Search

Increased soil pollution with heavy metals due to various human and natural activities has led to a growing need to address environmental contamination. Some remediation technologies have been developed to treat contaminated soil, but a biology-based technology, phytoremediation, is emerging. Phytoremediation includes phytovolatilization, phytostabilization, and phytoextraction using hyperaccumulator species or a chelate-enhancement strategy. To enhance phytoremediation as a viable strategy, microbiota from the rhizosphere can play an important role, but the use of genetic engineering can also increase the success of the technique. Here we review the key information on phytoremediation, addressing both potential and limitations, resulting from the research established on this topic. [ABSTRACT FROM AUTHOR]

Iodine is an essential micronutrient for humans due to its fundamental role in the biosynthesis of thyroid hormones. As a key parameter to assess health conditions, iodine intake needs to be monitored to ascertain and prevent iodine deficiency. Iodine is available from various food sources (such as seaweed, fish, and seafood, among others) and dietary supplements (multivitamins or mineral supplements). In this work, a microfluidic paper-based analytical device (μPAD) to quantify iodide in seaweed and dietary supplements is described. The developed μPAD is a small microfluidic device that emerges as quite relevant in terms of its analytical capacity. The quantification of iodide is based on the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) by hydrogen peroxide in the presence of iodine, which acts as the catalyst to produce the blue form of TMB. Additionally, powder silica was used to intensify and uniformize the colour of the obtained product. Following optimization, the developed μPAD enabled iodide quantification within the range of 10–100 µM, with a detection limit of 3 µM, and was successfully applied to seaweeds and dietary supplements. The device represents a valuable tool for point-of-care analysis, can be used by untrained personnel at home, and is easily disposable, low-cost, and user-friendly. [ABSTRACT FROM AUTHOR]

Membrane-based separation techniques have been used as an efficient process for analyte separation or enrichment and matrix removal. By coupling these techniques to flow-based analysis, sample preparation and analyte detection can be automated and miniaturized. Different membrane separation techniques are available but the most used in flow analysis are gas diffusion, dialysis, supported liquid membranes and polymer inclusion membranes. The current state of the art of membrane-based separations hyphenated with flow techniques is presented along with a discussion of the applications to environmental and food analysis. Moreover, a brief description of gas diffusion, dialysis and membrane extraction techniques is also included. [ABSTRACT FROM AUTHOR]

A method for the screening of biogenic amines in waters, whose presence at some concentration levels potentially cause adverse effects on humans, was developed for the first time. A suitable and easy to operate system, with low reagent consumption was devised. The proposed flow-based system was divided into two analytical parts, preconcentration and derivatization of the biogenic amines. Solid phase extraction, using a Chelex 100 resin, was the newly chosen strategy for preconcentration of the analyte and also removal of possible matrix interferences. Fluorescamine was used as derivatization reagent for biogenic amines followed by fluorimetric detection. The influence of different sorbent materials for preconcentration and flow system parameters such as pH of standards and buffer, composition of the eluent solution, flow-rates, standard/sample volume, were studied. The interference of ammonia was assessed, and no interference was observed. The limits of detection and quantification were 1.7 and 5.6 µmol L−1, respectively. The developed system was applied to water samples and the recovery results were 98 ± 7%. [ABSTRACT FROM AUTHOR]

A microfluidic paper-based device (µPAD) has been combined with metal–organic frameworks (MOFs) for total phenolic compounds (TPC) quantification in fruit samples for the first time. The performance of the µPAD, based upon the vertical flow approach, was enhanced in order to determine the TPC content with high accuracy in fruit samples. The method was based on the traditional Folin-Ciocalteu Index using gallic acid or oenotannin as reference phenolic compounds. This novel design and construction of the device are in agreement with the principles of Green Chemistry avoiding wax technology (lower toxicity). The analytical parameters that affect the colorimetric method (using digital imaging of the colored zone) performance were optimized including design, sample volume, and MOF amount. Then, the analytical features of the developed method were investigated such as dynamic range (1.6–30 mg L−1), limit of detection (0.5 mg L−1), and precision (RSD < 9%). Besides, the in-field analysis is achievable with a color stability up to 6 h after the loading process of the sample and storage stability for at least 15 days without performance losses (under vacuum at − 20 °C). Furthermore, the MOF ZIF-8@paper was characterized to study its composition and the successful combination. The feasibility of the proposed method was demonstrated by determining the TPC in 5 fruit samples using oenotannin as reference solute. The accuracy was validated by comparison of the data with the results obtained with the recommended protocol proposed by the International Organisation of Vine and Wine (OIV). [ABSTRACT FROM AUTHOR]

