Search

The integration of efficient, miniaturized group IV lasers into CMOS architecture holds the key to the realization of fully functional photonic-integrated circuits. Despite several years of progress, however, all group IV lasers reported to date exhibit impractically high thresholds owing to their unfavorable bandstructures. Highly strained germanium with its fundamentally altered bandstructure has emerged as a potential low-threshold gain medium, but there has yet to be any successful demonstration of lasing from this seemingly promising material system. Here, we demonstrate a low-threshold, compact group IV laser that employs germanium nanowire under a 1.6% uniaxial tensile strain as the gain medium. The amplified material gain in strained germanium can sufficiently surmount optical losses at 83 K, thus allowing the first observation of multimode lasing with an optical pumping threshold density of ~3.0 kW cm^-^2. Our demonstration opens up a new horizon of group IV lasers for photonic-integrated circuits., Comment: 31 pages, 9 figures

In this work, we demonstrate the correspondence between first principle calculations and experimental measurements of size effects on thermal transport in SiGe alloys. Transient thermal grating (TTG) is used to measure the effective thermal conductivity. The virtual crystal approximation under the density functional theory (DFT) framework combined with impurity scattering is used to determine the phonon properties for the exact alloy composition of the measured samples. With these properties, classical size effects are calculated for the experimental geometry of reflection mode TTG using the recently-developed variational solution to the phonon Boltzmann transport equation (BTE), which is verified against established Monte Carlo simulations. We find agreement between theoretical predictions and experimental measurements in the reduction of thermal conductivity (as much as $\sim$ 25\% of the bulk value) across grating periods spanning one order of magnitude. This work provides a framework for the tabletop study of size effects on thermal transport.

Superlattices are promising low-dimensional nanomaterials for thermoelectric technology that is capable of directly converting low-grade heat energy to useful electrical power. In this work, the thermal conductivities of GaAs/Ge superlattice nanostructures were investigated systematically in relation to their morphologies and interfaces. Thermal conductivities were measured using ultrafast time-domain thermoreflectance and were found to decrease with increasing interface densities, consistent with our understanding of microscopic phonon transport in the particle regime. Lower thermal conductivities were observed in (GaAs)0.77(Ge2)0.23 alloys; transmission electron microscopy study reveals phase separation in the alloys. These alloys can be interpreted as fine nanostructures, with length scales comparable to the periods of very thin superlattices. Our experimental findings help gain fundamental insight into nanoscale thermal transport in superlattices and are also useful for future improvement of thermoelectric performance using superlattice nanostructures., Comment: 11 pages, 5 figures

In this letter we report the preliminary validation of a low-cost paradigm for photovoltaic power generation that utilizes a prismatic Fresnel-like lens to simultaneously concentrate and separate sunlight into continuous laterally spaced spectral bands, which are then fed into spectrally matched single-junction photovoltaic cells. A prismatic lens was designed using geometric optics and the dispersive properties of the employed material, and its performance was simulated with a ray- tracing software. After device optimization, it was fabricated by injection molding, suitable for large-scale mass production. We report an average optical transmittance of ~ 90% over the VNIR range with spectral separation in excellent agreement with our simulations. Finally, two prototype systems were tested: one with GaAsP and c-Si photovoltaic devices and one with a pair of copper indium gallium selenide based solar cells. The systems demonstrated an increase in peak electrical power output of 51% and 64% respectively under white light illumination. Given the ease of manufacturability of the proposed device, the reported spectral splitting approach provides a cost- effective alternative to multi-junction solar cells for efficient light-to-electricity conversion ready for mass production., Comment: 6 pages, 4 figures

Tunnel field effect transistors (TFETs) utilizing semiconductor heterojunctions have shown promise for low energy logic but presently do not display subthreshold swings steeper than the room-temperature thermal limit of 60 mV/decade. These devices also show a pronounced temperature dependence that is not characteristic of a tunneling process. Herein, we explore these aspects by studying the temperature dependence of two-terminal InAs/GaSb heterojunctions, allowing for the true nature of tunneling at the interface to be seen without convolution from other three-terminal parasitic effects such as gate oxide traps. We compare the temperature dependence of peak current, excess current, and conductance slope for InAs/GaSb interfaces with and without interface defects. We identify that the tunnel and excess currents depend on temperature and defect density and propose that the ultimate leakage current in TFETs based on these materials will be affected by defects and inhomogeneity at the interface. We determine that the conductance slope, a two-terminal analog to subthreshold slope, does not depend on temperature, contrasting sharply with the heavy temperature dependence seen in three terminal devices in literature. We propose that TFETs based on this and similar materials systems are dominated by parasitic effects such as tunneling into oxide trap states, or other parasitics that are not intrinsic to the heterojunction itself, and that in the absence of these effects, the true steepness from band-to-band tunneling is limited by defects and inhomogeneity at the interface.

