Search

This work presents a detailed RF characterization of 28-nm FD-SOI nMOSFETs at cryogenic temperatures down to 4.2 K. Two main RF Figures of Merit (FoMs), i.e., current-gain cutoff frequency (ft) and maximum oscillation frequency (fmax), as well as parasitic elements of the small-signal equivalent circuit, are extracted from the measured S-parameters. An improvement of up to ~130 GHz in ft and ~75 GHz in fmax is observed for the shortest device (25 nm) at low temperature. The behavior of RF FoMs versus temperature is discussed in terms of small-signal equivalent circuit elements, both intrinsic and extrinsic (parasitics). This study suggests 28-nm FD-SOI nMOSFETs as a good candidate for future cryogenic applications down to 4.2 K and clarifies the origin and limitations of the performance.

This work presents a detailed characterization of 28 nm FDSOI CMOS process at cryogenic temperatures. Electrostatic, Analog and RF Figures of Merit (FoM) are studied. At liquid nitrogen temperatures, 30% to 200% enhancement of drain current, Id, and maximum transconductance, gm_max, values are demonstrated. Current gain cutoff frequency, fT, increase by about 85 GHz is shown. Temperature behavior of analog and RF FoMs is discussed in terms of mobility and series resistance effect. This study suggests 28 nm FDSOI as a good contender for future read-out electronics operated at cryogenic temperatures (as e.g. around qubits or in space).

This paper presents detailed RF characterization of 28-nm FDSOI nMOSFETs at cryogenic temperatures down to 77 K. Two main RF figures of merit (FoM), i.e., current gain cutoff frequency ( $f_{T}$ ) and maximum oscillation frequency ( $f_{\max }$ ), as well as elements of small-signal equivalent circuit are extracted from the measured S-parameters. Increases of $f_{\textit T}$ and $f_{\max }$ by about 85 GHz and about 30 GHz, respectively, are demonstrated at 77 K. The observed behavior of RF FoMs versus temperature is discussed in terms of small-signal equivalent circuit elements, both intrinsic and extrinsic (parasitics). This paper suggests 28-nm FDSOI as a good candidate for future cryogenic applications.

This work studies the self-heating (SH) effect in ultra-thin body ultra-thin buried oxide (UTBB) FDSOI MOSFETs at cryogenic temperatures down to 77 K. S-parameter measurements in a wide frequency range, with the so-called RF technique, are employed to assess SH parameters and related variation of analog figures of merit (FoMs) at different temperatures. Contrary to the expectations, the effect of self-heating on analog FoMs is slightly weaker at cryogenic temperatures with respect to room-temperature case. The extracted thermal resistance and channel temperature rise at 300 K and 77 K in short-channel devices are of the same order of magnitude. The observed increase in SH characteristic frequency with temperature reduction emphasizes the advantage of the RF technique for the fair analysis of SH-related features in advanced technologies at cryogenic temperatures.

This paper presents an experimental analysis of the analog characteristics of self-cascode structures composed by 28 nm technological node ultra-thin body and BOX fully-depleted silicon-on-insulator planar MOSFETs, focusing on the subthreshold operation regime. Apart from the increased gain promoted by the reduction of front gate voltage, there is further improvement when the back-gate bias is used to reduce the threshold voltage of transistor close to the drain of the composite device, making this structure a promising option for low-power low-voltage (LPLV) analog applications.

This work investigates the low-frequency noise performance of a long-channel UTBB FD SOI nMOS transistor operated in triode region as typically used for MOSFET-C filter applications. Measurements of the low-frequency noise have been performed over a large temperature range (25–125°C) at different constant currents above threshold, as a function of the back-gate bias. It is highlighted that in such case, 1/f noise power is dominant, however sufficiently low, in the frequency range of interest for the filters, i.e. below 1 MHz. Noise power strongly reduces with temperature and slightly with positive back-gate bias, which is adequate for the filter tuning.

This work studies, for the first time to the authors’ best knowledge, the self-heating (SH) effect in ultra-thin body ultra-thin BOX (UTBB) FDSOI MOSFETs at cryogenic temperatures down to 77 K. S-parameter measurements in a wide frequency range, with the so-called RF technique, is employed to assess SH parameters and related degradation of analog figures of merit (FoMs) at different temperatures. Contrary to the expectations, the effect of self-heating on analog FoMs is slightly weaker at cryogenic temperatures with respect to room-temperature case. The extracted thermal resistance and channel temperature rise at 300 K and 77 K are of the same order of magnitude. The observed increase in SH characteristic frequency with temperature reduction emphasizes the advantage of the RF technique for the fair analysis of SH-related features in advanced technologies at cryogenic temperatures.

