Search

The effect of the growth temperature and the flow of trimethylgallium on the process of selective epitaxy of gallium nitride in windows of submicron size have been studied. The conditions under which homogeneous nucleation and coalescence of nuclei are combined with a low growth rate are determined. The steady growth of variously oriented gallium nitride strips with a height of 50 nm and a width of 600 nm was realized. [ABSTRACT FROM AUTHOR]

Abstract: The selective epitaxial growth of GaN by metalorganic vapor-phase epitaxy combined with ion-beam etching is investigated. To this end, partially masked GaN epitaxial layers are fabricated by depositing a thin Si3N4 layer onto the surface in a single technological process with the growth of GaN and the subsequent opening of windows of different shapes in this layer by an ion beam. Selective epitaxial growth regimes are studied. It is shown that, in a situation where the total area of the windows in the mask is small relative to the total area of the sample, the required epitaxy duration should be 5-10 s, which impairs the reproducibility of the parameters of the epitaxial process. It is also shown that the mechanism of the selective growth of submicrometer objects differs significantly from that for planar layers and selectively grown layers with dimensions of ~1 μm or greater. The effect of precursor (trimethylgallium and ammonia) fluxes on the character of selective epitaxy is examined. To investigate the possibilities of varying mask topology for fabricating model objects with regard to photonic crystals, the impact of the shape and orientation of the windows in the Si3N4 mask on the character of selective epitaxy is studied. [ABSTRACT FROM AUTHOR]

A possible solution for the realization of high-efficiency visible light-emitting diodes (LEDs) exploits InGaN-quantum-dot-based active regions. However, the role of local composition fluctuations inside the quantum dots and their effect of the device characteristics have not yet been examined in sufficient detail. Here, we present numerical simulations of a quantum-dot structure restored from an experimental high-resolution transmission electron microscopy image. A single InGaN island with the size of ten nanometers and nonuniform indium content distribution is analyzed. A number of two- and three-dimensional models of the quantum dot are derived from the experimental image by a special numerical algorithm, which enables electromechanical, continuum k → · p → , and empirical tight-binding calculations, including emission spectra prediction. Effectiveness of continuous and atomistic approaches are compared, and the impact of InGaN composition fluctuations on the ground-state electron and hole wave functions and quantum dot emission spectrum is analyzed in detail. Finally, comparison of the predicted spectrum with the experimental one is performed to assess the applicability of various simulation approaches. [ABSTRACT FROM AUTHOR]

Optical and light-emitting diode structures with an active InGaN region containing short-period InGaN/GaN superlattices are studied. It is shown that short-period superlattices are thin two-dimensional layers with a relatively low In content that contain inclusions with a high In content 1–3 nm thick. Inclusions manifest themselves from the point of view of optical properties as a nonuniform array of quantum dots involved in a residual quantum well. The use of short-period superlattices in light-emitting diode structures allows one to decrease the concentration of nonradiative centers, as well as to increase the injection of carriers in the active region due to an increase in the effective height of the AlGaN barrier, which in general leads to an increase in the quantum efficiency of light-emitting diodes. [ABSTRACT FROM AUTHOR]

A new approach to development of effective monolithic white-light emitters is described based on using a short-period InGaN/GaN superlattice as a barrier layer in the active region of LED structures between InGaN quantum wells emitting in the blue and yellow-green spectral ranges. The optical properties of structures of this kind have been studied, and it is demonstrated that the use of such a superlattice makes it possible to obtain effective emission from the active region. [ABSTRACT FROM AUTHOR]

The structural and optical properties of light-emitting diode structures with an active region based on ultrathin InGaN quantum wells limited by short-period InGaN/GaN superlattices from both sides have been investigated. The dependences of the external quantum efficiency on the active region design are analyzed. It is shown that the use of InGaN/GaN structures as limiting graded-gap short-period superlattices may significantly increase the quantum efficiency. [ABSTRACT FROM AUTHOR]

