) is the understanding of what is going on around the navigators. HSC navigator who has an insufficient level of SA may lead to wrong decisions and even accidents. In this study, an analysis of Turkish HSC navigators' SA levels has been carried out in their working environment. Situational Awareness Rating Technique (SART) and pairwise comparison of the effects of Electronic Chart Display and Information System (ECDIS), Automatic Radar Plotting Aid (ARPA), Automatic Identification System (AIS) and autopilot on SA questionnaires were applied. According to SA, navigation operations, factors that mostly affect SA and suggestions that would increase SA were sorted in accordance with the navigators' perceptions. The results show that the level of HSC navigators' SA is high and sufficient. Finally, considerations are introduced to keep acceptable levels or increase SA on HSCs. [ABSTRACT FROM AUTHOR]

Purpose: To determine the impact of a business intelligence dashboard tool to optimize automated dispensing cabinets (ADCs). Methods: A pre-post implementation design was used to evaluate key performance indicators (KPI) before and after the implementation of a dashboard tool to optimize ADCs. Eleven ADCs were optimized in 2 phases according to dashboard recommendations: (1) removal of unused medications over 90 days, (2) adjusting periodic automatic replenishment (PAR) levels, and (3) addition of commonly dispensed medications. The KPI measures that were assessed included inventory cost, no. of stocked medications, stockout percentage, vend to refill ratio, and missing dose messages from nursing. An interrupted-time-series regression was used to quantify the impact of ADCs on the means of measured KPIs. Results: Differences in mean distribution of all KPIs, except missing dose, between the pre- and post-ADC periods during the Phase 1 period were statistically significant: inventory cost (54.2 vs 56), stockout percentage (1.55 vs 1.12), vend to refill ratio (6.83 vs 6.14), and missing dose messages (221 vs 229). Only the mean ADC utilization (57.3 vs 64) and missing dose (228 vs 179) were statistically different between the pre- and post-ADC periods in Phase 2. The interrupted-time-series analysis showed that Phase 1 optimization significantly reduced the cost of inventory (β = −$1.238.00, P <.01), no. Stocked medications (β = −8.2, P <.01), percent stockout (β = −.49%, P <.01), vend-to-refill ratio (β = −1.29%, P<.01) and ADC utilization (β = −.2, P <.01). Conclusion: Automated dispensing cabinets optimization, through the use of a dashboard tool, had a positive impact on almost all measured KPIs. [ABSTRACT FROM AUTHOR]

Dual-display encoded libraries have resulted in the identification of pairs of synergistic binders, which have been further developed into high-affinity ligands. Novel selection modalities based on simultaneous display of binding molecules with molecules of selected functionality have recently been developed, creating opportunities for screening target proteins both in solution and in a cellular context. The versatility of encoding designs makes it possible to modulate the distance between ligands. Dual-display libraries can be used to explore ligand geometry and spacing for improving binding synergy. Affinity maturation by selections is an established use of dual-display encoded libraries and is an accessible method for improving the binding affinity of known ligands. DNA-encoded chemical library technology (DECL or DEL) has become an important pillar for small-molecule drug discovery. The technology rapidly identifies small-molecule hits for relevant target proteins at low cost and with a high success rate, including ligands for targeted protein degradation (TPD). More recently, the setup of DNA- or peptide nucleic acid (PNA)-encoded chemical libraries based on the simultaneous display of ligand pairs, termed dual-display, allows for more sophisticated applications which will be reviewed herein. Both stable and dynamic dual-display DEL technologies enable innovative affinity-based selection modalities, even on and in cells. Novel methods for a seamless conversion between single- and double-stranded library formats allow for even more versatility. We present the first candidates emerging from dual-display technologies and discuss the future potential of dual-display for drug discovery. [ABSTRACT FROM AUTHOR]

This paper introduces a novel differentiator-based maximum power point tracking (MPPT) controller for a wind energy conversion system (WECS) equipped with a doubly fed induction generator (DFIG). Building upon our previous algorithms, the proposed controller reduces the need for detailed system information and displays enhanced robustness against parameter variations and disturbances. The innovation lies in the elimination of the need for explicit functional forms or specific parameter values in the system's dynamics, relying solely on relative degrees and control directions. Utilizing a higher-order switching differentiator (HOSD), this paper outlines a method for overestimating the time derivatives of system outputs, thereby simplifying both the controller design and stability analysis. Compared to existing solutions, the proposed method requires minimal information, offers simpler control law structures, and follows a systematic design approach with fewer design constants. Simulation results demonstrate the efficacy of the proposed controller in both tracking maximum power and regulating reactive power to zero, suggesting a more efficient and simplified approach to MPPT control in WECS. [ABSTRACT FROM AUTHOR]

