Search

Statement of Problem: The use of tilted implants has been considered a suitable option for completely edentulous patients. However, consensus on their clinical performance is lacking, specifically for partial rehabilitation., Purpose: The purpose of this systematic review and meta-analysis was to evaluate the marginal bone loss and implant survival rate of tilted implants compared with those of axial implants for implant-supported fixed partial dentures (ISFPDs)., Material and Methods: A systematic search of the MEDLINE/PubMed, Web of Science, Embase, Cochrane, and ProQuest databases and reference lists for articles published until May 2022 was performed by 2 independent reviewers without language or publication date restrictions. A meta-analysis was performed using the RevMan version 5.4 program. Quality assessments were performed using the Newcastle-Ottawa scale., Results: Nine studies were included, totaling 258 participants and 604 implants (269 tilted implants and 335 axial implants). No significant differences were found between the tilted and axial implants for the implant survival rate (P=.81; risk ratio: 1.14). However, higher marginal bone loss values were observed for tilted implants (P=.001; mean difference: 0.12 mm). No significant heterogeneity was observed in either analysis., Conclusions: No significant relationship was found between tilted and axial implants for ISFPD rehabilitation. However, tilted implants presented greater risks of marginal bone loss than axial implants., (Copyright © 2022 Editorial Council for The Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

The use of marine microorganisms in the treatment of dyes and textile effluents is promising in view of their tolerance to salinity, a characteristic found in this kind of effluent. In this study, different culture conditions were applied to evaluate the decolorization, degradation, and detoxification of Sulphur Indigo Blue (SIB) by the marine-derived basidiomycete Paramarasmius palmivorus CBMAI 1062. Low salt concentration (SLS) and high salt concentration (SMASHS) media were used. P. palmivorus decolorized 100 % and 91.38 % of SIB after 120 h of growth in the SLS medium and after 168 h of growth in the SMASHS medium, respectively. Laccase activity was detected only in the SLS bioassay. UV-Vis, FT-IR, and GC-MS analyses indicated the occurrence of dye biosorption and biotransformation. In the SLS medium metabolites associated with SIB biotransformation (e.g. aldehyde, alkanes, and phenols) were detected. The toxicity measured by Cucumis sativus decreased from 45.41 % to 24.11 % in the SLS bioassay, while in SMASHS medium there was no change in toxicity. The efficiency for decolorization and detoxification of SIB indicates that microorganisms from the marine environment can be a source for biotechnological application in bioremediation processes carried out under saline conditions, adding value to blue biotechnology.

Statement of Problem: The demand to streamline workflow while increasing patient comfort and satisfaction in the manufacturing of removable complete dentures (CDs) is growing, and computer-aided design and computer-aided manufacturing (CAD-CAM) technology has gained prominence. However, a systematic review and meta-analysis of the clinical performance and patient-related outcome measures (PROMs) of digitally fabricated complete dentures is lacking., Purpose: The purpose of this systematic review and meta-analysis was to determine whether digitally fabricated CDs improve the clinical performance and PROMs compared with conventionally fabricated CDs., Material and Methods: This systematic review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses and was registered at the International Prospective Register of Systematic Reviews (CRD42023433909). This review aimed to address the question "Do digitally fabricated CDs improve clinical performance and PROMs compared with conventional CDs?" Two independent authors conducted electronic searches up to September 2023. Denture base retention and patient satisfaction were analyzed through the continuous outcome evaluated by mean difference and standard deviation, with 95% confidence intervals. The risk of bias in each study was assessed using the Risk of Bias In Non-randomized Studies of Interventions and the Risk of Bias based on the Cochrane risk of bias tool for randomized trials. The certainty of evidence was assessed using Grading of Recommendations, Assessment, Development and Evaluation., Results: A total of 1505 articles were found during the search, and 16 were included in this review. The main outcomes were grouped into clinical performance (retention, adaptation or fit, clinician's denture quality assessment, masticatory efficiency, and occlusal force) and PROMs (patient satisfaction, oral health related quality of life, final choice, and willingness-to-pay). In terms of denture base retention, between conventional CDs and printed CDs analyses, conventional CDs exhibited better retention (P=.02), but no significant difference was found between the conventional CDs and milled CDs (P=.20). In terms of patient satisfaction, no statistically significant difference was found between the manufacturing methods of digitally fabricated CDs (printed CD, P=.55; milled CD, P=.08)., Conclusions: Digitally fabricated CDs showed similar or better clinical performance than conventional CDs, and different types of digital manufacturing processes for complete dentures did not influence PROMs., (Copyright © 2024 Editorial Council for The Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

