Search

In this work, in-plane thermal conductivity measurement was carried out on graphene-based papers. Graphene-based papers were fabricated using various processing techniques such as chemical vapor deposition (CVD), hot pressing of graphene slurry, and evaporation induced self-assembly. The prepared materials were characterized using scanning electron microscopy, Raman spectroscopy, and X-ray diffraction. In-plane thermal conductivity measurement was performed via a steady state thin film thermal conductivity apparatus. The in-plane thermal conductivity measurements show that the CVD based sample has the highest thermal conductivity. COMSOL Multiphysics was used to simulate the in-plane thermal conductivity of graphene-based papers. [ABSTRACT FROM AUTHOR]

As an important high-voltage electrical equipment in the substation, the performance stability of high-voltage current transformers is directly related to the safe operation of the power grid. The insulating medium of the traditional oil-immersed current transformer is an oil-immersed paper structure. When the oil-immersed current transformer malfunctions, it is easy to cause fire and explosion, resulting in very serious consequences. If the transformer with the epoxy resin impregnated paper insulation medium is used, there is no oil and gas inside; thus, it has high reliability, which greatly reduces the risk of fire and explosion. Based on this, considering the application research on the high-voltage current transformers epoxy resin impregnated paper technology, this paper mainly analyzes some precautions for the application of epoxy resin impregnated paper technology to the high-voltage current transformers from three aspects: the research on the insulation performance of the epoxy resin impregnated paper transformers, the research on the mechanical properties, and the research on the relevant experimental methods of the epoxy resin impregnated paper technology application to the high-voltage current transformers. [ABSTRACT FROM AUTHOR]

Multi-scale predictive models for the shock sensitivity of energetic materials connect energy localization ("hotspots") in the microstructure to macro-scale detonation phenomena. Calculations of hotspot ignition and growth rely on models for chemical reaction rates expressed in Arrhenius forms; these chemical kinetic models, therefore, are foundational to the construction of physics-based, simulation-derived meso-informed closure (reactive burn) models. However, even for commonly used energetic materials (e.g., HMX in this paper) there are a wide variety of reaction rate models available. These available reaction rate models produce reaction time scales that vary by several orders of magnitude. From a multi-scale modeling standpoint, it is important to determine which model best represents the reactive response of the material. In this paper, we examine three global Arrhenius-form rate models that span the range of reaction time scales, namely, the Tarver 3-equation, the Henson 1-equation, and the Menikoff 1-equation models. They are employed in a meso-informed ignition and growth model which allows for connecting meso-scale hotspot dynamics to macro-scale shock-to-detonation transition. The ability of the three reaction models to reproduce experimentally observed sensitivity is assessed by comparing the predicted criticality envelope (Walker–Wasley curve) with experimental data for pressed HMX Class V microstructures. The results provide a guideline for model developers on the plausible range of time-to-ignition that are produced by physically correct Arrhenius rate models for HMX. [ABSTRACT FROM AUTHOR]

The study and modeling of water exchange in complex media using different applications of diffusion and relaxation magnetic resonance (MR) have been of interest in recent years. Most models attempt to describe this process using a first order kinetics expression, which is appropriate to describe chemical exchange; however, it may not be suitable to describe diffusion-driven exchange since it has no direct relationship to diffusion dynamics of water molecules. In this paper, these limitations are addressed through a more general exchange expression that does consider such important properties. This exchange fraction expression features a multi-exponential recovery at short times and a mono-exponential decay at long times, both of which are not captured by the first order kinetics expression. Furthermore, simplified exchange expressions containing partial information of the analyzed system's diffusion and relaxation processes and geometry are proposed, which can potentially be employed in already established estimation protocols. Finally, exchange fractions estimated from simulated MR data and derived here were compared, showing qualitative similarities but quantitative differences, suggesting that the features of the derived exchange fraction in this paper can be partially recovered by employing an existing estimation framework. [ABSTRACT FROM AUTHOR]

Biased and accelerated molecular simulations (BAMS) are widely used tools to observe relevant molecular phenomena occurring on time scales inaccessible to standard molecular dynamics, but evaluation of the physical time scales involved in the processes is not directly possible from them. For this reason, the problem of recovering dynamics from such kinds of simulations is the object of very active research due to the relevant theoretical and practical implications of dynamics on the properties of both natural and synthetic molecular systems. In a recent paper [A. Rapallo et al., J. Comput. Chem. 42, 586–599 (2021)], it has been shown how the coupling of BAMS (which destroys the dynamics but allows to calculate average properties) with Extended Diffusion Theory (EDT) (which requires input appropriate equilibrium averages calculated over the BAMS trajectories) allows to effectively use the Smoluchowski equation to calculate the orientational time correlation function of the head–tail unit vector defined over a peptide in water solution. Orientational relaxation of this vector is the result of the coupling of internal molecular motions with overall molecular rotation, and it was very well described by correlation functions expressed in terms of weighted sums of suitable time-exponentially decaying functions, in agreement with a Brownian diffusive regime. However, situations occur where exponentially decaying functions are no longer appropriate to capture the actual dynamical behavior, which exhibits persistent long time correlations, compatible with the so called subdiffusive regimes. In this paper, a generalization of EDT will be given, exploiting a fractional Smoluchowski equation (FEDT) to capture the non-exponential character observed in the relaxation of intramolecular distances and molecular radius of gyration, whose dynamics depend on internal molecular motions only. The calculation methods, proper to EDT, are adapted to implement the generalization of the theory, and the resulting algorithm confirms FEDT as a tool of practical value in recovering dynamics from BAMS, to be used in general situations, involving both regular and anomalous diffusion regimes. [ABSTRACT FROM AUTHOR]

