Search

Ovaj rad opisuje različite pogone tvornice za proizvodnju i preradu papira DS Smith. To su pogon za proizvodnju i preradu starog papira, proizvodnju kartonske ambalaže i pogon za proizvodnju električne i toplinske energije. U pogonu za proizvodnju i preradu papira navedeni su i opisani strojevi: (papir stroj 2 i papir stroj 3) koji sudjeluju u cijelom procesu prerade starog papira u papirne role. Na Wellpap stroju se od papirnih rola proizvode kartonske ploče. Strojevi (Bobst masterflex 160, Bobst 1600, Martin 924, Signode/Octopus) služe za tisak, štancanje i pakiranje kartonske ambalaže. Navedeni su postupci opskrbe, distribucije električne energije i svrha pojedinih elemenata kao što su generatori, transformatori i diesel-agregat. Naglašena je svrha zaštite i signalizacije u sustavu. Cijeli sadržaj je popraćen odgovarajućim slikama i shemama koje služe za približavanje slike rada pogona. This paper describes the various facilities of the DS Smith paper mill. These are the plant for production and processing of waste paper, the production of cardboard packaging and the plant for the production of electricity and thermal energy. In the plant for the production and processing of paper, the following machines are listed and described: (paper machine 2 and paper machine 3) which participate in the entire process of processing waste paper into paper rolls. Cardboard panels are produced from paper rolls on the Wellpap machine. Machines ((Bobst masterflex 160, Bobst 1600, Martin 924, Signode/Octopus) are used for printing, stamping and packaging of cardboard packaging. The procedures for supply and distribution of electricity and purpose of individual elements such as generators, transformers and diesel-generators are listed. The purpose of protection and signaling in the system is emphasized. The entire content is accompanied by appropriate pictures and diagrams that serve to bring the picture of the operation of the drive closer.

Vlastiti pogon u Koprivnici je Tvrtka otvorila, odnosno pokrenula tijekom 1992. godine, te tada započela s proizvodnjom ambalaže u industrijskoj zoni ovoga grada, prema poslovnom modelu koji je bio temelj poslovanja i u samom sjedištu poduzeća u Danskoj. Tvrtka je danas poduzeće koje se promatra kao vodeći stručnjak na tržištu po pitanju proizvodnje ambalaže od lijevanih vlakana, a svoj uspjeh temelji na održivoj i snažnoj strategiji. Izuzev toga, ističe se i kao vodeći proizvođač tehnologije za proizvodnju ambalaže. Logistički sustav Tvrtke je glavni segment koji će biti analiziran u ovome radu, te sve ono što je direktno povezano s njim. On se sastoji od ukupno pet logističkih procesa, a to su redom: obrada narudžbi, upravljanje zalihama, pakiranje, skladištenje i transport. Posebna pozornost će biti, dakako, kao jednom od logističkih procesa, posvećena skladištenju, jer je on središnje tematika ovog rada. Proces skladištenja se sastoji od nekoliko potprocesa, za čije se izvođenje koristi različita skladišna oprema. Za samo skladište je bitna dobra organizacija, odnosno raspored koji omogućava brz protok materijala u čitavom opskrbnom lancu Tvrtke. Organizacija samog skladišnog poslovanja ovisi o brojnim čimbenicima, kao što su npr. veličina skladišta, vrsta skladišta, stupanj mehanizacije, stupanj automatizacije, sposobnostima i iskustvu zaposlenika, itd. The company opened its own facility in Koprivnica in 1992, and then started producing packaging in the industrial zone of this city, according to the business model that was the basis of the business at the company's headquarters in Denmark. Today, the company is seen as a leading expert on the market in the production of cast fiber packaging, and its success is based on a sustainable and strong strategy. Apart from that, it stands out as a leading manufacturer of technology for the production of packaging. The logistics system of the Company is the main segment that will be analyzed in this paper and everything that is directly related to it. It consists of a of five logistics processes, namely: order processing, inventory management, packaging, storage and transportation. Of course, as one of the logistics processes, special attention will be devoted to storage, because it is the central topic of this paper. The storage process consists of several sub-processes, for the execution of which different storage equipment is used. For the warehouse itself, good organization is essential, that is, a layout that enables a quick flow of materials throughout the Company's supply chain. The organization of the warehouse business itself depends on numerous factors, such as, for example, the size of the warehouse, the type of warehouse, the degree of mechanization, the degree of automation, the skills and experience of the employees, etc.

Cilj istraživanja Cilj ovog presječnog istraživanja bio je ispitati je li format diplomskih radova obranjenih na integriranom Studiju dentalne medicine Medicinskog fakulteta Sveučilišta u Splitu u skladu s IMRaD strukturom izvornih znanstvenih članaka s obzirom na dužine glavnih cjelina u tekstu diplomskog rada – Uvoda, Metoda, Rezultata i Rasprave. Materijali i metode Iz digitalnog akademskog arhiva i repozitorija DABAR prikupljeno je 150 diplomskih radova obranjenih na integriranom Studiju dentalne medicine Medicinskog fakulteta Sveučilišta u Splitu u razdoblju od 2016. do 2021. godine. Dužine cjelina diplomskih radova (Uvod, Ciljevi istraživanja, Metode, Rezultati, Rasprava, Zaključak, Sažetak na hrvatskom jeziku, Sažetak na engleskom jeziku) iskazane su brojem riječi, a dužina IMRaD strukture zbrojem riječi Uvoda, Metoda, Rezultata i Rasprave. Podatci su analizirani opisnom statistikom i linearnom regresijom (jednostavna i višestruka). Rezultati U prosjeku po godini je obranjeno 25 diplomskih radova (25 ±1,88) pri čemu najviše u 2019. godini (31 rad), a najmanje u 2018. godini (18 radova). Prema granama dentalne medicine, najzastupljenije su bile teme iz Oralne medicine, Endodoncije i restaurativne dentalne medicine, Protetike te Dječje i preventivne dentalne medicine (105 radova, 70%) pri čemu je bilo najviše diplomskih radova s temama iz Oralne medicine (32 rada, 21,33%). S dužinom IMRaD strukture najjače korelira dužina Uvoda (R = 0,819; R2 = 0,671), potom Rezultata (R = 0,768; R2 = 0,589), dok su dužine Rasprave (R = 0,592; R2 = 0,351) i Metoda (R = 0,197; R2 = 0,039) slabo ili nikako povezane s dužinom IMRaD strukture. U prosjeku, Uvod zauzima malo manje od polovice prostora unutar IMRaD strukture (48,08% ± 11,69%) kod svih pregledanih diplomskih radova. Zaključak Format diplomskih radova obranjenih na integriranom Studiju dentalne medicine Medicinskog fakulteta Sveučilišta u Splitu nije u skladu s IMRaD strukturom izvornih znanstvenih članaka s obzirom na nesrazmjerno dug Uvod unutar IMRaD strukture., Objective The aim of this cross-sectional study was to investigate whether the format of diploma theses defended in the undergraduate Study of Dental Medicine, University of Split School of Medicine, is compatible with the IMRaD structure of original research papers, considering the relative length of IMRaD sections - Introduction, Methods, Results and Discussion. Materials and methods 150 diploma theses, defended between 2016 and 2021 from undergraduate Study of Dental Medicine at The School of Medicine University of Split between 2016. and 2021, have been collected from The Digital Academic Archives and Repositories DABAR. The length of each section of the thesis (Introduction, Research Objectives, Methods, Results, Discussion, Conclusion, Summary in Croatian and English) was expressed as the number of words. The length of the IMRaD structure was calculated as the total word count of Introduction, Methods, Results and Discussion sections. Data were analyzed using descriptive statistics and linear regression. Results On average, 25 theses were defended per year (25 ±1.88). The majority of theses were clinical research reports, with topics in oral pathology, endodontics and restorative dentistry, prosthodontics, and pediatric dentistry (105 theses, 70%) being the most common. The highest correlation with the length of the IMRaD structure in theses was observed for the Introduction (R = 0.819; R2 = 0.671), followed by the Results (R = 0.768; R2 = 0.589), whereas weak and no correlation were observed for the Discussion (R = 0.592; R2 = 0.351) and Methods (R = 0.197; R2 = 0.039), respectively. On average, the Introduction occupied almost half of the length of the IMRaD structure (48.08% ± 11.69%). Conclusion The format of diploma theses defended in the undergraduate Study of Dental Medicine at The School of Medicine University of Split is not compatible to the IMRaD structure of the original research papers, as the introduction is disproportionately long compared to other sections of the IMRaD structure.

Baza podataka iz područja molekularne biologije ima izrazito puno. Postoji tendencija okupljanja baza, a time i informacija na jednom mjestu. Navedeno će pridonijeti boljoj preglednosti znanja što može izravno utjecati na kvalitetu istraživačkih radova. Također, iz različitih laboratorija diljem svijeta dolaze podatci o najnovijim otkrićima. Iz tog razloga izrazito je važno pratiti promjene i znanstvena istraživanja temeljiti na najnovijim spoznajama. Rad prikazuje načine pretraživanja informacija u najznačajnijim biološkim bazama podataka: GenBank, UniProtKB, InterPro, PubMed i Europe PMC. Za temu istraživanja odabran je ljudski inzulin koji pripada porodici inzulina, porodici za koju su vezana mnoga znanstvena otkrića i istraživanja. Za pretraživanje o ljudskom inzulinu odabrana je baza UniProtKB jer na jednom mjestu nudi poveznice prema izvorima informacija odnosno prema publikacijama u bazama PubMed i Europe PMC čime je omogućeno postizanje ciljeva istraživanja koji uključuju: bibliometrijsku analizu publikacija čija otkrića grade zapis o ljudskom inzulinu u bazi UniProtKB te s bibliometrijskog aspekta vrednovanje časopisa u kojima su navedene publikacije objavljane. Analizama na razini publikacija dobiven je uvid o: doprinosu pojedinih zemalja i regija u izgradnji spoznaja o ljudskom inzulinu na molekularnoj razini; autorstvu, koautorstvu i suradnji u znanstvenim radovima o ljudskom inzulinu; provedenim istraživanjima o ljudskom inzulinu na molekularnoj razini. Bibliometrijskom analizom znanstvenih časopisa prikazano je na koji način napraviti dublju analizu numeričke vrijednosti h-indeksa te je naglašena važnost iste. Istraživanjem su ujedno dobivene informacije koje časopise iz prirodnog područja odabrati u svrhu napredovanja u znanstvenom i akademskom sustavu. There are many bases in the field of molecular biology. There is a tendency to gather databases and information in one place. This will contribute to a better transparency of knowledge, which can directly affect the quality of research papers. Also, data on the latest discoveries comes from different laboratories around the world. For this reason, it is extremely important to monitor changes and base scientific research on the latest knowledge. The paper shows ways to search for information in the most important biological databases: GenBank, UniProtKB, InterPro, PubMed and Europe PMC. Human insulin, which belongs to the insulin family, was chosen for the research topic, because many discoveries and researches are related to this family of proteins. For the search on human insulin, the UniProtKB database was chosen because it offers links to sources of information in one place, i.e. to publications in the PubMed and Europe PMC databases, which enables the achievement of the research goals, which include bibliometric analysis of publications on human insulin in the UniProtKB database and, from a bibliometric aspect, the evaluation of journals in which mentioned publications published. Analyzes at the level of publications provided insight into: the contribution of individual countries and regions in the development of knowledge about human insulin at the molecular level; authorship, co-authorship and collaboration in scientific papers on human insulin; conducted research on human insulin at the molecular level. The bibliometric analysis of scientific journals shows how to do a deeper analysis of the numerical value of the h-index, and its importance is emphasized. The research also provided information on which journals from the natural field to choose in order to progress in the scientific and academic system.

