Search

Summary: Oslo in Norway has had the highest incidence of hip fractures in the world. The incidence in Oslo has been thoroughly described every decade since the late 1970s. The incidence in Oslo has previously been higher compared to the rest of Norway but has now decreased to a level below the country average. Purpose: The purpose of this study was to report the incidence of hip fractures in Oslo in 2019 and compare it with the incidence rates from the previous four decades. Methods: Patients residing in Oslo in 2019 with a new hip fracture identified by searching the Oslo hospital's patient administrative systems and protocols from the operating theaters. The diagnosis was verified through medical records and/or radiographs. To compare with previous studies, the direct standardization method was used with the population of Oslo in 2019 as the standard. Results: A total of 758 hip fractures, 70% women, were identified in 2019. The age-standardized incidence rates per 10,000 person-years in 2019 (95% CI) were 45 (41.1–48.8) for women and 30 (25.8–33.8) for men. In women, there has been a continuous decline in age-standardized rates the last three decades and in men the last two decades. The most pronounced decline was seen in the oldest age groups over 70 years. There has been a secular decline in both cervical and trochanteric fractures; however, the decrease in trochanteric fractures was most distinct for males, with more than two times higher risk in 1996/1997 compared to 2019. Conclusion: Incidence rates for hip fractures in Oslo in 2019 were the lowest rate reported since 1978. The decrease was significant for both men and women. For the first time, the incidence rates are below the national rates of Norway. However, the rates are still among the highest worldwide. [ABSTRACT FROM AUTHOR]

Background: Previous studies have reported that positive buttress is as effective as anatomical reduction in treating young femoral neck fractures, but whether this effect is related to the Pauwels classification remains unclear. The purpose of this study was to retrospectively analyze the clinical prognosis of positive buttress in young femoral neck fractures with different Pauwels classifications, as well as to assess its biomechanical properties. Methods: A total of 170 young patients with femoral neck fractures who were treated with three cannulated screws were included in this study. Patients were divided into three groups based on their preoperative Pauwels classification. Each group was divided into three subgroups based on the reduction quality: positive buttress, negative buttress and anatomical reduction. The femoral neck shortening, the incidence of necrosis of the femoral head (AVN) and the Harris hip scores at the last follow-up were compared across the three reduction quality within each Pauwels classification. Subsequently, a volunteer was recruited, CT data of the hip was obtained, and finite element models representing different reduction quality under varying Pauwels classifications were established. The biomechanical properties of each model were then evaluated following the application of strains. Results: In Pauwels type I, there were no significant differences in postoperative femoral neck shortening, incidence of AVN, or Harris score among the three types of reduction quality (P > 0.05). However, positive buttress provided superior biomechanical stability compared to negative buttress and anatomical reduction. In Pauwels type II, the incidence of AVN was similar between the positive buttress and the anatomical reduction groups, and both were significantly lower than that in the negative buttress (P < 0.05). The Harris score of the positive buttress was higher than that of the negative buttress, and there was no significant difference in the occurrence of femoral neck shortening between the three groups (P > 0.05). Finite element analysis showed that the biomechanical stability of positive buttress was equivalent to anatomical reduction, and both were better than negative buttress. In Pauwels type III, the incidence of AVN in the anatomical reduction group was lower than that in both the positive buttress and negative buttress (P < 0.05). There was no significant difference in the occurrence of AVN or femoral neck shortening between positive buttress and negative buttress (P > 0.05). There was also no difference in postoperative Harris scores between the three reduction qualities (P > 0.05). Both positive buttress and negative buttress exhibited identical biomechanical qualities and were inferior to anatomical reduction. Conclusions: The biomechanical and clinical dominance of positive buttress correlates with Pauwels type. Specifically, Positive buttress is biomechanically stable in Pauwels types I and II. In Pauwels type III, positive buttress is not advantageous. As the Pauwels angle increases, the biomechanical benefit of the positive buttress is lost. Therefore, regardless of the Pauwels classification, negative buttress should be avoided after reduction of femoral neck fractures in young patients. [ABSTRACT FROM AUTHOR]

AbstractPurposeMethodsResultsConclusionCurrently, treating femoral neck fractures (FNFs) with the inverted triangle configuration requires alignment between the femoral neck’s long axis and the axis of cannulated compression screws (CCS). To address whether the ‘parallel’ alignment is the most effective approach for fractures with varying Pauwels angles, we employed finite element analysis (FEA) to investigate how different angles between fracture line and CCS affect stability, based on various Pauwels angles. This study aims to offer improved guidance for treating FNFs with the inverted triangle configuration.FNF models with Pauwels angles of 40°, 50°, 60°, and 70° were developed. The CCS were positioned in an inverted triangle configuration based on the angle between the fracture line and CCS. Using FEA, we compared the biomechanical properties of each model to evaluate the stability by evaluating five key parameters: maximal stress in the proximal femoral fracture fragment (MPFS) and implants (MIS), maximal displacement of the bone (MBD) and implants (MID), and maximal relative displacement of the fragments (MRD).For Pauwels angles of 40°, 50°, 60°, and 70° across different FNF models, various parameters exhibited similar results. The MPFS showed an upward trend with a decrease in the angle, whereas the MIS, MBD, MID, and MRD all exhibited downward trends.The FEA results suggest that decreasing the angle between the fracture line and the CCS for the treatment of FNF can increase the tension resistance of the model, thus increasing the model’s stability. [ABSTRACT FROM AUTHOR]

OBJECTIVE: In pediatric patients, femoral neck fracture is a relatively rare injury with a high complication rate despite proper diagnosis and treatment. Fixation of femoral neck fractures is usually performed with screws placed along the neck axis. In this study, we aim to compare two different implants and methods in terms of biomechanics. MATERIALS AND METHODS: Twenty-eight right-left fresh femur bones of 6-month-old male Ovis aries lambs grown on the same farm were used. Bones were randomly divided into 4 groups (n=7). In group 1, the Delbet type III femoral neck fracture model was fixed with two 4.5 mm cannu-lated screws, one screw crossing the physis. In group 2, two 4.5 mm cannulated screws, which did not cross the physis, were used. In group 3, Delbet type III femoral neck fracture model was fixed with a 3.5 mm proximal femoral anatomical plate and five screws, one screw crossing the physis. Finally, in group 4, Delbet type III femoral neck fracture model was fixed with one 3.5 mm proximal femoral anatomical plate and five screws that did not exceed the physis. RESULTS: Biomechanical tests were performed using a Zwick/Roell AllroundLine 100 kN device. While axial failure burden (F = 6.819, p<.05, d = .46) and axial stiffness (F = 3.576, p<.05, d = .30) have been found to be significantly different between the independent treatment groups, axial failure displacement (F = .622, p>.05) and axial failure energy (F = .727, p>.05) have been found not to be significant between the independent groups. The effect sizes of the axial failure load and axial stiffness variables were 0.46 and 0.30, respectively, suggesting a moderate clinical effect. The highest axial failure load was recorded in group 3, while the smallest load was recorded in group 2. Similarly, the axial stiffness level in group 3 was statistically higher than the axial stiffness measurement recorded in group 2, p<.05. CONCLUSIONS: Consequently, we found that the biomechanical fixation success was the highest with a 3.5 mm proximal femoral anatomical plate, a 3.5 mm locking screw crossing the physis, and five 3.5 mm screws. [ABSTRACT FROM AUTHOR]

Background: The incidence of femoral neck fractures in older adults is increasing each year. Active and reasonable postoperative rehabilitation exercises can restore the activity of geriatric patients with femoral neck fractures to a great extent, while also avoiding bedridden complications and re-fractures. This study explores the perspectives, experiences, and recommendations of medical staff regarding the implementation status, existing problems, promoting factors, and hindering factors of post-surgical rehabilitation exercises for geriatric patients with femoral neck fractures. The ultimate goal is to further optimize rehabilitation exercise programs and to expedite this process for patients. Methods: A qualitative, descriptive phenomenological study was conducted. A total of 21 clinical medical staff were selected using the purposive sampling method for semi-structured interviews. A content analysis method was used to collate and analyze the collected interview data. Results: A total of 2 themes and 6 sub-themes were defined. The themes consisted of multiple obstacles occurring during the implementation of rehabilitation exercises and the scientific cognition of medical staff on these exercises. Respondents found that patient initiative during rehabilitation exercises was insufficient, that the comprehensiveness and continuity of exercises could not be guaranteed, and that unification between textbook theory and clinical practice was incomplete. Moreover, respondents believed that their professional quality should be excellent, but that staffing and organizational management required optimization, and that support was required for the implementation of rehabilitation exercises. Conclusion: This study investigated the opinions and experiences of medical staff during postoperative rehabilitation exercises in geriatric patients with femoral neck fractures. Collaborative efforts should fully engage hospitals, communities, and families, enhance the alignment of health education with patient needs, advance the scientific development of an integrated medical model by refining the curriculum and teaching system, and significantly elevate the level of medical science and technology. This study will serve as a valuable reference for the establishment of future professional, and personalized rehabilitation programs tailored for geriatric patients with femoral neck fractures. [ABSTRACT FROM AUTHOR]

Introduction: The dynamic hip screw (DHS) and cannulated compression screws (CCS) have been the two implants most frequently employed for the fixation of femoral neck fractures. The objective of this study is to compare clinical and radiographic outcomes between patients treated with the FNS and those treated with CCS. Material and methods: We conducted a retrospective analysis of a consecutive series of femoral neck fractures treated with FNS or CCS between May 2019 and June 2022. The study included 144 patients who met the inclusion criteria. Collected data encompassed age, sex, Garden fracture classification, Pauwels classification, duration of surgery, length of hospital stays, Harris Hip Score (HHS), complications, and injured side. Results: The FNS group comprised 70 patients, while the CCS group consisted of 74 patients. The operation time was 43.6 ± 12.09 min for the FNS group and 56.47 ± 22.42 min for the CCS group. At the end of the follow-up, the mean HHS was 87.07 ± 11.77 for the FNS group and 76.20 ± 13.64 for the CCS group. The mean reduction in hemoglobin levels from pre- to post-surgery was 1.05 mg/dl in the FNS group and 0.87 mg/dl in the CCS group. The reintervention rate was 8.1% for the CCS group and 2.85% for the FNS group. Conclusion: The FNS does not demonstrate superiority over CCS regarding femoral neck shortening, complication rate, and reduction in hemoglobin levels. However, FNS does appear superior to CCS in terms HHS, operation time, and reoperation rate. [ABSTRACT FROM AUTHOR]

