Search

Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2014 (ICNAAM-2014), 22–28 September 2014 Location: Rhodes, Greece ISBN 978-0-7354-1287-3 In the present paper the Flamelet-Generated Manifold (FGM) chemistry reduction method is implemented and extended for the inclusion of all the features that are typically observed in stationary gas-turbine combustion. These consist of stratification effects, heat loss and turbulence. The latter is included by coupling FGM with the Reynolds Averaged Navier Stokes(RANS)model. Three control variables are included for the chemistry representation: the reaction evolution is described by the reaction progress variable, the heat loss is described by the enthalpy and the stratification effect is expressed by the mixture fraction. The interaction between chemistry and turbulence is considered through a presumed probability density function (PDF) approach, which is considered for progress variable and mixture fraction. This results in two extra control variables: progress variable variance and mixture fraction variance. The resulting manifold is five-dimensional, in which the dimensions are progress variable, enthalpy, mixture fraction, progress variable variance and mixture fraction variance. In addition, a highly turbulent and swirling flame in a gas turbine model combustor is computed, in order to test the 5-D FGM implementation. The use of FGM as a combustionmodel shows that combustion features at gas turbine conditions can be satisfactorily reproduced with a reasonable computational effort. The implemented combustionmodel retains most of the physical accuracy of a detailed simulation while drastically reducing its computational time, paving the way for new developments of alternative fuel usage in a cleaner and more efficient combustion. In the present paper the Flamelet-Generated Manifold (FGM) chemistry reduction method is implemented and extended for the inclusion of all the features that are typically observed in stationary gas-turbine combustion. These consist of stratification effects, heat loss and turbulence. The latter is included by coupling FGM with the Reynolds Averaged Navier Stokes(RANS)model. Three control variables are included for the chemistry representation: the reaction evolution is described by the reaction progress variable, the heat loss is described by the enthalpy and the stratification effect is expressed by the mixture fraction. The interaction between chemistry and turbulence is considered through a presumed probability density function (PDF) approach, which is considered for progress variable and mixture fraction. This results in two extra control variables: progress variable variance and mixture fraction variance. The resulting manifold is five-dimensional, in which the dimensions are progress variable, enthalpy, mixture fraction, progress variable variance and mixture fraction variance. In addition, a highly turbulent and swirling flame in a gas turbine model combustor is computed, in order to test the 5-D FGM implementation. The use of FGM as a combustionmodel shows that combustion features at gas turbine conditions can be satisfactorily reproduced with a reasonable computational effort. The implemented combustionmodel retains most of the physical accuracy of a detailed simulation while drastically reducing its computational time, paving the way for new developments of alternative fuel usage in a cleaner and more efficient combustion.

The preliminary assessment of a Lower Hybrid Current Drive (LHCD) system for the DEMOnstration power plant (DEMO) is mainly focused on the R&D needs of the less conventional RF components of the Main Transmission Line (MTL) and of the launcher. 500 kW, CW klystrons will be used to deliver the RF power to independent Passive Active Multijunction (PAM) launcher modules at 5 GHz. This paper describes the criteria followed to investigate the optimum solution for the RF window used as vacuum barrier between the MTL and the launcher, an open issue in the LHCD system for ITER too. The best candidate, capable of withstanding a power level of, or above, 0.5 MW in CW operation and to satisfy the electrical and thermonuclear requirements, is a Pill-Box assembly, based on a thin single disk of CVD-diamond as dielectric, water cooled at the edge. A thickness of 3 mm, much shorter than half a wavelength of the TE°11 mode in the dielectric as in the conventional window (unfeasible and too expensive with CVD-diamond at these frequencies), is sufficient to limit the exerted stress at the edge under the fracture stress for a maximum pressure applied of 0.9 MPa. In this paper the simulation results of conventional and thin CVD-diamond vacuum windows are presented comparing S-parameters, losses and electric fields in both matching condition and with VSWR = 2, using WR284 and WR229 as input/output rectangular waveguide. © 2014 American Institute of Physics.

Tore Supra is dedicated to long pulse operation at high power, with a record in injected energy of 1 GJ (2.8 MW × 380 s) and an achieved capability of 12 MW injected power delivered by 3 RF systems: Lower Hybrid Current Drive (LHCD), Ion Cyclotron Resonance Heating (ICRH) and Electron Cyclotron Resonance Heating (ECRH). The new WEST project (W [tungsten] Environment in Steady-state Tokamak) aims at fitting Tore Supra with an actively cooled tungsten coated wall and a bulk tungsten divertor. This new device will offer to ITER a test bed for validating the relevant technologies for actively cooled metallic components, with D-shaped H-mode plasmas. For WEST operation, different scenarii able to reproduce ITER relevant conditions in terms of steady state heat loads have been identified, ranging from a high RF power scenario (15 MW, 30 s) to a high fluence scenario (10 MW, 1000 s). This paper will focus on the evolution of the RF systems required for WEST. For the ICRH system, the main issues are its ELM resilience and its CW compatibility, three new actively cooled antennas are being designed, with the aim of reducing their sensitivity to the load variations induced by ELMs. The LH system has been recently upgraded with new klystrons and the PAM antenna, the possible reshaping of the antenna mouths is presently studied for matching with the magnetic field line in the WEST configuration. For the ECRH system, the device for the poloidal movement of the mirrors of the antenna is being changed for higher accuracy and speed.Tore Supra is dedicated to long pulse operation at high power, with a record in injected energy of 1 GJ (2.8 MW × 380 s) and an achieved capability of 12 MW injected power delivered by 3 RF systems: Lower Hybrid Current Drive (LHCD), Ion Cyclotron Resonance Heating (ICRH) and Electron Cyclotron Resonance Heating (ECRH). The new WEST project (W [tungsten] Environment in Steady-state Tokamak) aims at fitting Tore Supra with an actively cooled tungsten coated wall and a bulk tungsten divertor. This new device will offer to ITER a test bed for validating the relevant technologies for actively cooled metallic components, with D-shaped H-mode plasmas. For WEST operation, different scenarii able to reproduce ITER relevant conditions in terms of steady state heat loads have been identified, ranging from a high RF power scenario (15 MW, 30 s) to a high fluence scenario (10 MW, 1000 s). This paper will focus on the evolution of the RF systems required for WEST. For the ICRH system, the main issues are its ELM resil...

