Search

Replicative DNA polymerases cannot initiate DNA synthesis de novo and rely on dedicated RNA polymerases, primases, to generate a short primer. This primer is then extended by the DNA polymerase. In diverse archaeal species, the primase has long been known to have the ability to synthesize both RNA and DNA. However, the relevance of these dual nucleic acid synthetic modes for productive primer synthesis has remained enigmatic. In the current work, we reveal that the ability of primase to polymerize DNA serves dual roles in promoting the hand-off of the primer to the replicative DNA polymerase holoenzyme. First, it creates a 5'-RNA-DNA-3' hybrid primer which serves as an optimal substrate for elongation by the replicative DNA polymerase. Second, it promotes primer release by primase. Furthermore, modeling and experimental data indicate that primase incorporates a deoxyribonucleotide stochastically during elongation and that this switches the primase into a dedicated DNA synthetic mode polymerase., (© 2022. The Author(s).)

DNA supercoiling controls a variety of cellular processes, including transcription, recombination, chromosome replication, and segregation, across all domains of life. As a physical property, DNA supercoiling alters the double helix structure by under- or over-winding it. Intriguingly, the evolution of DNA supercoiling reveals both similarities and differences in its properties and regulation across the three domains of life. Whereas all organisms exhibit local, constrained DNA supercoiling, only bacteria and archaea exhibit unconstrained global supercoiling. DNA supercoiling emerges naturally from certain cellular processes and can also be changed by enzymes called topoisomerases. While structurally and mechanistically distinct, topoisomerases that dissipate excessive supercoils exist in all domains of life. By contrast, topoisomerases that introduce positive or negative supercoils exist only in bacteria and archaea. The abundance of topoisomerases is also transcriptionally and post-transcriptionally regulated in domain-specific ways. Nucleoid-associated proteins, metabolites, and physicochemical factors influence DNA supercoiling by acting on the DNA itself or by impacting the activity of topoisomerases. Overall, the unique strategies that organisms have evolved to regulate DNA supercoiling hold significant therapeutic potential, such as bactericidal agents that target bacteria-specific processes or anticancer drugs that hinder abnormal DNA replication by acting on eukaryotic topoisomerases specialized in this process. The investigation of DNA supercoiling therefore reveals general principles, conserved mechanisms, and kingdom-specific variations relevant to a wide range of biological questions., (© 2021 The Protein Society.)

DNA replication is fundamental to the propagation of all life on the planet. Remarkably, given the central importance for this process, two distinct core cellular DNA replication machineries have evolved. One is found in the bacterial domain of life and the other is present in Archaea and Eukarya. The archaeal machinery represents a simplified and presumably ancestral form of the eukaryotic DNA replication apparatus. As such, archaeal replication proteins have been studied extensively as models for their eukaryal counterparts. In addition, a number of archaea have been developed as model organisms. Accordingly, there has been a considerable increase in our knowledge of how archaeal chromosomes are replicated. It has become apparent that the majority of archaeal cells replicate their genomes from multiple origins per chromosome. Thus, at both organizational and mechanistic levels, archaeal DNA replication resembles that of eukarya. In this chapter, we will describe recent advances in our understanding of the basis of archaeal origin definition and how the archaeal initiator proteins recruit the replicative helicase to origins., (© 2016 Elsevier Inc. All rights reserved.)

During replication, Okazaki fragment maturation is a fundamental process that joins discontinuously synthesized DNA fragments into a contiguous lagging strand. Efficient maturation prevents repeat sequence expansions, small duplications, and generation of double-stranded DNA breaks. To address the components required for the process in Thermococcus, Okazaki fragment maturation was reconstituted in vitro using purified proteins from Thermococcus species 9°N or cell extracts. A dual color fluorescence assay was developed to monitor reaction substrates, intermediates, and products. DNA polymerase D (polD) was proposed to function as the replicative polymerase in Thermococcus replicating both the leading and the lagging strands. It is shown here, however, that it stops before the previous Okazaki fragments, failing to rapidly process them. Instead, Family B DNA polymerase (polB) was observed to rapidly fill the gaps left by polD and displaces the downstream Okazaki fragment to create a flap structure. This flap structure was cleaved by flap endonuclease 1 (Fen1) and the resultant nick was ligated by DNA ligase to form a mature lagging strand. The similarities to both bacterial and eukaryotic systems and evolutionary implications of archaeal Okazaki fragment maturation are discussed., (© 2015 by The American Society for Biochemistry and Molecular Biology, Inc.)

DNA replicases routinely stall at lesions encountered on the template strand, and translesion DNA synthesis (TLS) is used to rescue progression of stalled replisomes. This process requires specialized polymerases that perform translesion DNA synthesis. Although prokaryotes and eukaryotes possess canonical TLS polymerases (Y-family Pols) capable of traversing blocking DNA lesions, most archaea lack these enzymes. Here, we report that archaeal replicative primases (Pri S, primase small subunit) can also perform TLS. Archaeal Pri S can bypass common oxidative DNA lesions, such as 8-Oxo-2'-deoxyguanosines and UV light-induced DNA damage, faithfully bypassing cyclobutane pyrimidine dimers. Although it is well documented that archaeal replicases specifically arrest at deoxyuracils (dUs) due to recognition and binding to the lesions, a replication restart mechanism has not been identified. Here, we report that Pri S efficiently replicates past dUs, even in the presence of stalled replicase complexes, thus providing a mechanism for maintaining replication bypass of these DNA lesions. Together, these findings establish that some replicative primases, previously considered to be solely involved in priming replication, are also TLS proficient and therefore may play important roles in damage tolerance at replication forks.

The ability of a DNA polymerase to replicate DNA beyond a mismatch containing a DNA lesion during postlesion DNA synthesis (PLS) can be a contributing factor to mutagenesis. In this study, we investigate the ability of Dpo4, a Y-family DNA polymerase from Sulfolobus solfataricus, to perform PLS beyond the pro-mutagenic DNA adducts O(6)-benzylguanine (O(6)-BnG) and O(6)-methylguanine (O(6)-MeG). Here, O(6)-BnG and O(6)-MeG were paired opposite artificial nucleosides that were structurally altered to systematically test the influence of hydrogen bonding and base pair size and shape on O(6)-alkylguanine PLS. Dpo4-mediated PLS was more efficient past pairs containing Benzi than pairs containing the other artificial nucleoside probes. Based on steady-state kinetic analysis, frequencies of mismatch extension were 7.4 × 10(-3) and 1.5 × 10(-3) for Benzi:O(6)-MeG and Benzi:O(6)-BnG pairs, respectively. Correct extension was observed when O(6)-BnG and O(6)-MeG were paired opposite the smaller nucleoside probes Benzi and BIM; conversely, Dpo4 did not extend past the larger nucleoside probes, Peri and Per, placed opposite O(6)-BnG and O(6)-MeG. Interestingly, Benzi was extended with high fidelity by Dpo4 when it was paired opposite O(6)-BnG and O(6)-MeG but not opposite G. These results indicate that hydrogen bonding is an important noncovalent interaction that influences the fidelity and efficiency of Dpo4 to perform high-fidelity O(6)-alkylguanine PLS.