Objectives: Managing multimorbidity as aging stroke patients is complex; standard self-management programs necessitate adaptations. We used visual analytics to examine complex relationships among aging stroke survivors' comorbidities. These findings informed pre-adaptation of a component of the Chronic Disease Self-Management Program. Methods: Secondary analysis of 2013–2014 Medicare claims with stroke as an index condition, hospital readmission within 90 days (n = 42,938), and 72 comorbidities. Visual analytics identified patient subgroups and co-occurring comorbidities. Guided by the framework for reporting adaptations and modifications to evidence-based interventions, an interdisciplinary team developed vignettes that highlighted multimorbidity to customize the self-management program. Results: There were five significant subgroups (z = 6.19, p <.001) of comorbidities such as obesity and cancer. We constructed 6 vignettes based on the 5 subgroups. Discussion: Aging stroke patients often face substantial disease-management hurdles. We used visual analytics to inform pre-adaptation of a self-management program to fit the needs of older adult stroke survivors. [ABSTRACT FROM AUTHOR]

Background: The substantial growth in gamification research has connected gamified learning to enhanced engagement, improved performance, and greater motivation. Similar to gamification, personalized learning analytics dashboards can enhance student engagement. Objectives: This study explores the student experiences and academic achievements using a gamified dashboard in a large, introductory STEM course. Methods: We examined two groups of students enrolled in different sections of a one‐semester‐long physical geology course with a total enrollment of 223 students. The only difference between the groups was that one had access to the dashboard. The data collection included students' assignments, overall performances, and exam scores. Students in both sections completed a Science Literacy Concept Inventory survey at the beginning and end of the term. Additionally, students completed an end‐of‐term survey containing open‐ended questions on their experience and interactions with specific elements. Results: Students shared mostly positive comments about their experience with the dashboard, and the final grade of students with access to the dashboard was 13% higher, on average, compared to their peers in the non‐dashboard section. Conclusion: With low costs and little time invested, gamified dashboards could have a significant impact on student performance in large STEM lecture courses. Lay Description: What is already known about this topic: Leaner dashboards that provide personalized feedback are linked to improved student performance in undergraduate STEM courses. However, students may be reticent to adopt dashboards, especially students in the middle range of the performance distribution, for whom the impact of the dashboard may be most significant.Prior research on gamification in STEM courses suggests that adding gameful elements like progress trackers, badges, and rewards can increase students' engagement in undergraduate coursework.The combination of personalized learning in dashboards and the motivational experience of gamification should boost student engagement, dashboard adoption, and ultimately foster academic achievement. What this paper adds: In this paper, we examine the differences in academic performance between students with and without access to a gamified learning dashboard in an undergraduate Geology course.We observe that students with access to the dashboard (the treatment group), outperform students without access (the control group). The greatest benefit is observed for students who use the dashboard more frequently.Students reported that the progress tracker, the badges, and the rewards all incentivized their use and provided useful feedback about their performance. Students who did not adopt the dashboard expressed a need for more detail about the tool and its purpose. Implications for practice and/or policy: Instructors and instructional designers for large enrollment undergraduate STEM courses should consider the affordances of gamified learner dashboards for increasing engagement and for providing synchronous feedback about learners' strategies in the course.Aligning the dashboard to the content of the curriculum—by ensuring that badges reflect key concepts‐ encouraged participation and helped students identify the utility of the tool. Dashboards should be personalized to individuals and to the course.Adding gameful elements in a low‐cost intervention for increasing adoption and engagement of dashboards in large enrollment introductory courses. [ABSTRACT FROM AUTHOR]

Healthcare providers often encounter clinical trial results in the form of visual data displays. Although there is a robust literature on patient responses to data displays in medical settings, less is known about how providers comprehend and apply this information. Our study provides a scoping review of the literature on providers' reactions to and perceptions of data displays. We searched article databases (PubMed, PsycINFO, Web of Science, Cumulative Index to Nursing and Allied Health Literature, the Cochrane Library) supplemented by handsearching. Eligible articles were published in English from 1990 to 2020. We identified 15 articles meeting our criteria. Studies with physicians were more prevalent (13/15) than those with other healthcare providers (6/15). Commonly assessed outcomes included objective (10/15) and subjective comprehension (4/15), preference for certain data display formats (6/15), and hypothetical decision-making around prescribing (4/15). In studies that assessed comprehension of clinical trial concepts, scores were average or below what would be considered mastery of the information. Data display formats that were preferred did not always correlate with better comprehension of information; lesser preferred formats (e.g. icon array) often resulted in better comprehension. Our findings suggest that healthcare providers may not accurately interpret complex types of data displays, and it is unknown if such limitations affect actual decision-making. Interventions are needed to enhance comprehension of complex data displays within the context of prescription drug professional promotion. [ABSTRACT FROM AUTHOR]