This systematic review aims to determine whether the presence of human papillomavirus (HPV) influences the immunohistochemical expression of programmed cell death-1 ligand (PD-L1) in oropharyngeal squamous cell carcinoma (OPSCC). PD-L1 immunohistochemical expression varies in OPSCC, and the presence of HPV is a plausible explanation for this variability. Comprehending these findings is crucial, as high PD-L1 expression in the tumor microenvironment of OPSCC can help identify patient subgroups that could be suitable for immunotherapy. Therefore, a systematic review was conducted following PRISMA guidelines (CRD42023437800). An electronic literature search was performed without time or language restrictions. The search included PubMed/MEDLINE, Embase, Scopus, Web of Science, https://clinictrials.gov, and relevant journals. A meta-analysis was performed using RStudio. Fourteen studies involving 1,629 participants were included. The sample consisted predominantly of males (81.26%) with a mean age of 58.3 years. Concerning clinical and pathological characteristics, the most frequently described anatomical location was the tonsils (68.54%), and most participants were either current or former smokers (78%) and alcohol users (79%). Advanced TNM IV was the most common stage. Regarding histopathological characteristics, HPV 16 was the only type mentioned, and half of the cases were detected through immunohistochemistry. The SP142 clone (35.7%) and the pattern of membrane immunostaining in tumor cells (71%) were the most commonly employed methods. The most prevalent findings were positive expression of PD-L1 (64.28%) and negative HPV status (57.14%). The association between PD-L1 positivity and HPV positivity (78.57%) was confirmed by meta-analysis. The conclusion was that HPV-positive status has an impact on immunohistochemical expression of PD-L1 in OPSCC.

Purpose: To evaluate, through in vitro studies, the bond strength of vitreous and hybrid ceramics with self-etching surface treatment compared to conventional treatment., Methods: This systematic review followed the preferred reporting items for systematic reviews and meta-analyses (PRISMA) and was registered on the open science framework (OSF) platform for in vitro studies. A population, intervention, control, and outcome (PICO) question was formulated: "Does the surface conditioning of glass and hybrid ceramics with self-etching silane present a bond strength similar to that of conventional bonding?". A literature search was carried out in the PubMed, Embase, Web of Science, Cochrane Library, and ProQuest databases until September 2023. The Joanna Briggs Institute (JBI) critical appraisal guidelines for quasi-experimental studies were used for risk assessment of bias. The meta-analysis was based on the inverse variance (IV) method (p < 0.05)., Results: A total of 29 in vitro studies published between 2017 and 2022 were included in this systematic review, totaling 1889 ceramic samples. The meta-analysis indicated a significant decrease in the bond strength of HF 4%-5% with silane compared to self-etching (p < 0.05; MD: 0.34; 95% CI: 0.13-0.35; I 2 = 3%, p = 0.42), while it indicated that there was no significant difference between self-etching compared to 9%-10% HF with silane (p = 0.92; MD: 0.02; 95% CI: -0.32 to 0.36; I 2 = 14%, p = 0.32)., Conclusion: Self-etching primer presents bond strength that is superior to or similar to conventional surface treatment on glass and hybrid ceramics., (© 2024 by the American College of Prosthodontists.)

Cold-adapted microorganisms can produce enzymes with activity at low and mild temperatures, which can be applied to environmental biotechnology. This study aimed to characterize 20 Antarctic fungi to identify their genus (ITS rDNA marker) and growth temperatures and evaluate their ability to decolorize and detoxify the textile dye indigo carmine (IC). An individual screening was performed to assess the decolorization and detoxification of IC by the isolates, as well as in consortia with other fungi. The isolates were affiliated with seven ascomycete genera: Aspergillus (n = 4), Cosmospora (n = 2), Leuconeurospora (n = 2), Penicillium (n = 3), Pseudogymnoascus (n = 6), Thelebolus (n = 2), and Trichoderma (n = 1). The two isolates from the genus Leuconeurospora were characterized as psychrophilic, while the others were psychrotolerant. The Penicillium isolates were able to decolorize between 60 and 82% of IC. The isolates identified as Pseudogymnoascus showed the best detoxification capacity, with results varying from 49 to 74%. The consortium using only Antarctic ascomycetes (C1) showed 45% of decolorization, while the consortia with the addition of basidiomycetes (C1 + Peniophora and C1 + Pholiota) showed 40% and 50%, respectively. The consortia C1 with the addition of the basidiomycetes presented a lower toxicity after the treatments. In addition, a higher fungal biomass was produced in the presence of dye when compared with the experiment without the dye, which can be indicative of dye metabolization. The results highlight the potential of marine-derived Antarctic fungi in the process of textile dye degradation. The findings encourage further studies to elucidate the degradation and detoxification pathways of the dye IC by these fungal isolates., (© 2024. The Author(s) under exclusive licence to Sociedade Brasileira de Microbiologia.)