The paper addresses new variants of the high pressure resin transfer molding (HP-RTM) process namely high pressure injection RTM (HP-IRTM) and high pressure compression RTM (HP-CRTM) for manufacturing of carbon fiber reinforced composites with high fiber volume content. Both these processes utilize high-pressure RTM equipment for precise dosing and mixing of highly reactive epoxy resin and amine hardener with relatively high throughput rates. The paper addresses results of a study which investigated cavity pressure measurement for both the HP-RTM process variants using a specially designed highpressure RTM mold. The investigations indicate that the cavity pressure built up is a characteristic of the selected process variant. Further the relationship between the applied press force and the cavity pressure in HP-CRTM process was studied.

In this paper we have investigated some old issues concerning four color map problem. We have given a general method for constructing counter-examples to Kempe's proof of the four color theorem and then show that all counterexamples can be rule out by re-constructing special 2-colored two paths decomposition in the form of a double-spiral chain of the maximal planar graph. In the second part of the paper we have given an algorithmic proof of the four color theorem which is based only on the coloring faces (regions) of a cubic planar maps. Our algorithmic proof has been given in three steps. The first two steps are the maximal mono-chromatic and then maximal dichromatic coloring of the faces in such a way that the resulting uncolored (white) regions of the incomplete two-colored map induce no odd-cycles so that in the (final) third step four coloring of the map has been obtained almost trivially., Comment: 27 pages, 18 figures, revised version

This paper investigates the mechanics of a gigahertz oscillator comprising a nanotube oscillating within the centre of a uniform concentric ring or bundle of nanotubes. The study is also extended to the oscillation of a fullerene inside a nanotube bundle. In particular, certain fullerene‐nanotube bundle oscillators are studied, namely C60‐carbon nanotube bundle, C60‐boron nitride nanotube bundle, B36N36‐carbon nanotube bundle and B36N36‐boron nitride nanotube bundle. Using the Lennard‐Jones potential and the continuum approach, we obtain a relation between the bundle radius and the radii of the nanotubes forming the bundle, as well as the optimum bundle size which gives rise to the maximum oscillatory frequency for both the fullerene and the nanotube bundle oscillators. While previous studies in this area have been undertaken through molecular dynamics simulations, this paper emphasizes the use of applied mathematical modelling techniques which provides considerable insight into the underlying mechanisms....

This paper deals with the construction of numerical methods of random initial value problems. Random linear multistep methods are presented and sufficient conditions for their mean square convergence are established. Main statistical properties of the approximations processes are computed in several illustrative examples. Copyright © 2010 John Wiley & Sons, Ltd., Thanks to the anonymous reviewer whose comments greatly enhanced the paper. This work has been partially supported by the Spanish M.E.C. and FEDER grants MTM2009-08587 and TRA2007-68006-C02-02, the Universidad Politecnica de Valencia grant PAID-06-09 (ref. 2588) and Mexican Conacyt.

We report on an investigation into stellar evolution and nucleosynthesis in the low and extremely low metallicity regime, including models of stars with a pure Big Bang composition (i.e. Z=0). The metallicity range of the extremely metal poor (EMP) models we have calculated is -6.5 < [Fe/H] < -3.0, whilst our models are in the mass range 0.85 < M < 3.0 Msun. Many of the EMP and Z=0 models experience violent evolutionary episodes not seen at higher metallicities. We refer to these events as `Dual Flashes' since they are characterised by peaks in the hydrogen and helium burning luminosities occurring at roughly the same time. Some of the material processed by these events is later dredged up by the convective envelope, causing signifcant surface pollution. These events have been reported by previous studies, so our results reaffirm their occurrence -- at least in 1D stellar models. The novelty of this study is that we have calculated the entire evolution of the Z=0 and EMP models, from the ZAMS to the end of the TPAGB, including detailed nucleosynthesis. We have also calculated the nucleosynthetic yields, which will soon be available in electronic format. Although subject to many uncertainties these are, as far as we are aware, the only yields available in this mass and metallicity range. In this paper we briefy describe some of the results in the context of abundance observations of EMP halo stars. This work formed part of SWC's PhD thesis (completed in March 2007) and a series of subsequent papers will describe the results of the study in more detail., 5 pages, 6 figures. To appear in conference proceedings "First Stars III", ed. B. O'Shea, A. Heger & T.Abel