We exploit the three-dimensional (3D) character of the strain field created around InGaN islands formed within the multilayer structures spaced by a less than 1-nm-thick GaN layer for the creation of spatially correlated electronically coupled quantum dots (QDs). The laterally inhomogeneous vertical out-diffusion of In atoms during growth interruption is the basic mechanism for the formation of InGaN islands within as-deposited 2D layers. An anisotropic 3D strain field created in the first layer is sufficient to justify the vertical correlation of the islands formed in the upper layers spaced by a sufficiently thin GaN layer. When the thickness of a GaN spacer exceeds 1 nm, QDs from different layers under the same growth conditions emit independently and in the same wavelength range. When extremely thin (less than 1 nm), a GaN spacer is formed solely by applying short GI, and a double wavelength emission in the blue and green spectral ranges evidences the electromechanical coupling. With k → · p → calculations including electromechanical fields, we model the optoelectronic properties of a structure with three InGaN lens-shaped QDs embedded in a GaN matrix, with three different configurations of In content. The profiles of the band structures are strongly dependent on the In content arrangement, and the quantum-confined Stark effect is significantly reduced in a structure with an increasing gradient of In content from the top to the bottom QD. This configuration exhibits carrier tunneling through the QDs, an increase of wave functions overlap, and evidence emerges of three distinct peaks in the spectral range. [ABSTRACT FROM AUTHOR]

We study the formation of a superradiant optical mode in the room temperature reflection spectra from resonant Bragg structures (RBSs) composed of single and double (In,Ga)N quantum wells (QWs) in the unit cell. The appearance of the mode manifests itself by a significant increase in the resonant optical reflectivity due to the electromagnetic coupling of quasi-two-dimensional excitons in the QWs. The implementation of the supercells with double (In,Ga)N QWs results in an increase in the oscillator strength of the quasi-2D excitons and corresponding rise of the radiative broadening parameter to the value as high as 0.3 ± 0.02 meV. We also show that the supercells with double QWs are preferable for RBS with large number of periods due to better tolerance to deviations from the exact periodicity. [ABSTRACT FROM AUTHOR]

Elastic stresses in AlN layers on silicon substrates of different thickness, as well as in multilayer (Al, Ga)N structures grown on AlN/Si templates, were investigated based on in-situ reflectometry/deflectometry data. It was found that tensile stresses arise during the growth of AlN, with their magnitude increasing with thicker the substrate. During the growth of multilayer step-graded (Al, Ga)N structures, all layers underwent compressive stress which decreased towards the surface. After cooling the structures to room temperature, some of the lower AlGaN layers remained entirely compressed, while another part experienced both compressive (in the lower part of each layer) and tensile (in the upper part of each layer) stresses. [ABSTRACT FROM AUTHOR]

Study of Ga2O3 deposition by MOVPE using trimethylgallium and oxygen was performed in a wide temperature range. It was found that for Ga2O3 deposition rate vs temperature dependence is very close to the TMGa pyrolysis in nitrogen. Kinetically-limited range for these processes corresponds to 550–700°C, that is 150°C higher, then for GaN deposition in the same reactor. [ABSTRACT FROM AUTHOR]

We experimentally demonstrate the formation of a superradiant optical mode in the room-temperature reflection spectra from a resonant Bragg structure composed of 30 equidistant GaN quantum wells separated by (Al,Ga)N barriers. The mode arises when the condition of the Bragg diffraction is fulfilled at the wavelength corresponding to the energy of the quasi-two-dimensional excitons in the quantum wells. It manifests itself as a significant increase in the amplitude and a change in the shape of the resonant optical reflection due to the electromagnetic coupling of the excitons. By modeling of the optical spectra, we evaluate the radiative and non-radiative broadening parameters of the excitonic states in the GaN quantum wells, which appear to be 0.4 ± 0.02 and 40 ± 5 meV, correspondingly, for the resonant exciton energy of 3.605 eV. The resonant Bragg structure based on the periodic sequence of the GaN quantum wells demonstrates an efficient coupling of photons and excitons at room temperature, which makes it promising for device applications. [ABSTRACT FROM AUTHOR]