Objectives: This study aimed to assess the influence of translucent monolithic versus bilayered crowns and whether the use of a CoCr base abutments affects the fatigue and fracture resistance of screwed implant-supported single crowns with external connections under mechanical cycling., Materials and Methods: Fifty specimens were divided into groups: (1) metal-ceramic (MC) crown, (2) veneered zirconia crown (Zr), (3) veneered zirconia crown with a CoCr base abutment (ZrB), (4) monolithic translucent zirconia crown (MZr), and (5) monolithic translucent zirconia crown with a CoCr base abutment (MZrB). Specimens underwent mechanical cycling (5 × 10 6 cycles; 150 N) evaluating fatigue resistance (number of failures) and those that failed were subsequently subjected to fractographic analyses (stereomicroscope and scanning electron microscope) to evaluate failure location and area, and maximum fracture load was also measured., Results: The failure-related survival rate (100%) and maximum fracture resistance of the MZrB were significantly higher than those of MC and Zr (50%; p < 0.05). There were no significant differences in the failure rate and fracture resistance when a CoCr base abutment was used or not in the translucent monolithic Zr groups (p > 0.05;MZrB vs. MZr). Failure location, with MC crowns' fractures, noted at the screw area (p = 0.043), while all-ceramic crowns were mostly in the cuspid and to failure area, the Zr group had the largest mean (15.55 ± 9.17 mm 2 ) among the groups, significant difference only when compared with MC (1.62 ± 0.81 mm 2 ) (p = 0.025)., Conclusions: Translucent monolithic zirconia crowns exhibited significantly higher fatigue and fracture resistance compared with conventional MC and bilayered crowns., Clinical Significance: The appropriate choice of material and manufacturing technique is crucial for predicting the higher clinical performance of single crowns. Enhanced mechanical resistance in terms of fatigue and fracture resistance can be achieved by replacing MC and bilayered restorations with computer-aided design and computer-aided manufacturing monolithic zirconia., (© 2024 Wiley Periodicals LLC.)

Statement of Problem: Three-dimensional printing is a rapid and cost-effective method that eliminates material waste during the manufacture of indirect restorations. Parameters such as print angle significantly affect the physical properties of the printed material. Several manufacturers suggest using an angle of 45 degrees to perform printing; however, different angles have been used, and the optimum parameters are unclear., Purpose: The purpose of this systematic review was to compare the 45-degree print angle with other protocols and evaluate the effect of print angle on the physical and mechanical material properties., Material and Methods: Two researchers independently searched for relevant studies published up to June 2023 in the PubMed/MEDLINE, Scopus, Web of Science, and Lilacs electronic databases. The population, intervention, comparison, outcome (PICO) question was: "Does the 45-degree print angle promote better physical characteristics for 3-dimensionally printed interim crowns?" Studies that compared the properties of the different print angles of interim crowns were analyzed., Results: Ten in vitro studies were selected for qualitative analysis. When evaluating marginal and internal fits, most studies selected the 45-degree angle, resulting in less discrepancy. The results of flexural strength analysis showed a high level of heterogeneity. The 0-degree print angle yielded better results in 3 studies, followed by the 90-degree print angle in 2 studies. The 45-degree angle yielded the highest fracture resistance value in 1 study and similar results to those of the control group (milled PMMA) in another study., Conclusions: The marginal and internal adaptation and resistance to flexure of printed interim crowns are satisfactory when a 45-degree print angle is used., (Copyright © 2024. Published by Elsevier Inc.)

Objectives: Evaluate the efficacy of denture cleaners on the adhesion of Candida albicans and their effects on the surface, optical, and mechanical properties of resins for conventional, milled, and 3D-printed denture bases., Materials and Methods: A total of 240 resin samples were made, 120 for testing Candida albicans adhesion, optical stabilities (ΔE 00 ), roughness (Ra), hydrophilicity (°), surface free energy (Owens-Wendt) and 120 samples for testing Candida albicans adhesion, surface microhardness (Knoop), flexural strength and modulus of elasticity in a three-point test, in which they were divided into 3 groups of denture resin (n = 40) and subdivided into 5 cleaners of dentures (n = 8). Data were evaluated by two-way ANOVA and Tukey's test for multiple comparisons (α = 0.05)., Results: Denture cleaners with an alkaline solution and dilute acid composition were those that showed the greatest effectiveness in reducing Candida albicans (P < 0.001), however 1% NaOCl significantly affected the properties of the resins (P < 0.05). Denture 3D-printed showed that the surface microhardness was significantly lower for all cleansers (P < 0.05)., Conclusions: Listerine demonstrated superior efficacy in reducing Candida albicans with minimal effect on denture properties, whereas 1% NaOCl had a significant negative impact on the properties. The mechanical properties were significantly lower in 3D-printed resin than in other resins for all denture cleansers., Clinical Relevance: Denture base materials are being sold to adapt to the CAD/CAM system, increasing the number of users of dentures manufactured with this system. Despite this, there is little investigation into denture cleaners regarding the adhesion capacity of microorganisms and the optical, surface and mechanical properties of dentures, thus requiring further investigation., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Statement of Problem: Prefabricated and custom glass fiber posts have been successfully used to reconstruct endodontically treated teeth. However, the performance of computer-aided design and computer-aided manufacture (CAD-CAM) milled glass fiber posts is unclear., Purpose: The purpose of this systematic review with meta-analysis was to compare the fracture and bond strength and cement layer thickness of CAD-CAM milled glass fiber posts with prefabricated or custom glass fiber posts., Material and Methods: The protocol was registered in the Open Science Framework (http://osf.io/65jm7). Two reviewers searched the PubMed/MEDLINE, Web of Science, Embase, Scopus, and ProQuest databases for articles up to September 2023. In addition, the reference lists were hand searched. A meta-analysis was performed by using the RevMan 5.4 program. The risk of bias was assessed using the RoBDEMAT tool., Results: After screening, a total of 18 studies were included. The CAD-CAM milled glass fiber posts showed higher fracture strength (P=.02; Standardized Mean Difference [SMD]: 0.57; 95% Confidence Interval [CI]: 0.07 to 1.07), bond strength (P=.010; SMD: 1.07; 95% CI: 0.26 to 1.89), and lower cement layer thickness (P=.009; SMD: -2.94; 95% CI: -5.15 to -0.73) when compared with prefabricated glass fiber posts. However, fracture strength (P=.53; SMD: 0.38; 95% CI: -0.79 to 1.54) and bond strength (P=.90; SMD: -0.05; 95% CI: -0.81 to 0.72) were statistically similar between CAD-CAM milled and custom glass fiber posts. Significant and substantial heterogeneity was observed in all meta-analyzes (P<.01; I>60%). The studies sufficiently reported most domains related to bias, except for randomization of samples, sample size rationale and reporting and operator blinding., Conclusions: CAD-CAM milled and custom glass fiber posts provide an effective and safe option for restoring endodontically treated teeth, especially for weakened teeth or enlarged root canals. However, further well-designed clinical research is recommended to strengthen these findings., (Copyright © 2024 Editorial Council for The Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Objective: Evaluate the roughness and color stability of different types of resins used to immerse denture bases in various denture cleansers overnight., Metodology: A total of 150 resin samples were made, which were divided into 3 groups of denture resin (conventional thermally activated, milled and 3D printed) (n= 50) and subdivided into 5 denture cleaners (Distilled water, Corega Tabs, Efferdent, NaOCl 1.0%, Listerine Cool Hint) (n= 10). The roughness properties (Ra) and chromatic difference (ΔE00) were evaluated during 90 days and 180 days of overnight cleaning. Data were evaluated by two-way ANOVA and Tukey's test for multiple comparisons (P<.05)., Results: Listerine had significantly higher Ra and ΔE values (P<.001) compared to other solutions, being significant in conventional resin at 180 days (P<.001)., Conclusions: The use of Listerine as an overnight cleaner presents greater damage to the optical and surface properties of denture base resins, mainly with conventional resin, with 1% NaOCl being a valid option in relation to cost-benefit.

