Search

We explore the cutting-edge application of silicon-rich nitride (SRN) in the realm of high numerical aperture (NA) metalens design, focusing on the crucial role of pitch size optimization in amplifying lens efficiency through advanced simulations. Our investigation unveils how the exceptional tunable high refractive index of SRN can be harnessed to achieve significant advancements in metalens performance. By meticulously designing and simulating two innovative SRN-based metalenses - Mk1, with an NA of 0.9, reaching an impressive 75% focusing efficiency with full width at half maximum (FWHM) of 0.53{\lambda}, and Mk2, with an NA of 0.99, achieving a 42% efficiency while maintaining an FWHM of 0.48{\lambda}. We demonstrate the critical influence of reduced pitch size on enhancing efficiency. This study not only highlights the unparalleled potential of SRN in optimizing metalens efficiency but also represents a significant leap forward in the field of nanophotonics, offering new pathways for the development of highly efficient flat photonic devices.

Grating lobes arise from the periodic nature of element spacing in the optical phased array. Essentially, the phased array performs the Spatial Fourier Transform on light; the steering capability of the main lobe is governed by phase shift variations among waveguides, and the Sidelobe Suppression Ratio (SLSR) correlates with the uniformity of emitter positions. Leveraging this understanding, we have optimized a 1x64 channel passive aperiodic OPAs with the uniform random shuffle in the emitter's position. Our conceptual simulations highlight a robust steering capability (18.60{\deg} / 10nm) and SLSR (-13.46 dB @ 0{\deg} / -8.27 dB @ +/-45{\deg}), and initial measurements demonstrate the steering capability (9.8 {\deg} / 10nm, with smaller phase shifts design) and SLSR (-6.1dB @ -33.4{\deg}) from the preliminary fabrication.

With the continuous advancement of nanotechnology, nanodevices have become crucial components in computing, sensing and energy conversion applications. However, the structures of nanodevices typically possess sub-wavelength dimensions and separations, which pose significant challenges for understanding energy transport phenomena in nanodevices. Here, based on a judiciously designed thermal nanodevice, we report the first measurement of near-field energy transport between two coplanar sub-wavelength structures over temperature bias up to ~190 K. Our experimental results demonstrate a remarkable 20-fold enhancement in heat transfer beyond blackbody radiation. In contrast with the well-established near-field interactions between two semi-infinite bodies, the sub-wavelength confinements in nanodevices lead to the increased polariton scattering and the reduction of supporting modes and therefore a lower heat flow at a given separation. Our work unveils exciting opportunities for the rational design of nanodevices, particularly for on-chip near-field energy transport, with important implications for the development of efficient nanodevices for energy harvesting and thermal management., Comment: 35 pages, 19 figures, 2 tables

Accurate direct measurements of far-field thermal infrared emission become increasingly important because conventional methods, relying on indirect assessments, such as reflectance/transmittance, are inaccurate or even unfeasible to characterize state-of-art devices with novel spectra, directionalities, and polarizations. The direct collection of the far-field emission from these tiny devices is also challenging because of their shrinking footprints and uncontrollable radiation noises from their surroundings. Here, we demonstrate a microscopic lock-in FTIR system that realizes significant improvement in signal-to-noise ratio (SNR) by combining a microscope and a lock-in amplifier with an FTIR. The lock-in FTIR is ultrasensitive, with a specific detectivity 10^6 times higher than commercial ones, to overcome the optical loss and background noise during the emission light collection. Based on an analytical model of the signal detection process, we also explore the combination of modulated Joule heating and global heating to fulfill the potential of our system for noise reduction. Our findings show that, compared to previous studies, more than 3 times lower temperatures are sufficient to generate a measurable signal. Under a heating temperature of around 125 {\deg}C, we can achieve an SNR of about 23.7, which is far above the true-signal-threshold (SNR of about 3.0). Furthermore, the system can respond fast enough (up to 175kHz) to record spectral-resolved dynamics of microdevices in the frequency domain. The measurable frequency range can be extended up to MHz or even GHz level by a high-speed circuit model. We believe the system together with the analytical signal processing can be beneficial for next-generation thermal infrared material and device exploration, boosting the applications in lighting, sensing, imaging, and energy harvesting on a small scale., Comment: 19 pages, 4 figures

Metasurfaces consisting of an array of planar sub-wavelength structures have shown great potentials in controlling thermal infrared radiation, including intensity, coherence, and polarization. These capabilities together with the two-dimensional nature make thermal metasurfaces an ultracompact multifunctional platform for infrared light manipulation. Integrating the functionalities, such as amplitude, phase (spectrum and directionality), and polarization, on a single metasurface offers fascinating device responses. However, it remains a significant challenge to concurrently optimize the optical, electrical, and thermal responses of a thermal metasurface in a small footprint. In this work, we develop a center-contacted electrode line design for a thermal infrared metasurface based on a gold nanorod array, which allows local Joule heating to electrically excite the emission without undermining the localized surface plasmonic resonance. The narrowband emission of thermal metasurfaces and their robustness against temperature nonuniformity demonstrated in this work have important implications for the applications in infrared imaging, sensing, and energy harvesting., Comment: 9 pages, 4 figures

Traditional photonic integrated circuit (PIC) inherits the mature CMOS fabrication process from the electronic integrated circuit (IC) industry. However, this process also limits the PIC structure to a single-waveguide-layer configuration. In this work, we explore the possibility of the multi-waveguide-layer PIC by proposing and demonstrating a true 3-D optical phased array (OPA) device, with the light exiting from the edge of the device, based on a multi-layer Si3N4/SiO2 platform. The multi-waveguide-layer configuration offers the possibility of utilizing edge couplers at both the input and the emitting ends to achieve broadband high efficiency. This uniqueness provides the potential for a more extended detection range in the Lidar application. The device has been studied by numerical simulation, and proof-of-concept samples have been fabricated and tested with a CMOS-compatible process. To the best of our knowledge, this is the first experimental proof-of-concept of a true 3-D OPA with a multi-waveguide-layer configuration all over the device.