Search

Purpose This study aimed to determine whether continual electronic patient-reported outcome (ePRO) measurements at home can capture the fluctuations in health-related quality of life (HRQOL) scores between visits. Methods We performed a randomized controlled trial to compare the scores obtained by standard practice (paper-based measurements in the hospital) to scores by continuous measurement of ePRO at home. Metastatic cancer patients were randomly assigned to either the paper-based ( n = 50) or the ePRO group ( n = 52). EQ-5D-5L and EORTC QLQ C-30 scores were obtained on 3 different chemotherapy days in the paper-based group. Meanwhile, scores were obtained on the chemotherapy day and on days 3, 7, 10, and 14 in the ePRO group during 2 cycles. The first hypothesis of our study was that both scores at the same time points would be equivalent despite different measurement frequency, place, or mode of measurement. The second hypothesis was that PRO score–adjusted time would be different between the groups. For equivalence, the endpoint was the mean EQ-5D-5L index value on the chemotherapy day before the outpatient treatment. Only if equivalence was shown, quality-adjusted life-days (QALDs) were considered using all the data. Results The adjusted mean difference in the EQ-5D-5L index was determined to be −0.013 (95% confidence interval [CI]: −0.049 to 0.022); the 95% CI did not exceed the equivalence margin. Similarly, the mean difference in global health status (2.28 [95% CI: −2.55 to 7.11]) also showed equivalence. However, the QALD by EQ-5D-5L was significantly lower in the ePRO group by 1.36 per 30 d (95% CI: −2.22 to −0.51; P = 0.0021). Conclusions Continual measurements of the HRQOL at home by ePRO may yield more detailed profiles of the HRQOL.

Paper cultural relics such as double-sided printed newspapers and periodicals represent modern cultural heritage. Severe damage such as embrittlement, decay, and dreg generally occur to paper; hence, it urgently needs conservation and restoration. Therefore, herein, a new reinforcement method for the fragile double-sided printed paper cultural relics is proposed with cotton mesh and adhesive PVA217 as reinforcement materials. Using a computer measured and controlled folding endurance tester, a pendulum tensile strength tester, pH meter, pulp viscosimeter, and other instruments, the physical properties of newspaper samples before and after aging were evaluated. In addition, the mechanical properties, chromatic aberration and surface morphology of simulated samples before and after the cotton mesh reinforcement and Japanese washi paper reinforcement were assessed. The experimental results indicate that this new reinforcement method could effectively improve the physical strength, chromatic aberration and durability of the simulated samples. Widespread applications of this cotton mesh reinforcement method for the reinforcement and protection of the red revolutionary cultural relics such as double-sided printed newspaper and periodicals during the Republic of China era are foreseeable.

The rapid economic growth and environmental concerns have led to high demands on paper and paper-based products in terms of variety, quantity, quality, and specialty. Enhancement and functionalization with additives are constantly required. Moving away from traditional petroleum-based additives, researchers have attempted to use “green” nanoadditives by introducing renewable environmentally friendly nanocellulose. This article studies the functions of nanocellulose as bio-additives (enhancer, retention and filtration reagent, and coating aid) in paper and paper products, and overviews the research development of nanocellulose-based additives and their applications in the paper industry for both efficient production and paper functionalization. The review shows that (1) a variety of nanocellulose-based bioadditives have been reported for various applications in paper and paper-based products, while commercially viable developments are to be advanced; (2) nanocellulose was mostly formulated with other polymer and particles as additives to achieve their synergistic effects; (3) major interests have concentrated on the nanocellulose in the specialty papers as representing more value added products and in the efficient utilization of recycled fibers, which remains most attractive and promising for future development. This report shall provide most useful database information for researchers and industries for paper recycling and enhancement, and paper-based products innovation and application.

Aβ42 is one of the most extensively studied blood and Cerebrospinal fluid (CSF) biomarkers for the diagnosis of symptomatic and prodromal Alzheimer’s disease (AD). Because of the heterogeneity and transient nature of Aβ42 oligomers (Aβ42Os), the development of technologies for dynamically detecting changes in the blood or CSF levels of Aβ42 monomers (Aβ42Ms) and Aβ42Os is essential for the accurate diagnosis of AD. The currently commonly used Aβ42 ELISA test kits usually mis-detected the elevated Aβ42Os, leading to incomplete analysis and underestimation of soluble Aβ42, resulting in a comprised performance in AD diagnosis. Herein, we developed a dual-target lateral flow immunoassay (dLFI) using anti-Aβ42 monoclonal antibodies 1F12 and 2C6 for the rapid and point-of-care detection of Aβ42Ms and Aβ42Os in blood samples within 30 min for AD diagnosis. By naked eye observation, the visual detection limit of Aβ42Ms or/and Aβ42Os in dLFI was 154 pg/mL. The test results for dLFI were similar to those observed in the enzyme-linked immunosorbent assay (ELISA). Therefore, this paper-based dLFI provides a practical and rapid method for the on-site detection of two biomarkers in blood or CSF samples without the need for additional expertise or equipment. Graphical Abstract

Objective The aims of the study were: (1) to clarify the definitions of “migrant” used in occupational health research; (2) to summarize migrant workers’ industry sectors, occupations and employment conditions; (3) to identify the occupational health and safety services available to migrant workers; (4) to summarize work-related health problems found among migrant workers; (5) to identify the methodological challenges to research into occupational health of migrant workers; and (6) to recommend improvements in migrant occupational health research. Methods This position paper was prepared by researchers from several European countries and Australia, working within the EU COST Action OMEGA-NET. The paper drew on two recent systematic reviews on the occupational health of international migrant workers and other literature, and also identified uncertainties and gaps in the research literature. Migrants may, for example, be temporary or permanent, moving for specific jobs migrants or other reasons. Their ethnicity and language capabilities will affect their work opportunities. Results The occupational health literature seldom adequately identifies the heterogeneity or characteristics of the migrant group being studied. Migrants tend to work in more physically and mentally demanding environments with higher exposures than native workers. Migrants tend to have an increased risk of physical and mental ill health, but less access to health care services. This has been demonstrated recently by high rates of COVID-19 and less access to health care. There have been a number of cross-sectional studies of migrant health but few long-term cohort studies were identified. Other study designs, such as registry-based studies, surveys and qualitative studies may complement cross-sectional studies. Mixed-methodology studies would be valuable in research on migrants’ occupational health. Language and lack of trust are barriers to migrant research participation. Conclusion Targeted research, especially longitudinal, identifying how these economically important but often-vulnerable workers can be best assisted is needed. Researchers should identify the characteristics of the migrant workers that they are studying including visa/migration circumstances (temporary, permanent, undocumented), racial and ethnic characteristics, existing skills and language abilities.

In the present approach, a Cr2O3-TiO2-modified, portable, and biomimetic nanosensor was designed to meet the requirement of a robust and colorimetric sensing of hydrogen peroxide. Cr2O3-TiO2 nanocomposites prepared via the hydrothermal method were fabricated as a transducer surface on the filter paper using the sol-gel matrix. The color on the filter paper sensor changed from green to blue upon the addition of hydrogen peroxide in the presence of TMB. This change in the color intensity was linear with the concentration of H2O2. RGB software was used as a color analyzing model to evaluate the optical signals. This paper-based colorimetric platform provided us with an improved analytical figure of merit with a linear range of 0.005-100 μM with 0.003 μM limit of detection. The real sample analysis and excellent anti-interference potential results proved the good analytical performance of the proposed design, providing a more promising tool for colorimetric H2O2 detection. Introducing Cr2O3-TiO2 nanocomposite-based paper sensors, being a novel method for optical and colorimetric detection, can pave the way for the development of other sensing devices for the detection of different analytes.

Surface characteristics of printing substrates are of the utmost importance to all types of paper that interact with ink. During all types of printing processes, the behaviour of the liquid phase (ink or dye) on the paper is directly defined by the paper cellulose-based surface. The printed ink spreads and penetrates more into paper fibres when the paper surface is rougher and more permeable. Contact angle measurements by sessile drop method are considered the most appropriate for determining the paper sheet surface energy. Paper as hydrophilic material has a high absorption rate resulting in a low contact angle. The objective of this study was to evaluate the surface free energy of laboratory-made papers containing straw pulp obtained from residues after the harvest of the most cultivated cereals in Croatia (wheat, barley and triticale). The obtained surface free energy results are promising for straw pulp usage in the manufacture of printing paper.