Objective: Total hip arthroplasty (THA) remains the primary treatment option for femoral neck fractures in elderly patients. This study aims to explore the risk factors associated with allogeneic blood transfusion after surgery and to develop a dynamic prediction model to predict post‐operative blood transfusion requirements. This will provide more accurate guidance for perioperative humoral management and rational allocation of medical resources. Methods: We retrospectively analyzed data from 829 patients who underwent total hip arthroplasty for femoral neck fractures at three third‐class hospitals between January 2017 and August 2023. Patient data from one hospital were used for model development, whereas data from the other two hospitals were used for external validation. Logistic regression analysis was used to screen the characteristic subsets related to blood transfusion. Various machine learning algorithms, including logistic regression, SVA (support vector machine), K‐NN (k‐nearest neighbors), MLP (multilayer perceptron), naive Bayes, decision tree, random forest, and gradient boosting, were used to process the data and construct prediction models. A 10‐fold cross‐validation algorithm facilitated the comparison of the predictive performance of the models, resulting in the selection of the best‐performing model for the development of an open‐source computing program. Results: BMI (body mass index), surgical duration, IBL (intraoperative blood loss), anticoagulant history, utilization rate of tranexamic acid, Pre‐Hb, and Pre‐ALB were included in the model as well as independent risk factors. The average area under curve (AUC) values for each model were as follows: logistic regression (0.98); SVA (0.91); k‐NN (0.87) MLP, (0.96); naive Bayes (0.97); decision tree (0.87); random forest (0.96); and gradient boosting (0.97). A web calculator based on the best model is available at: (https://nomo99.shinyapps.io/dynnomapp/). Conclusion: Utilizing a computer algorithm, a prediction model with a high discrimination accuracy (AUC > 0.5) was developed. The logistic regression model demonstrated superior differentiation and reliability, thereby successfully passing external validation. The model's strong generalizability and applicability have significant implications for clinicians, aiding in the identification of patients at high risk for postoperative blood transfusion. [ABSTRACT FROM AUTHOR]

BACKGROUND: Irreducible femoral neck fracture was difficult to obtain anatomic reduction. As a new type of internal fixation, the femoral neck system is still blank for the treatment of non-anatomical reduced femoral neck fractures. OBJECTIVE: To explore the biomechanical stability of femoral neck system internal fixation under nonanatomical reduction in the treatment of femoral neck fractures based on finite element analysis. METHODS: CT data of the hip joint of a healthy female adult were obtained. Anatomical reduction of femoral neck fracture models with Pauwels angles of 30°, 50°, and 70° were established using Mimics 21.0, Geomagic Wrap 2021, and SolidWorks 2020. The fracture proximal ends of the three anatomical reduction models were shifted upward by 2 mm along the fracture line, and three positive buttress models with different Pauwels angles were obtained. In the same way, three negative buttress models were acquired by shifting downward by 2 mm. SolidWorks 2020 was used to make the femoral neck system internal fixation, and the nine femoral neck fracture models were assembled with the femoral neck system. Then Ansys 19.0 was used for finite element analysis. The displacement distribution and maximum displacement, stress distribution and maximum stress of the femur and femoral neck system were recorded under 2 100 N stress. RESULTS AND CONCLUSION: (1) When Pauwels angles were 30°, 50°, and 70°, the maximum stresses of the femoral neck system appeared to be concentrated at the junction of the sliding hip screw and anti-rotation screw. The maximum femur stresses appeared to be concentrated in the medial cortex of the femur. The maximum displacement was concentrated at the upper of the femoral head and femoral neck system. (2) When Pauwels angles were 30° and 50°, the maximum displacement and maximum stress of the femoral neck system and femur were: negative buttress > anatomical reduction > positive buttress. (3) When Pauwels angle was 70°, the maximum displacement and maximum stress of the femoral neck system were: negative buttress > anatomical reduction > positive buttress; the maximum displacement and maximum stress of the femur were: negative buttress > positive buttress > anatomical reduction. (4) With the increase of Pauwels angle, the biomechanical advantage of the positive buttress was weakening. However, it was better than a negative buttress. When Pauwels angle was 30°, positive buttress was more stable than anatomical reduction. When Pauwels angle was 50°, the biomechanical difference between positive buttress and anatomical reduction became smaller. When Pauwels angle was 70°, the stability of anatomical reduction was slightly better than positive buttress. (5) If it was difficult to achieve anatomical reduction of femoral neck fracture during operation, but the positive buttress had been displaced within 2 mm, the femoral neck system could be used to offer stable mechanical fixation. It is necessary to avoid negative buttress reduction. [ABSTRACT FROM AUTHOR]

BACKGROUND: With a gradually aging population, improving the ability to screen for the risk of death after arthroplasty and implementing timely personalized intervention programs for the increasing number of elderly patients with femoral neck fractures is key to improving the postoperative status of patients and prolonging survival expectations. OBJECTIVE: To investigate the risk factors for postoperative mortality in elderly patients with femoral neck fractures and to construct a nomogram predictive model to predict their mortality risk. METHODS: The study was conducted on 155 elderly patients (≥ 65 years old) who underwent arthroplasty for femoral neck fracture from January 2016 to January 2021, and 147 patients who met the inclusion criteria were analyzed to collect clinical data that may affect the patients’ postoperative mortality. Singlefactor and multi-factor Cox regression analyses were successively used to screen independent risk factors associated with postoperative mortality. The column line graph model was constructed and validated using Rstudio software. RESULTS AND CONCLUSION: (1) Age, frailty (age-adjusted Charlson comorbidities score), preoperative activity status, osteoporosis, and postoperative serum albumin level were five independent risk factors for postoperative mortality in elderly patients with femoral neck fractures (P < 0.05). (2) The nomogram predictive model was constructed based on the results of multifactorial analysis, with a consistency index of 0.819 (95%CI: 0.771-0.868). Receiver operating characteristic curve analysis showed that the area under curve for 1-year and 3-year survival prediction was 0.854 3 and 0.726 3, respectively, indicating that the nomogram predictive model has good discriminatory and predictive power; calibration curve and decision curve analysis also showed good model discriminative power and clinical utility value. (3) The constructed nomogram predictive model has good diagnostic efficacy and accuracy, and can effectively assess the risk of postoperative death of patients. [ABSTRACT FROM AUTHOR]

Background: To explore and compare the values of 3.0T magnetic resonance imaging (MRI) T2 mapping in evaluating the degree of acetabular cartilage degeneration in hip replacement surgery. Methods: A total of 26 elderly patients with femoral neck fractures who were scanned in 3.0T MRI T2 mapping quantification technique were included. Basing on MRI images, the degree of acetabular cartilage degeneration was classified into Grade 0, 1, 2, 3 and 4, according to the International Cartilage Repair Society (ICRS) scores. In addition, 8 healthy volunteers were included for control group. Results: By comparison with health population, T2 relaxation values in the anterior, superior, and posterior regions of acetabular cartilage in patients with femoral neck fracture were obviously increased (P < 0.001). Among the patients with femoral neck fractures, there were 16 hip joint with Grade 1–2 (mild degeneration subgroup) and 10 hip joints with Grade 3–4 (severe degeneration subgroup), accounting for 61.54% and 38.46%, respectively. Additionally, T2 relaxation values in the anterior and superior bands of articular cartilage were positively related to the MRI-based grading (P < 0.05); while there was no significant difference of T2 relaxation values in the posterior areas of articular cartilage between severe degeneration subgroup and mild degeneration subgroup (P > 0.05). Importantly, acetabular cartilage degeneration can be detected through signal changes of T2 mapping pseudo-color images. Conclusion: 3.0T MRI T2 mapping technology can be used to determine the degree of acetabular cartilage degeneration, which can effectively monitor the disease course. [ABSTRACT FROM AUTHOR]

Objective: We aimed to compare the clinical efficacy of inverted triangular cannulated compression screws combined with Gotfried positive or negative buttress reduction in the healing of femoral neck fractures. Methods: Between October 2017 and March 2021, 55 patients with femoral neck fractures underwent treatment using inverted triangular cannulated compression screws combined with Gotfried positive or negative buttress reduction. Among these patients, 29 received inverted triangular cannulated compression screws combined with Gotfried positive buttress reduction treatment. This group consisted of 16 males and 13 females, with an average age of 43.45 ± 8.23 years. Additionally, 26 patients received inverted triangular cannulated compression nails combined with Gotfried negative buttress reduction treatment. This group included 14 males and 12 females, with an average age of 41.96 ± 8.69 years. Postsurgery, various measurements were taken, including the degree of shortening of the femoral neck, degree of bone nonunion, degree of fixation failure, degree of ischemic necrosis of the femoral head, and Harris score of the hip joint. Results: All patients were followed up for a minimum of 18 months. The group that underwent treatment with an inverted triangular cannulated compression screw combined with Gotfried positive buttress reduction did not experience any cases of bone nonunion, fixation failure, or ischemic necrosis of the femoral head. In the group that received treatment with inverted triangle cannulated compression screws combined with Gotfried negative buttress reduction, there was one case of bone nonunion, three cases of early fixation failure, and one case of ischemic necrosis. Ultimately, five patients (19.23% of the total) underwent joint replacement surgery. The average shortening lengths in the vertical plane were 4.07 ± 1.98 mm and 8.08 ± 3.54 mm, respectively. In the horizontal plane, the average shortening lengths were 3.90 ± 1.57 mm and 7.77 ± 3.31 mm, respectively. At the last follow-up, the group that received Gotfried positive buttress reduction had a greater Harris hip joint score. Conclusion: The success rate of combining inverted triangular cannulated compression screws with Gotfried positive buttress reduction surgery is relatively high. This surgical approach effectively prevents femoral neck shortening and improves hip joint function. Moreover, it is crucial to avoid negative buttress reduction when managing femoral neck fractures. [ABSTRACT FROM AUTHOR]

