Search

WOS:000967659000009 The utilization of plant extraction products from Oeneanthe pimpinelloides (Apiaceae family) seeds were investigated in terms of their use as an insecticide control of packaging materials. The aim was to investigate their insecticidal effects against the flour beetle Tribolium castaneum. The Oeneanthe pimpinelloides seeds were extracted with methanol. By using the liquid-liquid extraction method, the hexane extract (II) was separated from the methanol extract (I) and hexane and methanol were evaporated. Then, the chemical composition of each sample was determined via gas chromatography–mass spectrometry. The methanol extract predominantly contained tetrahydrofuran, 1-methoxy-2-propanol, 1-methoxy, 2-butoxyethanol, 1-phenylethanone, cyclohexene carboxylate derivative, (3-phenyl-2-propynylidene) cyclopropane, diphenyldiazene, and dihydroxypropyl ester components, while the hexane fraction contained nonane, 1-octanol, decane, undecane, tridecane, alkyl benzene, benzene sulfonic acid, benzoxazine, and hexadecanoic acid components, as well as some derivatives of them. Each fraction was dissolved in DMSO for impregnation on filter paper. The insecticide effects of the paper samples were determined against Tribolium castneum. According to the results, the mortality started after 3 d for each fraction. After 4 d, the hexane fraction indicated total mortality in comparison with the methanol fraction, which showed partial mortality (3/5).

From the end of the nineteenth century and one hundred years onward, home sewing was an important part of many women’s duties, but it was also a pleasure, something that existed parallel with the emerging mass-produced ready-to-wear industry. The paper patterns used for home dressmaking were often sold and distributed through women’s magazines. These pattern sections were both a kind of reader service and a conscious strategy to capture the female target group. This article, based on an analysis of three Swedish magazines, is the first in-depth survey of patterns for home sewing of women’s clothes in Sweden. The study shows how the magazines adapted to changes in society with increasingly easier patterns and ready-cut fabric for their readers. By highlighting women making their clothes in the home, this article contributes to an often-neglected area of women’s memory and fashion history.

Foam-assisted web forming and chemical application technologies have great potential to improve manufacturing efficiency and product quality in the paper and nonwovens industries. In this study, the benefits of foam forming and foam-assisted application of chemicals were demonstrated in a pilot machine trial. Uniform high-bulk webs of unrefined bleached softwood kraft pulp (BSKP) and viscose fibers were manufactured by foam forming. It was shown that foam formed low-grammage and high-bulk viscose fiber webs can be strengthened by foam-assisted application of latex onto the wet web. Correspondingly, foam-assisted application of carboxymethyl cellulose (CMC) and anionic polyacrylamide (A-PAM) improved the strength of the foam formed low-grammage and high-bulk BSKP web. Overall, the pilot machine results indicated that material cost savings could be achieved and a high-performance product could be manufactured with foam-based technologies.

This study looked at how using small or large pieces of Rice Husk Ash and Waste Paper Sludge Ash can affect how strong and how much the concrete shrinks when it dries. When Rice Husk Ash (RHA) and Waste Paper Sludge Ash (WPSA) were added to concrete, more water was needed. However, the mechanical properties of the concrete were similar or better than the concrete made with just Ordinary Portland Cement (OPC). Finer RHA and WPSA gave the best improvements. Rice husk and waste paper ash made things shrink a lot because of tiny particles that cause it to happen. This research looked at using waste paper sludge ash instead of some of the cement in a kind of concrete called M20 mix. They tested different amounts of the ash (0%, 5%, 10%, 15%, 20%, and 25%) to see how strong it made the concrete. They tested the strength of the concrete up to 28 days after it was made and compared it to normal concrete. Waste paper sludge can be used as fuel because it has a lot of heat energy. Afterwards, the remaining ash can be used to replace some of the cement.

Purpose: The aim of this research work is to analyze and compare profitability performance of selected paper companies in India. Approach/Methodology/Design: An analytical study method is employed in this research work by relying on secondary data. In this research work 12 paper companies are selected as a sample based on their higher net sales and the study period are last10 financial years from 2012-13 to 2021-22. Ratio Analysis is used as an accounting tool in which six profitability ratios are employed. One-way ANOVA technique of parametric test is used as a statistical tool to identify the difference among sample means. Findings: The major finding of the research work indicates that in all the selected paper companies the profitability performance of shows fluctuating trend during the study period of 10 years. The overall performance was good and satisfactory in Satia Industries Ltd., JK paper Ltd., Seshasayee Paper and Board Ltd. and NR Agarwal Industries Ltd. and it was low and dissatisfactory in Orient Paper & Industries Ltd. and Astron Paper & Board Mill Ltd. for all the selected profitability ratio during the study period. The results of statistical test revealed that in gross profit ratio, operating profit ratio and return on assets ratio formulated null hypotheses are rejected and in net profit ratio, return on net worth ratio and return on capital employed ratio formulated null hypotheses are accepted. Originality/value: In this research work profitability analysis is carried out which is helpful to know the profitability performance of selected paper companies. The result would help investors to make right choice of investment in selected companies. It would also identify that how efficiently a business can generates profit and value for its shareholders from its sales or operations, shareholders' fund or balance sheet’s assets.