Osnivanje Komunističke partije Jugoslavije i začeci komunističke ideologije na jugoslavenskim prostorima mogu se pripisati utjecajima Oktobarske revolucije i pojedincima koji su širili komunističke ideje. Budući da je KPJ djelovala u dvije faze, legalnoj i ilegalnoj, u ovom radu obrađuju se obje s posebnim naglaskom na ilegalnoj koja je bila dugotrajnija. Sintezom relevantne znanstvene literature i korištenjem lista Proleter kao povijesnog izvora, rad istražuje ilegalno djelovanje KPJ u međuraću s naglaskom na razdoblje izlaženja ovog glasila. Rad kroz poglavlja tematski donosi okolnosti koje su utjecale na razvoj KPJ, pregled političkih i društvenih promjena u Europi 1930-ih, rastućeg fašizma, Velike čistke, konflikata koji su vodili u novi veliki rat. Evolucija KPJ u međuratnom razdoblju uzrokovana je njezinom adaptacijom na novonastale promjene koje se događaju unutar partije i države, ali i u svijetu i Kominterni koja rukovodi glavnim odrednicama njezine ideološke borbe. The founding of the Communist Party of Yugoslavia and the beginnings of communist ideology in Yugoslavia can be attributed to the influence of the October Revolution and individuals who spread communist ideas. Since the CPY operated in two phases, legal and illegal, this paper deals with both, but with a special emphasis on the illegal phase, which lasted longer. By synthesizing the relevant academic literature and using the paper Proleter as a historical source, the thesis investigates the illegal activities of the CPY in the interwar period with an emphasis on the period of publication of this newspaper. The thesis through the chapters thematically presents the circumstances that influenced the development of the CPY, an overview of political and social changes in Europe in the 1930s, growing fascism, the Great Purge, conflicts that led to a new great war. The evolution of the CPY in the interwar period was caused by its adaptation to the new changes taking place within the party and the state, but also in the world and the Comintern, which controls the main determinants of its ideological struggle.

U okviru teorije narativne persuazije nastoji se istraživanjima publike ustanoviti koji čimbenici, proizišli iz određenih odlika fikcionalne priče, osnažuju potencijal utjecaja te priče na vjerovanja, stavove ili postupke (njezin „persuazivni potencijal“). Političke serije „kvalitetne televizije“ postaju sve značajniji sukreator političke kulture pa nam je namjera bila u okviru teorije narativne persuazije ispitati persuazivni potencijal ove skupine serija. Cilj istraživanja bio je analizirati istaknutosti i povezanosti pet persuazivnih čimbenika koji nisu do sada zajedno promatrani u istraživanjima persuazije putem serija. To su: percipirani realizam, identifikacija, emocionalna uključenost, evaluacija priče i zainteresiranost (do sada slabije istraživana). U Hrvatskoj smo proveli kvantitativno anketno istraživanje metodom grude snijega. Kao stimulus poslužila nam je serija „Novine“. Od ukupno 522 ispitanika, 309 ispitanika je gledalo „Novine“ i sudjelovalo u glavnom istraživanju persuazivnih čimbenika. Ostale smo sudionike, u cilju pomoćnog istraživanja, ispitivali o razlozima negledanja serije. Rezultati glavnog istraživanja pokazuju izraženost svih persuazivnih čimbenika te snažne i umjerene pozitivne povezanosti među njima. Time ukazuju na visoko izražen persuazivni potencijal političkih serija „kvalitetne televizije“. Istraživanje je proširilo ranije uvide o istaknutosti i povezanosti elementa zainteresiranosti za priču i elementa pozitivne evaluacije priče. Interes za priču i njezina evaluacija snažno su međusobno pozitivno povezani i duboko afektivne prirode. Rezultati sugeriraju i da su gledateljeva zainteresiranost za priču i pozitivan dojam o njoj usko pozitivno povezani s drugim persuazivnim čimbenicima. Vezano za njihovu povezanost s percipiranim realizmom priče, uočena je nešto slabija povezanost s vanjskim nego s unutarnjim realizmom. Narativne strategije i dramaturška snaga same serije stoga će biti od nešto veće važnosti za njihovo osnaživanje, nego li prepoznavanje činjenične vanjske sličnosti sa stvarnim svijetom. Manje od polovice ispitanika „Novine“ je pratilo isključivo tijekom emitiranja na linearnoj televiziji. To sugerira da rejtinzi linearnih emitiranja ne odražavaju masovnost prijema serije u Hrvatskoj., Within narrative persuasion theory, audience research seeks to establish which factors, derived from certain elements of a fictional story, strengthen the potential influence of that story on beliefs, attitudes, or behaviours (its ‘persuasive potential’). Quality TV political series are becoming an increasingly important co-creator of political culture. Therefore, we intended to examine the persuasive potential of this type of TV series within the narrative persuasion theory. The research aimed to analyse the prominence and correlation of five persuasive factors that have not been observed together in TV series persuasion research yet. These factors are perceived realism, identification, emotional involvement, story evaluation, and interest (less researched thus far). We conducted a quantitative survey based on snowball sampling in Croatia. The stimulus was the TV series The Paper. Out of 522 respondents, 309 respondents watched The Paper and participated in the main study of persuasive factors. For additional study, we asked other participants about their reasons for not watching the series. The results of the main study suggest the prominence of all persuasive factors as well as strong and moderate positive correlations between them. They thus point to the highly pronounced persuasive potential of Quality TV political series. The research expanded earlier insights on the prominence and correlations of the interest factor and positive evaluation factor. Interest and evaluation are exceptionally mutually positively correlated and deeply affective. Furthermore, the results suggest that the viewers’ interest and positive evaluation of the story are closely and positively correlated to other persuasive elements. Regarding correlations of the factors with the story’s perceived realism, the correlations with external realism are weaker than those with internal realism. Therefore, the series’ narrative strategies and inner strength will be somewhat more important for their empowerment than recognising the factual similarity with the outside world. Less than half of the respondents watched The Paper weekly on linear TV, which suggests that linear TV ratings do not reflect the total reception of The Paper in Croatia.

„Spol“ i „rod“ se još uvijek doživljavaju kao sinonimi, no među njima postoje jasne distinkcije, pa tako za razliku od spola koji se odnosi na biološke karakteristike s kojima se rodimo, rod predstavlja društvene, kulturološke i povijesne razlike te uloge i očekivanja koje društvo pripisuje ženama i muškarcima. Jedna od najzanimljivijih tema za sociologiju je rodna nejednakost, a proučavajući ovu relaciju povijesno, uviđa se kako su muškarci i žene oduvijek bili nejednaki i to na štetu žena, kojima je uz podređeni položaj bila namijenjena i privatna sfera te briga o djeci i kućanstvu. Iako se može reći da smo još uvijek društvo s patrijarhalnim vrijednostima, Hrvatska je svoje putovanje prema društvu jednakosti započela paralelno s početkom pregovora za ulazak u Europsku uniju, donoseći razne zakone o ravnopravnosti spolova i suzbijanju diskriminacije, ali i osnivanjem Ureda za ravnopravnost spolova Vlade RH i Pravobranitelj/ice za ravnopravnost spolova. Pomoću istraživačkih metoda bibliometrijske analize i analize sadržaja razmatra se zastupljenost članaka unutar znanstvenih časopisa u odnosu na godine objavljivanja, ali i istražuju se tematska područja, u odnosu na područja kojima se bavi sociologija spola i roda. Ukupno je analizirano 93 članka ili 4% svih objavljenih radova u vremenskom razdoblju od dva desetljeća izdavaštva, tj. od 2001.-2021. godine. Analizom sadržaja je uočen jako mali broj radova usmjerenih k teorijskim definicijama spola i roda te pitanju reprodukcije, dok se najčešće piše o temama koje se vežu uz tržište rada, majčinstvo, očinstvo i rad u kući, zatim pitanja seksualnosti, transrodnosti i queer identiteta te feminizma, feminističke kritike znanosti i postmodernizma, "Sex" and "gender" are still perceived as synonyms, but there are clear distinctions between them, so unlike gender, which refers to the biological characteristics we are born with, gender represents social, cultural and historical differences and roles and expectations which society assigns to women and men. One of the most interesting topics for sociology is gender inequality, by analyzing this historical relationship, it is understood that men and women have always been unequal, against women to whom in addition to their subordinate position, were also assigned the private sphere and the care of children and the household. Although we can say that we are still a society with patriarchal values, Croatia began its journey towards social equality in parallel with the beginning of negotiations for entry into the European union, passing various laws on gender equality and combating discrimination, as well as establishing the Office for Gender Equality of the Government of the Republic of Croatia and Ombudsperson for gender equality. Using the research methods of bibliometric analysis and content analysis, the representation of articles in scientific journals is considered in relation to the year of publication, but thematic areas are also investigated, in relation to the areas dealt with in the sociology of sex and gender. A total of 93 articles or 4% of all published works were analyzed in the time period of two decades of publishing, i.e. from 2001.-2021. years. The analysis of the content revealed a very small number of works focused on theoretical definitions of sex and gender and the issue of reproduction, while most often it is written about topics related to the labor market, motherhood, fatherhood and work at home, then issues of sexuality, transgender and queer identity, and feminism, feminist critiques of science and postmodernism

Pravilna prehrana je veoma važna za zdravlje, kod narušenog zdravstvenog stanja je još važnija jer utječe na tijek bolesti i sam ishod iste. Hranjenje spada u 14 osnovnih ljudskih potreba, te je uloga medicinske sestre vrlo bitna kako bi pružila određenu vrstu i količinu pomoći da bi osnovna ljudska potreba bila zadovoljena. Gastrično hranjenje spada u najčešći oblik enteralnog hranjenja. Enteralno hranjenje je važno u stanjima kada je gastrointestinalni trakt očuvan i u funkciji jer apliciranjem hrane doprinosimo boljoj apsorpciji svih važnih nutrijenata. Indicirano je kod pacijenata koji duže od 4 tjedna nisu u mogućnosti uzimati hranu peroralnim putem. Perkutana endoskopska gastrostoma je sigurniji je oblik hranjenja, jeftiniji i ekonomičniji. Ne zahtjeva kirurško zbrinjavanje, manje je invazivna metoda te nema potrebe za općom anestezijom čime se smanjuje rizik od neželjenih komplikacija. Za razliku od nazoenteričnih sondi (nazogastrična sonda, nazoduodenalna i nazojejunalna) koje se obično postavljaju kod kratkotrajnog enteralnog hranjenja u pacijenata kod kojih su očuvani refleksi dišnih puteva, perkutana ednoskopska gastrostoma se postavlja kod pacijenata koji pate od umjerene do teške malnutricije. Prije samog postavljanja PEG sonde i primjene enteralne prehrane potreban je multidisciplinirani pristup, njega sačivanjavaju tim gastroenterologa-endoskopičara koji su odgovorni za postavljanje gastrostome, medicinske sestre, nutricionisti te članovi obitelji. U nekim slučajevima od velike koristi mogu biti i tim psihologa. Cilj postavljanja gastrostome je da se pacijentu osigura nutritivna vrijednost te samim time smanji stopa mortaliteta i rizik nastanka neželjenih komplikacija., Proper nutrition is very important for health, it is even more important in case of impaired health because it affects the course of the disease and its outcome. Feeding is one of the 14 basic human needs, and the role of the nurse is very important in order to provide a certain type and amount of help to satisfy the basic human need. Gastric feeding is the most common form of enteral feeding. Enteral feeding is important in conditions when the gastrointestinal tract is preserved and functioning, because by applying food we contribute to a better absorption of all important nutrients. It is indicated for patients who are unable to take food orally for longer than 4 weeks. Percutaneous endoscopic gastrostomy is a safer, cheaper and more economical form of feeding. It does not require surgical treatment, it is a less invasive method and there is no need for general anesthesia, which reduces the risk of unwanted complications. Unlike nasoenteric tubes (nasogastric tube, nasoduodenal and nasojejunal), which are usually placed during short-term enteral feeding in patients with preserved airway reflexes, percutaneous endoscopic gastrostomy is placed in patients suffering from moderate to severe malnutrition. Before the placement of the PEG tube and the application of enteral nutrition, a multidisciplinary approach is required, which is maintained by a team of gastroenterologists-endoscopists who are responsible for the placement of the gastrostomy, nurses, nutritionists and family members. In some cases, a team of psychologists can be very useful. The goal of placing a gastrostomy is to provide the patient with nutritional value and thereby reduce the mortality rate and the risk of unwanted complications. percutaneous endoscopic gastrostomy, enteral feeding, nurse, nutrition