InAs/GaSb and similar materials systems have generated great interest as a heterojunction for tunnel field effect transistors (TFETs) due to favorable band alignment. However, little is currently understood about how such TFETs are affected by materials defects and nonidealities. We present measurements of the conductance slope for various InAs/GaSb heterojunctions via two-terminal electrical measurements, which removes three-terminal parasitics and enables direct study on the effect of microstructure on tunnelling. Using this, we can predict how subthreshold swings in TFETs can depend on microstructure. We also demonstrate growth and electrical characterization for structures grown by metalorganic chemical vapor deposition (MOCVD) - a generally more scalable process compared to molecular beam epitaxy (MBE). We determine that misfit dislocations and point defects near the interface can lead to energy states in the band-gap and local band bending that result in trap-assisted leakage routes and nonuniform band alignment across the junction area that lower the steepness of the conductance slope. Despite the small lattice mismatch, misfit dislocations still form in InAs on GaSb due to relaxation as a result of large strain from intermixed compositions. This can be circumvented by growing GaSb on InAs, straining the GaSb underlayer, or lowering the InAs growth temperature in the region of the interface. The conductance slope can also be improved by annealing the samples at higher temperatures, which we believe acts to annihilate point defects and average out major fluctuations in band alignment across the interface. Using a combination of these techniques, we can greatly improve the steepness of the conductance slope which could result in steeper subthreshold swings in TFETs in the future.

We have measured the lifetimes of two zone-center longitudinal acoustic phonon modes, at 320 GHz and 640 GHz respectively, in a 14 nm GaAs / 2 nm AlAs superlattice structure. By comparing measurements at 296 K and 79 K we separate the intrinsic contribution to phonon lifetime determined by phonon-phonon scattering from the extrinsic contribution due to defects and interface roughness. At 296 K, the 320-GHz phonon lifetime has approximately equal contributions from intrinsic and extrinsic scattering, whilst at 640 GHz it is dominated by extrinsic effects. These measurements are compared with first-principles lattice dynamics calculations of intrinsic and extrinsic scattering rates in the superlattice. The calculated room-temperature intrinsic lifetime of longitudinal phonons at 320 GHz is in agreement with the experimentally measured value of 0.9 ns. The model correctly predicts the transition from predominantly intrinsic to predominantly extrinsic scattering; however the predicted transition occurs at higher frequencies. Our analysis indicates that the 'interfacial atomic disorder' model is not entirely adequate and that the observed frequency dependence of the extrinsic scattering rate is likely to be determined by a finite correlation length of interface roughness., Comment: 21 pages, 5 figures

We measure the lifetime of the zone-center 340 GHz longitudinal phonon mode in a GaAs-AlAs superlattice excited and probed with femtosecond laser pulses. By comparing measurements conducted at room temperature and liquid nitrogen temperature we separate the intrinsic (phonon-phonon scattering) and extrinsic contributions to phonon relaxation. The estimated room temperature intrinsic lifetime of 0.95 ns is compared to available calculations and experimental data for bulk GaAs. We conclude that ~0.3 THz phonons are in the transition zone between Akhiezer and Landau-Rumer regimes of phonon-phonon relaxation at room temperature.

The methodology for a heterodyned laser-induced transient thermal grating technique for non-contact, non-destructive measurements of thermal transport in opaque material is presented. Phase-controlled heterodyne detection allows us to isolate pure phase or amplitude transient grating signal contributions by varying the relative phase between reference and probe beams. The phase grating signal includes components associated with both transient reflectivity and surface displacement whereas the amplitude grating contribution is governed by transient reflectivity alone. By analyzing the latter with the two-dimensional thermal diffusion model, we extract the in-plane thermal diffusivity of the sample. Measurements on a 5 {\mu}m thick single crystal PbTe film yielded excellent agreement with the model over a range of grating periods from 1.6 to 2.8 {\mu}m. The measured thermal diffusivity of 1.3 \times 10-6 m2/s was found to be slightly lower than the bulk value., Comment: 19 pages, 6 figures