Search

Publisher Copyright: © 2022, The Author(s). Direct fire, indirect heat, and extinguishing water cause great damage to cultural assets upon a fire disaster in a library or archive. Conservation and restoration of heat-damaged papers are particularly challenging due to the complexity and severity of the damage. Since valuable originals obviously cannot be used for the development of treatment methods and only to a limited extent for the analysis of the damage, it is necessary to produce model paper materials that have a high degree of similarity to fire-damaged papers, which was addressed in the present study. Three different heating methods were tested to produce model papers of different heating levels. Their altered optical, structural, and chemical properties were analyzed and compared with the results of original fire-damaged samples. The study points out pathways to enable the production of comparable sample materials. Heating between hot plates or in an oven produces papers that have properties quite similar to the originals in terms of surface area, paper structure, cellulose integrity, and interactions with water. Stack heating in the oven has proven to be a particularly effective manufacturing method for larger quantities of model papers.

The prevalence of diabetes has increased over the past years. Therefore, developing minimally invasive, user-friendly and cost-effective glucose biosensors is necessary especially in low-income and developing countries. Cellulose paper-based analytical devices have attracted the attention of many researchers due to affordability, not requiring trained personnel, and complex equipment. This paper describes a microfluidic paper-based analytical device for the detection of glucose in tear with the naked eye. The paper-based biosensor fabricated by laser CO2, and GOx/HRP enzymatic solution coupled with TMB was utilized as reagents. A sample volume of 10 µl was needed for the biosensor operation and the results were observable within 5 minutes. To evaluate the device performance, color intensity-based and distance-based results were analyzed by ImageJ and Tracker. Distance-based results showed a linear behavior in the range of 0.1–0.6 mM with an R2 = 0.967 and LOD of 0.2 mM. The results could be perceived by the naked eye without any need to further equipment or trained personnel in a relatively short time (3–5 minutes). Moreover, glucose concentration could be obtained non-invasively by tears collected by this µPAD.

Is it really better to print everything, including software models, or is it better to view them on screen? With the ever increasing complexity of software systems, software modeling is integral to software development. Software models facilitate and automate many activities during development, such as code and test case generation. However, a core goal of software modeling is to communicate and collaborate. Software models are presented to team members on many mediums and two of the most common mediums are paper and computer screens. Reading from paper or screen is ostensibly considered to have the same effect on model comprehension. However, the literature on text reading has indicated that the reading experiences can be very different which in turn effects various metrics related to reader performance. This paper reports on an experiment that was conducted to investigate the effect of reading software models on paper in comparison with reading them on a computer screen with respect to cognitive effectiveness. Cognitive effectiveness here refers to the ease by which a model reader can read a model. The experiment used a total of 74 software engineering students as subjects. The experiment results provide strong evidence that displaying diagrams on a screen allows subjects to read them quicker. There is also evidence that indicates that on screen viewing induces fewer reading errors.

The existence of pesticide residues in the hydrosphere, biosphere, and anthroposphere can cause acute or chronic diseases and deteriorate the environment. Therefore, efficient detection of pesticide residues is of great significance to prevent food poisoning, control food pollution, and protect human lives by recognizing their distribution and concentration. Herein, a novel smartphone-coupled three-layered paper-based microfluidic chip is proposed as a facile platform to detect the pesticides. The stereoscopic capillary-driven fluid transport is enabled by the three-layered microfluidic chip configuration. The detection mechanism is based on the enzyme inhibition reaction and the chromatic reaction. The detection results are obtained by a smartphone and figured out by colorimetric quantitative analysis. Taking advantages of the above merits, we demonstrate the utilization of this smartphone-coupled three-layered paper-based microfluidic chip for the effective analysis of typical pesticides (profenofo and methomyl). The linear ranges of profenofo and methomyl are 0.27-2.1 μmol L

Point-of-care testing (POCT), as a portable and user-friendly technology, can obtain accurate test results immediately at the sampling point. Nowadays, microfluidic paper-based analysis devices (μPads) have attracted the eye of the public and accelerated the development of POCT. A variety of detection methods are combined with μPads to realize precise, rapid and sensitive POCT. This article mainly introduced the development of electrochemistry and optical detection methods on μPads for POCT and their applications on disease analysis, environmental monitoring and food control in the past 5 years. Finally, the challenges and future development prospects of μPads for POCT were discussed.

A series of new coloring materials in nanoscale based on 5-(2-aminothiazol-5-yl) thiazol-2-amine and 5-(4-aminophenyl) thiazol-2-amine were synthesized. The nanoscale pigments were prepared using a grinding high˗energy ball-milling technique. X-ray diffraction and transmission electron microscopy were employed to determine the particle size of the nanoscale pigments (40–80 nm). The synthesized pigments in normal and nanoscale were applied in the printing of polyester fabrics. The fastness and colorimetric properties of the printed samples were carefully studied. Additionally, the synthesized pigments were applied as water-based flexographic ink for paper and carton. The hue of the color pigments L*, a*, b*, glossiness, and fastness to light were measured. The comparison of the new heterocyclic benzidine analogs in normal and nanoscale with commercial benzidine pigments demonstrated better results, particularly for the nanoscale pigments.