The significant drop of the storage modulus under uniaxial deformation (Payne effect) restrains the performance of the elastomer-based composites and the development of possible new applications. In this paper molecular-dynamics (MD) computer simulations using LAMMPS MD package have been performed to study the mechanical properties of a coarse-grained model of this family of nanocomposite materials. Our goal is to provide simulational insights into the viscoelastic properties of filled elastomers, and try to connect the macroscopic mechanics with composite microstructure, the strength of the polymer-filler interactions and the polymer mobility at different scales. To this end we simulate random copolymer films capped between two infinite solid (filler aggregate) walls. We systematically vary the strength of the polymer-substrate adhesion interactions, degree of polymer confinement (film thickness), polymer crosslinking density, and study their influence on the equilibrium and non-equilibrium structure, segmental dynamics, and the mechanical properties of the simulated systems. The glass-transition temperature increases once the mesh size became smaller than the chain radius of gyration; otherwise it remained invariant to mesh-size variations. This increase in the glass-transition temperature was accompanied by a monotonic slowing-down of segmental dynamics on all studied length scales. This observation is attributed to the correspondingly decreased width of the bulk density layer that was obtained in films whose thickness was larger than the end-to-end distance of the bulk polymer chains. To test this hypothesis additional simulations were performed in which the crystalline walls were replaced with amorphous or rough walls.

This paper presents a performances study of UWB monopole antenna using half-elliptic radiator conformed on elliptical surface. The proposed antenna, simulated using microwave studio computer CST and High frequency simulator structure HFSS, is designed to operate in frequency interval over 3.1 to 40 GHz. Good return loss and radiation pattern characteristics are obtained in the frequency band of interest. The proposed antenna structure is suitable for ultra-wideband applications, which is, required for many wearable electronics applications.

In this paper was demonstrated the effect of preparation condition under vacuum and microwave drying on the mechanical properties of porcelain ceramic foam. The study was based on five different polymeric foam templates with thickness ranging from 0.5 to 4 cm. The templates were impregnated in ceramic slurry with solid loading ranging from 35 to 55 wt. % under vacuum pressure 10−1 Torr and then sintered to 1250°C. Effects of polymeric foam template thickness and solid loading quantity were evaluated based on porosity, density and mechanical properties (compressive and flexural strengths) of the ceramic foam.

Surface texturing as well as boundary slip is an effective approach to increase the tribological performance, friction and load support of lubricated mechanical components. However, in a textured bearing with boundary slip, cavitation, which is generally neglected, is important, and it alters the flow behavior. Therefore, in this paper a novel analytical equation was proposed based on a modified Reynolds equation considering boundary slip and cavitation. The modified Reynolds equation was derived by following the general approach to deduce the Reynolds equation from the Navier-Stokes equation by assuming classical assumptions, except that boundary slip was present. A theoretical investigation was carried out to study the effect of boundary slip including cavitation on the pressure distribution of a pocket bearing. Different slip configurations (full slip, single slip and semi slip) were studied and compared to various pocket depths. The results indicated that the presence of boundary slip both on the lead...

In this paper, the average energy variation with respect to the density of a system of nucleons is studied. A new formula is presented for the nuclear equation of state. This formula is related to an infinite system of protons and neutrons with relatively small thermal excitations. It is shown that the proposed formulation for the nuclear equation of state reproduces the results obtained in the Skyrme-Hartree-Fock (SHF) and Relativistic Mean-Field (RMF) models of nuclear matter. It should be realized that the consistency of the obtained results for nuclear matter with the predictions of well-known SHF and RMF models for symmetric and asymmetric system of nucleons indicates the reliability of this formulation for different types of nuclear matter in large scales such as neutron stars.

This paper reports the influence of Mo and Ni on the tensile properties of the modified 13Cr martensitic stainless steels in tempered condition. Four steels with different content of Mo and Ni were prepared by induction melting followed by hot forging, quenching and tempering. The experimental results showed that the addition of about 1% and 3% Mo has a beneficial effect to increase both the tensile strength and the elongation of the steels. On the contrary, the addition of about 3% Ni into the martensitic stainless steel results in decreasing of both the tensile strength and the elongation. Among the alloys investigated the 13Cr3Mo type steel exhibited largest tensile strength of 1348 MPa and largest elongation of 12%. The observation on the tensile fractured surfaces by using scanning electron microscope supported these findings.

Environmental efforts of European Union are currently going towards circular economy. Tools like Extended Producer Responsibility and Eco-design were established. The circular economy deals with resources availability issue on one hand and waste management on the other hand. There are few pioneering companies all over the world with some kind of circular economy practice. Generally the concept is not very wide-spread. The paper aims to evaluate possibility of transition towards circular economy in Slovak industrial companies. They need to have an active approach to material treatment of their products after usage stage. Innovation is another important pre-condition for the transition. Main problem of current cradle to grave system is landfilling of valuable materials after one cycle of usage. Their potential value for next manufacturing cycles is lost. Companies may do not see connection between waste management and material resource prices and volatility of supplies. Municipalities are responsible for municipal waste collection and treatment in Slovakia. The circular economy operates by cradle to cradle principle. Company manages material flow until the material comes back to the beginning of manufacturing process by itself or by another partners. Stable material supplies with quite low costs are provided this way. It is necessary to deal with environmental problems in phase of product design. Questionnaire survey results show on one hand low involvement of industrial companies in waste management area, however on the other hand they are open to environmental innovations in future.