The selection of implants for fixing unstable femoral neck fractures (FNF) remains contentious. This study employs finite element analysis to examine the biomechanics of treating Pauwels type III femoral neck fractures using cannulated compression screws (3CS), biplane double-supported screw fixation (BDSF), and the femoral neck system (FNS). A three-dimensional model of the proximal femur was developed using computed tomography scans. Fracture models of the femoral neck were created with 3CS, BDSF, and FNS fixations. Von Mises stress on the proximal femur, fracture ends, internal fixators, and model displacements were assessed and compared across the three fixation methods (3CS, BDSF, and FNS) during the heel strike of normal walking. The maximum Von Mises stress in the proximal fragment was significantly higher with 3CS fixation compared to BDSF and FNS fixations (120.45 MPa vs. 82.44 MPa and 84.54 MPa, respectively). Regarding Von Mises stress distribution at the fracture ends, the highest stress in the 3CS group was 57.32 MPa, while BDSF and FNS groups showed 51.39 MPa and 49.23 MPa, respectively. Concerning implant stress, the FNS model exhibited greater Von Mises stress compared to the 3CS and BDSF models (236.67 MPa vs. 134.86 MPa and 140.69 MPa, respectively). Moreover, BDSF displayed slightly lower total displacement than 3CS fixation (7.19 mm vs. 7.66 mm), but slightly higher displacement than FNS (7.19 mm vs. 7.03 mm). This study concludes that BDSF outperforms 3CS fixation in terms of biomechanical efficacy and demonstrates similar performance to the FNS approach. As a result, BDSF stands as a dependable alternative for treating Pauwels type III femoral neck fractures. [ABSTRACT FROM AUTHOR]

Purpose: Operative fixation of femoral neck fractures (FNFs) remains challenging. Complications are not infrequent, especially in displaced patterns. Numerous fixation techniques have been previously described in the literature; however, there remains a paucity of data regarding outcomes of these injuries treated with the femoral neck system (FNS). Methods: Patients with a displaced FNF (OTA/AO 31B) treated with the FNS at a single level 1 academic trauma center between 1/1/2019 and 1/1/2023 were identified. Radiographs were reviewed to assess fracture displacement, location, and characteristics. Patient records were further reviewed to assess for complications, reoperations, and osseous union. Results: Forty-three patients (65% male) with 44 FNFs were identified with a mean age of 35.0 years (range, 13–61 years). Two patients developed a deep infection requiring surgical debridement, four patients underwent a total hip arthroplasty, and one patient underwent a valgus intertrochanteric osteotomy for nonunion. There were three cases of femoral head AVN. Mean follow-up was 482.5 days among all patients, and 36 fractures had at least 6 months of follow-up or reached bony union. Conclusions: Here, we present a series of patients treated with the FNS for internal fixation and report a 18% reoperation rate. This is lower than the average rate that has been previously reported in similar patient populations in the literature treated with alternative methods of internal fixation. Thus, the FNS appears to be a safe and effective option for treatment of these injuries. [ABSTRACT FROM AUTHOR]

Objective: For elderly femoral neck fracture patients, anemia is one of the most common complications, increasing the risk of postoperative adverse events. Tranexamic acid (TXA) has been widely applied to the perioperative blood management. However, the optimal route of TXA administration in elderly femoral neck fracture remains unclear. The aim of this study is to evaluate the efficacy and safety of oral and intravenous (IV) application of TXA in elderly patients with femoral neck fracture undergoing total hip arthroplasty (THA) and hemiarthroplasty (HA). Methods: All elderly patients aged over 65 years old diagnosed with femoral neck fracture admitted to the trauma orthopedics from August 1, 2020 to February 28, 2022 were enrolled in this prospective cohort study. Participants were divided into three groups: oral group: TXA 2g orally 2 h before incision; IV group: intravenous infusion of TXA 1g 15 min before incision; and control group: usual hemostatic method. The primary outcomes were total blood loss, allogeneic transfusion rate, and postoperative thromboembolic events. SPSS 23.0 (IBM, Armonk, NY, USA) was used for statistical analysis, and p ≤ 0.05 was considered statistically significant. Results: A total of 100 patients were enrolled, including 32 cases in the oral group, 34 cases in the IV group and 34 cases in the control group. Compared with the control group, the total perioperative blood loss in the oral and IV groups was significantly decreased (763.92 ± 358.64 mL vs 744.62 ± 306.88 mL vs 1250.60 ± 563.37 mL, p = 0.048). No significant difference was identified between the oral and IV groups (p = 0.970). The rate of allogeneic transfusion was lower in the oral and IV groups than in the control group, but the difference had no statistical significant (6 vs 5 vs 12, p = 0.108), However, subgroup analysis showed that the IV and oral groups in patients who underwent THA have significant lower transfusion rate compared with the control group (1 vs 3 vs 7, p = 0.02). During 6 months follow‐up, no thromboembolic events were identified. Two patients (one from the oral group and one from the control group) died of respiratory failure. The cost of blood management from the oral group was significantly lower than IV (p < 0.001) and control groups (p = 0.009). Conclusion: Elderly patients with femoral neck fracture undergoing THA can benefit from both IV and oral administration of tranexamic acid. The results of these two administration routes are similar in safety and effectiveness. A similar tendency was observed in patients undergoing HA. Oral TXA is more cost–benefit compared with intravenous applications. [ABSTRACT FROM AUTHOR]

Purpose: To determine the effect of Huoxue Busui decoction plus hollow screw internal fixation in adolescent and middle-aged patients with fractures of the femoral neck. Methods: 56 patients receiving treatment for fracture with hollow screw internal fixation in the emergency rapid diagnosis and treatment channel of Dongying People's Hospital, China from April 2015 to January 2023 were randomly assigned to study and control groups. The two groups received hollow screw internal fixation and conventional drug therapy, but in addition, control group were given Huoxue Busui decoction 2 days after surgery. Visual analogue scale (VAS), hip efficacy score and hip flexor-extension range of motion pre- and post-operation were analyzed. Results: Preoperative VAS score and postoperative garden alignment index (GAI) of fracture reduction were comparable in the two groups. The VAS scores of control group at 5 days, 7 days, 1 month and 12 months after surgery were significantly lower than study group (p < 0.05). Fracture healing time was shorter in study group. At the last follow-up, there was no case of fracture non-union in control group. However, there were 2 cases of nail withdrawal and 1 case of femoral head necrosis. In contrast, study group had 1 instance of non-union, 3 instances of nail removal and 4 instances of femoral head necrosis. Conclusion: Huoxue Busui decoction combined with hollow screw internal fixation improved femoral neck fracture in young and middle-aged patients and promotes fracture healing after surgery and effectively improves joint function of patients. However, longer follow-up time, and in-depth study of the mechanism of action of this combination will be required. [ABSTRACT FROM AUTHOR]

In order to compare the biomechanical properties of four screws internal fixation for femoral neck fracture of Pauwels type Ⅰ, Ⅱ, Ⅲ:diamond and nonparallel screws, the clinical CT images were used to establish models of three kinds of different Pauwels types and two kinds of configuration models through three-dimensional virtual software( Minics, Solideworks, Geomagic) . Models were imported into software Ansys to assume material properties and load pressure. The maximum displacement, maximum stress and shear stress were observed. The biomechanical properties of diamond and nonparallel fixation with cannulated screws were different。 Among Pauwels Ⅰ fracture (20°), the max displacement were 0. 560 2 mm, 0. 561 0 mm, the max equivalent stresses were 23. 68 MPa, 24. 49 MPa, the max shear stresses were 3. 715 MPa, 4. 160 MPa. Among Pauwels Ⅱ fracture (40°),the max displacement were 0. 562 0 mm, 0. 565 3 mm, the max equivalent stresses were 24. 64 MPa, 25. 32 MPa, the max shear stresses were 4. 540 MPa, 5. 549 MPa. Among Pauwels Ⅲ fracture (60°), the max displacement were 0. 570 8 mm, 0. 572 3 mm,the max equivalent stresses were 25. 91 MPa, 26. 08 MPa,the max shear stresses were 6. 668 MPa, 7. 089 MPa. It is concluded the diamond configuration models has better stress dispersion effects, less displacement and shear stress conditions, better biomechanical stability under the same stress. [ABSTRACT FROM AUTHOR]

Abstract Background Previous studies have reported that positive buttress is as effective as anatomical reduction in treating young femoral neck fractures, but whether this effect is related to the Pauwels classification remains unclear. The purpose of this study was to retrospectively analyze the clinical prognosis of positive buttress in young femoral neck fractures with different Pauwels classifications, as well as to assess its biomechanical properties. Methods A total of 170 young patients with femoral neck fractures who were treated with three cannulated screws were included in this study. Patients were divided into three groups based on their preoperative Pauwels classification. Each group was divided into three subgroups based on the reduction quality: positive buttress, negative buttress and anatomical reduction. The femoral neck shortening, the incidence of necrosis of the femoral head (AVN) and the Harris hip scores at the last follow-up were compared across the three reduction quality within each Pauwels classification. Subsequently, a volunteer was recruited, CT data of the hip was obtained, and finite element models representing different reduction quality under varying Pauwels classifications were established. The biomechanical properties of each model were then evaluated following the application of strains. Results In Pauwels type I, there were no significant differences in postoperative femoral neck shortening, incidence of AVN, or Harris score among the three types of reduction quality (P > 0.05). However, positive buttress provided superior biomechanical stability compared to negative buttress and anatomical reduction. In Pauwels type II, the incidence of AVN was similar between the positive buttress and the anatomical reduction groups, and both were significantly lower than that in the negative buttress (P 0.05). Finite element analysis showed that the biomechanical stability of positive buttress was equivalent to anatomical reduction, and both were better than negative buttress. In Pauwels type III, the incidence of AVN in the anatomical reduction group was lower than that in both the positive buttress and negative buttress (P 0.05). There was also no difference in postoperative Harris scores between the three reduction qualities (P > 0.05). Both positive buttress and negative buttress exhibited identical biomechanical qualities and were inferior to anatomical reduction. Conclusions The biomechanical and clinical dominance of positive buttress correlates with Pauwels type. Specifically, Positive buttress is biomechanically stable in Pauwels types I and II. In Pauwels type III, positive buttress is not advantageous. As the Pauwels angle increases, the biomechanical benefit of the positive buttress is lost. Therefore, regardless of the Pauwels classification, negative buttress should be avoided after reduction of femoral neck fractures in young patients.