Geomagnetic navigation has become a hot spot in current research because of its characteristics of passiveness and good concealment. However, the magnetic interference from various ferromagnetic substances, electronic equipment, etc., of the carrier will be superimposed on the geomagnetic field, causing magnetometer measurement errors, thus affecting navigation accuracy. In practice, due to the limited maneuverability of the carrier, sufficient geomagnetic observation data cannot be obtained, resulting in the observation equation used for carrier magnetic interference compensation to be seriously pathological. To achieve the compensation of carrier magnetic interference, this paper proposes the total least squares method based on the ridge regression using the L curve to solve ridge parameters. This method can effectively suppress the measurement noise that exists on both sides of the observation equation, and is suitable for alleviating the pathological effects of carrier magnetic interference compensation. Experimental results show that the compensated magnetometer measurement error is reduced to 3% of the carrier magnetic interference by using the method proposed in this paper, which obtains more stable and accurate parameter estimates. [ABSTRACT FROM AUTHOR]

This paper proposes a piezoelectric energy harvester that concentrates force on the piezoelectric element by parallel springs. When vibrating, the force exerted by the mass is released at three equal points on the surface of the brass substrate through three parallel springs. This concentrated release of energy through the spring amplification effect facilitates large deformation of the piezoelectric ceramic sheet, resulting in a higher charge output. The results show that under the combined action of a 14 g annular hollow mass and a 0.3 mm wire diameter stainless steel spring, the energy harvester based on the lead zirconate titanate ceramic exhibited an outstanding output power of 1.0–32.1 mW at a low resonance frequency with acceleration amplitudes of 0.5–3 g (1 g = 9.8 m/s2). More importantly, to match the vibration frequency of the actual environment, this paper optimized the structure of the harvester and proposed that the harvester can be designed by selecting the weight of the mass block, the parameters and number of springs, and the shape of the brass substrate. The energy harvester designed in this study is expected to capture energy from low-frequency natural environments and exhibit outstanding output performance, which can provide guidelines for future efforts in this direction. [ABSTRACT FROM AUTHOR]

This paper describes the design and optimization of a 10 ml cartridge for patient sample processing using a 3.5 GHz (empty resonant frequency) TM010 cylindrical microwave cavity. The cartridge has been designed to augment a novel approach for the rapid diagnosis of M. tuberculosis (the causative agent of Ttuberculosis), which uses the direct application of microwaves to a bacteria-containing sample to release pathogen-specific DNA. The target bacterial DNA is then captured and recovered using magnetic nanoparticles coated with pathogen-specific DNA probes. Excitation parameters were optimized using three surrogates for M. tuberculosis, namely, M. smegmatis, M. abscessus, and M. bovis suspended in water and simulated sputum. The paper also explores the mechanism of microwave-mediated DNA release from bacteria using scanning electron microscopy. Examination of bacteria exposed to microwaves at power levels known to mediate the release of DNA reveals no obvious signs of permanent cell disruption, suggesting that a more subtle interaction is taking place. Finally, the presence of microwave-liberated M. bovis DNA was able to be detected at a level of sensitivity comparable to that achieved using microscopy. [ABSTRACT FROM AUTHOR]

As one of the promising room temperature nuclear radiation detection materials, the all-inorganic perovskite CsPbBr3 single crystal has been receiving much attention in recent years. Even though the performance of the CsPbBr3 detector is improving continuously, the disadvantages of detection instability have not been solved fundamentally, and this instability is mainly caused by ionic migration in the CsPbBr3 single crystal itself. In this paper, a reasonable ionic migration model is proposed based on an in-depth study of the current hysteresis phenomenon and ionic migration mechanism in the Ti/CsPbBr3/Ti detector. The model shows that the ions migrate to the anode or cathode under an external electric field, and the accumulated ions subsequently form an inverted internal electric field inside the crystal and carrier transport barriers at the metal–semiconductor interface simultaneously. The photoelectric characteristic and ionic migration activation energy (E a i o n) fitting results also prove the rationality of the ionic migration model. Furthermore, the ionic migration model can also be used to explain the left-shift of the energy response peak and the decrease in the normalized charge collection efficiency in the Ti/CsPbBr3/Ti detector. This paper systematically investigates the intrinsic origin of migrated ions and the influence of ionic migration on detection stability, which will provide a potential solution to improve detection stability by suppressing ionic migration in the near future. [ABSTRACT FROM AUTHOR]