SummaryInhibitors of the cyclin-dependent kinases 4/6 (CDK4/6i) have been practice-changing and are now considered the standard of care in combination with endocrine therapy for the first- or second-line treatment in advanced hormone-receptor-positive, human epidermal growth factor receptor 2‑negative breast cancer. Recently, CDK4/6i have also emerged as an appealing targeted cancer therapy in early breast cancer, however results of large clinical trials are controversial. This position paper summarizes the evidence, and provides guidance for clinical practice.

The blend (wax M) of crude by-product polyolefin wax (wax K) and a fractionated commercial paraffin wax (wax J) was suggested to replace the wax J as a coating agent for wax-coated papers. The rheological properties of waxes J, K, and M were examined and compared. The correlation between viscosity and shear rate applied on these waxes maintained at 90 oC and 130 oC was identified. In particular, this paper, for the first time, presented non-Newtonian shear thinning behavior of not only wax K but also its blend of wax M in terms of their viscosity affected by shear rate at an operating temperature below their melting temperature of higher-melting-temperature DSC endothermic peaks (HMTEPs). They showed non-Newtonian behavior, so-called shear thinning behavior, at 90 oC in the light of characteristics of both suspension systems and polymer systems. In addition, the profiles of viscosity at 130 oC of all the waxes versus the shear rate exhibited Newtonian fluid behavior. Wax J also showed the behavior of a dilatant fluid. Then, the physical properties including water vapor transmission rates (WVTR), surface roughness, and coated weights, of thin papers coated with waxes J (WJP), K (WKP), and M (WMP) were evaluated, characterized, and compared. As a result, WMP had an equivalent value to that of WJP or the lowest value among wax-coated papers in terms of WVTR. The surface roughness and the barrier property of WVTR were minimized and enhanced, respectively, by blending waxes J and K. The additional physical properties, including dynamic contact angles, surface tension, wet and dry tensile strength, optical examination of the wax-coated fiber structure, and antimicrobial properties of the wax-coated papers, were evaluated. The excellent antimicrobial properties of clinoptilolite added to wax J or wax M appeared.

Iron is an important micronutrient involved in several mechanisms in the human body and can be an important biomarker. In this work, a simple and disposable microfluidic paper-based analytical device (µPAD) was developed for the quantification of iron in urine samples. The detection was based on the colorimetric reaction between iron(II) and bathophenanthroline and the reduction of iron(III) to iron(II) with hydroxylamine. The developed µPAD enabled iron determination in the range 0.07–1.2 mg/L, with a limit of detection of 20 µg/L and a limit of quantification of 65 µg/L, thus suitable for the expected values in human urine. Additionally, targeting urine samples, the potential interference of the samples color was overcome by incorporating a sample blank assessment for absorbance subtraction. Stability studies revealed that the device was stable for 15 days prior to usage and that the formed colored product was stable for scanning up to 3 h. The accuracy of the developed device was established by analyzing urine samples (#26) with the developed µPAD and with the atomic absorption spectrometry method; the relative deviation between the two sets of results was below 9.5%. Graphical abstract: [Figure not available: see fulltext.]

The adsorption of locust bean gum (LBG) onto Northern Bleached Softwood Kraft (NBSK) pulp improved paper tensile and burst strength and lowered refining energy by strengthening inter-fibre bonding. Adsorption kinetics and isotherms were investigated to develop a fundamental understanding of the adsorption mechanism. The adsorption rate followed pseudo-second-order kinetics and the activation energy was 99.34 kJ·mol−1, suggesting chemisorption. The adsorption rate constant increased rapidly with temperature from 25 to 45 °C (k = 1.93 to 24.03 g·mg−1·min−1), but the amount adsorbed at equilibrium decreased (qe = 1.91 to 0.48 mg·g−1 o.d. fibre). LBG adsorption to NBSK at 25 °C was consistent with the Langmuir adsorption model for LBG n = 5.00, and the equilibrium constant Kf = 2.57 mg·g−1·(mg·L−1)−1/n at 25 °C. Favorable adsorption conditions for negatively charged LBG were identified: 25 °C for 10 min, low dosage level ( 150 r.p.m.), acidic or neutral conditions (pH 2–7) without salt addition. Graphic abstract

Free-standing reduced graphene oxide (rGO) papers were prepared by chemical reduction, thermal reduction and combined chemical-thermal reduction, respectively. Four-point probe and nanoindentation experiments were conducted to investigate the electrical and mechanical properties of rGO papers. The rGO paper prepared by soaking in L-ascorbic acid and thermal annealing in argon at 1000 °C (labeled rGO-AsA-T) showed superior electrical and mechanical properties when compared with rGO papers prepared merely by chemical reduction or thermal reduction. The as-prepared rGO-AsA-T paper exhibited an electrical conductivity of 5.7 × 104 S/m, showing an increase of 90% compared to that in the thermally annealed rGO paper and nearly 40 times that of rGO paper reduced by L-ascorbic acid. It was also found that the rGO-AsA-T paper had the lowest elastic modulus of 288 MPa, showing enhanced flexibility. The nearly free voids in rGO-AsA-T paper proved by scanning electron microscopy (SEM) were due to the capillary action in chemical reduction and were significant in improving the electrical conductivity and flexibility of the paper. The rGO-AsA-T paper with high conductivity and flexibility has a promising application in flexible electronics.

