Search

Sulfated biomolecules are known to influence numerous biological processes in all living organisms. Particularly, they contribute to prevent and inhibit the hypercoagulation condition. The failure of polymeric implants and blood contacting devices is often related to hypercoagulation and microbial contamination. Here, bioactive sulfated biomacromolecules are mimicked by sulfation of poly(glycerol glycidyl ether) (polyGGE) films. Autoclaving, gamma-ray irradiation and ethylene oxide (EtO) gas sterilization techniques were applied to functionalized materials. The sulfate group density and hydrophilicity of sulfated polymers were decreased while chain mobility and thermal degradation were enhanced post autoclaving when compared to those after EtO sterilization. These results suggest that a quality control after sterilization is mandatory to ensure the amount and functionality of functionalized groups are retained.

Glycerol-based epoxy networks have great potential for surface functionalization, providing anti-microbial and protein repellant function. However, the synthesis of glycerol glycidyl ether (GGE) monomer often requires excessive epichlorohydrin (ECH). ECH derived organochloride containing byproducts from monomer production maybe present in the eluent of the polymer networks prepared by cationic ring-opening polymerization. Here, the cytotoxicity analysis revealed cell damages in contact with the polyGGE eluent. The occurrence of organochlorides, which was predicted based on the data from high-performance liquid chromatography/electrospray ionization mass spectrometry, as confirmed by a constant chloride level in GGE and polyGGE, and by a specific peak of C–Cl in infrared spectra of GGE. The resulting polyGGE was densely crosslinked, which possibly contribute to the trapping of organochlorides. These results provide a valuable information for exploring the toxins leaching from polyGGE and propose a feasible strategy for minimizing the cytotoxicity via reducing their crosslink density. Graphic abstract The eluent of poly(glycerol glycidyl ether) (polyGGE) films impaired the viability and metabolic activity of L-929 cells due to the organochloride byproducts or epichlorohydrin precursors originating from the GGE monomer, which was predicted based on the data from high-performance liquid chromatography/electrospray ionization mass spectrometry (HPLC–ESI–MS) and confirmed by chloride content analysis and attenuated total reflection fourier transform infrared (ATR-FT-IR) spectroscopy.

The establishment of confluent endothelial cell (EC) monolayers on implanted materials has been identified as a concept to avoid thrombus formation but is a continuous challenge in cardiovascular device engineering. Here, material properties of gelatin-based hydrogels obtained by reacting gelatin with varying amounts of lysine diisocyanate ethyl ester were correlated with the functional state of hydrogel contacting venous EC (HUVEC) and HUVEC's ability to form a monolayer on these hydrogels. The density of adherent HUVEC on the softest hydrogel at 37 °C (G' = 1.02 kPa, E = 1.1 ± 0.3 kPa) was significantly lower (125 mm-1) than on the stiffer hydrogels (920 mm-1; G' = 2.515 and 5.02 kPa, E = 4.8 ± 0.8 and 10.3 ± 1.2 kPa). This was accompanied by increased matrix metalloprotease activity (9 pmol·min-2 compared to 0.6 pmol·min-2) and stress fiber formation, while cell-to-cell contacts were comparable. Likewise, release of eicosanoids (e.g., prostacyclin release of 1.7 vs 0.2 pg·mL-1·cell-1) and the pro-inflammatory cytokine MCP-1 (8 vs

Establishing an endothelial cell (EC) monolayer on top of the blood contacting surface of grafts is considered to be a promising approach for creating a hemocompatible surface. Here we utilized the high affinity interactions between the EC plasma membrane expressed enzyme called endothelin converting enzyme-1 (ECE-1) and its corresponding substrate big Endothelin-1 (bigET-1) to engineer an EC-specific binding surface. Since enzymatic cleavage of substrates require physical interaction between the enzyme and its corresponding substrate, it was hypothesized that a surface with chemically immobilized synthetic bigET-1 will preferentially attract ECs over other types of cells found in vascular system such as vascular smooth muscle cells (VSMCs). First, the expression of ECE-1 was significantly higher in ECs, and ECs processed synthetic bigET-1 to produce ET-1 in a cell number-dependent manner. Such interaction between ECs and synthetic bigET-1 was also detectible in blood. Next, vinyl-terminated self-assembled monolayers (SAMs) were established, oxidized and activated on a glass substrate as a model to immobilize synthetic bigET-1 via amide bonds. The ECs cultured on the synthetic bigET-1-immobilized surface processed larger amount of synthetic bigET-1 to produce ET-1 compared to VSMCs (102.9±5.13 vs. 9.75±0.74 pg/ml). The number of ECs bound to the synthetic bigET-1-immobilized surface during 1 h of shearing (5dyne/cm2) was approximately 3-fold higher than that of VSMCs (46.25±12.61 vs. 15.25±3.69 cells/100×HPF). EC-specific binding of synthetic bigET-1-immobilized surface over a surface modified with collagen, a common substance for cell adhesion, was also observed. The present study demonstrated that using the substrate-enzyme affinity (SEA) of cell type-specific enzyme and its corresponding substrate can be an effective method to engineer a surface preferentially binds specific type of cells. This novel strategy might open a new route toward rapid endothelialization under dynamic conditions supporting the long-term patency of cardiovascular implants.

Enzymes can be a renewable source of catalytic agents and thus be interesting for sustainable approaches to create and modify functional materials. Here, thin hydrogel layers were prepared as thin coatings on hard substrates by immobilized horseradish peroxidase. Hydrophilic 4-arm star shaped telechelics from oligo(ethylene glycol) bearing on average 55% end groups derived from aromatic amino acids served as monomers and enzymatic substrates. Shifts of the contact angle from 84° to 62° for the wetting process and of zeta potential towards the neutral range illustrated an alteration of physicochemical properties of the model surfaces by a hydrophilic shielding. Time-of-flight secondary ion mass spectrometry (ToF-SIMS), quartz crystal microbalance and atomic force microscopy (AFM) experiments enabled the qualitative and quantitative proof of hydrogel deposition at the interface with thicknesses in the medium nanometer size range. Conceptually, as the immobilized enzyme becomes entrapped in the hydrogel and the crosslinking mechanism bases on a radical reaction after enzymatic activation of the monomers with a limited diffusivity and lifetime, the formed network material can be assumed to be inhomogeneous on the molecular level. On the macroscale, however, relative homogeneity of the coating was observed via ToF-SIMS and AFM mapping. As an exemplary functional evaluation in view of bioanalytical applications, the thrombogenicity of the coating was studied in static tests with human blood from several donors. In the future, this “coating-from” approach may be explored for cell culture substrate coatings, for protein/biofilm repellence in technical applications, or in bioanalytical devices.

Biofouling on medical device surfaces, which is initiated by protein adsorption and adhesion of microbes especially the antibiotic-resistant bacteria, attracts global attention for centuries due to its enduring challenges in healthcare. Here, the antifouling effect of hydrophilic poly(glycerol glycidyl ether) (polyGGE) film is explored in comparison to hemocompatible and protein-resistant control polymers. The chemical and thermomechanical stability of polyGGE in hydrated conditions at body temperature was achieved via adjusting UV curing and KOH quenching time. The polyGGE surface is inert to the plasma protein adsorption and interfered the metabolism conditions, biofilm formation and growth of both Gram negative (Gram–) and antibiotic-resistant Gram positive (Gram+) bacteria. These results indicate the potential application of polyGGE for combating the risk of hospital-acquired infections and preventing drug-resistant superbug spreading.