A complex study was performed on a set of AlGaN/GaN high-electron-mobility transistor structures grown by metalorganic vapor phase epitaxy on miscut Si(111) wafers with a highly resistive epitaxial Si layer to investigate the influence of substrate miscut on their properties. The results showed that wafer misorientation had an influence on the strain evolution during the growth and surface morphology, and could have a strong impact on the mobility of 2D electron gas, with a weak optimum at 0.5° miscut angle. A numerical analysis revealed that the interface roughness was a main parameter responsible for the variation in electron mobility. [ABSTRACT FROM AUTHOR]

Terahertz radiation emission from an electrically excited AlGaN/GaN heterostructure with a surface metal grating was studied under conditions of two-dimensional (2D) electron heating by the lateral electric field. Intensive peaks related to nonequilibrium 2D plasmons were revealed in the terahertz emission spectra with up to 4 times selective amplification of the radiation emission in the vicinity of 2D plasmon resonance. This selective emission was shown to be frequency-controllable by the grating period. Exact spectral positions of the 2D plasmon resonances were preliminarily experimentally detected with the help of equilibrium transmission spectra measured at various temperatures. The resonance positions are in a satisfactory agreement with the results of theoretical simulation of the transmission spectra performed using a rigorous solution of Maxwell's equations. The effective temperature of hot 2D electrons was determined by means of I – V characteristics and their analysis using the power balance equation. It was shown that for a given electric field, the effective temperature of nonequilibrium 2D plasmons is close to the hot 2D electron temperature. The work may have applications in GaN-based electrically pumped emitters of terahertz radiation. [ABSTRACT FROM AUTHOR]

Laser-assisted atom probe tomography (APT) and high-resolution dark-field electron holography (HR-DFEH) were performed to investigate the composition of a polar [0001] GaN/AlxGa1 − xN/InyGa1 − yN light emitting diode. In particular, the III-site fraction of both AlxGa1 − xN and InyGa1 − yN alloys was studied adopting a comparative approach. HR-DFEH allows mapping the projected strain with a subnanometer spatial resolution which is used for the calculation of the two-dimensional alloy composition distribution. APT provides three-dimensional alloys composition distribution with a nanometer spatial resolution. However, here we reveal that important inaccuracies affect local composition measurements. A Ga-poor composition is obtained in high DC-electric field regions. Moreover, such inaccuracies may be locally enhanced where the [0001] pole intersects the surface of the analyzed specimen, leading to a lower fraction of Ga measured. III-site fractions closer to the nominal values were measured at low field conditions. Ga loss is thought to be due to preferential DC field induced evaporation of Ga ions between laser pulses. This is explained in terms of formation of a metallic layer on the tip surface during APT analysis, where weak Ga-Ga bonds are formed, promoting the loss of Ga at high field conditions. [ABSTRACT FROM AUTHOR]

The results of the study of the influence of Fe segregation into the unintentionally doped GaN channel layer in AlGaN/AlN/GaN heterostructures with Fe-doped GaN buffer layer on the electrical properties of two-dimensional electron gas are presented. A set of several samples was grown by metal-organic vapor-phase epitaxy and characterized by the van der Pauw method. The dependence of concentration and mobility of the two-dimensional electron gas on the channel layer thickness was analyzed theoretically by self-consistent solving of 1D Poisson and Schrödinger equations and scattering rate calculations within the momentum relaxation time approximation. It was found that both concentration and mobility decreases were responsible for the increase in the sheet resistance in the structures with a thinner channel layer, with a drop in mobility being not only due to ionized impurity scattering, but also due to a combined effect of weakening of screening, lower carrier energy and change in form-factors on scattering by interface roughness, dislocations and polar optical phonons. [ABSTRACT FROM AUTHOR]