Abstract Background The incidence of femoral neck fractures in older adults is increasing each year. Active and reasonable postoperative rehabilitation exercises can restore the activity of geriatric patients with femoral neck fractures to a great extent, while also avoiding bedridden complications and re-fractures. This study explores the perspectives, experiences, and recommendations of medical staff regarding the implementation status, existing problems, promoting factors, and hindering factors of post-surgical rehabilitation exercises for geriatric patients with femoral neck fractures. The ultimate goal is to further optimize rehabilitation exercise programs and to expedite this process for patients. Methods A qualitative, descriptive phenomenological study was conducted. A total of 21 clinical medical staff were selected using the purposive sampling method for semi-structured interviews. A content analysis method was used to collate and analyze the collected interview data. Results A total of 2 themes and 6 sub-themes were defined. The themes consisted of multiple obstacles occurring during the implementation of rehabilitation exercises and the scientific cognition of medical staff on these exercises. Respondents found that patient initiative during rehabilitation exercises was insufficient, that the comprehensiveness and continuity of exercises could not be guaranteed, and that unification between textbook theory and clinical practice was incomplete. Moreover, respondents believed that their professional quality should be excellent, but that staffing and organizational management required optimization, and that support was required for the implementation of rehabilitation exercises. Conclusion This study investigated the opinions and experiences of medical staff during postoperative rehabilitation exercises in geriatric patients with femoral neck fractures. Collaborative efforts should fully engage hospitals, communities, and families, enhance the alignment of health education with patient needs, advance the scientific development of an integrated medical model by refining the curriculum and teaching system, and significantly elevate the level of medical science and technology. This study will serve as a valuable reference for the establishment of future professional, and personalized rehabilitation programs tailored for geriatric patients with femoral neck fractures.

Objective Total hip arthroplasty (THA) remains the primary treatment option for femoral neck fractures in elderly patients. This study aims to explore the risk factors associated with allogeneic blood transfusion after surgery and to develop a dynamic prediction model to predict post‐operative blood transfusion requirements. This will provide more accurate guidance for perioperative humoral management and rational allocation of medical resources. Methods We retrospectively analyzed data from 829 patients who underwent total hip arthroplasty for femoral neck fractures at three third‐class hospitals between January 2017 and August 2023. Patient data from one hospital were used for model development, whereas data from the other two hospitals were used for external validation. Logistic regression analysis was used to screen the characteristic subsets related to blood transfusion. Various machine learning algorithms, including logistic regression, SVA (support vector machine), K‐NN (k‐nearest neighbors), MLP (multilayer perceptron), naive Bayes, decision tree, random forest, and gradient boosting, were used to process the data and construct prediction models. A 10‐fold cross‐validation algorithm facilitated the comparison of the predictive performance of the models, resulting in the selection of the best‐performing model for the development of an open‐source computing program. Results BMI (body mass index), surgical duration, IBL (intraoperative blood loss), anticoagulant history, utilization rate of tranexamic acid, Pre‐Hb, and Pre‐ALB were included in the model as well as independent risk factors. The average area under curve (AUC) values for each model were as follows: logistic regression (0.98); SVA (0.91); k‐NN (0.87) MLP, (0.96); naive Bayes (0.97); decision tree (0.87); random forest (0.96); and gradient boosting (0.97). A web calculator based on the best model is available at: (https://nomo99.shinyapps.io/dynnomapp/). Conclusion Utilizing a computer algorithm, a prediction model with a high discrimination accuracy (AUC > 0.5) was developed. The logistic regression model demonstrated superior differentiation and reliability, thereby successfully passing external validation. The model's strong generalizability and applicability have significant implications for clinicians, aiding in the identification of patients at high risk for postoperative blood transfusion.

Abstract Introduction Femoral neck fractures have posed a significant global healthcare challenge and had notable impacts on the quality of life. Current treatment strategies for femoral neck fractures in young individuals have varied, emphasizing the need for optimal fixation methods. This study compared the clinical and radiological outcomes of the dynamic compression system (DCS) and multiple cancellous screws (MCS) methods. Methods This retrospective study included a total of 275 young adults with fresh femoral neck fractures treated with DCS and MCS. A matching analysis with a 1:1 ratio based on age, gender, fracture classification, and reduction quality was conducted. Demographic data were recorded, and comparisons were made according to follow-up time (FUT), hospitalization period, operation duration, femoral neck shortening, caput-collum-diaphysis (CCD) angle, Harris Hip Score (HHS), and post-operative complications. Results A total of 42 fractures were matched with a median age of 42 years (range, 22–48). In the DCS group, vertical neck shortening (median 1.92) was significantly lower than that in the MCS group (median 4.53) (P 0.05). There was no statistical difference in FUT, hospitalization period, operation time, and post-operative complications at the latest follow-up (P > 0.05). There were no complications such as pulmonary embolism, deep vein thrombosis, and incision infection reported. Conclusion DCS and MCS demonstrated effectiveness in treating femoral neck fractures in young adults. The DCS implant provides additional stability in the vertical axis. A prospective randomized controlled study with a large sample size was needed to validate these findings.

Abstract Objective We aimed to compare the clinical efficacy of inverted triangular cannulated compression screws combined with Gotfried positive or negative buttress reduction in the healing of femoral neck fractures. Methods Between October 2017 and March 2021, 55 patients with femoral neck fractures underwent treatment using inverted triangular cannulated compression screws combined with Gotfried positive or negative buttress reduction. Among these patients, 29 received inverted triangular cannulated compression screws combined with Gotfried positive buttress reduction treatment. This group consisted of 16 males and 13 females, with an average age of 43.45 ± 8.23 years. Additionally, 26 patients received inverted triangular cannulated compression nails combined with Gotfried negative buttress reduction treatment. This group included 14 males and 12 females, with an average age of 41.96 ± 8.69 years. Postsurgery, various measurements were taken, including the degree of shortening of the femoral neck, degree of bone nonunion, degree of fixation failure, degree of ischemic necrosis of the femoral head, and Harris score of the hip joint. Results All patients were followed up for a minimum of 18 months. The group that underwent treatment with an inverted triangular cannulated compression screw combined with Gotfried positive buttress reduction did not experience any cases of bone nonunion, fixation failure, or ischemic necrosis of the femoral head. In the group that received treatment with inverted triangle cannulated compression screws combined with Gotfried negative buttress reduction, there was one case of bone nonunion, three cases of early fixation failure, and one case of ischemic necrosis. Ultimately, five patients (19.23% of the total) underwent joint replacement surgery. The average shortening lengths in the vertical plane were 4.07 ± 1.98 mm and 8.08 ± 3.54 mm, respectively. In the horizontal plane, the average shortening lengths were 3.90 ± 1.57 mm and 7.77 ± 3.31 mm, respectively. At the last follow-up, the group that received Gotfried positive buttress reduction had a greater Harris hip joint score. Conclusion The success rate of combining inverted triangular cannulated compression screws with Gotfried positive buttress reduction surgery is relatively high. This surgical approach effectively prevents femoral neck shortening and improves hip joint function. Moreover, it is crucial to avoid negative buttress reduction when managing femoral neck fractures.

Abstract Background To explore and compare the values of 3.0T magnetic resonance imaging (MRI) T2 mapping in evaluating the degree of acetabular cartilage degeneration in hip replacement surgery. Methods A total of 26 elderly patients with femoral neck fractures who were scanned in 3.0T MRI T2 mapping quantification technique were included. Basing on MRI images, the degree of acetabular cartilage degeneration was classified into Grade 0, 1, 2, 3 and 4, according to the International Cartilage Repair Society (ICRS) scores. In addition, 8 healthy volunteers were included for control group. Results By comparison with health population, T2 relaxation values in the anterior, superior, and posterior regions of acetabular cartilage in patients with femoral neck fracture were obviously increased (P 0.05). Importantly, acetabular cartilage degeneration can be detected through signal changes of T2 mapping pseudo-color images. Conclusion 3.0T MRI T2 mapping technology can be used to determine the degree of acetabular cartilage degeneration, which can effectively monitor the disease course.

Abstract The selection of implants for fixing unstable femoral neck fractures (FNF) remains contentious. This study employs finite element analysis to examine the biomechanics of treating Pauwels type III femoral neck fractures using cannulated compression screws (3CS), biplane double-supported screw fixation (BDSF), and the femoral neck system (FNS). A three-dimensional model of the proximal femur was developed using computed tomography scans. Fracture models of the femoral neck were created with 3CS, BDSF, and FNS fixations. Von Mises stress on the proximal femur, fracture ends, internal fixators, and model displacements were assessed and compared across the three fixation methods (3CS, BDSF, and FNS) during the heel strike of normal walking. The maximum Von Mises stress in the proximal fragment was significantly higher with 3CS fixation compared to BDSF and FNS fixations (120.45 MPa vs. 82.44 MPa and 84.54 MPa, respectively). Regarding Von Mises stress distribution at the fracture ends, the highest stress in the 3CS group was 57.32 MPa, while BDSF and FNS groups showed 51.39 MPa and 49.23 MPa, respectively. Concerning implant stress, the FNS model exhibited greater Von Mises stress compared to the 3CS and BDSF models (236.67 MPa vs. 134.86 MPa and 140.69 MPa, respectively). Moreover, BDSF displayed slightly lower total displacement than 3CS fixation (7.19 mm vs. 7.66 mm), but slightly higher displacement than FNS (7.19 mm vs. 7.03 mm). This study concludes that BDSF outperforms 3CS fixation in terms of biomechanical efficacy and demonstrates similar performance to the FNS approach. As a result, BDSF stands as a dependable alternative for treating Pauwels type III femoral neck fractures.