This paper considers a mathematical model of infectious disease of SIS type. We will analyze the problem of minimizing the cost of diseases trough medical treatment. Mathematical modeling of this process leads to an optimal control problem with a finite horizon. The necessary conditions for optimality are given. Using the optimality conditions we prove the existence, uniqueness and stability of the steady state for a differential equations system.

Additive production techniques have the advantage of manufacturing parts without needing a forming tool. One of the most used additive manufacturing processes is "Fused Deposition Modeling" (FDM) which allows the production of prototypes and end-use parts. Due to the manufacture layer by layer, also complex part geometries can be created in one working step. Furthermore, lightweight parts with specific inner core structures can be manufactured in order to achieve good weightrelated strength properties. In this paper the mechanical behavior of lightweight parts manufactured with the 3D production system Fortus 400mc from Stratasys and the material Polyetherimide (PEI) with the trade name Ultem*9085 is analyzed. The test specimens were built up with different inner structures and building directions. Therefore, test specimens with known lightweight core geometries (e.g. corrugated and honeycomb cores) were designed. A four-point bending test was conducted to analyze the strength properties as well as the weight-related strength properties. Additionally the influence of the structure width, the structure wall thickness and the top layer thickness was analyzed using a honeycomb structure.

In this paper the relationship between different composite morphologies and their mechanical properties is to be investigated. By manufacturing two different tape-based polypropylene composites in a compression moulding process, four varying degrees of compaction will be generated. The morphological structure is analyzed using confocal laser light microscopy and wet chemically etched specimen cross-sections. The etching process removes the amorphous phase in the polymer, making the macromolecular orientations and superstructures visible in the reinforcement tapes. The findings of the morphological analysis will be transferred to the results of mechanical investigations.

Distributive mixing plays an important role in polymer processing, especially for shear-sensitive materials. Many materials with very high filler contents or partly crosslinked materials show a rheological yield point, which makes mixing of such materials very difficult. Due to this fact it is very important to predict the mixing behavior before expensive mixing devices are manufactured or production stops due to insufficient product quality. Besides the mixing quality, both pressure drop and dissipative heating are important quality criteria for mixer geometries. The CARPOW equation presented in this paper is capable to describe the flow behavior of materials with a rheological yield point depending on the shear rate and temperature due to a combination of a Carreau equation and a power law. The implementation of this fluid model in the open source CFD toolbox Open-FOAM® and the combination with a particle tracking approach allow predicting the mixing behavior of such materials in distributive mixing dev...

The current status of the mechanical and electromagnetic design for the ICRF antenna system for W7-X is presented. Two antenna plugins are discussed: one consisting of a pair of straps with pre-matching to cover the first frequency band 25-38 MHz and a second one consisting of two short strap triplets to cover a frequency band around 76 MHz. This paper focusses on the two strap antenna for the lower frequency band. Power coupling of the antenna to a reference plasma profile is studied with the help of the codes TOPICA and Microwave Studio, that deliver the scattering matrix needed for the optimization of the geometric parameters of the straps and antenna box. Radiation power spectra for different phasings of the two straps are obtained using the code ANTITER II and different heating scenarii are discussed. The potential for heating, fast particle generation and current drive is discussed. The problem of RF coupling through the plasma edge and of edge power deposition is summarized. The system contains a prematching capacitor to limit the maximum voltage in the system, and the large mutual coupling between the 2 straps is counterbalanced by the use of a decoupler. The mechanical design highlights the challenges encountered with this antenna: adaptation to a large variety of plasma configurations, the limited space within the port to accommodate the necessary matching components and the watercooling needed for long pulse operation.

Numerous researches have been done in the field of improving PP by adding nanofillers. Consistently good scientific results and positive industrial feedback were reached; however, the industrial interest is still low due to the high technological and financial risks and too less benefit. Our experiments, using the worldwide unique Polymer NanoComposite Injection Molding Compounder (PNC-IMC) which combines the two processing steps of compounding and injection molding, showed an impressive increase of both mechanical and thermal properties, but more or less in the same range than in other publications. Thus we tried to improve the materials by using elongational flow generating devices for better intercalation and exfoliation of nanofillers in the polymer melt. This paper will give an overview on our first investigations, carried out on both a high pressure capillary rheometer (HPCR) and the injection molding machine (IMM) focusing on the mechanical properties. The PNCs were produced at the PNC-IMC with the 3in1 process. After the treatment in the HPCR the material was crushed, plates were prepared using a hydraulic vacuum press and tensile bars were milled, respectively tensile bars were produced with the IMM. The Young's modulus was successfully slightly improved. Thus future research will focus on both, the mechanism of improvement and the implementation of several of these devices into the PNC-IMC.