We aimed at producing sodium carboxymethylcellulose (CMC) from waste paper cellulose. For this etherification, the raw material was waste paper, the cellulose was initially alkalized with NaOH, the etherifying agent was sodium chloroacetate, and the reaction medium was water or ethanol. The method provided by us, i e, a method for preparing CMC from waste paper, was environment-friendly, could be easily implemented, and could be conveniently applied to make waste paper efficiently used with high profit, and to expand the range of usable raw materials for CMC production. We successfully synthesized CMC and prepared CMC plastic membrane. This practice changes waste into valuables, which is beneficial to our living environment. For preparation of CMC, one of the crucial factors is appropriate pretreatment of the cellulose from waste paper. The pretreatment was done with a self-built hydrolysis method. We experimentally examined the effects of the mass ratios of reactants, reaction temperature, time, and reaction environment of homogeneous or heterogeneous on CMC yield. The innovative points of this research could be stated as follows: the reaction activity of cellulose was improved by pre-hydrolysis; synthesizing CMC with cellulose from waste paper changes waste into valuables is beneficial to our living environment; and a freezing treatment for the cellulose-alkali mixture was innovatively added. The effects were exhibited by a desired final conversion efficiency.

Infections caused by resistant microorganisms are a complex global public health challenge, and the way to combat the increase of resistance is the development of more modern and faster techniques for resistance detection. This study aimed to evaluate the transport of inactivated bacteria impregnated in a filter paper disk to detect carbapenem resistance genes by multiplex real-time PCR (qPCR) using high-resolution melting (HRM). A total of 88 isolates of 10 different species of Enterobacterales harboring well-characterized carbapenem resistance genes were evaluated. A full 10-µL loop of fresh growth of bacteria were impregnated in a filter paper disk, which was left at room temperature for 2 days in order to simulate the time spent in transportation. Bacterial inactivation was performed with 70% ethanol at 15 min. Afterwards, the DNA was extracted from the paper disks for further analysis by qPCR HRM. The time of 15 min in 70% ethanol was enough to inactivate all the isolates tested. It was possible to correctly identify the presence of the carbapenem resistance gene by HRM qPCR in 87 isolates (98.87%) that were transported in the filter paper disks. Our results indicated that it is possible to use filter paper to transport inactivated bacteria and to identify carbapenem resistance genes by qPCR HRM. This alternative tends to facilitate the access to this technology by many laboratories which do not have the qPCR equipment.

The potential of alkaline cellulo-xylanolytic enzymes from non-pathogenic Bacillus subtilis strain was tested for deinking of photocopier waste paper. Cellulase and xylanase play a crucial role in deinking of different types of waste paper. Partial purification of cellulo-xylanolytic enzymes was carried out using ultrafiltration followed by ammonium sulfate precipitation. The ultrafiltered enzyme was used for deinking the photocopier waste paper along with chemical deinking. An enzyme dose of 0.6 IU/g and reaction time of 60 min for ultrafiltered cellulo-xylanolytic enzyme significantly increased deinking efficiency, tear index (9.52%) and folding endurance (5±2%) as compared to chemical deinking. There was improvement in strength properties such as tear index and double-fold along with freeness of pulp (18%). There was slight decrease in tensile index (0.6%) and burst index (16%) while ISO brightness remained unaffected. Enzymatic deinking (74.3%) by ultrafiltered cellulo-xylanolytic from Bacillus subtilis was found significant over conventional chemical deinking.

In this research work, we present a synthesis of silver and cobalt bimetal nanoparticles stabilized by a carboxymethyl cellulose biopolymer (CMC-AgCo) and its coating on a cellulose filter paper (CFP) to prepare the dip-catalyst. All the prepared samples were subjected to characterization by scanning electron microscopy for surface morphology, EDX, XRD and thermogravimetric analysis. The catalytic properties of the CFP/CMC-AgCo as dip-catalysts were evaluated in the reduction of organic nitroaromatic pollutants of 2,6-dinitrophenol to 2,6-diaminophenol as well as the 4-nitrophenol to 4-aminophenol. It was found that the reduction reaction advanced with the pseudo-first-order kinetics. The CFP/CMC-AgCo catalyzed the 2,6-diaminophenol and 4-nitrophenol with a reaction rate constant of 0.1244 and 0.177 min− 1, respectively. The separation of the CFP/CMC-AgCo was easy as it required a simple pulling of the strip from the reaction medium. Importantly, the catalytic reaction rates and conversion percentages of the two nitroaromatics were well-maintained for multiple times during recycling experiments.