Despite the importance of rhodium complexes in catalysis, and the favorable 100% natural abundance of the spin-1/2 103Rh nucleus, there are few reports of 103Rh nuclear magnetic resonance (NMR) parameters in the literature. In part, this is the consequence of the very low gyromagnetic ratio of 103Rh and its dismal NMR sensitivity. In a previous paper [Harbor-Collins et al., J. Chem. Phys. 159, 104 307 (2023)], we demonstrated an NMR methodology for 1H-enhanced 103Rh NMR and demonstrated an application to the 103Rh NMR of the dirhodium formate paddlewheel complex. In this paper, we employ selective 18O labeling to break the magnetic equivalence of the 103Rh spin pair of dirhodium formate. This allows the estimation of the 103Rh–103Rh spin–spin coupling and provides access to the 103Rh singlet state. We present the first measurement of a 18O-induced 103Rh secondary isotope shift as well as the first instance of singlet order generated in a 103Rh spin pair. The field-dependence of 103Rh singlet relaxation is measured by field-cycling NMR experiments. [ABSTRACT FROM AUTHOR]

In this paper, the super-cavitating phenomenon under the effect of two vehicles' encounter motion processes is numerically studied. Particular attention is given to the influence of the vertical gaps between the vehicle, the cavitation number, and the slenderness ratio on the cavity profile and radial force of the object. Several numerical models are built to study the cavity evolution process and the force acting on the vehicle to explore the influence mechanism of two vehicles' encounter motion on supercavitating flow. The study shows that the cavity around the vehicle is primarily affected by the vertical gaps and cavitation number, but is relatively weakly affected by the slenderness ratio. Several impact laws are acquired in the paper. The relationship between cavity fracture time and vertical gaps is approximately a power function and obeys the law of t = 5.433h0.3688. The concept of the time of the maximum radial force occurrence and the cavitation number follows the formula of t = 4.86e0.3688σ. The relationship between the maximum radial force occurrence position and the cavitation number is a function of Ln and consistent with the law n = −0.799ln(σ) + 8.427. [ABSTRACT FROM AUTHOR]

Dynamic shockless compression experiments provide the ability to explore material behavior at extreme pressures but relatively low temperatures. Typically, the data from these types of experiments are interpreted through an analytic method called Lagrangian analysis. In this work, alternative analysis methods are explored using modern statistical methods. Specifically, Bayesian model calibration is applied to a new set of platinum data shocklessly compressed to 570 GPa. Several platinum equation-of-state models are evaluated, including traditional parametric forms as well as a novel non-parametric model concept. The results are compared to those in Paper I obtained by inverse Lagrangian analysis. The comparisons suggest that Bayesian calibration is not only a viable framework for precise quantification of the compression path, but also reveals insights pertaining to trade-offs surrounding model form selection, sensitivities of the relevant experimental uncertainties, and assumptions and limitations within Lagrangian analysis. The non-parametric model method, in particular, is found to give precise unbiased results and is expected to be useful over a wide range of applications. The calibration results in estimates of the platinum principal isentrope over the full range of experimental pressures to a standard error of 1.6%, which extends the results from Paper I while maintaining the high precision required for the platinum pressure standard. [ABSTRACT FROM AUTHOR]

This paper presents a self-consistent multi-dimensional mathematical model and a numerical approach for simulating the low-temperature plasma induced by the femtosecond laser filament. Addressing limitations in current models, we analyze key aspects of the laser plasma behavior, including plasma generation, detailed chemical kinetics, energy exchange channels, total energy balance, and hydrodynamics. The developed model and LOTASFOAM code are applied to study the temporal and spatial decay of the plasma produced by a femtosecond laser pulse in pure nitrogen at atmospheric pressure. The paper also includes a discussion on the spatial and temporal dynamics of electronically excited states of nitrogen in the decaying laser plasma. [ABSTRACT FROM AUTHOR]

In this paper, an ultra-thin absorber with a total thickness of 9.2 mm is designed and verified at the frequency band of 1–5.34 GHz. The absorber is composed of a layer of metasurface, multi-layered magnetic substrate, a layer of fragmented magnetic structure obtained by improved MOEA/D-GO (Multi-Objective Evolutionary Algorithm based on Decomposition combined with Enhanced Genetic Operators), and a copper back plate. The absorber is achieved by two steps. First, we designed and measured an ultra-thin absorber at 0.78–2.04 GHz by adding a layer metasurface onto the top of a basic multi-layer absorber composed of magnetic materials. The fractional bandwidth (FBW) of the absorber is 89.4%, and the electrical thickness is only 0.024 λ 0 at the lowest operating frequency. Second, to broaden the bandwidth, we use an improved MOEA/D-GO to optimize one magnetic layer of the absorber. The working frequency band of the optimized absorber is 1–5.34 GHz, covering L- (1–2 GHz), S- (2–4 GHz), and partial C-bands (4–8 GHz). Furthermore, we modified the structure of the metasurface to make the absorber polarization-independent. The FBW of the final absorber is 136.4%, and the electrical thickness is 0.031 λ 0 at the lowest operating frequency. The prototype of the absorber is measured, and the experimental results agree well with the simulated performance. The results show that the improved MOEA/D-GO can be used to design and optimize sophisticated electromagnetic (EM) structures with the predesigned properties, and the absorber with ultrathin thickness and light weight verified in this paper have great application potentials in EM compatibility, EM shielding, and radar cross section reduction at the low bands of the microwave spectrum. [ABSTRACT FROM AUTHOR]

