Search

In this study, the focus is on the reduction of channel attenuation through diversity techniques. The effectiveness of the diversity system was evaluated based on its ability to lower the carrier noise ratio (CNR) and carrier-to-interference ratio (CIR) at a specific probability of error (Pe). The analysis concentrated on statistically reducing the fading dynamic range of the average CNR and CIR. The aim was to examine two branches (N=2) of diversity systems that employed pre-detection combining, a highly advantageous and effective method in radio mobile communications. The initial phase of the research involved investigating the statistical properties of CNR and CIR without diversity using a Rayleigh fading model. Diversity was then introduced into the experiment. Maximal ratio (MRC) combining, Equal gain (EGC) combining and Selection (SC) combining were simulated and compared. The results showed that the use of diversity techniques significantly reduced the fading dynamic range of the instantaneous CNR γ compared to the instantaneous CIR λ of about 10-3dB Furthermore, maximal-ratio combining (MRC) demonstrated the highest level of performance improvement compared to other methods. [ABSTRACT FROM AUTHOR]

Objectives: During the early COVID-19 pandemic, college students had to switch to an online learning and online communication environment facing the chances of information overload, misinformation or conflicting information about COVID-19. This study aims to assess the communication needs that have arisen among college students to shed light on the development of a health communication campaign tailored toward college students. Methods: A series of 10 focus group discussions were conducted with 38 total participants. Each group has 2-6 undergraduate or graduate student participants. Nvivo was used to analyze the transcripts. Results: The students reported that they received conflicting information or misinformation. They requested messages with language that was easy to understand with infographics while being culturally appropriate. They advocated for regular and concise email updates from campus leadership. Most participants also preferred COVID-19 control and prevention information on social media. Conclusion: This study revealed the current status and the needs for health information about COVID-19 prevention and control among college students. [ABSTRACT FROM AUTHOR]

Thin-walled channel beams such as cold-formed steel purlins are primarily used to withstand wind forces in the roofing and walling systems of buildings. Traditionally, these types of members are usually designed for bending moments, with the effects of torsion ignored. However, the loading on thin-walled channels can be much more complicated than simple bending actions. Because of the position of the shear centre outside the section, channels can undergo bending and torsion when subjected to vertical load on the top flange. The applied torsion may cause significant stresses in the channel, which may need to be accounted for in design. There appears to be no research on quantifying the effects of torsion on thin-walled channels subjected to a uniformly distributed load acting on the top flange. In this paper, a theoretical solution is derived for calculating the longitudinal stresses in thin-walled channels subjected to torsion caused by a uniformly distributed load acting on the top flange. The theory is validated by modelling the channels in a finite-element analysis. The theoretical results include calculations of the twist rotation, bimoment, sectorial coordinate and longitudinal stresses, while the results from the finite-element analysis include the twist rotation and longitudinal stresses. The results show that the longitudinal stresses caused by torsion can significantly exceed those caused by the bending moment. Practical advice is also given for engineers on how to minimize torsion in cold-formed steel purlins. [ABSTRACT FROM AUTHOR]

Copyright of Cybernetics & Systems Analysis / Kibernetiki i Sistemnyj Analiz is the property of V.M. Glushkov Institute of Cybernetics of NAS of Ukraine and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In recent years, there has been a compelling need to adopt cold‐formed ultra‐high‐strength steel (CFUSS) in the construction industry owing to its numerous advantages, such as a higher strength‐to‐weight ratio, flexibility in achieving desired shapes, and adaptability over longer spans. Among the various applications, CFUSS lipped channel sections are commonly used as purlins and joists in steel structural systems. However, these sections are susceptible to different failure modes, particularly web crippling, which presents significant challenges. Currently, the current design rules lack specific guidelines for estimating the web crippling capacity of CFUSS sections. To address this crucial gap, the present study focuses on a comprehensive numerical investigation of the web crippling response of CFUSS lipped channel sections under interior‐two‐flange (ITF) loading conditions. Finite element (FE) models were developed using the ABAQUS package, verified against published test data, and subsequently used in an extensive parametric study. The ultimate web crippling capacity obtained from the parametric study was used to evaluate the accuracy of the current design equations in various design standards. The findings revealed that the existing design equations inadequately predicted the ultimate web crippling capacity of CFUSS lipped channel sections subjected to the ITF loading condition. Consequently, a modified design equation is proposed, utilizing the same approach as the current design standards, and a new direct strength method (DSM) approach is developed and verified through reliability analysis. The proposed modified design equations offer promising solutions to ensure safer and more reliable design practices for CFUSS structures in the construction industry. [ABSTRACT FROM AUTHOR]

Sewage pipes are important conduits for microplastics into the natural environment, but previous studies have paid little attention to the hydraulic characteristics of the confluence of pipe and channel, and the distribution of microplastics at the confluence. This study compared the effects of varying flow rates and particle sizes (Including 500 μm, 700 μm, and 900 μm) on microplastic migration and distribution at the confluence of pipe and channel using experimental measurements. The results obtained using flotation method indicate that flow proportions and particle sizes influence the capacity of flow to transport microplastics. Larger microplastic accumulation occurs in scour holes and separation zones characterized by lower flow velocities, while deposition decreases in acceleration zones characterized by higher flow velocities. Increasing the flow rate of the branch pipe influences the volume of each zone at the pipe-channel confluence. The elongated shape of the scour hole and the acceleration zone facilitate the downstream migration of microplastics. Moreover, the hydrophilic nature of microplastics increases after aging, and it is more likely to migrate to downstream with the water flow, making the downstream microplastics account for more proportion. These results provide valuable insights into the migration and distribution of microplastics at the confluence of pipe and channel, with practical implications for microplastic treatment strategies at these confluences. [ABSTRACT FROM AUTHOR]