Urinary tract infections (UTIs) make up a significant proportion of the global burden of disease in vulnerable groups and tend to substantially impair the quality of life of those affected, making timely detection of UTIs a priority for public health. However, economic and societal barriers drastically reduce accessibility of traditional lab-based testing methods for critical patient groups in low-resource areas, negatively affecting their overall healthcare outcomes. As a result, cellulose-based materials such as paper and thread have garnered significant interest among researchers as substrates for so-called frugal analytical devices which leverage the material’s portability and adaptability for facile and reproducible diagnoses of UTIs. Although the field may be only in its infancy, strategies aimed at commercial penetration can appreciably increase access to more healthcare options for at-risk people. In this review, we catalogue recent advances in devices that use cellulose-based materials as the primary housing or medium for UTI detection and chart out trends in the field. We also explore different modalities employed for detection, with particular emphasis on their ability to be ported onto discreet casings such as sanitary products. Graphical abstract

Patients with the dual burden of chronic kidney disease (CKD) and cardiovascular disease (CVD) experience unacceptably high rates of morbidity and mortality, which also entail unfavorable effects on healthcare systems. Currently, concerted efforts to identify, prevent and treat CVD in CKD patients are lacking at the institutional level, with emphasis still being placed on individual specialty views on this topic. The authors of this position paper endorse the need for a dedicated interdisciplinary team of subspecialists in cardio-nephrology that manages appropriate clinical interventions across the inpatient and outpatient settings. There is a critical need for training programs, guidelines and best clinical practice models, and research funding from nephrology, cardiology and other professional societies, to support the development of the subspecialty of cardio-nephrology. This position paper from the coordinating committee from the Working Group for Cardiorenal Medicine of the Spanish Society of Nephrology (S.E.N.) is intended to be the starting point to develop the subspecialty of cardio-nephrology within the S.E.N.. The implementation of the subspecialty in day-to-day nephrological practice will help to diagnose, treat, and prevent CVD in CKD patients in a precise, clinically effective, and health cost-favorable manner. Resumen: Los pacientes con enfermedad renal crónica (ERC) que presentan enfermedad cardiovascular (ECV) tienen índices de morbilidad y mortalidad inaceptablemente elevados, que impactan desfavorablemente sobre los sistemas de salud. En la actualidad, se requieren actuaciones multidisciplinares para identificar, prevenir y tratar la ECV en los pacientes con ERC, debiendo pues superarse la época de las actuaciones de las especialidades individuales. Los autores de este artículo respaldan la necesidad de un equipo interdisciplinar de subespecialistas en cardionefrología que gestione las intervenciones clínicas adecuadas en el entorno hospitalario y en el ambulatorio. Existe una gran necesidad de programas de formación, de guías y modelos de práctica clínica, y de fondos para la investigación en las sociedades de nefrología, cardiología y otras, para apoyar el desarrollo de la subespecialidad de cardio-nefrología. Este documento de opinión del comité coordinador del Grupo de Trabajo de Medicina Cardiorenal de la Sociedad Española de Nefrología (S.E.N.) pretende ser el inicio del desarrollo de la subespecialidad de Cardionefrología en el marco de la S.E.N. La implementación de la subespecialidad en la práctica nefrológica diaria contribuirá a diagnosticar, tratar y prevenir la ECV en los pacientes con ERC de una manera precisa, clínicamente efectiva y sanitariamente rentable.

Fraudulent papers from paper mills are a serious threat to the entire scientific community. Naunyn-Schmiedeberg’s Archives of Pharmacology has become the target of a massive attack of fraudulent papers originating from paper mills. This editorial highlights 20 important features we observed with paper mills and explains how the journal is responding to this serious threat to restore the integrity of science. Hopefully, this editorial is also helpful for editors of other scientific journals.

A wide variety of biomass is available all around the world. Most of the biomass exists as a by-product from manufacturing industries. Pulp and paper mills contribute to a higher amount of these biomasses mostly discarded in the landfills creating an environmental burden. Biomasses from other sources have been used to produce different kinds and grades of biomaterials such as those used in industrial and medical applications. The present review aims to investigate the availability of biomass from pulp and paper mills and show sustainable routes for the production of high value-added biomaterials. The study reveals that using conventional and integrated biorefinery technology the ample variety and quantity of waste generated from pulp and paper mills can be converted into wealth. As per the findings of the current review, it is shown that high-performance carbon fiber and bioplastic can be manufactured from black liquor of pulping waste; the cellulosic waste from sawdust and sludge can be utilized for the synthesis of CNC and regenerated fibers such as viscose rayon and acetate; the mineral-based pulping wastes and fly ash can be used for manufacturing of different kinds of biocomposites. The different biomaterials obtained from the pulp and paper mill biomass can be used for versatile applications including conventional, high performance, and smart materials. Through customization and optimization of the conversion techniques and product manufacturing schemes, a variety of engineering materials can be obtained from pulp and paper mill wastes realizing the current global waste to wealth developmental approach.

In the present study, adsorption of colour and other pollutants from agro-based paper mill effluent onto fabricated coal fly ash nanoparticles (CFA-N) have been investigated. Response surface methodology was applied to evaluate the operational conditions for maximum ouster of colour from effluent by nano structured CFA-N. Maximum reduction in colour (92.45%) and other pollutants were obtained at optimum conditions: 60 min interaction time, 60 g/L adsorbent dosage and 80 rpm agitation rate. The regression coefficient values (adjusted R2 = 0.7169; predicted R2 = 0.7539) established harmony between predicted and the experimental data. The adsorption equilibrium results matched perfectly with both Langmuir and Freundlich isotherms with maximum adsorption capacity of 250 platinum–cobalt/g. Additionally, the efficacy of CFA-N was also assessed in a continuous column mode. Furthermore, the feasibility of treated effluent for irrigation purpose was checked by growing the plant Solanum lycopersicum. Overall, the findings demonstrated the outstanding role of inexpensive and abundantly available CFA-N in treatment of paper mill effluent to the required compliance levels. HIGHLIGHTS Nano fly ash was successfully utilized for removal of colour and other pollutants from agro-based paper mill effluent.; RSM using BBD was used to optimize the operational conditions.; Quadratic models have been established for the response variables.; Fixed-bed column adsorption studies illustrated the feasibility of nano fly ash for pilot-scale applications.; The reusability of treated effluent for irrigation was examined.

COVID 19 struck us all like a bolt of lightning and for the past 10 months, it has tested our resilience, agility, creativity, and adaptability in all aspects of our lives and work. Simulation centers and simulation-based educational programs have not been spared. Rather than wait for the pandemic to be over before commencing operations and training, we have been actively looking at programs, reviewing alternative methods such as e-learning, use of virtual learning platforms, decentralization of training using in situ simulation (ISS) modeling, partnerships with relevant clinical departments, cross-training of staff to attain useful secondary skills, and many other alternatives and substitutes. It has been an eye-opening journey as we maximize our staff's talent and potential in new adoptions and stretching our goals beyond what we deemed was possible. This paper shares perspectives from simulation centers; The SingHealth Duke NUS Institute of Medical Simulation which is integrated with an Academic Medical Center in Singapore, The Robert and Dorothy Rector Clinical Skills and Simulation Center, which is integrated with Thomas Jefferson University, Oakhill Emergency Department, Florida State University Emergency Medicine Program, Florida, USA and The Wellington Regional Simulation and skills center. It describes the experiences from the time when COVID 19 first struck countries around the world to the current state whereby the simulation centers have stWWarting functioning in their “new norm.” These centers were representative examples of those in countries which had extremely heavy (USA), moderate (Singapore) as well as light (New Zealand) load of COVID 19 cases in the nation. Whichever categories these centers were in, they all faced disruption and had to make the necessary adjustments, aligning with national policies and advisories. As there is no existing tried and tested model for the running of a simulation center during an infectious disease pandemic, this can serve as a landmark reference paper, as we continue to fine-tune and prepare for the next new, emerging infectious disease or crisis.