In this paper, we explore the molecular basis of combining photodynamic therapy (PDT), a light-triggered targeted anticancer therapy, with the traditional chemotherapeutic properties of the well-known cytotoxic agent gemcitabine. A photosensitizer prerequisite is significant absorption of biocompatible light in the visible/near IR range, ideally between 600 and 1000 nm. We use highly accurate multiconfigurational CASSCF/MS-CASPT2/MM and TD-DFT methodologies to determine the absorption properties of a series of gemcitabine derivatives with the goal of red-shifting the UV absorption band toward the visible region and facilitating triplet state population. The choice of the substitutions and, thus, the rational design is based on important biochemical criteria and on derivatives whose synthesis is reported in the literature. The modifications tackled in this paper consist of: (i) substitution of the oxygen atom at O2 position with heavier atoms (O → S and O → Se) to red shift the absorption band and increase the spin–orbit coupling, (ii) addition of a lipophilic chain at the N7 position to enhance transport into cancer cells and slow down gemcitabine metabolism, and (iii) attachment of aromatic systems at C5 position to enhance red shift further. Results indicate that the combination of these three chemical modifications markedly shifts the absorption spectrum toward the 500 nm region and beyond and drastically increases spin–orbit coupling values, two key PDT requirements. The obtained theoretical predictions encourage biological studies to further develop this anticancer approach. [ABSTRACT FROM AUTHOR]

Alternating current (ac) losses in conductor-on-rounded-core (CORC) cables of YBCO high-temperature superconducting (HTS) tapes are a significant challenge in HTS power applications. This study employs two finite element analysis (FEA) models to investigate the contributions from different ac loss components and provide approaches for reducing ac losses in cables. An FEA model based on the T-A formulation treats the cross section of thin superconducting layers as 1D lines and, therefore, only can predict the ac loss generated by the perpendicular magnetic field. In contrast, the model based on H-formulation can be performed on the actual 2D rectangular cross section HTS tapes to provide the total ac losses generated by magnetic fluxes penetrating from both the edges and surfaces of HTS tapes, although this model requires more computing time and memory. The 1D and 2D simulation models were validated by cross comparing the results from both models and by comparing sub-section and full cross section models. Subsequently, two models relate cable design and operational parameters to the surface and edge losses of a two-layer CORC cable by considering the (1) relative contributions of edge and surface losses to the overall ac losses; (2) effect of the current distribution between inner and outer HTS layers on ac losses; (3) impact of the tape alignment on ac losses in each HTS layer; (4) influence of the thickness of HTS layers on ac losses; (5) effect of size and number of inter-tape gaps on ac losses; and (6) contribution frequency on the ac losses. The research results given in this paper are therefore not only valuable to suggest strategies for reducing ac loss in multi-layer cables but also for developing more accurate and effective methods to calculate ac loss in CORC HTS cables. [ABSTRACT FROM AUTHOR]

Frequency Domain Spectroscopy (FDS) is widely used to estimate oil–paper insulation. The high moisture and long aging change the FDS characteristics of the insulating oil–paper, so normalization processing is required. Still, the choice of single activation energy needs further research. This paper studies the FDS characteristic of oil–paper insulation samples with different moisture and aging degrees and improves the traditional temperature correction method. The enhanced Arrhenius model uses the segmented activation energy to make the normalized FDS curve coincide better with the target curve, and the error is reduced. In addition, to verify the method's effectiveness, this paper proposes an iterative correction process. It corrects the tan δ-f curve of the bushing with an aging time of 800 h based on segmented activation energy, and the overall normalization effect is improved. [ABSTRACT FROM AUTHOR]

Gas gun shock experiments on cyclotrimethylenetrinitramine (RDX)-based explosive compositions that employ embedded gauge particle velocity tracers have noted a significant amount of electrical noise when compared to other explosive formulations. This paper reexamines previously published embedded gauge data on Cyclotols (60–80 wt. % RDX) to quantify the electromagnetic behavior of these materials. The primary observation is a fourfold increase in the electrical noise when Cyclotols are shocked above 4.22 ± 0.08 GPa. Electromagnetic gauge noise is also observed within particle velocity traces in reactive growth and off-Hugoniot shocks, although at higher pressures than the direct shock case, suggesting a temperature- or kinetically dependent transition. In all cases, the electrical noise disappears upon detonation. By comparing with the static high-pressure phase diagram of RDX, we interpret this change in electromagnetic behavior to be a change in the RDX crystal structure to a piezoelectric phase, although it is uncertain whether the γ or ε phase is responsible for the observed behavior. [ABSTRACT FROM AUTHOR]

