Search

ABSTRACT Nowadays, there is increasing interest in natural antioxidants from food by-products. Astaxanthin is a potent antioxidant and one of the major carotenoids in crustaceans and salmonids. An ultra-high pressure liquid chromatographic method was developed and validated for the determination of astaxanthin in shrimp by-products, and its migration from new packaging materials to food simulants was also studied. The method uses an UPLC® BEH guard-column (2.1 × 5 mm, 1.7 µm particle size) and an UPLC® BEH analytical column (2.1 × 50 mm, 1.7 µm particle size). Chromatographic separation was achieved using a programmed gradient mobile phase consisting of (A) acetonitrile-methanol (containing 0.05 m ammonium acetate)-dichloromethane (75:20:5, v/v/v) and (B) ultrapure water. This method was evaluated with respect to validation parameters such as linearity, precision, limit of detection, limit of quantification and recovery. Low-density polyethylene films were prepared with different amounts of the lipid fraction of fermented shrimp waste by extrusion, and migration was evaluated into food simulants (isooctane and ethanol 95%, v/v). Migration was not detected under the tested conditions. Copyright © 2012 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

In this work the proximal analysis, physicochemical characterization, fatty acid profile and astaxanthin content of pigmented oil obtained by fermentation shrimp heads are presented. Lipids are the major components in the oil (95%). The saponification number is 178.62 mg KOH/g, iodine value 139.8 cg iodine/g, and the peroxide value was not detected. Density and viscosity were 0.92 mg/ml and 64 centipoises, respectively. The highest contents of fatty acids were linoleic (C18:2n6), oleic (C18:1n9) and palmitic (C16:0). Eicosapentaenoic acid (C20:5n3, EPA) and docosahexaenoic acid (C22:6n3, DHA) account for 9% of the total. The content of astaxanthin was 2.72 mg/g dry weight. The pigmented oil is a dietary source of nutrients with high value such as astaxanthin. [ABSTRACT FROM AUTHOR]

Whole white corn was ground, and lime, water and xanthan gum (XG, 0.5% w/w), carboxymethylcellulose (CMC, 0.5% w/w), guar gum (GG, 0.5% w/w) or a gums mix (XG, 0.25% w/w; CMC, 0.15% w/w; GG, 0.10% w/w) were added. Blends were extruded, dried and ground to obtain nixtamalized corn flour (ENCF), and they were used to make tortillas. The particle size distribution, particle size index, water absorption capacity (WAC) and water absorption index (WAI) were determined in flour; moisture content and viscoelastic characteristics (G′, G′′, tan δ) were determined in corn masa; tortillas were made, and texture (cutting force and rollability) and sensory evaluation were carried out. ENCF with XG and gums mix had the highest WAC, and tortillas were softer (33%) than tortillas from ENCF without gums. Corn masa viscoelasticity (tan δ) correlated negatively with tortilla firmness (r = − 0.84). Corn tortillas made with XG and gums mix had acceptable organoleptic characteristics. PRACTICAL APPLICATION The extrusion process allows the using of the whole corn to make tortillas and reduce processing costs and the contaminant effluents (cooking liquor). The addition of a mix of gums during extrusion makes the corn masa retain more water and modify its rheological properties, improving masa handling characteristics and tortilla textural quality. The evaluation of masa viscoelasticity with the dynamic method makes it possible to differentiate corn masas and to select the best treatments. [ABSTRACT FROM AUTHOR]

A simple and specific analytical method was developed and tested for the determination of sulforaphane in broccoli by-products. The method includes the optimization of the conversion of glucoraphanin to sulforaphane, followed by purification of extracts using solid-phase extraction and high-performance liquid chromatography (HPLC) analysis. The response surface methodology was used to find optimum conditions for the preparation and purification procedure. Chromatographic conditions for reversed-phase HPLC with UV photodiode array detection were as follows: column, Exil ODS C18, 25 × 0.46 cm, 5 μm; column temperature, 36°C; mobile phase, a 30 : 70 (v/v) mixture of acetonitrile:water; flow rate, 0.6 mL/min. The detection wavelength was UV 202 nm. Under these conditions, excellent linearity was obtained ( r2 = 1), and the overall recovery was 97.5 and 98.1% for fresh florets and lyophilized florets, respectively. The precision results showed that the relative standard deviation of the repeatability for florets fresh and lyophilized was 3.0 and 4.0%, respectively. Sulforaphane contents were determined in the edible portion of fresh broccoli, and broccoli crop remains. Copyright © 2009 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