Currently, tissue product producers try to meet consumers’ requirements to retain their loyalty. In perforated products, such as toilet paper, these requirements involve the paper being portioned along the perforation line and not outside of it. Thus, it becomes necessary to enhance the behavior of the perforation line in perforated tissue papers. The current study aimed to verify if the perforation line for 0° (the solution found in commercial perforated products) is the best solution to maximize the perforation efficiency. A finite element (FE) simulation was used to validate the experimental data, where the deviations from the experiments were 5.2% for the case with a 4 mm perforation length and 8.8% for a perforation of 2 mm, and optimize the perforation efficiency using the genetic algorithm while considering two different cases. In the first case, the blank distance and the perforation line angle were varied, with the best configuration being achieved with a blank distance of 0.1 mm and an inclination angle of 0.56°. For the second case, the blank distance was fixed to 1.0 mm and the only variable to be optimized was the inclination angle of the perforation line. It was found that the best angle inclination was 0.67°. In both cases, it was verified that a slight inclination in the perforation line will favor partitioning and therefore the perforation efficiency.

In the research of the review of this creative and innovation area that can benefit community and nation. The review that had been picked in this research was the paper. The aim of this review is to explain about the advantages or the benefits of paper and also the used of the paper, also the improvement of the nation by the helps of the paper production and innovation. The methods that we going to describe in this review was the involvement of the paper production in many fields, such as for individuals, schools, medical centre and so on. There are a lot of information and new knowledges that we going to present and cite in this review. The conclusion of this article review was to be making sure that everyone knows the important and the properties of the paper in our country.

The aim of this white paper is to draw attention to the roles and responsibilities of higher education and research organisations in addressing gender-based violence. These roles and responsibilities may not be recognised or are downplayed, and this results in institutions failing to take appropriate action to ensure safe environments for students and staff. Secondly, the white paper aims to explicate the essential features and elements of effective policies and actions and lastly, to highlight the critical role of institutional leadership in making the policy frameworks and actions work. This white paper is primarily intended for: institutional leaders and top management; staff responsible for the design, adoption and implementation of institutional policies; staff appointed to support victims and survivors; and any other member of the academic community committed to ending gender-based violence. It builds on the results of the UniSAFE research, including the prevalence study (Lipinsky et al. 2022, Humbert et al. 2022), the institutional policy analysis (Huck et al. 2022), case studies (Ranea-Triviño et al. 2022), interviews (Blazyte and Pilinkaite 2022), and stakeholder and expert workshops (Yellow Window 2023a, 2023b), the purpose of which have been to gain insight into and test emerging policy solutions.

The object of research in this scientific paper is the treatment of waste generated by paper production in industrial landfills. In the part of the paper production process, i.e. in its subsystem for wastewater treatment, a significant amount of solid waste is generated, which ends up in industrial landfills. The reason for the impossibility of returning to the production process lies in the fact that the sludge contains larger amounts of moisture and present chemical components that are isolated in the paper production process or during wastewater treatment. In the experimental part of the paper, a “trial plot” was selected on which seedlings of the paulownia elongate plant were planted in the waste sludge. The process of plant growth was monitored for two years and bioremediation, i.e. transfer of elements from sediments to plants, was analysed by modern instrumental methods. Based on the results obtained by research, it can be said with certainty that Paulownia elongate can be used in bioremediation of areas where these sediments are deposited.

In an article to study the effect of sizing agent and filler on the structural features of paper from the cellulose mass of the inner layer of the bark of mulberry tree branches, mechanical strength, absorbency and sorption properties were studied. Tensile strength was determined on a tensile testing machine by the force causing the destruction of the sample. Surface absorbency at one side wetting was determined by the method of Cobb(30), by determining the mass of water absorbed by the surface of the paper when wetting one side of the test sample. Sorption properties were studied on a high-vacuum setup with mercury gates and McBain quartz balances according to water vapor sorption data. It was found that the internal 2% sizing of the paper pulp with cherry tree resin glue contributes to the strengthening of the paper structure, which is confirmed by the values of mechanical strength and surface absorbency when unilaterally wetted with water, relative to the values obtained when sizing with pine oleoresin rosin glue. When using glue from cherry resin, it is advisable to add 2 g of kaolin to 100 g of pulp from the inner layer of the bark of mulberry tree branches, since the increase negatively affects mechanical strength and hydrophobicity., В статье для исследования влияния проклеивающего вещества и наполнителя на структурные особенности бумаги из целлюлозной массы внутреннего слоя коры веток тутового дерева изучены механическая прочность, впитывающая способность и сорбционные свойства. Прочность на разрыв при растяжении определяли на разрывной машине по усилию, вызывающему разрушение образца. Поверхностную впитываемость при одностороннем смачивании определяли по методу Кобб(30), путем определения массы воды, поглощенной поверхностью бумаги при смачивании одной стороны испытуемого образца. Сорбционные свойства исследовали на высоковакуумной установке с ртутными затворами и кварцевыми весами Мак-Бена по данным сорбции паров воды. Выявлено, что внутренняя 2%-ная проклейка бумажной массы клеем из живицы черешневого дерева способствует упрочнению структуры бумаги, что подтверждается значениями механической прочности и поверхностной впитываемостью при одностороннем смачивании водой, относительно значений, полученных при проклейке канифольным клеем из сосновой живицы. При использовании клея из живицы черешневого дерева целесообразно к 100 г целлюлозной массы из внутреннего слоя коры веток тутового дерева добавлять каолин в количестве 2 г, так как увеличение отрицательно влияет на механическую прочность и гидрофобность.