To estimate the distribution of uranium minerals in Chihuahua, the advanced statistical model "Maximun Entropy Method" (MaxEnt) was applied. A distinguishing feature of this method is that it can fit more complex models in case of small datasets (x and y data), as is the location of uranium ores in the State of Chihuahua. For georeferencing uranium ores, a database from the United States Geological Survey and workgroup of experts in Mexico was used. The main contribution of this paper is the proposal of maximum entropy techniques to obtain the mineral's potential distribution. For this model were used 24 environmental layers like topography, gravimetry, climate (worldclim), soil properties and others that were useful to project the uranium's distribution across the study area. For the validation of the places predicted by the model, comparisons were done with other research of the Mexican Service of Geological Survey, with direct exploration of specific areas and by talks with former exploration workers of the enterprise "Uranio de Mexico". Results. New uranium areas predicted by the model were validated, finding some relationship between the model predictions and geological faults. Conclusions. Modeling by spatial analysis provides additional information to the energy and mineral resources sectors.

In this paper, a theoretical model for the mixing process in a self-wiping co-rotating twin screw extruder by combination of statistical techniques and mechanistic modelling has been proposed. The approach was to examine the mixing process in the local zones via residence time distribution and the flow dynamics, from which predictive models of the mean residence time and mean time delay were determined. Increase in feed rate at constant screw speed was found to narrow the shape of the residence time distribution curve, reduction in the mean residence time and time delay and increase in the degree of fill. Increase in screw speed at constant feed rate was found to narrow the shape of the residence time distribution curve, decrease in the degree of fill in the extruder and thus an increase in the time delay. Experimental investigation was also done to validate the modeling approach.

The aim of this paper is the production of fiber reinforced LLDPE components by rotational molding. To this purpose, a process upgrade was developed, for the incorporation of pultruded tapes in the rotational molding cycle. Pultruded tapes, made of 50% by weight of glass fibers dispersed in a high density polyethylene(HDPE) matrix, were glued on the internal surface of a cubic mold, and rotational molding process was run using the same processing conditions used for conventional LLDPE processing. During processing, melting of LLDPE powders and of HDPE allowed to incorporate the tapes inside rotational molded LLDPE. The glass fiber reinforced prototypes were characterized in terms of mechanical properties. Plate bending tests were performed on the square faces extracted from the rotational molded product. The rotational molding products were also subjected to internal hydrostatic pressure tests up to 10 bar. In any case, no failure of the cubic samples was observed. In both cases, it was found that addition of a single pultruded strips, which corresponds to addition of about 0.6% by weight of glass fibers, involved an increase of the stiffness of the faces by about 25%.

One possibility of directly influencing the temperature profile in an extruder is by tempering the screw. This method is currently used in double-screw extrusion and in certain specialized applications in the field of single-screw extrusion. Significant possibilities of influencing the temperature have been shown, for example, while processing PVC on counterrotating double-screw extruders [1]. However, until now, it has not been possible to theoretically model this effect. This paper will thus introduce a mathematical model which describes the effect of internal screw tempering on the temperature gradient of the material in the extruder, allowing processes using tempered screws to be better designed and dimensioned.

An established method to produce thin walled bottles is Stretch Blow Molding (SBM). Polyethylene terephthalate (PET)-preforms are first heated above their glass transition temperature and subsequently transferred into a closed cavity. In a second step the hot preforms are axially elongated by a stretch rod and simultaneously inflated by pressurized air until a contact with the cavity wall is reached (blowing stage). After a cooling phase, the resulting bottle is ejected and further transferred to a filling station, where the desired liquid content is poured in (filling stage). Alternatively to this sequential procedure, a new process combines the blowing and filling phases. This is done by using the desired liquid content as a pressure medium to inflate the hot preforms. Hence, no separated filling station is required. Moreover the filling time is drastically reduced and the cooling is increased through the heat transfer between hot preform and cold liquid. In the following this process is denoted as liquid-bi-orientation (LBO). Despite of its obvious advantages, LBO is not yet used for industrial series production because SBM is well controlled and established. In this paper the LBO process is investigated by experiments and FE-simulations to obtain a deeper insight and to increase process knowledge. The experiments are conducted at a prototype machine. Hereby, a high speed camera in combination with a transparent cavity enables a recording of the preform deformation. Furthermore, FE-simulations with coupled fluid-structure interactions are conducted to predict the process. In comparison to the high speed video the capabilities of the process model are evaluated.

The influence of the pellet shape on the external coefficient of friction of polypropylene and on the mass flow rate of a single screw extruder is presented in this conference paper. The external coefficient of friction describes the friction between the polymeric bulk material and the screw or the barrel surface. In general, the external coefficient of friction should be rather low at the screw surface and high at the barrel surface in order to achieve a high mass flow rate and sufficient pressure build-up in the conveying zone of a single screw extruder. The measurements of the external coefficient of friction of polypropylene pellets, which are dependent on the shape and the dimensions of the pellets at processing conditions (pressure and velocity), are carried out using a previously developed tribometer. The tests were performed at room temperature on a polished hardened shaft made of screw steel. The effect of the shape of the polypropylene pellets on the mass flow rate is studied using a single screw extruder (Measuring extruder type Dr. Collin E20M). Two different temperature profiles were used for the extrusion experiments. When using the long cylindrical polypropylene pellets a higher extruder output can be achieved compared to the virgin material.