Maritime safety is important for all stakeholders. On the other hand, maritime accidents occur despite rapid advances in technology. One of the most important aspects necessary to realise safety at sea is the safety of navigation. Navigating high-speed craft (HSC) is a more challenging and risky task than other types of ship navigation. A HSC navigator with insufficient safety culture (SC) may lead to wrong decisions in challenging physiological and psychological conditions. In this study, an analysis of HSC navigators' SC in terms of bridge operations has been carried out. Nordic Occupational Safety Climate Questionnaire (NOSACQ-50) and pairwise comparison of the effects of Electronic Chart Display and Information System (ECDIS), Automatic Radar Plotting Aid (ARPA), Automatic Identification System (AIS) and autopilot on SC have been applied to 38 Turkish HSC navigators. Navigation operations according to SC, factors that mostly influence SC and suggestions that will improve SC have been identified and discussed in accordance with navigators' perceptions. The results show that the overall average level of HSC navigators' SC is low. Therefore, considerations are introduced to improve SC in HSCs. [ABSTRACT FROM AUTHOR]

Urban excavation is an indispensable process for many construction activities such as road paving, house building, and pipe rehabilitation. However, the everincreasing complexity of underground utilities (e.g., water mains, gas lines, and sewage pipes) in urban environments challenges the safety of urban excavation, posing tremendous risks of potential collision and damage accidents. By obtaining real-time excavation information and high-fidelity simulation to evaluate safety risks, digital twin (DT) has an unexplored potential to improve urban excavation safety (UES). This research aims to investigate how a DT for urban excavation can be developed and used to improve UES. First, a multisensory solution is proposed to equip the physical excavators with the capability to precisely estimate their three-dimensional (3D) poses based on the kinematic model and social spider algorithm (SSA). Second, a building information model (BIM) of buried utilities and a 3D model of the excavators are integrated to form a dynamic virtual model that mirrors the actual excavation process. Third, based on the physical-virtual coupling DT, a real-time safety control method is proposed to proactively monitor urban excavation, dynamically assess collision risk, and timely warn against unsafe behaviors. A system prototype was developed and applied in a case study in Shandong, China. Results show that the system can precisely twin the pose of the excavator, increasing the estimation accuracy of the translation by at least 4.0 cm. The system can display the dynamic spatial position of the excavator and the buried pipes in 3D and automatically guide the excavator to operate safely in real-time, thereby avoiding potential collision accidents. [ABSTRACT FROM AUTHOR]

The monitoring performance of the photovoltaic system in real time is required for estimation and optimization purposes. This monitoring system has been the subject of extensive research, but in general it employs costly commercial software and as well as other license-based software. This paper discusses the design of a photovoltaic parameter monitoring system that uses Internet of Things technology to monitor in real time. This software is intended to be as interactive as possible in order to display all measurement data in the form of graphical according to a user-specified time interval. The constructed system is tested to display the measurement parameters of the fixed and dual axis solar tracker. The test results indicate that the system can display data in real time. Every data shown is accessible from any location and at any time, so long as the device being used is connected to the Internet. This system obviously can be applied and developed for an internet of thing-based photovoltaic parameter monitoring system to facilitate system estimation and optimization. [ABSTRACT FROM AUTHOR]

(1) Background: Changes in blink parameters have been found to influence ocular surface exposure, eliciting symptoms of dry eye and ocular signs. The aim of the study was to highlight the relevance of including blink regularity as a new parameter to fully characterize blinking; (2) Methods: A novel characterization of blink parameters is described, including spontaneous eyeblink rate (SEBR), percentage of incomplete blinks, and blink regularity. A pilot study was designed in which tear film break-up time (TFBUT), blink parameters, and the time percentage of ocular surface exposure were determined in eight subjects (52.0 ± 16.6 years, 4 females) in three experimental conditions (baseline, reading a hard-copy text, and reading from an electronic display). Blink parameters were monitored through asynchronous image analysis of one minute video segments; (3) Results: All blink parameters were influenced by experimental conditions. A trend was observed in which both reading tasks resulted in an increase in ocular surface exposure, mainly related to a combination of reduced SEBR, increased percentage of incomplete blinks, and loss of blink regularity; (4) Conclusions: A complete characterization of blink parameters is relevant to better understand ocular dryness related to surface exposure and to advice patients towards a reeducation of their blinking habits. [ABSTRACT FROM AUTHOR]