A flow-based method for the spectrophotometric determination of chromium (VI) in recreational waters with different salinities was developed. Chromium can occur in the environment in different oxidation states with different related physiological properties. With regard to chromium, the speciation is particularly important, as the hexavalent chromium is considered to be carcinogenic. To achieve that purpose, the use of the diphenylcarbazide (DPC) selective colored reaction with the hexavalent chromium was the chosen strategy. The main objective was to develop a direct and simple spectrophotometric method that could cope with the analysis of different types of environmental waters, within different salinity ranges (fresh to marine waters). The potential interference of metal ions, that can usually be present in environmental waters, was assessed and no significant interferences were observed (<10%). For a complete Cr(VI) determination (three replicas) cycle, the corresponding reagents consumption was 75 µg of DPC, 9 mg of ethanol and 54 mg of sulfuric acid. Each cycle takes about 5 min, including the system clean-up. The limit of detection was 6.9 and 12.2 µg L−1 for waters with low and high salt content, respectively. The method was applied for the quantification of chromium (VI) in both fresh and marine water, and the results were in agreement with the reference procedure. [ABSTRACT FROM AUTHOR]

In this work, the design of a microfluidic paper-based analytical device (μPAD) for the quantification of nitrate in urine samples was described. Nitrate monitoring is highly relevant due to its association to some diseases and health conditions. The nitrate determination was achieved by combining the selectivity of the nitrate reductase enzymatic reaction with the colorimetric detection of nitrite by the well-known Griess reagent. For the optimization of the nitrate determination μPAD, several variables associated with the design and construction of the device were studied. Furthermore, the interference of the urine matrix was evaluated, and stability studies were performed, under different conditions. The developed μPAD enabled us to obtain a limit of detection of 0.04 mM, a limit of quantification of 0.14 mM and a dynamic concentration range of 0.14–1.0 mM. The designed μPAD proved to be stable for 24 h when stored at room temperature in air or vacuum atmosphere, and 60 days when stored in vacuum at −20 °C. The accuracy of the nitrate μPAD measurements was confirmed by analyzing four certified samples (prepared in synthetic urine) and performing recovery studies using urine samples. [ABSTRACT FROM AUTHOR]

Iron is an important micronutrient involved in several mechanisms in the human body and can be an important biomarker. In this work, a simple and disposable microfluidic paper-based analytical device (µPAD) was developed for the quantification of iron in urine samples. The detection was based on the colorimetric reaction between iron(II) and bathophenanthroline and the reduction of iron(III) to iron(II) with hydroxylamine. The developed µPAD enabled iron determination in the range 0.07–1.2 mg/L, with a limit of detection of 20 µg/L and a limit of quantification of 65 µg/L, thus suitable for the expected values in human urine. Additionally, targeting urine samples, the potential interference of the samples color was overcome by incorporating a sample blank assessment for absorbance subtraction. Stability studies revealed that the device was stable for 15 days prior to usage and that the formed colored product was stable for scanning up to 3 h. The accuracy of the developed device was established by analyzing urine samples (#26) with the developed µPAD and with the atomic absorption spectrometry method; the relative deviation between the two sets of results was below 9.5%. [ABSTRACT FROM AUTHOR]

A sequential injection system for the determination of nitrate (NO3-) in vegetables was developed to automate this determination, allowing for substantially reduced reagent consumption and generated waste using low-cost equipment. After extraction with water and filtration, the extracted nitrate is reduced inline to nitrite in a copperized cadmium (Cd) column and determined as nitrite. According to the Griess–Ilosvay reaction, nitrate is diazotized with sulfanilamide and coupled with N-(1-naphtyl)-ethylenediamine dihydrochloride to form a purple-red azo dye monitored at 538 nm. Nitrate can be determined within a range of 1.35–50.0 mg L-1 of NO3- (corresponding to 0.270–10.0 g of NO3- per kg of vegetable), with a conversion rate of nitrate to nitrite of 99.1±0.8%. The results obtained for 15 vegetable extracts compare well with those provided by the classical procedure, with a sampling throughput of 24 determinations per hour and relative standard deviations better than 1.2%. [ABSTRACT FROM AUTHOR]

Examines a double-line sequential injection system developed for the spectrophotometric determination of several metal ions in waters. Configuration; Application of the methodology to the spectrophotometric determination of copper, iron, manganese and zinc; Chromogenic reagents and detection wavelengths; Analytical characteristics of the methodology; Results of the analysis that were in agreement with those obtained by atomic absorption spectrometry.

This work presents a portable microfluidic paper-based analytical device (micro-PAD) card for the quantification of total ammonia nitrogen in human saliva. The amount of total ammonia nitrogen in saliva can be an indicator of the status of the oral microbiome with potential correlation to kidney health problems. The developed micro-PAD card comprises twenty units consisting of three stacked layers of circular discs: the sample layer, paper discs impregnated with sodium hydroxide solution, the PTFE membrane layer, and the detection layer, paper discs impregnated with bromothymol blue. The twenty units were aligned on transparent laminating pouches laminated to form the micro-PAD card (7.5 cm × 10.5 cm). Saliva samples can be directly dispensed onto the micro-PAD card and the detection was achieved by the BTB indicator color change, from yellow to blue, after conversion of ammonium into ammonia and diffusion of the ammonia gas through a hydrophobic layer. The determination of total ammonia nitrogen in saliva using the developed micro-PAD card intended to be very simple method and operated without the need of laboratory equipment. A quantification limit of 11.3 NH4+mg L-1 and linear application range from up to 150 NH4+mg L-1 were obtained making it suitable for the expected concentrations of total ammonia nitrogen in human saliva. It was successfully applied to saliva samples and its validation obtained by comparison against a potentiometric method. The card is stable for at least 1 month making it ideal as a portable device for point-of-care diagnosis. [ABSTRACT FROM AUTHOR]