Implantation of synthetic small-diameter vascular bypass grafts is often associated with an increased risk of failure, due to thrombotic events or late intimal hyperplasia. As one of the causes an insufficient hemocompatibility of the artificial surface is discussed. Endothelialization of synthetic grafts is reported to be a promising strategy for creating a self-renewing and regulative anti-thrombotic graft surface. However, the establishment of a shear resistant cell monolayer is still challenging. In our study, cyto- and immuno-compatible poly(ether imide) (PEI) films were explored as potential biomaterial for cardiovascular applications. Recently, we reported that the initial adherence of primary human umbilical vein endothelial cells (HUVEC) was delayed on PEI-films and about 9 days were needed to establish a confluent and almost shear resistant HUVEC monolayer. To accelerate the initial adherence of HUVEC, the PEI-film surface was functionalized with an aptamer-cRGD peptide based endothelialization supporting system. With this functionalization the initial adherence as well as the shear resistance of HUVEC on PEI-films was considerable improved compared to the unmodified polymer surface. The in vitro results confirm the general applicability of aptamers for an efficient functionalization of substrate surfaces.

The endothelialization of synthetic surfaces applied as cardiovascular implant materials is an important issue to ensure the anti-thrombotic quality of a biomaterial. However, the rapid and constant development of a functionally-confluent endothelial cell monolayer is challenging. In order to investigate the compatibility of potential implant materials with endothelial cells several in vitro studies are performed. Here, glass and tissue culture plates (TCP) are often used as reference materials for in vitro pre-testing. However, a direct comparison of both substrates is lacking. Therefore, a comparison of study results is difficult, since results are often related to various reference materials. In this study, the endothelialization of glass and TCP was investigated in terms of adherence, morphology, integrity, viability and function using human umbilical vein endothelial cells (HUVEC). On both substrates an almost functionally confluent HUVEC monolayer was developed after nine days of cell seeding with clearly visible cell rims, decreased stress fiber formation and a pronounced marginal filament band. The viability of HUVEC was comparable for both substrates nine days after cell seeding with only a few dead cells. According to that, the cell membrane integrity as well as the metabolic activity showed no differences between TCP and glass. However, a significant difference was observed for the secretion of IL-6 and IL-8. The concentration of both cytokines, which are associated with migratory activity, was increased in the supernatant of HUVEC seeded on TCP. This result matches well with the slightly increased number of adherent HUVEC on TCP. In conclusion, these findings indicate that both reference materials are almost comparable and can be used equivalently as control materials in in vitro endothelialization studies.

BACKGROUND Physical and chemical characteristics of implant materials determine the fate of long-term cardiovascular devices. However, there is still a lack of fundamental understanding of the molecular mechanisms occurring in the material-tissue interphase. In a previous study, soft covalently crosslinked poly(n-butyl acrylate) networks (cPnBA) were introduced as sterilizable, non-toxic and immuno-compatible biomaterials with mechanical properties adjustable to blood vessels. Here we study the influence of different surface treatments in particular oxygen plasma modification and fibrinogen deposition as well as a combinatorial approach on the adhesion and viability of fibroblasts. MATERIAL AND METHODS Two types of cPnBA networks with Young's moduli of 0.19±0.01 MPa (cPnBA04) and 1.02±0.01 MPa (cPnBA73) were synthesized and post-modified using oxygen plasma treatment (OPT) or fibrinogen coating (FIB) or a combination of both (OPT+FIB). The water contact angles of the differently post-treated cPnBAs were studied to monitor changes in the wettability of the polymer surfaces. Because of the key role of vascular fibroblasts in regeneration processes around implant materials, here we selected L929 fibroblasts as model cell type to explore morphology, viability, metabolic activity, cell membrane integrity as well as characteristics of the focal adhesions and cell cytoskeleton on the cPnBA surfaces. RESULTS Compared to non-treated cPnBAs the advancing water-contact angles were found to be reduced after all surface modifications (p

Ultrasound contrast agents (USCA) allows the dynamic detection of blood flow of both the macro and microvasculature. An obvious prerequisite for USCAs is the unhindered passage of clinically relevant dose levels through the microcirculation especially of the lungue, where they have to pass capillaries with diameters of around 4 μm. While smaller microbubbles rapidly passed through the microcirculation along with the red blood cells, larger microbubbles, however, were observed to coalesce and interrupt the blood flow. Whether this might influence the tissue oxygen tension is unclear up to now.To examine this question a bolus of 2.4 ml SonoVue™ was injected into the suprarenal aorta at a flow rate of 10 ml/s (a dosage usually applied in the clinic). The pO2 in the outer medulla of the kidney was continuously measured using a flexible pO2 microcatheter. In addition, the SonoVue™ injection and its passage through the renal vasculature were documented by the CEUS technology to assess whether the microbubbles passed the kidney.The study revealed that SonoVue™ induced no changes of the mean oxygen partial pressure in the outer medulla which confirms that these microbubbles on their way through the medullar capillaries did not hinder the co-flow of blood through the renal microvessels in a big animal model with a renal morphology and function comparable to human kidneys. These results demonstrate that the CEUS diagnostic itself did not influence the system to be examined which is a most important prerequisite for any diagnostic method.

In drug eluting stents the cytostatic drugs Sirolimus or Tacrolimus are used to inhibit blood vessel restenosis by limiting the proliferation of smooth muscle cells. However, the cytostatic activity of both drugs was shown to be not cell specific and could also affect the stent endothelialisation, respectively. Currently, only limited in vitro data are available about the impact of Sirolimus and Tacrolimus on endothelial cell proliferation over a broad concentration range. To answer this question the following study was performed.Commercially obtained HUVEC were expanded with DMEM cell culture medium (GIBCO, Germany) supplemented with 5 vol% fetal calf serum on non-coated regular polystyrene-based 24-multiwell plates. For drug testings 2×104 cells/cm2 were seeded and grown for 24 h until 30-40% of the multiwell surfaces were covered and then exposed to Sirolimus (1.0×10-11 - 1.0×10-5 mol/l) or Tacrolimus (2.0×10-8 - 6.2×10-5 mol/l), both dissolved in DMSO. 12, 24 and 48 h after adding the drugs cell numbers per area were quantified by counting the cells in six wells with four fields of view per well, representing 0.6 mm2, using a confocal laser microscope.After 48 h of cell growth in the drug-free cell culture medium, the HUVEC number increased from 2.0×104 to 3.55×104 cells/cm2 (mean cell doubling time: 53.6 h, n = 6). At lower concentrations (≤2.0×10-6 mol/l) Tacrolimus reduced the number of adherent HUVEC significantly less than Sirolimus (p < 0.05). However, at higher concentrations (≥2.07×10-5 mol/l) the effect of Tacrolimus on the number of adherent endothelial cells was significantly greater than that of Sirolimus (p < 0.05). At the highest concentration applied (6.22×10-5 mol/l), Tacrolimus induced detachment of all HUVECs within 12 h after drug application. The number of adherent HUVEC decreased only slightly (about 9%) after Sirolimus application at the highest concentration (1.09×10-5 mol/l).These data show that in a non-flow model the cytostatic drug Tacrolimus reduced the number of adherent endothelial cells less than Sirolimus, as long as the drug concentration did not surpass 10-6 mol/l. At the limits of solubility, Sirolimus (1×10-5 mol/l) reduced the number of adherent endothelial cells less than Tacrolimus (6×10-5 mol/l), which induced detachment of endothelial cells.