Background: The term "Telemedicine" is being used in the medical and health sector to treat patients and to provide medical guidance remotely. The intellectual output from India in terms of publications was harvested from Scopus® with the keyword "Telemedicine" and analyzed by using bibliometric techniques. Methods: The source data was downloaded from the Scopus® database. All the publications on telemedicine and indexed in the database up to the year 2021 were considered for scientometric analysis. The software tools VOSviewer® version 1.6.18 to visualize bibliometric networks, statistical software R Studio® version 3.6.1 with the Bibliometrix package Biblioshiny® were used for analysis and data visualization, and EdrawMind® was used for mind mapping. Result: India contributed 2,391 (4.32%) publications on telemedicine to a total of 55,304 publications worldwide until 2021. There were 886 (37.05%) papers that appeared in open access mode. The analysis revealed that the first paper was published in the year 1995 from India. Steep growth in the number of publications was observed in 2020 with 458 publications. The highest, 54 research publications, appeared in the "Journal of Medical Systems." The All India Institute of Medical Sciences (AIIMS), New Delhi, contributed the highest number of publications (n = 134). A considerable overseas collaboration was observed (USA: 11%; UK: 5.85%). Conclusions: This is the first such attempt to address the intellectual output of India in the emerging medical discipline of telemedicine and has yielded useful information such as leading authors, institutions, their impact, and year-wise topic trends. [ABSTRACT FROM AUTHOR]

Before the start of the COVID-19 pandemic, the College's Hirons Library & Learning Center (HLLC) library marketing efforts included word of mouth, information literacy instruction session, physical and electronic displays, and announcement on the library webpage to library users. In March 2020, due to the COVID-19 pandemic, the HLLC, in collaboration with the Office of Institutional Research & Training (OIRT), designed two new library marketing campaigns using the project management app, Notion. Both campaigns were designed to meet the new and changing needs of our new, predominately remote, users. In the first library marketing campaign, the HLLC's marketing goal was very focused and deliberate in purpose. The library emailed the College community messages to increase awareness and usage of the library's eBook collections. In the second library marketing campaign, the library broadened the purpose of the marketing campaigned to promote online resources, tools, and virtual programs. The library sent text messages to the students. In this edition of the column, we describe how our marketing efforts have changed due to the pandemic, including which strategies we employed, and the extent to which we recognized success with these new efforts. [ABSTRACT FROM AUTHOR]

Multiplexing technologies can be used as a platform for low-cost, high-performance, and large-capacity holographic displays and data storage systems. In this paper, a polarization multiplexed method is proposed to realize two different information channels under orthogonally linear-polarized incidences utilizing the coding metasurface. Based on the modified weighted Gerchberg–Saxton (GSW) algorithm, a two-bit coding metasurface is designed with a set of double-layer cross-type meta-atoms to encode the holographic phase information, which can reflect two independent holographic images with respect to different incident polarization. The experimental results agree well with the numerical simulations and the theoretical predictions, which make the proposed multiplexed two-bit coding meta-hologram a great potential in numerous applications such as data storage and information processing. [ABSTRACT FROM AUTHOR]

Phosphate tungsten and molybenum bronzes represent an outstanding class of materials displaying textbook examples of charge‐density‐wave (CDW) physics among other fundamental properties. Here we report on the existence of a novel structural branch with the general formula [Ba(PO4)2][WmO3m−3] (m=3, 4 and 5) denominated ′layered monophosphate tungsten bronzes′ (L‐MPTB). It results from thick [Ba(PO4)2]4− spacer layers disrupting the cationic metal‐oxide 2D units and enforcing an overall trigonal structure. Their symmetries are preserved down to 1.8 K and the compounds show metallic behaviour with no clear anomaly as a function of temperature. However, their electronic structure displays the characteristic Fermi surface of previous bronzes derived from 5d W states with hidden nesting properties. By analogy with previous bronzes, such a Fermi surface should result into CDW order. Evidence of CDW order was only indirectly observed in the low‐temperature specific heat, giving an exotic context at the crossover between stable 2D metals and CDW order. [ABSTRACT FROM AUTHOR]