Objective For elderly femoral neck fracture patients, anemia is one of the most common complications, increasing the risk of postoperative adverse events. Tranexamic acid (TXA) has been widely applied to the perioperative blood management. However, the optimal route of TXA administration in elderly femoral neck fracture remains unclear. The aim of this study is to evaluate the efficacy and safety of oral and intravenous (IV) application of TXA in elderly patients with femoral neck fracture undergoing total hip arthroplasty (THA) and hemiarthroplasty (HA). Methods All elderly patients aged over 65 years old diagnosed with femoral neck fracture admitted to the trauma orthopedics from August 1, 2020 to February 28, 2022 were enrolled in this prospective cohort study. Participants were divided into three groups: oral group: TXA 2g orally 2 h before incision; IV group: intravenous infusion of TXA 1g 15 min before incision; and control group: usual hemostatic method. The primary outcomes were total blood loss, allogeneic transfusion rate, and postoperative thromboembolic events. SPSS 23.0 (IBM, Armonk, NY, USA) was used for statistical analysis, and p ≤ 0.05 was considered statistically significant. Results A total of 100 patients were enrolled, including 32 cases in the oral group, 34 cases in the IV group and 34 cases in the control group. Compared with the control group, the total perioperative blood loss in the oral and IV groups was significantly decreased (763.92 ± 358.64 mL vs 744.62 ± 306.88 mL vs 1250.60 ± 563.37 mL, p = 0.048). No significant difference was identified between the oral and IV groups (p = 0.970). The rate of allogeneic transfusion was lower in the oral and IV groups than in the control group, but the difference had no statistical significant (6 vs 5 vs 12, p = 0.108), However, subgroup analysis showed that the IV and oral groups in patients who underwent THA have significant lower transfusion rate compared with the control group (1 vs 3 vs 7, p = 0.02). During 6 months follow‐up, no thromboembolic events were identified. Two patients (one from the oral group and one from the control group) died of respiratory failure. The cost of blood management from the oral group was significantly lower than IV (p

BACKGROUND: Pauwels III femoral neck fracture is a typical unstable fracture characterized by high vertical shear force and high incidence of postoperative complications. At present, there are many fixation methods for Pauwels III fracture, and there is no clear conclusion as to which internal fixation is the best fixation method for Pauwels III femoral neck fracture in young adults. OBJECTIVE: To compare the clinical effect of three inverted triangle cannulated screws assisted transverse lag screws and femoral neck system in fixing Pauwels III femoral neck fractures of young adults. METHODS: From May 2021 to December 2022, 21 young and middle-aged patients with Pauwels III femoral neck fracture were treated with three inverted triangle cannulated screws assisted by transverse lag screws and femoral neck system in Affiliated Hospital of Southwest Medical University. Of them, 9 patients were treated with three inverted triangle cannulated screws and one transverse lag screws perpendicular to the fracture line as the 3+1 cannulated screw group and 12 patients were treated with femoral neck system as the femoral neck system group. The two fixation methods were compared in terms of operation time, intraoperative blood loss, total incision length, intraoperative fluoroscopy times, fracture healing time, and limb function. RESULTS AND CONCLUSION: (1) All patients were followed up. Patients in the 3+1 cannulated screw group were followed up for 10-25 months, with a mean of (17.44±4.30) months. The patients in the femoral neck system group were followed up for 8-24 months, with a mean of (15.58±4.68) months. (2) The intraoperative fluoroscopy times and Harris score at 3 months postoperatively in the femoral neck system group were better than those in the 3+1 cannulated screw group, and the difference was statistically significant (P < 0.05). The intraoperative blood loss, total incision length, and femoral neck shortening distance in the 3+1 cannulated screw group were better than those in the femoral neck system group, and the differences were statistically significant (P < 0.05). There was no significant difference in operation time, fracture healing time, and Harris score at the last follow-up between the two groups (P > 0.05). (3) It is indicated that three inverted triangle cannulated screws assisted transverse lag screw and femoral neck system can achieve good clinical effects in the treatment of young and middle-aged Pauwels III femoral neck fracture. The femoral neck system has fewer intraoperative fluoroscopy times and better early overall stability, while the 3+1 cannulated screw is more minimally invasive, easier to operate. Both fixation methods are worthy of clinical application and promotion, and can be selected according to the actual clinical situation. [ABSTRACT FROM AUTHOR]

BACKGROUND: At present, there is still controversy in clinical practice about the choice of internal fixation of Pauwels type III femoral neck fracture, and the selection of internal fixation that provides stable fixation strength is the key basis for achieving Pauwels type III fracture fixation. OBJECTIVE: The three-dimensional finite element analysis method was used to test the difference in biomechanical strength of three types of internal fixation in Pauwels type III femoral neck fracture, which provided a reference for its clinical treatment. METHODS: Using the CT data of the left femur of a healthy male volunteer, a complete femur and its cancellous bone were reconstructed in Mimics software, and Geomagic studio software was used for reverse modeling. Cannulated compression screw, dynamic hip screw, and femoral neck system were created in UG-NX software. Three kinds of internal fixation models were assembled on the femur model, and Pauwels type III femoral neck fracture was simulated by Hypermesh software. Finally, Abaqus software was used to carry out finite element experimental analysis to analyze and compare the stress distribution, stress peak, strain, and displacement distribution caused by fixed femoral neck fracture of different internal fixation systems. RESULTS AND CONCLUSION: (1) The stress of the proximal femur bone mass was mainly distributed in the area below the femoral neck near the fracture end, with the highest stress peak in the dynamic hip screw group and the smallest in the femoral neck system group. (2) The stress distribution of the internal fixation device was mainly concentrated on the screw surface near the fracture line, with the highest stress peak in the femoral neck system group and the smallest in the dynamic hip screw group. (3) The main strain field of the proximal femur bone mass was distributed in the upper surface area where the bone and screw contacted, and the yield strain was the smallest in the femoral neck system group and the largest in the cannulated compression screw group. (4) The main strain field of the internal fixation device model was distributed on the upper surface of the femoral neck screw, with the yield strain being the smallest in the femoral neck system group and the largest in the cannulated compression screw group. (5) The displacement distribution values of femur, proximal bone mass, distal bone block, internal fixation device and internal fixation with the femur as a whole in the three femoral neck fracture internal fixation models decreased gradually from proximal to distal, and the peak displacement of the femoral neck system group was the largest and the lowest in the dynamic hip screw group. (6) The results showed that when the Pauwels type III femoral neck fracture was fixed, the stress distribution of femoral neck system was more uniform, the mechanical conduction characteristics were better, and it was subjected to lower yield strain, higher stress and higher displacement. It has relatively better biomechanical stability and can provide a superior mechanical environment for fracture healing. [ABSTRACT FROM AUTHOR]

1. Abstract: Objectives: Bipolar hemiarthroplasty is commonly performed to treat displaced femoral neck fractures in osteoporotic patients. This study aimed to assess the occurrence and outcomes of unplanned return visits to the emergency department (ED) within 90 days following bipolar hemiarthroplasty for displaced femoral neck fractures. Methods: The clinical data of 1322 consecutive patients who underwent bipolar hemiarthroplasty for osteoporotic femoral neck fractures at a tertiary medical center were analyzed. Data from the patients’ electronic medical records, including demographic information, comorbidities, and operative details, were collected. The risk factors and mortality rates were analyzed. Results: Within 90 days after surgery, 19.9% of patients returned to the ED. Surgery-related reasons accounted for 20.2% of the patient's returns. Older age, a high Charlson comorbidity index score, chronic kidney disease, and a history of cancer were identified as significant risk factors for unplanned ED visits. Patients with uncemented implants had a significantly greater risk of returning to the ED due to periprosthetic fractures than did those with cemented implants (P = 0.04). Patients who returned to the ED within 90 days had an almost fivefold greater 1-year mortality rate (15.2% vs 3.1%, P

Abstract Background Basicervical femoral neck fracture is a rare proximal femur fracture with a high implant failure rate. Biomechanical comparisons between cephalomedullary nails (CMNs) and dynamic hip screws (DHSs) under torsion loading are lacking. This study compared the biomechanical performance of three fixations for basicervical femoral neck fractures under torsion load during early ambulation. Methods The biomechanical study models used three fixations: a DHS, a DHS with an anti-rotation screw, and a short CMN. Finite element analysis was used to simulate hip rotation with muscle forces related to leg swing applied to the femur. The equivalent von Mises stress (EQV) on fixation, fragment displacement, and strain energy density at the proximal cancellous bone were monitored for fixation stability. Results The EQV of the short CMN construct (304.63 MPa) was comparable to that of the titanium DHS construct (293.39 MPa) and greater than that of the titanium DHS with an anti-rotation screw construct (200.94 MPa). The proximal fragment displacement in the short CMN construct was approximately 0.13 mm, the greatest among the constructs. The risk of screw cutout for the lag screw in short CMNs was 3.1–5.8 times greater than that for DHSs and DHSs with anti-rotation screw constructs. Conclusions Titanium DHS combined with an anti-rotation screw provided lower fragment displacement, stress, and strain energy density in the femoral head than the other fixations under torsion load. Basicervical femoral neck fracture treated with CMNs may increase the risk of lag screw cutout. Graphical abstract

Abstract Objective A novel Proximal Femoral Bionic Nail (PFBN) has been developed by a research team for the treatment of femoral neck fractures. This study aims to compare the biomechanical properties of the innovative PFBN with those of the conventional Inverted Triangular Cannulated Screw (ITCS) fixation method through biomechanical testing. Methods Sixteen male femoral specimens preserved in formalin were selected, with the donors’ age at death averaging 56.1 ± 6.3 years (range 47–64 years), and a mean age of 51.4 years. The femurs showed no visible damage and were examined by X-rays to exclude diseases affecting bone quality such as tumors, severe osteoporosis, and deformities. The 16 femoral specimens were randomly divided into an experimental group (n = 8) and a control group (n = 8). All femurs were prepared with Pauwels type III femoral neck fractures, fixed with PFBN in the experimental group and ITCS in the control group. Displacement and stress limits of each specimen were measured through cyclic compression tests and failure experiments, and vertical displacement and strain values under a 600 N vertical load were measured in all specimens through vertical compression tests. Results In the vertical compression test, the average displacement at the anterior head region of the femur was 0.362 mm for the PFBN group, significantly less than the 0.480 mm for the ITCS group (p

