Search

The development of sustainable biorefineries and bioeconomy has been the mandate of most of the governments with major focus on restricting the climate change concerns and finding new strategies to maintain the global food supply chain. Xylooligosaccharides (XOS) are short-chain oligomers which due to their excellent prebiotic potential in the nutraceutical sector has attracted intense research focus in the recent years. The agro-industrial crop and food waste can be utilized for the production of XOS which are derived from hemicellulose fraction (xylan) of the lignocellulosic materials. The extraction of xylan, is traditionally achieved by acidic and alkaline pretreatments which, however, have limited industrial applications. The inclusion of cutting-edge and environmentally beneficial pretreatment methods and technologies such as deep eutectic solvents and green catalysts are preferred. Moreover, the extraction of xylans from biomass using combinatorial pretreatment approaches may help in economizing the whole bioprocess. The current review outlines the factors involved in the xylan extraction and depolymerization processes from different lignocellulosic biomass and the subsequent enzymatic hydrolysis for XOS production. The different types of oligosaccharides and their prebiotic potential for the growth of healthy gut bacteria have also been explained. The introduction of modern molecular technologies has also made it possible to identify enzymes and microorganisms with the desired characteristics for usage in XOS industrial production processes.

In this study, cereals with high starch content, including brown rice, corn, and buckwheat were pretreated by extrusion. The physicochemical properties of extruded-puffed cereals obtained from different extrusion conditions were analyzed herein. The puffed extrudates exhibited lower bulk density, higher water solubility and gelatinization as compared to untreated cereals. The FTIR-ATR results confirmed a decrease in the crystalline structure of extruded-puffed cereals. A higher Vmax/Km value was observed in the enzymatic saccharification of puffed extrudates that significantly improved hydrolysis rate and yield. Finally, the high-maltose syrup was produced via the enzymatic hydrolysis of extruded-puffed cereals at high substrate concentrations (20 %). After hydrolysis for 180 min at an enzyme substrate ratio (E/S ratio) of 0.2, the syrup with dextrose equivalent (DE) value of 63, 62, and 61 were obtained from extruded-puffed brown rice, corn, and buckwheat, respectively. Our results showed the potential of using extruded-puffed cereals for producing high-maltose syrup.

Fish bone fermented using Monascus purpureus (FBF) has total phenols and functional amino acids that contribute to its anti-oxidant and anti-inflammatory properties. Colorectal cancer, one of the most prevalent cancers and the third largest cause of death worldwide, has become a serious threat to global health. This study investigates the anti-cancer effects of FBF (1, 2.5 or 5 mg/mL) on the cell growth and molecular mechanism of HCT-116 cells. The HCT-116 cell treatment with 2.5 or 5 mg/mL of FBF for 24 h significantly decreased cell viability (p < 0.05). The S and G2/M phases significantly increased by 88–105% and 25–43%, respectively (p < 0.05). Additionally, FBF increased the mRNA expression of caspase 8 (38–77%), protein expression of caspase 3 (34–94%), poly (ADP-ribose) polymerase (PARP) (31–34%) and induced apoptosis (236–773%) of HCT-116 cells (p < 0.05). FBF also increased microtubule-associated protein 1B light chain 3 (LC3) (38–48%) and phosphoinositide 3 kinase class III (PI3K III) (32–53%) protein expression, thereby inducing autophagy (26–52%) of HCT-116 cells (p < 0.05). These results showed that FBF could inhibit HCT-116 cell growth by inducing S and G2/M phase arrest of the cell cycle, apoptosis and autophagy. Thus, FBF has the potential to treat colorectal cancer.