Contamination of ground water as a consequence of soil leaching processes is an issue of major concern. In this context, a simulation of the soil leaching process was designed. A sequential injection (SI) method to monitor the soil leaching of iron complexes with in-line rain simulation for leachate production is described. The developed methodology comprises the SI determination of both iron(III) and 3-hydroxy-4-pyridinones iron(III) complexes, coupled to a mini soil column (mSC) for displaying in-line rain simulations. The described SI method enabled iron(III) determination within the range 2.0–35 µmol L−1, with a detection limit of 0.42 µmol L−1, and determination of iron(III) complexes in the range 1.0–45 µmol L−1. It was successfully applied to leachates from laboratory scale soil columns (LSSC), with good precision for both iron(III) and iron complexes determinations: calculated relative standard deviation (RSD) of 5% and 6%, respectively. A step further in automation and miniaturization was attained with the incorporation of a mini soil column for the in-line leachate production. The system enabled the soil leachate production and assessment in less than 5 min, including determinations in triplicate. [ABSTRACT FROM AUTHOR]

In this work, a flow-based spectrofluorimetric method for iodine determination was developed. The system consisted of a miniaturized chip-based flow manifold for solutions handling and with integrated spectrofluorimetric detection. A multi-syringe module was used as a liquid driver. Iodide was quantified from its catalytic effect on the redox reaction between Ce(IV) and As(III), based on the Sandell–Kolthoff reaction. The method was applied for the determination of iodine in salt, pharmaceuticals, supplement pills, and seaweed samples without off-line pre-treatment. An in-line oxidation process, aided by UV radiation, was implemented to analyse some samples (supplement pills and seaweed samples) to eliminate interferences and release iodine from organo-iodine compounds. This feature, combined with the fluorometric reaction, makes this method simpler, faster, and more sensitive than the classic approach of the Sandell–Kolthoff reaction. The method allowed iodine to be determined within a range of 0.20–4.0 µmol L−1, with or without the in-line UV digestion, with a limit of detection of 0.028 µmol L−1 and 0.025 µmol L−1, respectively. [ABSTRACT FROM AUTHOR]

A flow injection analysis (FIA) system was developed for the determination of phosphate efflux from wine lactic acid bacteria ( Oenococus oeni and Lactobacillus hilgardii) as an indication of cell membrane damage. The system allowed the direct injection of the cell suspension, avoiding the filtration step, with minimum sample treatment and minimized reagent consumption. The developed system is characterized by a linear concentration zone between 3.23 × 10−5 and 4.84 × 10−4 mol L−1 PO4 3− and repeatability better than 2.9%. Bacterial suspensions were exposed to a chemical stress with phenolic acids and injected in the FIA system at regular intervals. The extracellular concentration of phosphate was measured spectrophotometrically. The experimental results obtained indicate that hydroxycinnamic acids ( p-coumaric, ferulic and caffeic) induced faster phosphate leakage rates than hydroxybenzoic acids (vanillic and p-hydroxybenzoic) in both strains tested, which could be related to their higher lipophilic character. [ABSTRACT FROM AUTHOR]

Considering the importance of monitoring the levels of nutrients present in soils and their availability to plants, an automatic methodology is proposed based on multi-syringe flow injection analysis (MSFIA) for the spectrophotometric determination of available phosphorus in soil extracts. This fully computerized flow technique allowed the development of a flow network where sample and reagents were intercalated and sent further towards the detection system. The colorimetric determination was based on the molybdenum blue method with ascorbic acid as reducing reagent and the Egner-Riehm method was applied to extract phosphorus from soil samples. A linear calibration curve was obtained between 0.75 and 15.0 mg L -1 . A determination frequency of 15 h -1 was achieved, with good repeatability for 12 consecutive injections of soil extracts (RSD<1.7%). The results obtained from 12 soil samples were statistically comparable to those attained by the usual batch method. [ABSTRACT FROM AUTHOR]

A bi-parametric sequential injection method for the determination of copper(II) and zinc(II) when present together in aqueous samples was developed. This was achieved by using a non-specific colorimetric reagent (4-(2-pyridylazo)resorcinol, PAR) together with two ion-exchange polymeric materials to discriminate between the two metal ions. A polymer inclusion membrane (PIM) and a chelating resin (Chelex 100) were the chosen materials to retain zinc(II) and copper(II), respectively. The influence of the flow system parameters, such as composition of the reagent solutions, flow rates and standard/sample volume, on the method sensitivity were studied. The interference of several common metal ions was assessed, and no significant interferences were observed (<10% signal deviation). The limits of detection were 3.1 and 5.6 µg L−1 for copper(II) and zinc(II), respectively; the dynamic working range was from 10 to 40 µg L−1 for both analytes. The newly developed sequential injection analysis (SIA) system was applied to natural waters and soil leachates, and the results were in agreement with those obtained with the reference procedure. [ABSTRACT FROM AUTHOR]