Engineered DNA polymerases continue to be the workhorses of many applications in biotechnology, medicine and nanotechnology. However, the dynamic interplay between the enzyme and the DNA remains unclear. In this study, we performed an extensive replica exchange with flexible tempering (REFT) molecular dynamics simulation of the ternary replicating complex of the archaeal family B DNA polymerase from the thermophile Thermococcus gorgonarius, right before the chemical step. The convoluted dynamics of the enzyme are reducible to rigid-body motions of six subdomains. Upon binding to the enzyme, the DNA double helix conformation changes from a twisted state to a partially untwisted state. The twisted state displays strong bending motion, whereby the DNA oscillates between a straight and a bent conformation. The dynamics of double-stranded DNA are strongly correlated with rotations of the thumb toward the palm, which suggests an assisting role of the enzyme during DNA translocation. In the complex, the primer-template duplex displays increased preference for the B-DNA conformation at the n-2 and n-3 dinucleotide steps. Interactions at the primer 3' end indicate that Thr541 and Asp540 are the acceptors of the first proton transfer in the chemical step, whereas in the translocation step both residues hold the primer 3' terminus in the vicinity of the priming site, which is crucial for high processivity., (© 2013.)

DNA replication initiates at defined sites called origins, which serve as binding sites for initiator proteins that recruit the replicative machinery. Origins differ in number and structure across the three domains of life and their properties determine the dynamics of chromosome replication. Bacteria and some archaea replicate from single origins, whereas most archaea and all eukaryotes replicate using multiple origins. Initiation mechanisms that rely on homologous recombination operate in some viruses. Here we show that such mechanisms also operate in archaea. We use deep sequencing to study replication in Haloferax volcanii and identify four chromosomal origins of differing activity. Deletion of individual origins results in perturbed replication dynamics and reduced growth. However, a strain lacking all origins has no apparent defects and grows significantly faster than wild type. Origin-less cells initiate replication at dispersed sites rather than at discrete origins and have an absolute requirement for the recombinase RadA, unlike strains lacking individual origins. Our results demonstrate that homologous recombination alone can efficiently initiate the replication of an entire cellular genome. This raises the question of what purpose replication origins serve and why they have evolved.

Replicative DNA polymerases use a complex, multistep mechanism for efficient and accurate DNA replication as uncovered by intense kinetic and structural studies. Recently, single-molecule fluorescence spectroscopy has provided new insights into real time conformational dynamics utilized by DNA polymerases during substrate binding and nucleotide incorporation. We have used single-molecule Förster resonance energy transfer techniques to investigate the kinetics and conformational dynamics of Sulfolobus solfataricus DNA polymerase B1 (PolB1) during DNA and nucleotide binding. Our experiments demonstrate that this replicative polymerase can bind to DNA in at least three conformations, corresponding to an open and closed conformation of the finger domain as well as a conformation with the DNA substrate bound to the exonuclease active site of PolB1. Additionally, our results show that PolB1 can transition between these conformations without dissociating from a primer-template DNA substrate. Furthermore, we show that the closed conformation is promoted by a matched incoming dNTP but not by a mismatched dNTP and that mismatches at the primer-template terminus lead to an increase in the binding of the DNA to the exonuclease site. Our analysis has also revealed new details of the biphasic dissociation kinetics of the polymerase-DNA binary complex. Notably, comparison of the results obtained in this study with PolB1 with those from similar single-molecule studies with an A-family DNA polymerase suggests mechanistic differences between these polymerases. In summary, our findings provide novel mechanistic insights into protein conformational dynamics and substrate binding kinetics of a high fidelity B-family DNA polymerase.

DNA replication plays an essential role in all life forms. Research on archaeal DNA replication began approximately 20 years ago. Progress was hindered, however, by the lack of genetic tools to supplement the biochemical and structural studies. This has changed, however, and genetic approaches are now available for several archaeal species. One of these organisms is the thermophilic euryarchaeon Thermococcus kodakarensis. In the present paper, the recent developments in the biochemical, structural and genetic studies on the replication machinery of T. kodakarensis are summarized.

Differentiation of binding accurate DNA replication polymerases over error prone DNA lesion bypass polymerases is essential for the proper maintenance of the genome. The hyperthermophilic archaeal organism Sulfolobus solfataricus (Sso) contains both a B-family replication (Dpo1) and a Y-family repair (Dpo4) polymerase and serves as a model system for understanding molecular mechanisms and assemblies for DNA replication and repair protein complexes. Protein cross-linking, isothermal titration calorimetry, and analytical ultracentrifugation have confirmed a previously unrecognized dimeric Dpo4 complex bound to DNA. Binding discrimination between these polymerases on model DNA templates is complicated by the fact that multiple oligomeric species are influenced by concentration and temperature. Temperature-dependent fluorescence anisotropy equilibrium binding experiments were used to separate discrete binding events for the formation of trimeric Dpo1 and dimeric Dpo4 complexes on DNA. The associated equilibria are found to be temperature-dependent, generally leading to improved binding at higher temperatures for both polymerases. At high temperatures, DNA binding of Dpo1 monomer is favored over binding of Dpo4 monomer, but binding of Dpo1 trimer is even more strongly favored over binding of Dpo4 dimer, thus providing thermodynamic selection. Greater processivities of nucleotide incorporation for trimeric Dpo1 and dimeric Dpo4 are also observed at higher temperatures, providing biochemical validation for the influence of tightly bound oligomeric polymerases. These results separate, quantify, and confirm individual and sequential processes leading to the formation of oligomeric Dpo1 and Dpo4 assemblies on DNA and provide for a concentration- and temperature-dependent discrimination of binding undamaged DNA templates at physiological temperatures.