Abstract Macro- and microalgae-based foods are becoming popular due to their high nutritious value. The algal biomass is enriched with polysaccharides, protein, polyunsaturated fatty acids, carotenoids, vitamins and minerals. However, the most promising fraction is polysaccharides (PS) or their derivatives (as dietary fibers) which are not entirely fermented by colonic bacteria hence act as potential prebiotic. Primarily, algae become famous as prominent protein sources. Recently, these are widely adopted as functional food (e.g., desserts, dairy products, oil-derivatives, pastas etc.) or animal feed (for poultry, cattle, fish etc.). Besides prebiotic and balanced amino acids source, algae derived compounds implied as therapeutics due to comprising bioactive properties to elicit immunomodulatory, antioxidative, anticancerous, anticoagulant, hepato-protective, and antihypertensive responses. Despite the above potentials, broader research determinations are inevitable to explore these algal compounds until microalgae become a business reality for broader and specific applications in all health domains. However, scale up of algal bioprocess remains a major challenge until commercial affordability is accomplished which can be possible by discovering their hidden potentials and increasing their value and application prospects. This review provides an overview of the significance of algae consumption for several health benefits in humans and animals mainly as prebiotics, however their functional food and animal feed potential are briefly covered. Moreover, their potential to develop an algal-based food industry to meet the people's requirements not only as a sustainable food solution with several health benefits but also as therapeutics is inevitable.

The rising climate change concerns over the excessive exploitation of non-renewable sources have necessitated the need for alternative renewable and eco-friendly resources for the production of innovative materials, achieving the targets of bioeconomy. Lignocellulosic biomass (LB) constituted by polymeric sugars and lignin is an abundantly available plant-based renewable material in the form of agro-industrial food waste and crop residues that can be exploited for the production of an array of value-added chemicals and bioproducts. Cellulose is the most abundant natural and biodegradable organic polymer on earth derived from LB, with wide scale applications in the lignocellulosic biorefineries and food industries. The negative effects of food waste from agro-industrial activities could be reduced through the recovery of cellulose from these wastes and converting it into valuable forms. However, the extraction of cellulose from LB is a difficult task owing to the recalcitrant nature of biomass that restricts the easy accessibility of cellulose for value addition. Therefore, a suitable cellulose extraction method through the fractionation of LB is necessary for a better cellulose yield. Furthermore, owing to the enormous potential of nanocellulose (NC), researchers are keenly interested in developing ecologically acceptable cellulose extraction methods. Cellulose nanofibrils and nanocrystals confer excellent mechanical properties, non-toxic characteristics and biodegradability, due to which they possess wide-scale applications in diverse industrial sectors. The current review emphasizes the potential role of cellulose extraction and NC production from agro-food waste. The different pretreatment methods for their extraction from LB are outlined. The applications of nanocellulose in different areas are also discussed. The review also highlights the recent trends, challenges and future directions in the development of cellulose and NC-based commercial products.

Bioactive peptides derived from fish the byproduct protein hydrolysate have wide potential as functional food ingredients. The preparation of bioactive peptides is commonly achieved via enzymatic hydrolysis; this is the most preferred method because it has high specificity, fewer residual organic solvents in the product, and it is usually carried out in mild conditions. The use of various enzymes such as proteases is widely practiced in the industry, yet there are various limitations as it is of high cost and there is a limited availability of food-grade enzymes in the market. Moreover, high-throughput purification and the identification analysis of these peptides are currently being studied to further understand the functionality and characterization of the bioactive peptides. This review mainly focuses on the novel bioactive peptides derived from fish protein hydrolysates from various fish wastes and byproducts. The hydrolysis conditions, source of hydrolysate, and amino acid sequence of these novel peptides are presented, along with their corresponding methods of analysis in purification and identification. The use of various enzymes yields novel peptides with potent bioactivities, such as antiproliferative, antimicrobial, antihypertensive, antiglycemic, antitumor, and antioxidative biological functions. The increasing interest in proteomics in marine and aquatic waste utilization continues due to these products’ bioactivity and sustainability.