We study a disorder-induced transformation of the resonant optical reflection from a nearly periodic system of quasi-2D excitons in the InGaN quantum wells arranged as a resonant Bragg structure (RBS). We show that there is a critical deviation from the exact periodicity when the reflection by a single super-radiant exciton–polariton mode is transformed into a multimode spectrum. This critical disorder appears to be inversely proportional to the number of periods in the RBS. Using a numerical model which describes the experimentally observed optical spectra, we found the critical standard deviation from exact periodicity to be 1.76%, 1.0%, and 0.45% for InGaN-based RBS with 60, 100, and 200 periods, respectively. [ABSTRACT FROM AUTHOR]

We studied the optical properties of periodic InGaN/GaN multiple quantum well systems with different numbers of periods. A resonant increase in the optical reflection and simultaneous suppression of the optical absorption have been revealed experimentally at room temperature when the Bragg and exciton resonances were tuned to each other. Numerical modeling with a single set of parameters gave a quantitatively accurate fit of the experimental reflection and transmission spectra in a wide wavelength range and various angles of the light incidence. The model included both exciton resonance and non-resonant band-to-band transitions in the InGaN quantum wells, as well as Rayleigh light scattering in the GaN buffer layer. The analysis also involved x-ray diffraction and photoluminescence data. It allowed us to determine the key parameters of the structure. In particular, the radiative broadening of the InGaN QW excitons was evaluated as 0.20 ± 0.02 meV. [ABSTRACT FROM AUTHOR]

A technique and technology for manufacturing both LED chips and packaged LEDs from AlInGaN/GaN heterostructures grown on novel SiC/Si substrates synthesized by the method of matched substitution of atoms is described. We have studied the current-voltage characteristics, electroluminescence spectra, and dependence of output power and external quantum efficiency on the current. It is shown that the presence of pores in the SiC/Si substrate, which are naturally formed during its growth, leads to a significant increase in the quantum efficiency of LEDs compared with the quantum efficiency of LEDs fabricated on silicon without a SiC sublayer. [ABSTRACT FROM AUTHOR]

The optical properties of a structure with a periodic system of 100 InGaN quantum wells separated by nontunneling GaN barriers are investigated at room temperature. The structure periodicity corresponds to the Bragg-diffraction condition at the quantum-well exciton frequency. The results of numerical simulation using transfer matrices are in reasonable quantitative agreement with the experimental data. The model includes the resonance response of A, B, and C excitons in the quantum wells and the optical absorption tail in the barrier and buffer layers. The radiative and nonradiative damping rates of excitons in the InGaN quantum wells are determined. [ABSTRACT FROM AUTHOR]

We present a new approach for synthesis of GaN nanowires and microwires by metal organic chemical vapor deposition via a thin titanium film evaporated onto sapphire substrate prior to growth. Titanium etches a two-dimensional GaN layer deposited at the initial stage and GaN nanowires subsequently emerge at the boundaries of the etched grains. These wires grow at an exceptional elongation rate of 18 μm/min and extend radially at a rate of 0.14 μm/min. The GaN layer between the wires grows at a rate of 0.1 μm/min. High material quality of these structures is confirmed by micro-photoluminescence spectroscopy. We investigate the initial nucleation stage, the time evolution of the wire length and diameter, the length and diameter distributions and speculate about a mechanism that yields the observed growth behavior. [ABSTRACT FROM AUTHOR]

We have studied the growth of GaN layers by the metalorganic vapor phase epitaxy (MOVPE) on sapphire substrates at various reactor pressures, including ones above the atmospheric level. It is established that the epitaxial growth at higher pressures does not affect the crystalline perfection of epilayers, their electron mobility, and background impurity level, but leads to the formation of GaN surface with lower lateral scale of inhomogeneities. In addition, the reactor pressure influences the ratio of edge and impurity lines in the photoluminescence spectra and leakage current level in reversely biased Schottky barriers. [ABSTRACT FROM AUTHOR]