Statement of Problem: Immediately loaded mandibular overdentures are clinically acceptable treatment options that have gained popularity because their use shortens the treatment duration. However, whether the immediate loading of dental implants can match the prosthetic events, satisfaction, and quality of life of delayed loading is still unclear., Purpose: The purpose of this systematic review and meta-analysis was to compare the prosthetic events, satisfaction, and quality of life of immediate versus delayed loading implants in patients rehabilitated with mandibular overdentures., Material and Methods: This review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement and was registered at The International Prospective Register of Systematic Reviews (PROSPERO) (CRD42021258187). Electronic searches were carried out by 2 independent reviewers in the PubMed/MEDLINE, Cochrane Library, and Web of Science databases up to May 2021. Only randomized clinical trials and prospective studies with at least 10 participants that compared immediate versus delayed loading were selected. A meta-analysis was performed by using the RevMan 5 software program for complications and maintenance outcomes., Results: Seven articles were included in the qualitative analysis, and 4 were included in the quantitative analysis. The meta-analysis demonstrated no significant difference between immediate and delayed loading for prosthetic complications (RR=1.71; 95% CI=0.67-4.37; I 2 =85%, P=.27) or maintenance (RR=1.92, 95% CI=0.44-8.28; I 2 =94%, P=.38)., Conclusions: Although the prosthetic complications and maintenance were more likely to favor the delayed loading group, available evidence showed no statistical difference for prosthetic complications and maintenance between immediate loading and delayed loading in mandibular overdentures., (Copyright © 2022 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Purpose: To evaluate whether complete dentures (CDs) relined with long-term resilient liners (LTRLs) favor better masticatory function, satisfaction, and quality of life among completely edentulous patients compared to conventional CDs., Materials and Methods: This review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) checklist and was registered in PROSPERO (the International Prospective Register of Systematic Reviews; CRD42021258700). The population, intervention, comparison, and outcome (PICO) purpose was to determine whether CDs relined with LTRLs favor better masticatory function, satisfaction, and quality of life among completely edentulous patients when compared to CDs. Searches were performed in the PubMed/MEDLINE, Embase, Scopus, Lilacs, BBO, and OpenGrey databases. Manual searches were also performed to identify additional primary studies., Results: Overall, 3,953 articles were found. After removing duplicates, reading the articles, and applying the inclusion and exclusion criteria, 15 articles were selected for qualitative analysis, totaling 422 patients with follow-up periods ranging from 1 week to 3 years. Among these, 8 studies assessed masticatory function using different methods, 2 assessed satisfaction, 1 assessed quality of life, and 4 assessed more than one outcome. Through qualitative analysis, LTRLs showed satisfactory results in most studies when compared to CDs in relation to masticatory function, satisfaction, and quality of life., Conclusions: LTRLs favor better masticatory function, satisfaction, and quality of life among completely edentulous patients compared to CDs.