Biorefinery has emerged in recent years as an alternative to petrorefinery, as biofuels have all the potential to replace fossil fuels for the sustainable development of human society. From this aspect, lignocellulosic biomasses are the most important, since these are the most abundant ubiquitous most raw material on earth, which can be converted into biofuels such as bioethanol, biobutanol, biohydrogen, biogas, etc. There are several strategies for conversion, such as biochemical, thermochemical, and microbial conversions of biomasses to biofuels; however, each of the strategies has its own consequences. Enzymatic conversion of biomasses into sugars, and thereby into bioethanol, is considered as the most sustainable way. However, biomass recalcitrance to enzymatic hydrolysis is the biggest challenge, as cellulose, hemicellulose, and lignin are intricately attached to each other making their separation a tedious task. Pretreatment is necessary to partially remove or change the form of lignin to make cellulose and hemicellulose accessible to enzymes. Most of the pretreatment methods are designed to target lignin, as it is the major component responsible for recalcitrance nature of biomasses. Laccase is a versatile lignin-degrading or lignin-modifying enzyme which is secreted by filamentous fungi and bacteria, and is reported for the biological pretreatment of biomasses, which is the most sustainable way of pretreatment. However, the rate of the reaction is extremely slow making it less attractive. This article will give an insight into the biorefinery of biomasses, with the special significance to laccase.

The depletion of fossil fuels is resulting in an increased energy crisis, which is leading the paradigm shift towards alternative energy resources to overcome the issue. Lignocellulosic biomass or agricultural residue could be utilized to produce energy fuel (bioethanol) as it can resolve the issue of energy crisis and reduce environmental pollution that occurs due to waste generation from agriculture and food industries. A huge amount of sorghum distillery residue (SDR) is produced during the Kaoliang liquor production process, which may cause environmental problems. Therefore, the SDR generated can be utilized to produce bioethanol to meet current energy demands and resolve environmental problems. Using a central composite experimental design, the SDR was subjected to hydrothermal pretreatment. The conditions selected for hydrothermal pretreatment are 155 °C, 170 °C, and 185 °C for 10, 30, and 50 min, respectively. Based on the analysis, 150 °C for 30 min conditions for SDR hydrothermal pretreatment were selected as no dehydration product (Furfural and HMF) was detected in the liquid phase. Therefore, the pretreated slurry obtained using hydrothermal pretreatment at 150 °C for 30 min was subjected to enzymatic hydrolysis at 5% solid loading and 15 FPU/gds. The saccharification yield obtained at 72 h was 75.05 ± 0.5%, and 5.33 g/L glucose concentration. This non-conventional way of enzymatic hydrolysis eliminates the separation and detoxification process, favoring the concept of an economical and easy operational strategy in terms of biorefinery.

Being a lignocellulose-rich biomass, pineapple leaves waste (PL) could be a potential raw material for the production of biofuel, biochemicals, and other value-added products. The main aim of this study was to investigate the potential of pineapple leaves in the sustainable production of bioethanol via stepwise saccharification and fermentation. For this purpose, PL was subjected to hydrothermal pretreatment in a high-pressure reactor at 150 °C for 20 min without any catalyst, resulting in a maximum reducing sugar yield of 38.1 g/L in the liquid fraction after solid-liquid separation of the pretreated hydrolysate. Inhibitors (phenolics, furans) and oligomers production were also monitored during the pretreatment in the liquid fraction of pretreated PL. Enzymatic hydrolysis (EH) of both pretreated biomass slurry and cellulose-rich solid fraction maintained at a solid loading (dry basis) of 5% wt. was performed at 50 °C and 150 rpm using commercial cellulase at an enzyme dose of 10 FPU/gds. EH resulted in a glucose yield of 13.7 and 18.4 g/L from pretreated slurry and solid fractions, respectively. Fermentation of the sugar syrup obtained by EH of pretreated slurry and the solid fraction was performed at 30 °C for 72 h using Saccharomyces cerevisiae WLP300, resulting in significant ethanol production with more than 91% fermentation efficiency. This study reveals the potential of pineapple leaves waste for biorefinery application, and the role of inhibitors in the overall efficiency of the process when using whole biomass slurry as a substrate.

