Search

As the integration and the miniaturization of electronics devices, design space become narrower and interactions between design factors affect their reliability. This paper presents a methodology of quantifying the interaction of each design factor in electronics devices. Thermal fatigue reliability of BGA assembly was assessed with the consideration of the interaction between design factors. Sensitivity analysis shows the influence of each design factor to inelastic strain range of a solder joint characterizing the thermal fatigue life if no interaction occurs. However, there is the interaction in BGA assembly since inelastic strain range depends on not only a mismatch in CTE but also a warpage of components. Clustering can help engineers to clarify the relation between design factors. The variation in the influence was taken to quantify the interaction of each design factor. Based on the interaction, simple evaluating approach of inelastic strain range for the BGA assembly was also developed. BGA package was simplified into a homogeneous component and equivalent CTE wascalculated from the warpage of BGA and PCB. The estimated equation was derived by using the response surface method as a function of design factors. Based upon these analytical results, design engineers can rate each factor's effect on reliability and assess the reliability of their basic design plan at the concept design stage., Comment: Submitted on behalf of TIMA Editions (http://irevues.inist.fr/tima-editions)

The recent development of electric and electronic devices has been remarkable. The miniaturization of electronic devices and high integration are progressing by advances in mounting technology. As a result, the reliability of fatigue life has been prioritized as an important concern, since the thermal expansion difference between a package and printed circuit board causes thermal fatigue. It is demanded a long-life product which has short development time. However, it is difficult because of interaction between each design factor. The authors have investigated the influence of various design factors on the reliability of soldered joints in BGA model by using response surface method and cluster analysis. By using these techniques, the interaction of all design factors was clarified. Based upon the analytical results, design engineers can rate each factor's effect on reliability and assess the reliability of their basic design plan at the concept design stage., Comment: Submitted on behalf of TIMA Editions (http://irevues.inist.fr/tima-editions)

In recent years, interfacial fracture becomes one of the most important problems in the assessment of reliability of electronics packaging. Especially, underfill resin is used with solder joints in flip chip packaging for preventing the thermal fatigue fracture in solder joints. In general, the interfacial strength has been evaluated on the basis of interfacial fracture mechanics concept. However, as the size of devices decrease, it is difficult to evaluate the interfacial strength quantitatively. Most of researches in the interfacial fracture were conducted on the basis of the assumption of the perfectly bonding condition though the interface has the micro-scale structure and the bonding is often imperfect. In this study, the mechanical model of the interfacial structure of resin in electronic components was proposed. Bimaterial model with the imperfect bonding condition was examined by using a finite element analysis (FEA). Stress field in the vicinity of interface depends on the interfacial structure with the imperfect bonding. In the front of interfacial crack tip, the behavior of process zone is affected by interfacial structure. However, the instability of fracture for macroscopic crack which means the fracture toughness is governed by the stress intensity factor based on the fracture mechanics concept., Comment: Submitted on behalf of TIMA Editions (http://irevues.inist.fr/tima-editions)