Chemical shakers are active particles with zero propulsion velocity whose activity derives from chemical reactions on portions of their surfaces. Although they do not move, except through Brownian motion, the nonequilibrium concentration and velocity fields that they generate endow them with properties that differ from their equilibrium counterparts. In particular, collections of such shakers can actively move, reorient, and self-assemble into various cluster states, which are the subject of this paper. Elongated chemical shakers constructed from linked catalytic and noncatalytic spheres are considered, and it is shown how hydrodynamic, chemotactic, and shape-dependent interactions give rise to various self-assembled shaker structures. The chemical forces responsible for cluster formation are described in terms of a model based on pair-wise additive contributions. The forms of the self-assembled structures can be varied by changing the chemostat concentrations that control the nonequilibrium state. The resulting structures and their manipulation through chemical means suggest ways to construct a class of active materials for applications. [ABSTRACT FROM AUTHOR]

Packaging insulation materials with high thermal conductivity and excellent dielectric properties are favorable to meet the high demand and rapid development of third generation power semiconductors. In this study, we propose to improve the thermal conductivity of epoxy resin (EP) by incorporating a three-dimensional boron nitride thermally conductive network. Detailedly, polyurethane foam (PU) was used as a supporter, and boron nitride nanosheets (BNNSs) were loaded onto the PU supporter through chemical bonding (BNNS@PU). After immersing BNNS@PU into the EP resin, EP-based thermally conductive composites were prepared by vacuum-assisted impregnation. Fourier transform infrared spectrometer and scanning electron microscope were used to characterize the chemical bonding and morphological structure of BNNS@PU, respectively. The content of BNNS in BNNS@PU/EP composites was quantitatively analyzed by TGA. The results show that the thermal conductivity of the BNNS@PU/EP composites reaches 0.521 W/m K with an enhancement rate η of 30.89 at an ultra-low BNNS filler content (5.93 wt. %). Additionally, the BNNS@PU/EP composites have excellent dielectric properties with the frequency range from 101 to 106 Hz. This paper provides an interesting idea for developing high thermal conductivity insulating materials used for power semiconductor packaging. [ABSTRACT FROM AUTHOR]

This paper explores the unintentional contamination of Surface-Enhanced Raman Scattering (SERS) substrates by ambient hydrocarbon contaminants and their contribution to SERS spectra. Previous studies have identified amorphous carbon as a potential complicating factor in data analysis in SERS experiments, although its origin has been elusive. Our work showed that ambient hydrocarbon contamination and its decomposition products can be detected by SERS on a gold substrate. We propose that ambient air itself is a source of amorphous carbon contamination on SERS substrates. This understanding is crucial for the correct interpretation of SERS data and highlights the need for careful consideration of potential environmental contaminants in SERS analysis. [ABSTRACT FROM AUTHOR]

Semiconductor nanocrystals (NCs) can function as efficient gain materials with chemical versatility because of their surface ligands. Because the properties of NCs in solution are sensitive to ligand–environment interactions, local chemical changes can result in changes in the optical response. However, amplification of the optical response is technically challenging because of colloidal instability at NC concentrations needed for sufficient gain to overcome losses. This paper demonstrates liquid lasing from plasmonic lattice cavities integrated with ligand-engineered CdZnS/ZnS NCs dispersed in toluene and water. By taking advantage of calcium ion-induced aggregation of NCs in aqueous solutions, we show how lasing threshold can be used as a transduction signal for ion detection. Our work highlights how NC solutions and plasmonic lattices with open cavity architectures can serve as a biosensing platform for lab-on-chip devices. [ABSTRACT FROM AUTHOR]

The current focus in Autonomous Experimentation (AE) is on developing robust workflows to conduct the AE effectively. This entails the need for well-defined approaches to guide the AE process, including strategies for hyperparameter tuning and high-level human interventions within the workflow loop. This paper presents a comprehensive analysis of the influence of initial experimental conditions and in-loop interventions on the learning dynamics of Deep Kernel Learning (DKL) within the realm of AE in scanning probe microscopy. We explore the concept of the "seed effect," where the initial experiment setup has a substantial impact on the subsequent learning trajectory. Additionally, we introduce an approach of the seed point interventions in AE allowing the operator to influence the exploration process. Using a dataset from Piezoresponse Force Microscopy on PbTiO3 thin films, we illustrate the impact of the "seed effect" and in-loop seed interventions on the effectiveness of DKL in predicting material properties. The study highlights the importance of initial choices and adaptive interventions in optimizing learning rates and enhancing the efficiency of automated material characterization. This work offers valuable insights into designing more robust and effective AE workflows in microscopy with potential applications across various characterization techniques. [ABSTRACT FROM AUTHOR]