The outbreak of new viral strains promotes advances in universal diagnostic techniques for detecting infectious diseases with unknown viral sequence. Long double-stranded RNA (dsRNA), a hallmark of infections, serves as a virus marker for prompt detection of viruses with unknown genomes. Here, we report on-chip paper electrophoresis for ultrafast screening of infectious diseases. Negatively charged RNAs pass through the micro and nanoscale pores of cellulose in order of size under an external electric field applied to the paper microfluidic channel. Quantitative separation of long dsRNA mimicking poly I:C was analyzed from 1.67 to 33 ng·μL−1, which is close to the viral dsRNA concentration in infected cells. This paper-based capillary electrophoresis chip (paper CE chip) can provide a new diagnostic platform for ultrafast viral disease detection at the point-of-care (POC) level.

Environmental and health concerns are driving food packaging to reduce the use of poly- or perfluorinated compounds and petroleum-based polymers. Here, we successfully obtained good oil-proof paper by combining cellulose nanofibril (CNF) film with filter paper through film transfer. The process was not only facile but also did not require chemical reagents other than water. To achieve the kit number 12, the basis weight of the CNF film was 2.1 g/m2, which was much less than the amount required for coating. The calendering process further reduced the pores thus improving the oil resistance of the film transfer paper. At a calendering pressure of 20 N/mm, only 1.4 g/m2 of the CNF film was required for kit number 12. This study provides a new way for the application of CNF in the field of oil resistance.

We demonstrated the thermally robust reduced graphene oxide (rGO)/boron nitride nanotube (BNNT) papers and their application in electromagnetic interference shielding. In order to overcome the thermal durability shortcomings of electromagnetic wave shielding paper based on rGO nanomaterial, rGO/BNNT electromagnetic interference (EMI) shielding paper having excellent thermal durability could be manufactured using BNNT nanomaterials having excellent chemical and thermal stability at high temperature. With the addition of a little BNNT, the durability against temperature can be increased by more than two times while there is little reduction in EMI performance.

Excellent mechanical and electrical properties of graphene-based paper-like materials are essential for applications in flexible conductors, energy-storage devices, etc. The graphene oxide (GO) supernatant separated by centrifugation and ultrasonication has been used to prepare graphene oxide paper and reduced graphene oxide paper (rGOP) with high strength and conductivity. However, this method has cumbersome steps and low supernatant concentration, which greatly increases time and energy consumption, and is not suitable for rapid batch preparation of high-strength and high-thickness rGOP. Herein, a high-speed mechanical shearing method has been used to efficiently exfoliate graphite oxide suspension into high-concentration GO slurry with large lateral size, and rGOP has been further prepared by blade coating and HI acid chemical reduction. Compared with the product prepared by ultrasonic exfoliation method, the average area of GO sheets obtained via the mechanical shear exfoliation method can reach around 16.31 μm2. As a result, the mechanical properties and conductivity of the prepared rGOP have been increased by 30% and 23.5%, respectively, with the tensile strength and electrical conductivity of 478.2 MPa and 208.4 S/cm being obtained. The developed method is of great significance for the large-scale production and emerging applications of lightweight and high-performance rGOP.

The impact of volatile organic compounds (VOCs) and odor on indoor environment and people has attracted much attention. To reduce this problem of odorous compounds contained in wood panel, this study focused on identifying odorant compounds and exploring the influence of moisture content factors on VOCs and odor emissions. Paper mulberry (Broussonetia papyrifera (L.)Vent.) was investigated using the technology of gas chromatography-mass spectrometry/olfactory (GC–MS/O). Total volatile organic compounds (TVOC) and characteristic odor-active compounds were studied, and the emission of heartwood and sapwood of paper mulberry was compared at the same time. It was found that the main components from heartwood and sapwood were aromatics, alkanes, alkenes, aldehydes ketones, alcohols and esters. Totally, 23 kinds of odor-active compounds were identified from heartwood and sapwood of paper mulberry, among which, aromatics and aldehydes ketones were the main odorant compounds. Seven kinds of key odorant compounds were identified in this process. With the decrease in moisture content, the TVOC and total odor intensity of heartwood and sapwood generally decreased. The moisture content had a great effect on VOC release when the moisture content decreased from 70 to 50% and reduced from fiber saturation point (30%) to air saturation point (10%). The main odor impressions of paper mulberry were aromatic, fresh fruit fragrance, sweet scent and special pungent. In the whole process of moisture content decrease, the TVOC, concentration of odorant and odor intensity of sapwood were higher than that of heartwood.