The municipal authorities in developing nations face serious challenges in marigold flower garbage management. The primary issue is that they never are reused after prayers. Flower waste of Tagetes erecta, T. patula, and Calendula officinalis L. are commonly used for carotenoid and flavonoid extractions and, subsequently, used for incense stick and biogas production. Marigold plants are also used for phytoremediation during their growth stage. The lutein industry is booming due to its increasing market demand, expected to reach ~2121.2 billion tons by 2022, where marigolds are a major contributor globally. The process of isolating lutein from saponified marigold oleoresin yields a product with 70–85% purity. Lutein is a major xanthophyll (70–88%) of marigold petals, and a maximum of 21.23 mg/g of lutein was extracted. This review discusses the properties of selective marigold species, their compositions, and the extraction of different flavonoids and carotenoids, especially lutein. Moreover, different extraction methods of marigold lutein, the collection of marigold waste, and their subsequent utilization to derive several value-added products are discussed. Among physical treatments, ultrasonic-assisted extraction and enzymatic treatment with 5% solids loading were the maximum-yielding methods.

Climate change is causing dramatic changes in global ocean temperature and salinity, threatening coral survival. Coral growth and metabolism are greatly affected by the temperature, salinity and feeding time of the environment. In order to explore the threats to coral survival caused by climate change, this study will investigate the changes in body composition, digestive enzymes and metabolism of G. columna at different temperatures and salinities. A maximum G. columna growth rate was observed at 25 °C and 30–35 psu salinity. The G. columna could survive in a wide salinity range of 25–40 psu. However, the maximum number and weight of G. columna polyps was determined at 30–35 psu. Furthermore, 30–35 psu salinity at 25 °C led to the best G. columna growth and survival, mainly because of their enhanced nutrient absorption rate, polyp expansion rate, metabolic rate and adaptability. Comparing various salinity-temperature treatment groups, all obtained values for growth, behavior and metabolism were significantly higher (p < 0.05) for 30 psu at 25 °C than other treatment groups resulting in maximum G. columna yield. In addition, the optimal timing of G. columna feeding was assessed by studying changes in body composition and digestive enzymes within 24 h of feeding. The results showed that G. columna has higher protein and protease activity between 6:00 a.m. to 12:00 noon. Therefore, at 25 °C, 30–35 psu and feeding will enhance G. columna growth and survival.

In recent years, ciliate infections have caused serious casualties to corals in the ocean. Infected corals die within a short period of time, which not only poses a threat to wild coral reefs, but also has a major impact on large scale aquaculture of coral. Clove is a kind of Chinese medicine with antifungal, antibacterial, antiviral, insecticidal, and other functions. Clove is a natural product. If it can be used in the treatment of coral ciliates, it will reduce this threat to the environment. The clove extract was diluted with sterile seawater to 500 ppm, 1500 ppm, 2500 ppm, 5000 ppm, 7500 ppm, and 10,000 ppm to carry out virulence test on ciliates. The results show that the LC50 value is 1500 ppm, which can cause the death of ciliates in 10 min without causing significant changes in G. columna SOD, CAT, chlorophyll a, and zooxanthellae. In addition, observation of tissue slices revealed that no ciliates and vacuum were found in the G. columna tissue after 10 min of medicated bathing. In summary, 1500 ppm of clove extract can be used for the treatment of coral ciliates.

An investigation of the effect of the molecular weight of polyethylene glycol (PEG) on thin-film composite (TFC) flat sheet polysulfone membrane performance was conducted systematically, for application in forward osmosis (FO) and pressure retarded osmosis (PRO). The TFC flat sheet PSf-modified membranes were prepared via a non-solvent phase-separation technique by introducing PEGs of different molecular weights into the dope solution. The TFC flat sheet PSf-PEG membranes were characterized by SEM, FTIR and AFM. The PSf membrane modified with PEG 600 was found to have the optimum composition. Under FO mode, this modified membrane had a water permeability of 12.30 Lm−2h−1 and a power density of 2.22 Wm−2, under a pressure of 8 bar in PRO mode, using 1 M NaCl and deionized water as the draw and feed solutions, respectively. The high water permeability and good mechanical stability of the modified TFC flat sheet PSF-PEG membrane in this study suggests that this membrane has great potential in future osmotically powered generation systems.