Aims: The localization of necrotic areas has been reported to impact the prognosis and treatment strategy for osteonecrosis of the femoral head (ONFH). Anteroposterior localization of the necrotic area after a femoral neck fracture (FNF) has not been properly investigated. We hypothesize that the change of the weight loading direction on the femoral head due to residual posterior tilt caused by malunited FNF may affect the location of ONFH. We investigate the relationship between the posterior tilt angle (PTA) and anteroposterior localization of osteonecrosis using lateral hip radiographs. Methods: Patients aged younger than 55 years diagnosed with ONFH after FNF were retrospectively reviewed. Overall, 65 hips (38 males and 27 females; mean age 32.6 years (SD 12.2)) met the inclusion criteria. Patients with stage 1 or 4 ONFH, as per the Association Research Circulation Osseous classification, were excluded. The ratios of anterior and posterior viable areas and necrotic areas of the femoral head to the articular surface were calculated by setting the femoral head centre as the reference point. The PTA was measured using Palm’s method. The association between the PTA and viable or necrotic areas of the femoral head was assessed using Spearman’s rank correlation analysis (median PTA 6.0° (interquartile range 3 to 11.5)). Results: We identified a negative correlation between PTA and anterior viable areas (rho −0.477; p = 0.001), and no correlation between PTA and necrotic (rho 0.229; p = 0.067) or posterior viable areas (rho 0.204; p = 0.132). Conclusion: Our results suggest that residual posterior tilt after FNF could affect the anteroposterior localization of necrosis. Cite this article: Bone Jt Open 2024;5(5):394–400.

Abstract Background Although it is generally believed that the femoral neck fracture is related to the femoral neck geometric parameters (FNGPs), the association between the risk of osteoporotic fracture of the femoral neck and FNGPs in native Chinese women is still unclear. Methods A total of 374 female patients (mean age 70.2 ± 9.32 years) with osteoporotic fracture of the femoral neck, and 374 non-fracture control groups were completely matched with the case group according to the age ratio of 1:1. Using DXA bone densitometer to measured eight FNGPs: the outer diameter (OD), cross-sectional area (CSA), cortical thickness (CT), endocortical diameter (ED), buckling ratio (BR), section modulus (SM), cross-sectional moment of inertia (CSMI), and compressive strength index (CSI) at the narrowest point of the femoral neck. Results Compared with the control group, the average values of OD (2.9%), ED (4.5%), and BR (26.1%) in the patient group significantly increased (p = 0.015 to

Abstract Background Mortality of patients with a femoral neck fracture is high, especially within the first year after surgery, but also remains elevated thereafter. The aim of this study was to identify factors potentially associated with long-term mortality in patients homogeneously treated with hemiarthroplasty for femoral neck fracture. Methods This retrospective cohort study was performed at a single level 1 national trauma center at the university hospital of Leipzig (Saxony, Germany). The study time-window was January 1, 2010 to December 31, 2020. Primary outcome measure was mortality depending on individual patient-related characteristics and perioperative risk factors. Inclusion criteria was a low-energy femoral neck fracture (Garden I-IV) in geriatric patients 60 years of age or older that were primarily treated with bipolar hemiarthroplasty. Date of death or actual residence of patients alive was obtained from the population register of the eastern German state of Saxony, Germany. The outcome was tested using the log-rank test and plotted using Kaplan-Meier curves. Unadjusted and adjusted for other risk factors such as sex and age, hazard ratios were calculated using Cox proportional hazards models and presented with 95% confidence intervals (CI). Results The 458 included patients had a median age of 83 (IQR 77–89) years, 346 (75%) were female and 113 (25%) male patients. Mortality rates after 30 days, 1, 5 and 10 years were 13%, 25%, 60% and 80%, respectively. Multivariate regression analysis revealed age (HR = 1.1; p

Abstract Background Hip hemiarthroplasty has traditionally been used to treat displaced femoral neck fractures in older, frailer patients whilst total hip replacements (THR) have been reserved for younger and fitter patients. However, not all elderly patients are frail, and some may be able to tolerate and benefit from an acute THR. Nonagenarians are a particularly heterogenous subpopulation of the elderly, with varying degrees of independence. Since THRs are performed electively as a routine treatment for osteoarthritis in the elderly, its safety is well established in the older patient. The aim of this study was to compare the safety of emergency THR to elective THR in nonagenarians. Methods A retrospective 10-year cohort study was conducted using data submitted to the National Hip Fracture Database (NHFD) across three hospitals in one large NHS Trust. Data was collected from 126 nonagenarians who underwent THRs between 1st January 2010 – 31st December 2020 and was categorised into emergency THR and elective THR groups. Mortality rates were compared between the two groups. Secondary outcomes were also compared including postoperative complications (dislocations, revision surgeries, and periprosthetic fracture), length of stay in hospital, and discharge destination. Results There was no significant difference in mortality between the two groups, with 1-year mortality rates of 11.4% and 12.1% reported for emergency and elective patients respectively (p = 0.848). There were no significant differences in postoperative complication rate and discharge destination. Patients who had emergency THR spent 5.56 days longer in hospital compared to elective patients (p = 0.015). Conclusion There is no increased risk of 1-year mortality in emergency THR compared to elective THR, in a nonagenarian population. Therefore, nonagenarians presenting with a hip fracture who would have been considered for a THR if presenting on an elective basis should not be precluded from an emergency THR on safety grounds. Trial registration Not necessary as this was deemed not to be clinical research, and was considered to be a service evaluation.

Abstract Objective To investigate the efficacy of using pre-sliding technique to prevent postoperative shortening of displaced femoral neck fracture fixed with femoral neck system (FNS). Methods Retrospective analysis of 110 cases of displaced femoral neck fracture treated with femoral neck system from September 2019 to November 2022 in our center, which were divided into 56 cases in the pre-sliding group and 54 cases in the traditional group. The baseline data such as gender, age, side, mechanism of injury, fracture type, operation time, intraoperative bleeding were recorded and compared between the two groups, and the quality of fracture reduction, shortening distance, Tip Apex Distance (TAD), union time, Harris score of the hip were also compared between the two groups. Results The TAD value of the pre-sliding group was smaller than that of the traditional group, and the difference was statistically significant (P 0.05), and no statistically significant difference in fracture healing time between the two groups (P = 0.113). Conclusion The use of the pre-sliding technique of displaced femoral neck fracture fixed with FNS reduces the incidence of moderate and severe shortening, improves the postoperative TAD value, and improves the hip function scores, with a satisfactory midterm efficacy.

Abstract Objective Femoral neck fractures (FNFs) are among the most common fractures in elderly individuals. Surgery is the main treatment for FNFs, and osteonecrosis of the femoral head (ONFH) is one of the unacceptable complications. This study aimed to assess both the clinical and radiological outcomes in patients with FNFs treated with three parallel cannulated screws and to identify relationship between screws position and ONFH. Patients and methods A total of 100 patients who were treated with closed reduction and fixed with 3 parallel cannulated screws met the inclusion criteria between January 2014 and December 2020 at authors’ institution. The follow-up duration, age, sex, affected side, and injury-to-surgery interval were collected; the neck-shaft angle of both hips, screw-apex distance (SAD) and the tip-apex distance (TAD)were measured; and the Garden classification, quality of reduction and presence of ONFH were evaluated. Results The sample consisted of 37 males and 63 females, with 60 left and 40 right hips affected. The mean age of patients was 54.93 ± 12.24 years, and the mean follow-up was 56.3 ± 13.38 months. The overall incidence of ONFH was 13%. No significant difference was observed in the incidence of ONFH by affected side, age, fracture displacement, injury-to-surgery interval, neck-shaft angle deviation, or reduction quality. The SAD was significantly shorter in ONFH patients than in normal patients for all three screws (p = 0.02, 0.02, and 0.01, respectively). Conclusions The short SAD of all screws is associated with femoral head necrosis of FNFs treated with 3 cannulated screws. The short SAD indicated that screws malpositioning in the weight-bearing area of the femoral head, potentially harming the blood supply and compromising the anchorage of the primary compressive trabeculae in this region.

Objective Surgical treatment with internal fixation, specifically percutaneous fixation with three cannulated compression screws (CCSs), is the preferred choice for young and middle‐aged patients. The mechanical advantage of the optimal spatial configuration with three screws provides maximum dispersion and cortical support. We suspect that the spatial proportion of the oblique triangle configuration (OTC) in the cross‐section of the femoral neck isthmus (FNI) may significantly improve shear and fatigue resistance of the fixed structure, thereby stabilizing the internal fixation system in femoral neck fracture (FNF). This study aims to explore the mechanical features of OTC and provide a mechanical basis for its clinical application. Methods Twenty Sawbone femurs were prepared as Pauwels type III FNF models and divided equally into two fixation groups: OTC and inverted equilateral triangle configuration (IETC). Three 7.3 mm diameter cannulated compression screws (CCSs) were used for fixation. The specimens of FNF after screw internal fixation were subjected to static loading and cyclic loading tests, respectively, with five specimens for each test. Axial stiffness, 5 mm failure load, ultimate load, shear displacement, and frontal rotational angle of two fragments were evaluated. In the cyclic loading test, the load sizes were 700 N, 1400 N, and 2100 N, respectively, and the fracture end displacement was recorded. Results were presented as means ± SD. Data with normal distributions were compared by the Student's t test. Results In the static loading test, the axial stiffness, ultimate load, shear displacement, and frontal rotational angle of two fragments were (738.64 vs. 620.74) N/mm, (2957.61 vs. 2643.06) N, (4.67 vs. 5.39) mm, and (4.01 vs. 5.52)° (p 0.05). Conclusion When three CCSs are inserted in parallel to fix FNF, the OTC of three screws has obvious biomechanical advantages, especially in shear resistance and early postoperative weight‐bearing, which provides a mechanical basis for clinical selection of ideal spatial configuration for unstable FNF.