A high-performance liquid chromatographic (HPLC) method is described for determination of the ratio of β- d-mannuronic acid to α- l-guluronic acid (M/G ratio) in dietary fibre of edible seaweeds. Total dietary fibre (TDF) content was determined gravimetrically. The TDF fraction was hydrolysed with 12 m and 1 m H2SO4, then neutralized with AG 4 × 4 resin. The uronic acids were separated in a Tracer Extrasil SAX 5 µm column (25 cm × 4 mm) at 35°C, with 2 m m KH2PO4 containing 5% methanol as mobile phase at a flow rate of 1.5 mL/min. The detection wavelength was UV 210 nm. The chromatographic identifications of β- d-mannuronic acid and α- l-guluronic acid were confirmed by liquid chromatography-mass spectrometry (LC-MS). The method precision was 1.4% for β- d-mannuronic acid and 3.5% for α- l-guluronic acid. The method was used to determine M/G ratio in canned seaweeds ( Saccorhiza polyschides and Himanthalia elongata) and in dried seaweeds ( H. elongata, Laminaria ochroleuca, Undaria pinnatifida, Palmaria sp. and Porphyra sp.). Copyright © 2003 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

Chitosan (CAS n. 9012-76-4) is a natural polysaccharide obtained by the partial deacetylation of chitin. It is a linear polymer of b (1-4) 2-acetamido-2-deoxy-D-glucose and 2-amino-2-deoxy-D-glucose in different proportions. Chitin is the most abundant polysaccharide after cellulose and the main source is the shells of crustaceans. It has been demonstrated that some important properties are directly related to the antimicrobial activity of chitosan. Some of these properties are the molecular weight (Mw), the degree of polymerisation (DP) and the degree of deacetylation (DD). In this work several analytical techniques (FTIR (Fourier-transform Infrared Spectroscopy), NMR (Nuclear Magnetic Resonance Spectroscopy) and SEM (Scanning Electron Microscopy)) were attempted to characterize two different samples obtained from shrimp waste. It can be concluded that sample 1 should be more suitable to be added as an active agent to a film. [ABSTRACT FROM AUTHOR]

Electrospinning can be used to prepare membranes with characteristics for biomedical application. In this work, the electrospinning conditions for the fabrication of membranes based on polymers extracted from natural sources such as chitosan and collagen were optimized (injection flow, injection volume, distance from the collector to the neddle, needle size and voltage). Specifically, four formulations were prepared with pure chitosan and mixtures of collagen (purified or hydrolyzed) and agarose. The optimal electrospinning conditions were an injection flow rate of 0.1 ml/h, a 16 G needle, an injection volume of 5 ml, a distance of 8 cm between the needle and the collector, and a voltage of 20 kV. Agarose addition resulted in greater elongation at break and maximum stress, and greater elasticity was observed in the mixture with hydrolyzed collagen. Fiber formation was observed in the structure prepared from chitosan and hydrolyzed collagen. The water holding capacity was greatest in the pure chitosan membranes and the addition of other polymers reduced this property by their interaction. The contributions of this research are as follows:•The electrospinning conditions were the same for the fabrication of membranes from pure chitosan and chitosan mixed with natural polymers.•The mechanical and biological properties of the membranes were improved by the addition of hydrolyzed collagen and agarose.•The addition of hydrolyzed collagen promoted the formation of fibers and porous membranes., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2025 The Authors. Published by Elsevier B.V.)

A new, simple, and reproducible isocratic high-performance liquid chromatography (HPLC) method has been developed for the determination of free and total tyrosine and tryptophan in a protein concentrate. To determine total amino acids, the method involves alkaline hydrolysis of the proteins with sodium hydroxide at 120 degrees C for 4h in the absence of air. Best results were achieved with a SS Exil ODS column 5microm (25cmx0.46cm i.d.), with an eluent of methanol: 40mM sodium acetate buffer (adjusted to pH 4.5 with acetic acid; 20:80, v/v), a flow rate of 0.80mL/min at 26 degrees C, and with programmable fluorescence detection. Under optimum conditions excellent linearity was obtained, and the overall recovery was 90.5, and 95.9% for total tryptophan and tyrosine, respectively. The precision results showed that the relative standard deviation of the repeatability and reproducibility were < or =4.78 and < or =4.65, respectively. This method was used to quantify the cited analytes in the protein concentrate obtained during the lactic acid fermentation of shrimp waste.

This work presents a high-performance liquid chromatography (HPLC) method for the quantitation of glucosamine in chitin. The method includes an acid hydrolysis of chitin. The chromatographic separation is achieved using a Hypersil ODS 5-microm column (250 x 4.6 mm) at 38 degrees C, with precolumn derivatization with 9-fluorenylmethyl-chloroformate and UV detection (lambda = 264 nm). The mobile phase is a mixture of mobile phase A [30 mM ammonium phosphate (pH 6.5) in 15:85 methanol-water (v/v)], mobile phase B [15:85 methanol-water (v/v)], and mobile phase C [90:10 acetonitrile-water (v/v)], with a flow rate of 1.2 mL/min. The HPLC method proposed showed adequate repeatability (relative standard deviation, 5.8%), accuracy (92.7% recovery), and sensitivity, with a detection limit of 2 microg/mL. The method is successfully applied to the quantitation of glucosamine for the determination of the purity of chitin from shrimp waste.