InGaN-based dichromatic light emitting diodes (LEDs) emitting in the blue and cyan spectral ranges simultaneously, are investigated both experimentally and theoretically. Two main approaches to controlling the ratio of blue-to-cyan components in the emission spectrum are suggested and analyzed: (i) thickness variation of the GaN barrier between the blue and cyan quantum wells and (ii) optimization of the barrier doping with n- or p-type impurities. Detailed examination of the approaches is carried out in order to understand their capabilities for intentional variation of the blue-to-cyan ratio in a wide range. Based on numerical simulations, a novel mechanism, invoking enhanced Shockley–Read–Hall recombination in the barrier and underlying both approaches, is suggested and discussed. It is shown that proposed design of the monolithic blue-cyan LEDs does not result in substantial decrease of the LED emission efficiency compared to monochromatic blue or cyan reference samples. [ABSTRACT FROM AUTHOR]

The effect of annealing temperature and time on the luminescence intensity of the InGaN/GaN heterostructure subjected to ion beam etching was studied. We show that annealing at a temperature of 1100°C makes it possible to eliminate the radiation defects in the GaN layers that arise in the etching process with a focused Ga+ ion beam (30 keV). [ABSTRACT FROM AUTHOR]

The broadening of the spectral linewidth of the GaN/InGaN/GaN quantum wells caused by the random distribution of indium and gallium atoms in the cation sublattice was analyzed theoretically. The calculated values of the full width at half maximum of the emission spectra at low temperature are much smaller than the usually observed experimental values, indicating that the emission linewidth of the InGaN quantum wells is mostly determined by other broadening mechanisms (e.g. indium clustering, quantum well width fluctuations, background impurity broadening, etc.). [ABSTRACT FROM AUTHOR]

The morphology and electrical properties of doped semi-insulating gallium nitride (GaN) epilayers have been studied. It was found that doping-induced improvement of the insulating properties of GaN epilayers with increased level of doping with carbon or iron is limited by the accompanying deterioration of surface morphology. The character of impurity-related morphology development is different for the two dopants. It is established that the co-doping with carbon and iron allows planarity of the GaN surface to be retained along with a significant improvement of insulating properties of epilayers. [ABSTRACT FROM AUTHOR]

A new approach for calculating the ion dose spatial distribution of the focused ion beam is proposed. The approach is based on the analysis of the secondary electron microscopy image of the area irradiated by the focused ion beam. [ABSTRACT FROM AUTHOR]

The work presents experimental data of Ga+ focused ion beam etching of disc and ring patterns in Si3N4/GaN structure. The reasons for the difference in etching depth between the discs and the rings are described. [ABSTRACT FROM AUTHOR]

Abstract: InAlN/AlN/GaN semiconductor heterostructures with a barrier thickness of 5-13 nm have been grown by metalorganic vapor phase epitaxy (MOVPE) on sapphire and SiC substrates. Optimization of GaN buffer and InAlN layers allows fabricating structures with sheet conductivity values below 210 Ohm/sq. High electron mobility transistors (HEMTs) fabricated from such structures show drain current value exceeding 1.25 A/mm with maximum transconductance of 450 mS/mm. Use of thin in situ Si3N4 capping allows to fabricate and compare HEMT and MIS-HEMTs. [ABSTRACT FROM AUTHOR]

The future generation of modern illumination should not only be cheap and highly efficient, but also demonstrate high quality of light, light which allows better color differentiation and fidelity. Here we are presenting a novel approach to create a white solid-state light source providing ultimate color rendition necessary for a number of applications. The proposed semi-hybrid device combines a monolithic blue-cyan light emitting diode (MBC LED) with a green-red phosphor mixture. It has shown a superior color rendering index (CRI), 98.6, at correlated color temperature of around 3400 K. The MBC LED epi-structure did not suffer from the efficiency reduction typical for monolithic multi-color emitters and was implemented in the two most popular chip designs: 'epi-up' and 'flip-chip'. Redistribution of the blue and cyan band amplitudes in the white-light emission spectrum, using the operating current, is found to be an effective tool for fine tuning the color characteristics. [ABSTRACT FROM AUTHOR]