Phosphate tungsten and molybenum bronzes represent an outstanding class of materials displaying textbook examples of charge‐density‐wave (CDW) physics among other fundamental properties. Here we report on the existence of a novel structural branch with the general formula [Ba(PO4)2][WmO3m−3] (m=3, 4 and 5) denominated ′layered monophosphate tungsten bronzes′ (L‐MPTB). It results from thick [Ba(PO4)2]4− spacer layers disrupting the cationic metal‐oxide 2D units and enforcing an overall trigonal structure. Their symmetries are preserved down to 1.8 K and the compounds show metallic behaviour with no clear anomaly as a function of temperature. However, their electronic structure displays the characteristic Fermi surface of previous bronzes derived from 5d W states with hidden nesting properties. By analogy with previous bronzes, such a Fermi surface should result into CDW order. Evidence of CDW order was only indirectly observed in the low‐temperature specific heat, giving an exotic context at the crossover between stable 2D metals and CDW order. [ABSTRACT FROM AUTHOR]

Designing photochromic systems with information displays has been seldom studied but is critical to the realization of instant hand-writable system. Previous instant hand-writable systems with inorganic photochromic materials limited to low color contrast. Herein, by controlling the sintering environment and ion doping concentration, an excellent light response is achieved by engineering the formation of oxygen vacancy defects in Ba 3 MgSi 2 O 8 :0.25%Dy3+, the maximum color contrast as high as 80.7%. A hand-rewritable system fabricated using these photochromic materials exhibits excellent writing and erasing reversibility in response to UV illumination and thermal stimulus. In addition, a large luminescence modulation of 86.2% is achieved due to the well overlap between the emission peak of Dy3+ and the absorption peak of Ba 3 MgSi 2 O 8. The resulting insights will be useful to researchers in inducing oxygen vacancy defects in high-performance inorganic photochromic systems for superior functional design. [ABSTRACT FROM AUTHOR]

Sr 2 Si 5 N 8 :Eu2+ (258) phosphor has attracted much attention due to its excellent red emission properties. However, its poor thermal stability hinders its further development in electronic display devices. Therefore, it is important to solve this problem in order to produce stable and long life-time WLED devices. In this work, a 258 phosphor was synthesized by a simple solid-phase reaction method, which was then coated by an ultrathin carbon layer by chemical vapor deposition. The carbon-coated powders were further annealed in N 2 atmosphere at a high temperature to trigger the carbothermal reaction. On the one hand, the carbothermal reaction resulted in the removal of oxygen in the phosphor particle by a part of the carbon on the surface, which reduced the oxidation of both the luminescent centers and the host lattice. On the other hand, the remaining carbon crystallized, forming a graphene-like multilayer that protected the phosphor particle from the penetration of the external oxygen. This eventually resulted in a significant improvement of the thermal stability and oxidation resistance of the phosphor. [ABSTRACT FROM AUTHOR]

Self-healing is a bioinspired strategy to repair damaged conductors under repetitive wear and tear, thereby largely extending the life span of electronic devices. The self-healing process often demands external triggering conditions as the practical challenges for the widespread applications. Here, a compliant conductor with electrically self-healing capability is introduced by combining ultrahigh sensitivity to minor damages and reliable recovery from ultrahigh tensile deformations. Conductive features are created in a scalable and low-cost fabrication process comprising a copper layer on top of liquid metal microcapsules. The efficient rupture of microcapsules is triggered by structural damages in the copper layer under stress conditions as a result of the strong interfacial interactions. The liquid metal is selectively filled into the damaged site for the instantaneous restoration of the metallic conductivity. The unique healing mechanism is responsive to various structural degradations including microcracks under bending conditions and severe fractures upon large stretching. The compliant conductor demonstrates high conductivity of ~12,000 S/cm, ultrahigh stretchability of up to 1,200% strain, an ultralow threshold to activate the healing actions, instantaneous electrical recovery in microseconds, and exceptional electromechanical durability. Successful implementations in a light emitting diode (LED) matrix display and a multifunctional electronic patch demonstrate the practical suitability of the electrically self-healing conductor in flexible and stretchable electronics. The developments provide a promising approach to improving the self-healing capability of compliant conductors. [ABSTRACT FROM AUTHOR]