Predstavnici znanstvenih disciplina, uključujući i sociologe, trebaju biti refleksivni prema svom radu i prema vlastitim istraživačkim aktivnostima. Metodologija, kao jedan od aspekata tih aktivnosti, predstavlja skup pravila o korištenju različitih metoda i tehnika istraživanja. Autor ove disertacije krenuo je od pretpostavke da je moguće identificirati obrasce korištenja različitih metodoloških pristupa u sociologiji te da istraživači trebaju proučavati širi društveni kontekst da bi mogli utemeljeno objasniti pojavljivanje različitih obrazaca korištenja metodoloških pristupa. Slijedom navedenog, da bi se objasnio predmet istraživanja, u ovoj se disertaciji daje pregled teorijskih koncepata iz sociologije znanosti i sociologije znanja te iz refleksivne sociologije. Predmet istraživanja u ovoj disertaciji može se opisati kao proučavanje promjena u metodološkim obilježjima istraživačkih radova u hrvatskoj sociologiji od 60-ih godina prošlog stoljeća pa sve do danas, uključujući i analizu društveno – političkog konteksta u kojem su proučavana obilježja nastajala. Da bi se dobila opširnija slika o istraživanoj problematici, korištene su metode dvaju metodoloških pristupa. Prva metoda predstavljala je kvantitativnu analizu sadržaja istraživanih radova, koja je dala uvid u karakteristike metodoloških obilježja samih radova. U drugoj metodi, korišteni su polu – strukturirani intervjui koji su provedeni na uzorku sociologa, zaposlenih u znanstveno – istraživačkim institucijama. U intervjuima se raspravljalo o društveno – političkom kontekstu u kojem su istraživani radovi objavljeni. Rezultati istraživanja potvrdili su da je došlo do promjena u metodološkim obilježjima radova u promatranom razdoblju, odnosno da je došlo do porasta u kompleksnosti korištene metodologije u hrvatskoj sociologiji te da su opisi te metodologije s vremenom postajali sve detaljniji. U drugom dijelu istraživanja, identificirana su i objašnjena četiri potencijalna faktora pomoću kojih se može opisati društveno – politički kontekst, s naglaskom na 90-e godine prošlog stoljeća. Ti faktori su sljedeći: političke promjene, institucionalne promjene, generacijske promjene i vanjski utjecaji na razvoj sociologije na ovom području. Iako se ne može tvrditi da su identificirani svi elementi na temelju kojih se može jednoznačno objasniti veza između četiriju spomenutih društvenih faktora i promjena u metodologiji, može se dobiti osnovni uvid u njihov odnos, čime se otvara plodonosan prostor za daljnje diskusije i istraživanja na temu ove disertacije. It can be considered important that members of scientific disciplines, including sociologists, have a reflection on their work and their research activities. Methodology as one aspect of these activities is a set of rules on the use of different research methods and techniques. The author of this dissertation started from the assumption that it is possible to identify patterns of use of different methodological approaches in sociology and that some broader context is needed to explain their occurrence. Regarding the theoretical framework of this dissertation, concepts from the sociology of science and knowledge and concepts from social theory about reflexivity were used to explain the research subject. Theoretical concepts from the sociology of knowledge and the sociology of science were used to explain and define the research subject in this dissertation. Also, concepts from these disciplines were used to explain what it means for a sociological community to have a scientific tradition that depends on the broader social context that needs to be explained. As for the concepts from the sociological theory of reflexivity, they were used to explain why it was important to conduct the research about the topic from this dissertation and which factors needed to be taken into account when explaining it. The main subject of this dissertation can be described as observing the changes in the methodological characteristics of research papers in Croatian sociology from the 1960s to the present time. Another subject of this dissertation was to explain the connection between the observed changes in the methodology of the analyzed research papers and the socio – political context in which these changes took place. To obtain a broader picture of the investigated problem, methods from two methodological approaches were used. The first method was a quantitative analysis of the content of the observed scientific papers and on this basis, an insight into the characteristics of the methodological characteristics of these papers was obtained. A total of 2526 papers were analyzed, of which 702 were estimated to be primarily sociological papers. For the second method, semi – structured interviews were conducted with a group of sociologists employed by research institutions. A total of 17 participants from 8 different scientific research institutions positioned in Zagreb, Osijek, and Zadar participated in the interviews. The discussion in the interviews was about the socio – political context in which the analysed papers were published. Specifically, five thematic blocks were represented in the interviews: (1) the state of sociology during the observed period; (2) the socio – political context during the 1990s, which could have influenced the development of sociology; (3) discussion about the results obtained in this dissertation; (4) discussion about the implications of the results; (5) and discussion about the guidelines for the future development of sociology. The research confirmed that there were changes in the methodological features of the papers. In the observed period, there was an increase in the complexity of the methodology used in Croatian sociology. Also, the descriptions of the used methodology were becoming more detailed. This means that in the observed period, more and more different methodological approaches and statistical tests began to be used. Both quantitative and qualitative solutions to research problems began to be part of the methodology used in the papers. Also, the authors of the research papers have progressed from the use of primarily descriptive statistics on their data and began to use different tests from the corpus of bivariate and multivariate statistics. Regarding the progress on the detail of the methodological descriptions, the authors of the research papers began to provide more and more new pieces of information about the procedures they used in their research. Based on this finding, the first hypothesis from this dissertation was confirmed. In the second part of the research, four potential factors that can serve to describe the socio – political context were identified and explained. These factors are political changes as the main factor; institutional changes; generational changes; and international influences on the development of sociology in this area. Based on the results it can be concluded that identified socio – political factors may have had an impact on the increased number of research papers and the greater thematic diversity of these papers during the observed period. Also, it is necessary to conclude that no completely clear link was found between these factors and the development of more complex methodologies in the observed papers. These results only partially support the second hypothesis. It can be considered that all the results from this dissertation represent a fruitful space for further research and discussions on this or similar topics.

Uvod: Ozljede muskulature stražnje natkoljenične lože predstavljaju najčešću muskulaturnu ozljedu u profesionalnom nogometu, a njihov se nastanak najčešće povezuje sa trčanjem pri visokim brzinama kao motoričkim zadatkom koji čini esenciju nogometne igre, ali i uspjeha u nogometnoj igri s obzirom na to da je dokumentirano da se najveći broj golova upravo postižu iz situacija koje dominantno uključuju linearan sprint. S obzirom na veliku incidenciju ozljeda prilikom trčanja visokim brzinama, ali i veliku važnost repetitivnog svladavanja ovog motoričkog zadatka za vrijeme nogometne igre potrebno je voditi adekvatnu dokumentaciju kako bi se na pravi način moglo pristupiti ovom, sve učestalijem problemu. Adekvatna dokumentacija i prepoznavanje rastućih trendova muskulaturnih ozljeda općenito, a posebno muskulature stražnje natkoljenične lože predstavlja tek prvi korak u prevenciji ovakvih ozljeda, povećanju dostupnosti igrača i u povećanju uspješnosti cijele momčadi. Materijali i metode: Istraživanje je provedeno na seniorskoj i razvojnoj momčadi elitnog nogometnog kluba u Aziji. Unutar jedne natjecateljske sezone su, uz pomoć interne klupske tablice, dokumentirane su sve ozljede obje momčadi koje su uzrokovale izbivanje s terena od minimalno tri dana. Momčadi su se razlikovale u broju ispitanika, dobi, broju natjecanja u kojem participiraju te u izlaganju u natjecateljskim utakmicama. Cilj je istraživanja bio provjeriti unutar koje će se momčadi razviti veći broj muskularnih ozljeda, da li će u ukupnome broju dominirati ozljede muskulature stražnje natkoljenične lože, te u kojoj će ih se momčadi razviti veći broj. Rezultati: Za vrijeme natjecateljske sezone 2020./2021. su unutar prve momčadi dokumentirane 63 ozljede u odnosu na 33 koje su dokumentirane u onoj razvojnoj unatoč većem broju igrača koji su participirali u utakmicama razvojne momčadi. Ozljede muskulature stražnje natkoljenične lože nisu dominirale među četiri najčešće ozljeđivanje mišićne skupine donjih ekstremiteta kako je bilo očekivano s obzirom na prethodne, doduše višegodišnje, studije koje su dokumentirale ozljede profesionalnih nogometaša u elitnim klubovima Europe. Veći je broj ozljeda muskulature stražnje natkoljenične lože dokumentiran unutar prve momčadi što je bilo očekivano s obzirom na zahtjeve u smislu broja natjecanja i broja utakmica koji su na početku sezone stajali pred prvom, odnosno, seniorskom momčadi, ali i isprepletanja drugih čimbenika rizika. Zaključak: S obzirom na relativno mali istraživački uzorak ne mogu se donijeti nikakvi čvrsti zaključi na temelju provedenog istraživanja. Svakako bi trebalo razmotriti daljnje praćenje ove dvije momčadi kako bi se potencijalno mogli utvrditi svojevrsni trendovi, ili bi se trebali uključiti klubovi koji također participiraju unutar istih natjecanja kako bi studija dobila na relevantnosti, ali i kako bi se mogle povući paralele i donijeti zaključci slični onima na Europskoj razini., Background: The injuries to the hamstrings represent the most common muscle injuries in professional football and they happen due to the high speed running which is the essential motoric task in the football play. Subsequently, these high speed running acts are responsible for success during the game, or simply said the score. It is documented that the higest number of goals are scored precisely during situations where dominantly linear sprints are incorporated. Due to the high incidence of injuries during high speed running and massive importance of repetitiveness of this motor task during the football game, it is necessary to adequately document these injuries in order to establish the most effective approach to this more and more emerging problem. The right documentation and recognition of growing trends in muscle injuries in general, and of the hamstring muscle group injuries specifically, represents the first step in prevention of this class of injuries, improves availability of players and enhances the success rates of the entire team. Methods: The study was conducted in players of senior and developing (junior) team in an elite football club in Asia. In one competitive season, with the use of internal club database, there were documented all injuries of both teams that caused the player absence longer than three consecutive days. The teams varied in the number of subjects, age, number of contests they participate in and exposure in competitive matches. The aim of this research was proving which team would develop more muscle injuries, would the most of these injuries be the hamstring injuries and which of the teams would suffer from the highest number of the injuries in the forementioned hamstrings. Results: During the season of 2020/2021, there were 63 injuries in the first team, whereas in the second team only 33, in spite of the greater number of players of the second team participating in the matches. The hamstring muscle injuries did not dominate in the group of four most common muscle injuries of the lower extremities as it was anticipated considering the long term studies that were previously conducted in the elite football clubs across Europe. The greater number of muscular injuries to the hamstrings has been documented inside the first team, which was expected due to the bigger demands in terms of the number of leagues and the number of matches played per team, entangled with the risk factors of the senior group, opposed to the developing one. Conclusion: Based on the small sample of subjects in the conducted research, I cannot derive a firm conclusion. More documentation and following of this pair of subject groups should be considered in order to potentially identify the trends regarding muscle injuries to the hamstrings. On the other side, to give the relevance to the study, more elite football clubs that participate in the same leagues and competitions should be included in the future studies, but also to draw a parallel and derive similar conclusions regarding the European clubs of same level.

Poziv na suradnju u A1 časopisu – Croatica et Slavica Iadertina / 225–226 • Poziv na objavljivanje radova u tematskom broju časopisa Croatica et Slavica Iadertina pod naslovom Tijelo, identitet i emocije u hrvatskom i slavensim jezicima, književnostima i kulturama / 227–228 • Call for papers in the thematic Issue of Journal Croatica et Slavica Iadertina entitled Body, Identity and Emotions in Croatian and Slavic Languages, Literatures and Cultures / 229–231

Danas sport doseže sasvim nove granice pa nogometaš osim talenta mora imati i druge sposobnosti kako bi mogao uspjeti u profesionalnom nogometu. Vrlo važan čimbenik u samoj pripremi nogometaša je programiranje tempa kretanja koji omogućuje nogometašu da u određenom trenutku bude izdržljiv, brz i agilan. Izdržljivost, brzina i snaga nužne su i bitne osobine jednog nogometaša. Cilj rada je predočiti važnost programiranja tempa, odnosno uvježbavanje brzinske i specijalne izdržljivosti nogometaša. Today, the sport reaches completely new limits, so a football player must have other abilities in addition to talent in order to succeed in professional football. A very important factor in the preparation of a footballer is the programming of the pace of movement that allows the footballer to be durable, fast and agile at a given moment. Endurance, speed and strength are necessary and essential characteristics of a footballer. The aim of this paper is to present the importance of tempo programming, training the speed and special endurance of football players.