BackgroundThe analysis of the quality of food is important to protect humans from food-borne or food-based illnesses caused by pathogens, such as bacteria, fungi, viruses, and protozoa. Rapid identification of these pathogens is critical to ensure food safety. Various detection and identification strategies exist; however, they are laborious and time consuming and hence the detection takes longer time. The aim of this study was to develop the specific and fast method for the detection of contaminants in milk.ResultsIn this study, we have developed a simple paper-based PCR method with minimum sample preparation process. The 16S rDNA universal primers were used for the detection of bacterial contaminants. LacZ primers were used for coliform detection which causes serious illness and hence their detection is crucial. ITS region primers were used for fungal detection. The most unique thing about this study is use of Whatman paper no. 1 as sample carrier material. We developed and validated the paper-based PCR method and used it for the detection of microbes and coliforms using milk as a representative sample.ConclusionWe evaluated this method for its suitability in the detection of contaminant microbes using different milk samples. The paper-based method could successfully detect contaminants in the milk samples and the results were comparable to the traditional microbial detection method. The traditional microbiological method takes at least 18–20 h for detecting the presence of microbes in any sample but the developed paper-based PCR method can confirm the microbial presence in 2–3 h. This is very promising especially in the testing where sample sterility is crucial.

First two decades of the twenty-first century are characterised by epidemics of non-communicable diseases such as many hundreds of millions of patients diagnosed with cardiovascular diseases and the type 2 diabetes mellitus, breast, lung, liver and prostate malignancies, neurological, sleep, mood and eye disorders, amongst others. Consequent socio-economic burden is tremendous. Unprecedented decrease in age of maladaptive individuals has been reported. The absolute majority of expanding non-communicable disorders carry a chronic character, over a couple of years progressing from reversible suboptimal health conditions to irreversible severe pathologies and cascading collateral complications. The time-frame between onset of SHS and clinical manifestation of associated disorders is the operational area for an application of reliable risk assessment tools and predictive diagnostics followed by the cost-effective targeted prevention and treatments tailored to the person.This article demonstrates advanced strategies in bio/medical sciences and healthcare focused on suboptimal health conditions in the frame-work of Predictive, Preventive and Personalised Medicine (3PM/PPPM). Potential benefits in healthcare systems and for society at large include but are not restricted to an improved life-quality of major populations and socio-economical groups, advanced professionalism of healthcare-givers and sustainable healthcare economy. Amongst others, following medical areas are proposed to strongly benefit from PPPM strategies applied to the identification and treatment of suboptimal health conditions:Stress overload associated pathologiesMale and female healthPlanned pregnanciesPeriodontal healthEye disordersInflammatory disorders, wound healing and pain management with associated complicationsMetabolic disorders and suboptimal body weightCardiovascular pathologiesCancersStroke, particularly of unknown aetiology and in young individualsSleep medicineSports medicineImproved individual outcomes under pandemic conditions such as COVID-19.

Highlights • Standard procedures and appropriate assessment of exercise are proposed for the commonly used animal models related to chronic exercise (e.g., treadmill running, voluntary wheel running, swimming exercise, and resistance exercise) in cardiovascular research. • Optimal design of animal exercise studies in cardiovascular research should consider the choice of exercise models, control of exercise protocols, exercise at different stages of disease, and other factors, such as age, sex, and genetic background. • An optimal design for studying exercise-induced physiological cardiac growth and its related beneficial effects against cardiovascular diseases is presented., Growing evidence has demonstrated exercise as an effective way to promote cardiovascular health and protect against cardiovascular diseases However, the underlying mechanisms of the beneficial effects of exercise have yet to be elucidated. Animal exercise studies are widely used to investigate the key mechanisms of exercise-induced cardiovascular protection. However, standardized procedures and well-established evaluation indicators for animal exercise models are needed to guide researchers in carrying out effective, high-quality animal studies using exercise to prevent and treat cardiovascular diseases. In our review, we present the commonly used animal exercise models in cardiovascular research and propose a set of standard procedures for exercise training, emphasizing the appropriate measurements and analysis in these chronic exercise models. We also provide recommendations for optimal design of animal exercise studies in cardiovascular research, including the choice of exercise models, control of exercise protocols, exercise at different stages of disease, and other considerations, such as age, sex, and genetic background. We hope that this position paper will promote basic research on exercise-induced cardiovascular protection and pave the way for successful translation of exercise studies from bench to bedside in the prevention and treatment of cardiovascular diseases., Graphical abstract Image, graphical abstract

European pharmaceutical companies have a legal requirement to provide non-promotional Medical Information (MI) services to support healthcare professionals (HCPs) who are using their medicinal products. While the industry has self-regulating bodies with established Codes of Practice, these mainly focus on promotional messaging and commercial activities. In the absence of similar frameworks for MI, such services struggle to understand how to meet HCP digital expectations, often in fear of breaching the promotional codes. This is limiting access to the wealth of non-promotional patient-focussed information held within the industry. Meanwhile, a large volume of unregulated, low-quality information can be readily found on the internet. To understand the current status, the Medical Information Leaders in Europe (MILE) industry association performed a benchmarking survey which explored the online MI service provision of 13 mid-large pharmaceutical companies across Europe. This highlighted a great diversity in approach in terms of geographical coverage and content. Visibility and access for HCPs is complex, compromising online engagement and website utilisation. This MILE position paper highlights the critical need to establish a clear governance model, which empowers pharmaceutical company MI functions to provide unbranded, non-promotional, medicinal product information sources to support HCP online information needs. It is essential to build confidence, transparency and trust by establishing a practical quality framework with principles and standards for online MI services for HCPs.

Purpose To develop a European White Paper document on oropharyngeal dysphagia (OD) in head and neck cancer (HNC). There are wide variations in the management of OD associated with HNC across Europe. Methods Experts in the management of specific aspects of OD in HNC across Europe were delegated by their professional medical and multidisciplinary societies to contribute to this document. Evidence is based on systematic reviews, consensus-based position statements, and expert opinion. Results Twenty-four sections on HNC-specific OD topics. Conclusion This European White Paper summarizes current best practice on management of OD in HNC, providing recommendations to support patients and health professionals. The body of literature and its level of evidence on diagnostics and treatment for OD in HNC remain poor. This is in the context of an expected increase in the prevalence of OD due to HNC in the near future. Contributing factors to increased prevalence include aging of our European population (including HNC patients) and an increase in human papillomavirus (HPV) related cancer, despite the introduction of HPV vaccination in various countries. We recommend timely implementation of OD screening in HNC patients while emphasizing the need for robust scientific research on the treatment of OD in HNC. Meanwhile, its management remains a challenge for European professional associations and policymakers.

Teaching about biodiversity and its conservation could be an effective way to teach the importance of different species and human dependence on ecological support systems. This study compares the effectiveness of a digital and a paper-based dichotomous identification key for teaching pre-service teachers about plantspecies diversity. Twenty-four Slovenian teachers in pre-service training used a digital version of the key on tablet computers and twenty-nine used a paper-based version to identify woody species in the garden near their university faculty. Both keys contained the same species, identical photographs and the same sequence of steps to identify the species. The accuracy and time taken to identify the five species were measured. The participants also completed a questionnaire about the usability of the identification key. Overall, both versions of the key were equally good for determining species names. The digital version of the key was found to be more time-effective than the paper version only when multiple identification steps were required to identify species. The results confirm that those who scored better on the identification tasks have a better general opinion about the usability of the key especially students using digital version of the key. Implications for teachers using or creating identification keys are discussed in the conclusion.

In this paper, we present a system for automatic evaluation of the quality of a question paper. Question paper plays a major role in educational assessment. The quality of a question paper is crucial to fulfilling the purpose of the assessment. In many education sectors, question papers are prepared manually. A prior analysis of a question paper might help in finding the errors in the question paper, and better achieving the goals of the assessment. In this experiment, we focus on higher education in the technical domain. First, we conducted a student survey to identify the key factors that affect the quality of a question paper. The top factors we identified are question relevance, question difficulty, and time requirement. We explored the strategies to handle these factors and implemented them. We employ various concepts and techniques for the implementation. The system finally assigns a numerical quality score against these factors. The system is evaluated using a set of question papers collected from various sources. The experimental results show that the proposed system is quite promising.