In wire electrical discharge machining (WEDM), cutting efficiency is a significant process index whose improvement has always been the research focus. Among the many factors affecting cutting efficiency, discharge energy is the most important factor. Different energy distribution form pulses were obtained by changing the peak currents at single-pulse different discharge stages. Through single-pulse discharge experiments, pulse energy distribution how to impact discharge channel motion characteristics was studied. When the energy distribution is changed through gradually increasing the peak current, an outward-pointing pressure difference will be formed inside the channel, which provides a driving force for the channel to move faster, accelerating the material erosion rate and increasing the discharge crater surface size. The cutting results reveal consistent variations in the cutting efficiency and surface size of individual discharge crater with the pulse energy distribution form. Through changing single-pulse energy distribution, the cutting efficiency can be improved by about 21%. [ABSTRACT FROM AUTHOR]

The development of e-commerce applications for small-value transactions introduces significant security and privacy challenges. Micropurchases, that is, commercial operations involving micropayments, offer a practical solution that balances efficiency and security for these transactions. The increasing demand for this payment approach, especially with technologies such as the Internet of Things (IoT), highlights the need for innovative solutions. This paper presents a novel micropurchase protocol utilizing a new type of channels, termed transferable payment channels. The proposed protocol, managed through smart contracts, facilitates fair and equitable exchanges between minimal monetary units (μ -coins) and desired goods or services, enabling efficient low-value payments. Transferable payment channels enable off-chain transactions, reducing the reliance on on-chain transactions to achieve essential security features and ensure fair exchanges without a centralized intermediary or Trusted Third Party (TTP), commonly employed in traditional payment systems. The protocol outlines the processes for making purchases, handling payments, and incorporating functionalities for the transfer and reuse of payment channels by both customers and merchants. Additionally, it specifies procedures for merchants to redeem earned μ -coins and for customers to refund unused μ -coins. This comprehensive set of functions makes the protocol fully functional and highly efficient for micropurchases. By introducing transferable payment channels and minimizing reliance on centralized intermediaries, this work significantly advances the security and efficiency of micropayment systems. The proposed protocol has been implemented and analyzed for both security and performance. [ABSTRACT FROM AUTHOR]

Visible-infrared person re-identification (VI Re-ID) is designed to perform pedestrian retrieval on non-overlapping visible-infrared cameras, and it is widely employed in intelligent surveillance. For the VI Re-ID task, one of the main challenges is the huge modality discrepancy between the visible and infrared images. Therefore, mining more shared features in the cross-modality task turns into an important issue. To address this problem, this paper proposes a novel framework for feature learning and feature embedding in VI Re-ID, namely Channel Enhanced Cross-modality Relation Network (CECR-Net). More specifically, the network contains three key modules. In the first module, to shorten the distance between the original modalities, a channel selection operation is applied to the visible images, the robustness against color variations is improved by randomly generating three-channel R/G/B images. The module also exploits the low- and mid-level information of the visible and auxiliary modal images through a feature parameter-sharing strategy. Considering that the body sequences of pedestrians are not easy to change with modality, CECR-Net designs two modules based on relation network for VI Re-ID, namely the intra-relation learning and the cross-relation learning modules. These two modules help to capture the structural relationship between body parts, which is a modality-invariant information, disrupting the isolation between local features. Extensive experiments on the two public benchmarks indicate that CECR-Net is superior compared to the state-of-the-art methods. In particular, for the SYSU-MM01 dataset, the Rank1 and mAP reach 76.83% and 71.56% in the "All Search" mode, respectively. [ABSTRACT FROM AUTHOR]

Visible-infrared person re-identification (VI Re-ID) is designed to perform pedestrian retrieval on non-overlapping visible-infrared cameras, and it is widely employed in intelligent surveillance. For the VI Re-ID task, one of the main challenges is the huge modality discrepancy between the visible and infrared images. Therefore, mining more shared features in the cross-modality task turns into an important issue. To address this problem, this paper proposes a novel framework for feature learning and feature embedding in VI Re-ID, namely Channel Enhanced Cross-modality Relation Network (CECR-Net). More specifically, the network contains three key modules. In the first module, to shorten the distance between the original modalities, a channel selection operation is applied to the visible images, the robustness against color variations is improved by randomly generating three-channel R/G/B images. The module also exploits the low- and mid-level information of the visible and auxiliary modal images through a feature parameter-sharing strategy. Considering that the body sequences of pedestrians are not easy to change with modality, CECR-Net designs two modules based on relation network for VI Re-ID, namely the intra-relation learning and the cross-relation learning modules. These two modules help to capture the structural relationship between body parts, which is a modality-invariant information, disrupting the isolation between local features. Extensive experiments on the two public benchmarks indicate that CECR-Net is superior compared to the state-of-the-art methods. In particular, for the SYSU-MM01 dataset, the Rank1 and mAP reach 76.83% and 71.56% in the "All Search" mode, respectively. [ABSTRACT FROM AUTHOR]

This article focuses on the advancement of fantasy policy solutions to irregular migration, drawing on the case study of the UK/French border. In 2018 people began to cross the English Channel in significant numbers to seek asylum. This led to much commentary and a raft of new legislation seeking to criminalise people crossing the Channel and end rights to seek asylum in the UK. In this article, we explore the interaction between two sets of fantasies that are advanced by politicians and mainstream political parties in the UK. That is: the liberal technocratic fantasy – that this phenomenon can be efficiently 'fixed' through interventions in policing and multilateral cooperation with neighbouring EU states; and the illiberal fantasy that extreme and performative punishments can solve it. These fantasies intersect and break at different points in time, and involve many of the same policy solutions which are represented in different terms. Importantly, both of these fantasies reproduce racialised and colonial logics and ultimately serve border imperialism. [ABSTRACT FROM AUTHOR]