Osnovni cilj istraživanja je utvrditi postoji li značajna povezanost između sociodemografskih obilježja obitelji i maloljetnika i recidivizma u izvršavanju kaznenih djela kod maloljetnika. Istraživanjem su obuhvaćeni maloljetni delinkventi – izvršitelji kaznenih djela bez obzira na vrstu kaznenog djela i vrstu izrečenih zakonskih sankcija. U okviru ovog istraživanja obrađeni su podaci koji se odnose na ukupno 161 delinkventa. Prvu skupinu varijabli čine opći podaci o ispitanicima. Drugu skupinu varijable koje su povezane sa sociodemografskim obilježjima obitelji. Treću skupinu varijabli čine one koje se odnose na intenzitet delinkventne aktivnosti maloljetnika. Četvrtu skupinu čine one koje su povezane s poremećajima u ponašanju maloljetnih delinkvenata. Petu skupinu varijabli čine one koje se odnose na školovanje maloljetnika. Među varijablama za koje je u ovom istraživanju utvrđeno da su statistički značajno povezane s recidivizmom nalaze se mlađa životna dob, redoslijed rođenja, maloljetnici čiji roditelji imaju niže obrazovanje, oni čiji otac radi na slabije plaćenim poslovima, agresivno ponašanje maloljetnika, bježanje iz škole, neki oblici ovisnosti (snifanje i tabletomanija), učestalo mijenjanje školske sredine i ponavljanje razreda. Redoslijed rođenja četiri puta povećava šansu za pojavu recidivizma, a najveći doprinos mogućoj pojavi recidivizma ima promjena škole jer ta varijabla povećava šansu recidivizma čak 7, 3 puta. Protektivnu vrijednost u odnosu na recidivizam pokazale su varijable starija životna dob, uspjeh u školi i viša školska sprema roditelja

Tradicija zapisivanja ljudskog znanja seže u daleku povijest. Prije papira neki od glavnih materijala za zapisivanje ljudskog znanja bili su kamen, drvo, papirus, pergamena i sl., koji su korišteni kod starih civilizacija poput Sumerana i Egipćana. Izumom papira u Kini u 2. st. prije Krista i njegovim dolaskom u Europu preko Arapa nekoliko stoljeća poslije mijenja se način zapisivanja znanja, a veliku je ulogu papir odigrao i u povijesti tiskarstva. Jedni od prvih mlinova u Europi razvili su se u Italiji koja je zbog toga bila jedan od najvećih izvoznika papira i njime opskrbljivala velik dio Europe (posebno je poznat po kvalitetnom papiru bio grad Fabriano koji se ističe i vodenim znakovima (filigranima) koje utiskuje u svoj papir). U Hrvatskoj se proizvodnja papira razvija krajem 17. i u 18. stoljeću. Danas se upotrebljavaju raznolike vrste papira, i, iako je digitalno doba u punom zamahu, papir i dalje ostaje glavni materijal za zapisivanje znanja i medij za razmjenu informacija. Tradition of writing down human knowledge has a long history. Before paper some of the most used writing materials were stone, wood, papyrus, parchment etc., which were used by the ancient civilizations such as Sumerians and Egyptians. Discovery of paper in China in 2nd century B.C and its arrival in Europe via Arabsa few centuries later changed the way of writing human knowledge, and paper played a significant role in the history of printing. Some of the first paper mills in Europe developed in Italy, and because of that Italy was the greatest exporter of paper for the needs of whole Europe (the city of Fabriano was especially known for its excellent quality paper with watermarks that were pressed into paper). The production of paper in Croatia starts in 17th and 18th century. Many different kinds of paper are in use today and, even if the digital era is in full swing, paper still stays the most important writing material and medium for knowledge exchange.

U ovom radu opisani su glavni elementi elektroenergetskog postrojenja. Nabrojane su izvedbe, principi rada, prednosti i mane pojedinih elemenata i materijali od kojih se izrađuju. Sve je dijelove potrebno pravilno dimenzionirati za predviđena opterećenja. Osim dijelova postrojenja, teorijski su opisani tokovi snaga. Proizvodnja u sustavu mora u svakom trenutku biti jednaka potražnji potrošača. Potrošnja se može prikazati dijagramima opterećenja. Razlikuju se dnevni, tjedni, sezonski i godišnji dijagrami opterećenja. Kao zaključni dio rada objašnjeno je postrojenje 110/6,3 kV tvrtke DS Smith u Belišću. Prikazana je krivulja proizvodnje generatora u slučaju iznenadnog prestanka rada papir stroja. This paper describes the main elements of a power plant. Performances, principles of work, advantages and disadvantages of individual elements and materials from which they are made are listed. All parts must be properly dimensioned for the intended loads. In addition to plant parts, power flows are theoretically described. Production in the system must always be equal to consumer demand. Consumption can be shown by load diagrams. There are daily, weekly, seasonal and annual load diagrams. As a concluding part of the paper, the 110/6.3 kV plant of DS Smith in Belišće was explained. The generator production curve in the event of a sudden paper machine shutdown is shown.

U teorijskom dijelu završnog rada sažeto je opisana toplinska obrada metalnih materijala i navedena podjela postupaka toplinske obrade. Predstavljen je postupak poboljšavanja čelika, izbor temperature austenitizacije, metode gašenja, temperature popuštanja te način provedbe pojedinih faza. Objašnjen je utjecaj parametara toplinske obrade na svojstva čelika te pojam kaljivost i zakaljivost čelika. Sažeto su predstavljeni nelegirani i legirani čelici za poboljšavanje, njihov kemijski sastav, svojstva i primjena. U praktičnom dijelu rada predstavljen je niskolegirani čelik za poboljšavanje 42CrMo4. Opisane su sve faze toplinske obrade poboljšavanja monoblok kotača. Također je opisano ispitivanje, In the theoretical part of the final paper, the heat treatment of metallic materials is briefly described and the division of heat treatment processes is stated. The process of hardening and tempering, selection of austenitization temperature, quenching methods, tempering temperature and the method of implementation of individual phases are presented. The influence of heat treatment parameters on the properties of steel and the terms hardenability and potential hardness increase of steel are explained. Non-alloy and alloy steels for hardening and tempering, their chemical composition, properties and application are briefly presented. In the practical part of the paper, low-alloy steel 42CrMo4 for hardening and tempering is presented. All phases of hardening and tempering of monoblock wheel are described. Hardness testing after hardening and after tempering is also described.

U ovom radu autor se bavi analizom mađarizacijskog sadržaja lista „Muraköz – Medjimurje“ u razdoblju od 1884. do 1914. godine. Cilj takvog postupka istraživanje je na koje su sve načine mađarizacijski krugovi pokušavali putem novinskog sadržaja utjecati na nacionalni identitet međimurskog stanovništva, odnosno je li i kako je pojava hrvatskih preporoditelja utjecala na povećanje intenziteta provođene mađarizacije. U tu svrhu, nakon predstavljanja samoga lista i njegovog uredništva, napravljena je osnovna podjela na njegov sadržaj koji su novine samo prenosile i sadržaj koji su samostalno kreirale, odnosno na 'unutarnju' i 'vanjsku' mađarizaciju. Osim samim mađarskim i „međimurskim“ jezikom, rad se stoga bavi i uporabom povijesti u identitetske svrhe, proslavama nacionalnih praznika i važnih ličnosti iz mađarske nacionalne povijesti te agitiranjem i inicijativama u svrhu usađivanja mađarstva u međimurski javni prostor. Naposljetku, u posljednjem dijelu rada osvrt je pružen na sukob uredništva lista s predstavnicima hrvatskoga nacionalnog pokreta u Međimurju. In this thesis, the author analyzes the Magyarization content of the paper „Muraköz – Medjimurje“ in the period from 1884 to 1914. The aim of such a process is to examine the ways in which Magyarization circles tried to influence the national identity of the population of Međimurje through paper's content; also to examine whether and how the appearance of Croatian national revivalists influenced the increase in the intensity of Magyarization carried out by the paper. To this end, after the presentation of the paper itself and its editorial board, a basic division was made into its content, which the paper only transmitted, and the content its editorial board independently created; also a division into 'inner' and 'outer' Magyarization processes. In addition to the use of the Magyar and „Intermurakian“ languages, this thesis deals with the use of history for identity purposes, celebrations of national holidays and important figures from Hungarian national history, as well as with the agitation and the initiatives to imbed Hungarian content into the public space of Međimurje. Finally, in the last part of the thesis, a review is given of the conflict between the paper's editorial board and representatives of the Croatian national movement in Međimurje.

Recikliranje (oporaba) je postupak kojim se omogućava ponovna uporaba otpada u proizvodnom procesu. Obuhvaća preradu već korištenih materijala u nove proizvode pa se na taj način potencijalno korisni materijali ne bacaju, već se koriste u novoj proizvodnji. Recikliranje se temelji na relativno jednostavnom načelu: otpad treba promatrati kao sirovinu, čime se istovremeno smanjuje potreba za novim prirodnim dobrima, kao i količina otpadne tvari koju treba negdje odložiti. Zaštita okoliša skup je aktivnosti i mjera za sprečavanje opasnosti za okoliš, nastanka šteta i/ili onečišćivanja okoliša, smanjivanja i/ili otklanjanja šteta nanesenih okolišu te povrata okoliša u stanje prije nastanka štete. Svojim završnim radom pokušala sam djeci predočiti probleme vezane uz okoliš kojih oni još nisu svjesni. Kroz provedene aktivnosti nastojala sam im pokazati postupak recikliranja papira i način na koji se dobiva novi papir bez zagađivanja okoliša. Ispitivanje sam provela na uzorku od 5 djece i 5 njihovih roditelja. Djeca su iz srednje odgojne skupine DV „Jelenko“ u Osijeku. U radu s djecom uvjerila sam se da djeca imaju neka znanja o otpadu, a ja sam ih dodatno uputila u važnost recikliranja otpada. Potom sam putem komunikacije s djecom i dodatnom aktivnošću pokazala kako oni sami mogu doprinijeti očuvanju okoliša. Smatram bitnim navesti da se djeca u vrtiću već u toj dobi trebaju upoznavati s tematikom otpada jer se odmalena uče dobrim navikama kao što je tako postupanje s otpadom, odnosno papirom. Recycling is a process that allows the reuse of waste in the production process. It includes the processing of used materials into new products, so that potentially useful materials are not thrown away, but are used in new production. Recycling is based on a relatively simple principle: waste should be observed as a raw material, which at the same time reduces the need for the use of new natural resources, as well as the amount of waste that needs to be disposed of somewhere. Environmental protection is a set of activities and measures for the prevention of environmental hazards, the occurrence of damage and / or environmental pollution, the reduction and / or elimination of damage to the environment and the return of the environment to the state before the damage occurred. With my final thesis, my aim was to present to the children environmental problems of which they are not yet aware. Through implemented activities I tried to show them the process of paper recycling and how to get new paper without polluting the environment. I conducted the study on a sample of five children as well as their parents. The children are from the middle educational group in Kindergarten "Jelenko" in Osijek. While working with the children, I was convinced that children do have some knowledge regarding waste, and I additionally instructed them regarding the importance of recycling waste. Then, through communication and additional activity with the children, I showed them how they themselves can contribute to the preservation of the environment. I think it is important to state that children in kindergarten should be introduced to the topic of waste at this age, because they acquire good habits from an early age, and therefore learn how to deal with waste as well as paper waste.

Superkondenzatori se ističu velikom specifičnom snagom koju mogu isporučiti što im daje prednost pred ostalim elektrokemijskim spremnicima i pretvornicima energije. Glavni nedostatak im je mala količina energije koja se može uskladištiti u usporedbi s galvanskim člancima. S druge strane, galvanski članci pak posjeduju malu specifičnu snagu. Iz tog razloga pažnju privlače hibridni superkondenzatori, odnosno asimetrični superkondenzatori gdje je jedna elektroda napravljena od materijala s kapacitivnim ponašanjem odnosno grafena, a druga od materijala kod kojeg se odvija faradejska reakcija odnosno od cinka. U ovom radu provedena je priprema grafenskog papira koji je korišten u izradi dva hibridna superkondenzatora: Zn pločica/rGO papir hibridni superkondenzator te rGO papir-Zn/rGO papir hibridni superkondenzator. rGO papir je okarakteriziran XRD metodom, FTIR spektroskopijom te je ispitana njegova električna provodnost. Pri tome je dokazano da je uspješno provedena elektrokemijska redukcija GO. Metode kojima su ispitane karakteristike hibridnih superkondenzatora su ciklička voltametrija (CV), elektrokemijska impedancijska spektroskopija (EIS) te kronopotenciometrija (CP). Kod oba superkondenzatora su dobiveni strujni vrhovi koji pokazuju da dolazi do taloženja/otapanja cinka. Zn pločica/rGO papir hibridni superkondenzator pokazao je specifični kapacitet od 44,48 F/g pri struji od 0,36 A/g, specifičnu energiju od 12,11 Wh/kg i specifičnu snagu od 1,26 kW/kg, dok je kod rGO papir- Zn/rGO papir hibridnog superkondenzatora zabilježen specifični kapacitet od 47,83 F/g pri struji od 0,83 A/g, specifična energija od 13,02 Wh/kg te specifična snaga od 10,13 kW/kg. Supercapacitors are characterised by high power density that is an advantage of supercapacitors over the batteries. The main disadvantage of supercapacitors is the small amount of energy that can be stored. For this reason, hybrid supercapacitors attract significant attention. Hybrid supercapacitors contain one electrode made of a capacitive material such as graphene, and the other electrode made of a material in which faradaic reaction takes place such as Zn. In this work, the graphene paper was used in order to assemble two hybrid supercapacitors: Zn plate/rGO paper hybrid supercapacitor and rGO paper-Zn/rGO paper hybrid supercapacitor. rGO paper was characterized by XRD method, FTIR spectroscopy and its electrical conductivity was determined. It was proven that the electrochemical reduction of GO was successfully carried out. Methods used to examine the characteristics of hybrid supercapacitors were cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronopotentiometry (CP). For both supercapacitors were obtained characteristic current peaks, which indicate that zinc deposition/dissolution takes place. Zn plate/rGO paper hybrid supercapacitor showed specific capacitance of 44.48 F/g at the constant current of 0.36 A/g, specific energy of 12.11 Wh/kg and specific power of 1.26 kW/kg, while rGO paper- Zn/rGO paper hybrid supercapacitor showed specific capacitance of 47.83 F/g at the constant current of 0.83 A/g, specific energy of 13.02 Wh/kg and specific power of 10.13 kW/kg.