Lead (Pb) pollution from local mines and industrial use increases risks for human, animal, and plant health. Pectin is an effective chelator of Pb, and it has been shown that a unicellular green alga, Penium margaritaceum, synthesizes pectin in the cell wall. In this study, the ability of P. margaritaceum to remove Pb from an aqueous solution was investigated. Energy dispersive X-ray spectroscopy revealed that two strains of P. margaritaceum accumulated Pb on the cell surface. Hence, P. margaritaceum cells were immobilized on cellulose filter paper. The immobilized algal cells were soaked in 1.0 mg/L Pb solution with gentle shaking for 8 h, and Pb in the solution and on the filter paper was measured by flame atomic absorption spectrometry. The immobilized algal cells continuously decreased the Pb concentration to less than 0.5 mg/L and recovered 31.8–32.7% of added Pb. The specific decrease in Pb and increase in Ca were observed in the presence of 1.0 mg/L each of Ca, Mg, Na, and K. Fourier transform infrared spectra suggested that the carboxylic acid group would be responsible for the adsorption of Pb. This study is the first to demonstrate the effectiveness of the immobilized P. margaritaceum cell in removing Pb from aqueous solutions with simple solid–liquid separation.

Four organic solid wastes (coffee grounds, ground nut shell, paper money sewage sludge and cork powder) have been investigated as bloating inducing agents in lightweight aggregate (LWA) manufacturing when mixed in small proportions (2.5 wt.%) with three types of clays. The pellets obtained were fired in a rotary kiln at the maximum feasible temperature for 4 min. A similar impact was observed both in the working conditions and in the properties of the LWAs, showing that the differences between said residues are not as decisive as those of the clays to which they are added. The organic wastes have played a crucial role in achieving reducing conditions inside the aggregate. Thus, their addition has led to substantial improvements both from an operational point of view, lowering the working temperature, and from a technological perspective, favoring bloating and the development of a highly porous and lightweight structure. Leachate studies have shown that the LWAs meet the regulatory limits. The outcomes of this investigation show that, in line with the precepts of the Circular Economy, the recovery of organic wastes of different nature can have a place in the production of environmentally friendly LWAs

Background: Intelligent food packaging that can monitor food quality and safety is essential in modern commercial trade. Research on the fabrication of environmentally friendly colorimetric labels that can indicate the freshness of food through color changes are needed. Methods: In this study, paper-based colorimetric labels were prepared using filter paper dipped into a solution of Roselle flower extract, and their performance in monitoring shrimp spoilage was investigated. Results: The labels’ response to ammonia vapor shows a distinct color variation from red to greenish-grey, corresponding to a sharp increase in the total color difference (ΔE = 32). The labels are relatively stable during storage at 4°C for up to 20 days. In shrimp freshness monitoring, the color changes from red to purple, which corresponds to increasing levels of total volatile basic nitrogen (TVB-N), and can be observed easily with the naked eye. Conclusion: This suggests that our paper-based colorimetric labels impregnated with Roselle extract show superior performance in detecting shrimp spoilage.

Today, legal regulations, along with social awareness, have made waste management a necessity. Depending on the type of waste, technological developments have enabled an increase in the number of approaches, e.g., reusing, recycling, and manufacturing of different products. In this study, low-density boards were produced using different proportions of office waste paper, wood chips, and chopped E-glass fiber. Waste paper and glass fiber formed the middle layer of the boards and wood chips comprised the surface layers. The density, water absorption, and thickness swelling properties of the boards were investigated. Among the mechanical properties, the modulus of rupture, modulus of elasticity, and internal bond strength were determined. The use of wastepaper led to a reduction in the modulus of rupture and modulus of elasticity of the boards. An increase in the glass fiber ratio contributed positively to the water absorption and thickness swelling properties, whereas it directly led to decreases in the internal bond strength, and the modulus of rupture and modulus of elasticity values. Nonetheless, the low-density boards were able to meet the minimum modulus of rupture and modulus of elasticity specified in ANSI 208.1 standards, while only one variation met the IB requirements., U današnje je vrijeme zakonska regulativa, uz društvenu svijest, gospodarenje otpadom učinila nužnošću. Ovisno o vrsti otpada, tehnološki je razvoj omogućio povećanje broja pristupa gospodarenju otpadom, npr. pri ponovnoj uporabi, recikliranju i proizvodnji različitih proizvoda. Za ovo su istraživanje izrađene ploče niske gustoće s različitim udjelima otpadnoga uredskog papira, drvnog iverja i usitnjenih staklenih vlakana. Pritom su otpadni papir i usitnjena staklena vlakna iskorišteni za izradu središnjeg sloja, a drvno je iverje upotrijebljeno za vanjske slojeve ploča. Izrađene su ploče ispitane i utvrđena je njihova gustoća, moć upijanja vode i debljinsko bubrenje. Dodatno su određeni modul loma, modul elastičnosti i čvrstoća raslojavanja. Rezultati ispitivanja pokazali su da je uporaba otpadnog papira pridonijela smanjenju vrijednosti modula loma i modula elastičnosti. Istodobno je povećanje udjela usitnjenih staklenih vlakana imalo pozitivan učinak na vrijednosti upijanja vode i na debljinsko bubrenje, ali je izravno utjecalo i na smanjenje čvrstoće raslojavanja, modula loma i modula elastičnosti. Ipak, izrađene ploče niske gustoće zadovoljile su minimalne zahtjeve norme ANSI 208.1 glede modula loma i modula elastičnosti, a samo je jedna skupina eksperimentalno izrađenih ploča zadovoljila uvjete čvrstoće raslojavanja.