The sediment pollution index acts as a useful indicator for assessing anthropogenic pollution within river drainage basins. An industrialized urban river, Fengshan River in Kaohsiung City, southern Taiwan has been suffering heavy metal pollution from surrounding factories. In this study, spatial and seasonal variations in heavy metals in sediments from seven sampling sites of Fengshan River were determined to assess sediment pollution status and potential ecological risk using multiple sediment pollution indices. Results showed that the heavy metal concentrations displayed large spatial variations. Severe contamination of heavy metals, especially for Cr, Hg, and Zn in the lower reaches of Fengshan River, may attribute to wastewater discharges from leather processing and metal finishing factories along the river drainage basin. An increase in metal concentrations from upstream to downstream indicated that heavy metals tend to accumulate in tidal reaches, probably as a result of the flocculation effect. Frequent heavy rainfall in the wet season can enhance surface runoff to discharge metal pollutants from non-point sources (scattered factories) into the river. Assessment of multiple pollution indices showed moderately polluted (mCd = 3.9, PLI = 2.6) and considerable ecological risk (RI = 540, mERMQ = 0.55), indicating Fengshan River sediments, particularly in the lower reaches, are considered toxic and can cause adverse effects to benthic organisms. Organic matters showed a good correlation with heavy metals, which play an important role in the spatiotemporal variations in heavy metal pollutants in the Fengshan River sediments. This study can provide valuable information for river pollution remediation, and urban planning and management.

Chondroitin sulfate (ChS) is usually used as an oral nutraceutical supplement, and has been popular in Asia, Europe, and United States for many years. In this study, a potential and sustainable source of ChS from jumbo squid (Dosidicus gigas) cartilage was explored; ultrasound-assisted extraction (UAE) was used to extract ChS from jumbo squid cartilage. The result of mass transfer coefficients based on Fick’s law showed that UAE had higher mass transfer efficacy. The response surface methodology (RSM) combined with Box–Behnken design (BBD) was employed to evaluate the effects of the extraction parameters. The optimal conditions were extraction temperature of 52 °C, extraction time of 46 min, and NaOH concentration of 4.15%. The crude extract was precipitated by 50% ethanol, which obtained a purified ChS with 23.7% yield and 82.3% purity. The purified ChS measured by energy-dispersive X-ray spectroscopy (EDX) had a carbon to sulfur molar ratio of approximately 14:1. The FTIR, 1H, and 13C NMR confirmed jumbo squid ChS were present in the form of chondroitin-4-sulfate and chondroitin-6-sulfate, with a 4S/6S ratio of 1.62. The results of this study provide an efficient process for production and purification of ChS, and are significant for the development and utilization of ChS from jumbo squid cartilage in the nutrient food or pharmaceutical industries.

In order to overcome the challenges of low permeate flux (Jp) and the accompanying reverse solute flux (JS) during the forward osmosis (FO) membrane separation process, we synthesized four hybrid materials of polyacid-based organic compounds and incorporated them into the selective polyamide (PA) layer to make novel thin-film nanocomposite (TFN) FO membranes. The Jp and JS of each membrane were evaluated and used along with membrane selectivity (Jp/JS) as indicators of membrane separation performance. The fabricated and modified membranes were also characterized for ridge and valley surface morphologies with increasing hydrophilicity and finger-shaped parallel channels in the PSf substrate. Moreover, two highly hydrophilic nanoparticles of graphene oxide (GO) and titanium oxide (TiO2) were introduced with the hybrid materials for PA modification, which can further enhance the Jp of the TFN membranes. The highest Jp of the TFN membranes achieved 12.1 L/m2-h using 0.1% curcumin-acetoguanamine @ cerium polyacid (CATCP) and 0.0175% GO. The characteristic peaks of the hybrid materials were detected on the membrane surface using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, evidencing successful incorporation of the hybrid materials during membrane modification. Here, we present the novel TFN membranes using hybrid materials for separation applications. The reactions for synthesizing the hybrid materials and for incorporating them with PA layer are proposed.