U radu je izvedena analiza tokova vode u različitim postrojenjima za proizvodnju celuloze, papira i kartona. Utvrđeno je da ova postrojenja imaju iznimno veliku potrošnju vode, čak i do 40 000 m 3 na dan uz iznimno visoka opterećenja suspendiranim tvarima (do 5 000 mg/dm 3 ), KPK vrijednosti (do 2 000 mg/dm 3 ) i BPK 5 vrijednosti (do 700 mg/dm 3 ). Obrada ovakvih voda je nužna prije ispusta u sustav javne odvodnje, a posebice prilikom ispusta u površinske vode. Primjenom procesa pročišćavanja primarnim taloženjem, koagulacijom, flokulacijom, flotacijom i sekundarnom obradom moguće je ovakve vode pročistiti do zakonom propisanih vrijednosti. Značajno manja količina vode se koristi u proizvodnji kartona što ukazuje na potrebu prikupljanja i recikliranja otpadnog papira, čime se znatno smanjuje upotreba svježe vode, korištenje kemikalija i osigurava zaštita okoliša. Analizom rezultata kakvoće obrađene otpadne vode tvornice kartona utvrđeno je da dobivene vrijednosti prelaze one propisane zakonom. Pokazatelji kakvoće otpadne vode iz tvornice celuloze i papira pokazuju da se ovakve vode mogu ispustiti u sustav javne odvodnje. The analysis of the water streams in different plants for cellulose, paper and cardboard production has been examined. These plants have extremely high water consumption, even up to 40 000 m 3 per day with extremely high loads of suspended solids (up to 5 000 mg/dm 3 ), COD values (up to 2 000 mg/dm 3 ) and BOD 5 values (up to 700 mg/dm 3 ). The wastewater treatment of these streams is obligatory before their discharge into the sewage systems, particularly in case of discharge into the surface water streams. Treatments with the primary sedimentation, coagulation, flocculation, flotation and secondary treatment, are suitable for achieving parameters subscribed by law. Significantly less water consumption is needed in the cardboard production, which indicates the need for collecting and recycling paper waste which would significantly reduce the use of fresh water and chemicals, as well as ensure environmental protection. The analysis of the quality of treated wastewater from cardboard production shows that the obtained values exceed those prescribed by the law. Indicators of the quality of wastewater from cellulose and paper production show that such water can be discharged into the public sewage system.

U završnom radu opisan je utjecaj korozije na svojstva metalnih materijala i pojedini oblici korozije. Sažeto je predstavljen razvoj korozijski postojanih čelika. Objašnjen je utjecaj legiranja na strukturu i svojstva korozijski postojanih čelika. Predstavljene su pojedine skupine korozijski postojanih čelika, način proizvodnje, kemijski sastav, struktura, svojstva, postupci obrade i primjena., The final paper describes the influence of corrosion on the properties of metallic materials and certain forms of corrosion. The development of corrosion resistant steels is briefly presented. The influence of alloying on the structure and properties of corrosion resistant steels is explained. Individual groups of corrosion-resistant steels, method of production, chemical composition, structure, properties, processing procedures and applications are presented.

U teorijskom dijelu završnog rada ukratko je opisan proces proizvodnje aluminija iz boksita. Navedena je podjela legura aluminija prema različitim kriterijima, njihovo označavanje i opisan postupak toplinske obrade precipitacijskog očvršćivanja. Posebno su opisane lijevane aluminijeve legure i navedene njihove specifičnosti. Opisana je primjena aluminijskih legura u različitim granama industrije i navedeni primjeri primjene. U praktičnom dijelu rada opisan je tehnološki proces izrade aluminijskog odljevka. Opisane su sve faze procesa, od izrade pješčanih jezgri, preko lijevanja taline pa sve do strojne obrade i završne kontrole odljevka., In the theoretical part of the final work, the process of aluminum production from bauxite is briefly described. The division of aluminum alloys according to different criteria, their marking and the process of heat treatment of precipitation hardening are described. Cast aluminum alloys are specifically described and their specifics are stated. The application of aluminum alloys in various branches of industry is described and examples of application are given. In the practical part of the paper, the technological process of making an aluminum casting is described. All stages of the process are described, from the production of sand cores, through the casting of melt to machining and final control of the casting.

U završnom radu predstavljen je sivi lijev, vrsta željeznog lijeva čija struktura se sastoji od feritne ili perlitne matrice i listića grafita. Sažeto je opisana proizvodnja sivog lijeva, utjecaj kemijskog sastava na strukturu i svojstva, kao i vrste sivog lijeva. Opisana je struktura sivog lijeva, primarna i sekundarna kristalizacija. Navedena su svojstva sivog lijeva: tehnološka, mehanička, fizička, tribološka i eksploatacijska, prednosti i nedostaci, kao i primjeri primjene. Objašnjeno je označavanje sivog lijeva. Sažeto su opisani najčešći postupci toplinske obrade kojima se poboljšavaju svojstva sivog lijeva., The final paper presents gray cast iron, a type of cast iron whose structure consists of a ferrite or pearlite matrix and graphite flakes. Production of gray cast iron, the influence of the chemical composition on the structure and properties, as well as the types of gray cast iron is briefly described. The structure of gray cast iron, primary and secondary crystallization is described. The properties of gray cast iron are given: technological, mechanical, physical, tribological and exploitation, advantages and disadvantages, as well as examples of application. The marking of gray cast iron is explained. The most common heat treatment processes that improve the properties of gray cast iron are briefly described.

Motivacija za pisanje ovoga rada je želja za prikupljanjem, vrednovanjem, organiziranjem i objavljivanjem sadržaja koji će dati pregled područja te koristiti stručnoj i znanstvenoj zajednici u daljnjemu radu. Građa za bibliografiju radova s područja košarke objavljenih u Hrvatskoj do 2019. : znanstveni i stručni članci se bavi znanstvenim i stručnim člancima kao rezultatima stručnog i znanstveno-istraživačkog rada na području košarkaške igre u Hrvatskoj od početaka zabilježenih sustavnih istraživanja 1970-tih zaključno s 2018. godinom. Uvodna poglavlja daju sažeti pregled osnova bibliografije i košarkaške igre. Bibliografski popis donosi isključivo kategorizirane znanstvene i stručne radove u dva niza: Znanstveni i stručni članci u časopisima i Znanstveni i stručni radovi u zbornicima sa skupova, s ukupno 384 bibliografske jedinice. Zapisi sadrže osnovne elemente bibliografskog opisa, redani su kronološki, a unutar godišta abecedno prema autorskoj odrednici. Pomoć u pristupu i pretraživanju popisa osiguravaju tri kazala: kazalo autora, predmetno kazalo i kazalo časopisa. Izvori za sastavljanje bibliografije su većinom sekundarni što ostavlja mjesta za daljnja istraživanja i dopunjavanja. Stručna i znanstvena istraživanja košarkaške igre u Hrvatskoj posebno su se intenzivirala nakon osamostaljenja države te su danas sustavna, interdisciplinarna i relativno opsežna. Ova bibliografija je doprinos uređivanju i organiziranju informacija s ovoga područja što bi trebalo olakšati pristup bibliografskim izvorima u budućem znanstveno-istraživačkom radu. Vjerujem da će ona biti sastavni dio moga autorskog projekta cjelovitog popisivanja raznolike bibliografske građe objavljene u Hrvatskoj s temom košarkaške igre koji će biti objavljen uskoro. The motivation for writing this paper is based upon a desire to collect, evaluate, organize and publish content providing an overview of the scope, eventually being used by the field of expert and scientific community in their further works. Materials for the Bibliography of Papers in the Field of Basketball Published in Croatia by 2019 : scientific and expert articles is dealing with the mentioned content as a result of a previous research work in the field of basketball in Croatia dating back from the beginning of the systematic researches in the 1970's until 2019. The introductory chapters present a summary overview of the basics of bibliography, as well as the basics of basketball as a sport. The bibliographic list provides only categorized scientific and expert papers presented in two series: Scientific and Expert Articles in Journals and Scientific and Expert Papers in Proceedings (contenting the total of 384 bibliographic records). The records contain the basic elements of the bibliographic description, they are chronologically lined up within the year alphabetically according to the author headings. Access and search help provide three indexes: an author index, a subject index and a journal index. Bibliography sources are mostly ones of secondary nature, leaving space for further research and supplementation. Expert and scientific research of basketball in Croatia have intensified especially after the independence in the 1990's and become systematic, interdisciplinary and relatively extensive today. This bibliography is a contribution to the editing and organiziting information from this scope which should facilitate access to bibliographic sources in future scientific research work. I believe it will be an integral part of my authoring project which includes comprehensive bibliography of a various materials published in Croatia on the subject of basketball to be released shortly.

U ovom radu govori se o važnosti i prednostima otvorenog pristupa informacijama te su analizirani brojčani podaci o pohranjenim završnim radovima u digitalnim repozitorijima hrvatskih veleučilišta na Nacionalnom repozitoriju završnih i diplomskih radova ZIR. Svrha analize jest utvrditi koliko je otvoreni pristup takvim radovima zastupljen na veleučilištima te koja vrsta pristupa je najzastupljenija., In this paper, focus is on importance and advantages of open access to informations. Also, analysis of number and type of access to final papers in polytechnics digital repositories on National repository ZIR is made, with intention to determine in what amount open access is present in those digital repositories and which type of access to papers is the most used.

Jedna od najvećih zbirki Hrvatskoga školskog muzeja jest Zbirka radova učenika i nastavnika, koja danas ima preko 10 000 muzejskih predmeta. Važan dio Zbirke čini likovno stvaralaštvo naših učenika, učitelja i profesora. Prikupljeni likovni radovi najvećim su dijelom rezultat sustvaranja javnosti, učenika, učitelja, škola i djelatnika Muzeja. Još od svojega osnutka 1901. Hrvatski školski muzej sistematično i planski prikuplja građu bilo da je riječ o donacijama građana, ustanova ili raznim aktivnostima Muzeja, primjerice organiziranju likovnih natječaja na važne i popularne teme, ciljanim izložbama ili dobro osmišljenim pedagoškim akcijama. Muzej motivira svoje posjetitelje, korisnike i cjelokupnu javnost da pomognu sačuvati svakodnevicu, trenutak u kojem se živi i stvara, za buduće naraštaje. Što je rezultat takva pristupa, što se njime uspjelo prikupiti i sačuvati, prikazat će se ovim radom., One of the largest collections of the Croatian School Museum is the Collected Students’ and Teachers’ Papers, which now includes over 10 000 museum items. Artistic creations of our students, teachers and professors are an important part of the collection. Works of visual art were mostly collected through the joint efforts of the public, students, teachers, schools and Museum employees. Ever since it was established in 1901, the Croatian School Museum has systematically and dedicatedly collected different materials, including donations received from individuals and institutions, and pursued various activities, for example the organization of art contests addressing important and popular topics, dedicated exhibitions, and well-designed educational campaigns. The Museum motivates its visitors, users and the entire public to help preserve this daily life, the moment of living and creating, for future generations. This paper will present the result of such approach and what it helped collect and preserve.