Microfluidic paper-based analytical devices (μPADs) are emerging as powerful analytical platforms in clinical diagnostics, food safety, and environmental protection because of their low cost and favorable substrate properties for biosensing. However, the existing top-down fabrication methods of paper-based chips suffer from low resolution (200 μm). Additionally, papers have limitations in their physical properties (e.g., thickness, transmittance, and mechanical flexibility). Here, we demonstrate a bottom-up approach for the rapid fabrication of heterogeneously controlled paper-based chip arrays. We simply print a wax-patterned microchip with wettability contrasts, enabling automatic and selective assembly of cellulose microfibers to construct predefined paper-based microchip arrays with controllable thickness. This paper-based microchip printing technology is feasible for various substrate materials ranging from inorganic glass to organic polymers, providing a versatile platform for the full range of applications including transparent devices and flexible health monitoring. Our bottom-up printing technology using cellulose microfibers as the starting material provides a lateral resolution down to 42 ± 3 μm and achieves the narrowest channel barrier down to 33 ± 2 μm. As a proof-of-concept demonstration, a flexible paper-based glucose monitor is built for human health care, requiring only 0.3 μL of sample for testing.

This work was developed within the scope of project i3N (LA/P/0037/2020. I.P. N. F. Santos thanks i3N for the BPD Grant BPD/UI96/5177/2020. S. O. Pereira thanks i3N for the BPD Grant BPD/UI96/5808/2017. The authors also thank Jonas Deuermeier for the XPS measurements. Publisher Copyright: © 2022 Elsevier Ltd Laser-induced graphene from paper (paper-LIG) was applied in non-enzymatic electrochemical sensing of uric acid (UA) in human urine. Paper-LIG was formed by CO2 laser modification of paper into a 3D graphene arrangement. Kinetic analysis of paper-LIG electrodes returned effective heterogeneous electron transfer standard rate constants of 1.4 × 10−3 cm s−1 and 7.8 × 10−4 cm s−1 for [Ru(NH3)6]2+/3+ and [Fe(CN)6]4−/3− redox probes, respectively. These electrodes were able to detect and quantify uric acid in PBS within the 10–300 μM range at pH between 5.6 and 7.4. At pH 7.4, a linear response (R2 = 0.999) from 10 to 250 μM was achieved, with a limit of detection of 3.97 μM and a sensitivity of 0.363 μA cm−2 μM−1. Paper-LIG electrodes denoted adequate selectivity in synthetic urine as well as in ascorbic acid (AA) and dopamine (DA)-containing electrolytes. Determination of urinary UA content in human samples returned a concentration of c.a. 1.8–1.9 mM, within the range for healthy individuals. Recoveries of samples spiked with 50 and 100 μM UA were 100.6% and 95.4%, respectively, with satisfactory reproducibility and stability. These cheap, lightweight, flexible, and eco-friendly paper-LIG biosensors for non-enzymatic quantification of UA in human urine pave the way to widespread application in the detection of other important biomarkers. publishersversion published

Environmental toxic pollutants and pathogens that enter the ecosystem are major global issues. Detection of these toxic chemicals/pollutants and the diagnosis of a disease is a first step in efficiently controlling their contamination and spread, respectively. Various analytical techniques are available to detect and determine toxic chemicals/pathogens, including liquid chromatography, HPLC, mass spectroscopy, and enzyme-linked immunosorbent assays. However, these sensing strategies have some drawbacks such as tedious sample pretreatment and preparation, the requirement for skilled technicians, and dependence on large laboratory-based instruments. Alternatively, biosensors, especially paper-based sensors, could be used extensively and are a cost-effective alternative to conventional laboratory testing. They can improve accessibility to testing to identify chemicals and pollutants, especially in developing countries. Due to its low cost, abundance, easy disposal (by incineration, for example) and biocompatible nature, paper is considered a versatile material for the development of environmentally friendly electrochemical/optical (bio) sensor devices. This review presents an overview of sensing platforms constructed from paper, pointing out the main merits and demerits of paper-based sensing systems, their fabrication techniques, and the different optical/electrochemical detection techniques that they exploit.

Pseudoestrogene bisphenol A (BPA) can be important ingredient of thermochromic inks, increasingly used materials in thermal printing paper, security printing, advertising, design and as temperature indicators in medicine and food industry. BPA mass fraction in thermochromic inks can be up to several percent. Hence, disposal of items with thermochromic prints pose a risk of environmental pollution. In this work BPA mass fraction was monitored during anaerobic degradation of papers with thermochromic prints in soil in both matrices: papers and soil. The degradation conditions simulated deeper layers of waste at a landfill site. Six types of papers with prints of thermochromic ink containing 2% of BPA were subjected to anaerobic degradation over up to 150 days.