A combined experimental and modeling study of stress and curvature evolution during (0001) GaN growth on (0001) 4H-SiC wafers is presented. It is shown that the GaN layers are under the compressive stress, whose magnitude depends on the composition of the AlGaN buffer that is used to accommodate the epitaxial strain between GaN and SiC. Processing of in situ curvature measurements suggests fast relaxation of the mismatch stress in GaN when the Al content is increased. At that, nucleation of new dislocations is possible, but the dislocation density decreases rapidly over a narrow part of the GaN layer due to large inclination and annihilation of the threading dislocations. Eventually, correlations between the curvature/stress/dislocation evolution and AlGaN buffer composition can be established and optimal strategy for the growth of crack-free structures can be suggested. [ABSTRACT FROM AUTHOR]

InGaN-based monolithic multi-color light emitting diodes (LEDs) are studied both experimentally and theoretically with the focus on factors controlling their emission spectra and efficiency. A number of LEDs with different designs of spacers separating active regions providing blue and green light emission is examined. Unexpected behavior of the multi-color LED efficiency is explained in terms of a simple balance model, assuming some degradation of materials quality of the green active region grown on top of the blue one. Electrical properties of spacers separating different active regions in the multi-color LED structures are identified as the major factor controlling the contributions of these active regions to the total emission spectrum. Correlations between the type and level of the spacer doping and the emission spectrum are found by simulations. Alternative ways of the spectral control by using polarization doping in the graded-composition InGaN and AlGaN alloys used as the spacers are suggested. Color characteristics of blue/green dual-wavelength LEDs are also measured and discussed, regarding their possible applications. [ABSTRACT FROM AUTHOR]

We present a method for determining the diffusion lengths of Ga adatoms on GaN by combining profiling of the tops of GaN stripes obtained by selective area MOCVD and a diffusion growth model. We deduce very high values of the diffusion lengths on tops of <11-20>-oriented stripes at 1040 °C which range from 6 μm under nitrogen-rich to 24 μm under hydrogen-rich atmosphere in the reactor. The obtained results show in particular that Ga-catalyzed growth of GaN nanostructures and nanowires should not be limited by Ga influx and thus the exceptional growth rate is anticipated in such cases. [ABSTRACT FROM AUTHOR]

In this paper we obtained GaN and InGaN nanowires on AlN/Si (111) templates via pulsed Metal Organic Chemical Vapour Deposition (MOCVD). The growth modes were investigated, in which selective growth is possible. The impact of NH3 flow and TMG flow and exposure time were investigated. Also the possibility of using indium catalyst was studied. It was shown that In can be used in Au-In melt and as self-suffisient catalyst. (© 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [ABSTRACT FROM AUTHOR]

In this study we investigate the possibility of a-GaN ELOG process and its peculiarities for stripes of various orientations. It is shown that stripe orientation allows governing such important parameters of ELOG-process as lateral growth rate, voids high, fast growth direction. The intermediate orientations of stripe windows (differ from conventional (0001) and (1-100)) can be effectively used for double-cross ELOG process. (© 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [ABSTRACT FROM AUTHOR]

We demonstrate optical Bragg lattices formed by quasi-two-dimensional excitons in periodic systems of the InGaN quantum wells separated by the GaN barriers. When the Bragg resonance and exciton-polariton resonance are tuned to each-other, the medium exhibits an exciton-mediated resonantly enhanced optical Bragg reflection. The enhancement factor appeared to be larger than 2 for the system of 60 quantum wells. Owing to a high binding energy and oscillator strength of the excitons in InGaN quantum wells, the resonant enhancement was achieved at room temperature. [ABSTRACT FROM AUTHOR]