This study examines the flow dynamics and heat transfer characteristics of Maxwell fluid in a channel influenced by magnetohydrodynamics (MHD), Joule heating, thermal radiation, and boundary layer suction/blowing effects. The governing partial differential equations (PDEs) for momentum, energy, and concentration are transformed into ordinary differential equations (ODEs) using similarity transformations. The boundary value problem (BVP) is solved numerically using the bvp4c solver in MATLAB, yielding accurate solutions for velocity, temperature, and concentration profiles under various parameters. Key findings reveal that the porous parameter decreases the velocity profile but increases the temperature profile for both suction and blowing effects. Additionally, the MHD, Deborah, and Eckert numbers significantly influence the velocity and temperature profiles differently under these conditions. This study highlights the crucial role of integrating MHD, thermal, and boundary control effects to optimize performance and efficiency in engineering systems involving Maxwell fluids, with applications in polymer processing, biomedical engineering, electronics cooling, oil recovery, and chemical processing. [ABSTRACT FROM AUTHOR]

The turbidite channel of South China Sea has been highly concerned. Influenced by the complex fault and the rapid phase change of lithofacies, predicting the channel through conventional seismic attributes is not accurate enough. In response to this disadvantage, this study used a method combining grey relational analysis (GRA) and support vector machine (SVM) and established a set of prediction technical procedures suitable for reservoirs with complex geological conditions. In the case study of the Huangliu Formation in Qiongdongnan Basin, South China Sea, this study first dimensionalized the conventional seismic attributes of Gas Layer Group I and then used the GRA method to obtain the main relational factors. A higher relational degree indicates a higher probability of responding to the attributes of the turbidite channel. This study then accumulated the optimized attributes with the highest relational factors to obtain a first-order accumulated sequence, which was used as the input training sample of the SVM model, thus successfully constructing the SVM turbidite channel model. Drilling results prove that the GRA-SVM method has a high drilling coincidence rate. Utilizing the core and logging data and taking full use of the advantages of seismic inversion in predicting the sand boundary of water channels, this study divides the sedimentary microfacies of the Huangliu Formation in the Lingshui 17-2 Gas Field. This comprehensive study has shown that the GRA-SVM method has high accuracy for predicting turbidite channels and can be used as a superior turbidite channel prediction method under complex geological conditions. [ABSTRACT FROM AUTHOR]

2,4-Difluoronitrobenzene has been reacted with a linker diamine (ethylenediamine or propylenediamine) and butylamine, in either order, to give new molecular building blocks for porous supramolecular networks. Two structures were established by X-ray single crystal structure determinations. The propylenediamine structure displays small pores, which may be due to the longer and more flexible linker in the structure. [ABSTRACT FROM AUTHOR]

Copyright of Coal Geology & Exploration is the property of Xian Research Institute of China Coal Research Institute and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Among the various types of polymeric materials, geosynthetics deserve special attention. A geosynthetic is a product made from synthetic polymers that is embedded in soils for various purposes. There are some basic functions of geosynthetics, namely, erosion control, filtration, drainage, separation, reinforcement, containment, barrier, and protection. Geosynthetics for erosion control are very effective in preventing or limiting soil loss by water erosion on slopes or river/channel banks. Where the current line runs through the undercut area of the slope, the curvature of the arch is increased. If this phenomenon is undesirable, the meander arch should be protected from erosion processes. The combination of geosynthetics provides the best resistance to erosion. In addition to external erosion, internal erosion of soils is also a negative phenomenon. Internal erosion refers to any process by which soil particles are eroded from within or beneath a water-retaining structure. Geosynthetics, particularly geotextiles, are used to prevent internal erosion of soils in contact with the filters. Therefore, the main objective of this review paper is to address the many ways in which geosynthetics are used for erosion control (internal and external). Many examples of hydrotechnical and civil engineering applications of geosynthetics will be presented. [ABSTRACT FROM AUTHOR]

A set of exact solutions is suggested for the Poisson equation in a plane region of a certain form for describing a flow of Newtonian incompressible liquid in a channel at low Reynolds numbers. The motion of an ideal liquid in a region bounded by a rotating contour, torsion of a rod, deflection of a membrane at zero displacement on the boundary of its region, and heating of a rod under certain conditions are equivalent to a mathematically formulated problem of such a flow. A possibility is demonstrated to construct approximate solutions to the said problem for certain sections of a channel, having a parabolic segment of the contour, using exact solutions to this problem. Examples are given for the construction of flow regions in a prismatic channel resting on a parabolic contour. [ABSTRACT FROM AUTHOR]

Two-pore channels are pathophysiologically important Na+-and Ca2+-permeable channels expressed in lysosomes and other acidic organelles. Unlike most other ion channels, their permeability is malleable and ligand-tuned such that when gated by the signaling lipid PI(3,5)P2, they are more Na+-selective than when gated by the Ca2+ mobilizing messenger nicotinic acid adenine dinucleotide phosphate. However, the structural basis that underlies such plasticity and single-channel behavior more generally remains poorly understood. A recent Cryo-electron microscopy (cryo-EM) structure of TPC2 bound to PI(3,5)P2 in a proposed open-channel conformation provided an opportunity to address this via molecular dynamics (MD) simulation. To our surprise, simulations designed to compute conductance through this structure revealed almost no Na+ permeation events even at very high transmembrane voltages. However further MD simulations identified a spontaneous transition to a dramatically different conformation of the selectivity filter that involved expansion and a flip in the orientation of two core asparagine residues. This alternative filter conformation was remarkably stable and allowed Na+ to flow through the channel leading to a conductance estimate that was in very good agreement with direct single-channel measurements. Furthermore, this conformation was more permeable for Na+ over Ca2+. Our results have important ramifications not just for understanding the control of ion selectivity in TPC2 channels but also more broadly in terms of how ion channels discriminate ions. [ABSTRACT FROM AUTHOR]