Background Since the COVID-19 pandemic has occurred, nations showed their unpreparedness to deal with a mass casualty incident of this proportion and severity, which resulted in a tremendous number of deaths even among healthcare workers. The World Society of Emergency Surgery conceived this position paper with the purpose of providing evidence-based recommendations for the management of emergency surgical patients under COVID-19 pandemic for the safety of the patient and healthcare workers. Method A systematic review was conducted in accordance with the Preferred Reporting Items for Systematic Review and Meta-analysis Protocols (PRISMA-P) through the MEDLINE (PubMed), Embase and SCOPUS databases. Synthesis of evidence, statements and recommendations were developed in accordance with the GRADE methodology. Results Given the limitation of the evidence, the current document represents an effort to join selected high-quality articles and experts’ opinion. Conclusions The aim of this position paper is to provide an exhaustive guidelines to perform emergency surgery in a safe and protected environment for surgical patients and for healthcare workers under COVID-19 and to offer the best management of COVID-19 patients needing for an emergency surgical treatment. We recommend screening for COVID-19 infection at the emergency department all acute surgical patients who are waiting for hospital admission and urgent surgery. The screening work-up provides a RT-PCR nasopharyngeal swab test and a baseline (non-contrast) chest CT or a chest X-ray or a lungs US, depending on skills and availability. If the COVID-19 screening is not completed we recommend keeping the patient in isolation until RT-PCR swab test result is not available, and to manage him/she such as an overt COVID patient. The management of COVID-19 surgical patients is multidisciplinary. If an immediate surgical procedure is mandatory, whether laparoscopic or via open approach, we recommend doing every effort to protect the operating room staff for the safety of the patient.

Renewable paper reusing plays a significant role in the sustainable environment under the background of the shortage in forest resources and the pollution from the paper industry. The conventional reusing stream of waste office paper appears to have low reusing rates while consuming massive amounts of energy in intermediate steps. In this study, we developed a novel portable renewable desktop paper reusing system based on font area detection and greyscale sensor. The proposed system consists of two main parts, namely, a greyscale sensor and font area detection model and a polishing mechanism. Acting as an ink mark detector for waste desktop paper, the greyscale sensor and font area detection model can detect the font in the waste desktop paper using an adaptive dynamic compensation schematic. The polishing mechanism will grind the font area of the wasted desktop paper, and this paper reusing processing is non-chemical, energy saving and environmentally friendly. The proposed system is demonstrated through simulations and experimental results, which show that the proposed renewable desktop paper reusing system is portable and is effective for reusing waste office paper in the office. An accuracy of 99.78% is demonstrated in the greyscale sensor and font area detection model, and the average reuse rate of one piece of paper is 2.52 times, verifying that the proposed portable system is effective and practical in renewable desktop paper reusing applications.

Approximately 10 years have passed since the Peritoneal Dialysis Guidelines were formulated in 2009. Much evidence has been reported during the succeeding years, which were not taken into consideration in the previous guidelines, e.g., the next peritoneal dialysis PD trial of encapsulating peritoneal sclerosis (EPS) in Japan, the significance of angiotensin-converting enzyme inhibitors (ACEIs) and angiotensin receptor blockers (ARBs), the effects of icodextrin solution, new developments in peritoneal pathology, and a new international recommendation on a proposal for exit-site management. It is essential to incorporate these new developments into the new clinical practice guidelines. Meanwhile, the process of creating such guidelines has changed dramatically worldwide and differs from the process of creating what were “clinical practice guides.” For this revision, we not only conducted systematic reviews using global standard methods but also decided to adopt a two-part structure to create a reference tool, which could be used widely by the society’s members attending a variety of patients. Through a working group consensus, it was decided that Part 1 would present conventional descriptions and Part 2 would pose clinical questions (CQs) in a systematic review format. Thus, Part 1 vastly covers PD that would satisfy the requirements of the members of the Japanese Society for Dialysis Therapy (JSDT). This article is the duplicated publication from the Japanese version of the guidelines and has been reproduced with permission from the JSDT.

Multiple sclerosis is a complex, autoimmune-mediated disease of the central nervous system characterized by inflammatory demyelination and axonal/neuronal damage. The approval of various disease-modifying therapies and our increased understanding of disease mechanisms and evolution in recent years have significantly changed the prognosis and course of the disease. This update of the Multiple Sclerosis Therapy Consensus Group treatment recommendation focuses on the most important recommendations for disease-modifying therapies of multiple sclerosis in 2021. Our recommendations are based on current scientific evidence and apply to those medications approved in wide parts of Europe, particularly German-speaking countries (Germany, Austria, Switzerland).Die Multiple Sklerose ist eine komplexe, autoimmun vermittelte Erkrankung des zentralen Nervensystems, charakterisiert durch inflammatorische Demyelinisierung sowie axonalen/neuronalen Schaden. Die Zulassung verschiedener verlaufsmodifizierender Therapien und unser verbessertes Verständnis der Krankheitsmechanismen und -entwicklung in den letzten Jahren haben die Prognose und den Verlauf der Erkrankung deutlich verändert. Diese Aktualisierung der Behandlungsempfehlung der Multiple Sklerose Therapie Konsensus Gruppe konzentriert sich auf die wichtigsten Empfehlungen für verlaufsmodifizierende Therapien der Multiplen Sklerose im Jahr 2021. Unsere Empfehlungen basieren auf aktuellen wissenschaftlichen Erkenntnissen und gelten für diejenigen Medikamente, die in weiten Teilen Europas, insbesondere in den deutschsprachigen Ländern (Deutschland, Österreich, Schweiz), zugelassen sind.

The entire world seems to have responded to COVID-19 pandemic in a knee-jerk manner with a short mindset without building on the existing strengths of public health infrastructure. National governments cannot be blamed for this as we are dealing with a crisis that comes once in a lifetime. Realising this, the Organized Medicine Academic Guild (OMAG) an association of major health associations in this country has suggested measures for long-term solutions to COVID-19-like pandemics in the form of a policy paper by OMAG.

Background The outpatient setting is a key scenario for the implementation of antimicrobial stewardship (AMS) activities, considering that overconsumption of antibiotics occurs mainly outside hospitals. This publication is the result of a joint initiative by the JPIAMR ARCH and COMBACTE-MAGNET EPI-Net networks, which is aimed at formulating a set of target actions for linking surveillance data with AMS activities in the outpatient setting. Methods A scoping review of the literature was carried out in three research areas: AMS leadership and accountability; antimicrobial usage and AMS; antimicrobial resistance and AMS. Consensus on the actions was reached through a RAND-modified Delphi process involving over 40 experts in infectious diseases, clinical microbiology, AMS, veterinary medicine or public health, from 18 low-, middle- and high-income countries. Results Evidence was retrieved from 38 documents, and an initial 25 target actions were proposed, differentiating between essential or desirable targets according to clinical relevance, feasibility and applicability to settings and resources. In the first consultation round, preliminary agreement was reached for all targets. Further to a second review, 6 statements were re-considered and 3 were deleted, leading to a final list of 22 target actions in the form of a practical checklist. Conclusions This White Paper is a pragmatic and flexible tool to guide the development of calibrated surveillance-based AMS interventions specific to the outpatient setting, which is characterized by substantial inter- and intra-country variability in the organization of healthcare structures, maintaining a global perspective and taking into account the feasibility of the target actions in low-resource settings.

This White Paper by the European Society for Swallowing Disorders (ESSD) reports on the current state of screening and non-instrumental assessment for dysphagia in adults. An overview is provided on the measures that are available, and how to select screening tools and assessments. Emphasis is placed on different types of screening, patient-reported measures, assessment of anatomy and physiology of the swallowing act, and clinical swallowing evaluation. Many screening and non-instrumental assessments are available for evaluating dysphagia in adults; however, their use may not be warranted due to poor diagnostic performance or lacking robust psychometric properties. This white paper provides recommendations on how to select best evidence-based screening tools and non-instrumental assessments for use in clinical practice targeting different constructs, target populations and respondents, based on criteria for diagnostic performance, psychometric properties (reliability, validity, and responsiveness), and feasibility. In addition, gaps in research that need to be addressed in future studies are discussed. The following recommendations are made: (1) discontinue the use of non-validated dysphagia screening tools and assessments; (2) implement screening using tools that have optimal diagnostic performance in selected populations that are at risk of dysphagia, such as stroke patients, frail older persons, patients with progressive neurological diseases, persons with cerebral palsy, and patients with head and neck cancer; (3) implement measures that demonstrate robust psychometric properties; and (4) provide quality training in dysphagia screening and assessment to all clinicians involved in the care and management of persons with dysphagia.