RecQ family helicases and topoisomerase 3 enzymes form evolutionary conserved complexes that play essential functions in DNA replication, recombination, and repair, and in vitro, show coordinate activities on model recombination and replication intermediates. Malfunctioning of these complexes in humans is associated with genomic instability and cancer-prone syndromes. Although both RecQ-like and topoisomerase 3 enzymes are present in archaea, only a few of them have been studied, and no information about their functional interaction is available. We tested the combined activities of the RecQ-like helicase, Hel112, and the topoisomerase 3, SsTop3, from the thermophilic archaeon Sulfolobus solfataricus. Hel112 showed coordinate DNA unwinding and annealing activities, a feature shared by eukaryotic RecQ homologs, which resulted in processing of synthetic Holliday junctions and stabilization of model replication forks. SsTop3 catalyzed DNA relaxation and annealing. When assayed in combination, SsTop3 inhibited the Hel112 helicase activity on Holliday junctions and stimulated formation and stabilization of such structures. In contrast, Hel112 did not affect the SsTop3 DNA relaxation activity. RecQ-topoisomerase 3 complexes show structural similarity with the thermophile-specific enzyme reverse gyrase, which catalyzes positive supercoiling of DNA and was suggested to play a role in genome stability at high temperature. Despite such similarity and the high temperature of reaction, the SsTop3-Hel112 complex does not induce positive supercoiling and is thus likely to play different roles. We propose that the interplay between Hel112 and SsTop3 might regulate the equilibrium between recombination and anti-recombination activities at replication forks.

Analyses of the DNA replication-associated proteins of hyperthermophilic archaea have yielded considerable insight into the structure and biochemical function of these evolutionarily conserved factors. However, little is known about the regulation and progression of DNA replication in the context of archaeal cells. In the current work, we describe the generation of strains of Sulfolobus solfataricus and Sulfolobus acidocaldarius that allow the incorporation of nucleoside analogues during DNA replication. We employ this technology, in conjunction with immunolocalization analyses of replisomes, to investigate the sub-cellular localization of nascent DNA and replisomes. Our data reveal a peripheral localization of replisomes in the cell. Furthermore, while the two replication forks emerging from any one of the three replication origins in the Sulfolobus chromosome remain in close proximity, the three origin loci are separated.

In most organisms, DNA replication is initiated by DNA primases, which synthesize primers that are elongated by DNA polymerases. In this study, we describe the isolation and biochemical characterization of the DNA primase complex and its subunits from the archaeon Thermococcus kodakaraensis. The T. kodakaraensis DNA primase complex is a heterodimer containing stoichiometric levels of the p41 and p46 subunits. The catalytic activity of the complex resides within the p41 subunit. We show that the complex supports both DNA and RNA synthesis, whereas the p41 subunit alone marginally produces RNA and synthesizes DNA chains that are longer than those formed by the complex. We report that the T. kodakaraensis primase complex preferentially interacts with dNTP rather than ribonucleoside triphosphates and initiates RNA as well as DNA chains de novo. The latter findings indicate that the archaeal primase complex, in contrast to the eukaryote homolog, can initiate DNA chain synthesis in the absence of ribonucleoside triphosphates. DNA primers formed by the archaeal complex can be elongated extensively by the T. kodakaraensis DNA polymerase (Pol) B, whereas DNA primers formed by the p41 catalytic subunit alone were not. Supplementation of reactions containing the p41 subunit with the p46 subunit leads to PolB-catalyzed DNA synthesis. We also established a rolling circle reaction using a primed 200-nucleotide circle as the substrate. In the presence of the T. kodakaraensis minichromosome maintenance (MCM) 3' → 5' DNA helicase, PolB, replication factor C, and proliferating cell nuclear antigen, long leading strands (>10 kb) are produced. Supplementation of such reactions with the DNA primase complex supported lagging strand formation as well.

Archaea, the third domain of life, are interesting organisms to study from the aspects of molecular and evolutionary biology. Archaeal cells have a unicellular ultrastructure without a nucleus, resembling bacterial cells, but the proteins involved in genetic information processing pathways, including DNA replication, transcription, and translation, share strong similarities with those of Eukaryota. Therefore, archaea provide useful model systems to understand the more complex mechanisms of genetic information processing in eukaryotic cells. Moreover, the hyperthermophilic archaea provide very stable proteins, which are especially useful for the isolation of replisomal multicomplexes, to analyze their structures and functions. This review focuses on the history, current status, and future directions of archaeal DNA replication studies.

The intrinsically thermostable Y-family DNA polymerases of Sulfolobus spp. have revealed detailed three-dimensional structure and catalytic mechanisms of trans-lesion DNA polymerases, yet their functions in maintaining their native genomes remain largely unexplored. To identify functions of the Y-family DNA polymerase Dbh in replicating the Sulfolobus genome under extreme conditions, we disrupted the dbh gene in Sulfolobus acidocaldarius and characterized the resulting mutant strains phenotypically. Disruption of dbh did not cause any obvious growth defect, sensitivity to any of several DNA-damaging agents, or change in overall rate of spontaneous mutation at a well-characterized target gene. Loss of dbh did, however, cause significant changes in the spectrum of spontaneous forward mutation in each of two orthologous target genes of different sequence. Relative to wild-type strains, dbh(-) constructs exhibited fewer frame-shift and other small insertion-deletion mutations, but exhibited more base-pair substitutions that converted G:C base pairs to T:A base pairs. These changes, which were confirmed to be statistically significant, indicate two distinct activities of the Dbh polymerase in Sulfolobus cells growing under nearly optimal culture conditions (78-80°C and pH 3). The first activity promotes slipped-strand events within simple repetitive motifs, such as mononucleotide runs or triplet repeats, and the second promotes insertion of C opposite a potentially miscoding form of G, thereby avoiding G:C to T:A transversions., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Chromosomal DNA replication requires one daughter strand-the lagging strand-to be synthesised as a series of discontinuous, RNA-primed Okazaki fragments, which must subsequently be matured into a single covalent DNA strand. Here, we describe the reconstitution of Okazaki fragment maturation in vitro using proteins derived from the archaeon Sulfolobus solfataricus. Six proteins are necessary and sufficient for coupled DNA synthesis, RNA primer removal and DNA ligation. PolB1, Fen1 and Lig1 provide the required catalytic activities, with coordination of their activities dependent upon the DNA sliding clamp, proliferating cell nuclear antigen (PCNA). S. solfataricus PCNA is a heterotrimer, with each subunit having a distinct specificity for binding PolB1, Fen1 or Lig1. Our data demonstrate that the most efficient coupling of activities occurs when a single PCNA ring organises PolB1, Fen1 and Lig1 into a complex.

The initiation of DNA replication in most archaeal genomes is mediated by proteins related to eukaryotic Orc1 and Cdc6. Archaeal replication origins have been mapped and their interactions with Orc1/Cdc6 proteins have been characterized at the biochemical level. Structural and biophysical studies have revealed the basic rules of sequence recognition by archaeal initiators.