A novel bilateral impact-ionization-avalanche-transit-time (BIMPATT) diode based on AlGaN/GaN two-dimensional electron gas is proposed in this article. The BIMPATT is compatible with the available GaN high electron mobility transistor (HEMT) manufacturing process and has a shorter actual electron transit distance than existing HEMT-like IMPATT (HIMPATT) diodes. Compared with the same-sized HIMPATT, the optimum frequency of BIMPATT rises from 320 to 420 GHz and possesses a far wider operating frequency band, especially in the near 0.9 THz range. The maximum DC-RF conversion efficiency rises from 12.9% to 17.6%. The maximum RF power of BIMPATT is 3.18 W/mm, which is similar to 3.12 W/mm of the HIMPATT. Furthermore, our simulation demonstrated that the characteristics of BIMPATT are significantly affected by the length of anode and the thickness of the AlGaN barrier layer. The effects of ohmic contact resistance and background impurities on BIMPATT are also taken into account. This paper provides a reference for the design and characteristics enhancement of the lateral IMPATT devices. [ABSTRACT FROM AUTHOR]

In this paper, we have studied the effect on the structure and magnetic properties of partial Pd substitution by Gd in Fe–Pd thin films of nominal composition Fe56Pd44−xGdx (x = 1, 3, 5, and 7), deposited onto Si(100) and Si(100)/SiO2 substrates by thermal evaporation. Several techniques contribute to the characterization of their microstructure and magnetic properties, such as x-ray diffraction (XRD), scanning electron microscopy, alternating gradient field magnetometry, and magnetic force microscopy (MFM). X-ray diffraction shows that the as-deposited films are either amorphous or contain a disordered FePd phase, depending on the film thickness. The transformation of disordered fcc-FePd into ordered fct-FePd has been induced by a heat treatment at 530 °C for 4 h. The addition of gadolinium leads to a reduction in the coercivity as a consequence of the emergence of soft phases and of the progressive reduction of the fct-FePd phase, which is primarily responsible for the observed maze magnetic domains. The exchange coupling between the soft phase and the hard fct-FePd phase is demonstrated by first-order reversal curves (FORCs). [ABSTRACT FROM AUTHOR]

This paper describes a three-step process to remediate surface and sub-surface defects on chemo-mechanically polished SiC surfaces. In this process, a CF4-based inductively coupled plasma with reactive ion etch was used to remove material to a depth, which is unaffected by surface and subsurface polishing damage. This produced a planarized but carbon-rich fluorinated surface. This surface was then exposed to a 2 min rapid thermal oxidation in air at 1000 °C to oxidize and volatilize the excess carbon and fluorinated species, respectively. The resulting surface oxide was then stripped using a dilute hydrofluoric acid in water solution. This process, referred to as plasma assisted remediation, reproducibly yielded planarized, stoichiometric surfaces with low levels of carbon and oxygen contamination suitable for subsequent device fabrication. In the supporting studies described here, 4H- and 6H-SiC(0001) surfaces were remediated and characterized by x-ray photoelectron spectroscopy and atomic force microscopy at each stage of the process. Experimental studies under ion-rich and radical-dominant conditions are also reported which provide greater insight into the underlying chemistry and physics of the process. [ABSTRACT FROM AUTHOR]

Optical eigenstates with a high quality (Q) factor provide substantial advantages for a broad spectrum of optical devices, particularly those demanding strong light–matter interactions. Recently, it has been demonstrated that ultrahigh- Q resonances can be realized in planar photonic structures by merging multiple bound states in the continuum (BICs) in the momentum space. Photonic lattices with thin-film geometry are known to support abundant TE-polarized and TM-polarized BICs. While prior research has explored the merging of TE-polarized BICs, this paper presents analytical and numerical results concerning the merging of TM-polarized BICs in laterally periodic one-dimensional photonic lattices. As the thickness of photonic lattices increases, TM-polarized accidental BICs descend along the dispersion curves and eventually merge at the upper edge of the second stop band. Employing coupled-mode analysis, we calculate the analytical merging thickness at which multiple TM-polarized BICs come together at the second-order Γ point. We confirm the merging of TM-polarized BICs through finite-element method simulations. Our results can be beneficial for achieving ultrahigh- Q resonances through the merging of BICs. [ABSTRACT FROM AUTHOR]

In this paper, the responses of assembled behaviors of block polyelectrolytes (PEs) to the strength of electrostatic interactions are studied through molecular dynamic simulations. The results show that the assembled structures closely depend on the electrostatic strength. It should be noted that PE coacervation can outweigh the nucleation of hydrophobic blocks and invert the micelle structures at strong electrostatic strengths, leading to the formation of inverted micelles of PE cores and hydrophobic coronas. In the poor solvent condition for neutral block, diverse anisotropic micelles are presented; candy-like conventional micelles of hydrophobic cores and PE patches coexist with inverted candy-like micelles of PE cores and hydrophobic patches and with Janus micelles of semi-neutral aggregate and semi-PE cluster in the presence of divalent and trivalent counterions. The formation of conventional or inverted micelle is largely determined by the type of micellar fusion, which results from the nucleation competition between electrostatic correlation and hydrophobic interaction. The merge of micelles mediated by hydrophobic attraction leads to conventional hydrophobic cores, and the fusion induced by electrostatic correlations results in PE cores micelles. At strong electrostatic strengths, the PE chains exhibit rich conformations at trivalent counterions, ranging from a fully collapsed state to a rod-like state, and parallel alignment of PE chains is found. [ABSTRACT FROM AUTHOR]