As a sustainable and greener substitute for conventional paper products, hemp paper has the potential to revolutionise the paper industry. Hemp paper, which is made from hemp plant fibres, is more environmentally friendly than conventional paper made from trees and is by nature strong and resilient. Hemp paper offers a special business opportunity in light of the rising demand for eco-friendly products around the world and growing awareness of the negative environmental effects of traditional paper production. This abstract examines the advantages of hemp paper, the market's current state, and the difficulties that must be overcome to turn hemp paper into a lucrative business venture. Hemp paper has the potential to revolutionise the market by using cutting-edge production methods, addressing consumer concerns, and raising market awareness.

Oil media on paper, such as oil paintings, sketches, prints, and books, occasionally present problems associated with the effect of oil medium on the paper support, raising a composite matter of condition assessment as it depends on several factors. The present work examines the effect of linseed oil on paper and, in particular, the changes caused by three types of linseed oil on the optical, morphological, mechanical, and chemical properties of pure cellulosic paper, employing mock-ups submitted to artificial ageing in controlled conditions of relative humidity and temperature in airtight vessels. The study involved colorimetry, opacity, tensile strength, pH measurements, SEM, FTIR, and VOC analysis with GC-MS. Processing of the results has so far indicated that thermal-humid ageing caused the gradual darkening of the oil-impregnated mock-ups, as well as alterations in opacity, intense fall of pH values, and severe reductions in tensile strength, while linseed oil processing during manufacture has a significant impact. FTIR spectra have indicated that chemical changes upon ageing are in accordance with those of optical and mechanical changes, while VOC emissions are mostly associated with the drying and degradation of the different types of linseed oil.

The current data on climate change and environmental degradation are dramatic. The consequences of these changes are already having a significant impact on people's health. Physicians - as advocates of the patients, but also as citizens - have an ethical obligation to be involved in efforts to stop these changes. The European Federation of Internal Medicine (EFIM) strongly encourages the Internal Medicine societies and internists across Europe to play an active role in matters related to climate change and environmental degradation. At a national level, this includes advocating the adoption of measures that reduce greenhouse gas (GHG) emissions and environmental degradation and contributing to policy decisions related to these issues. At a hospital level and in clinical practice, supporting actions by the health sector to reduce its ecological footprint is vital. At the level of EFIM and its associated internal societies, promoting educational activities and developing a toolkit to prepare internists to better care for citizens who suffer from the consequences of climate change. In addition to advocating and implementing effective actions to reduce the ecological footprint of the health industry, recommending the introduction of these themes in scientific programs of Internal Medicine meetings and congresses and the pre- and postgraduate medical training. At a personal level, internists must be active agents in advocating sustainable practices for the environment, increasing the awareness of the community about the health risks of climate change and environmental degradation, and being role models in the adoption of environmentally friendly behaviour.

Wastewater-based surveillance of the COVID-19 pandemic holds great promise; however, a point-of-use detection method for SARS-CoV-2 in wastewater is lacking. Here, a portable paper device based on CRISPR/Cas12a and reverse-transcription loop-mediated isothermal amplification (RT-LAMP) with excellent sensitivity and specificity was developed for SARS-CoV-2 detection in wastewater. Three primer sets of RT-LAMP and guide RNAs (gRNAs) that could lead Cas12a to recognize target genes via base pairing were used to perform the high-fidelity RT-LAMP to detect the N, E, and S genes of SARS-CoV-2. Due to the trans-cleavage activity of CRISPR/Cas12a after high-fidelity amplicon recognition, carboxyfluorescein-ssDNA-Black Hole Quencher-1 and carboxyfluorescein-ssDNA-biotin probes were adopted to realize different visualization pathways via a fluorescence or lateral flow analysis, respectively. The reactions were integrated into a paper device for simultaneously detecting the N, E, and S genes with limits of detection (LODs) of 25, 310, and 10 copies/mL, respectively. The device achieved a semiquantitative analysis from 0 to 310 copies/mL due to the different LODs of the three genes. Blind experiments demonstrated that the device was suitable for wastewater analysis with 97.7% sensitivity and 82% semiquantitative accuracy. This is the first semiquantitative endpoint detection of SARS-CoV-2 in wastewater via different LODs, demonstrating a promising point-of-use method for wastewater-based surveillance.

Flexible inkjet-printed antenna is presented. The proposed antenna is designed on a synthetic paper substrate with an area of 35 × 40 mm2 to provide frequency bands for many popular wireless applications. Simulation and measurement are used to study the performances, including the frequency bands, radiation patterns, peak gains and efficiency, of the antenna in two severely bending conditions with a curvature radius of 20 mm in the forward and backward directions. The antenna printed in photo papers material could not be fully flexible due to cracks introduced to the coating material on the surface of the photo paper. Hence, the resin coated material was only suitable for curved devices. The synthetic paper material used in this paper does not have a resin coating, therefore, the antenna does not lose its flexibility and can be bent in both the forward and backward directions without any cracks. Results show that bending in these two conditions has insignificant effects on the performances of the antenna. With a curvature radius of 20 mm in the forward direction, the measured peak gain and efficiency of the antenna are in the ranges from −3 to +2 dBi and 40% to 60%, respectively. The results together with the low cost make the antenna most suitable for many flexible 5G communications devices.