Eukaryotic chromosomal DNA replication is controlled by a highly ordered series of steps involving multiple proteins at replication origins. The eukaryotic GINS complex is essential for the establishment of DNA replication forks and replisome progression. GINS is one of the core components of the eukaryotic replicative helicase, the CMG (Cdc45-MCM-GINS) complex, which unwinds duplex DNA ahead of the moving replication fork. Eukaryotic GINS also links with other key proteins at the fork to maintain an active replisome progression complex. Archaeal GINS homologues play a central role in chromosome replication by associating with other replisome components. This chapter focuses on the molecular events related with DNA replication initiation, and summarizes our current understanding of the function, structure and evolution of the GINS complex in eukaryotes and archaea.

Minichromosome maintenance (MCM) complexes have been identified as the primary replicative helicases responsible for unwinding DNA for genome replication. The focus of this chapter is to discuss the current structural and functional understanding of MCMs and their role at origins of replication, which are based mostly on the studies of MCM proteins and MCM complexes from archaeal genomes.

The eukaryotic GINS heterotetramer, consisting of Sld5, Psf1, Psf2, and Psf3, participates in "CMG complex" formation with mini-chromosome maintenance (MCM) and Cdc45 as a key component of a replicative helicase. There are only two homologs of the GINS proteins in Archaea, and these proteins, Gins51 and Gins23, form a heterotetrameric GINS with a 2:2 molar ratio. The Pyrococcus furiosus GINS stimulates the ATPase and helicase activities of its cognate MCM, whereas the Sulfolobus solfataricus GINS does not affect those activities of its cognate MCM, although the proteins bind each other. Intriguingly, Thermoplasma acidophilum, as well as many euryarchaea, have only one gene encoding the sequence homologous to that of archaeal Gins protein (Gins51) on the genome. In this study, we investigated the biochemical properties of the gene product (TaGins51). A gel filtration and electron microscopy revealed that TaGins51 forms a homotetramer. A physical interaction between TaGins51 and TaMcm was detected by a surface plasmon resonance analysis. Unexpectedly, TaGins51 inhibited the ATPase activity, but did not affect the helicase activity of its cognate MCM. These results suggest that another factor is required to form a stable helicase complex with MCM and GINS at the replication fork in T. acidophilum cells.

This report shows that isochore-like structures can be found not only in warm-blooded animals, some reptiles, fishes and yeast, but also in certain archaeal species. In perfectly shaped isochore-like structures (in "protoisochores") from Sulfolobus acidocaldarius and Thermofilum pendens genomes the difference in 3GC levels between genes from different "protoisochores" is about 30%. In these archaeal species GC-poor "protoisochores" are situated near the origin of replication, while GC-rich "protoisochores" are situated near the terminus of replication. There is a strong linear dependence between position of a gene and its 3GC level in S. acidocaldarius (an average difference in 3GC per 100,000 base pairs is equal to 3.6%). Detailed analyses of nucleotide usage biases in genes from leading and lagging strands led us to the suggestion that 3GC in genes situated near terminus of replication grows due to higher rates of thymine oxidation producing T to C transitions in lagging strands., (Copyright © 2010 Elsevier Masson SAS. All rights reserved.)

Y-family DNA polymerases bypass Pt-GG, the cisplatin-DNA double-base lesion, contributing to the cisplatin resistance in tumour cells. To reveal the mechanism, we determined three structures of the Y-family DNA polymerase, Dpo4, in complex with Pt-GG DNA. The crystallographic snapshots show three stages of lesion bypass: the nucleotide insertions opposite the 3'G (first insertion) and 5'G (second insertion) of Pt-GG, and the primer extension beyond the lesion site. We observed a dynamic process, in which the lesion was converted from an open and angular conformation at the first insertion to a depressed and nearly parallel conformation at the subsequent reaction stages to fit into the active site of Dpo4. The DNA translocation-coupled conformational change may account for additional inhibition on the second insertion reaction. The structures illustrate that Pt-GG disturbs the replicating base pair in the active site, which reduces the catalytic efficiency and fidelity. The in vivo relevance of Dpo4-mediated Pt-GG bypass was addressed by a dpo-4 knockout strain of Sulfolobus solfataricus, which exhibits enhanced sensitivity to cisplatin and proteomic alterations consistent with genomic stress.

The domain Archaea is composed of several subdomains, and prominent among them are the Crenarchaeota and the Euryarchaeota. Biochemically characterized archaeal family Y DNA polymerases (Pols) or DinB homologs, to date, are all from crenarchaeal organisms, especially the genus Sulfolobus. Here, we demonstrate that archaeal family Y Pols fall into five clusters based on phylogenetic analysis. MacDinB-1, the homolog from the euryarchaeon Methanosarcina acetivorans that is characterized in this study, belongs to cluster II. Therefore, MacDinB-1 is different from the Sulfolobus DinB proteins, which are members of cluster I. In addition to translesion DNA synthesis activity, MacDinB-1 synthesized unusually long products ( approximately 7.2 kb) in the presence of its cognate proliferating cell nuclear antigen (PCNA). The PCNA-interacting site in MacDinB-1 was identified by mutational analysis in a C-terminally located heptapeptide akin to a PIP (PCNA-interacting protein) box. In vitro assays from the present report suggested that MacDinB-1 works in an error-free mode to repair cyclobutane pyrimidine dimers. This study on a euryarchaeal DinB homolog provides important insights into the functional diversity of the family Y Pols, and the availability of a genetic system for this archaeon should allow subsequent elucidation of the physiological significance of this enzyme in M. acetivorans cells., (Copyright (c) 2010 Elsevier Ltd. All rights reserved.)

The initiation step is a key process to regulate the frequency of DNA replication. Although recent studies in Archaea defined the origin of DNA replication (oriC) and the Cdc6/Orc1 homolog as an origin recognition protein, the location and mechanism of duplex opening have remained unclear. We have found that Cdc6/Orc1 binds to oriC and unwinds duplex DNA in the hyperthermophilic archaeon Pyrococcus furiosus, by means of a P1 endonuclease assay. A primer extension analysis further revealed that this localized unwinding occurs in the oriC region at a specific site, which is 12-bp long and rich in adenine and thymine. This site is different from the predicted duplex unwinding element (DUE) that we reported previously. We also discovered that Cdc6/Orc1 induces topological changes in supercoiled oriC DNA, and that this process is dependent on the AAA+ domain. These results indicate that topological alterations of oriC DNA by Cdc6/Orc1 introduce a single-stranded region at the 12-mer site, that could possibly serve as an entry point for Mcm helicase.