U završnom radu prikazana je toplinska obrada žiga za utiskivanje oznaka na metal. Rad se sastoji od teorijskog i praktičnog dijela. U teorijskom dijelu prikazana su saznanja o podjeli i vrstama alatnih čelika, njihovoj primjeni u strojarstvu, o utjecaju kemijskog sastava i mikrostrukturi kod toplinskih obrada kaljenja i popuštanja. U praktičnom dijelu završnog rada, za izabrani materijal žiga, u proizvodnim pogonima tvrtke Sigmat d.o.o. u Slavonskom Brodu, na postojećim strojnim kapacitetima, električnoj peći i drugoj potrebnoj opremi, izvršena je priprema uzoraka i toplinska obrada. Na temelju ostvarenih rezultata nakon toplinske obrade usvojen je pravovaljani tehnološki postupak za izradu žiga., The final work presents the heat treatment of s stamp for stamping marks on metal. The work consists of a theoretical and a practical part. The theoretical part presents knowledge about the division and types of tool steels, their application in mehanical engineering, the influence of chemical composition and microstructure in heat treatment of hardening and tempering. In the practical part of the final work, for the selected trademark material, in the production facilities of Sigmat d.o.o. in Slavonski Brod, on the existing machine capacities, electric furnace and other necessary equipment, samples were prepared and heat treatment was performed. Based on the achieved results after heat treatment, a valid technological procedure for making a trademark was adopted.

Temelj su ovoga rada dokumenti iz fonda povjesničara i arhivista Emila Laszowskoga u Hrvatskom državnom arhivu. Preko njih predstavljene su pogranične prijateljske, rodbinske i kulturne veze između društvenih elita grada Metlike u Sloveniji i obližnjih hrvatskih krajeva (Brlog, Bubnjarci, Žumberak i dr.) u 18. i 19. stoljeću. Na taj način bile su povezane obitelji Fux iz Metlike, koja je više od 200 godina imala u nasljednom zakupu poštansku postaju u Metliki, obitelj Šufflay iz Brloga i druge. Pored toga, postavljeno je pitanje vjerodostojnosti grba i kronike obitelji Fux, iz čijega su opisa već kod prvoga čitanja zapažene nedosljednosti koje su upućivale na pretpostavku da je obiteljska kronika izmišljena., This article deals with the history of the Fux family from Metlika in the region Bela Krajina and the bonds between social elites of the town Metlika in Slovenia and the surrounding communities from Croatia. One part of the family history was taken from the personal papers of Emil Laszowski at the Croatian State Archives because he had a relationship with this family; the other part was taken from numerous published sources. The history of the Fux family was carefully researched by Jože Dular, a museologist, poet and fiction writer, who was the founder of the Belokranjski Museum in Metlika and its long-term director. He was married to the one of descendants of the Fux family and lived until his death in the house which was built in 1863 by Antonija Fux, born Wanka von Lenzenheim. The Fux family, who had been creating wealth for years and peaked in the 18th and 19th centuries, made their social and economic position among the social elite along the border through marriages. Thanks to the diary of Emil Laszowski, which is also preserved in his personal papers at the Croatian State Archives it was possible to describe in detail the unhappy marriage and fate of Antonija Jr., born Fux and Daniel Šufflay from the nearby Croatian mansion of Brlog.Special attention in the article is dedicated to Antonija Wanka, married Fux, and her connections with Metlika folk revivalists such as Janez Kapelle and Anton Navratil. Navratil was the founder of the town’s reading room in 1865 and in his opposition to the German influence he mobilised not only the local followers, but also the adjacent Croats, of whom it is worthy to mention the Šufflays from Brlog, the Kniewald brothers from Grič near Karlovac and the Vranitzany family from Jurovo.We have consequently established that the social elite of such a small frontier town in the second half of the 19th century was international. In addition to the local Slovenes, it was composed of descendants of Czech immigrants (Navratil, Wanka von Lenzenheim, Horaček), Italians (Parma, immigrants from Monaster near Aquileia, Capelle) and the Germans from Kočevje (Sturm, Weibl and possibly Fux). The marriages of members of the Fux family with the border elites of neighbouring Croatia (Hranilović, Šufflay, Krištof, Lorković) were negligible. Namely, the composition of the Habsburg Monarchy and the practice of its administration encouraged ethnic pluralism and frequent migration in almost all parts of it, which was the case in Metlika too.Finally, a few words are dedicated to the chronicle of the Fux family, which allegedly proves that they are of a noble origin. The transcript is in Emil Laszowski's personal papers. Laszowski received the template from members of the Fux family, with whom he was a friend, as well as a relative. Special attention was paid to avoid mistaking this fictional creation for a historical fact.Although the "nobility" of the Fux family is proven to be a forgery, the question remains how this large family did not receive it at a time when families of clerks and soldiers received the nobility very easily, and the rich simply bought it. A sufficient reason for "merit and loyalty" to the emperor would be the long-term hereditary lease of an important post office in Metlika, which sent mail from Karlovac, one of the most important strategic strongholds of the Habsburg Monarchy, further to Ljubljana, Graz and Vienna.

U radu je prikazano što se i kako o Prvome svjetskom ratu pisalo u Krčkom zborniku kao časopisu Povijesnog društva otoka Krka. Krčki zbornik od prvoga objavljenog sveska 1970. godine pa do danas predstavlja njegovu okosnicu i prepoznatljivost djelovanja Povijesnog društva otoka Krka. Na temelju toga korpusa (sv. 1-69/1970-2013) prikazano je stanje istraženosti tema iz razdoblja Prvoga svjetskog rata vezanih uz otok Krk i Krčane te ukazano na neke buduće zadatke i projekte., One of the most crucial events in 20th century history – the First World War (1914-1918) – certainly had numerous repercussions and left more or less visible traces on the lives of the people and development on the largest Adriatic island – Krk. Even though one may have the impression that this era has been thoroughly analysed and evaluated in the historiographic sense, we may be unpleasantly surprised when seeking out the relevant literature on this topic. In fact, with regard to the island of Krk, all that one may find is limited to a few works and shorter nonscholarly articles, as well as the unavoidable and foundational book for a general understanding of Krk’s history: the book Otok Krk kroz vjekove [The Island of Krk Over the Centuries] by Mihovil Bolonić and Ivan Žic-Rokov (1977), which now has cult status. So this paper presents what was written about and how the First World War was covered in Krčki zbornik [Krk Almanac], the sole specialized scholarly / professional periodical on the island of Krk that covers various fields of scholarship, but with a primary focus on humanities and the social sciences. As the journal of the Krk Historical Society – which was established in 1969 with the fundamental aim of advancing scholarly research in the fields of history and other disciplines and their popularization, improvement of educational instruction, development of museum and conservation activities, ethnography and folklore, and development of historical and other institutions on the island and beyond, as well as collaboration with other institutions, etc. – Krčki zbornik, from its first volume published in 1970 under the editor Petar Strčić through the 68 printed volumes that followed (with two forthcoming), has served as the Society’s backbone and made it recognizable. Based on this body of work (vols. 1-69 / 1970-2013), this paper shows the extent of research into the First World War era tied to the island of Krk and Krk’s residents and points to certain future priorities and projects (systematic archival research, publication of valuable source materials, analytical articles, syntheses – Otok Krk i Prvi svjetski rat [The Island of Krk and the First World War] etc.).

U okviru izlaganja autori su objasnili važnost autorskopravnih pitanja i korištenja otvorenih licencija u ostvarivanju otvorenog pristupa i otvorene znanosti. Razmotrena su pitanja koja se odnose na različite vrste publikacija, različite verzije radova koje nastaju tijekom procesa objavljivanja, politike izdavača, i uloge različitih dionika (autora, knjižničara, urednika repozitorija). Prikazane su promjene koje u znanstveno izdavaštvo donosi Plan S. Predložena su moguća rješenja za samoarhiviranje koja su na raspolaganju hrvatskim autorima., Funding: National Initiatives for Open Science in Europe (NI4OS-Europe) & OpenAIRE Advancing Open Scholarship (OpenAIRE-Advance).

U ovom radu napravljena je web aplikacija za praćenje nogometnog natjecanja. Rad se sastoji od nekoliko dijelova. U prvom dijelu su analizirane dvije aplikacije koje se bave istom domenom. Njihovom analizom definirane su osnovne funkcionalnosti koje su implementirane i u ovom radu. Nakon toga, definirani su svi zahtjevi koje aplikacija mora ostvariti, te su oni raspoređeni u funkcionalne i nefunkcionalne zahtjeve. Nakon toga opisana je baza podataka te arhitektura sustava koju čine kontroleri, pogledi i modeli. Nadalje, opisane su upute za korištenje aplikacije i sve njene funkcionalnosti. Poslije toga, opisane su sve tehnologije i alati koji su korišteni u izradi ove web aplikacije. Na kraju su dodani zaključak u kojem se opisuju moguće nadogradnje aplikacije i literatura. In this paper, a web application for tracking a football competition was developed. The paper consists of several parts. In the first part, two applications dealing with the same domain were analyzed. Based on their analysis, the basic functionalities were defined and implemented in this work. After that, all the requirements that the application must fulfill were defined, and they were categorized into functional and non-functional requirements. Following that, the database and system architecture, which includes controllers, views, and models, were described. Furthermore, instructions for using the application and all its functionalities were provided. Afterwards, all the technologies and tools used in the development of this web application were described. Finally, a conclusion was added, which describes possible upgrades for the application and references.

Fotografije čiji se vizualni sadržaj veže uz Domovinski rat u raspravu uvode odabrana djela nastala u vrijeme rata, ali i nakon sukoba i razaranja, ukazujući na interes umjetnika za njihove posljedice, popraćene složenim procesima sjećanja i pamćenja. Nerijetko se smatra da je fotografija u samo ratno vrijeme u najvećem broju slučajeva korištena kao dokaz ili kao propaganda. Za razliku od dokumentarne i reportažne fotografije, umjetnički radovi o kojima je riječ ukazuju na prekide povijesnog kontinuiteta, interpretirajući traumatične događaje i promišljajući njihova značenja. Osim što se djela referiraju na same događaje, razmatraju se i pitanja povezana s objektivnošću, sudioništvom i odgovornošću fotografa, korištenjem fotografije u prostoru javnosti i konceptualizacijom rata kroz postupke kojima umjetnici preispituju situacije u kojima su se zatekli. U strukturi njihove umjetničke prakse nailazi se na strukture svojevrsnih arhiva unutar kojih „pohranjuju” svoja vizualna i druga saznanja, kao i na specifičan odnos prema krajoliku, koji se razmatra u kontekstu recentnoga teorijskog pisanja o mjestima opterećenima traumom., Photographs related to the Homeland War in Croatia were partly taken during the conflict (1991–1995), and partly in the aftermath of the destruction and suffering, when artists recorded their consequences and used visual content to discuss the complex processes of memory and remembrance. While photographs taken during the war are often considered to be evidence, but also propaganda, and most of them are characterized by documentary and reportage approach, this paper singles out several artistic series that interpret traumatic events and reflect on their meaning through creative processes of conceptualization, as well as those that are reminiscent of archival structures and specific ways of storing visual and other types of knowledge. In addition, attention is paid to the topic of landscape, which recent photographic practice, but also theoretical writing often associate with trauma. In writing on photography in Croatia, image of the Homeland War are mainly reduced to a reportage approach that is made available through print and electronic media. Still, the introduction of the theme of trauma into artistic discourse has revealed a need for using (and, consequently, creating) a kind of structure that would make it possible to record the suffering of others by more or less methodical visual means. The freely understood notion of archives, as well as landscape that is primarily understood as a contemplative and only secondly a geological formation, have been used in the context of intimate, non-institutional “storages of objects” and layers of memory and history, whereby their introduction into the common context counts on individual artistic approaches and unpredictable meanings that arise from them. Three series were created during the war: Darko Bavoljak came across the ruined remains of the company Budućnost that operated in Eastern Slavonia, and focused on a specific typography that unequivocally points to the time of the company's founding and the political context that is recognized and inscribed through it. The series by Pavo Urban, created on the 6th December 1991, owes its iconic status primarily to the fact that the young artist died while filming it, while capturing the threatening, melancholic atmosphere of the environment he came from. Almost at the same time, Antun Maračić created his series Ne-grad i njegov subrealizam [Non-City and its Subrealism]. We interpret it along the lines of documentarism, while the very title of the series and the specific atmosphere of nothingness emphasize the conceptualized fragmentariness and the feeling of nausea, prompted by the endangerment of life and the nullification of urban characteristics of the place where the photographs were taken. Younger generations who did not directly witness war-time devastations approach this topic with a different motivation, such as Bojan Mrđenović who also photographed the remains of the Budućnost company in Eastern Slavonia. He sees them primarily as metaphors of conflict and a general attitude toward the legacy of socialism and the ways in which, thanks to architectural modernism, this ideological system marked almost all urban and rural places, a sign that the transition period of the 1990s completely ignored. The thesis on the posteriority of photography is concluded by reflecting on artworks by Sandra Vitaljić from the Neplodna tla [Infertile Grounds] series, which was created not only at the sites of conflicts from the Homeland War, but also at the sites of mass crimes from the Second World War. This series is characterised by practices that are similar to archiving, as well as by a personal experience of walking in nature whereby traumatic memories are reactivated through the visualisation of the landscape, while its complex research structure includes considerations on the correspondence of history and memory and other topics. By widening the discussion to include photographs of the Homeland War, whether they were taken during the War (Bavoljak, Urban, Maračić) or were the result of research and interpretation of traumatic events in a broader historical—and thus also political and other contexts (Mrđenović, Vitaljić) - we encounter different levels and sources of trauma. Selected photographs convey the inexplicable—a source of personal and collective pain that cannot be unambiguously understood and interpreted.