This paper presents an experimental study on the voltage instability in proton exchange membrane fuel cells operating at high current densities, which is important for improving their reliability and durability. Based on experimental findings regarding transparent fuel cells, a method is proposed to identify different types of voltage instability via statistical results of linear changing rate and oscillation amplitude. The types and boundaries of voltage instability are elucidated while evaluating the impact of cathode relative humidity and flow rate on voltage instability. The findings reveal that (1) the voltage instability is greatly influenced by the cathode-side relative humidity and flow rate, (2) there are three typical types of voltage instability: voltage decline, voltage oscillation, and both, and (3) voltage decline occurs at low cathode humidity, while voltage oscillation becomes more severe at large cathode humidity and low flow rate; (4) Reduction of water content in the membrane leads to voltage decline, while an increase in water content in the catalyst layer, gas diffusion layer, and channels leads to voltage oscillation. A full-condition map diagram demonstrating voltage instability during high current density conditions is presented. The method for creating this map for voltage instability will be employed to enhance fuel cell performance. [ABSTRACT FROM AUTHOR]

We embarked on an investigation with potential implications for studying blood flow within the cardiovascular system; keeping this application in mind, this investigation aims to provide numerical evaluations for a complex problem involving MHD flow, chemical reactivity, and energy transfer of a Maxwell fluid within a channel. The governing equations for momentum, concentration, and energy are renovated into ODEs for concentrated analysis using a similarity transformation. Dimensionless velocity, temperature, and concentration fields corresponding to steady motions of Maxwell fluid over a channel are numerically recognized using the bvp4c inbuilt software in MATLAB. We validated our results with existing work to check the gained results and got an excellent agreement. The impression of physical parameters on fluid motion is plotted and debated. The quantitative outcome of this study is that the Deborah number surges, and both velocity and temperature experience enhancement while the concentration within the fluid diminishes. This knowledge can be applied to various fields, such as material processing, biomedical engineering, and environmental sciences, to optimize processes and design systems accordingly. The outcomes and key findings of this study indicate that concentration distribution declines with the introduction of a chemical reaction and a complex Schmidt number. Additionally, the quantitative results of this learning are that the impression of the magnetic parameter is observed, resulting in reduced velocity and temperature profiles, while concentration profiles exhibit an increase across the entire domain. Furthermore, the rise in the Reynolds number corresponds to an escalation in the temperature outline. [ABSTRACT FROM AUTHOR]

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

As an alternative to hydrogen peroxide (H2O2) production by complex anthraquinone oxidation process, photosynthesis of H2O2 from water and oxygen without sacrificial agents is highly demanded. Herein, a covalently connected molecular heterostructure is synthesized via sequential C−H arylation and Knoevenagel polymerization reactions for visible‐light and sacrificial‐agent‐free H2O2 synthesis. The subsequent copolymerization of the electron‐deficient benzodithiophene‐4,8‐dione (BTD) and the electron‐rich biphenyl (B) and p‐phenylenediacetonitrile (CN) not only expands the π‐conjugated domain but also increases the molecular dipole moment, which largely promotes the separation and transfer of the photoinduced charge carriers. The optimal heterostructured BTDB‐CN0.2 manifested an impressive photocatalytic H2O2 production rate of 1920 μmol g−1 h−1, which is 2.2 and 11.6 times that of BTDB and BTDCN. As revealed by the femtosecond transient absorption (fs‐TA) and theoretical calculations, the linkage serves as a channel for the rapid transfer of photogenerated charge carriers, enhancing the photocatalytic efficiency. Further, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) uncovers that the oxygen reduction reaction occurs through the step one‐electron pathway and the mutual conversion between C=O and C−OH with the anchoring of H+ during the catalysis favored the formation of H2O2. This work provides a novel perspective for the design of efficient organic photocatalysts. [ABSTRACT FROM AUTHOR]

As an alternative to hydrogen peroxide (H2O2) production by complex anthraquinone oxidation process, photosynthesis of H2O2 from water and oxygen without sacrificial agents is highly demanded. Herein, a covalently connected molecular heterostructure is synthesized via sequential C−H arylation and Knoevenagel polymerization reactions for visible‐light and sacrificial‐agent‐free H2O2 synthesis. The subsequent copolymerization of the electron‐deficient benzodithiophene‐4,8‐dione (BTD) and the electron‐rich biphenyl (B) and p‐phenylenediacetonitrile (CN) not only expands the π‐conjugated domain but also increases the molecular dipole moment, which largely promotes the separation and transfer of the photoinduced charge carriers. The optimal heterostructured BTDB‐CN0.2 manifested an impressive photocatalytic H2O2 production rate of 1920 μmol g−1 h−1, which is 2.2 and 11.6 times that of BTDB and BTDCN. As revealed by the femtosecond transient absorption (fs‐TA) and theoretical calculations, the linkage serves as a channel for the rapid transfer of photogenerated charge carriers, enhancing the photocatalytic efficiency. Further, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) uncovers that the oxygen reduction reaction occurs through the step one‐electron pathway and the mutual conversion between C=O and C−OH with the anchoring of H+ during the catalysis favored the formation of H2O2. This work provides a novel perspective for the design of efficient organic photocatalysts. [ABSTRACT FROM AUTHOR]