The accuracy of DNA synthesis by DNA polymerase B1 from the hyperthermophilic archaeon Sulfolobus solfataricus (Sso pol B1) at near the physiological temperature was investigated using M13-based mutational assays. Sso pol B1 showed replication fidelity similar to or higher than most viral, bacterial, and eukaryotic replicases. The fidelity of the enzyme was about three times as high at 70 degrees C as at 55 degrees C. Approximately two-thirds of the errors made by the enzyme were single-base substitutions, of which 58% were C --> T transition. Frameshift mutations, mostly resulting from single-base deletions, accounted for 19% of the total errors. An exonuclease-deficient mutant of Sso pol B1 was three times as mutagenic as the wild-type enzyme, suggesting that the intrinsic proofreading function contributed only modestly to the fidelity of the enzyme. Kinetic assays showed that the frequencies of all possible misincorporations by an exonuclease-deficient triple-point mutant of Sso pol B1 ranged from 5.4 x 10(-5) to 4.6 x 10(-4). The high fidelity of this enzyme in DNA synthesis was based primarily on K (m) difference rather than V (max) difference. These properties of Sso pol B1 are consistent with the proposed role of the enzyme as a replicase in S. solfataricus.

During chromosomal DNA replication, the replicative helicase unwinds the duplex DNA to provide the single-stranded DNA substrate for the polymerase. In archaea, the replicative helicase is the minichromosome maintenance (MCM) complex. The enzyme utilizes the energy of ATP hydrolysis to translocate along one strand of the duplex and unwind the complementary strand. Much progress has been made in elucidating structure and function since the first report on the biochemical properties of an archaeal MCM protein in 1999. We now know the biochemical and structural properties of the enzyme from several archaeal species and some of the mechanisms by which the enzyme is regulated. This review summarizes recent studies on the archaeal MCM protein and discusses the implications for helicase function and DNA replication in archaea.

In contrast to replicative DNA polymerases, Sulfolobus solfataricus Dpo4 showed a limited decrease in catalytic efficiency (k(cat)/Km) for insertion of dCTP opposite a series of N2-alkylguanine templates of increasing size from (methyl (Me) to (9-anthracenyl)-Me (Anth)). Fidelity was maintained with increasing size up to (2-naphthyl)-Me (Naph). The catalytic efficiency increased slightly going from the N2-NaphG to the N2-AnthG substrate, at the cost of fidelity. Pre-steady-state kinetic bursts were observed for dCTP incorporation throughout the series (N2-MeG to N2-AnthG), with a decrease in the burst amplitude and k(pol), the rate of single-turnover incorporation. The pre-steady-state kinetic courses with G and all of the six N2-alkyl G adducts could be fit to a general DNA polymerase scheme to which was added an inactive complex in equilibrium with the active ternary Dpo4.DNA.dNTP complex, and only the rates of equilibrium with the inactive complex and phosphodiester bond formation were altered. Two crystal structures of Dpo4 with a template N2-NaphG (in a post-insertion register opposite a 3'-terminal C in the primer) were solved. One showed N2-NaphG in a syn conformation, with the naphthyl group located between the template and the Dpo4 "little finger" domain. The Hoogsteen face was within hydrogen bonding distance of the N4 atoms of the cytosine opposite N2-NaphG and the cytosine at the -2 position. The second structure showed N2-Naph G in an anti conformation with the primer terminus largely disordered. Collectively these results explain the versatility of Dpo4 in bypassing bulky G lesions.

Bi-directionality is a common feature observed for genomic replication for all three phylogenetic kingdoms: Eubacteria, Archaea, and Eukaryotes. A consequence of bi-directional replication, where the two replication forks initiated at an origin move away from each other, is that the replication termination will occur at positions away from the origin sequence(s). The replication termination processes are therefore physically and mechanistically dissociated from the replication initiation. The replication machinery is a highly processive complex that in short time copies huge numbers of bases while competing for the DNA substrate with histones, transcription factors, and other DNA-binding proteins. Importantly, the replication machinery generally wins out; meanwhile, when converging forks meet termination occurs, thus preventing over-replication and genetic instability. Very different scenarios for the replication termination processes have been described for the three phylogenetic kingdoms. In eubacterial genomes replication termination is site specific, while in archaea and eukaryotes termination is thought to occur randomly within zones where converging replication forks meet. However, a few site-specific replication barrier elements that mediate replication termination have been described in eukaryotes. This review gives an overview about what is known about replication termination, with a focus on these natural site-specific replication termination sites.

DNA replication is fundamental to cellular life on earth, and replication initiation provides the primary point of control over this process. Replication initiation in all organisms involves the interaction of initiator proteins with one or more origins of replication in the DNA, with subsequent regulated assembly of two replisome complexes at each origin, melting of the DNA, and primed initiation of DNA synthesis on leading and lagging strands. Archaea and Eukarya share homologous systems for DNA replication initiation, but differ in the complexity of these; Bacteria appear to have analogous, rather than homologous, mechanisms for replication initiation. This chapter provides an overview of current knowledge of initiation of chromosomal DNA replication in the three domains of life.

Methanosarcina barkeri is capable of synthesizing large amounts of corrinoids, compounds of the vitamin B12 group, although not cobalamin. In the present work, exogenous cobalamin was demonstrated to upregulate DNA synthesis in M. harkeri cell suspensions incubated under air. The effect is similar to the one in Propionibacterium freudenreichii cells, though less pronounced. The growth of the archaeon under anaerobic conditions was shown to be suppressed by cobalamin and 5,6-dimethylbenzimidazole. The data obtained suggest the presence of a corrinoid-dependent ribonucleotide reductase in the archaeon cells which provides for deoxyribose precursors for DNA biosynthesis independently of the presence of molecular oxygen in the medium. Growth suppression under anoxic conditions by cobalamin and 5,6-dimethylbenzimidazole may be due to a decrease in the concentration of factor III, a polyfunctional corrinoid dominating in M. barkeri cells.

Previous work has shown that Sulfolobus solfataricus DNA polymerase Dpo4-catalyzed bypass of O(6)-methylguanine (O(6)-MeG) proceeds largely in an accurate but inefficient manner with a "wobble" base pairing between C and O(6)-MeG (Eoff, R. L., Irimia, A., Egli, M., and Guengerich, F. P. (2007) J. Biol. Chem. 282, 1456-1467). We considered here the bulky lesion O(6)-benzylguanine (O(6)-BzG) in DNA and catalysis by Dpo4. Mass spectrometry analysis of polymerization products revealed that the enzyme bypasses and extends across from O(6)-BzG, with C the major product ( approximately 70%) and some T and A ( approximately 15% each) incorporated opposite the lesion. Steady-state kinetic parameters indicated that Dpo4 was 7-, 5-, and 27-fold more efficient at C incorporation opposite O(6)-BzG than T, A, or G, respectively. In transient state kinetic analysis, the catalytic efficiency was decreased 62-fold for C incorporation opposite O(6)-BzG relative to unmodified DNA. Crystal structures reveal wobble pairing between C and O(6)-BzG. Pseudo-"Watson-Crick" pairing was observed between T and O(6)-BzG. Two other structures illustrate a possible mechanism for the accommodation of a +1 frameshift in the Dpo4 active site. The overall effect of O(6)-BzG is to decrease the efficiency of bypass by roughly an order of magnitude in every case except correct bypass, where the effect is not as pronounced. By comparison, Dpo4 is more accurate but no more efficient than model replicative polymerases, such as bacteriophage T7(-) DNA polymerase and human immunodeficiency virus-1 reverse transcriptase in the polymerization past O(6)-MeG and O(6)-BzG.