This paper investigates strategies to alter the nano-and-microstructures of carbon-based filler-reinforced polymer matrix composites (PMCs). The matrix materials being studied in this work include polyphenylene sulfide (PPS) and liquid crystal polymer (LCP). A set of experiments were performed to investigate various strategies (i) to fabricate a morphological structure within the polymer matrix; (ii) to develop a thermally and electrically conductive network of nano-scaled fillers; and (iii) to produce a thermally conductive but electrically insulative network of hybrid fillers of nano-and-micro scales. The PMCs' structure-to-property relationships, including electrical and thermal properties, were revealed. In particular, the composites' effective thermal conductivities could be increased by as much as 10-folded over the neat polymers. By structuring the embedded electrically conductive pathways in the PMCs, their electrical conductivities could be tailored to levels that ranged from those of electrical insulators to those of semi-conductors. These multifunctional carbon-based filler-reinforced PMCs are envisioned to be potential solutions of various engineering problems. For example, light-weight thermally conductive PMCs with tailored electrical conductivities can serve as a new family of materials for electronic packaging or heat management applications.

At ASDEX Upgrade the ECRH system has been upgraded to provide up to 4 MW of heating power at 140 GHz (or 2.2 MW at 105 GHz). The power at 140 GHz exceeds the minimum H-mode power threshold for typical high Ip, Bt conditions by approximately a factor of two. The upgrade allows H-modes with dominant electron heating and significant electron-ion heat exchange to be studied, i.e. the situation expected in ITER. This paper reports on systematic studies varying the heating mix with NBI, ICRF and ECRH and its effect on pedestal parameters and core transport. The H-mode pedestal is hardly affected by the choice of heating mix, but the ion temperature in the plasma center is found to vary significantly. The ion channel dominates heat transport and ion temperature gradient modes (ITG) are found to be the most unstable microinstability in all the scenarios considered. R/LTi at half radius reduces by a factor of two when Te/Ti increases from 0.9 to 1.5. TGLF modelling of the electron and ion temperature and electron ...

Appropriate modeling of heat transfer from the polymer material to the injection mold is essential to achieve accurate simulation results. The heat transfer is commonly modeled using convective heat transfer and applying heat transfer coefficients (HTC) to the polymer-mold-interface. The set HTC has an influence on the results for filling pressure, cooling performance and shrinkage, among others. The current paper, presents a new strategy to measure HTC in injection molding experiments using Newtons law of cooling. The heat flux is calculated out of demolding heat (measured by means of calorimetry), injection heat (measured by means of an IR-sensor), cooling time and part mass. Cavity surface area, average mold surface temperature and average part surface temperature lead to the HTC.

Glass and carbon fiber reinforcements in injection molded parts have been used for many decades in combination with thermoplastics. Where short- or long-fiber pellets are used, all areas of the part are nearly equally reinforced by fibers. With local continuous-fiber reinforcements it is possible to reduce fiber usage to the most highly loaded areas of the components along the lines of flux. This method, which draws on principles applied in nature, strengthens the parts with only a slight weight increase compared to non-reinforced parts. The combination of injection molding as a process for large-scale production with the high mechanical properties of continuous-fiber-reinforcements enables the production of high-strength components at reasonable costs. The paper presents the investigation of a process development with injection molded components in combination with wound fiber structures. Fundamental experiments with tensile loaded wound fiber structures regarding to their design influences are presented. On this basis a reinforcement structure for a demonstrator was developed and examined.

The thermal conductivity of various thermally conductive thermoplastics commercially available was determined experimentally and is compared with datasheet values. It was found that in most cases the thermal conductivities in-plane and through-plane deviate substantially from the manufacturers' values. The reasons as different measurement methods, part geometry and specimen preparation are discussed and investigated in detail in this paper. It was found that the through-plane thermal conductivity is strongly dependent on sample preparation, e.g. machining of the sample. In order to provide developers with reliable directional thermal conductivity data, the use of standardized methods is recommended.

Rice which is one of the largest agriculture crops produces around 22% of rice rusk during its milling process. This material is mainly used as fuel for energy generation, which results in an ash, which disposal represents an environmental issue. The rice husk ash (RHA) contains over than 70% of silica in an amorphous form and a lot of applications is being developed for it all over the world. The use of silica as a filler in the tire industry is growing since it contributes significantly to the reduction of fuel consumption of the automobiles, allowing at the same time better traction (safety). This paper presents an evaluation of the use of RHA as filler in rubber tread compounds prepared in lab scale and compares its performance with compounds prepared with commercial silica and carbon black, the fillers normally used in tire industry. Mechanical and rheological properties are evaluated, with emphasis for tan delta as an indicator of tread performance related with rolling resistance (fuel consumption) and wet grip/traction (safety).

This paper investigates the synthesis of Ag NCs in Si(100) substrate by implanting multiple energies and fluences of Ag ions and subsequent thermal annealing.