Background: Considering the evident risk in the literature between the use of screen devices and sleep, there are still few studies on the relationship between each electronic screen device, media programs and sleep duration and sleep-related problems among adolescents and which variables interfere in these relationships. Therefore, this study has the following objectives: (1) to determine which are the most common electronic display devices related to sleep time and outcomes and (2) to determine which are the most common social network applications, such as Instagram and WhatsApp, associated with sleep outcomes. Methods: This was a cross-sectional study with 1101 Spanish adolescents between 12 and 17 years old. Age, sex, sleep, psychosocial health, adherence to the Mediterranean diet (MD), sport practice, and time spent on screen devices were assessed by an ad hoc questionnaire. Linear regression analyses were applied, adjusting for several covariables. Poisson regression was applied between the sexes. A p value < 0.05 was considered statistically significant. Results: Cell phone use was more associated with sleep time (13%). In boys, time spent on cell phones (prevalence ratio [PR] = 1.09; p < 0.001) and videogames (PR = 1.08; p = 0.005) had a higher prevalence ratio. When psychosocial health was included in the models, we found the greatest association (Model 2: PR = 1.15; p = 0.007). For girls, time spent on the cell phone was significantly associated with sleep-related problems (PR = 1.12; p < 0.001), and adherence to the MD became the second most important in the model (PR = 1.35; p < 0.001), followed by psychosocial health and cell phone use (PR = 1.24; p = 0.007). Time spent on WhatsApp was associated with sleep-related problems only among girls (PR = 1.31; p = 0.001) and was the most important variable in the model along with MD (PR = 1.26; p = 0.005) and psychosocial health (PR = 1.41; p < 0.001). Conclusions: Our results suggest a relationship between cell phones, video games, and social networks with sleep-related problems and time. [ABSTRACT FROM AUTHOR]

A hydrographic survey is a standardized procedure for collecting data for the production of nautical charts and publications. It is a lengthy and costly procedure, so the survey is carried out depending on the capabilities of hydrographic organizations. It is known that relatively large parts of the world’s oceans are very poorly covered by hydrographic surveys. To increase the amount of data collected, the International Hydrographic Organization (IHO) has introduced the concept of crowdsourced bathymetry (CSB). Under the CSB concept, all vessels meeting certain minimum technical requirements (carrying a global navigation satellite system and a single beam echo sounder) can participate in voluntary bathymetric data collection. The paper analyzes the method of collecting bathymetric data from CSB. The depth data collected as part of the CSB are compared with official data displayed on electronic navigational charts (ENC) in the United States of America. Four sea areas were selected in which 104 depths were compared at the same positions, and categorization was also made according to the criterion of navigational importance, i.e., the category zones of confidence (CATZOC). By comparing the official depth data from the hydrographic survey with the depth data collected from public sources for the same positions, their mutual relationships were established, from which it can be concluded that the CSB data, despite its limitations, is a very valuable supplement to the existing official data. [ABSTRACT FROM AUTHOR]

Applied behavior analysts have traditionally relied on visual analysis of graphic data displays to determine the extent of functional relations between variables and guide treatment implementation. The present study assessed the influence of graph type on behavior analysts' (n = 51) ratings of trend magnitude, treatment decisions based on changes in trend, and their confidence in decision making. Participants examined simulated data presented on linear graphs featuring equal-interval scales as well as graphs with ratio scales (i.e., multiply/divide or logarithmic vertical axis) and numeric indicators of celeration. Standard rules for interpreting trends using each display accompanied the assessment items. Results suggested participants maintained significantly higher levels of agreement on evaluations of trend magnitude and treatment decisions and reported higher levels of confidence in making decisions when using ratio graphs. Furthermore, decision making occurred most efficiently with ratio charts and a celeration value. The findings have implications for research and practice. [ABSTRACT FROM AUTHOR]

Many optical systems for displaying digital information on mirrors have been proposed, but information can only be displayed in either mirrored or real space and cannot move back and forth between the two. We have therefore developed a new optical system called mirror-transcending aerial imaging (MiTAi) that freely crosses the boundary between mirrored and real spaces. MiTAi is based on an existing aerial-imaging system consisting of a retroreflector, a beam splitter, and a moving display. MiTAi is designed as a spacesaving design by changing the orientation and position of the moving display as the light source. We implemented a prototype MiTAi to evaluate the luminance of the displayed aerial images and found that the aerial image formed by the prototype is able to move freely between both mirrored and real spaces. Moreover, the luminance of the image is not significantly lower than that formed by the existing aerial-imaging system. MiTAi will enable the creation of a new user experience by integrating smart mirrors and real-space aerial images. [ABSTRACT FROM AUTHOR]