This article aims to examine students' understanding of concepts in learning mathematics with the help of Folding Paper, the study in this article focuses on three factors, namely: Results of interviews with teachers of understanding mathematical concepts, results of observations of understanding mathematical concepts and the results of applying the RME learning model to fractional material. The method in this research uses descriptive qualitative. Sources of data consist of interviews with teachers, observations and tests. For data analysis techniques using quantitative and descriptive qualitative data analysis. From the results of interviews, observations and tests that students' understanding of mathematical concepts is still relatively low., Artikel ini bertujuan untuk mengkaji pemahaman konsep siswa dalam pembelajaran matematika materi pecahan yang berbantu media Folding Paper, kajian dalam artikel ini fokus tiga faktor yaitu : Hasil wawancara dengan guru pemahaman konsep matematika, hasil observasi pemahaman konsep matematika dan hasil penerapan model pembelajaran RME pada materi pecahan. Metode dalam penelitian ini menggunakan deskriptif kualitatif. Sumber data terdiri dari wawancara dengan guru, observasi dan tes. Untuk teknik analisis data menggunakan data analisis kuantitatif dan deskriptif kualitatif. Dari hasil wawancara, observasi dan tes bahwa pemahaman konsep matematika siswa masih terbilang rendah.

Publisher Copyright: © 2022, The Author(s). Direct fire, indirect heat, and extinguishing water cause great damage to cultural assets upon a fire disaster in a library or archive. Conservation and restoration of heat-damaged papers are particularly challenging due to the complexity and severity of the damage. Since valuable originals obviously cannot be used for the development of treatment methods and only to a limited extent for the analysis of the damage, it is necessary to produce model paper materials that have a high degree of similarity to fire-damaged papers, which was addressed in the present study. Three different heating methods were tested to produce model papers of different heating levels. Their altered optical, structural, and chemical properties were analyzed and compared with the results of original fire-damaged samples. The study points out pathways to enable the production of comparable sample materials. Heating between hot plates or in an oven produces papers that have properties quite similar to the originals in terms of surface area, paper structure, cellulose integrity, and interactions with water. Stack heating in the oven has proven to be a particularly effective manufacturing method for larger quantities of model papers.

This work presents a unique approach to the design, fabrication, and characterization of paper-based origami robotic systems consisting of stackable pneumatic actuators. These paper-based actuators (PBAs) use materials with high elastic modulus-to-mass ratios, accordion-like structures, and direct coupling with pneumatic pressure for extension and bending. The study contributes to the scientific and engineering understanding of foldable components under applied pneumatic pressure by constructing stretchable and flexible structures with intrinsically nonstretchable materials. Experiments showed that a PBA possesses a power-to-mass ratio greater than 80 W/kg, which is more than four times that of human muscle. This work also illustrates the stackability and functionality of PBAs by two prototypes: a parallel manipulator and a legged locomotor. The manipulator consisting of an array of PBAs can bend in a specific direction with the corresponding actuator inflated. In addition, the stacked actuators in the manipulator can rotate in opposite directions to compensate for relative rotation at the ends of each actuator to work in parallel and manipulate the platform. The locomotor rotates the PBAs to apply and release contact between the feet and the ground. Furthermore, a numerical model developed in this work predicts the mechanical performance of these inflatable actuators as a function of dimensional specifications and folding patterns. Overall, we use stacked origami actuators to implement functionalities of manipulation, gripping, and locomotion as conventional robotic systems. Future origami robots made of paper-like materials may be suitable for single use in contaminated or unstructured environments or low-cost educational materials.

In the discipline of civil engineering, the foundation plays a crucial role in supporting and containing loads of complete structures. Therefore, a foundation needs to be strong enough to increase any structure's useful life. The soil has a direct impact on the structure's foundation. Vertisols soil is soil with unstable and weak soil that needs to be stabilized to make the soil suitable for construction purposes. The study is to determine the effectiveness of the pulverized used paper and sugarcane straw ash as stabilizers of vertisols soil in San Isidro, Nueva Ecija. Natural soil was classified as A-7-6 of AASTHO classification system and CH as group name classified by USCS classification system, indicates that the soil is high in clay. The index properties of the natural soil showed that it is poor and weak soil that is not applicable for engineering purposes. Liquid limit and plasticity index values of 60% and 35%, respectively, suggested that the soil is in high plasticity. There is a gradual decrease in the plasticity index to a value of 25% at 15% SCSA+PUP as compared to natural vertisols soil with 35%, this indicates that the soil is progressively stabilizing. In addition, there are increases in the compaction parameters and CBR value of 14.0283 kN/m3and 5.47 at 100% MDD compared to natural vertisols soil with values of 13.69476 kN/m3and 4.83 at 100% MDD, respectively. But these values fall from the requirement suggested of sub-base coarse, however, there are considerable changes in the vertisols soil using SCSA and PUP. This research aimed to determine the effectiveness of SCSA and PUP in stabilizing the vertisols soil