Since March 2010 the preliminary design of the ITER ICRF Antennas have been developed by CYCLE, a consortium consisting of IPP (Garching), CCFE (Culham), CEA (Cadarache), Politecnico di Torino (Torino) and LPPERM/KMS (Brussels). This paper describes the steps taken to develop the present geometry of the triplet pair Strap Housing Module from a thermal and structural perspective, and shows the critical areas of the structure. Key issues are the manufacturability, (achieved by HIPing - Hot Isostatic Pressing), the ability to handle the radiating plasma thermal flux of 0.35 MW/m2, the RF losses and the neutronic radiation. HIPing is necessary to achieve the complicated system of cooling channels inside the structure, which divides the coolant equally in order to supply each strap in the triplet with 1 l/s of water. The components have also to withstand the strong mechanical forces generated by plasma disruptions affecting all internal structures and the elevated design cooling water pressure of 5MPa. In order to maximise reliability, joints between different materials in the cooling water system have been kept to a minimum. Therefore, in the interests of fabricability and availability, the whole structure is manufactured out of stainless steel (316L(N)IG). The low conductivity of 316L(N)IG demands small wall thicknesses to avoid hot spots; however this reduces the mechanical strength. Consequently an in depth FEM analysis is presented, which was used to find and to improve the critical aspects of this important component and was the best means of finding the optimum between thermal and mechanical performance.

This paper is aimed to study the suitability of bio-polymers, including poly-lactic acid (PLLA) and Mater-Bi, for the production of hollow components by rotational molding. In order to reduce the brittleness of PLLA, the material was mixed with two different plasticizers, bis-ethyl-hexyl-phthalate (DEHP) and poly-ethylene-glycol (PEG). The materials were characterized in terms of sinterability. To this purpose, thermomechanical (TMA) analysis was performed at different heating rates, in order to identify the endset temperatures of densification and the onset temperatures of degradation. Results obtained indicated that the materials are characterized by a very fast sintering process, occurring just above the melting temperature, and an adequately high onset of degradation. The difference between the onset of degradation and the endset of sintering, defined as the processing window of the polymer, is sufficiently wide, indicating that the polymers can be efficiently processed by rotational molding. Therefore, a laboratory scale apparatus was used for the production of PLLA and Mater-Bi prototypes. The materials were processed using very similar conditions to those used for LLDPE. The production of void-free samples of uniform wall thickness was considered as an indication of the potentiality of the process for the production of biodegradable containers.

Surfaces of technical parts are getting more and more attention in terms of functionalization. By modification, additional functionality is given to the part, e.g. self-cleaning effect or antireflection behavior. Nowadays mainly flat surfaces are structured which is a consequence of the available production methods. However, the demand of micro structured free form surfaces is increasing, enabling novel products. A major problem in the mass production (e.g. injection molding) of structured freeform surfaces is to demold these structures without ripping or deforming them due to occurring undercuts. Recently a novel concept was developed which overcomes this limitation. A nickel substrate containing a structure composed of lines orientated in two different directions, one orientated in melt flow direction, the other one perpendicular to that, but both with a cross-section of approximately 45 μm × 55 μm (w × h) was used as a premaster to cast a flexible master. This master made of poly(dimethylsiloxane) (PDMS) was mounted on a bending edge in an injection mold cavity. Within this paper the influence of process parameters on the replication grade of the structure lines depending on the structure orientation was evaluated, varying the holding pressure, melt and mold temperature using statistical design of experiment methods. The replication grade was evaluated by characterizing the shape of the structure lines along the entire process chain, using an infinite focus system. The results show, that the melt temperature has the biggest influence on the dimensions of the structures, the mold temperature only a slight one.

A megawatt-level, 28 GHz electron heating system is being designed to support non-inductive (NI) plasma current (Ip) start-up and local heating and current drive (CD) in H-mode discharges in the National Spherical Torus Experiment Upgrade (NSTX-U). The development of fully NI Ip start-up and ramp-up is an important goal of the NSTXU research program. 28 GHz electron cyclotron (EC) heating is predicted to rapidly increase the central electron temperature (Te(0)) of low density NI plasmas generated by Coaxial Helicity Injection (CHI). The increased Te(0) will significantly reduce the Ip decay rate of CHI plasmas, allowing the coupling of fast wave heating and neutral beam injection. Also 28 GHz electron Bernstein wave (EBW) heating and CD can be used during the Ip flat top in NSTX-U discharges when the plasma is overdense. Ray tracing and Fokker-Planck numerical simulation codes have been used to model EC and EBW heating and CD in NSTX-U. This paper presents a pre-conceptual design for the 28 GHz heating system and some of the results from the numerical simulations.

In an attempt to contribute further insight into the discrepancy between the Lamb shift and elastic scattering determinations of the proton charge radius, a new experiment at MAMI is underway, aimed at measuring proton form-factors at very low momentum transfers by using a new technique based on initial state radiation. This paper reports on first findings of the pilot measurement performed in 2010, whose main goal was to check the feasibility of the proposed experiment and to recognize and overcome potential obstacles before running the full experiment in 2013.

Accurate measurement of modulation transfer function (MTF), or alternatively point spread function, of an x‐ray micro‐CT system is essential for various purposes—to determine scanner resolution, to retrieve further information about a scanned object by image‐processing, etc. In this paper, a new method for MTF measurement is proposed that can be used with any resolution pattern and is more adept at studying MTF spatial variation than the traditional method of using bar pattern analysis. A resolution target used to determine micro‐CT resolution was scanned in a lab‐based nano‐CT system—the image from the nano‐CT gave the ‘ground truth’. The ground truth was quantitavely compared with the micro‐CT projection of same target to determine the point spread function of the system. Results matched well with bar pattern analysis, but the new method was able to study spatial variations while the bar pattern analysis failed.