Cell-based therapies often face the challenge of low cell retention and viability upon transplantation. Hence, biomaterials, which can immobilize transplanted cells, while at the same time support cell viability, are essential for successful clinical application. Noteworthy, biomaterials in the micrometer range such as microcapsules or microspheres have the advantage of a minimally invasive introduction into tissue.Hence, we established an approach to generate gelatin-based cell carriers in the form of microspherical hydrogels. Fibroblasts were microencapsulated in glycidylmethacrylate (GMA)-functionalized gelatin by photopolymerization. While the degree of GMA-functionalization was kept constant, the hydrogel cross-linking density was adjusted by varying the time of irradiation or the average gelatin-chain length.Stable microspheres were synthesized from 10 wt% GMA-gelatin solutions for all irradiation periods tested (0.5 -2 min). Evaluation of cell viability revealed that microgels with the same weight content of biopolymer but with decreased cross-linking densities and thus decreased storage and E modulus, resulted in best cell support. Noteworthy, encapsulated cells partially migrated out of the microspheres and attached to the spherical surface.10 wt% GMA-gelatin-based hydrogels with E moduli comparable to the native cellular niche proved to be a promising biomaterial suitable for the production of cell-laden microspheres and shall be evaluated further for biomedical application.

Angiogenesis is one of the key processes during development, wound healing and tumor formation. Prerequisite for its existence is the presence of endogenous electrical fields (EFs) generated by active ion transport across polarized epithelia and endothelia, and appearance of the transcellular potentials. During angiogenesis cellular factor as endothelial growth factor (VEGF), synthesis of adhesive proteins and membrane metalloproteinases (MMPs) govern the angiogenic response to different external stimuli as biomaterials interactions and/or exogenous EF. Gelatin-based hydrogels with elasticities comparable to human tissues have shown to influence cell behavior as well as cell attachment, protein synthesis, VEGF and MMP's production after the application of EF. Gelatin-based matrices with 3 (G10_LNCO3), 5 (G10_LNCO5), and 8 (G10_LNCO8) fold excess of isocyanate groups per mol of amine groups present in gelatin were used. Human umbilical endothelial cells (HUVEC) (Lonza Basel, Switzerland) and highly invasive breast cancer MDA-MB-231 cells (ATCC®HTB-26TM) were used. For an estimation of the amount of VEGF released from cells a commercially available VEGF ELISA (Thermo Fisher Scientific, Germany) kit was used. Fibronectin (FN) enzyme immunoassay (EIA) was used to analyze the secreted amount of FN by cells seeded on the materials. Secreted MMPs were analyzed by zymography. Gelatin-based hydrogels attracted HUVEC adhesion and diminished the adhesion of MDA-MB-231 cells. The applied direct current (DC) EF induced an almost 5-fold increase in VEGF production by HUVEC seeded on gelatin-based hydrogels, while in contrast, the applied EF decreased the production of VEGF by cancer cells. FN synthesis was elevated in HUVEC cells seeded on gelatin-based materials in comparison to FN synthesis by cancer cells. HUVEC seeded on gelatin hydrogels showed an expression mainly of MMP-2. The application of EF increased the production of MMP-2 in HUVEC seeded on gelatin materials. In contrast, for MDA-MB-231 the production of MMPs on gelatin materials was lower compared to control materials. With the application of EF the levels of MMP-9 decreased but MMP-2 expression raised significantly for gelatin materials. Overall, the results showed that studied gelatin materials suppressed attachment of cancerous cells, as well as suppressed their angiogenic potential revealed by decreased VEGF and MMP production. Thus, this study approved gelatin-based hydrogels with proper elasticity characteristics and different degradation behavior as useful matrices for use in vascular tissue regeneration or in restriction of tumor growth after tumor resection.

Background Endothelial cells (EC) in vivo are strongly influenced by changes of the milieu exterieur. Under pathological conditions EC can become activated e.g. in hypoxic areas or during sepsis. In general, the endothelialization of implant materials is evaluated in vitro under physiological conditions. Though, in patients who receive implant materials pathological conditions are often present. An open question is therefore, how ECs seeded on a body foreign substrate behave in a pathologic microenvironment. In this in vitro study a microenvironment was created mimicking the conditions present in septic patients. To simulate this situation in vitro, serum of patients with septic shock was added to the culture medium of EC cultured on glass. The samples were sheared in a cone-plate rheometer (shear rate of 6 dyn/cm2) with subsequent analysis of the morphology, the microfilament organization and the shear resistance and compared to control cultures of EC without shock serum supplementation. Aim of the study was to investigate whether this in vitro model provides information about the functionality of an EC monolayer on a body foreign surface under pathological conditions. Results Septic conditions induced severe changes of the morphology of the adherent cells: there was a strong induction of stress fibers. In addition, lots of cells or cell groups were detached visible as denuded areas in the EC monolayer. After shear stress exposure only 28.7% of EC seeded in cell medium supplemented with serum of septic patients remained adherent (control cells: 96.8%). Conclusion The study demonstrates that the microenvironment is of extreme importance for the behavior of EC and that in vivo pathologies can be simulated in vitro. This opens the possibility to evaluate new implant materials under physiological but more important also under certain pathological conditions - simulating the implant size and the disease of the host.

Polymers are often contaminated with lipopolysaccharides also known as endotoxins. Even small amounts of endotoxins can have strong effects on endothelial cell function so that the endothelialisation of cardiovascular implants might be hampered. An open question is how endothelial cells seeded on a body foreign substrate respond to shear load after adding Lipid A (LPA), the domain, which is responsible for much of the toxicity of gram-negative bacteria, and whether morphological changes of endothelial cells occur. LPA supplementation to the culture medium in increasing concentrations (5, 25 and 50μg/ml) resulted in progressive reductions of the density of adherent HUVEC after shear load (p

Circulating blood cells are prone to varying flow conditions when contacting cardiovascular devices. For a profound understanding of the complex interplay between the blood components/cells and cardiovascular implant surfaces, testing under varying shear conditions is required. Here, we study the influence of arterial and venous shear conditions on the in vitro evaluation of the thrombogenicity of polymer-based implant materials. Medical grade poly(dimethyl siloxane) (PDMS), polyethylene terephthalate (PET) and polytetrafluoroethylene (PTFE) films were included as reference materials. The polymers were exposed to whole blood from healthy humans. Blood was agitated orbitally at low (venous shear stress: 2.8 dyne. cm(-2)) and high (arterial shear stress: 22.2 dyne .cm(-2)) agitation speeds in a well-plate based test system. Numbers of non-adherent platelets, platelet activation (P-Selectin positive platelets), platelet function (PFA100 closure times) and platelet adhesion (laser scanning microscopy (LSM)) were determined. Microscopic data and counting of the circulating cells revealed increasing numbers of material-surface adherent platelets with increasing agitation speed. Also, activation of the platelets was substantially increased when tested under the high shear conditions (P-Selectin levels, PFA-100 closure times). At low agitation speed, the platelet densities did not differ between the three materials. Tested at the high agitation speed, lowest platelet densities were observed on PDMS, intermediate levels on PET and highest on PTFE. While activation of the circulating platelets was affected by the implant surfaces in a similar manner, PFA closure times did not reflect this trend. Differences in the thrombogenicity of the studied polymers were more pronounced when tested at high agitation speed due to the induced shear stresses. Testing under varying shear stresses, thus, led to a different evaluation of the implant thrombogenicity, which emphasizes the need for testing under various flow conditions. Our data further confirmed earlier findings where the same reference implants were tested under static (and not dynamic) conditions and with fresh human platelet rich plasma instead of whole blood. This supports that the application of common reference materials may improve inter-study comparisons, even under varying test conditions.