Graphical abstract Enzyme-linked immunosorbent assay (ELISA) is widely used for the detection of disease biomarkers. However, it utilizes time-consuming procedures and expensive instruments, making it infeasible for point-of-care (POC) analysis especially in resource-limited settings. In this work, a multicolorimetric ELISA biosensor integrated on a paper/polymer hybrid microfluidic device was developed for rapid visual detection of disease biomarkers at point of care, without using costly equipment. This multicolormetric ELISA platform was built on multiple distinct color variants resulted from the catalytic oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) and the etching of gold nanorods (AuNRs). The vivid color changes could be easily distinguished by the naked eye, and their red mean values allowed quantitative biomarker detection, without using any sophisticated instruments. When this multicolorimetric ELISA was integrated on a paper/polymer hybrid analytical device, it not only provided integrated processing and high portability but also enabled fast assays in about 50 min due to the unique advantages of paper/polymer hybrid devices. The limit of detection of 9.1 ng/μL of the hepatitis C virus core antigen, a biomarker for hepatitis C, was achieved using this multicolorimetric ELISA platform. This multicolor ELISA analytical device provides a new versatile, user-friendly, affordable, and portable immunosensing platform with high potential for on-site detections of various viruses, proteins, and biomarkers for low-resource settings such as at home, public venues, rural areas, and developing nations. Supplementary Information The online version contains supplementary material available at 10.1007/s00216-021-03359-8.

A simple electrochemical approach has been strategically developed for in situ generations of ZnO nanoparticles using Zn rods as electrodes and hydrogen peroxide as the oxidant without the formation of any by-product. These ZnO nanoparticles were extended for remediation of pollutants present in paper mill effluents, and separation efficiency was found to be above 90% for hydrocarbons, 92% for lignin, 99% for phenol, and 93% of chemical oxygen demand (COD), as confirmed by gas chromatography-mass spectrometry and COD analysis. It was also observed that the experimental setup could successfully remove 99% of the color from the sample. These ZnO nanoparticles have been proven in the past to be antibacterial and were explored for its ability to inhibit the growth of both Gram-positive and Gram-negative bacteria in the effluent samples after the removal of toxic pollutants. Therefore, we proposed an electrochemical reaction for the in situ synthesis of ZnO nanoparticles for remediation of paper mill effluent as well as inhibit the bacterial growth in the treated effluent sample.

Due to their unique properties, paper-based biosensors have attracted attention as inexpensive devices for on-site analysis. To achieve fast and sensitive detection of analytes, immobilization of enzymes with high apparent activities on paper is highly desirable; however, this is challenging. Herein, we report an improved approach to attach a malathion degrading enzyme, PoOPHM9, on paper via an interlocking network of Pluronic F127 (PF127)–poly(acrylic acid)–enzyme conjugates. The addition of PF127 improved retention of enzymatic activity as the apparent kinetic constant Vmax of the immobilized enzyme increased two-fold compared with the paper prepared without PF127. The PF127–poly(acrylic acid)–PoOPHM9 papers provided rapid colorimetric detection of malathion at 0.1–50 mM. The detection was completed within 5 min using a smartphone and image analysis software. As a proof-of-concept, malathion-contaminated water, plant, and apple samples were analyzed with the papers successfully. This material is promising for on-site rapid analysis of malathion-contaminated samples.

In this research, simultaneous quantification of cysteine (Cys) and histidine (His) using a paper-based sensor was investigated for the first time. A microfluidic paper-based sensor is a promising amino acid determination tool due to its low cost, low sample consumption, and fast analysis and is easy to make. We used SBA-15 as porous materials that are crystalline compounds formed with surfactants and TEOS as a silica source. The SBA-15 sample was characterized by X-ray diffraction, Fourier transform infrared, and scanning electron microscope techniques. The microfluidic paper-based sensors were fabricated using a wax pen, and the mesoporous SBA-15 modified filter paper. The fabricated sensors for Cys and His determination are operated based on an indicator-displacement assay. A comparative determination study of Cys and His on the sensors was carried out. The results illustrated that the addition of silica nanoporous material led to an immediate and uniform color change. The sensors were successfully exploited in the simultaneous determination of urinary Cys and His levels, thus providing the potential opportunity for clinical diagnosis. The linear range of 1.0 to 90.0 μM and 1.0 to 100 μM for His and Cys was obtained from the calibration data. The detection limits were also calculated (S/N = 3) for His and Cys of 0.5 μM and 1.5 μM, respectively. The proposed method showed a good agreement with the results achieved by a standard method.