An efficient mmWave communication interface requires optimized selection of channel-noise aware transmitter components, noise-reduction amplifiers, low-BER (Bit Error Rate) receiver-components and efficient modulation techniques. A wide variety of such optimization models are proposed by researchers, and each of them very in terms of their internal & external operating characteristics. For instance, channel modelling techniques focus on optimizing transmitter components, while amplifier & de-amplifier design models focus on modulation & demodulation component optimizations. Due to such a wide variation is component designs, it becomes ambiguous for designers to identify optimal models for the context-specific communication interface designs. To reduce this ambiguity, a detailed survey of modern-day mmWave communication interfaces is discussed in this text. This discussion includes analysis of these models in terms of their functional nuances, contextual advantages, application-specific limitations, and deployment-specific future scopes. It was observed that deep learning models & bioinspired optimization techniques outperform others in terms of communication efficiency under real-time use cases. Based on this discussion, readers will be able to observe similar recommendations and identify optimal models for their mmWave communication radio designs. This discussion is further extended via a comparative evaluation of these models in terms of their computational complexity, processing delay, efficiency of optimization, BER levels, and scalability levels. Using this comparison, readers will be able to evaluate these models, and use them for their performance-specific use cases. To further contemplate this discussion, these parameters were combined to calculate a novel Communication Interface Rank Metric (CIRM), which will assist readers to identify micro-level communication interfaces that have higher overall efficiency levels even under different noise and channel conditions. [ABSTRACT FROM AUTHOR]

The micro-channel fabrication in carbon fiber-reinforced polymer (CFRP) composite through electrical discharge machining (EDM) process followed by the comprehensive study of dimensional deviation in the conceived micro-channels are presented in this work. The factors namely, voltage (V), tool rotational speed (TRS), and feed rate (FR) were considered for assessing their impact on channel width deviation (CWD). In addition to the variance analysis,, two potential metaheuristic optimizers, the Butterfly optimization algorithm (BOA) and the Spotted Hyena optimization algorithm (SHO) were used to identify the optimal operating parameters of the aforementioned process. The BOA revealed that the optimal process variables were FR = 5.99 µm/s, V = 150 volt, and TRS = 577.08 rpm for a CWD = 74.96 µm. In contrary, SHO revealed that FR = 5.99 µm/s, V = 150 volt, TRS = 542.96 rpm, and CWD = 74.53 µm were the corresponding optimal values. Overcuts were observed in the fabricated micro-channels and a detailed illustration of the mechanism of overcut formation was provided. [ABSTRACT FROM AUTHOR]

The reliable design of multiphase micro‐structured apparatus requires a precise knowledge of the internal flow regime. Previous research indicated that classifiers based on artificial neural networks (ANN) are relatively simple to develop and provide a reasonable accuracy when trained with data for specific inlet designs. This paper introduces advanced ANN classifiers capable of predicting all relevant flow regimes regardless of the inlet design with a recall of 94 % and above for Taylor, churn, dispersed, rivulet, and parallel flows, between 89 % and 94 % for annular and bubbly flows, and 83 % for Taylor‐annular flow. These classifiers were trained and validated by using more than 13,000 experimental data points extracted from 97 flow maps. [ABSTRACT FROM AUTHOR]

The evolution of wireless communication in the presence of multipath fading and shadowing is generally strained by the worsening of propagation conditions. Thus, in order to estimate the achievable improvements of the link quality (due to channel enhancement), such a parameter as diversity gain is usually used. The diversity gain is classically defined as a limit for infinitely increasing signal-to-noise ratio (SNR) at the receiver input, theoretically attained only in asymptotics, and in practice attained at very high SNR values (e.g., 50–70 dB), which are unrealistic from the practical perspectives for wireless fading channels. In this case, a modified version of the same metric (i.e., the finite-SNR diversity gain; FSDG) was proposed. The presented research performs a comparative analysis of the FSDG for the case of a multipath channel with fading induced by second order scattering and fluctuating line-of-sight (LoS) component (i.e., fluctuating double-Rayleigh with Line-of-Sight; fdRLoS). The signal model included the hexagonal quadrature amplitude modulations (QAM) with regular and irregular constellations. For the considered problem, an exact expression for the FSDG was derived and analyzed as a function of channel parameters (responsible for fading severity and shadowing intensity) and modulation formats. It has been found that the FSDG can exceed the classical (asymptotic) diversity gain by the order of magnitude, and scenarios have been identified where this can occur (for example, the maximum is achieved under conditions of light shadowing and strong line-of-sight component). A nonmonotonic dependence of FSDG on the QAM constellation size (for any type of constellation) was found out: for low-to-moderate average SNR, for extremely weak and extremely strong LoS, the highest FSDG is achieved with smaller constellations, whereas for moderate LoS components, with larger constellations. [ABSTRACT FROM AUTHOR]

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The modern communication network has advanced to such an extent that it is now possible for devices within a wireless personal area network (WPAN) to communicate among themselves directly. However, the limited shared radio resources of a WPAN lead to numerous issues, such as cross-layer interference and data collisions, which wind up affecting the quality of communication. A load based dynamic channel allocation (LB-DCA) model has been proposed to enhance the performance of device-to-device communication in WPAN. This model uses several control schemes in collaboration with interference estimation and channel load balancing mechanisms to allocate and manage the radio resources efficiently. The objective of this model is to achieve high throughput, low interference and low energy consumption. The control schemes implemented are based on distributed coordination and a cell-splitting approach. These schemes are utilized to estimate the channel usage and number of active nodes in a network. The interference estimation is done by using a new efficiency formula. Further, channel load balancing takes into account the hops and load factor values. The proposed model obtained 98.58% CSI, 95.86% MCC, 96.35% delta-P, 97.96% FMI, 99.83% BMI, 21.52% enhanced spectrum efficiency, 16.38% enhanced scalability, 18.79% enhanced signal quality, 18.64% enhanced power control and 18.89% enhanced energy efficiency. [ABSTRACT FROM AUTHOR]