International audience; The negative bias temperature instability (NBTI) is investigated in ultrathin body ultrathin box (UTBB) fully depleted silicon-on-insulator (FD-SOI) p-MOSFETs with zero back gate bias and small drain bias voltage. The threshold voltage shifts during stress at different temperatures and gate bias voltage conditions show that the NBTI is dominated by the trapping of holes in preexisting traps of the gate dielectric, while the recovery transient follows a logarithmic-like time dependence. Considering the hole-trapping/detrapping mechanisms, NBTI modeling has been proposed capturing the temperature and gate voltage dependence.

A detailed study of the hot-carrier degradation in nano-scale fully depleted ultra-thin body and buried oxide n-MOSFETs is presented. The degradation mechanisms were identified based on static current-voltage measurements. The degradation of the transistor was explained by considering generation of traps at the gate dielectric/Si interface and traps located within a tunneling distance of the interface. All stress parameters are considered describing with semi-empirical relations their impact on the transistor parameters. Based on our analytical compact model, we propose an aging hot-carrier model predicting with good accuracy the device degradation stressed under different bias conditions using a unique set of model parameters. Display Omitted The hot-carrier degradation of nanoscale UTBB FD-SOI n-MOSFETs has been investigated under different drain and gate bias stress conditions.The degradation mechanisms have been identified by studying the static current-voltage characteristics measurements.The impact of the HC degradation on the device parameters has been expressed with semi-empirical models in terms of the stress time, channel length, drain bias and gate bias.Based on our analytical compact model, HC aging model is proposed enabling to predict the device degradation stressed under different bias conditions, using a unique set of few model parameters determined for each technology through measurements.

This work provides a detailed study of 28 nm fully-depleted silicon-on-insulator (FD-SOI) planar ultra-thin body and BOX (UTBB) MOSFETs for high frequency applications. All parasitic elements such as the parasitic gate and source/drain series resistances, total capacitances are extracted and their effects on RF performance are analyzed and compared with previous work on similar devices. Two main RF figures of merit (FoM) such as the current gain cut-off frequency ( f T ) and the maximum oscillation frequency ( f max ) are determined. It is shown that f T of ∼280 GHz and f max of ∼250 GHz are achievable in the shortest devices. Based on the extracted parameters, the validation of the small-signal equivalent circuit used for modeling UTBB MOSFETs is investigated by comparing simulated and measured S -parameters.

This work presents a detailed RF characterization of 28 FDSOI nMOSFETs at cryogenic temperatures down to 4.2 K. Two main RF Figures of Merit (FoMs), i.e. current gain cutoff frequency (f T ) and maximum oscillation frequency (f max ), as well as parasitic elements of the small-signal equivalent circuit are extracted from the measured S-parameters. The observed behavior of RF FoMs versus temperature is discussed in terms of small-signal equivalent circuit elements, both intrinsic and extrinsic (parasitics). This study suggests 28 FDSOI nMOSFETs as a good candidate for future cryogenic applications down to 4.2 K and clarifies the origin and limitations of the performance.

This work presents, for the first time to our best knowledge, RF characterization of 28 nm FDSOI CMOS process at cryogenic temperatures including extraction of parasitic elements of small-signal equivalent circuit and two main RF Figures of Merit (FoM), i.e. current cutoff frequency (fT) and maximum oscillation frequency (fmax). Increases of fT and fmax by about 85 GHz and 30 GHz, respectively, are demonstrated at cryogenic temperatures. The observed behavior of RF FoMs versus temperature is analyzed in terms of small-signal equivalent circuit elements. This study suggests 28 nm FDSOI as a good candidate for future cryogenic applications.

This work presents a detailed characterization of 28 nm FDSOI CMOS process at cryogenic temperatures. Electrostatic, Analog and RF Figures of Merit (FoM) are studied for the first time to our best knowledge. At cryogenic temperatures, 20–70% enhancement of drain current, Id, and maximum transconductance, gm_max, values as well as up to 100 GHz increase of cut-off frequency, fT, are demonstrated. Temperature behavior of analog and RF FoMs is discussed in terms of mobility and series resistance effect. This first study suggests 28FDSOI as a good contender for future read-out electronics around qubits.