AbstractA validated femoral neck fracture model stabilized with three inverted cannulated screws was used to consider different intraoperative scenarios when the inferior screw hole is inadvertently started too inferiorly. These scenarios were to: (1) abandon the misplaced inferior screw hole and restart this hole more proximally, or (2) accept the mispositioned placement of the inferior screw and insert the remaining superior screws parallel or convergent to the inferior screw. Utilizing the second option and accepting the errant hole was associated with the greatest interfragmentary motion and stresses in the bone and hardware. In contrast, the first option created an improved mechanical environment for healing. [ABSTRACT FROM AUTHOR]

Background: Basicervical femoral neck fracture is a rare proximal femur fracture with a high implant failure rate. Biomechanical comparisons between cephalomedullary nails (CMNs) and dynamic hip screws (DHSs) under torsion loading are lacking. This study compared the biomechanical performance of three fixations for basicervical femoral neck fractures under torsion load during early ambulation. Methods: The biomechanical study models used three fixations: a DHS, a DHS with an anti-rotation screw, and a short CMN. Finite element analysis was used to simulate hip rotation with muscle forces related to leg swing applied to the femur. The equivalent von Mises stress (EQV) on fixation, fragment displacement, and strain energy density at the proximal cancellous bone were monitored for fixation stability. Results: The EQV of the short CMN construct (304.63 MPa) was comparable to that of the titanium DHS construct (293.39 MPa) and greater than that of the titanium DHS with an anti-rotation screw construct (200.94 MPa). The proximal fragment displacement in the short CMN construct was approximately 0.13 mm, the greatest among the constructs. The risk of screw cutout for the lag screw in short CMNs was 3.1–5.8 times greater than that for DHSs and DHSs with anti-rotation screw constructs. Conclusions: Titanium DHS combined with an anti-rotation screw provided lower fragment displacement, stress, and strain energy density in the femoral head than the other fixations under torsion load. Basicervical femoral neck fracture treated with CMNs may increase the risk of lag screw cutout. [ABSTRACT FROM AUTHOR]

Objective: A novel Proximal Femoral Bionic Nail (PFBN) has been developed by a research team for the treatment of femoral neck fractures. This study aims to compare the biomechanical properties of the innovative PFBN with those of the conventional Inverted Triangular Cannulated Screw (ITCS) fixation method through biomechanical testing. Methods: Sixteen male femoral specimens preserved in formalin were selected, with the donors' age at death averaging 56.1 ± 6.3 years (range 47–64 years), and a mean age of 51.4 years. The femurs showed no visible damage and were examined by X-rays to exclude diseases affecting bone quality such as tumors, severe osteoporosis, and deformities. The 16 femoral specimens were randomly divided into an experimental group (n = 8) and a control group (n = 8). All femurs were prepared with Pauwels type III femoral neck fractures, fixed with PFBN in the experimental group and ITCS in the control group. Displacement and stress limits of each specimen were measured through cyclic compression tests and failure experiments, and vertical displacement and strain values under a 600 N vertical load were measured in all specimens through vertical compression tests. Results: In the vertical compression test, the average displacement at the anterior head region of the femur was 0.362 mm for the PFBN group, significantly less than the 0.480 mm for the ITCS group (p < 0.001). At the fracture line area, the average displacement for the PFBN group was also lower than that of the ITCS group (0.196 mm vs. 0.324 mm, p < 0.001). The difference in displacement in the shaft area was smaller, but the average displacement for the PFBN group (0.049 mm) was still significantly less than that for the ITCS group (0.062 mm, p = 0.016). The situation was similar on the posterior side of the femur. The average displacements in the head area, fracture line area, and shaft area for the PFBN group were 0.300 mm, 0.168 mm, and 0.081 mm, respectively, while those for the ITCS group were 0.558 mm, 0.274 mm, and 0.041 mm, with significant differences in all areas (p < 0.001). The average strain in the anterior head area for the PFBN group was 4947 μm/m, significantly less than the 1540 μm/m for the ITCS group (p < 0.001). Likewise, in the fracture line and shaft areas, the average strains for the PFBN group were significantly less than those for the ITCS group (p < 0.05). In the posterior head area, the average strain for the PFBN group was 4861 μm/m, significantly less than the 1442 μm/m for the ITCS group (p < 0.001). The strain conditions in the fracture line and shaft areas also showed the PFBN group was superior to the ITCS group (p < 0.001). In cyclic loading experiments, the PFBN fixation showed smaller maximum displacement (1.269 mm vs. 1.808 mm, p < 0.001), indicating better stability. In the failure experiments, the maximum failure load that the PFBN-fixated fracture block could withstand was significantly higher than that for the ITCS fixation (1817 N vs. 1116 N, p < 0.001). Conclusion: The PFBN can meet the biomechanical requirements for internal fixation of femoral neck fractures. PFBN is superior in biomechanical stability compared to ITCS, particularly showing less displacement and higher failure resistance in cyclic load and failure experiments. While there are differences in strain performance in different regions between the two fixation methods, overall, PFBN provides superior stability. [ABSTRACT FROM AUTHOR]

Introduction: Cemented hemiarthroplasty (HA) is preferred in treating dislocated femoral neck fractures in elderly, osteoporotic patients, since uncemented HA was associated with mechanical complications more frequently. Cementation can conversely cause cardiopulmonary complications, leading to demand on safe, uncemented implants addressing osteoporosis. This study is set up as a retrospective feasibility study on the use of an uncemented, collared wedge implant (Actis®, DePuy Synthes, Warsaw, IN), for HA in elderly patients, focusing on complication rate. Materials and methods: From 1,194 patients, treated with HA in two study centers between 2017–2022, 188 received Actis® uncemented stem with bipolar head. Complete follow-up were retrospectively collected in all patients. Results: In 188 patients (f: 64.9%; age: 83.1 ± 7.7a) included, no case of intra-operative mortality was recorded. 2 day mortality was 1.1%, 30 day mortality was 7.4% and 1 year mortality was 28.2%. 2 (1.1%) intra-operative fractures did not receive surgical revision, 3 (1.6%) post-operative periprosthetic fractures caused separate admission and revision. 2 cases (1.1%) of early infection required surgical revision. Conclusion: Our data provide proof of concept, that Actis® Stem allows an alternative, uncemented treatment option for displaced femoral neck fractures with HA. In case of preoperative or intraoperative medial cortical bone defects, stability of this implant is deteriorated. [ABSTRACT FROM AUTHOR]

OBJECTIVE: This study involved an analysis of preoperative deep vein thrombosis (DVT) incidence and changes in coagulation function among elderly patients suffering from hip fractures. The objective was to offer guidance on the prevention and management of preoperative DVT in the lower extremities of elderly individuals with hip fractures. METHODS: A total of 282 elderly individuals with a hip fracture were enrolled and divided into two groups based on the location of the fracture: femoral intertrochanteric fracture (FIF, 161 individuals) and femoral neck fracture (FNF, 121 individuals). The two groups were compared with respect to baseline characteristics, including gender, age, and comorbid chronic diseases. Furthermore, the analysis encompassed the incidence of preoperative DVT in both lower extremities, along with seven coagulation parameters and platelet count before the surgical procedure. RESULTS: There was no significant difference in baseline information between the two groups. The incidence of preoperative DVT in the FIF group was higher than that in the FNF group, along with a significantly higher percentage of patients exhibiting increased levels of D-dimer and fibrinogen/fibrin degradation products (FDPs). CONCLUSION: Preoperative hypercoagulability and a greater prevalence of DVT were observed in elderly individuals with FIF compared to individuals with FNF. This indicates that clinicians should pay attention to elderly patients with FIFs, especially those with increased D-dimer and FDP levels. [ABSTRACT FROM AUTHOR]

Femoral neck system (FNS) is a novel fixed-angle gliding device combining a sliding bolt and an anti-rotational screw to treat femoral neck fractures. It was proven to have comparable biomechanical strength to sliding hip screws. Tip-to-apex distance (TAD) is an established assessment for fixation quality in sliding hip screws. The purpose of our study was to evaluate whether TAD can be used in FNS implant to predict fixation failure. Seventy-six patients receiving FNS fixation for intra-capsular hip fracture were included. TAD was measured from post-operative radiographs and clinical outcomes were collected with a mean follow-up of 14.1 months. The mean TAD for patients who experienced fixation failure was 20.7 mm, versus 19.7 mm for those who did not (p = 0.395). Subgroup analysis among fractures with good reduction quality, defined as no varus angulation, less than 5 degrees of retroversion, and less than 4 mm cortical translation, did not demonstrate statistically significant difference in the mean TAD between failure and non-failure group (20.7 mm vs 19.5 mm, p = 0.68). We conclude that in our study of modest sample size, there was not demonstrable association between TAD and fixation failure in intra-capsular neck of femur patients treated with FNS. [ABSTRACT FROM AUTHOR]