We have modified scanning transmission x‐ray microscopes (STXM) at the Canadian Light Source and the Advanced Light Source with total electron yield (TEY) detection (TEY‐STXM). This provides improved surface‐sensitive detection, simultaneous with existing bulk‐sensitive transmission detection in the STXM microscopes. We have explored sample‐current and channeltron‐based electron yield detection. Both approaches provide improved surface sensitive imaging and spectroscopy, although channeltron‐based detection is superior. TEY‐STXM provides surface sensitive imaging of ultrathin films such as phase‐separated Langmuir‐Blodgett monolayer films, as well as differentiation of surface and bulk oxides of patterned metallic thin films. This paper will outline the experimental challenges of this method and the opportunities for correlative surface and bulk measurements of complex samples.

The scientists and engineers at Argonne and Brookhaven are collaborating to develop a new nanopositioning system for the NSLS‐II Hard X‐ray Nanoprobe. In this paper we present the design and development of an advanced sample‐scanning stage system prototype for an MLL‐based hard x‐ray nanoprobe. The design and prototyping activities for the Brookhaven NSLS‐II nanopositioning system will also benefit the ongoing development of the Argonne CNM/APS MLL‐based hard x‐ray nanoprobe with hard x‐ray focusing in the nanometer scale.

A graph is called edge‐transitive, if its automorphisms group acts transitively on the set of its edges. In this paper, we prove every connected cubic edge‐transitive graph of order 10p2 is a symmetric graph, where p is a prime.

In this paper, we give a formula for the area of the triangle formed by the vertices that live on a given polynomial, and we generalize this formula to the volumes of $n$-simplices with vertices on a polynomial space curve. To prove these results, we use induction arguments and a well known identity for complete symmetric polynomials., Comment: 6 pages, 1 figure. The results and the proofs are elementary. Most of the proofs based on induction. However, it is interesting to see how the formulas line up, and can be generalized to higher levels one by one

Abant Izzet Baysal University (AIBU);Malaysian Mathematical Sciences Society (Persama);Sci. Technol. Res. Counc. Turkey (TUBITAK);Bolu Governorship and Municipality;Beypi Company, International Conference on Mathematical Science, ICMS -- 23 November 2010 through 27 November 2010 -- Bolu, In this paper we established new Hadamard-type inequalities for functions that co-ordinated Godunova-Levin functions and co-ordinated P-convex functions, therefore we proved a new inequality involving product of convex functions and P-functions on the co-ordinates. © 2010 American Institute of Physics.

In this paper, we shall study on some new subclasses of meromor‐phic functions in the punctured unit disk U = {z:0

In the present paper, the outher obtaoin the sharp Fekete-Szego Inequalities for new class defiend on the open unit disk. The outher also obtain some properties of this class which defined by linear operators.

In this paper we propose GEE‐Smoothing spline in the estimation of semiparametric models with correlated nominal data. The method can be seen as an extension of parametric generalized estimating equation to semiparametric models. The nonparametric component is estimated using smoothing spline specifically the natural cubic spline. We use profile algorithm in the estimation of both parametric and nonparametric components. The properties of the estimators are evaluated using simulation studies.

Dissolved oxygen (DO) is an important parameter in biomedical and cell‐culture applications. Several studies have found cell survival and function to be intimately linked to oxygen concentration. Laminar flow, as observed in microfluidic devices, provides an ideal environment to manipulate and control concentration gradients. In this paper we demonstrate the first characterization of integrated fluorescence‐based oxygen sensors for DO measurement within a cell‐culture bioreactor device. Solid‐state PtOEPK/PS sensor patterns were integrated into the PDMS‐based bioreactor and calibrated for detection of DO concentration with a superimposed layer of collagen and Ishikawa human endometrial cancer cells. The sensor signal of the layer subjacent to the cells was found to follow a Stern‐Volmer model and the intensity ratio was measured to I0/I100 = 3.9 after 3 days in culture. The device provides a novel tool for the control and spatially‐resolved measurement of oxygen levels in cellular assays and cell‐culture ...

Current parameterization of radiation in the CPTEC’s (Center for Weather Forecast and Climate Studies, Cachoeira Paulista, SP, Brazil) operational AGCM has its origins in the work of Harshvardhan et al. (1987) and uses the formulation of Ramaswamy and Freidenreich (1992) for the short‐wave absorption by water vapor. The UK Met Office’s radiation code (Edwards and Slingo, 1996) was incorporated into CPTEC’s global model, initially for short‐wave only, and some impacts of that were shown by Chagas and Barbosa (2006). Current paper presents some impacts of the complete incorporation (both short‐wave and long‐wave) of UK Met Office’s scheme. Selected results from off‐line comparisons with line‐by‐line benchmark calculations are shown. Impacts on the AGCM’s climate are assessed by comparing output of climate runs of current and modified AGCM with products from GEWEX/SRB (Surface Radiation Budget) project.