retracted paper

The use of natural nanocomponents for increasing the mechanical strength of paper in the aerodynamic method has been investigated. Milled bacterial cellulose and a fine fraction of sulphate bleached softwood cellulose formed during grinding (secondary fines) were used as nanocomponents. The treatment with nanocomponents was carried out while moistening the fibrous layer with the use of an anti-adhesive material providing uniform one sided application of substances in the form of a suspension on the paper surface. The growth of the indicators of the mechanical strength of paper occurred due to the formation of additional hydrogen bonds and an increase in the interfacial interaction between the fibrous layer of plant cellulose and the nanocomponent. It was found that the use of a suspension of bacterial cellulose is more promising due to the low consumption of the binder with a significant increase in the mechanical strength of the paper. The application of a bacterial cellulose coating layer on aerodynamically molded eucalyptus cellulose makes it possible to increase the mechanical strength of the paper to consumer requirements with the consumption of bacterial cellulose in an amount of 0.9% to 1.5% by weight of absolutely dry eucalyptus cellulose., Исследовано применение природных нанокомпонентов для повышения механической прочности бумаги при аэродинамическом способе формования. В качестве нанокомпонентов использовали измельченную бактериальную целлюлозу и мелкую фракцию сульфатной беленой хвойной целлюлозы, образующуюся в процессе размола (вторичную мелочь). Введение нанокомпонентов проводили при увлажнении волокнистого слоя с применением антиадгезионного материала, обеспечивающего равномерное одностороннее нанесение веществ в виде суспензии на поверхность бумаги. Рост показателей механической прочности бумаги происходил за счет образования дополнительных водородных связей и возрастания межфазного взаимодействия между волокнистым слоем из растительной целлюлозы и нанокомпонентами. Установлено, что использование суспензии бактериальной целлюлозы более перспективно из-за малого расхода при значительном повышении показателей механической прочности бумаги. Нанесение покровного слоя бактериальной целлюлозы на бумагу аэродинамического формования из сульфатной беленой эвкалиптовой целлюлозы позволяет повысить значение механической прочности бумаги до потребительских требований при расходе бактериальной целлюлозы в количестве от 0.9 до 1.5% к массе абсолютно сухой целлюлозы.

In this work, we present for the first time, a simplified fabrication of a laminated paper-based analytical device (LPAD) with a free-mobile app, Palette Cam, for image analysis. A filter paper is cut in a rectangular shape (9 × 3 cm) and placed between a top laminating sheet with punched holes and a bottom laminating sheet. The holes allow accessibility of liquid on the paper. Thermal lamination is then employed to complete the fabrication of LPAD. Our simplified design reduces a tedious alignment of small pieces of paper to the holes. We demonstrated the LPAD with an analysis of salicylic acid in pharmaceutical products. Each 4 μL of ferric reagent and sample was dispensed on the LPAD. Smartphone was used to capture images. The RGB (red green blue) color intensity from the Palette Cam was converted into a logarithm color ratio. Our LPAD is simplified, cost-effective and able to be a portable device.

Food safety is an issue that cannot be ignored at any time because of the great impact of food contaminants on people's daily life, social production, and the economy. Because of the extensive demand for high-quality food, it is necessary to develop rapid, reliable, and efficient devices for food contaminant detection. Microfluidic paper-based analytical devices (μPADs) have been applied in a variety of detection fields owing to the advantages of low-cost, ease of handling, and portability. This review systematically discusses the latest progress of μPADs, including the fundamentals of fabrication as well as applications in the detection of chemical and biological hazards in foods, hoping to provide suitable screening strategies for contaminants in foods and accelerating the technology transformation of μPADs from the lab into the field.

The use of paper as a sensing platform has great potential for point-of-care diagnostics in low-resource settings. However, there is a need for approaches that enable a higher level of control and customisation of the paper properties and reduce the cost of production and immobilisation of bioreagents onto paper. This thesis explores whether introducing digital printing into papermaking in combination with the recombinant protein production of paper-binding bioreagents could provide an accessible, scalable tool for the fabrication of affordable paper-based microfluidic biosensors with customised and varying paper properties. A novel printing method based on the localised vacuum-driven filtration of fibre suspensions (‘vacuum-driven printing’) was explored for the direct formation and patterning of engineered paper. An analytical model based on incompressible cake filtration theory was derived to predict the final thickness of the printed paper as a function of printing parameters and showed good agreement with the experimental data. This model enabled the rational design of complex 2D paper patterns with controlled and varying thickness profile that could be formed in a single printing process. The recombinant fusion of a cellulose-binding domain (CBD) into the protein reagent enabled its one-step immobilisation and purification onto paper fibres directly from the crude lysate, significantly reducing the cost and number of downstream processing steps required for the production of the bioreagent. The specific immobilisation provided by the CBD helped retain the protein’s diagnostic activity during air drying and long-term dry storage, even after four months at 20-37°C, when compared to direct physisorption of the protein reagent onto paper. The protein-bound fibres could be directly patterned with the vacuum-driven printing technique into the detection zone of a paper-based assay, forming bioactive paper. A proof-of-concept paper-based microfluidic biosensor was fabricated in a single vacuum-driven printing process, using unmodified paper fibres to form microfluidic channels of varying thickness, and protein-bound fibres to form bioactive paper at the detection zone of the assay. This research demonstrated a simplified, accessible, and lower-cost pathway to the production of paper-based biosensors with customised properties.