In this work self-heating and its effect on analogue device parameters are compared in 28 nm technology bulk and FDSOI MOS devices. It is shown that for self-heating characterisation in advanced MOSFETs the RF extraction technique is more suitable than the pulsed I – V . It is found that the thermal resistance is ∼3.4 times higher and the temperature rise is ∼2.5 times higher in 28 nm gate length FDSOI than in bulk. However, in spite of stronger self-heating, FDSOI devices outperform bulk over a wide frequency range. Moreover, device parameters degradation with temperature is attenuated in FDSOI transistors.

The Drain Induced Barrier Lowering (DIBL) behavior in Ultra-Thin Body and Buried oxide (UTBB) transistors is investigated in details in the temperature range up to 150 °C, for the first time to the best of our knowledge. The analysis is based on experimental data, physical device simulation, compact model (SPICE) simulation and previously published models. Contrary to MASTAR prediction, experiments reveal DIBL increase with temperature. Physical device simulations of different thin-film fully-depleted (FD) devices outline the generality of such behavior. SPICE simulations, with UTSOI DK2.4 model, only partially adhere to experimental trends. Several analytic models available in the literature are assessed for DIBL vs. temperature prediction. Although being the closest to experiments, Fasarakis’ model overestimates DIBL(T) dependence for shortest devices and underestimates it for upsized gate lengths frequently used in ultra-low-voltage (ULV) applications. This model is improved in our work, by introducing a temperature-dependent inversion charge at threshold. The improved model shows very good agreement with experimental data, with high gain in precision for the gate lengths under test.

International audience; The hot carrier (HC)-induced traps in nanoscale fully depleted ultrathin body and buried oxide nMOSFETs are investigated by low-frequency noise (LFN) measurements in the frequency and time domains. The measured noise spectra are composed of 1/f and Lorentzian-type components. The Lorentzian noise is due to either generation-recombination noise or random telegraph noise (RTN). Based on the LFN results, the effect of the HC stress on fully depleted silicon-on-insulator MOSFETs is investigated after short- and long-time stress. The capture and emission time constants responsible for the RTN noise were calculated as the average duration time of the high/low drain current state, respectively. Analysis of RTN traps detected in fresh and HC-stressed devices indicates that the RTN amplitude is uncorrelated to the trap time constants, i.e., the impact of the trap depth from the interface is masked by that of the trap location over the channel. The overall results lead to an analytical expression for the RTN amplitude, enabling to predict the RTN changes from the subthreshold to the above-threshold region.

Vmin measurements in 28nm FDSOI technology on 128Mb SRAM bitcells from −40°C to 125°C are reported in this paper. Adding the silicon ageing behavior and the process variability, we have developed a complete model and demonstrated end-of-life SRAM Vmin of 0.6V and 0.5V on 20Mb with 0.120µm2 and 0.152µm2 bitcells, respectively. This is the first report of a such extensive SRAM Vmin assessment at the 28nm node. The construction of write limited bitcells, combined with write assist design technique, was found to be the most efficient way to achieve ultra low Vmin in 28nm FDSOI technology. In addition, Vmin retention below 0.4V is demonstrated in 0.120µm2 bitcells, leading to the enablement of ultra-low leakage bitcells with 2pA/cell in retention mode.

In this paper, we present, for the first time, a detailed investigation of the drain current local variability in advanced n-MOS devices from 28 and 14 nm FDSOI technology nodes. A simple MOSFET compact model is built to reproduce the local variability I d – V g characteristics of paired transistors using a Monte Carlo simulation with normally distributed MOSFET parameters ( V th , β and R sd ).

The Drain Induced Barrier Lowering (DIBL) behavior in Ultra-Thin Body and Buried oxide (UTBB) transistors is investigated in details in the temperature range up to 150°C, for the first time to the best of our knowledge. The analysis is based on experimental data, physical device simulation, compact model (SPICE) simulation and previously published models. Contrarily to MASTAR prediction, experiments reveal DIBL increase with temperature. Physical device simulations of different thin-film fully-depleted (FD) devices outline the generality of such behavior. SPICE simulations, with UTSOI DK2.4 model, only partially adhere to experimental trends. Several analytic models available in the literature are assessed for DIBL vs. temperature prediction. Although being the closest to experiments, Fasarakis' model overestimates DIBL(T) dependence for shortest devices and underestimates it for upsized gate lengths frequently used in ULV (ultra-low-voltage) applications. This model is improved in our work, by introducing a temperature-dependent inversion charge at threshold. The improved model showed very good agreement with experimental data, with high gain in precision for the gate lengths under test.