Statement of Problem: The consequences of edentulism depend on its complexity and are far-reaching, but limited evidence regarding its association with neurologic health is available., Purpose: The purpose of this systematic review was to establish the relationship between oral prosthetic rehabilitation and the regional increase in brain activity., Material and Methods: This systematic review was registered in the International Prospective Register of Systematic Reviews (CRD42021262247), and the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) guideline was followed. Randomized clinical trials, prospective studies comparing the brain activity of patients rehabilitated with and without the use of dental prostheses, and studies that analyzed the human brain by using noninvasive techniques were used as inclusion criteria. The risk of bias in each study was assessed by using the Risk Of Bias In Non-randomized Studies-of Interventions (ROBINS-I)., Results: The search was carried out in the PubMed/MEDLINE, Embase, Cochrane Library, and https://clinicaltrials.gov databases up to June 2021. After a search conducted by 2 reviewers, 8 articles were included in the review. A regional increase in blood flow and regional cerebral activity during dental prosthesis use was identified in the studies., Conclusions: A positive association was found between the different types of prosthetic rehabilitation and brain function. Prostheses may preserve and restore neurological health., (Copyright © 2022 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Statement of Problem: Zirconia has become popular for dental implant abutments in the esthetic zone but can damage the implant connection interface. Studies have been conducted to compare zirconia abutments with conventional titanium abutments; however, a consensus or systematic review is lacking., Purpose: The purpose of this systematic review was to evaluate the performance of abutments made of zirconia and titanium in relation to wear and misfit at the implant-abutment interface., Material and Methods: Electronic databases (PubMed/MEDLINE, Embase, Web of Science) were independently searched by 2 researchers for relevant studies published up to June 2021. The population, intervention, comparison, outcome (PICO) question was "Do zirconia abutments cause greater wear at the implant-abutment interface than titanium abutments under occlusal forces?" Eligible studies included in vitro studies that evaluated changes in the surface of external and/or internal connections and single and/or multiple, screwed and/or cemented prostheses rehabilitated with titanium and zirconia abutments submitted to mechanical cycling., Results: Nine studies were included for qualitative analysis. A total of 172 specimens were analyzed, 86 zirconia and 86 titanium abutments. In terms of wear on the implant connection surface, zirconia abutments caused more severe wear, more scratches, and more rounding of the hexagonal angles at the implant connection interface than titanium abutments. In terms of misfit at the connection interface, zirconia abutments showed greater misfit than titanium abutments., Conclusions: Zirconia abutments produce more wear at the titanium implant connection interface, titanium abutments showed better fit to the implant connection interface, and the fit can be influenced by the abutment manufacturing method., (Copyright © 2022 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Objective: This study aimed to compare the efficacy of acellular xenogeneic dermal matrix graft (AXDM) compared to connective tissue graft (CTG) in treating multiple gingival recessions., Materials and Methods: A systematic search of electronic databases was conducted to identify randomized clinical trials (RCTs) that compared AXDM and CTG. The selected studies were subjected to bias risk assessment, data extraction, and meta-analyses. Parameters such as gingival recession height, width, mean percentage of root coverage, and complete root coverage were analyzed., Results: Seven RCTs involving 146 patients were included. The meta-analyses indicated that CTG was statistically superior to AXDM in reducing gingival recession height at the final follow-up (mean difference: -0.104 mm, 95% confidence interval [CI]: -0.180-0.028, p = 0.008) and width at the final follow-up (mean difference: -0.285 mm, 95% CI: -0.541-0.030, p = 0.029). CTG also demonstrated a significantly higher mean percentage of root coverage at the 6-month follow-up (difference in means: -2.761 mm, 95% CI: -4.932-0.590, p = 0.013) and a higher percentage of complete root coverage at the 6-month follow-up (odds Ratio [OR]: 0.598, 95% CI: 0.4-0.892, p = 0.012) compared to AXDM. However, there was no significant difference in the number of teeth with complete root coverage between CTG and AXDM (OR: 1.610, 95% CI: 0.983-2.636, p = 0.058) and aesthetic outcomes (mean difference: 0.148, 95% CI: -0.277-0.573, p = 0.494)., Conclusions: CTG is more effective than AXDM in treating multiple gingival recessions. This is evidenced by significant reductions in gingival recession height and width, a higher mean percentage of root coverage, and a greater percentage of complete root coverage at the 6-month follow-up., Clinical Relevance: In some clinical situations an alternative to CTG is required for the treatment of multiple gingival recessions. AXDM, despite presenting clinical outcomes that are not as satisfactory as CTG, can be used for this purpose., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Purpose: The purpose of this study was to investigate the mechanical properties of acrylic resins at different aging times for denture bases manufactured using the conventional method, microwave processing, milling, and 3D printing., Materials and Methods: A total of 160 rectangular samples (64 Å~ 10 Å~ 3.3 ± 0.03 mm) were prepared, divided among the four main resin groups, and subdivided into four analysis times (T0, T1, T2, and T3), resulting in 10 samples per subgroup. The samples were stored in distilled water at 37° ± 2°C for 24 hours (T0), then subjected to thermocycling at temperatures of 5° ± 1°C and 55° ± 1°C in different numbers of cycles: 5,000 (T1); 10,000 (T2); and 20,000 (T3). The mechanical properties evaluated were surface microhardness, flexural strength, and modulus of elasticity. Statistical differences between resin groups and aging time were evaluated using two-way analysis of variance (P < .05)., Results: The 3D-printed resin showed the significantly lowest values of microhardness, flexural strength, and modulus of elasticity compared to other resins (P < .001)., Conclusions: The CAD/CAM-milled denture resin showed mechanical properties similar to those of traditional resins (conventional and microwave-processed). The 3D-printing resin did not show adequate mechanical properties for long-term clinical use. Despite this, new studies are developing better properties of this resin for long-term use.