Due to the exponential growth of the number of subjects affected by coronavirus disease 2019 (COVID-19), the entire Italian health care system had to respond promptly and in a very short time with the need of semi-intensive and intensive care units. Moreover, trained dedicated COVID-19 teams consisting of physicians were coming from different specialties (intensivists or pneumologists and infectiologists), while respiratory therapists and nurses have been recruited to work on and on without rest. However, due to still limited and evolving knowledge of COVID-19, there are few recommendations concerning the need in respiratory rehabilitation and physiotherapy interventions. The presentation of this paper is the result of a consensus promoted by the Italian societies of respiratory health care professionals who contacted pulmonologists directly involved in the treatment and rehabilitation of COVID-19. The aim was to formulate the more proper and common suggestions to be applied in different hospital settings in offering rehabilitative programs and physiotherapy workforce planning for COVID-19 patients. Two main areas of intervention were identified: organization and treatment, which are described in this paper to face the emergency.

Researchers face difficulties in finding relevant papers to their research interest as the number of scientific publication is rapidly increasing on the web. Scientific paper recommenders have emerged as a leading solution to help researchers by automatically suggesting relevant and useful publications. Several approaches have been proposed on improving recommender systems. However, most existing approaches depend on priori user profiles, and thus they cannot recommend papers to new user. Furthermore, the existing approaches utilize non-public contextual information, and thus it cannot adequately find similarities between papers due to copyright restrictions. Also, the existing approaches consider only single level paper-citation relation to identify similarities between papers. Considering the above challenges, this paper presents a collaborative filtering based recommendation approach for scientific papers that does not depend on priori user profiles and which utilizes only public contextual information. Using citation context, we utilized 2-level paper-citation relations to find hidden associations between papers. The rational underlying this approach is that, two papers are co-occurred with same cited paper(s) and two papers are co-occurring with same citing paper(s) are significantly similar to some extent. To evaluate the performance of the proposed approach, publicly available datasets are used to conduct extensive experiments. The experimental results demonstrate that the proposed approach has significantly outperforms the baseline approaches in terms of precision, recall, F1, mean average precision, and mean reciprocal rank, which are commonly used information retrieval metrics. The novelty of this study is that, with the proposed approach, researchers are able to find relevant and useful publications over the internet regardless of their previous research experiences and research area.

A paper-based electrode is a very attractive component for a disposable, nontoxic, and flexible biosensor. In particular, wearable biosensors, which have recently been attracting interest, not only require these characteristics of paper-based electrodes but must also be able to detect various ions and biomolecules in biological fluids. In this paper, we demonstrate the detection ability of paper-based metal electrodes for wearable biosensors as part of a wireless potentiometric measurement system, focusing on the detection of pH and sodium ions. The paper-based metal electrodes were obtained by simply coating a silicone-rubber-coated paper sheet with a Au (/Cr) thin film by sputtering then modifying it with different functional membranes such as an oxide membrane (Ta2O5) and a fluoropolysilicone (FPS)-based Na+-sensitive membrane, corresponding to the targeted ions. Satisfactory and stable detection sensitivities of the modified paper-based Au electrodes were obtained over several weeks even when they were bent to a radius of curvature in the range of 6.5 to 25 mm, assuming use in a flexible body patch biosensor. Moreover, the Na+ concentration in a sweat sample was evaluated using the paper-based Au electrode with the FPS-based Na+-sensitive membrane in a wireless and real-time manner while the electrode was bent. Thus, owing to their complex mesh structure, flexible paper sheets should be suitable for use as potentiometric electrodes for wearable wireless biosensors., Graphical abstarct

Refereed/Peer-reviewed At a paper manufacturing mill (PML) that had been previously part of an integrated pulp (bisulphite) and paper mills industry, cyanobacterial blooms were observed in the mill’s aerated stabilization basin (ASB) ponds at about 3 years after pulping had been discontinued. This study aimed to determine the factors that led to bloom occurrences and potential control strategies applicable to the paper manufacturing mill’s, aerated stabilization basin system that discharges wastewaters into a coastal lake. Following discontinuation of pulping, the colour of the wastewaters reduced to low levels (~ 10 Hazen units or less), while the levels of nutrient remained potentially supportive of cyanobacteria growth with total phosphorus at ~ 0.1 mg/L and total nitrogen at > 2.5 mg/L. Incidences of blooms in the ABS were associated with preceding average monthly rainfalls and wind speeds being less (~ 44% and ~ 7%, respectively) and average direct sunlight hours being greater (~ 9%) than the long-term average values. Zinc was investigated for control of cyanobacteria as this metal is less toxic to aquatic organisms and microflora than copper algaecides. In laboratory culture trials, zinc was found to inhibit growth of M. aeruginosa (strain MIC338) and Pseudanabaena sp. when dosed at ~ 2.5 mg/L. The inhibition of cyanobacteria by zinc was found to vary between ASB pond samples which had different in situ chlorophyll a levels. This study found that the PML wastewaters investigated can be supportive of cyanobacterial growth to bloom levels after discontinuation of pulping processes and that zinc has potential as a cyanobacteria control agent.

[Abstract] The accepted use of left ventricular assist device (LVAD) technology as a good alternative for the treatment of patients with advanced heart failure together with the improved survival of the LVAD-supported patients on the device and the scarcity of donor hearts has significantly increased the population of LVAD-supported patients. The expected and non-expected device-related and patient-device interaction complications impose a significant burden on the medical system exceeding the capacity of the LVAD implanting centres. The ageing of the LVAD-supported patients, mainly those supported with the 'destination therapy' indication, increases the risk for those patients to experience comorbidities common in the older population. The probability of an LVAD-supported patient presenting with medical emergency to a local emergency department, internal, or surgical ward of a non-LVAD implanting centre is increasing. The purpose of this trilogy is to supply the immediate tools needed by the non-LVAD specialized physician: ambulance clinicians, emergency ward physicians, general cardiologists, internists, anaesthesiologists, and surgeons, to comply with the medical needs of this fast-growing population of LVAD-supported patients. The different issues discussed will follow the patient's pathway from the ambulance to the emergency department and from the emergency department to the internal or surgical wards and eventually to the discharge home from the hospital back to the general practitioner. In this first part of the trilogy on the management of LVAD-supported patients for the non-LVAD specialist healthcare provider, after the introduction on the assist devices technology in general, definitions and structured approach to the assessment of the LVAD-supported patient in the ambulance and emergency department is presented including cardiopulmonary resuscitation for LVAD-supported patients.

The possibility of exfoliating graphite into graphene sheets allows the researchers to produce a material, termed "graphene paper" (G-paper), conductive as graphite but more flexible and processable. G-paper is already used for electronic applications, like conductors, antennas, and heaters, outperforming metal conductors thanks to its high flexibility, lightness, chemical stability, and compatibility with polymeric substrates. Here, the effectiveness in the use of G-paper for the realization of electrodes on flexible plastic substrates and textiles, and their applicability as amperometric sensors are demonstrated. The performance of these devices is compared with commercial platforms made of carbon-based inks, finding that they outperform commercial devices in sensing nicotinamide adenine dinucleotide (NADH), a key molecule for enzymatic biosensing; the electrodes can achieve state-of-the-art sensitivity (107.2 ?A mm cm) and limit of detection (0.6 × 10 m) with no need of additional functionalization. Thanks to this property, the stable deposition of a suitable enzyme, namely lactate dehydrogenase, on the electrode surface is used as a proof of concept of the applicability of this new platform for the realization of a biosensor. The possibility of having a single material suitable for antennas, electronics, and now sensing opens new opportunities for smart fabrics in wearable electronic applications.