Proliferating cell nuclear antigen (PCNA) is a well-known multifunctional protein involved in eukaryotic and archaeal DNA transactions. The homotrimeric PCNA ring encircles double-stranded DNA within its central hole and tethers many proteins on DNA. Plural genes encoding PCNA-like proteins have been found in the genome sequence of crenarchaeal organisms. We describe here the biochemical properties of the three PCNAs, PCNA1, PCNA2 and PCNA3, from the hyperthermophilic archaeon, Aeropyrum pernix. PCNA2 can form a trimeric structure by itself, and it also forms heterotrimeric structures with PCNA1 and PCNA3. However, neither PCNA1 nor PCNA3 can form homotrimers. The DNA synthesis activity of DNA polymerase I and II, the endonuclease activity of FEN1, and the nick-sealing activity of DNA ligase were stimulated by the complex of PCNA2 and 3 or PCNA1, 2 and 3. These results suggest that the heterotrimeric PCNA at least including PCNA2 and 3 function as the clamp in the replisome. However, PCNA2 is the most abundant in the cells throughout the growth stages among the three PCNAs, and therefore, PCNA2 may perform multitasks by changing complex composition.

The archaeal DNA replication machinery bears striking similarity to that of eukaryotes and is clearly distinct from the bacterial apparatus. In recent years, considerable advances have been made in understanding the biochemistry of the archaeal replication proteins. Furthermore, a number of structures have now been obtained for individual components and higher-order assemblies of archaeal replication factors, yielding important insights into the mechanisms of DNA replication in both archaea and eukaryotes.

The Sulfolobus spindle virus, SSV2, encodes a tyrosine integrase which furthers provirus formation in host chromosomes. Consistently with the prediction made during sequence analysis, integration was found to occur in the downstream half of the tRNA(Gly) (CCC) gene. In this paper we report the findings of a comparative study of SSV2 physiology in the natural host, Sulfolobus islandicus REY15/4, versus the foreign host, Sulfolobus solfataricus, and provide evidence of differently regulated SSV2 life cycles in the two hosts. In fact, whereas a significant induction of SSV2 replication takes place during the growth of the natural host REY15/4, the cellular content of SSV2 DNA remains fairly low throughout the incubation of the foreign host. The accumulation of episomal DNA in the former case cannot be traced to decreased packaging activity because of a simultaneous increase in the virus titre in the medium. In addition, the interaction between SSV2 and its natural host is characterized by the concurrence of host growth inhibition and the induction of viral DNA replication. When this virus-host interaction was investigated using S. islandicus REY15A, a strain which is closely related to the natural host, it was found that the SSV2 replication process was induced in the same way as in the natural host REY15/4.

In the three domains of life, the archaea, bacteria, and eukarya, there are two general lineages of DNA replication proteins: the bacterial and the eukaryal/archaeal lineages. The hyperthermophilic archaeon Sulfolobus solfataricus provides an attractive model for biochemical study of DNA replication. Its relative simplicity in both genomic and biochemical contexts, together with high protein thermostability, has already provided insight into the function of the more complex yet homologous molecules of the eukaryotic domain. Here, we provide an overview of recent insights into the functioning of the chromosome replication machinery of S. solfataricus, focusing on some of the relatively well characterized core components that act at the DNA replication fork.

The Cdc6 proteins from the archaeon Methanothermobacter thermautotrophicus were previously shown to bind double-stranded DNA. It is shown here that the proteins also bind single-stranded DNA. Using minichromosome maintenance (MCM) helicase mutant proteins unable to bind DNA, it was found that the interaction of MCM with Cdc6 inhibits the DNA binding activity of Cdc6.

The possible conformational changes of DNA polymerase IV (Dpo4) before and after the nucleotidyl-transfer reaction are investigated at the atomic level by dynamics simulations to gain insight into the mechanism of low-fidelity polymerases and identify slow and possibly critical steps. The absence of significant conformational changes in Dpo4 before chemistry when the incoming nucleotide is removed supports the notion that the "induced-fit" mechanism employed to interpret fidelity in some replicative and repair DNA polymerases does not exist in Dpo4. However, significant correlated movements in the little finger and finger domains, as well as DNA sliding and subtle catalytic-residue rearrangements, occur after the chemical reaction when both active-site metal ions are released. Subsequently, Dpo4's little finger grips the DNA through two arginine residues and pushes it forward. These metal ion correlated movements may define subtle, and possibly characteristic, conformational adjustments that operate in some Y-family polymerase members in lieu of the prominent subdomain motions required for catalytic cycling in other DNA polymerases like polymerase beta. Such subtle changes do not easily provide a tight fit for correct incoming substrates as in higher-fidelity polymerases, but introduce in low-fidelity polymerases different fidelity checks as well as the variable conformational-mobility potential required to bypass different lesions.

We describe a CCCH type of zinc finger domain in a replication protein A (RPA) homolog found in members of different lineages of the Euryarchaeota, a subdomain of Archaea. The zinc finger is characterized by CX(2)CX(8)CX(2)H, where X is any amino acid. Using MacRPA3, a representative of this new group of RPA in Methanosarcina acetivorans, we made two deletion mutants: a C-terminal deletion mutant lacking the zinc finger and an N-terminal deletion mutant containing the zinc finger domain. Whereas the N-terminal deletion mutant contained zinc at a level comparable to the wild-type protein level, the C-terminal deletion mutant was devoid of zinc. We further created four different mutants of MacRPA3 by replacing each of the four invariable amino acids in the zinc finger with alanine. Each single mutation at an invariable position resulted in a protein containing less than 35% of the zinc found in the wild-type protein. Circular dichroism spectra suggested that although the mutation at the first cysteine resulted in minor perturbation of protein structure, mutations at the other invariable positions led to larger structural changes. All proteins harboring a mutation at one of the invariable positions bound to single-stranded DNA weakly, and this translated into reduced capacity to stimulate DNA synthesis by M. acetivorans DNA polymerase BI. By subjecting the protein and its mutants to oxidizing and reducing conditions, we demonstrated that ssDNA binding by MacRPA3 may be regulated by redox through the zinc finger. Thus, the zinc finger modules in euryarchaeal RPA proteins may serve as a means by which the function of these proteins is regulated in the cell.