The International Conference on Cognitive Modeling brings together researchers from around the world whose main goal is to build computational systems that reflect the internal processes of the mind. In this issue, we present the five best representative papers on this work from our 19th meeting, ICCM 2021, which was held virtually from July 3 to July 9, 2021. Three of these papers provide new techniques for refining computational models, giving better methods for taking empirical data and producing accurate computational models of the cognitive systems that produce them. The other two papers focus on explanation: using models to elucidate the underlying processes affecting cognition in such diverse domains as logical reasoning and the effects of caffeine.

Businesses, which provide the production and mediation of goods and services needed by the society, are organizations that have goals such as growth, development, making profit, establishing a sustainable structure, and realizing social responsibility projects. It is important for businesses to have a financially strong structure in order to achieve their goals. In order to establish a sustainable financial structure, analyzes are carried out with various methods using the historical data of the enterprises and future decisions are taken with these analysis outputs. One of the financial sustainability measures for businesses is performance measurement. In many academic studies in the literature, it is observed that Multi-Criteria Decision Making (MCDM) methods are used for financial performance measurement. With MCDM methods, companies are compared financially within themselves, by years and with the sector. This study was carried out to measure the financial performance of businesses operating in the BIST Paper and Paper Products Printing Sector. As a sample, the data of 9 companies operating in the BIST Paper and Paper Products Printing Sector were used. The financial ratios of the enterprises for the years 2016-2021 were obtained and the analysis was carried out with COPRAS and MOORA, which are MCDM methods. Using two analysis methods provides the opportunity to evaluate financial performance rankings from different perspectives. As a result of the study, the financial performance rankings of 9 companies in the sector were evaluated according to both methods.

Paper is one of the most common wastes produced by humans, this paper waste is often found in household activities as well as offices and schools. Processing recycling of paper can add many advantages including being able to reduce waste in the environment, save energy, reduce the impact of global warming and can also generate income. This recycled paper can also be used to make various handicraft products that can be made by people who have creative values and an artistic spirit. The works of this recycled paper can be used as home decoration knick-knacks, stationery and office equipment, You can also make unique and creative multi-purpose containers that housewives can be interested in. Apart from that, they can be used for materials for student craft assignments as well as school students. Paper waste management certainly requires more attention, this can be overcome by efforts to reduce it by converting paper waste into recycled paper which has a selling value and is useful.

Microfibrillated cellulose (MFC) was prepared from post-consumer old corrugated container (OCC) material, which was first disintegrated in water, cleaned to remove impurities, and then fibrillated by grinding. Those processed MFCs were treated with in-situ formation of calcium carbonate by adding calcium oxide and injecting carbon dioxide into the mixture up to the ratio of 1:40 (MFC : calcium carbonate) by weight. The MFCs had a dark brown color initially but turned into high brightness materials similar to commercial ground calcium carbonate (GCC) after the in-situ formation process. The MFCs that had calcium carbonate attached on their surfaces, which were lengthy and flexible, were called flexible calcium carbonate from OCC (FCCO). Paper containing FCCO gave higher bulk, higher stiffness, and higher tensile index without lowering smoothness when compared to the paper containing commercial GCC. However, brightness was slightly lowered because of initial low brightness of the OCC. This study also demonstrated the feasibility to substitute wood fibers up to 5% with FCCO without lowering essential properties for printing paper. Benefits of the waste paper are savings of both wood resources and production cost.

Evidentiality refers to the speaker’s attitude towards the source of information and the reliability of the information conveyed and is one of the most important micro features of academic discourse. This study compared how Chinese and American researchers differed in the use of evidential verbs in their texts, the use of evidential verbs in 200 Chinese and American oil and gas experimental research papers is compared in this study using a combination of quantitative and qualitative methodologies based on a comparative corpus. It was found that both Chinese and American students were able to learn the evidential verbs of empirical research and use more appropriate language to describe the course of the experimental research and its results, but Chinese students used less verbs, particularly perceptual, cognitive, and verbal evidential verbs. Chinese scholars struggle to take ownership of discourse and tend to employ negative verbs less frequently and their essays use a more homogeneous vocabulary. These findings highlight some of the writing issues Chinese scholars encounter while writing papers in the English language; this paper analyzes these issues and offers suggestions for academic writing.

In this original paper, the development of a paper-based, sensitive, low-cost, quantitative and consistent biosensor system was demonstrated for the suitable “naked-eye” detection of phenolic compounds (specifical catechol). The Paper-based system depends on the enzymatic color-changing reaction that observed by using chromogenic agent of 4-AAP (4-aminoantipyrine) which has a specific color changing reaction in the presence of horseradish peroxidase (HRP) enzyme, phenol and H2O2. The visual result was associated with the catechol concentration by using image processing software to evaluate the quantitative detection. The developed biosensor system demonstrated a linear detection range from catechol between 2,5 µM to 100 µM with 2.6% to 9.3 % of sd results. The detection limit was also calculated as 2,25 µM. Specificity, selectivity, stability and direct real sample analysis demonstrated the potential applicability of the developed paper-based biosensor system for catechol detection in food samples with minimal investment and an easy-to-use method.