Objectives: The aim of the study was to review the evidence regarding the clinical use and value of fecal calprotectin (FC) measurements in different gastrointestinal disorders in children. Methods: A literature search was conducted in the PubMed, MEDLINE, EMBASE, and Cochrane databases until October 31, 2019. Subtopics were identified and each assigned to individual authors. Results: A total of 28 recommendations were voted on using the nominal voting technique. Recommendations are given related to sampling, measurement methods, and results interpretation. The 14 authors anonymously voted on each recommendation using a 9-point scale (1 strongly disagree to 9 fully agree). Consensus was considered achieved if at least 75% of the authors voted 6, 7, 8, or 9. Conclusions: Consensus was reached for all recommendations. Limitations for the use of FC in clinical practice include variability in extraction methodology, performance of test kits as well as the need to establish local reference ranges because of the influence of individual factors, such as age, diet, microbiota, and drugs. The main utility of FC measurement at present is in the diagnosis and monitoring of inflammatory bowel disease (IBD) as well as to differentiate it from functional gastrointestinal disorders (FAPDs). FC, however, has neither utility in the diagnosis of infantile colic nor to differentiate between functional and organic constipation. A rise in FC concentration, may alert to the risk of developing necrotizing enterocolitis and help identifying gastrointestinal involvement in children with Henoch-Schonlein purpura. FC measurement is of little value in Cow's Milk Protein Allergy, coeliac disease (CD), and cystic fibrosis. FC does neither help to distinguish bacterial from viral acute gastroenteritis (AGE), nor to diagnose Helicobacter Pylori infection, small intestinal bacterial overgrowth (SIBO), acute appendicitis (AA), or intestinal polyps.

BACKGROUND: It is important to identify patients with monogenic IBD as management may differ from classical IBD. In this position statement we formulate recommendations for the use of genomics in evaluating potential monogenic causes of IBD across age groups. METHODS: The consensus included paediatric IBD specialists from the Paediatric IBD Porto group of the European Society of Paediatric Gastroenterology, Hepatology and Nutrition (ESPGHAN) and specialists from several monogenic IBD research consortia. We defined key topics and performed a systematic literature review to cover indications, technologies (targeted panel, exome and genome sequencing), gene panel setup, cost-effectiveness of genetic screening, and requirements for the clinical care setting. We developed recommendations that were voted upon by all authors and Porto group members (32 voting specialists). RESULTS: We recommend next-generation DNA-sequencing technologies to diagnose monogenic causes of IBD in routine clinical practice embedded in a setting of multidisciplinary patient care. Routine genetic screening is not recommended for all IBD patients. Genetic testing should be considered depending on age of IBD-onset (infantile IBD, very early-onset IBD, paediatric or young adult IBD), and further criteria, such as family history, relevant comorbidities, and extraintestinal manifestations. Genetic testing is also recommended in advance of hematopoietic stem cell transplantation. We developed a diagnostic algorithm that includes a gene panel of 75 monogenic IBD genes. Considerations are provided also for low resource countries. CONCLUSIONS: Genomic technologies should be considered an integral part of patient care to investigate patients at risk for monogenic forms of IBD.

Background: The cost-effectiveness of using a mobile diary app as an adjunct in dialectical behavior therapy (DBT) in patientswith borderline personality disorder is unknown.Objective: This study aims to perform an economic evaluation of a mobile diary app compared with paper-based diary cardsin DBT treatment for patients with borderline personality disorder in a psychiatric outpatient facility.Methods: This study was conducted alongside a pragmatic, multicenter, randomized controlled trial. The participants wererecruited at 5 Danish psychiatric outpatient facilities and were randomized to register the emotions, urges, and skills used in amobile diary app or on paper-based diary cards. The participants in both groups received DBT delivered by the therapists. Acost-consequence analysis with a time horizon of 12 months was performed. Consequences included quality-adjusted life years(QALYs), depression severity, borderline severity, suicidal behavior, health care use, treatment compliance, and system usability.All relevant costs were included. Focus group interviews were conducted with patients, therapists, researchers, and industryrepresentatives to discuss the potential advantages and disadvantages of using a mobile diary app.Results: A total of 78 participants were included in the analysis. An insignificantly higher number of participants in the papergroup dropped out before the start of treatment (P=.07). Of those starting treatment, participants in the app group had an averageof 37.1 (SE 27.55) more days of treatment and recorded an average of 3.16 (SE 5.10) more skills per week than participants inthe paper group. Participants in both groups had a QALY gain and a decrease in depression severity, borderline severity, andsuicidal behavior. Significant differences were found in favor of the paper group for both QALY gain (adjusted difference −0.054;SE 0.03) and reduction in depression severity (adjusted difference −1.11; SE 1.57). The between-group difference in total costsranged from US $107.37 to US $322.10 per participant during the 12 months. The use of services in the health care sector wassimilar across both time points and groups (difference: psychiatric hospitalization and 2.02; SE 3.19). Overall, the patients showed high acceptability and considered the app as being easy to use. Therapists worriedabout potential negative influences on the therapist-patient interaction from new work tasks accompanying the introduction ofthe new technology but pointed at innovation potential from digital database registrations.Conclusions: This study suggests both positive and negative consequences of mobile diary apps as adjuncts to DBT comparedwith paper diary cards. More research is needed to draw conclusions regarding its cost-effectiveness. Background:The cost-effectiveness of using a mobile diary app as an adjunct in dialectical behavior therapy (DBT) in patients with borderline personality disorder is unknown.Objective:This study aims to perform an economic evaluation of a mobile diary app compared with paper-based diary cards in DBT treatment for patients with borderline personality disorder in a psychiatric outpatient facility.Methods:This study was conducted alongside a pragmatic, multicenter, randomized controlled trial. The participants were recruited at 5 Danish psychiatric outpatient facilities and were randomized to register the emotions, urges, and skills used in a mobile diary app or on paper-based diary cards. The participants in both groups received DBT delivered by the therapists. A cost-consequence analysis with a time horizon of 12 months was performed. Consequences included quality-adjusted life years (QALYs), depression severity, borderline severity, suicidal behavior, health care use, treatment compliance, and system usability. All relevant costs were included. Focus group interviews were conducted with patients, therapists, researchers, and industry representatives to discuss the potential advantages and disadvantages of using a mobile diary app.Results:A total of 78 participants were included in the analysis. An insignificantly higher number of participants in the paper group dropped out before the start of treatment (P=.07). Of those starting treatment, participants in the app group had an average of 37.1 (SE 27.55) more days of treatment and recorded an average of 3.16 (SE 5.10) more skills per week than participants in the paper group. Participants in both groups had a QALY gain and a decrease in depression severity, borderline severity, and suicidal behavior. Significant differences were found in favor of the paper group for both QALY gain (adjusted difference −0.054; SE 0.03) and reduction in depression severity (adjusted difference −1.11; SE 1.57). The between-group difference in total costs ranged from US $107.37 to US $322.10 per participant during the 12 months. The use of services in the health care sector was similar across both time points and groups (difference: psychiatric hospitalization Conclusions:This study suggests both positive and negative consequences of mobile diary apps as adjuncts to DBT compared with paper diary cards. More research is needed to draw conclusions regarding its cost-effectiveness.

A good quality control system is important to be implemented to increase productivity and minimize defects in products. One of the quality control methods is failure mode and effect analysis (FMEA). This study uses the FMEA to identify the causes of the defects and recommend the prevention methods to overcome the causes of the defects in an Indonesian paper mill. The risk priority number (RPN) is calculated by multiplying the severity, occurrence, and detection of the failures that have been determined. Unsymmetrical and tainted products are the most dominant defects in the paper mill. An inappropriate machine setting is the cause of unsymmetrical products with the highest RPN of 343. The second highest RPN is problems with bleaching machines that caused tainted products with an RPN value of 216. This study offers suggestions to Indonesian paper mill to prevent and minimize defective products.