DNA polymerases carry out DNA synthesis during DNA replication, DNA recombination and DNA repair. During the past five years, the number of DNA polymerases in both eukarya and bacteria has increased to at least 19 and multiple biological roles have been assigned to many DNA polymerases. Archaea, the third domain of life, on the other hand, have only a subset of the eukaryotic-like DNA polymerases. The diversity among the archaeal DNA polymerases poses the intriguing question of their functional tasks. Here, we focus on the two identified DNA polymerases, the family B DNA polymerase B (PabpolB) and the family D DNA polymerase D (PabpolD) from the hyperthermophilic euryarchaeota Pyrococcus abyssi. Our data can be summarized as follows: (i) both Pabpols are DNA polymerizing enzymes exclusively; (ii) their DNA binding properties as tested in gel shift competition assays indicated that PabpolD has a preference for a primed template; (iii) PabPolD is a primer-directed DNA polymerase independently of the primer composition whereas PabpolB behaves as an exclusively DNA primer-directed DNA polymerase; (iv) PabPCNA is required for PabpolD to perform efficient DNA synthesis but not PabpolB; (v) PabpolD, but not PabpolB, contains strand displacement activity; (vii) in the presence of PabPCNA, however, both Pabpols D and B show strand displacement activity; and (viii) we show that the direct interaction between PabpolD and PabPCNA is DNA-dependent. Our data imply that PabPolD might play an important role in DNA replication likely together with PabpolB, suggesting that archaea require two DNA polymerases at the replication fork.

Sulfolobus solfataricus P2 DNA polymerase IV (Dpo4) is a thermostable archaeal enzyme and a member of the error-prone and lesion-bypass Y-family. In this paper, for the first time, the fidelity of a Y-family polymerase, Dpo4, was determined using pre-steady-state kinetic analysis of the incorporation of a single nucleotide into an undamaged DNA substrate 21/41-mer at 37 degrees C. We assessed single-turnover (with Dpo4 in molar excess over DNA) saturation kinetics for all 16 possible nucleotide incorporations. The fidelity of Dpo4 was estimated to be in the range of 10(-3)-10(-4). Interestingly, the ground-state binding affinity of correct nucleotides (70-230 microM) is 10-50-fold weaker than those of replicative DNA polymerases. Such a low affinity is consistent with the lack of interactions between Dpo4 and the bound nucleotides as revealed in the crystal structure of Dpo4, DNA, and a matched nucleotide. The affinity of incorrect nucleotides for Dpo4 is approximately 2-10-fold weaker than that of correct nucleotides. Intriguingly, the mismatched dCTP has an affinity similar to that of the matched nucleotides when it is incorporated against a pyrimidine template base flanked by a 5'-template guanine. The incoming dCTP likely skips the first available template base and base pairs with the 5'-template guanine, as observed in the crystal structure of Dpo4, DNA, and a mismatched nucleotide. The mismatch incorporation rates, regardless of the 5'-template base, were approximately 2-3 orders of magnitude slower than the incorporation rates for matched nucleotides, which is the predominant contribution to the fidelity of Dpo4.

The kinetic mechanism of DNA polymerization catalyzed by Sulfolobus solfataricus P2 DNA polymerase IV (Dpo4) is resolved by pre-steady-state kinetic analysis of single-nucleotide (dTTP) incorporation into a DNA 21/41-mer. Like replicative DNA polymerases, Dpo4 utilizes an "induced-fit" mechanism to select correct incoming nucleotides. The affinity of DNA and a matched incoming nucleotide for Dpo4 was measured to be 10.6 nM and 230 microM, respectively. Dpo4 binds DNA with an affinity similar to that of replicative polymerases due to the presence of an atypical little finger domain and a highly charged tether that links this novel domain to its small thumb domain. On the basis of the elemental effect between the incorporations of dTTP and its thio analogue S(p)-dTTPalphaS, the incorporation of a correct incoming nucleotide by Dpo4 was shown to be limited by the protein conformational change step preceding the chemistry step. In contrast, the chemistry step limited the incorporation of an incorrect nucleotide. The measured dissociation rates of the enzyme.DNA binary complex (0.02-0.07 s(-1)), the enzyme.DNA.dNTP ternary complex (0.41 s(-1)), and the ternary complex after the protein conformational change (0.004 s(-1)) are significantly different and support the existence of a bona fide protein conformational change step. The rate-limiting protein conformational change was further substantiated by the observation of different reaction amplitudes between pulse-quench and pulse-chase experiments. Additionally, the processivity of Dpo4 was calculated to be 16 at 37 degrees C from analysis of a processive polymerization experiment. The structural basis for both the protein conformational change and the low processivity of Dpo4 was discussed.

DNA primases are essential components of the DNA replication apparatus in every organism. Reported here are the biochemical characteristics of a thermostable DNA primase from the thermophilic archaeon Pyrococcus horikoshii, which formed the oligomeric unit L(1)S(1) and synthesized long DNA primers 10 times more effectively than RNA primers. The N-terminal (25KL) and C-terminal halves (20KL) of the large subunit (L) play distinct roles in regulating de novo DNA synthesis of the small catalytic subunit (S). The 25KL domain has a dual function. One function is to depress the large affinity of the intrasubunit domain 20KL for the template DNA until complex (L(1)S(1) unit) formation. The other function is to tether the L subunit tightly to the S subunit, probably to promote effective interaction between the intrasubunit domain 20KL and the active center of the S subunit. The 20KL domain is a central factor to enhance the de novo DNA synthesis activity of the catalytic S subunit since the total affinity of the L(1)S(1) unit is mainly derived from the affinity of 20KL, which is elevated more than 10 times by the heterodimer formation, presumably due to the cancellation of the inhibitory activity of 25KL through tight binding to the S subunit.

We discovered a thermostable enzyme from the archaeon Pyrococcus furiosus (Pfu), which increases yields of PCR product amplified with Pfu DNA polymerase. A high molecular mass (>250 kDa) complex with PCR-enhancing activity was purified from Pfu extracts. The complex is a multimer of two discrete proteins, P45 and P50, with significant similarity to bacterial dCTP deaminase/dUTPase and DNA flavoprotein, respectively. When tested in PCR, only recombinant P45 exhibited enhancing activity. P45 was shown to function as a dUTPase, converting dUTP to dUMP and inorganic pyrophosphate. Pfu dUTPase improves the yield of products amplified with Pfu DNA polymerase by preventing dUTP incorporation and subsequent inhibition of the polymerase by dU-containing DNA. dUTP was found to accumulate during PCR through dCTP deamination and to limit the efficiency of PCRs carried out with archaeal DNA polymerases. In the absence of dUTP inhibition, the combination of cloned Pfu DNA polymerase and Pfu dUTPase (PfuTurbo DNA polymerase) can amplify longer targets in higher yield than Taq DNA polymerase. In vivo, archaeal dUTPases may play an essential role in preventing dUTP incorporation and inhibition of DNA synthesis by family B DNA polymerases.