BACKGROUND: The formation of a functionally-confluent endothelial cell (EC) monolayer affords proliferation of EC, which only happens in case of appropriate migratory activity. AIM OF THE STUDY: The migratory pathway of human umbilical endothelial cells (HUVEC) was investigated on different polymeric substrates. MATERIAL AND METHODS: Surface characterization of the polymers was performed by contact angle measurements and atomic force microscopy under wet conditions. 30,000 HUVEC per well were seeded on polytetrafluoroethylene (PTFE) (theta(adv) = 119 degrees +/- 2 degrees), on low-attachment plate LAP (theta(adv) = 28 degrees +/- 2 degrees) and on polystyrene based tissue culture plates (TCP, theta(adv) = 22 degrees +/- 1 degrees). HUVEC tracks (trajectories) were recorded by time lapse microscopy and the euclidean distance (straight line between starting and end point), the total distance and the velocities of HUVEC not leaving the vision field were determined. RESULTS: On PTFE, 42 HUVEC were in the vision field directly after seeding. The mean length of single migration steps (SML) was 6.1 +/- 5.2 mu m, the mean velocity (MV) 0.40 +/- 0.3 mu m.min(-1) and the complete length of the trajectory (LT) was 710 +/- 440 mu m. On TCP 82 HUVEC were in the vision field subsequent to seeding. The LT was 840 +/- 550 mu m, the SML 6.1 +/- 5.2 mu m and the MV 0.44 +/- 0.3 mu m.min(-1). The trajectories on LAP differed significantly in respect to SML (2.4 +/- 3.9 mu m, p

Background Contrast-induced acute kidney injury (CI-AKI), a potentially life-threatening complication of iodinated contrast media in patients with impaired renal function, has attracted increasing attention in recent years. There is overwhelming evidence that the most important pre-disposing factor for a contrast-medium induced nephropathy is the pre-existence of a renal impairment. Methods The registry was performed as a part of a quality management project in the Dresden-Friedrichstadt heart catheter laboratory. In compliance with the Declaration of Helsinki/Somerset West, 9,026 patients were included between 2010 and 2015. 100 patients of these were participants in a chronic dialysis program. All patients were dialyzed on the day before angiography. In all patients a coronary angiography, in 28 patients a stent implantation and in 12 patients a surgical reconstruction had to be performed. Prior to the intervention and one, two and three days thereafter the serum creatinine was measured. Results Up to the third day after application of the iodinated contrast medium no significant changes of the serum creatinine (baseline value: 423.3±42.6μmol/l) occurred (ANOVA for repeated measures: p = 0.507). On average, a slight decrease of the serum creatinine was found.All patients remained in their routine dialysis-program. 18 out of 100 died during the next three months after the procedure. Conclusion The study revealed that the coronary angiography using Iodixanol as iodinated contrast medium did not result in an increase of serum creatinine, which was drastically elevated in these patients before application of the iodinated contrast medium.

Successful vascularization is essential in wound healing, the histo-integration of biomaterials, and other aspects of regenerative medicine. We developed a functional in vitro assay to dissect the complex processes directing angiogenesis during wound healing, whereby vascular cell spheroids were induced to sprout in the presence of classically (M1) or alternatively (M2) activated macrophages. This simulated a microenvironment, in which sprouting cells were exposed to the inflammatory or proliferation phases of wound healing, respectively. We showed that M1 macrophages induced single-cell migration of endothelial cells and pericytes. In contrast, M2 macrophages augmented endothelial sprouting, suggesting that vascular cells infiltrate the wound bed during the inflammatory phase and extensive angiogenesis is initiated upon a switch to a predominance of M2. Interestingly, M1 and M2 shared a pro-angiogenic secretome, whereas pro-inflammatory cytokines were solely secreted by M1. These results suggested that acute inflammatory factors act as key inducers of vascular cell infiltration and as key negative regulators of angiogenesis, whereas pro-angiogenic factors are present throughout early wound healing. This points to inflammatory factors as key targets to modulate angiogenesis. The here-established wound healing assay represents a useful tool to investigate the effect of biomaterials and factors on angiogenesis during wound healing.

Preclinical drug safety assessment includes in vitro studies with physiologically relevant cell cultures. As an in vitro system for hepatic toxicology testing, we have been generating cell clones of human hepatoblastoma cell line HepG2 by lentiviral transduction of phase I cytochrome P450 (CYP) enzymes. Here, we present a stable CYP2C19-overexpressing HepG2 cell clone (HepG2-2C19 C1) showing an enzyme activity of approximately 82 pmol x min−1 x mg−1 total cellular protein. The phenotypic stability over several passages of HepG2-2C19 C1 renders them to be a suitable reference cell clone for benchmarking CYP2C19 enzyme activity. In addition, we were interested to analyze acute cytotoxicity of the model drug cyclophosphamide (CPA) metabolized by HepG2-2C19 C1 and by a previously generated CYP3A4-overexpressing HepG2 cell clone. Upon 10 mM CPA exposure, we were able to detect its metabolites 4-hydroxy-cyclophosphamide and acrolein in CYP3A4- and CYP2C19-expressing cell clones, but not in parental HepG2 cell line. XTT and ATP assays showed a modest reduction of cell viability of not more than 50% with high dose (10 mM) CPA treatment. By contrast, dramatic acute cytotoxic effects of CPA were evident by the formation of nuclear γH2AX foci and by increased cell death events. These effects were paralleled by substantial decreases of cell membrane integrity as measured by the trypan blue exclusion test. Our data on CYP enzyme overexpressing HepG2 cell clones clearly show that cytotoxicity of CPA is dramatically underestimated by standard metabolic activity tests. Thus, additional tests to quantitate DNA damage formation and cell death induction might be required to realistically assess cytotoxicity of such compounds.

Laser tissue soldering (LTS) based on indocyanine green (ICG)-mediated heat-denaturation of proteins might be a promising alternative technique for micro-suturing, but up to now the problem of too weak shear strength of the solder welds in comparison to sutures is not solved. Earlier reports gave promising results showing that solder supported by carrier materials can enhance the cohesive strength of the liquid solder. In these studies, the solder was applied to the carriers by dip coating. Higher reliability of the connection between the solder and the carrier material is expected when the solder is bound covalently to the carrier material. In the present study a poly(ether imide) (PEI) membrane served as carrier material and ICG-supplemented albumin as solder substrate. The latter was covalently coupled to the carrier membrane under physiological conditions to prevent structural protein changes. As laser source a diode continuous-wave laser emitting at 808 nm with intensities between 250 mW and 1500 mW was utilized. The albumin functionalized carrier membrane was placed onto the tunica media of explanted pig thoracic aortae forming an overlapping area of approximately 0.5×0.5 cm2. All tests were performed in a dry state to prevent laser light absorption by water. Infrared spectroscopy, spectro-photometrical determination of the secondary and primary amine groups after acid orange II staining, contact angle measurements, and atomic force microscopy proved the successful functionalization of the PEI membrane with albumin. A laser power of 450 mW LTS could generate a membrane-blood vessel connection which was characterized by a shear strength of 0.08±0.002 MPa, corresponding to 15% of the tensile strength of the native blood vessel. Theoretically, an overlapping zone of 4.1 mm around the entire circumference of the blood vessel could have provided shear strength of the PEI membrane-blood vessel compound identical to the tensile strength of the native blood vessel. These in-vitro results confirmed the beneficial effects of solder reinforcement by carrier membranes, and suggest LTS with covalently bound solders on PEI substrates for further studies in animal models.