BACKGROUND The recent rise in the incidence of hepatitis B virus (HBV) infections in a densely populated city of eastern India (“mixing vessel” of people of varied socio-economic and immune status) prompted this study. Applying saliva on fingers for enumerating bank notes is a common practice in the Indian subcontinent. Paper notes may be a potential source of “horizontal” transmission of this virus, especially if there are cuts/bruises on the oral mucous membrane or skin. AIM To investigate whether paper currencies could be a plausible mode of horizontal transmission of HBV infection. METHODS Polymerase chain reactions (PCR) followed by nucleotide sequencing was done for the detection of HBV. Hepatitis B virus surface antigen enzyme-linked immunosorbent assay(HBsAg ELISA) was performed on all HBV deoxyribonucleic acid-positive samples to check the detectability of the virus. Atomic force microscopy (AFM) was carried out for visual confirmation of HBV particles in ultracentrifuged/immunoprecipitated samples from currency paper washings. RESULTS HBV-specific PCRs on pellets obtained after ultracentrifugation/ immunoprecipitation of the currency paper washings detected potentially intact/viable HBV (genotype D2) in 7.14% of samples (n = 70). AFM gave the visual confirmation of HBV particles in ultracentrifuged/immunoprecipitated samples from currency paper washings. However, HBV isolates from the currency notes could not be detected by HBsAg ELISA. CONCLUSION It is a common practice in the Indian subcontinent to count paper currencies by applying saliva on fingertips. Paper notes may be a potential source of “horizontal” transmission of this virus, especially if there are cuts/bruises on the oral mucous membrane or skin, but it was practically not possible to demonstrate experimentally such transmission. Detection of potentially intact/viable and “occult” HBV from currency poses potential risk of silent transmission of this virus among the general population.

Background Propionic acidemia (PA) is an inherited disorder caused by deficiency of propionyl CoA carboxylase. Most patients with this disorder are diagnosed during the neonatal period because of severe metabolic acidosis and hyperammonemia. Patients are required to undergo blood and urine analysis at least 3 to 4 times per year, depending on age and metabolic control. Methods We designed a prospective study in which we investigated the results from blood and urinary samples collected monthly in filter paper from 10 PA patients followed in a single metabolic reference center from January 2015 to September 2017. The aim of this study was to evaluate the usefulness of filter paper samples in the follow‐up of the PA patients. Results During the follow‐up period, 163 dried blood spot (DBS) and 119 urine dried spot samples were analyzed and compared with 160 plasma and 103 liquid urine specimens; 64 specimens of plasma were analyzed for odd‐numbered long‐chain fatty acids (OLCFAs). A total of 40 metabolic crises, 18 of them with hyperammonemia were documented. We observed a strong correlation between the filter paper and the urine/plasma samples for the main PA parameters both in stable metabolic conditions as well as in acute decompensations. Also, there was a strong correlation between OLCFAs measured in plasma and quantification of odd number acylcarnitines in DBS. Conclusions We conclude that filter paper blood and urinary samples can be used for the follow‐up of the patients with PA, correctly reflecting their metabolic situation.

The Lewis-Clark Valley is a rural area that includes the cities of Lewiston, Idaho and Clarkston, Washington and the surrounding areas. The largest industry in the Lewis-Clark Valley is a pulp paper mill located in Lewiston which emits particulate matter and odorous sulfur air pollutants. This study analyzed the Lewis-Clark Valley air composition and seasonal, temporal and spatial variations of volatile organic compounds (VOCs) from 2017 to 2018 to determine potential health risks of the paper mill emissions to the surrounding community. Both active and passive air sampling via sorbent tubes were analyzed by thermal desorption - gas chromatography-mass spectrometry (TD-GC-MS). Fifty VOCs including benzene, toluene, chloroform, dimethyl sulfide and dimethyl disulfide were measured in the ambient air of the Lewis-Clark Valley at ten different sites, totaling over 800 samples. In addition, passive sorbent tubes were deployed in 2018 to obtain monthly averages in Lewis-Clark Valley and three urban locations in Idaho and Washington for comparison. United States Environmental Protection Agency (2001) methodology was used to assess cancer risks in the community based on the upper confidence levels of five carcinogens and nine air toxics. The Lewis-Clark Valley had similar levels of benzene to urban areas but had a strong signature of chloroform and sulfides from the paper mill. The cumulative cancer risk was 2 x 10-6 - 11 × 10-6 mainly due to the compounds chloroform, benzene and carbon tetrachloride. The hazard index of other air toxics was less than one. Overall, these air pollutants were considered low risk to the local population.

Development of paper-based microfluidic devices that perform colorimetric measurements requires quantitative image analysis. Because the design geometries of paper-based microfluidic devices are not standardized, conventional methods for performing batch measurements of regularly spaced areas of signal intensity, such as those for well plates, cannot be used to quantify signal from most of these devices. To streamline the device development process, we have developed an open-source program called ColorScan that can automatically recognize and measure signal-containing zones from images of devices, regardless of output zone geometry or spatial arrangement. This program, which measures color intensity with the same accuracy as standard manual approaches, can rapidly process scanned device images, simultaneously measure identified output zones, and effectively manage measurement results to eliminate requirements for time-consuming and user-dependent image processing procedures.

BackgroundThe EAPC White Paper addresses the issue of spiritual care education for all palliative care professionals. It is to guide health care professionals involved in teaching or training of palliative care and spiritual care; stakeholders, leaders and decision makers responsible for training and education; as well as national and local curricula development groups.MethodsEarly in 2018, preliminary draft paper was written by members of the European Association for Palliative Care (EAPC) spiritual care reference group inviting comment on the four core elements of spiritual care education as outlined by Gamondi et al. (2013) in their paper on palliative care core competencies. The preliminary draft paper was circulated to experts from the EAPC spiritual care reference group for feedback. At the second stage feedback was incorporated into a second draft paper and experts and representatives of national palliative care organizations were invited to provide feedback and suggest revisions. The final version incorporated the subsequent criticism and as a result, the Gamondi framework was explored and critically revised leading to updated suggestions for spiritual care education in palliative care.ResultsThe EAPC white paper points out the importance of spiritual care as an integral part of palliative care and suggests incorporating it accordingly into educational activities and training models in palliative care. The revised spiritual care education competencies for all palliative care providers are accompanied by the best practice models and research evidence, at the same time being sensitive towards different development stages of the palliative care services across the European region.ConclusionsBetter education can help the healthcare practitioner to avoid being distracted by their own fears, prejudices, and restraints and attend to the patient and his/her family. This EAPC white paper encourages and facilitates high quality, multi-disciplinary, academically and financially accessible spiritual care education to all palliative care staff.

Executive SummaryThe EC Directive 2013/59/Euratom states in article 56 that exposures of target volumes in nuclear medicine treatments shall be individually planned and their delivery appropriately verified. The Directive also mentions that medical physics experts should always be appropriately involved in those treatments. Although it is obvious that, in nuclear medicine practice, every nuclear medicine physician and physicist should follow national rules and legislation, the EANM considered it necessary to provide guidance on how to interpret the Directive statements for nuclear medicine treatments.For this purpose, the EANM proposes to distinguish three levels in compliance to the optimization principle in the directive, inspired by the indication of levels in prescribing, recording and reporting of absorbed doses after radiotherapy defined by the International Commission on Radiation Units and Measurements (ICRU): Most nuclear medicine treatments currently applied in Europe are standardized. The minimum requirement for those treatments is ICRU level 1 (“activity-based prescription and patient-averaged dosimetry”), which is defined by administering the activity within 10% of the intended activity, typically according to the package insert or to the respective EANM guidelines, followed by verification of the therapy delivery, if applicable. Non-standardized treatments are essentially those in developmental phase or approved radiopharmaceuticals being used off-label with significantly (> 25% more than in the label) higher activities. These treatments should comply with ICRU level 2 (“activity-based prescription and patient-specific dosimetry”), which implies recording and reporting of the absorbed dose to organs at risk and optionally the absorbed dose to treatment regions. The EANM strongly encourages to foster research that eventually leads to treatment planning according to ICRU level 3 (“dosimetry-guided patient-specific prescription and verification”), whenever possible and relevant. Evidence for superiority of therapy prescription on basis of patient-specific dosimetry has not been obtained. However, the authors believe that a better understanding of therapy dosimetry, i.e. how much and where the energy is delivered, and radiobiology, i.e. radiation-related processes in tissues, are keys to the long-term improvement of our treatments.

Smartphone technology has spread rapidly around the globe. According to a report released by the Korea Information Society Development Institute, about 95% of Koreans aged more than 30 years old owned smartphones. Recently, blood pressure (BP) measurement using a photoplethysmography-based smartphone algorithm paired with the smartwatch is continuously evolving. In this document, the Korean Society of Hypertension intends to remark the current results of smartphone / smartwatch-based BP measurement and recommend optimal BP measurement methods using a smartphone device. We aim to increase the likelihood of success in implementing these new technologies into improved hypertension awareness, diagnosis, and control.