With the advent of fifth Generation of cellular communication with its key features that superior over all the precedent generations. However, there are some challenges need to be taken into consideration. The main crucial part of communication system is the receiver and as it is known there are two main types of receivers which can be used to demodulate the signals and recover the transmitted data. In this paper, we used those two types of algorithm receivers which are the Non-Coherent and Coherent receivers. They are firstly demonstrated in details in accordance with receiver specification design and then moved to the practical side of implementation. In which novelty of our work is highlighted, by carrying out those different algorithms on the ADSP 21364 SHARC board where initially sampling the received DPSK signal, design the Bandpass and lowpass digital filtering respectively and all to be compiled by Analog Devices VisualDSP + + software that is programmed by C language prior to download to the ADSP Board chip. The same algorithm is followed in the frame synchronization for both of them by detecting the message through distinguishing the preamble of the message " + + + + " data which is before the 72 bytes (real message).Then that actual message will be stored and dumped to the memory and displayed to ensure from the received message whether it is corrupted with errors or not. However, it is clearly noticed that the Coherent receiver is more efficient than the Non-coherent, but it still a bit expensive because used double look-up tables for cosine and sine in IQ converter. Finally, coherent receiver with Costas loop algorithm was implemented as well to improve the previous differential detection scheme. [ABSTRACT FROM AUTHOR]

This study chooses a transnational perspective to understand the practice of American culture in Indonesia. As this study discussed identity formed in social media and involved popular music singers, the theories applied in this study are the theories of identity, youth culture, new media, and popular music from the popular culture approach. In examining this study, the content analysis method was applied. After reviewing primary and secondary sources and find suppported theories for the data, it is find that the cegil identity is channeled through Taylor Swift and NIKI’s musicality due to the interconnection of youth culture and new media in treating popular music. The star and stardom of Swift and NIKI influence people's perspectives on their songs. The cegil community likes their lyricism in descriptive, imaginative, and poetic songs. Global access and media allow Spotify and X as the mediums to communicate and participate for cegil to express their feelings. They were also the place where the cegil term was coined. The last factor is a youth culture that treats music as the soundtrack of life and hence sees songs as a medium to express themselves. [ABSTRACT FROM AUTHOR]

The process by which debris flows shift from an active channel and branch out into new transport or depositional areas is termed "avulsion." They pose serious risks for structures and populations on debris-flow fans, yet avulsion mechanisms are relatively unknown and unaccounted for in hazard assessments, as compared to avulsions of rivers and streams, which are better understood. This study analyzes six debris-flow fans in the White Mountains of California and Nevada to identify relationships between avulsion locations and channel characteristics, constrain the controlling factors on avulsion, assess the probability that avulsion will occur at specified locations, and develop a method to predict avulsion locations. A database of avulsion locations and their channel characteristics was compiled in the field. These were compared to the characteristics of other positions on the fan surface that show evidence of debris flows that did not avulse through stepwise, binary logistic regression. Results indicate that two-thirds of avulsion likelihood can be attributed to the percentage of boulders at the site, slope angle, channel width, and the ratio between flow thickness and average slope at the avulsion location. The accuracy of this model can be improved when it accounts for the presence of a coarse channel plug, which increases the likelihood of avulsion. Application of the model is demonstrated by runout simulations with forced avulsions from modeled channel plugs. [ABSTRACT FROM AUTHOR]

The Radar Cross Section (RCS) plays a crucial role in radar systems, serving to detect and characterize radar targets. Moreover, the need to penetrate foliage and capture images of man-made structures like roads and buildings has driven the development of very high frequency/ultra high frequency (VHF/UHF)-based radar systems. In this context, we propose a novel polyphase-coded spread spectrum (PCSS) radar system designed for RCS measurements and ISAR imaging over VHF/UHF radio channels in open environments. To provide a comprehensive understanding, we examined the open range, considering factors such as amplitude distribution function, root mean square (RMS) delay, and coherence bandwidth, followed by a link budget analysis. We also conducted a comparative study of RCS measurements to evaluate the performance of the proposed radar system, demonstrating its effectiveness through theoretical calculations. Furthermore, we assessed the radar imaging capabilities by applying the CLEAN algorithm to improve the quality of the generated images. [ABSTRACT FROM AUTHOR]

Pellets have voids in their structure, which form a pore space. Pellet pores can be represented by closed volumes or channels, capillaries. The volume of capillaries can be estimated by impregnating pellets with water. The purpose of this work is to assess the possibility of studying the pore space of burnt pellets using the capillary-porous solids model. For this purpose, samples of laboratory and industrial pellets were presented. According to the data obtained, samples with a high moisture capacity value have a higher recoverability. This method of evaluating the pores of burnt pellets provides information about open porosity, which can be used to predict their recoverability. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the Leray problem for steady Navier–Stokes system with full slip boundary conditions in a two-dimensional channel with straight outlets. The existence of solutions with arbitrary flux in a general channel supplemented with slip boundary conditions, which tend to the associated shear flows at far fields, is established. Furthermore, if the flux is suitably small, the solution is proved to be unique. One of the crucial ingredients is to construct an appropriate flux carrier and to show a Hardy type inequality for flows with full slip boundary conditions. [ABSTRACT FROM AUTHOR]

A model of the multichannel queuing system is considered. Each channel contains some service lines. There are several input flows. Each customer requires several lines to be serviced. If the channel does not have a sufficient number of service lines, it is possible to reorient this customer to another channel. The service time has a distribution function of a general form depending both on the flow and on the number of lines required by the customer. A fast simulation method aimed to evaluate the blocking probability of customers of a certain flow with a given number of service lines is proposed. The method is compared with the Monte Carlo method using numerical example and the gain in simulation time is illustrated in particular. [ABSTRACT FROM AUTHOR]