Erythrocytes transport oxygen from the lungs to the tissues. The excess surface area together with the elasticity of the erythrocyte cell membrane provides the flexibility needed to pass through the microvasculature where the oxygen exchange occurs. Although the architecture of the red cell and its membrane-associated cytoskeletal network is known in general, the factors that control the characteristic shape change during echinocyte formation are poorly understood. In this short report we show that in echinocytes a completely reorganized membrane cytoskeleton with a box-like structure of actin filaments prevailed indicating the importance of the actin cytoskeleton during echinocyte formation. The red blood cell membrane is an elastic shell with remarkable properties. Peripheral erythrocytes are cell remnants, since they have lost their nuclei, cytoplasmic organelles and are no longer able to synthesize proteins and to proliferate. However, they are absolutely essential for the survival of any macro organism with a blood circulation, because they transport the majority of the necessary oxygen to the cells of the body. Human erythrocytes circulate in the body for about 120 days and are normally discocytes with a biconcave shape and a diameter of ∼7.5 mm, a surface area of ∼140 mm2 and a volume of ∼100 mm3 [1]. The excess surface area of erythrocytes (allowing the flattened shape under resting conditions), together with the elasticity of their membranes, provides them with the flexibility needed to pass through very small capillaries with diameters as small as 2-3 mm [2, 3]). The erythrocyte membrane consists of a phospholipid bilayer with embedded membrane proteins and an underlying membrane cytoskeleton.

Biomaterials made of zinc have been widely described to be antioxidative, hypothrombogenic, antiinflammatory and antiproliferative. Additionally in vivo zinc is toxic only in high concentrations and can completely be metabolized in vivo. Due to these properties zinc based vascular stents might be able to reduce the rate of restenosis in comparison to bare metal stents and zinc stents might be also able to limit the foreign body reaction. In the presented study we tested the biocompatibility and degradability of a stent made of zinc and characterized by a closed-cell-design to achieve high opening force and to increase stent stiffness. After 100 days of enzymatic and hydrolytic degradation in 15 ml blood serum (fetal calf serum) a significant loss of weight (1.72 wt% ) was measured. Zinc was compared to other metals in terms of degradation rates. After six weeks of incubation in physiologic sodium chloride solution zinc showed the slowest degradation time, 6 times less than stainless steel and 4 times less than magnesium. In the tests for cytotoxic effects the degraded zinc stent caused no changes in the LDH-release and cell membrane integrity (3T3 cells, mouse fibroblasts) respectively, in the cell activity/proliferation (MTS assay) and in the morphological characteristics of the cells and cell layers in comparison to the control material (polystyrene). Based on these results the tested zinc stent proved to be non-cytotoxic and to be characterized by degradation characteristics which might be advantageous in comparison to magnesium and stainless steel.

Poly(ether imide) (PEI), which can be chemically functionalized with biologically active ligands, has emerged as a potential biomaterial for medical implants. Electrospun PEI scaffolds have shown advantageous properties, such as enhanced endothelial cell adherence, proliferation and low platelet adhesion in in vitro experiments. In this study, the in vivo behaviour of electrospun PEI scaffolds and PEI films was examined in a murine subcutaneous implantation model. Electrospun PEI scaffolds and films were surgically implanted subcutaneously in the dorsae of mice. The surrounding subcutaneous tissue response was examined via histopathological examination at 7 and 28 days after implantation. No serious adverse events were observed for both types of PEI implants. The presence of macrophages or foreign body giant cells in the vicinity of the implants and the formation of a fibrous capsule indicated a normal foreign body reaction towards PEI films and scaffolds. Capsule thickness and inflammatory infiltration cells significantly decreased for PEI scaffolds during days 7-28 while remaining unchanged for PEI films. The infiltration of cells into the implant was observed for PEI scaffolds 7 days after implantation and remained stable until 28 days of implantation. Additionally some, but not all, PEI scaffold implants induced the formation of functional blood vessels in the vicinity of the implants. Conclusively, this study demonstrates the in vivo biocompatibility of PEI implants, with favourable properties of electrospun PEI scaffolds regarding tissue integration and wound healing. Copyright © 2015 John Wiley & Sons, Ltd.

Mesenchymal stem cells (MSCs) are targeted as vehicles for cell mediated gene therapy. Here we report on a macromolecular carrier, which was designed aiming at successful targeted gene delivery into MSCs through the mediation of folate receptor and reduced cytotoxicity compared to established cationic polymer vector – polyethylenimine with a weight average molecular weight (Mw) of 25,000 Dalton (PEI25K). The carrier PHPA-PEI1800-FA was synthesized in a two-step procedure. PHPA-PEI1800 was prepared by grafting polyethylenimine with a Mw of 1800 Dalton (PEI1800) onto the α,β-poly(N-3-hydroxypropyl)-D,L-aspartamide (PHPA) backbone. PHPA-PEI1800-FA was obtained by chemically conjugating folic acid onto PHPA-PEI1800. The grafting degree of PEI1800 was 3.9±0.2% in relation to the CH groups of PHPA and the molar ratio of folic acid conjugated to PEI1800 (χFA) was 1.8±0.1 as calculated by NMR spectroscopy. The copolymers were biodegradable and exhibited lower cytotoxicity than PEI25K. Compared to PHPA-PEI1800, PHPA-PEI1800-FA led to a significantly higher transfection efficiency in human MSCs, which could be attributed to the mediation of folate receptor during the transfection process as confirmed by folic acid competition assay. Both marker gene (GFP) and therapeutic gene (VEGF) were delivered into human MSCs from multi-donors using PHPA-PEI1800-FA. The percentage of GFP+ MSCs showed an average value of 2.85±1.60% but a large variation for different samples. The VEGF expression level of the PHPA-PEI1800-FA transfected cells was significantly higher than that of either untransfected or naked DNA transfected cells. Conclusively, PHPA-PEI1800-FA is a suitable vector to deliver genes into human MSCs through the interaction with folate receptor.

Mesenchymal stem cells (MSCs) have become one of the most important cell sources for regenerative medicine. However, some mechanisms of MSC-based therapy are still not fully understood. The clinical outcome may be restricted by some MSC-related obstacles such as the low survival rate, differentiation into undesired lineages and malignant transformation. In recent years, with the emergence of nanotechnology, various types of multifunctional nanoparticles (NPs) have been designed, prepared and explored for bio-related applications. There is high potential of NPs in biomedical applications, attributed to the high capacity of cellular internalization in MSCs and their multiple functionalities. They can be used either as labeling agent to track MSCs for mechanism study or as gene/drug delivery carriers to regulate the cellular behavior and functions of MSCs. However, the application of NPs may be accompanied by some undesirable effects, as some NPs can induce cell death, inhibit cell proliferation or influence the differentiation of MSCs. Aiming to provide a comprehensive understanding of the interaction between NPs and MSCs, recent progress in the design and preparation of multifunctional NPs is summarized in this review, mechanisms of cellular internalization of the NPs are discussed, the main applications of multifunctional NPs in MSCs are highlighted and overview about cellular response of MSCs to different NPs is given. Future studies aiming on design and development of NPs with multifunctionality may open a new field of applying nanotechnology in stem cell-based therapy.