Ion channels are proteins that play a significant role in physiological processes, including neuronal excitability and signal transduction. However, the precise mechanisms by which these proteins facilitate ion diffusion through cell membranes are not well understood. This is because experimental techniques to characterize ion channel activity operate on a time scale too large to understand the role of the various protein conformations on diffusion. Meanwhile, computational approaches operate on a time scale too short to rationalize the observed behavior at the microscopic scale. In this paper, we present a continuous-time random walk model that aims to bridge the scales between the atomistic models of ion channels and the experimental measurement of their conductance. We show how diffusion slows down in complex systems by using 3D lattices that map out the pore geometry of two channels: Nav1.7 and gramicidin. We also introduce spatial and dynamic site disorder to account for system heterogeneity beyond the mean field approximation. Computed diffusion coefficients show that an increase in spatial disorder slows down diffusion kinetics, while dynamic disorder has the opposite effect. Our results imply that microscopic or phenomenological models based on the potential of mean force data overlook the functional importance of protein dynamics on ion diffusion through channels. [ABSTRACT FROM AUTHOR]

Measurement of coating–substrate interface stiffness can indirectly characterize interface bonding quality. This paper proposes a noval quantitative inversion coating–substrate interface stiffness method based on the multi-resonance frequencies of a constructed ultrasonic echo phase derivative spectrum (UEPDS). The theoretical relationship between UEPDS resonance frequencies and interface stiffness is derived. The detection frequency and high-sensitivity interface stiffness range are optimized based on the sensitivity analyzed. Numerical simulation and experiment are implemented on a 0.48 mm aluminum layer/carbon steel substrate specimen to prove the validity of the proposed ultrasonic method. The simulation results show that the maximal relative error between the inversion and the preset interface stiffnesses is reduced from 23% to 8% compared with the traditional ultrasonic reflection coefficient amplitude spectrum-based (URCAS-based) method. The experiment results indicate that the UEPDS-based inversion interface stiffnesses have the same trend as the nominal contact pressures between the coating–substrate interface. [ABSTRACT FROM AUTHOR]

In this paper, the p-GaN gate AlGaN/GaN high electron mobility transistors (HEMTs) with varying combinations of gate metal work function and gate geometry are fabricated and investigate the influence of gate leakage current (IGS) on the threshold voltage (VTH) and subthreshold swing (SS). The unique dependence of VTH and SS on gate geometry for different metals is observed, which is different from traditional field-effect transistors. A novel hybrid physics model, consisting of the traditional capacitance divider model and hole injection model, is proposed to explain this phenomenon, and the results exhibit an excellent agreement with the experimental data. The holes traverse the gate/p-GaN Schottky barrier by thermal emission or tunneling and inject into the p-GaN layer, generating the IGS. Expanding upon the traditional capacitance divider model, a portion of the injected holes accumulate at the p-GaN/AlGaN interface and induce the corresponding electrons at the AlGaN/GaN heterojunction, which promotes channel conduction. Hence, the transfer curves display the correlation between IGS and VTH as well as SS. The results show that high IGS can alleviate the instability of VTH caused by the lithographic overlay error, and simultaneously optimize SS. This work offers a novel perspective for examining the turn-on mechanism of p-GaN HEMTs, thereby contributing to device design. [ABSTRACT FROM AUTHOR]

In this paper, the high-quality factor mullite microwave dielectric ceramic is employed to introduce in dielectric resonator antenna (DRA). The microwave dielectric properties of ɛr ∼ 5.8, Q × f ∼ 31 240 at 9.66 GHz, and loss tangent tanδ = 1/Q ∼ 2.7 × 10−4 can be obtained by the solid-state reaction method in mullite microwave dielectric ceramic sintered at 1700 °C. On this basis, the resonant modes of the proposed broadband high-gain rectangular DRA are analyzed by using a dielectric waveguide theoretical model and the antenna performance is evaluated by a commercial CST Microwave Studio 2021® software. It has been found that the proposed rectangular DRA can provide a broad bandwidth of 35.9%, a maximum gain of 10 dBi at 3.61 GHz, and a radiation efficiency of 90% in the range of 3.13–4.42 GHz. For demonstration, adequate consistency between the simulation results and the measurement results was achieved. The proposed DRA has great application potential and value in 5G communication scenarios requiring wideband and high-gain antenna. [ABSTRACT FROM AUTHOR]