Blockchain refers to distributed ledger technology which stores records without the help of a central authority. Born with bitcoin, this brainstorming technology finds its applications in healthcare, land registry, education, pharmaceutical industry, digital records, manufacturing companies and so on. The properties of blockchain such as immutability, distributed nature, tamper-resistant made it a disruptive technology in many applications. The highlighting feature of this pioneering technology is the distributed storage of ledger on all the nodes of the network. This helps to achieve decentralization without the trust for third party. The transactions are proposed, executed, validated and are then added as blocks to the blockchain. The problems with all the blockchain framework is scalability with respect to storage space and throughput. Scalability is the most significant factor to be considered in this big data era. This article proposes a solution called Channel Based Clustered Sharding (CBCS) approach for Hyperledger fabric blockchain framework. In this work, a lookup table is maintained which helps in forwarding the transactions to the clustered shards for validation. The CBCS approach helps in parallel transaction processing which in turn improves scalability and throughput of the system. The performance of the proposed work is measured with the help of Hyperledger caliper, a benchmarking tool for the performance analysis of Hyperledger fabric. The results show that the performance of the proposed system is increased from 3000 tps to 30,000 tps. [ABSTRACT FROM AUTHOR]

A model of the multichannel queuing system is considered. Each channel contains some service lines. There are several input flows. Each customer requires several lines to be serviced. If the channel does not have a sufficient number of service lines, it is possible to reorient this customer to another channel. The service line has a distribution function of a general form depending both on the flow and on the number of lines required by the customer. A fast simulation method aimed to evaluate the blocking probability of customers of a certain flow with a given number of service lines is proposed. The method is compared with the Monte Carlo method using numerical example, and the gain in simulation time is illustrated in particular. [ABSTRACT FROM AUTHOR]

Quantum coherence and quantum correlations are important components of quantum information theory, which play important roles in quantum information processing. In this paper, we quantify correlations from coherence. The correlations relative to channels via metric-adjusted skew information are put forward. The corresponding results are suitable for special channels, such as positive operator-valued measurements (POVMs), projection measurements and von Neumann measurements. In addition, we discuss the dynamics of quantum correlations in the Bell-diagonal state relative to some classical channels via metric-adjusted skew information. The typical two are the Werner state and the isotropic state. We find that some separable states in entanglement resources theory possess correlations. It also shows quantum channels will disturb quantum states and have a great influence on the correlations. The correlations relative to different channels via different versions of metric-adjusted skew information have their advantages. This has inspired one to study the problem of the existence and action of various quantum correlations in quantum theory to be easily applied to experiments. [ABSTRACT FROM AUTHOR]

Copyright of Teras Jurnal: Jurnal Teknik Sipil is the property of Teras Jurnal: Jurnal Teknik Sipil and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Outer membrane proteins perform essential functions in uptake and secretion processes in bacteria. MspA is an octameric channel protein in the outer membrane of Mycobacterium smegmatis and is structurally distinct from any other known outer membrane protein. MspA is the founding member of a family with more than 3000 homologs and is one of the most widely used proteins in nanotechnological applications due to its advantageous pore structure and extraordinary stability. While a conserved C‐terminal signal sequence is essential for folding and protein assembly in the outer membrane of Gram‐negative bacteria, the molecular determinants of these processes are unknown for MspA. In this study, we show that mutation and deletion of methionine 183 in the highly conserved C‐terminus of MspA and mutation of the conserved tryptophan 40 lead to a complete loss of protein in heat extracts of M. smegmatis. Swapping these residues partially restores the heat stability of MspA indicating that methionine 183 and tryptophan 40 form a conserved sulfur‐π electron interaction, which stabilizes the MspA monomer. Flow cytometry showed that all MspA mutants are surface‐accessible demonstrating that oligomerization and membrane integration in M. smegmatis are not affected. Thus, the conserved C‐terminus of MspA is essential for its thermal stability, but it is not required for protein assembly in its native membrane, indicating that this process is mediated by a mechanism distinct from that in Gram‐negative bacteria. These findings will benefit the rational design of MspA‐like pores to tailor their properties in current and future applications. [ABSTRACT FROM AUTHOR]

The investigation of dual-mode synaptic plasticity was conducted in thin-film transistors (TFTs) featuring an HfSe2 channel, coupled with an oxygen-deficient (OD)-HfO2 layer structure. In these transistors, the application of negative gate pulses resulted in a notable increase in the post-synaptic current, while positive pulses led to a decrease. This distinctive response can be attributed to the dynamic interplay of charge interactions, significantly influenced by the ferroelectric characteristics of the OD-HfO2 layer. The findings from this study highlight the capability of this particular TFT configuration in closely mirroring the intricate functionalities of biological neurons, paving the way for advancements in bio-inspired computing technologies. [ABSTRACT FROM AUTHOR]

The problem of a fully developed turbulent flow and developed heat transfer was solved numerically at a Reynolds number ranging from 5 × 104 to 2 × 105 for a spatially periodic model of a one-sided ribbed channel as a prototype of the flow path of an internal convective cooling system for a gas turbine blade. The flow and heat transfer were investigated at the Prandtl number of 0.7. The channel has a rectangular cross-section with an aspect ratio of 1.5. Square ribs with a 10% rib-to-channel height ratio are installed on one of the wide channel walls at an angle of 45° to the longitudinal axis of the channel. To quantify the effect of ribs on the flow and heat transfer, the integral parameters, such as hydraulic resistance factor and Nusselt number determined from the grid-converged solutions, are compared with the integral parameters for a fully developed flow and heat transfer in a smooth channel predicted by the same numerical method. The results of numerical simulation for the ribbed channel are also compared with published experimental data obtained under partly similar conditions. The predicted hydraulic resistance factor agrees well with the experiment. The predicted heat transfer agrees with the experiment within 11%, but the trends in heat transfer with increasing Reynolds number obtained using numerical and physical simulation are different. This difference may be caused by the fact that fully developed heat transfer could not be attained in the short experimental channel. Analytical power-law dependences on the Reynolds number are obtained for the hydraulic resistance factor and the Nusselt number pertaining to all channel walls and only to the ribbed wall. It is pointed out that the hydraulic resistance factor depends weakly on the Reynolds number, which is typical for local resistances, and the dependences for Nusselt numbers corrected for the specifics of the problem are close to the dependences for near-wall layers and flows in smooth channels. [ABSTRACT FROM AUTHOR]