The regulatory agencies provide recommendations rather than protocols or standard operation procedures for the hemocompatibility evaluation of novel materials e.g. for cardiovascular applications. Thus, there is a lack of specifications with regard to test setups and procedures. As a consequence, laboratories worldwide perform in vitro assays under substantially different test conditions, so that inter-laboratory and inter-study comparisons are impossible. Here, we report about a prospective, randomized and double-blind multicenter trial which demonstrates that standardization of in vitro test protocols allows a reproducible assessment of platelet adhesion and activation from fresh human platelet rich plasma as possible indicators of the thrombogenicity of cardiovascular implants. Standardization of the reported static in vitro setup resulted in a laboratory independent scoring of the following materials: poly(dimethyl siloxane) (PDMS), poly(ethylene terephthalate) (PET) and poly(tetrafluoro ethylene) (PTFE). The results of this in vitro study provide evidence that inter-laboratory and inter-study comparisons can be achieved for the evaluation of the adhesion and activation of platelets on blood-contacting biomaterials by stringent standardization of test protocols.

Controlling mesenchymal stem cells (MSCs) behavior is necessary to fully exploit their therapeutic potential. Various approaches are employed to effectively influence the migration capacity of MSCs. Here, topographic microstructures with different microscale roughness were created on polystyrene (PS) culture vessel surfaces as a feasible physical preconditioning strategy to modulate MSC migration. By analyzing trajectories of cells migrating after reseeding, we demonstrated that the mobilization velocity of human adipose derived mesenchymal stem cells (hADSCs) could be promoted by and persisted after brief preconditioning with the appropriate microtopography. Moreover, the elevated activation levels of focal adhesion kinase (FAK) and mitogen-activated protein kinase (MAPK) in hADSCs were also observed during and after the preconditioning process. These findings underline the potential enhancement of in vivo therapeutic efficacy in regenerative medicine via transplantation of topographic microstructure preconditioned stem cells.

BACKGROUND Occlusions of artificial small-diameter cardiovascular grafts are frequent events after implantation, often caused by clot formations. A main factor is the insufficient hemocompatibility of the inner artificial graft surface, which could be improved by endothelialization. Therefore, one challenge in cardiovascular graft engineering is the establishment of a shear-resistant endothelial cell layer to prevent cell detachment by shear forces after implantation. MATERIALS AND METHODS Recently, very smooth (Rq = 2.37 ± 1.40 nm) poly(ether imide) (PEI) films were introduced as a biocompatible candidate material for cardiovascular devices. In this study the stability of primary human umbilical vein endothelial cell (HUVEC) monolayer was investigated after long-term seeding (nine days) on PEI-films and subsequent exposure to a venous shear stress of 3 dyn/cm2 for up to six hours using the cone-and-plate shearing technique. Cell density, growth pattern and morphology of HUVEC were determined prior and after shearing compared to glass as control substrate. HUVEC adhering to the substrate after shear stress were counted and analyzed by fluorescent staining. Supernatants were collected and secretion profile analysis of vasoactive and inflammatory mediators was performed. RESULTS The cell density on PEI-films compared to the controls was slightly higher after long-term seeding and exposure to shear stress (glass: 71,656 ± 8,830 cells/cm2 and 42,239 ± 5,607 cells/cm2; PEI-film: 64,056 ± 2,829 cells/cm2 and 45,422 ± 2,507 cells/cm2 before and after shear stress, respectively). Actin- and vinculin-staining revealed a scattered re-organization of the cytoskeleton as well as a formation of stress fibers and focal adhesion points. Secretion of prostacyclin and thromboxane A2 was increased after application of shear stress, but no significant differences were detectable between cells growing on PEI-films or glass. Amounts of secreted inflammatory cytokines IL-6 and IL-8 in the supernatant were significantly lower for HUVEC seeded on PEI-films compared to glass before as well as after stress. CONCLUSION The study demonstrated that HUVEC were able to resist exposure to venous shear stress when seeded on smooth PEI-films with typical morphology and adhesion behavior. However, HUVEC adherence on PEI was not yet sufficient to retain a complete cell monolayer after shear stress exposure. Occasionally, single cells or cell plaques were disrupted resulting in cell free areas in the confluent HUVEC layer. Apart from this our data suggest that PEI is a suitable substrate for HUVEC under static and dynamic conditions and therefore a promising candidate material for cardiovascular applications. The next objective is a surface functionalization of the PEI-films in a cell specific manner to reach a functionally confluent, shear resistant HUVEC monolayer.

Hemocompatible materials are needed for internal and extracorporeal biomedical applications, which should be realizable by reducing protein and thrombocyte adhesion to such materials. Polyethers have been demonstrated to be highly efficient in this respect on smooth surfaces. Here, we investigate the grafting of oligo- and polyglycerols to rough poly(ether imide) membranes as a polymer relevant to biomedical applications and show the reduction of protein and thrombocyte adhesion as well as thrombocyte activation. It could be demonstrated that, by performing surface grafting with oligo- and polyglycerols of relatively high polydispersity (>1.5) and several reactive groups for surface anchoring, full surface shielding can be reached, which leads to reduced protein adsorption of albumin and fibrinogen. In addition, adherent thrombocytes were not activated. This could be clearly shown by immunostaining adherent proteins and analyzing the thrombocyte covered area. The presented work provides an important strategy for the development of application relevant hemocompatible 3D structured materials.

Angiogenically stimulated alternative monocytes (aMO2) could be established as cellular release system accelerating the endothelialization of polymers rendering their surfaces hemocompatibility in a short-term study. However, for their clinical application it is essential that aMO2 do not switch back to the MO1 state sustaining their capability as cellular release system over an extended period of time. We explored whether aMO2 can maintain their differentiation state over 21 days in a mono- and in a co-culture with HUVEC. In comparison, the influence of recombinant VEGF-A165 on the endothelialization of biomaterials was assessed including endothelial cell (HUVEC) density, organisation of the endothelial cytoskeleton, cytokine secretion profile and release of prostacyclin, thromboxane A2 and matrix metalloproteinases. In mono-culture aMO2 secreted high amounts of VEGF and other growth factors/cytokines. Co-cultured with HUVEC, aMO2 accelerated the formation of a confluent HUVEC monolayer. Furthermore, no pro-inflammatory cytokines were found, neither in aMO2-mono, nor in co-cultures with HUVEC indicating that the majority of the aMO2 remained stable in their aMO2 state during the 21 days of cultivation. In contrast, the addition of recombinant VEGF-A165 instead of the co-culture with aMO2 resulted in the formation of stress fibres, dissociated marginal filament bands, and a detachment of HUVEC. In addition, the profile of bioactive agents of HUVEC (e.g. prostacyclin, thromboxane A2, matrix metalloproteinases, IFN-γ and TNF-α) was influenced by the VEGF-A165 treatment inducing the detachment of HUVEC. In conclusion, in co-culture with HUVEC aMO2 remained stable in their type 2 state over 21 days confirming the suitability of aMO2 as biological release system for the endothelialization of biomaterial surfaces with constant release of angiogenic factors but without secretion of pro-inflammatory cytokines over three weeks. Therefore, this endothelialization approach seems to be appropriate to improve the hemocompatibility of cardiovascular implant materials in vitro, and proved to be superior to the use of recombinant VEGF-A165.