The microstructure morphology, static magnetic properties, and electromagnetic absorption characteristics of nano FexCoNi alloy particles prepared by chemical liquid deposition with five different Fe content levels are investigated in this paper. The results show that spherical FexCoNi alloy particles with an average particle size of about 100–200 nm and a face-centered cubic crystal structure were obtained. All five samples exhibited soft magnetic behavior, with the saturation magnetization intensity showing an increasing-then-decreasing trend with increasing Fe content, peaking at 141.8 emu/g for Fe content x = 1.0. The dielectric constants (real and imaginary parts) of the prepared alloy particles exhibit significant differences with respect to the variation of Fe content, while the changes in the real and imaginary parts of the magnetic permeability show less pronounced effects with increasing Fe content. As the electromagnetic wave frequency increases, the real parts of the dielectric constants for all composites show minimal fluctuations, and the real parts of the magnetic permeability exhibit a decreasing trend. Moreover, the imaginary parts of the dielectric constants and magnetic permeability show an increasing followed by a decreasing trend as the frequency rises. The material with Fe content x = 1 demonstrated optimal dielectric loss performance and relatively excellent magnetic loss performance, with a sample thickness of 1.9 mm exhibiting the highest reflection loss (RLmax) of −24.2 dB and an effective absorption bandwidth of 4.48 GHz. [ABSTRACT FROM AUTHOR]

This paper proposes a phase unwrapping method based on ternary Gray code in fringe projection profilometry. This method does not require additional projection images or any prior knowledge. It accurately determines the segmentation thresholds of the ternary Gray code using only the average intensity and intensity modulation calculated from phase-shifting fringes, effectively reducing projection costs and achieving lower codeword errors. Additionally, a segment selection strategy suitable for the ternary Gray code is proposed. By employing the complementary method, three sets of candidate orders with certain codeword shifts can be generated. The wrapped phase is then divided into three segments: upper, middle, and lower segments, and correspondingly matched with the central regions of the three sets of candidate orders, thus enabling the solution of the absolute phase. Through the segment selection strategy, error-prone areas at the edges of orders are effectively avoided, further enhancing the accuracy of measurement results. Compared to the binary Gray code, the ternary complementary Gray code can encode up to 3 m − 1 orders when the number of Gray code patterns is m; when the required number of encoding orders is K, only ⌈ log 3 K ⌉ + 1 Gray code patterns are needed. Its additional value capacity precisely enables it to encode more orders, thereby increasing the frequency of phase-shifting fringes and further enhancing measurement efficiency. A series of experiments validates the feasibility, robustness, and superiority of this method. [ABSTRACT FROM AUTHOR]

Optical metasurfaces can be used to realize various peculiar optical effects, and their mechanisms of the controlling optical phase can be roughly categorized into three types: resonant phase, geometric phase, and propagation phase, also known as the dynamic phase. Multiple mechanisms can be employed to manipulate the phase and amplitude of one metasurface. Therefore, discovering more profound and diverse methods can provide additional degrees of application freedom. This paper proposes a control principle based on electric multipole expansion. We found that for a unit structure formed by dual-metal bars on a metasurface, the radiation of its dipole is equivalent to the interference results of the dual-metal bars. Moreover, the radiation of the quadrupole enables independent control for amplitude and phase. Therefore, we used quadrupole radiation to manipulate the phase and amplitude of the light and even investigated some simple applications, including the realization of focusing light and anomalous refraction. Such a new mechanism of controlling light, combined with other methods, can provide significant insights into achieving challenging goals, like steganography and multifunctional metasurfaces. [ABSTRACT FROM AUTHOR]

With the development of science and technology and the appearance of various special conditions that cause signers to be unable to sign, proxy signature is gradually becoming a hot spot in cryptography research. This paper combines proxy signature, quantum teleportation, and multi-party verification and proposes a multi-party verifiable quantum proxy signature scheme based on quantum teleportation. This scheme has the following characteristics: The authentication method based on the H a s h function can effectively solve the problem of identity identification among members; in order for the proxy signer to be able to verify the correctness of the proxy authorization, a form of proxy signature authorization that concatenates the identity information of the original signer is used. The security analysis shows that our scheme is unforgeable and undeniable and can resist intercept-resend attacks and cheating attacks. [ABSTRACT FROM AUTHOR]

The introduction of metasurfaces has renewed Snell's law, and the metasurfaces can manipulate sound waves flexibly. In this paper, a coding metasurface with a simple and adjustable coding unit for sound wave transmission is proposed. By changing the orientation of a movable part in a fixed structure, conversion is achieved between two types of units with a phase difference of 180° and high transmittance (>75%). By combining the two types of units, the phases of sound waves can be regulated dynamically. Structural simulations are performed using finite-element software, and the beam splitting of the transmitted sound wave is verified by theoretical analysis and experiments under plane wave incidence in the frequency range of 4.7–5.7 kHz. In addition, the two types of units are used to design a coding Fresnel lens, and its simulated focusing performance is verified by experiments at 4.7–5.7 kHz. [ABSTRACT FROM AUTHOR]