This paper presented the performance of physical layer security of permutation index (PI) with modulating bits-based orthogonal frequency division multiplexing differential chaos shift keying system (PIM-OFDMDCSK), the objective behind PIM-OFDM-DCSK is to improve and increase the information rate, spectral, and energy efficiencies. In PIM-OFDM-DCSK, the (M) subcarriers, each carry (n+1) bits. The n bits are index bits utilized to choose one permutation of the chaotic reference. On the receiver, after OFDM demodulation, the correlation is made between the permuted versions of the chaotic reference and the received bearing sequence of data. Then the received bits are assessed by determining the maximum correlator outputs via which the n bits are detected. Then the maximum output correlator sign is utilized to detect the modulating bit. The performance of the PIM-OFDM-DCSK is tested under additive white gaussian noise and multipath fading channel. Furthermore, the bit error rate is derived based on the wiretap system for the proposed PIM-OFDM-DCSK and compared with other DCSK modulations. The results show that the proposed PIM-OFDM-DCSK scheme is promising and competitive compared with other DCSK system, and the best BER performance is as an increase in the value of n and a decrease in the value of β. [ABSTRACT FROM AUTHOR]

Background: The Fast Health Interoperability Resources (FHIR) standard was proposed and released to solve the interoperability problems of the electronic health records. The FHIR Subscription resources are used to establish real-time event notifications from the FHIR server to another system. There are several communication channels such as rest-hook and websocket. The objective of our work is to compare the performance of the FHIR subscription using the resthook and websocket channels. Methods: HAPI FHIR server, python websocket clients and HTTP endpoints were used to measure the processor and memory usage of the two subscription channels. Tests were performed with 5, 10, 15, 20, 30, 40, 50, 60, 70 and 80 clients. The performance was logged using windows performance monitor. Results: The rest-hook subscription showed near six-fold increase in resource utilization when increasing the clients from 5 to 80. On the contrary, the websocket subscription channel did not reach a two-fold increase. Conclusion: The type of the subscription channel should be carefully selected and load distribution should be considered when the number of clients grows. [ABSTRACT FROM AUTHOR]

Stainless steel bipolar plates (BPs) fabricated using innovative additive manufacturing techniques can improve fuel cell performance and reduce costs. A high current density can be obtained using a low‐cost membrane electrode assembly (MEA) with low platinum (Pt) loading at the anode, along with BPs with rectangular micro channels. Three types of BPs of serpentine flow field are designed after varying the width of the rectangular channel. Two types of MEAs are used. First is 0.12 mg cm−2 Pt loading at anode, and the second is 0.50 mg cm−2. Wherein MEA with Pt loading at 0.12 mg cm−2 is used, a high current density is obtained as the channel width decreases. The BP with 300 µm channels has a current density of 1.205 A cm−2, which is higher by 31.4% than that of BP with 500 µm channels and higher by 70.2% than that of the BP with 940 µm channels. However, when the MEA with Pt loading at 0.50 mg cm−2 is applied to the test, the opposite results are obtained: As the channel width becomes narrow, the current density decreases. In the long‐term operation, a similar trend in the current density as that of the short‐term operation is observed. [ABSTRACT FROM AUTHOR]

Copyright of China Harbour Engineering is the property of Editorial Office of China Harbour Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The article provides a brief overview of irrigation systems and canals applied to slopes, landslide-prone, seismic areas, and swelling and collapsing soils. The new construction of the canal used for irrigation, energy and water supply purposes is described. In order to ensure the durability, longevity and reliability of the channel, a damping mat made of cast material is created under its cover, and the top is covered with a waterproof screen. Dowels are placed on the bottom and sides of the channel and the bottom dowel is riveted to the solid bedrock and connected with piles placed at certain distances. Drainage was placed next to the bottom dowel, an operation road was created on one side of the channel, and a berm road was created on the other side. A bathtub was built on the side of the road and a forest-bush strip was built on its bank. [ABSTRACT FROM AUTHOR]

In this article, we report the design and fabrication of a 'do-it-yourself' microfluidic channel with a circular cross-section, created outside a cleanroom facility. In this approach, the fabrication of the channel do not require any chemical etching or lithography steps, making it safe and suitable for small research groups. The channel is fabricated using the soft-lithography method in polydimethylsiloxane (Sylgard® 184). A copper wire with a diameter of 240 µm is used as a mold, and the channel is created using the wire pull-out method. This work also addresses the optimal use of polydimethylsiloxane in channel fabrication, as well as the challenges faced when connecting the microchannel to the outside world via tubing and techniques to overcome them. All simulations were conducted using COMSOL Multiphysics 6.0. The analytical, simulation, and test results, show a good match. [ABSTRACT FROM AUTHOR]

The water resources formed in the territory of the liberated Karabakh region have special importance in the sustainable water supply of the republic. By using these water resources effectively and comprehensively, it is possible to reliably supply water to the population located in the territory of the liberated Karabakh and East Zangezur economic regions. It is necessary to efficiently use the water resources of these rivers, which are very loaded in autumn and spring. It is possible to fully meet the electricity demand of the population living in these economic regions by building hydraulic engineering devices for various purposes on these rivers and create large fishing farms by using the water resources that will be collected in the reservoir basins. In the article, the issues related to the management of the water resources of the Barghushad and Hekari Rivers, which have great hydropower and biological potential. Only the hydropower potential of the Okhchu River, which is located in the area and extremely polluted by Armenia, can be used. The water of the Okhchu River, which is extremely toxic and polluted with heavy metals, poses a serious threat to the fish stock of the Khudafar reservoir built on the Araz River. [ABSTRACT FROM AUTHOR]