Facial fractures cause postoperative morbidity, including edema, pain, and trismus. Elastic therapeutic tapes are used for optimizing recovery. Background: The aim of the present systematic review and meta-analysis was to evaluate the effectiveness of elastic tape Kinesio taping (KT) in reducing postoperative morbidity in facial fractures surgeries. Methods: A systematic review was conducted in accordance with the PRISMA guidelines. Searches were conducted in the Cochrane, Medline, Scopus, Embase and Web of Science databases using a pre-established search strategy. Results: A total of 811 studies were retrieved after the duplicates were removed, and only randomized clinical trials were included. Eight trials, involving 319 participants, were deemed eligible. One study solely investigated the effect on edema, while the others analyzed at least two of the variables of interest. Results from two RCTs, where qualitative analysis was applicable, suggest a potential reduction in edema in the KT group compared to the control group on the second (RR -0.55, 95% CI -0.89 to -0.22; p = 0.01; I 2 = 0%) and third postoperative days (RR -0.71, 95% CI -1.01 to -0.40; p < 0.00001; I 2 = 0%). Conclusions: KT is effective in controlling postoperative edema following surgery for facial fractures. However, the effects on pain and trismus should be explored further in studies with standardized methods.

The objective of this systematic review was to evaluate the effectiveness of photobiomodulation therapy (PBM) in managing avulsed teeth. This systematic review was conducted using the Preferred Reporting Items for Systematic Reviews and Meta-analyses (i.e., "PRISMA") statement 2020 and was registered in the International Prospective Register of Systematic Reviews (i.e., PROSPERO) with number CRD42022362198. The participants, intervention, comparison, outcomes, and study design (i.e., PICOS) for the present study considered the following question: "Does the use of laser PBM in the treatment of teeth with avulsion influence tissue repair performance?" A literature search was performed in PubMed/MEDLINE, Embase, Web of Science, Cochrane Library, and ProQuest databases until January 2023. The SYRCLE's RoB tool (Systematic Review Center for Laboratory Animal Experimentation) for animal studies were used for quality assessment. A total of 7 in vivo studies published between 2011 and 2018 were included in this systematic review for qualitative analysis. All studies used Wistar rats, totaling 368 specimens that simulated tooth avulsion trauma. The effect of photodynamic therapy in the treatment of avulsed teeth was positive in 5 studies (significant increase in tissue repair) and negative in 2 studies, in which both studies with negative results kept teeth in saline solution before reimplantation and showed the longest time and power of laser application. PBM appears to be effective for tissue repair in the treatment of avulsed teeth, depending on the means of conservation of the avulsed tooth and the laser application protocol., (© 2024. The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature.)

Purpose: To carry out a systematic review to assess whether low-level laser therapy can improve the quality of life of patients with xerostomia undergoing head and neck radiotherapy., Methods: A systematic search was performed through Embase, Medline/PubMed, Cochrane, Scopus, Web of Science, nonpeer-reviewed clinicaltrials.gov and LILACS. The strategy included clinical studies were selected that prospectively followed or evaluated the quality of life by directly comparing the use of low-level laser therapy for xerostomia induced by head and neck radiotherapy with alternative therapies without the use of a laser. The risk of bias in the studies was assessed by RoB 2.0 and Robins I., Results: After all application of the predetermined criteria, four studies were included, dated between the years 2014 and 2023. Three studies described as randomized clinical trials were included, one of which was a randomized pilot study and only one was a prospective clinical trial. A total of 126 patients were evaluated, all four studies used the infrared wavelength, with two studies using the combination with the red wavelength. It was observed that low-level laser therapy can change the sensation of dry mouth, improving patients' quality of life. In addition, changes related to increased stimulated and unstimulated salivary flow were also identified., Conclusion: The use of low-level laser therapy has promising results on xerostomia, consequently improving the quality of life of patients undergoing radiotherapy in the head and neck region., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Harsh and extreme environments, such as Antarctica, offer unique opportunities to explore new microbial taxa and biomolecules. Given the limited knowledge on microbial diversity, this study aimed to compile, analyze and compare a subset of the biobank of Antarctic fungi maintained at the UNESP's Central of Microbial Resources (CRM-UNESP). A total of 711 isolates (240 yeasts and 471 filamentous fungi) from marine and terrestrial samples collected at King George Island (South Shetland Islands, Antarctica) were used with the primary objective of investigating their presence in both marine and terrestrial environments. Among the yeasts, 13 genera were found, predominantly belonging to the phylum Basidiomycota. Among the filamentous fungi, 34 genera were represented, predominantly from the phylum Ascomycota. The most abundant genera in the marine samples were Metschnikowia, Mrakia, and Pseudogymnoascus, while in the terrestrial samples, they were Pseudogymnoascus, Leucosporidium, and Mortierella. Most of the genera and species of the CRM-UNESP biobank of Antarctic fungi are being reported as an important target for biotechnological applications. This study showed the relevance of the CRM-UNESP biobank, highlighting the importance of applying standard methods for the preservation of the biological material and associated data (BMaD), as recommended in national and international standards.