For in vitro studies assessing the interaction of platelets with implant materials, common and standardized protocols for the preparation of platelet rich plasma (PRP) are lacking, which may lead to non-matching results due to the diversity of applied protocols. Particularly, the aging of platelets during prolonged preparation and storage times is discussed to lead to an underestimation of the material thrombogenicity. Here, we study the influence of whole blood- and PRP-storage times on changes in platelet morphology and function. Blood from apparently healthy subjects was collected according to a standardized protocol and examined immediately after blood collection, four hours and twenty four hours later. The capability of platelets to adhere and form stable aggregates (PFA100, closure time) was examined in sodium citrate anticoagulated whole blood (WB) using the agonists equine type I collagen and epinephrine bitartrate (collagen/epinephrine) as well as equine type I collagen and adenosine-5'-diphosphate (collagen/ADP). Circulating platelets were quantified at each time point. Morphology of platelets and platelet aggregates were visualized microscopically and measured using an electric field multi-channel counting system (CASY). The percentage of activated platelets was assessed by means of P-selectin (CD62P) expression of circulating platelets. Furthermore, platelet factor 4 (PF4) release was measured in platelet poor plasma (PPP) at each time point. Whole blood PFA100 closure times increased after stimulation with collagen/ADP and collagen/epinephrine. Twenty four hours after blood collection, both parameters were prolonged pathologically above the upper limit of the reference range. Numbers of circulating platelets, measured in PRP, decreased after four hours, but no longer after twenty four hours. Mean platelet volumes (MPV) and platelet large cell ratios (P-LCR, 12 fL - 40 fL) decreased over time. Immediately after blood collection, no debris or platelet aggregates could be visualized microscopically. After four hours, first debris and very small aggregates occurred. After 24 hours, platelet aggregates and also debris progressively increased. In accordance to this, the CASY system revealed an increase of platelet aggregates (up to 90 μm diameter) with increasing storage time. The percentage of CD62P positive platelets and PF4 increased significantly with storage time in resting PRP. When soluble ADP was added to stored PRP samples, the number of activatable platelets decreased significantly over storage time. The present study reveals the importance of a consequent standardization in the preparation of WB and PRP. Platelet morphology and function, particularly platelet reactivity to adherent or soluble agonists in their surrounding milieu, changed rapidly outside the vascular system. This knowledge is of crucial interest, particularly in the field of biomaterial development for cardiovascular applications, and may help to define common standards in the in vitro hemocompatibility testing of biomaterials.

The chain length and end groups of linear PEG grafted on smooth surfaces is known to influence protein adsorption and thrombocyte adhesion. Here, it is explored whether established structure function relationships can be transferred to application relevant, rough surfaces. Functionalization of poly(ether imide) (PEI) membranes by grafting with monoamino PEG of different chain lengths (M-n=1kDa or 10kDa) and end groups (methoxy or hydroxyl) is proven by spectroscopy, changes of surface hydrophilicity, and surface shielding effects. The surface functionalization does lead to reduction of adsorption of BSA, but not of fibrinogen. The thrombocyte adhesion is increased compared to untreated PEI surfaces. Conclusively, rough instead of smooth polymer or gold surfaces should be investigated as relevant models.

Endothelial cells lining the lumen of blood vessels serve as a physiological barrier controlling nanoparticle movement from the vasculature into the tissue. For exploring the effect of polymer hydrophilicity on nanoparticle interactions with human umbilical vein endothelial cells (HUVECs) in vitro, a series of monomodal poly[acrylonitrile-co-(N-vinylpyrrolidone)] model nanoparticles with increasing hydrophilicity as related to their increasing content (0–30 mol.%) of N-vinylpyrrolidone (NVP) were synthesized by miniemulsion polymerization. Nanoparticles with a low NVP content were rapidly endocytized into all cells independent from the particle dose with toxic effects only observed at high particle concentrations, while only 10–30% of the cells incorporated particles with ⩾20 mol.% NVP. Since pathologies are often related to inflammation, an inflammatory HUVEC culture condition with IL-1β stimulation has been introduced and suggested to be widely applied for studying nanocarriers, since cellular uptake in this assay was clearly increased for NVP contents ⩾20 mol.%. Importantly, the secretion of functional biological mediators by HUVECs was not relevantly influenced by the nanoparticles for both homeostatic and inflammatory conditions. These findings may motivate concepts for nanocarriers specifically targeted to pathologic regions. Additionally, rapidly endocytized Rhodamin B loaded particles with low NVP content may be explored for cell labeling and tracking.

Linear, side-chain methylated oligoglycerols (OGMe) were recently reported as potential surface passivating molecules for improving the protein resistance of cardiovascular application relevant poly(ether imide) (PEI) membranes. A previously reported in vitro screening under static test conditions allowed an end-point evaluation of the adhesion and activation of adherent thrombocytes performed on the material surfaces and revealed similar levels of thrombogenicity on PEI membranes, functionalized with OGMe and oligo(ethylene glycol) (OEG) of similar molecular weight (Mn = 1,300 g·mol−1 - 1,800 g·mol−1). In the present study, we investigated the hemocompatibility of these materials in a dynamic closed loop system, in order to study time-dependent thrombocyte material interactions also of the circulating thrombocytes by mimicking in vivo relevant flow conditions in a dynamic test system with multiple material contacts. Activation and aggregation of circulating thrombocytes as well as complement activation and plasmatic coagulation were evaluated after 40 circulations of thrombocyte rich plasma in the closed loop system. The results of the dynamic tests revealed no differences between the OGMe and OEG functionalized PEI membranes. Furthermore, no differences were observed between the latter and a PEI membrane treated under the conditions of functionalization at pH 11 (PEI-pH11) without an oligoether being present. Blood plasma protein adsorption, as well as activation, and adherence of circulating thrombocytes occurred in a comparable, but minor manner on all investigated PEI membranes. From this we conclude that the OGMe and OEG surface functionalization did not lead to an improvement of the already good hemocompatibility of the PEI-pH11 membrane.

Polymers exhibiting cell-selective effects represent an extensive research field with high relevance for biomedical applications e.g. in the cardiovascular field supporting re-endothelialization while suppressing smooth muscle cell overgrowth. Such an endothelial cell-selective effect could be recently demonstrated for a copolyetheresterurethane (PDC) containing biodegradable poly(p-dioxanone) and poly(epsilon-caprolactone) segments, which selectively enhanced the adhesion of human umbilical vein endothelial cells (HUVEC) while suppressing the attachment of smooth muscle cells (SMC). In this study we investigated the influence of the fibre orientation (random and aligned) and fibre diameter (2 mu m and 500 nm) of electrospun PDC scaffolds on the adhesion, proliferation and apoptosis of HUVEC and SMC. Adhesion, viability and proliferation of HUVEC was diminished when the fibre diameter was reduced to a submicron scale, while the orientation of the microfibres did only slightly influence the cellular behaviour. In contrast, a submicron fibre diameter improved SMC viability. In conclusion, PDC scaffolds with micron-sized single fibres could be promising candidate materials for cell-selective stent coatings.