Governance for centralized organizational structures has long roots and well-developed frameworks, including for various specialty areas, such as IT or data governance. However, the introduction of blockchain technology as a supportive tool for implementing decentralized organizations requires a renewed focus for research in the area. The paper utilizes empirical data from blockchain ecosystems in the form of white papers (public communique of intention) to analyze their governance intentions. The empirical findings are based on a review of 241 blockchains and distributed ledger technology white papers, out of which 67 include explicit descriptions of how governance should be organized in the ecosystem. Our empirical research distinguishes between three categories of governance: objectives, mechanisms, and stakeholders. We further identify 28 features for these categories, which are described in an open encoding format. Hence, the paper contributes to the emerging blockchain research field, particularly to the decentralized aspects of blockchain governance research. This research also reveals that blockchain governance does not receive the attention it should as a large majority of ecosystems have not disclosed their governance intentions. The results can be utilized as a framework for future research. The results can also be helpful for industry when designing and developing governance systems.

Tissue paper production frequently combines two main types of raw materials: cellulose fibers from renewable sources and polymer-based additives. The development of premium products with improved properties and functionalities depends on the optimization of both. This work focused on the combination of innovative experimental and computational strategies to optimize furnish. The main goal was to improve the functional properties of the most suitable raw materials for tissue materials and develop new differentiating products with innovative features. The experimental plan included as inputs different fiber mixtures, micro/nano fibrillated cellulose, and biopolymer additives, and enzymatic and mechanical process operations. We present an innovative tissue paper simulator, the SimTissue, that we have developed, to establish the correlations between the tissue paper process inputs and the end-use paper properties. Case studies with industrial interest are presented in which the tissue simulator was used to design tissue paper materials with different fiber mixtures, fiber modification treatments, micro/nano fibrillated cellulose, and biopolymer formulations, and to estimate tissue softness, strength, and absorption properties. The SimTissue was able to predict and optimize a broader range of formulations containing micro/nanocellulose fibers, biopolymer additives, and treated-fiber mixtures, saving laboratory and industrial resources.

Proteinuria is a condition in which an excessive amount of protein is excreted in urine. It is, among others, an indicator of kidney disease or risk of cardiovascular disease. Rapid and reliable diagnosis and monitoring of proteinuria is of great importance for both patients and their physicians. For that reason, a paper-based sensor for proteinuria diagnosis was designed, optimized, and validated utilizing smartphone-assisted signal acquisition. In the first step, a few commonly employed protein assays were optimized and compared in terms of analytical performance on paper matrix. The tetrabromophenol blue method was selected as the one providing a sufficiently low limit of detection (39 mg·L−1) on the one hand and appropriate long-term stability (up to 3 months) on the other hand. The optimized assay was employed for protein-to-creatinine ratio (PCR) determination on a single paper-based sensor. For both analytes the linear ranges were within the clinically relevant range. The analytical usefulness of the developed sensors was demonstrated by a PCR recovery study in artificial urine. The obtained PCR recoveries were from ca. 80 to 150%.

Influenza virus infection is a major worldwide public health problem. Influenza virus infections are associated with a high hospitalization rate in children between the ages of 5 and 14. The predominant reason for poor influenza prognosis is the lack of any effective means for early diagnosis. Early diagnosis of severe illness is critical to improving patient outcome, and could be especially useful in areas with limited medical resources. Accurate, inexpensive, and easy-to-use diagnostic tools could improve early diagnosis and patient outcome, and reduce overall healthcare costs. We developed an interleukin-6 paper-based test strip that used colloidal gold-conjugated antibodies to detect human interleukin-6 protein. These complexes were captured on a paper-based test strip patterned with perpendicular T lines that were pre-coated with anti-human interleukin-6 antibodies. Applied serum samples interacted with these antibodies and presented as colored bands that could be read using a spectrum-based optical reader. The full-spectrum of the reflected light interleukin-6 protein signal could be obtained from the spectral optics module, and the standard could be used to quantitatively analyze interleukin 6 level in serum. We retrospectively evaluated 10 children (23 serum samples) with severe influenza virus infections, 26 children (26 serum samples) with mild influenza virus infections, and 10 healthy children (10 serum samples). Our system, the combined use of a paper-based test strip and a spectrum-based optical reader, provided both qualitative and quantitative information. When used with the optical reader, the detection limit was improved from a qualitative, naked-eye level of 400 pg/ml to a quantitative, optical reader level of 76.85 pg/ml. After monitoring serum interleukin-6 level via our system, we found a high correlation between our system results and those obtainable using a conventional sandwich enzyme-linked immunosorbent assay method (Rho = 0.706, p < 0.001). The sensitivity and specificity for differentiating between severe and mild influenza using our combined method (test strip coupled with optical reader) were 78.3 and 50.0%, respectively. When interleukin-6 was combined with serum C-reaction protein, the sensitivity and specificity were 85.7 and 95.5%, and the receiver operating characteristic area-under-the-curve was quite high (AUC = 0.911, p < 0.001). The potential advantages of our system, i.e., a paper-based test strip coupled with a spectrum-based optical reader, are as follows: 1) simple user operation; 2) rapid turnaround times–within 20 min; 3) high detection performance; and, 4) low-cost fabrication.

The pulp and paper industry has a high potential to contribute to negative emissions through carbon capture and storage (CCS) applied to existing processes. However, there is a need to investigate how CCS solutions also can be combined with implementation of other emerging technologies in pulp and paper mills. This paper investigates the integration of a novel calcination process in two kraft mills and evaluates its potential combination with capture and storage of CO2 from the calcination plant. The alternative calcination process uses electric gas-plasma technology combined with steam slaking and allows replacing the conventional fuel-driven lime kilns with a process driven by electricity. The novel calcination process generates a pure, biogenic, CO2 stream, which provides an opportunity to achieve negative emissions at relatively lower costs. The potential reduction of greenhouse gas emissions when replacing the lime kiln with the plasma calcination concept depends strongly on the emissions intensity of grid electricity, and on whether fossil fuel or biomass was used as a fuel in the lime kiln. If fossil fuel is replaced and electricity is associated with very low emissions, avoided CO2 emissions reach ~50 kt/a for the smaller mill investigated in the paper (ca 400 kt pulp per year) and almost 100 kt/a for the larger mill (ca 700 kt pulp per year). Further emission reductions could then be achieved through CCS from the electrified calcination process, with capture potentials for the two mills of 95 and 164 kt/a, respectively, and capture and storage costs estimated to 36–60 EUR/tCO2.

PURPOSE: Main insight of the study was to evaluate the potential of Perionyx excavatus, an indigenous earthworm of India towards bioconversion of toxic paper mill wastes. The study had considered a comprehensive study over succession of different enzymes and microbial biomasses alongside removal of heavy metals to reflect the qualitative enrichment of the toxic waste through valorisation procedure. METHODS: The process of vermicomposting was performed using ratio of paper mill sludge: cow dung: straw as 5:4:1 and Perionyx excavatus for a period of 60 days. Qualitative enrichment was considered through detailed evaluation of physicochemical parameters and succession of 19 enzymes using API ZYM technology. Heavy metal loads in terms of Zn, Cr, Cu, Pb along with bioaccumulation factor (BAF) were considered to establish functional role of earthworm in bioremediation. Microbial succession was measured in terms of PLFA biomarkers. RESULTS: Enzymatic enrichment of different isozymes of esterase, aminopeptidase and glycosyl hydrolase were found in the vermicompost. A significant reduction of heavy metals was noticed in vermicomposting of primary sludge as Zn > Pb > Cr > Cu and secondary sludge as Zn > Pb > Cu > Cr. An increase in density of Gram positive bacterial and fungal populations was found at the end phase of vermicomposting process which supports maturity of vermicompost. CONCLUSION: Presence of different enzyme activities, reduction of heavy metal loads along with rise of eukaryotic PLFA markers, had illustrated the efficiency of vermicomposting as a valorisation procedure in the qualitative enrichment of toxic organic paper mill sludge.