Statement of Problem: Photodynamic therapy is widely used in dentistry, but limited evidence exists regarding its effectiveness in treating denture stomatitis. High resistance to antifungals has been reported, and photodynamic therapy could be an alternative treatment., Purpose: The purpose of this systematic review and meta-analysis was to evaluate whether photodynamic therapy is effective in reducing denture stomatitis., Material and Methods: A systematic review was conducted based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) checklist and recorded in the prospective register of systematic reviews (PROSPERO) (CRD42020205589) to answer the population, intervention, control, outcome (PICO) question: "Is photodynamic therapy effective in the treatment of denture stomatitis when compared with the use of antifungal agents?" Electronic searches were performed in databases PubMed/MEDLINE, Cochrane library, and Web of Science for articles published until February 2021 by using the following terms: (denture stomatitis OR oral candidiasis) AND (low-level light therapy OR laser therapy OR lasers OR photodynamic therapies OR photochemotherapy) AND (antifungal drugs OR antifungal agents OR antimicrobial OR treatment). Clinical trials and randomized clinical trials, studies in the English language, and studies comparing antifungal agents with photodynamic therapy were included., Results: In total, 5 articles were selected for the qualitative analysis and 3 for the meta-analysis. No significant difference was detected between antifungal therapy and photodynamic therapy in the reduction of colony-forming units on the palate. In a subgroup analysis, a significant difference was found in the reduction of colony-forming units on the palate at 15 days and at the denture surface at 30 days., Conclusions: Photodynamic therapy is effective in the treatment of denture stomatitis, but after 30 days and 15 days, the antifungals demonstrated better performance., (Copyright © 2021 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Background: The BRAF p.V600E genetic variant facilitates the pathogenesis of various tumors by triggering tumor proliferation and progression. The aim of this study was to analyze the prevalence of BRAF p.V600E in benign mixed epithelial and mesenchymal and malignant odontogenic tumors. In addition, we discussed the different detection methods used to assess for aberrant BRAF., Methods: This systematic review followed the PRISMA guidelines and was registered in Prospero (CRD42023445689). A comprehensive search of the PubMed/MEDLINE, Scopus, Web of Science, and Embase electronic databases was performed to answer the question "What is the prevalence of the BRAF p.V600E mutation in benign mixed and malignant odontogenic tumors?" The methodological quality of the selected studies was assessed using the JBI's Critical Appraisal Tool., Results: Initially, 387 records were identified, but only 11 articles met the inclusion criteria. A total of 70 patients with benign mixed epithelial and mesenchymal odontogenic tumors and 63 with malignant odontogenic tumors were included in the analysis. We found that the BRAF p.V600E mutation had a prevalence of 31.42% in mixed tumors and 26.98% in malignant odontogenic tumors. Moreover, immunohistochemistry showed high concordance with DNA-based molecular methods., Conclusion: In general, the BRAF p.V600E variant exhibited a prominent prevalence in mixed and malignant odontogenic tumors. However, most of the findings are based on small cohorts of patients and further studies with larger cohorts are needed., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Background: Adequate muscle activity is important for the success of oral rehabilitation: it maintains the integrity of the stomatognathic system and is responsible for chewing movements needed to break, crush and grind food., Objective: To compare muscle activity using electromyography (EMG) while clenching or chewing soft and/or hard foods among individuals with natural dentition (ND) and edentulous patients rehabilitated with dental prostheses., Methods: This review was conducted until March, 2023, and the research question was "Is the muscle activity of edentulous patients rehabilitated with dental prostheses similar to that of dentate individuals?" A search strategy was conducted in PubMed/MEDLINE, The Cochrane Library, Web of Science, Lilacs, Embase and manual journal searches., Results: Ten studies were included in the analysis. Most of them reported that individuals with ND had significant higher muscle activity (clenching or chewing) than complete dentures (CD) users. However, no difference was observed between patients with full mouth implant-supported fixed dental prosthesis (ISFDP) and ND. Additionally, two studies compared patients with mandibular ISFDP with maxillary CD and individuals with ND and found no differences; however, one study concluded that patients with ISFDP with CD (maxillary or mandibular) had lower muscle activity than individuals with ND. Only one study reported a higher muscle activity in patients with full-mouth ISFDP than in individuals with ND., Conclusions: Bimaxillary CD users had lower muscle activity than individuals with ND. During rehabilitation, the muscle activity of patients with full-mouth ISFDP and mandibular ISFDP with maxillary CD is similar to individuals with ND., (© 2023 John Wiley & Sons Ltd.)