This study presents an HPLC method for the simultaneous quantification of retinol, alpha-tocopherol, and cholesterol in shrimp waste hydrolysate lipid fraction. The method includes microscale saponification and extraction with n-hexane. Liposoluble vitamins and cholesterol were quantified by HPLC with UV detection (HPLC-UV), on a 25 cm x 0.46 cm SS Exil ODS 5 microm column, mobile phase 68:28:4 (v/v/v) methanol:acetonitrile:water; flow rate 1.4 ml/min; column temperature 36 degrees C. The detection was operated using two channels of a diode-array spectrophotometer, 325 nm for retinol and 208 nm for alpha-tocopherol and cholesterol. With these conditions, the overall recovery was 95.7, 100.8, and 98.0% for retinol, alpha-tocopherol, and cholesterol, respectively. The method precision (relative standard deviation) was 1.83% for retinol, 2.32% for alpha-tocopherol, and 1.98% for cholesterol. This method was used to quantify the cited analytes in the hydrolysate obtained during lactic acid fermentation of shrimp waste. This hydrolysate may be a valuable supplement of nutrients in fish production.

This work presents an HPLC method for the quantification of free amino acids in lyophilized protein fraction from shrimp waste hydrolysate which is obtained by acid lactic fermentation and analyzed using pre-column derivatization with 9-fluorenylmethyl-chloroformate. The amino acids were separated in a Hypersil ODS 5 microm column (250 mm x 4.6 mm) at 38 degrees C. The mobile phase was a mixture of phase A: 30 mM ammonium phosphate (pH 6.5) in 15:85 (v/v) methanol/water; phase B: 15:85 (v/v) methanol/water; and phase C: 90:10 (v/v) acetonitrile/water, with flow rate 1.2 ml/min. Fluorescence detection was used at an excitation wavelength of 270 nm and an emission wavelength of 316 nm. Method precisions for the different amino acids were between 4.4 and 7.1% (relative standard deviation, RSD); detection limits were between 23 and 72 ng/ml; and the recoveries were between 89.0 and 95.0%. The amino acid present at the highest concentration was tyrosine.

A high-performance liquid chromatography method for the microscale determination of alpha- and gamma-tocopherol in leaves, flowers and fresh beans from Moringa oleifera is reported. The method includes microscale saponification and extraction with n-hexane. Optimized conditions for reversed-phase HPLC with UV detection were as follows: column, 25 cm x 0.46 cm, Exil ODS 5-microm; column temperature, 25 degrees C; mobile phase, a 20:80 (v/v) mixture of methanol:acetonitrile; flow rate, 1.0 ml/min. With these conditions, method precision (relative standard deviation) was 5.6% for alpha-tocopherol and 4.9% for gamma-tocopherol. We used this method to measure alpha- and gamma-tocopherol in samples from M. oleifera as part of nutritional studies in edible plants cultivated in the Northwest México.

This study presents a high-performance liquid chromatography (HPLC) method for simultaneous determination of thiamine and riboflavin and the results of its application to a number of edible seaweeds that are sampled in dried form (Himanthalia elongata, Laminaria ochroleuca, Undaria pinnatifida, Palmaria sp., and Porphyra sp.) or as canned food (H. elongata and Saccorhiza polyschides). Samples are prepared by acid and enzymatic hydrolysis. Optimized conditions for reversed-phase HPLC with fluorescence detection are as follow: column, Kromasil 100 C18; column temperature, 35 degrees C; mobile phase, a 72:28 (v/v) mixture of 0.005 M ammonium acetate (pH 6.7)-methanol; and flow rate, 1.35 mL/min. With these conditions, recovery is 95.52% for thiamine and 90.08% for riboflavin, and the method precision (relative standard deviation) is 2.66% for thiamine and 2.21% for riboflavin. On a dry weight basis, thiamine contents range from 0.14 microg/g in dried H. elongata to 2.02 microg/g in dried Porphyra and riboflavin contents from 0.31 microg/g in canned H. elongata to 6.15 microg/g in dried Porphyra.

A high-performance liquid chromatographic (HPLC) method for the microscale determination of alpha-tocopherol in macroalgae is reported. The method includes microscale saponification and extraction with n-hexane. The presence of alpha-tocopherol in macroalgae samples was confirmed by HPLC-MS. Alpha-tocopherol levels as determined in samples by HPLC with UV and fluorescence detection did not differ significantly; however, fluorescence detection has a higher sensitivity (detection limit 10.4 ng/ml, vs. 104 ng/ml with UV detection), as well as good precision (relative standard deviation 1.81%) and recovery (94.3%). Fluorescence detection is also faster. We used this method to determine the alpha-tocopherol contents of four commercial macroalgae products from northwest Spain as part of nutritional studies in dehydrated Himanthalia elongata and Laminaria ochroleuca, and also in canned Himanthalia elongata and Saccorhiza polychides.