This study focused on the applying endo-xylanases to reduce the use of bleaching agent, coupled with the production of xylooligosaccharides (XOs), in mulberry paper making. Paper mulberry pulp (PMP) was consecutively prepared from paper mulberry bark by traditional NaOH-treatment, and two types of thermostable endo-xylanase from Streptomyces thermovulgaris TISTR1948 (wild-type and recombinant endo-xylanases) were employed in the biobleaching of PMP. This process was optimized to achieve maximum XOs yields and the highest PMP quality. The optimal condition was an enzyme dosage of 125 U/g PMP at 12 h of reaction time, both in a 500 mL laboratory bottle and a 150 L reactor. The mixture obtained from the reactor was separated as liquid of XOs derived from PMP (PMP-XOs) and solid biobleached PMP. The PMP-XOs from wild-type endo-xylanase were composed of 31.6% xylopentaose (X5), 30.9% xylohexaose and higher-degree XOs (X ≥ 6), and 11.7% xylobiose (X2), whereas 76.6% of X5 and 8.6% of X2 were the main products from recombinant endo-xylanase. The PMP-XOs derived from both endo-xylanase types exhibited high antioxidant activities, reducing power, phenolic contents, and prebiotic efficacy. In addition, the application of both endo-xylanases enhanced the brightness of PMP by 5.1% and 3.5%, and reduced the kappa number by 9.1% and 3.6%, respectively. Biobleached PMP was subsequently subjected to the NaOCl bleaching step to produce the mulberry paper. This approach could reduce NaOCl consumption by 20–25%, making it an environmentally friendly alternative. The production of valuable prebiotics, such as PMP-XOs, further enhances the economic viability of this approach.

A high-barrier, strong, and antibacterial paper was fabricated by coating the acetylated cellulose solution with different contents of cinnamaldehyde (CIN) on Kraft paper. The antibacterial, antioxidant, mechanical, and barrier properties of coated paper were investigated. When the amount of CIN added in coating reached 6% v/v, the coated paper exhibited excellent antioxidant activity and antibacterial activity against Escherichia coli and Staphylococcus aureus. Notably, the dry and wet tensile strength of paper after coating was increased by 26.4 and 10.6 MPa, respectively. Furthermore, the coated papers' barrier properties against oil, water, water vapor, and oxygen were dramatically improved, especially for the water barrier rate up to 96.4%. Our coated papers with over 6% v/v CIN could extend beef's shelf-life for at least 4 days, which exhibited a promising prospect in eco-friendly antibacterial packaging.

The problem of utilizing and processing cellulose and mineral fibrous waste contained in sludge obtained following mechanical treatment of wastewater from the production of paper and cardboard from recyclable materials is analyzed. A technology for producing a cellulose-mineral sorbent from this type of waste to mitigate emergency spills of oil and oil products is described. It is shown that an affordable, fast-acting and convenient sorbent can be produced from these wastes, having sufficient sorption capacity and the ability to retain oil products. The contaminated material can be safely and economically reclaimed or destroyed following use. Mechanisms for activating sorption properties, along with the composition, properties, and options for practical application of the sorbent, are considered.

Materials containing silver nanoparticles (AgNPs) are of great interest for household uses, including drinking water disinfection. Although various Ag-containing materials are available, the development of low-cost, reusable, and durable systems is a challenge in water disinfection. Herein, we developed a low-cost, reusable, and durable cellulose filter paper (CFP) containing AgNPs decorated with a tannic acid (TA) and chitosan (CS) matrix (CFP-CSTAAg). The formation of CFP-CSTAAg composite was confirmed by FTIR, and XRD techniques. The formation of CSTAAg composite on CFP greatly improved the mechanical performance. CFP-CSTAAg is driven by gravity of 100 ml of a water sample containing Staphylococcus aureus for 30 min. The composite showed 99 % killing efficiency of bacteria as the bacteria cells did not pass through composite. The low-cost CFP-CSTAAg composite was reusable, providing a 98 % bacteria-killing capacity after five treatment cycles. The product’s properties make reusable CFP-CSTAAg composite a promising filter for durable water disinfection as it is a low-cost material and eco-friendly.

Dual-purpose coated paper, which enables in-line inkjet printing with web offset, can be used for both offset and inkjet prints. This product has potential to meet the ever-increasing demand for printing individualized information on commercial printing materials. In this work, commercial samples were printed in the two presses. It was deduced that low permeability correlates with large color gamut volume. The correlation would be useful to design coating formulations for good printability. Also, we examined the packing of coating layers to identify a coating formulation that provides good printing quality in both offset and inkjet printing. Many combinations of pigments were tested, and the effects of particle shape on viscosity and packing were examined. For all coating colors, pigment mixtures with a weight ratio of 3:1 gave the highest packing density. The mixture of GCC 90 and delaminated clay with a weight ratio of 3:1 was the best selection studied for dual-purpose coated paper. Among commercial paper samples, a web offset coated paper showed the best overall performance, indicating that coating formulations with minimal blistering are suitable for dual-purpose coated paper.