Prikaz zbornika znanstvenog skupa.

U radu je prikazana izvedba papirnatog galvanskog članka prikladnog za uporabu u papirnatim mikrofluidičkim analitičkim napravama. Izrađeni galvanski članak sastojao se od grafitne katode izrađene crtanjem po papiru mekom grafitnom olovkom i aluminijske anode izrađene od samoljepljive aluminijske folije. Rad članka temeljio se na oksidaciji aluminijske anode i redukciji ABTS radikala, in situ generiranog u članku, oksidacijom ABTS-a s vodikovim peroksidom u prisutnosti željezova(II) ftalocijanina kao katalizatora. Sve komponente potrebne za rad konstruiranog galvanskog članka, uključujući i vodikov peroksid u formi urea peroksida, unaprijed su pohranjene u članku u obliku krutina pa je za pokretanje članka dovoljno u njega dodati mali volumen vode. Pri optimalnim uvjetima, konstruirani galvanski članak u stanju je davati struju od približno 0,1 mA, uz napon od 1 V, tijekom perioda od otprilike 30 minuta, što ga čini prikladnim za napajanje potencijalnih papirnatih mikrofluidičkih analitičkih naprava s integriranim elektroničkim sklopovima za obradu signala i prikaz rezultata mjerenja. In this work, a paper-based galvanic cell suitable for application in microfluidic paper-based analytical devices is described. The galvanic cell comprises of a graphite cathode fabricated by drawing on the paper with a soft graphite pencil and an aluminium anode, fabricated from self-adhesive aluminium foil. Operational mode of the cell was based on the oxidation of the aluminium anode and the reduction of the ABTS radical, generated in situ, inside the cell, by oxidizing ABTS with hydrogen peroxide in the presence of iron(II) phthalocyanine as a catalyst. All of the components required for the operation of the constructed galvanic cell, including hydrogen peroxide in the form of urea peroxide, were stored in advance inside the cell in the form of powdered solid, so the operation of the galvanic cell can be initiated simply by adding a small volume of water into the cell. Under optimal conditions, the constructed galvanic cell produced an electric current of approximately 0.1 mA and a voltage of 1 V, during a period of around 30 minutes, which makes it suitable for powering of microfluidic paper-based analytical devices with integrated electronic circuits for signal processing and displaying measurement results.

Termokromne boje su materijal čija je uporaba u porastu, a glavne komponente često su im pseudoestrogeni bisfenol A i benzofenon. Za identifikaciju i kvantifikaciju ovih spojeva u termokromnim bojama razvijena je tekućinskokromatografska metoda obrnutih faza s UV-detekcijom. Tri od analiziranih petnaest uzoraka boja sadržavali su bisfenol A s masenim udjelima oko 2 %, a dva uzorka benzofenon s masenim udjelima od 0,34 % i 0,66 %. Termokromna boja koja sadrži bisfenol A i koju je moguće tiskati u laboratorijskim uvjetima otisnuta je na različite vrste papira. Razvijena je tekućinskokromatografska metoda za određivanje bisfenola A u termokromnim otiscima na papiru ekstrakcijom metanolom. Maseni udio bisfenola A u papirima bio je od 0,126 mg g‒1 do 0,778 mg g‒1. Otisci termokromne boje koja sadrži bisfenol A podvrgnuti su anaerobnoj razgradnji u tlu čime su simulirani uvjeti razgradnje na deponiju otpada. Razvijena je tekućinskokromatografska metoda s UV-detekcijom kojom je određen maseni udio bisfenola A u tlu u vremenu od 14 do 150 dana razgradnje papira i procijenjena brzina njegova raspada. Tijekom anaerobne ragradnje maseni udio bisfenola A u termokromnim papirima smanjio se do vrijednosti bliske granici određivanja metode od 0,0025 mg g‒1. Maseni udio bisfenola A u tlu tijekom anaerobne razgradnje se povećavao i nakon 150 dana razgradnje bio je od 3,21 ng g‒1 do 35,1 ng g‒1. Thermochromic inks, materials increasingly used, may contain pseudo-estrogens bisphenol A and benzophenone as main ingredients. To identify and quantify these compounds, reversed-phase liquid chromatographic method with UV-detection was developed. Three out of 15 analyzed samples contained bisphenol A in mass fractions of about 2 %. Two samples contained benzophenone with mass fractions of 0,34 % and 0,66 %. Thermochromic ink that contains bisphenol A and was applicable in laboratory conditions was printed on various types of papers. Liquid chromatographic method for determination of bisphenol A extracted in methanol was developed. Mass fraction of bisphenol A in papers was from 0,126 mg g–1 to 0,788 mg g–1. Prints of thermochromic ink containing bisphenol A were subjected to anaerobic degradation in soil to simulate the conditions at a landfill site. Reversed-phase liquid chromatographic method with UV-detection was developed to determine mass fraction of bisphenol A in soil at time intervals from 14 to 150 days, and the rate of its degradation was estimated. During the anaerobic degradation, mass fraction of bisphenol A in papers decreased to value close to detection limit of the method of 0,0025 mg g–1. Mass fraction of bisphenol A in soil increased during the anaerobic degradation, and after 150 days ranged from 3,21 ng g–1 to 35,1 ng g–1.

Unutar teorijske razradbe koncepta funkcionalnih stilova standardnoga jezika u okrilju je praškoga strukturalizma naznačena posebnost književnoumjetničkoga stila u odnosu na ostale funkcije standarda zbog njegove potpune jezične slobode jer se piščev izbor ostvaruje slobodnim odabirom kao i kovanjem jezičnih jedinica u prostoru književne imaginacije. Rad analizira kako se ta implicirana dvostrukost odražava u suvremenoj jezikoslovnoj kroatistici, gdje se sučeljavaju oni pristupi koji ističu posebnost književnoumjetničkoga stila unutar peteročlane funkcionalnostilističke razdjelbe (stoga se taj stil naziva jezikom sui generis) i oni malobrojniji koji naglašavaju potrebu zadržavanja imenovanja književnoumjetničkoga stila funkcijom standarda.

Predškolsko dijete nalazi se u različitim kontekstima s kojima je u izravnom ili neizravnom odnosu. Ono raste i razvija se, živi i uči u najvećoj mjeri u obiteljskom okruženju, a dio djece uz obitelj i u predškolskoj ustanovi (1). Pritom treba naglasiti da odgoj u predškolskim institucijama ne služi kao zamjena za obiteljski odgoj, već ga samo nadopunjuje. Iz toga možemo zaključiti da su obitelj i predškolska ustanova u relacijskom, komplementarnom odnosu - djeluju jedno na drugo i mijenjaju se pod uzajamnim utjecajima (2). Predškolska je ustanova specifičan kontekst koji treba zadovoljiti sve razvojne i individualne potrebe djece i poticati njihov tjelesni, socijalni, emocionalni i kognitivni razvoj (1). S obzirom na ovaj široki raspon djetetova djelovanja uvjetovanih razvojnim potrebama i učenjem predškolska ustanova trebala bi sačinjavati probranu, kvalitetnu, fleksibilnu, privlačnu, demokratsku, ugodnu, humaniziranu i otvorenu sredinu (3). Predškolska ustanova dakle nije nešto u što se dijete jednostavno stavi, kao primjerice u dobro opremljeni prostor u vremenu dok su roditelji na poslu, nego predstavlja tijek ukupnih zbivanja koji djeluju na dijete i u kojima i ono samo aktivno sudjeluje (3). Ovaj istraživački rad ima za cilj ispitati stavove studenata redovnog i izvanrednog preddiplomskog studija Sestrinstva o uključivanju djece u predškolske ustanove. Istraživanje je provedeno online i sudjelovalo je 92 ispitanika. Svrha je također bila i potaknuti studente da osvijeste svoje vlastite stavove o temi s kojom će se susresti na poslovnom planu prilikom provedbe organizacije rada u radnom okruženju u kojem se nađu, ali i osobno. Za potrebe ovog istraživanja korišten je prilagođeni upitnik koji propituje stavove studenata. Dobiveni rezultati u statističkoj obradi se uspoređuju i zaključujemo da ne postoji statistička razlika koja bi značajno ukazivala na razliku u stavovima u ispitivanim skupinama., A preschool child finds himself in different contexts with which he is in direct or indirect relationship. It grows and develops, lives and learns to the greatest extent in a family environment, and part of the children live with the family and in a preschool institution (1). At the same time, it should be emphasized that education in preschool institutions does not serve as a substitute for family education, but only complements it. From this we can conclude that the family and the preschool institution are in a relational, complementary relationship - they act on each other and change under mutual influences (2). Preschool is a specific context that should meet all developmental and individual needs of children and encourage their physical, social, emotional and cognitive development (1). In view of this wide range of child's activities conditioned by developmental needs and learning, preschool institutions should create a well-chosen, high-quality, flexible, attractive, democratic, pleasant, humanized and open environment (3). Preschool is therefore not something in which a child is simply placed, such as in a well-equipped space while the parents are at work, but rather represents the course of overall events that affect the child and in which he or she actively participates (3). The purpose of this research paper is to examine the attitudes of full-time and part-time undergraduate Nursing students regarding the inclusion of children in preschool institutions. The survey was conducted online, and 92 respondents participated. The purpose was also to encourage students to become aware of their own views on the topic that they will encounter on a business level when implementing the organization of work in the work environment in which they find themselves, as well as personally. For the purposes of this research, a customized questionnaire was used that questions the attitudes of students. The results obtained in the statistical processing are compared and we conclude that there is no statistical difference that would significantly indicate a difference in the attitudes of the examined groups.

Zahvaljujući današnjim brojnim tehnološkim dostignućima, fokus istraživanja (bio)kemijskih senzora usmjeren je prema realizaciji nosivih analitičkih uređaja. Nosivi (bio)kemijski senzori su alati koji omogućavaju kontinuiranu i neinvazivnu analizu sadržaja bioloških fluida (npr. znoj, suze, slina, međustanična kapljevina ili dah) kao i detekciju određenih supstanci u okolišu nositelja senzora. Optički (bio)kemijski senzori su vrsta (bio)kemijskih senzora pomoću kojih se dolazi do željene informacije pomoću interakcije s elektromagnetskim zračenjem. U literaturi se često spominju pod ključnom riječi „optode“, zbog velike sličnosti s njihovim elektrokemijskim ekvivalentima-elektrodama. Problemi kao što su odabir pogodnih materijala, izvor napajanja te vjerodostojnost prikupljenih podataka za analizu glavni su razlog komercijalne nedostupnosti nosivih kemijskih senzora. U zadnje vrijeme, sve je veći interes za korištenjem papira i tekstila kao supstratnih materijala. Dostupnost, pristupačnosti te niska cijena papira sasvim su opravdani razlozi za odabir takvog supstrata. S druge strane, tekstilni senzori su s praktičnog stajališta najinteresantniji kako bi se već nalazili integrirani u odjevnim predmetima. Cilj ovog rada bio je ispitati dobro utvrđeni mehanizam ion-selektivnih optoda na različitim supstratima. Pripravljeni su senzori za kalij na bazi valinomicina i lipofiliziranog Nile Blue indikatorskog bojila, te je provedena njihova analitička karakterizacija s potencijalnom primjenom u analizi sadržaja znoja. U okviru ovog istraživanja, kromatografski papir se pokazao kao najbolji supstrat. Eksperimentalni rezultati ispitivanja optoda na kromatografskom papiru su pokazali da dinamičko područje obuhvaća preko tri reda veličine (10^-1 M - 10^-4 M K+) koje je zadovoljavajuće za praktičnu primjenu s obzirom na činjenicu da se prosječna koncentracija kalijevih iona u znoju nalazi upravo u tom intervalu. Treba naglasiti da je upotrebljivost ovih senzora limitirana zbog poznatog problema s ispiranjem osjetilnih komponenti senzora što pokazuju rezultati karakterizacije; obnovljivost, ponovljivost i stabilnost. Ovako pripravljene papirne kalij-selektivne optode bi se mogle koristiti za predviđenu aplikaciju u obliku jednokratnih test-traka. Numerous advancements in today’s technology had impact on research of (bio)chemical sensors. Focus has been shifted towards realization of wearable analytical devices. Wearable (bio)chemical sensors are analytical tools that provide the opportunity for continuous and non-invasive analysis of body fluid content (such as sweat, tears, saliva, interstitial fluid or breath), as well as the ability to detect substances in the environment of their user. Optical (bio)chemical sensors represent the subclass of (bio)chemical sensors where interaction with electromagnetic radiation is employed in order to extract useful information. They are most commonly named “optodes” in the literature, due to great similarity with their electrochemical equivalents-electrodes. Certain problems such as choosing appropriate materials, external power sources and credibility of harvested data still represent the challenge that needs to be resolved in order to start commercial production of wearable (bio)chemical sensors. A growing interest in using paper and textile as substrate materials has been observed. Availability and affordability of low-cost paper are main reasons to choose this material. On the other hand, textile-based sensors would be most practical due to simple integration with existing clothing material. The ultimate goal of this thesis was to investigate the mechanism of ion-selective optodes on different substrates. Potassium-selective optodes based on valinomycin carrier and lipophilized Nile Blue indicator dye were fabricated with potential application in analyzing the sweat content. Fabrication of sensors was followed with their analytical characterization. Experimental results have shown that chromatography grade paper seems to be the most appropriate substrate material, considering the investigated mechanism. Such paper-based optodes were characterized in greater detail, exhibiting dynamic range that covers over three orders of magnitude (10^-1 M - 10^-4 M K+), making them suitable for predicted application. Average potassium concentration in human sweat lies within that range. It should be emphasized that the usability of these sensors is limited owing to the well-known leaching problem, where sensing components are being washed out of the system. Characterization parameters such as repeatability, reproducibility and stability have clarified that apparent problem. Paper-based potassium-selective optodes investigated in this research could therefore be used for predicted application as single-use, disposable paper strips.