Effect of pressure in the reactor in the case of growth of active regions in the InGaN/GaN light-emitting diodes by the method of vapor-phase epitaxy from metalorganic compounds on their electroluminescent and structural properties has been studied. It is shown that, as pressure is increased, the InGaN layers become transformed from being continuous in the lateral direction to the layers of separate InGaN islands. This transformation affects both the emission efficiency and the dependence of efficiency on current. [ABSTRACT FROM AUTHOR]

A new method of forming InGaN/GaN nanostructures emitting in the long-wavelength green spectral range is proposed and implemented. The method is based on growing a thin InGaN layer over nanosized pits formed in situ by etching a locally AlN-masked GaN layer in a hydrogen-containing atmosphere. [ABSTRACT FROM AUTHOR]

Magnesium is the only acceptor impurity practically used in MOCVD of GaN. High activation energy requires high impurity concentration, which results in epilayer morphology degradation. In the presented paper an influence of growth regimes, including choice of carrier gas, on GaN:Mg morphology is presented. It is demonstrated that surface morphology depends on an average magnesium concentration and strongly improves with using nitrogen as carrier gas. [ABSTRACT FROM AUTHOR]

Processes of active-region formation for green LEDs on the basis of multilayer strained InGaN/GaN nanoheterostructures have been studied. It is shown that the formation of structures of this kind is highly affected by elastic stress relaxation leading to a larger amount of indium incorporated into InGaN layers. For structures emitting in the blue spectral range, an increase in the number of quantum wells (QWs) from 1 to 10 does not lead to stress relaxation or to a shift of the emission wavelength, whereas for structures emitting in the green spectral range, raising the number of QWs from one to five causes a monotonic increase in the emission wavelength. [ABSTRACT FROM AUTHOR]

The N-Al0.27Ga0.73N/GaN High Electron Mobility Transistors (HEMTs) with different gate lengths L g (ranging from 170 nm to 0.5 μm) and gate widths W s (ranging from 100 to 1200 μm) have been studied. The S parameters have been measured; these parameters have been used to determine the current-gain cutoff frequency f t, the maximum oscillation frequency fmax, and the power gain MSG/MAG and Mason’s coefficients were investigated in the frequency range from 10 MHz to 67 GHz in relation to the gate length and gate width. It was found that the frequencies f t and fmax attain their maximum values of f t = 48 GHz and fmax = 100 GHz at L g = 170 nm and W g = 100 μm. The optimum values of W g and output power P out of the basic transistors have been determined for different frequencies of operation. It has also been demonstrated that the 170 nm Al0.27Ga0.73N/GaN HEMT technology provides both good frequency characteristics and high breakdown voltages and is very promising for high-frequency applications (up to 40 GHz). [ABSTRACT FROM AUTHOR]

In the present paper we report on the observation and study of intense spontaneous THz emission from modulation-doped AlGaN/GaN heterostructure under conditions of heating of two-dimensional electron gas in lateral electric field. The experimental results are compared with the model of blackbody-like thermal emission of hot 2D electrons. Complementary transport measurements and theoretical simulation were carried out to determine the dependence of effective electron temperature on electric field. The role of non-equilibrium optical phonon accumulation is discussed. [ABSTRACT FROM AUTHOR]

A correction to the article "Blackbody-Like Emission of Terahertz Radiation From AlGaN/GaN Heterostructure Under Electron Heating in Lateral Electric Field" is presented.

The authors report on the observation and study of terahertz radiation emission from modulation-doped AlGaN/GaN heterostructure under conditions of heating of a two-dimensional electron gas in the lateral electric field. The experimental results are compared with the theoretical model of blackbody-like emission from hot two-dimensional electrons. Complementary transport measurements and a theoretical simulation were carried out to determine the dependence of effective electron temperature on electric field. The role of nonequilibrium optical phonon accumulation is discussed. [ABSTRACT FROM AUTHOR]