The salivary glands are closely associated with stress conditions and the neuroendocrine system. The concentrations of these salivary biomarkers fluctuate with a person’s disease status. Until now, salivary diagnostics have been promising; however, the analytical tools for detecting salivary biomarkers have remained burdensome due to the lack of user-friendly and cost-effective equipment. In this study, we used a microfluidic starch-coated paper-based chip to isolate ɑ-amylase from human saliva. The concentration of ɑ-amylase on the head and tail sections of the paper-based chip was compared in the presence or absence of starch. We found that ɑ-amylase was highly concentrated only in the head section of the starch-coated paper-based chip through Western blotting (WB) and enzyme-linked immunosorbent assay (ELISA). We expect our designed paper-based chip will aid in α-amylase detection technologies using saliva and small amounts of other biofluids including blood, tears, pancreatic juice, and urine.

Organic dyes are used in many industries, e.g., textile, cosmetics and food. Hence, contamination of organic dyes to water sources is a critical issue. To reduce water pollution by organic dyes, we propose a paper-like adsorbent with a practical and economical production procedure. Subsequently, a flexible adsorbent was produced using a one-step approach by vacuum filtration of graphene oxide (GO) and iron oxide nanoparticles (Fe3O4-NPs) containing dispersion through a membrane and quoted as GO/Fe3O4 paper. For comparison, GO paper was also prepared using the same procedure. Both papers were characterized using UV–VIS absorption spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, electron diffraction X-ray analysis, X-ray photoelectron spectroscopy, and powder X-ray diffraction techniques. At the steady-state conditions, GO/Fe3O4 and GO papers were performed as adsorbent for cationic dyes of methylene blue, neutral red, and anionic dyes of methyl orange and fluorescein. In general, the removal efficiency of GO/Fe3O4 paper was higher than that of GO paper for adsorption of all dyes and this adsorbent revealed satisfactory adsorption properties for cationic dyes when compared to anionic dyes.

Magnetic Resonance Imaging linear-accelerator (MRI-linac) equipment has recently been introduced to multiple centres in Australia and New Zealand. MRI equipment creates hazards for staff, patients and others in the MR environment; these hazards must be well understood, and risks managed by a system of environmental controls, written procedures and a trained workforce. While MRI-linac hazards are similar to the diagnostic paradigm, the equipment, workforce and environment are sufficiently different that additional safety guidance is warranted. In 2019 the Australasian College of Physical Scientists and Engineers in Medicine (ACPSEM) formed the Magnetic Resonance Imaging Linear-Accelerator Working Group (MRILWG) to support the safe clinical introduction and optimal use of MR-guided radiation therapy treatment units. This Position Paper is intended to provide safety guidance and education for Medical Physicists and others planning for and working with MRI-linac technology. This document summarises MRI-linac hazards and describes particular effects which arise from the combination of strong magnetic fields with an external radiation treatment beam. This document also provides guidance on safety governance and training, and recommends a system of hazard management tailored to the MRI-linac environment, ancillary equipment, and workforce.

Purpose The most abundant among the separately collected waste materials in Italy is food waste. This research aims to evaluate the influence of the type of collection bag on the food waste management chain. In Italy, the food waste collection is mainly based on bioplastic bags. As an alternative, a new type of recycled paper bag shows potential advantages. Methods The two types of collection bag were compared evaluating the weight loss of food waste during the household storage, by means of an experimental assessment simulating the domestic dynamic bag filling. Moreover, the biomethane production of bags under anaerobic conditions was measured at the lab-scale level with Biochemical Methane Potential (BMP) tests. Results During the household storage, the breathable fabric of the paper allows for higher weight losses, ranging on average between + 29 and + 44% compared to bioplastic. BMP tests, carried out under different conditions (temperature, inoculum), showed a 2–14 times higher generation of methane by paper bags compared to bioplastic bags, when referred to 1 kg of inserted food waste. Conclusions Collecting the food waste inside paper bags shows advantages compared to the use of bioplastic bags. First, the waste collection is benefitted thanks to the lower weight of material to be transported to treatment plants, leading also to the possibility of decreasing the collection frequency. Moreover, paper resulted more compatible than bioplastic with the anaerobic digestion treatment, which is currently rapidly increasing as a food waste management option. Graphic Abstract

This paper is aimed to develop a hybrid model (PCA-ANN) to predict the extractive content in eucalyptus wood clones. The input variables to the virtual analyzer are planting parameters available from the forest inventory, therefore the prediction does not rely on laboratory analysis of the wood samples, affording a quick estimate of the extractive contents. This study further bridges the literature gap on the investigation of the cause of variability of extractive content in eucalyptus wood. The PCA-ANN was identified from experimental data to predict and monitor the extractive content, since laboratory measurements can take several days and become available only after wood processing. The experimental data contained information on ten species of eucalyptus clones from five regions in the extreme south of Bahia, Brazil. Principal Component Analysis (PCA) firstly assessed the impact of planting variables on the extractives content. The variability of the data was represented by eight principal components and the variables that mostly contribute to the extractive content are: potential acidity, iron, saturation of aluminum, magnesium, pH, base saturation, remaining phosphorus, zinc, manganese and copper. The artificial neural network (ANN) with the 8 principal components in the input layer showed that the PCA could effectively reduce the dimensionality of the data. For practical purposes, though, the ANN with 10 input variables and 16 neurons in the hidden layer, presenting an average relative deviation of 1.5%, is recommended. The prediction of the extractive content is essential to allow preventive management practices toward the improvement of yield and quality of the cellulosic pulp.