session poster; International audience; The HC degradation of nanoscale FD-SOI n-MOSFETs has been investigated under the worst bias stress conditions (Vds,stress = Vgs,stress). At high stress voltages the hot carriers injected into the gate dielectric are the main degradation mechanism, superseding the interface degradation. The proposed degradation mechanisms are supported with the interface and gate dielectric trap properties extracted from LFN measurements.

session poster; International audience; A thorough investigation and statistical analysis of the low-frequency (LFN) and random telegraph noise (RTN) in 28 and 14nm FD-SOI CMOS transistors is presented, for the first time. It is shown that the 14nm technology node is improved in terms of threshold voltage fluctuations when compared to the 28nm one. A new analysis method that directly probes the RTN presence is also proposed. Finally, the LFN/RTN impact on the device dynamic variability is presented through CADENCE design suite circuit simulations.

session B8L-E: Variability and Reliability in advanced MOSFETs; International audience; The impact of the dynamic variability due to low frequency and RTS fluctuations on single MOSFET operation from 28nm FD-SOI technology is investigated for the first time. It is shown that, for small rise time of ramp gate voltage, the drain current characteristics I d (V g ) exhibit a huge sweep-to-sweep dispersion due to the low frequency noise. Such a single device dynamic variability, which scales as the reciprocal square root of device area, is added to the static mismatch contribution and could amount up to ≈30% of static variability sources.

In this paper, we study how to boost the performance of FDSOI (Fully-Depleted Silicon On Insulator) devices with High-K and Single Metal gate by using the combination of Ultra-Thin Buried Oxide (UTBOX), Ground Plane (GP) and local back biasing integrated with our hybrid process. The interest of local back biasing is highlighted in term of threshold voltage VT modulation and power management study on the 45 nm 0.374 μm2 bitcells and on the ESD functionality as compared to bulk technology.

International audience; Low-frequency (LF) noise was studied on 28 nm CMOS technology FDSOI devices with ultra-thin silicon film (7 nm) and thin buried oxide (25 nm). The noise level was observed to be strongly dependent on the combination of the front and back gate biasing voltages. This was explained by the coupling effect of both Si/High-K dielectric and Si/SiO 2 interface noise sources (channel/front oxide and channel/buried oxide), in combination with the variation of the Remote Coulomb scattering coefficient α. From comparison of the experimental and simulation results, it is illustrated that the main reason of this dependence is the distance between the charge distribution centroid and the interfaces, which is also controlled by both front and back-gate bias voltages, and the way this distance affects the Remote Coulomb scattering coefficient α. A new LF noise model approach is suggested to include the impact of all these parameters, and also allows us to extract the oxide trap density values for both interfaces.

International audience; Low-frequency (LF) noise has been studied on 28 nm FDSOI devices with ultra-thin silicon film (7 nm) and thin buried oxide (25 nm). A strong dependence of the noise level on the combination of the front and back biasing voltages was observed, and justified by the coupling effect of both Si/High-K dielectric and Si/SiO2 interface noise sources (channel/front oxide and channel/buried oxide), combined with the change of the Remote Coulomb scattering. From comparisons of the experimental and simulation results, it is shown that the main reason of this dependence is the distance of the charge distribution centroid from the interfaces, which is controlled by both front and back-gate bias voltages, and the way this distance affects the Remote Coulomb scattering coefficient a. A new LF noise model approach is proposed to include all these effects. This also allows us to assess the oxide trap density values for both interfaces.

This work investigates experimentally the non-linearities of FDSOI MOSFETs from DC to RF frequencies. The effect of the back-gate bias on non-linearity of the device is studied by means of 2nd and 3rd harmonic distortions (HD2 and HD3) extracted from dc I-V curves as well as from large-signal RF measurements using 1-dB and IP3 points. It is shown that the non-linearity is reduced by applying a positive back-gate bias. The reasons for this reduction are increasing of “effective body factor” and lesser mobility degradation with increase of the positive back-gate bias.

For the first time, the thermal stability of a 28nm FDSOI CMOS technology is evaluated with yield measurements (5Mbit dense SRAM and 1 Million Flip- flops). It is shown that 500°C 2h thermal budget can be applied on a digital 28nm circuit including State-Of- The-Art Cu/ULK BEOL without yield nor reliability degradation. These results pave the way to the introduction of BEOL between tiers in 3D sequential integration while the thermal budget allowed for the top tier is sufficient to lead to high performance device.