Background: Although it is generally believed that the femoral neck fracture is related to the femoral neck geometric parameters (FNGPs), the association between the risk of osteoporotic fracture of the femoral neck and FNGPs in native Chinese women is still unclear. Methods: A total of 374 female patients (mean age 70.2 ± 9.32 years) with osteoporotic fracture of the femoral neck, and 374 non-fracture control groups were completely matched with the case group according to the age ratio of 1:1. Using DXA bone densitometer to measured eight FNGPs: the outer diameter (OD), cross-sectional area (CSA), cortical thickness (CT), endocortical diameter (ED), buckling ratio (BR), section modulus (SM), cross-sectional moment of inertia (CSMI), and compressive strength index (CSI) at the narrowest point of the femoral neck. Results: Compared with the control group, the average values of OD (2.9%), ED (4.5%), and BR (26.1%) in the patient group significantly increased (p = 0.015 to < 0.001), while CSA (‒15.3%), CT (‒18.2%), SM (‒10.3%), CSMI (‒6.4%), and CSI (‒10.8%) significantly decreased (all p < 0.001). The prevalence of osteoporosis in the lumbar spine, femoral neck, and total hip was, respectively, 82%, 81%, and 65% in fracture patients. Cox proportional hazard model analysis showed that in the age adjusted model, the fracture hazard ratio (HR) of CSA, CT, BR, SM, and CSI significantly increased (HRs = 1.60‒8.33; 95% CI = 1.08‒16.6; all p < 0.001). In the model adjusted for age and femoral neck BMD, HRs of CT (HRs = 3.90‒8.03; 95% CI = 2.45‒15.1; all p < 0.001) and BR (HRs = 1.62‒2.60; 95% CI = 1.20‒5.44; all p < 0.001) were still significantly increased. Conclusion: These results suggest that the majority of osteoporotic fractures of the femoral neck of native Chinese women occur in patients with osteoporosis. CT thinning or BR increase of FNGPs may be independent predictors of fragility fracture of femoral neck in native Chinese women unrelated to BMD. [ABSTRACT FROM AUTHOR]

Introduction: Basicervical femoral neck fracture (FNF) is an uncommon type of femoral neck fracture and is associated with an increased risk of fixation failure due to its inherent instability. The purpose of this study was to compare the surgical parameters and reoperation rate between the use of a multiple cannulated screw (MCS) and fixed angle device (FAD) in treating basicervical FNFs. Methods: We retrospectively reviewed the records of 885 patients who underwent internal fixation between May 2004 and August 2019 to determine basicervical FNF with at least 12 months of follow-up. Among the identified 77 patients with basicervical FNF, 17 patients who underwent multiple cannulated screw (MCS) fixation and 36 patients who underwent fixed angle device (FAD) fixation were included. We compared the rates of fracture-site collapse and reoperations according to the fixation device. Results: Among the 53 patients with basicervical FNF, 13 patients (24.5%) sustained surgical complications (8 collapses of fracture site and 5 reoperations). The reoperation rate in the MCS group was significantly higher than that in the FAD group (23.5% vs. 2.8%, p = 0.016), without any significant difference in the collapse of the fracture site (11.8% vs. 16.7%, p = 0.642). Conclusions: Although basicervical FNF was rare among hip fractures, fracture site collapse was prevalent and prone to fixation failure. Surgeons should keep this in mind, and consider FAD for basicervical FNF. [ABSTRACT FROM AUTHOR]

Background: Mortality of patients with a femoral neck fracture is high, especially within the first year after surgery, but also remains elevated thereafter. The aim of this study was to identify factors potentially associated with long-term mortality in patients homogeneously treated with hemiarthroplasty for femoral neck fracture. Methods: This retrospective cohort study was performed at a single level 1 national trauma center at the university hospital of Leipzig (Saxony, Germany). The study time-window was January 1, 2010 to December 31, 2020. Primary outcome measure was mortality depending on individual patient-related characteristics and perioperative risk factors. Inclusion criteria was a low-energy femoral neck fracture (Garden I-IV) in geriatric patients 60 years of age or older that were primarily treated with bipolar hemiarthroplasty. Date of death or actual residence of patients alive was obtained from the population register of the eastern German state of Saxony, Germany. The outcome was tested using the log-rank test and plotted using Kaplan-Meier curves. Unadjusted and adjusted for other risk factors such as sex and age, hazard ratios were calculated using Cox proportional hazards models and presented with 95% confidence intervals (CI). Results: The 458 included patients had a median age of 83 (IQR 77–89) years, 346 (75%) were female and 113 (25%) male patients. Mortality rates after 30 days, 1, 5 and 10 years were 13%, 25%, 60% and 80%, respectively. Multivariate regression analysis revealed age (HR = 1.1; p < 0.001), male gender (HR = 1.6; p < 0.001), ASA-Score 3–4 vs. 1–2 (HR = 1.3; p < 0.001), dementia (HR = 1.9; p < 0.001) and a history of malignancy (HR = 1.6; p = 0.002) as independent predictors for a higher long-term mortality risk. Perioperative factors such as preoperative waiting time, early surgical complications, or experience of the surgeon were not associated with a higher overall mortality. Conclusions: In the present study based on data from the population registry from Saxony, Germany the 10-year mortality of older patients above 60 years of age managed with hemiarthroplasty for femoral neck fracture was 80%. Independent risk factors for increased long-term mortality were higher patient age, male gender, severe comorbidity, a history of cancer and in particular dementia. Perioperative factors did not affect long-term mortality. [ABSTRACT FROM AUTHOR]

Phosphaturic mesenchymal tumors (PMT) are rare and distinctive tumors that typically result in paraneoplastic syndrome known as tumor-induced osteomalacia (TIO). We report a case of bilateral osteoporotic femoral neck fracture caused by PMT. PMT was surgically resected, followed by sequential treatment of bilateral femoral neck fractures with total hip arthroplasty (THA). A 49-year-old perimenopausal woman experienced consistent bone pain with limb weakness persisting for over 2 years. Initially, she was diagnosed with early osteonecrosis of the femoral head and received nonsurgical treatment. However, from 2020 to 2022, her pain extended to the bilateral shoulders and knees with increased intensity. She had no positive family history or any other genetic diseases, and her menstrual cycles were regular. Physical examination revealed tenderness at the midpoints of the bilateral groin and restricted bilateral hip range of motion, with grade 3/5 muscle strength in both lower extremities. Laboratory findings revealed moderate anemia (hemoglobin 66 g/L), leukopenia (2.70 × 109 /L), neutropenia (1.28 × 109 /L), hypophosphatemia (0.36 mmol/L), high alkaline phosphatase activity (308.00 U/L), and normal serum calcium (2.22 mmol/L). After surgery, additional examinations were performed to explore the cause of hypophosphatemic osteomalacia. After definitive diagnosis, the patient underwent tumor resection via T11 laminectomy on August 6, 2022. Six months after the second THA, the patient regained normal gait with satisfactory hip movement function without recurrence of PMT-associated osteomalacia or prosthesis loosening. By providing detailed clinical data and a diagnostic and treatment approach, we aimed to improve the clinical understanding of femoral neck fractures caused by TIO. [ABSTRACT FROM AUTHOR]

BACKGROUND: The traditional fixation method for femoral neck fractures is three hollow screws inverted triangle fixation, and the optimal fixation method for femoral neck fractures that have not achieved anatomical reduction is inconclusive. OBJECTIVE: To compare the biomechanical properties of cannulated screws internal fixation for sub-capitated femoral neck fracture with different reduction qualities based on finite element analysis. METHODS: The three-dimensional digital model was reconstructed using CT data of the proximal femur from a healthy male volunteer. The femur was modeled to sub-capitated femoral neck fractures. Fracture models were divided into anatomical reduction group, coxa vara group, and coxa valgus group. All fracture model groups were transferred using the standard group, screw depression group, and screw elevation group. A vertical downward stress of 1 400 N was applied to the femoral head at the top of the acetabulum. The displacement and stress distribution of the femur and internal fixator under different fixation methods were observed, and the maximum stress and displacement of the femur and fixator were compared. RESULTS AND CONCLUSION: (1) For anatomical reduction femoral neck fracture, the peak stress of fixation in the standard group, screw depression group and screw elevation group was 41.35, 31.27 and 43.32 MPa, respectively. The maximum peak stress of the femur was found on the screw elevation group (28.58 MPa), and the standard group had the maximum peak displacement. (2) During hip varus, the stresses in the three subgroups were relatively dispersed and even. The peak stress of the femur in the standard group was the smallest, but the peak displacement was the largest. The stability of fixation might be poor. The peak displacement of the femur in the screw depression group was the smallest. (3) In the hip valgus, obvious screw stress concentration appeared in the screw depression group, and the peak displacement was the largest among the three subgroups, and an in-out-in phenomenon appeared. The peak stress of the screws in the screw elevation group was the largest among the three subgroups, but the peak displacement was the smallest. (4) It is concluded that for sub-capitated femoral neck fractures that are completely anatomically reduced, it is recommended to use standard inverted triangular nails for fixation. When the hip varus and hip valgus occur within the allowable range of the reduction standard, it is recommended to use the inverted triangle screw to fix it by rotating the corresponding angle in the same direction as the hip varus or valgus. [ABSTRACT FROM AUTHOR]

Background: Hip hemiarthroplasty has traditionally been used to treat displaced femoral neck fractures in older, frailer patients whilst total hip replacements (THR) have been reserved for younger and fitter patients. However, not all elderly patients are frail, and some may be able to tolerate and benefit from an acute THR. Nonagenarians are a particularly heterogenous subpopulation of the elderly, with varying degrees of independence. Since THRs are performed electively as a routine treatment for osteoarthritis in the elderly, its safety is well established in the older patient. The aim of this study was to compare the safety of emergency THR to elective THR in nonagenarians. Methods: A retrospective 10-year cohort study was conducted using data submitted to the National Hip Fracture Database (NHFD) across three hospitals in one large NHS Trust. Data was collected from 126 nonagenarians who underwent THRs between 1st January 2010 – 31st December 2020 and was categorised into emergency THR and elective THR groups. Mortality rates were compared between the two groups. Secondary outcomes were also compared including postoperative complications (dislocations, revision surgeries, and periprosthetic fracture), length of stay in hospital, and discharge destination. Results: There was no significant difference in mortality between the two groups, with 1-year mortality rates of 11.4% and 12.1% reported for emergency and elective patients respectively (p = 0.848). There were no significant differences in postoperative complication rate and discharge destination. Patients who had emergency THR spent 5.56 days longer in hospital compared to elective patients (p = 0.015). Conclusion: There is no increased risk of 1-year mortality in emergency THR compared to elective THR, in a nonagenarian population. Therefore, nonagenarians presenting with a hip fracture who would have been considered for a THR if presenting on an elective basis should not be precluded from an emergency THR on safety grounds. Trial registration: Not necessary as this was deemed not to be clinical research, and was considered to be a service evaluation. [ABSTRACT FROM AUTHOR]