Parazoanthoxanthin A is a fluorescent yellow nitrogenous pigment of the group of zoanthoxanthins, which show a broad range of biological activity. These include, among others, the ability to bind to DNA. In this study we have used a variety of spectroscopic (intrinsic fluorescence emission and UV-spectroscopy) and hydrodynamic techniques (viscometry) to characterize in more detail the binding of parazoanthoxanthin A to a variety of natural and synthetic DNA duplexes in different buffer conditions. Our results reveal the following five significant features: (i) Parazoanthoxanthin A exhibits two modes of DNA binding: One binding mode exhibits properties of intercalation, while the second binding mode is predominantly electrostatic in origin. (ii) The apparent binding "site size" for parazoanthoxanthin A near physiological salt concentration (100 mM NaCl) is in the range of 7 +/- 1 base pairs for natural genomic DNA duplexes (calf thymus and salmon testes DNA) and alternating synthetic polynucleotides (poly[d(AT)]. poly[d(AT)] and poly[d(GC)]. poly[d(GC)]). A slightly larger apparent binding site size of 9 +/- 1 bp was obtained for parazoanthoxanthin A binding to the synthetic homopolymer poly[d(A)]. poly[d(T)]. (iii) Near physiological salt concentration (100 mM NaCl) parazoanthoxanthin A binds with the same approximate binding affinity of 2-5 x 10(5) M(-1) to all DNA polymers studied. (iv) At low salt concentration, parazoanthoxanthin A preferentially binds alternating poly[d(AT)]. poly[d(AT)] and poly[d(GC)]. poly[d(GC)] host duplexes. (v) Parazoanthoxanthin A inhibits DNA polymerase in vitro., (Copyright 2001 Academic Press.)

The analysis of completed archaeal genome sequences led to the identification of a set of approximately 10-20 genes whose protein products were inferred to be involved in chromosomal DNA replication. Until recently, however, little was known of the biochemical properties of these proteins. Here, I review recent progress in this area brought about by biochemical and structural analysis. Aside from shedding considerable new light on the molecular machinery of DNA replication in the archaea, the results of these studies also present new opportunities for understanding the molecular events of chromosomal DNA replication in eukaryotic cells.

Comparison of the updated complete nucleotide sequences of the two related plasmids pME2001 and pME2200 from the thermophilic archaeon Methanothermobacter marburgensis (formerly Methanobacterium thermoautotrophicum) strains Marburg and ZH3, respectively, revealed an almost identical common backbone structure and five plasmid-specific inserted fragments (IFs), four of which are flanked by perfect or nearly perfect direct repeats 25-52 bp in length. A 4354-bp minimal replicon was derived from the alignment of the two plasmids, which encodes one putative antisense RNA related to replication control and five open reading frames (ORFs) organized in two operons. The first operon consists of four ORFs, the third of which, i.e. ORF3, contains a helix-turn-helix motif and a purine NTP-binding motif often found in proteins involved in DNA metabolic processes. The database search results suggest that ORF3 might function as a replication initiator protein. The large putative Rep protein encoded by pME2001 was overexpressed in Escherichia coli as an N-terminal His-tagged version using pET28a and a compatible helper plasmid that coexpresses minor tRNAs, argU and ileX to compensate for codon usage difference. ORFs 1, 2, and 3 are organized in a sequence reminiscent of that described in E. coli plasmids of the R1 family, cop-tap-rep. ORF6 encoded by IF1, one of the pME2200-specific elements, showed significant similarity to ORF6 encoded by archaeal phage psiM2 of M. marburgensis strain Marburg and may confer the apparent immunity of its host strain ZH3 to infection by phage psiM2. Our data indicate that M. marburgensis plasmids may evolve by a series of gene duplication and excision events., (Copyright 2001 Academic Press.)

DNA is replicated by DNA polymerase semiconservatively in many organisms. Accordingly, the replicated DNA does not become larger than the original DNA (template DNA), implying that replicative synthesis by DNA polymerase alone cannot explain the diversification of primordial simple DNA. We demonstrate that a single-stranded tandem repetitive oligodeoxyribonucleic acid (oligoDNA) composed of a palindromic or quasi-palindromic motif sequence and 25-50% GC content is elongated in vitro to more than 20,000 bases at 70-74 degrees C by the DNA polymerase of the hyperthermophilic archaeon Thermococcus litoralis without a bimolecular primer-template complex. The efficiency of elongation decreased when the palindromic structure of the oligoDNA was destroyed or when the GC content of the oligoDNA was outside the range of 25-50%. The thermal melting transition profile of the oligoDNA, as observed by ultraviolet spectroscopy, exhibited a biphasic curve, reflecting a duplex-hairpin transition at 31-40 degrees C and a hairpin-coil transition at 70-77 degrees C. The optimal reaction temperature for the elongation, for instance, of oligoDNA (AGATATCT)(6) (72 degrees C) was very close to its hairpin-coil transition melting temperature (70.4 degrees C), but was markedly higher than the temperature at which duplex oligoDNA can exist stably (<35.9 degrees C). These results suggest that a hairpin-based "intramolecular primer-template structure" is formed transiently in the oligoDNA, and it is elongated by the DNA polymerase to long DNA through repeated cycles of folding and melting of the hairpin structure. We discuss the implication of this phenomenon, "hairpin elongation", from the standpoint of potential amplification of simple DNA sequences during the evolution of the genome.

DNA replication is the process underlying evolution and the propagation of living organisms. Since the discovery of DNA-dependent DNA polymerases more than 40 years ago, the mechanisms governing DNA replication have been extensively studied in bacteria and eukarya. During the last several years, these studies have been extended to the third domain of life, the archaea. Although archaea are prokaryotes, their replication machinery and the proteins participating in the initiation of DNA replication are more similar to those found in eukarya than bacteria. It appears, however, that replication in archaea is a simpler version of the eukaryotic one as fewer polypeptides participate in each phase of the replication process. The archaeal replication apparatus also has several unique features not found in eukaryotic organisms. Furthermore, like bacteria, members of this domain thrive under a broad range of environmental conditions including extreme temperature, high salt, pH, etc. Thus, the replication machinery had to adapt to these extreme conditions. This article summarizes our current understanding of the mechanisms governing DNA replication in archaea and highlights similarities and differences between archaeal replication and that of bacteria and eukarya.