Fish bones (FBs) are aquatic by-products that are sources of antioxidant-active peptides, calcium dietary supplements, and biomedical materials. Usually, fermentation of these by-products via microorganisms brings desirable changes, enhancing their value. This study investigates the value addition of FB when fermented with Monascus purpureus (MP) for different time intervals, such as 3 days (F3) and 6 days (F6). The results indicate that the soluble protein, peptide, amino acid and total phenol content, as well as the antioxidant capacity (DPPH, ABTS+ radical scavenging activity, and relative reducing power), of F3 and F6 were significantly increased after fermentation. Furthermore, the ROS contents of F3 and F6 were reduced to a greater extent than that of hydrogen peroxide (H2O2) in Clone-9 cells. The MMP integrity, as well as the SOD, CAT, and GPx activity, of F3 and F6 were also increased significantly compared to the H2O2 in Clone-9 cells. Notably, F3 and F6 displayed significant reductions in ROS content, as well as elevate, SOD activity and MMP integrity in Clone-9 cells, when compared with the native FB. These results indicate that the FBs fermented with MP for 3 days (F3), and 6 days (F6) have antioxidant capacity, with possible applications as natural food supplements.

This study focuses on the development of flat sheet thin film nanocomposite (TFN) pressure retarded osmosis (PRO) membranes for the enhancement of osmotic power generation by the incorporation of laboratory-synthesised graphene oxide (GO) into the polysulfone (PSf) polymer matrix. A series of membranes containing different weight percent of GO (0, 0.1, 0.25, 0.5 and 1.0 wt%) were fabricated via a phase inversion method with polyethylene glycol (PEG) as the pore forming agent. The results show that the TFN-0.25GO membrane has excellent water flux, salt reverse flux, high porosity and an enhanced microvoids morphology compared to the control membrane. The highest power density was achieved when TFN-0.25GO was used is 8.36 Wm−2 at pressure >15 bar. It was found that the incorporation of GO into the polymer matrix has significantly improved the intrinsic and mechanical properties of the membrane.

Hierarchical porous birnessite-MnO2-based nanostructure composite materials were prepared on a nickel foam substrate by a successive ionic layer adsorption and reaction method (SILAR). Following composition with reduced graphene oxide (rGO) and multiwall carbon nanotubes (MWCNTs), the as-obtained MnO2, MnO2/rGO and MnO2/rGO-MWCNT materials exhibited pore size distributions of 2–8 nm, 5–15 nm and 2–75 nm, respectively. For the MnO2/rGO-MWCNT material in particular, the addition of MWCNT and rGO enhanced the superb distribution of micropores, mesopores and macropores and greatly improved the electrochemical performance. The as-obtained MnO2/rGO-MWCNT/NF electrode showed a specific capacitance that reached as high as 416 F·g−1 at 1 A·g−1 in 1 M Na2SO4 aqueous electrolyte and also an excellent rate capability and high cycling stability, with a capacitance retention of 85.6% after 10,000 cycles. Electrochemical impedance spectroscopy (EIS) analyses showed a low resistance charge transfer resistance for the as-prepared MnO2/rGO-MWCNT/NF nanostructures. Therefore, MnO2/rGO-MWCNT/NF composites were successfully synthesized and displayed enhanced electrochemical performance as potential electrode materials for supercapacitors.

Marine microorganisms still belong to untapped natural resources and can harness a rich source of lipase enzymes with the potential industrial applications. Thraustochytrids are heterotrophic fungus like protists that can dissolve organic matters via enzymes. It has been less explored so far. Lipase is one of the most widely used enzymes, crucial to many biotechnological and industrial processes, including the food, paper, and oleochemical industries, as well as in applications related to pharmaceuticals. However, its application is relatively expensive and challenging due to its instability and aqueous solubility. Immobilization is a commonly employed strategy to enhance lipase activity, and it has proven to be a successful approach. In comparison to free lipase, immobilized lipase on nanomaterials (NMs) has demonstrated superior properties, including greater pH and temperature stability, a longer stable duration, and the ability to be recycled. However, under specific circumstances, protein loading is comparatively decreased and lipase immobilization on NMs might also occasionally result in activity loss. The overall performance of immobilized lipase is influenced by the NMs types and properties. This review addresses thraustochytrids potential for lipase production, emerging extraction techniques employing nanomaterials, and the significance of various techniques for lipase immobilization. The immobilized lipases' potential for several applications has also been taken into account. [ABSTRACT FROM AUTHOR]