Papirnati mikrofluidički senzori predstavljaju inovativnu tehnologiju za manipulaciju malih volumena uzoraka i detekciju razičitih vrsta analta. Cilj je takve tehnologije pružiti jeftine, bio-razgradive, lako prenosive uređaje, neovisne o skupoj instrumentaciji, a kojma će moći rukovati i needucirano osoblje. Cilj je ovog rada staviti papirnate mikrofluidičke senzore u širi kontekst mikrofluidičkih uređaja, dati pregled prednosti i mana takve tehnologije, opisati najčešće korištene metode izrade papirnatih mikrofluidičkih uređaja kao i metode detekcije analita. Velik je dio rada posvećen bitnoj skupini takvih senzora, papirnatim mikrofluidičkim biosenzorima te njihovoj podskupini, papirnatim mikrofluidičkim enzimskim biosenzorima. Rad također obrađuje područja primjene te nove tehnologije i zapreke koje bi ona trebala prevladati kako bi iz laboratorija prešla u komercijalnu upotrebu. Paper based microfluidic sensors represent an innovative technology for handling small volumes of samples and analysis of different types of analytes. The goal of this technology is to provide devices that are inexpensive, biodegradable, portable, independent of expensive equipment and that can be handled by untrained personnel. The aim of this thesis is to place paper microfluidic sensors in the wider context of microfluidic devices, discuss their advantages and disadvantages, describe the methods for their production as well as the methods for analyte detection. A considerable part of the thesis is dedicated to an important group of such sensors, paper microfluidic biosensors and their subgroup, paper microfluidic enzyme biosensors. The thesis also focuses on highlighting new technologies in the field of paper microfluidics as well as on the obstacles this technology needs to surpass in order to step out of the laboratory and becomes widely used.

Wireless chemical sensors are increasingly finding use as analytical devices in healthcare diagnostics, wearable sensing (sweat analysis) and in the rapidly emerging area of the Sensor Internet of Things (SIoT). In such wireless scenarios, the application of fluorescence-based sensors is lagging behind other types of transduction mechanisms. In this work a new low-cost and highly portable wireless fluorimeter for optical chemical fluorescence intensity measurements is presented (bill-of-materials approximately €20). The fluorimeter is programmed and communicates wirelessly with mobile devices or personal computers by radio-frequency identification (RFID) or near-field communication (NFC). This novel mobile analytical system is highly adaptable for use with different fluorescent sensor chemistries and analytes. The fluorimeter has been evaluated in the laboratory in two sets of proof-of-concept experiments: firstly fluorimetry in solution, where the fluorescence intensities of fluorescein were recorded, and secondly chloride sensing via a paper-immobilised quinine sulphate fluorescent indicator. The latter represents the first demonstration of wireless (radio-frequency) fluorescence-based chloride sensing. Satisfactory analytical performance was achieved in the entire range of sweat chloride concentrations. The wireless fluorimeter system presented here could make a significant contribution to several emerging areas of mobile chemical sensor research, including wearable sensors for healthcare and sport, mobile point-of-sample diagnostics as well as more generally for the Sensor Internet of Things.

Danas se u svijetu proizvede oko 400 milijuna tona papira što jasno implicira na važnost ove grane industrije u globalnoj ekonomiji. U radu su opisani osnovni sirovi materijali i načini obrade papira, povijesni razvoj tvornice za proizvodnju papira u Belišću, proces proizvodnje te automatizacija samog procesa. Kako bi se osigurala kontinuirana proizvodnja, pogoni za proizvodnju papira se automatiziraju te se tako uz pomoć softverskog sistema olakšava rukovođenje i praćenje proizvodnje.Vodeći proizvođači papira nastoje novim tehnologijama poput novih natoka, uštedjeti energiju te poboljšati kvalitetu proizvoda. Energija biomase te razvoj recikliranih vlakana i proizvoda samo su neki od načina na koje proizvođači žele smanjiti loš utjecaj na okoliš te podizati ekološku osviještenost kod ostalih proizvođača, odnosno pogona. Nowdays, around 400 million tonnes of paper are produced in the world, which clearly implies the importance of this industry branch in the global economy. The paper describes the basic raw materials and methods of paper processing, the historical development of the paper production plant in Belišće, the process of production and the automation of the process itself.In order to ensure continuous production, paper production plants are automated and thus, with the help of the software system, it facilitates the management and monitoring of production.Leading paper manufacturers strive for new technologies such as new headbox to save energy and improve product quality.Biomass energy and the development of recycled fibers and products are just some of the ways manufacturers want to reduce their environmental impact and raise ecological awareness among other manufacturers or plants.

Pomorske karte su jedno od najvažnijih navigacijskih pomagala. Izrada papirnatih pomorskih karata temelji se na preporukama koje sadržavaju tehničke i upravne smjernice Međunarodne hidrografske organizacije. Hidrografski uredi u svijetu općenito nastoje standardizirati svoje pomorske karte i navigacijske publikacije prema standardima Međunarodne hidrografske organizacije, te osigurati točnost i pouzdanost prikazanih informacija. Međunarodna hidrografska organizacija vodi računa o standardizaciji generalnih elemenata kao što su veličina i oblik slova, jezik, standardizacija boja, pa sve do detaljnih prikaza hidrografskih i topografskih simbola i međunarodnih kratica. U radu se posebno analizira primjena standarda S-4 i publikacije INT-1. Navigational charts are one of the most important navigational aids. Construction of navigational paper charts is based on the recommendations containing technical and administrative guidance issued by the International Hydrographic Organization. Hydrographic offices worldwide tend to standardize their navigational charts and navigational publications in accordance with International Hydrographic Organization recommendations and ensure the accuracy and reliability of the information displayed. The International Hydrographic organization takes care of the standardization of general elements such as size and shape of letters, language, color standardization, up to detailed views of hydrographic and topographic symbols and international abbreviations. The paper analyzes in particular the application of S- 4 standard and INT-1 publication.

U radu je po prvi puta na papirnatoj mikrofluidičkoj platformi iskušana biamperometrijska detekcija analita, pri čemu je mikrofluidička platforma posebno prilagođena mjerenju u uvjetima konstantnog protoka elektrolita. Kao modelni analit odabran je sulfit, kao relativno čest alergen, ali i prototip nizu analita koji se mogu prevesti u plinovito stanje (npr. NH₄⁺/NH₃, CO₃²⁻/HCO₃⁻/CO₂, S²⁻/HS⁻/H₂S...) i difuzijom izdvojiti iz kompleksne matrice uzorka te zbog toga vrlo selektivno detektirati i kvantificirati. Na temelju rezultata dobivenih testiranjem konstruiranog papirnatog mikrofluidičkog senzora postavljene su smjernice za daljnji razvoj i usavršavanje testirane mikrofluidičke platforme. Zaključeno je da je u daljnjem razvoju senzora potrebno riješiti probleme vezane uz promjenjivu osnovnu struju i poboljšati reproducibilnost mjerenja unaprjeđivanjem dizajna senzora i omogućavanjem provedbe mjerenja metodom standardnog dodatka. For the first time, biamperometric analytical detection was tested in the paper microfluidic platform, which is specifically adapted for measurement under conditions of constant electrolyte flow. As a model analyte are selected sulphides, as a relatively common allegen, but also as a prototype series of volatile analytes that can be converted into gas (ex. NH₄⁺/NH₃, CO₃²⁻/HCO₃⁻/CO₂, S²⁻/HS⁻/H₂S...), diffuse and separate from the complex sample matrix and therefore highly selectively be detected and quantified. Based on the results obtained by testing the constructed paper microfluidic sensor, guidelines for further development and improvement of the tested microfluidic platform were laid down. It was concluded that in the further development of the sensor, problems related to variable primary current need to be solved and reproducibility of measurements improved by enhancing the design of the sensor and enabling the measurement to be carried out using the standard plug-in method.

U ovom radu istraživana je uspješnost primjene metode gama zračenja u svrhu dekontaminacije i očuvanja djela kulturne baštine. Zbog široke rasprostranjenosti gljivica, sva su djela izložena opasnosti degradacije, koja može biti izbjegnuta ukoliko se vodi pravovaljana skrb o artefaktima i tako onemogući rast biokontaminanata. Ispitana je i prirodna kontaminacija samog materijala, te se nakon vizualne identifikacije kolonija mikroskopom, pristupilo zračenju uzoraka. Uzorci su bili podijeljeni u dvije skupine. Jedna skupina je prije zračenja bila inkubirana u vlažnim (Rv=70-80%, t=25°C), a druga u suhim uvjetima (t=25°C). Obje skupine uzoraka zračene su dozama zračenja od 2, 7, 20 i 50 kGy u dvije brzine, 0,1 Gy/s i 9,8 Gy/s. Djelotvornost metode pratili smo porastom kolonija 0.,7.,14. i 28. dana, nakon izlaganja uzorka zračenju. Dobiveni rezultati eksperimenata pokazuju da su prirodni kontaminanti neosjetljivi na primijenjeno zračenje, jer je porast kolonija zabilježen kod uzoraka zračenim visokim dozama, koje su nekoliko puta veće od doza koje se koriste za dekontaminaciju umjetnina. Uočen je porast i drugih vrsta gljivica. Točkasta kontaminacija papira, otežava izvođenje konačnog zaključka o učinkovitosti fungicidnog/fungistatskog djelovanja gama zračenja. This paper analyzes the use and effectiveness of gamma radiation, in order to decontaminate and protect cultural heritage. Fungi are widely spread in the environment, ergo they pose the risk to many works of art, and biodegradation is inevitable, unless the proper care is taken of these artefacts. Also, the natural contamination of the material has been analyzed, colonies were identified microscopically, following gamma radiation of the samples. Samples were divided into two groups. One group was exposed to the conditions of elevated humidity (Rw=70-80%, t=25°C), and the other group did not undergo any treatment, those samples remained in dry conditions. Both groups were irradiated with subsequent radiation doses 2,7,20 and 50 kGy, which were administered with two different velocities of 0,1Gy/s and 9,8 Gy/s. The effectiveness of the method was evaluated in correspondence with colony growth after the certain time, i.e. 0th, 7th, 14th and 28th day after irradiation has taken the place. Natural contaminants have shown radio resistance due to given results, because there has been noticed colony growth in samples, which were treated with a high dose of radiation. The dose of the matter is several times higher than dose, which is usually used for decontamination purpose. Growth of other fungal species has been noticed too. Due to dot contamination, it is very difficult to conclude how effective fungicide gamma radiation actually is.