It remains a challenge to prepare special engineering paper with excellent mechanical properties, high temperature resistance and chemical resistance. The emergence of high-performance fiber provides support for the technical progress of special engineering paper. Herein, a novel method to obtain a novel self-reinforced poly (ether ether ketone) (PEEK) composite paper (SR-DI-PEEK/paper) by vacuum filtration, impregnation and hot pressing. Specially, PEEK fibers were used as the skeleton fiber and a small amount of aramid pulp was added as the decanted fiber. By optimizing the process of SR-DI-PEEK/paper preparation, the best mechanical properties of SR-DI-PEEK/paper was presented. Compared with the composite paper prepared with Phenolic solution (PF-PEEK/paper) and Polyimide solution (PI-PEEK/paper), the mechanical properties of SR-DI-PEEK/paper was significantly improved. In particular, when the concentration of impregnation was 3 wt%, the tensile index of SR-DI-PEEK/paper reached 51.10 N m g−1 (tensile strength 47.16 kN m−1), which is 16.48 times than that of the un-impregnated PEEK/paper (2.86 kN m−1). SR-DI-PEEK/paper also exhibited excellent chemical resistance among acid, alkali, and polar solvents, while the tensile index maintained 96.3% after 40 wt% H2SO4 treatment. Besides, SR-DI-PEEK/paper showed superior thermal performance, while the temperatures corresponding to the weight loss of 5% were 574 °C.

Microfluidic paper-based analytical devices (μPADs) have developed rapidly in recent years, because of their advantages, such as small sample volume, rapid detection rates, low cost, and portability. Due to these characteristics, they can be used for in vitro diagnostics in the laboratory, or in the field, for a variety of applications, including food evaluation, disease screening, environmental monitoring, and drug testing. This review will present various detection methods employed by μPADs and their respective applications for the detection of target analytes. These include colorimetry, electrochemistry, chemiluminescence (CL), electrochemiluminescence (ECL), and fluorescence-based methodologies. At the same time, the choice of labeling material and the design of microfluidic channels are also important for detection results. The construction of novel nanocomponents and different smart structures of paper-based devices have improved the performance of μPADs and we will also highlight some of these in this manuscript. Additionally, some key challenges and future prospects for the use of μPADs are briefly discussed.

All-cellulose paper-based composites with underwater superoleophobicity and high-wet-strength were developed by casting a barrier layer of bacterial cellulose (BC) on a filter paper substrate. To optimize the pore structure of barrier layer, slow gel process of BC dispersion was conducted via acidification and solvent exchange. 1,2,3,4-butanetetracarboxylic acid was used to improve the wet strength and surface hydrophilicity through the crosslinking reaction between fibers. The underwater oil contact angles are higher than 150° in neutral environment, and slightly decrease under acid and alkali conditions. Combined with the micron-sized pore structure of BC barrier layer, the composite papers show good separation performance of oil-in-water emulsion. A denser BC layer can significantly improve the separation efficiency, but also lead to the reduction of flux. During the gelation of BC barrier layer, the increase in the ethanol/water ratio of the dispersion medium is able to increase the flux without obvious negative impact on the separation efficiency. When the ethanol/water ratio is 80%, the separation efficiency and water flux reach 99.2% and 1320 L m−2 h−1·bar−1 for the emulsified soybean oil with the average size of 13 μm, respectively. This type of all-cellulose composite papers provides a new idea for the fabrication of membrane materials for oil–water separation.

Currently, most of the collected waste medium-density fiberboards (MDF) is incinerated or landfilled, as economically viable recycling methods are yet to be developed. By steam refining waste medium-density fiberboards (MDF), it is possible to hydrolyze the incorporated resins and isolate a high yield fiber fraction. Further refining of the steam treated fibers might enable the fibers to be utilized in applications such as paper packaging, facilitating a cascading use of the waste material stream. To this end, intimate knowledge of the material is needed. In this study, the steam refined fibers of two waste MDF samples containing differing amounts of softwood and hardwood underwent refining and beating. The resulting fibers were characterized regarding their morphology and paper test sheets were produced to evaluate their strength (compression-, tensile- and tear-strength). Distinct differences in response to refining between the MDF samples were apparent. For the sample with the higher hardwood share an increase in strength properties with increasing steam treatment severities could be observed and it was possible to produce test sheets with comparable compression strength to recycled pulp for industrial corrugated paperboard. For the sample with a higher share of softwood, the steam treatment severity did not show any influence on fiber morphology or paper properties, and the resulting paper strength was low in comparison to the other steam refined waste MDF sample. Graphic Abstract