Marine polysaccharide degrading enzymes are pivotal for catalyzing glycosidic linkages' breakdown in polysaccharides, yielding low-degree oligosaccharides and monosaccharides. These enzymes show substantial potential in diverse biotechnological applications. Marine polysaccharides and their derivatives exhibit anti-inflammatory, antiviral, anticoagulant, and anticancer properties, and are used in food additives with potential health benefits such as prebiotic oligosaccharides. Research explores pharmaceutical applications of marine polysaccharide degrading enzymes, including novel drug delivery and therapeutic bioactive oligosaccharide production. These enzymes are crucial for depolymerizing marine polysaccharides, providing energy and nutrients to microorganisms, and contributing to nutrient cycling and ecological balance. The breakdown of marine polysaccharides is vital for the global carbon cycle and helps regulate atmospheric carbon dioxide levels, impacting environmental sustainability. This comprehensive review delves into marine polysaccharide degrading enzymes, emphasizing carrageenase, agarase, chitinase, chitosanase and alginate lyase. Challenges such as low yields, poor stability, and high costs prompt solutions through metabolic engineering, enzyme immobilization, and engineering, enhancing resistance and efficiency. These advancements amplify the value of marine polysaccharidedegrading enzymes in biotechnological and environmental contexts. [ABSTRACT FROM AUTHOR]

Sargassum spp., a predominant seaweed speciesin Taiwan's coastal waters, exhibits a broad spectrum of bioactivities. In the present study, we investigated four Sargassum species viz., S. crassifolium, S. siliquosum, S. hemiphyllum, and S. hemiphyllum var. chinense for various bioactivities. From the four species, we made eight fucoidan extracts, namely SC, SCH, SS, SSH, SH, SHH, SHC, and SHCH with or without a compressional puffing pretreatment. The compressionalpuffing process increased the extraction yield of fucoidan and decreased levels of impurities (proteins and polyphenols). Among the eight fucoidans, SS (IC50 DPPH 0.46±0.01 mg/mL; IC50 ABTS•+ 0.09±0.00 mg/mL; FRAP value 67.4±0.9 μmol/g extract, vitamin C equivalent) and SHC (IC50 DPPH 0.53±0.17 mg/mL; IC50 ABTS•+ 0.11±0.00 mg/mL; FRAP value 55.1±0.6 μmol/g extract, vitamin C equivalent) displayed the highest antioxidant activity; SS (36.4±10.1% at 5 mg/mL for α-amylase; 96.3±0.2% at 1 mg/mL for α-glucosidase) and SHC (35.0±2.2% at 5 mg/mL for α-amylase; 96.5±0.2% at 1 mg/mL for α-glucosidase) showed the strongest α-amylase and α-glucosidase inhibitory activities; SH, SHH and SHC had the most potent anti-inflammatory activity; and SHH had a greatest protective effect against damage to pancreatic cells. Hence, SS, SH, SHH, and SHC may be effective health-promoting agents for nutraceutical products. [ABSTRACT FROM AUTHOR]

The pineapple leaves (PL) left over in the fields after pineapple harvest or burnt out, generate waste which contributes to the release of greenhouse gases. As pineapple is one of the most harvested crops in the world, the quantity of pineapple trash and its disposal methods are challenging. The composition of PL waste makes it unique to encounter the increasing demand for renewable energy and other useful products. This review is focused on the production of different biorefinery products and miscellaneous products from PL waste. The high cellulose content in PL makes it a potential feedstock for the production of different biorefinery products like bioethanol, oligosaccharides, nitrocellulose, and humic acid apart from this, waste is also useful for the production of different products like pineapple leaf fibres, fake eyelashes, organic leather, pulp and paper. Although the opportunities, future perspectives, and challenges concerning PL waste utilization to value-added goods were also addressed. It has been demonstrated that pineapple waste conversions lower waste creation, and the products produced by the conversion would promote the 'waste-to-wealth' notion. [ABSTRACT FROM AUTHOR]