The formation of a functionally-confluent and shear-resistant endothelial cell (EC) monolayer on cardiovascular implants is a promising strategy to prevent thrombogenic processes after implantation. On the basis of existing studies with arterial endothelial cells adhering after two hours on gelatin-based hydrogels in marked higher numbers compared to tissue culture plates, we hypothesized that also venous endothelial cells (HUVEC) should be able to adhere and form an endothelial monolayer on these hydrogels after days. Furthermore, variation of the hydrogel composition, which slightly influences the materials elasticity and even more the degradation behaviour, should have no considerable effect on HUVEC. Therefore, the monolayer formation and shear resistance of HUVEC were explored on two gelatin-based hydrogels differing in their elasticity (Young's moduli between 35 and 55 kPa) in comparison to a positive control (HUVEC on glass cover slips) and a negative control (HUVEC on glass cover slips activated with interleukin-1β) after 9 days of culturing. HUVEC density after 9 days of culturing under static conditions was lower on the hydrogels compared to both controls (p

Common strategies for biofunctionalization of surfaces comprise the immobilization of bioactive molecules used as cell-binding ligands for cell recruitment. Besides covalent binding, multivalent noncovalent physical forces between substrate and ligand are an alternative way to equip surfaces with biomacromolecules. In this study, polymer binding ligands are screened by means of a DNA-based in vitro selection process. As candidate biomaterials poly(ether imide) (PEI), polystyrene, and poly[ethylene-co-(vinyl acetate)] are selected, due to their different chemical structure, but similar macroscopic interface properties, allowing physical interaction with nucleotide bases by varying valences. Multivalent interacting aptamers are successfully enriched by SELEX method and an area-wide surface functionalization is achieved, which can be used for further binding of bioactive molecules. In vitro selection against the polymers result in thymine-dominated aptamer binding motifs. The preferential interaction with thymine is attributed to its chemical structure, connected with a decreased electrostatic repulsion of the π-system and the hydrophobic character maximizing entropy. The aptamer binding stability correlates with available valences for interaction, resulting in a more stable functionalization of PEI.

The endothelialization of cardiovascular prostheses is known to improve their haemocompatibility. As such body-foreign materials often do not endothelialize spontaneously. A lot of in vitro studies are ongoing how endothelialization of biomaterials can be improved. In this study the influence of different components of a tissue-typical extracellular matrix (ECM) like laminin, fibronectin or gelatin on the formation of an endothelial cell monolayer and on the shear resistance of adherent cells on these substrates was studied.The study revealed that the density of human venous endothelial cells (HUVEC) monolayers differed markedly between cells grown on a natural ECM and cells grown on singularized components of an ECM (p < 0.001). Only HUVEC grown on laminin showed similar densities and a stress fiber pattern comparable to HUVEC grown on the ECM. HUVEC grown on gelatin- or fibronectin-coated coverslips were less firmly attached to the substrate; frequently individual HUVEC and even groups of cells detached.Concluding it seems that coating of implants with laminin supports the formation of shear resistant endothelial cell (EC) monolayer - superior to other ECM components.

BACKGROUND: Thrombogenicity is one of the main parameters tested in vitro to evaluate the hemocompatibility of artificial surfaces. While the influence of the temperature on platelet aggregation has been addressed by several studies, the temperature influence on the adherence of platelets to body foreign surfaces as an important aspect of biomedical device handling has not yet been explored. Therefore, we analyzed the influence of two typically applied incubation-temperatures (22 degrees C and 37 degrees C) on the adhesion of platelets to biomaterials. MATERIAL AND METHODS: Thrombogenicity of three different polymers - medical grade poly(dimethyl siloxane) (PDMS), polytetrafluoroethylene (PTFE) and polyethylene terephthalate (PET) - were studied in an in vitro static test. Platelet adhesion was studied with stringently characterized blood from apparently healthy subjects. Collection of whole blood and preparation of platelet rich plasma (PRP) was carried out at room temperature (22 degrees C). PRP was incubated with the polymers either at 22 degrees C or 37 degrees C. Surface adherent platelets were fixed, fluorescently labelled and assessed by an image-based approach. RESULTS AND DISCUSSION: Differences in the density of adherent platelets after incubation at 22 degrees C and 37 degrees C occurred on PDMS and PET. Similar levels of adherent platelets were observed on the very thrombogenic PTFE. The covered surface areas per single platelet were analyzed to measure the state of platelet activation and revealed no differences between the two incubation temperatures for any of the analyzed polymers. Irrespective of the observed differences between the low and medium thrombogenic PDMS and PET and the higher variability at 22 degrees C, the thrombogenicity of the three investigated polymers was evaluated being comparable at both incubation temperatures.

Polymer-based microparticles are applied as non-thrombogenic or thrombogenic materials in a wide variety of intra- or extra-corporeal medical devices. As demanded by the regulatory agencies, the hemocompatibility of these blood contacting biomaterials has to be evaluated in vitro to ensure that the particle systems appropriately fulfill the envisioned function without causing undesired events such as thrombosis or inflammation. Currently described in vitro assays for hemocompatibility testing of particles comprise tests with different single cell types (e.g. erythrocytes or leukocytes), varying concentrations/dilutions of the used blood cells or whole blood, which are not standardized. Here, we report about an in vitro dynamic test system for studying the hemocompatibility of polymeric microparticles utilizing fresh human whole blood from apparently healthy subjects, collected and processed under standardized conditions. Spherical poly(ether imide) microparticles with an average diameter of 140±30 μm were utilized as model systems. Reported as candidate materials for the removal of uremic toxins, these microparticles are anticipated to facilitate optimal flow conditions in a dialyzer with minimal backflow and blood cell damage. Pristine (PEI) and potassium hydroxide (PEI-KOH) functionalized microparticles exhibited similarly nanoporous surfaces (PEI: ØExternal pore = 90±60 nm; PEI-KOH ØExternal pore = 150±130 nm) but varying water wettabilities (PEI: θadv = 112±10° PEI-KOH θadv = 60±2°). The nanoporosity of the microparticle surfaces allows the exchange of toxic solutes from blood towards the interconnective pores in the particle core, while an immigration of the substantially larger blood cells is inhibited. Sterilized PEI microparticles were incorporated –air-free –in a syringe-based test system and exposed to whole blood for 60 minutes under gentle agitation. Thereafter, thrombi formation on the particles surfaces were analyzed microscopically. In the collected whole blood the non-adherent/circulating single blood cells were quantified via a differentiated complete blood cell count and the activation of platelets (P-Selectin expression, secretion and release), platelet function (PFA100 closure time) as well as thrombin formation (thrombin-antithrombin-complex) was analyzed. Free hemoglobin (HGB) levels were quantified as a measure of hemolysis. Microscopic evaluation revealed thrombi formation and particle aggregates for all tested microparticles. Reduction of circulating blood cells differed significantly between the particle types. Particularly, platelet and monocyte counts decreased up to 50% compared to the control (syringe filled with whole blood but without microparticles). In accordance, platelet activation, thrombin levels and degrees of hemolysis were clearly elevated in the particle loaded test systems and allowed a differentiation between the particle types. Increased PFA100 closure times (as activating agent a combination of collagen/ADP was used) indicated a similarly reduced ability of platelets to adhere and form stable aggregates independent from the particle type tested. This observation is most probably a consequence of the strong thrombus formation in the test system, which is associated with a reduction of the circulating blood cells. The reported in vitro dynamic whole blood test system allowed the sensitive analysis of the hemocompatibility of polymer-based microparticles and was successfully validated for porous PEI microparticles with different water wettabilities. Beyond the qualitative and quantitative analysis of cell-material interactions, the test also allowed the functional evaluation of platelets in whole blood.