Statement of Problem: Surface treatments for resin-ceramics have been developed to obtain a smooth surface and improve color stability. However, a consensus on the best treatment for these materials is lacking., Purpose: The purpose of this systematic review and meta-analysis was to evaluate the color stability and roughness of glass-ceramics versus resin-ceramics with different surface treatments., Material and Methods: The preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines were followed, and the study was registered in the open science framework (OSF) for in vitro studies. The population, intervention, control, and outcome (PICO) question was "Is there a difference in color stability and roughness between resin-ceramic vs vitreous ceramics in different surface treatment protocols?" A literature search was performed in PubMed/MEDLINE, Embase, Web of Science, Scopus, Cochrane Library, and ProQuest databases up to January 2023. The Joanna Briggs Institute's critical assessment guidelines for quasi-experimental studies were used for quality assessment. The meta-analysis was based on the inverse variance (IV) method (α=.05)., Results: A total of 18 laboratory studies were published between 2015 and 2022, with a total of 2160 specimens, all of which were analyzed qualitatively. The meta-analysis indicated significantly less optical alteration for lithium disilicate ceramics (P<.01; MD: 2.69; 95% CI: 2.00-3.39; I²=89%, P<.01), even when compared with resin-ceramics with polish or sealants (P<.01; MD: 2.45; 95% CI: 1.59-3.30; I²=87%, P<.01) and (P<.01; MD: 3.24; 95% CI: 2.02-4.47; I²=89%, P<.01), while there was no significant difference in surface roughness (P=.08; MD: -0.71; CI 95%: -1.52 to 0.09; I²=87%, P<.01) (P=.33; MD: -0.31; CI 95%: -0.94 to 0.32; I²=87%, P<.01), respectively., Conclusions: Resin-ceramics that have been polished or treated with sealants have lower color stability than glazed glass-ceramics; however, they are similar in terms of surface roughness., (Copyright © 2023 Editorial Council for The Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Objective: To evaluate the influence of dental anxiety on the perception of pain before and during endodontic treatments., Materials and Methods: The PRISMA checklist was followed. A search was conducted in Scopus, Medline/PubMed, The Cochrane Library, and Web of Science databases. Based on PECOS criteria, the first outcome was a possible association between pre-operative pain and anxiety. The second outcome was a possible association between intraoperative pain and anxiety. The type of studies was observational. The JBI Critical Appraisal Checklist was used to evaluate the methodological quality of articles. The certainty of the evidence was analyzed using the GRADE approach., Results: Four articles were included with a total of 471 patients. Two studies found a positive association between pain and pre-endodontic treatment anxiety. Three studies investigated the relationship between anxiety and intraoperative pain; two identified an extremely significant positive association. One article noted that anxiety influences pain expectancy. The studies were of good quality as assessed by the JBI Critical Appraisal Checklist for cross-sectional studies. However, the certainty of the evidence was considered low and very low., Conclusions: Dental anxiety can be directly associated with pre- and intraoperative pain during endodontic procedures., Clinical Relevance: It is necessary to identify patients with dental anxiety to employ therapies to bring their anxiety under control, avoiding the increase of endodontic infections, and the postponement and evasion of endodontic treatments., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Statement of Problem: Obtaining a passive and well-adapted framework is challenging when intraoral scanning edentulous arches with multiple implants. The trueness of the printed casts is unclear., Purpose: The purpose of this clinical study was to evaluate the trueness of frameworks made from conventional and printed casts regarding clinical passivity and misfit., Material and Methods: Ten participants with complete mandibular fixed implant-supported interim prostheses retained by 4 implants were included. Each participant had a conventional impression and a digital scan made. The digital scan was made using an innovative device. Both conventional and digital casts were made, and the virtual images were used for milling the digital framework in cobalt chromium alloy. All frameworks were evaluated for passivity and marginal vertical misfit with the single screw test, with 4 attempts consisting of the tightened screw position, a test with all screws tightened, and an interspersed tightening test. The Kruskal-Wallis test was used to evaluate the trueness of the tested device for framework construction through the single screw test on vertical marginal misfit in the conventional and printed groups (α=.008). The Friedman test was used to assess the effect of test type (α=.05), and the Wilcoxon test was used to identify group-to-group differences (α=.017)., Results: The absence of space between the framework and the abutments and interferences during its placement, as well as good stability, were observed clinically. In laboratory analysis, greater framework misfits were observed in the printed group compared with the conventional group when the single screw test was applied. Comparing the 3 tests used, the greatest misfits were observed when the framework was screwed onto the printed cast., Conclusions: The innovative device tested for the intraoral scanning of multiple implants had clinically acceptable accuracy for the construction of passive and adapted frameworks. The conventional cast was more accurate than the printed cast, with lower misfit values, in all tests., (Copyright © 2023 Editorial Council for The Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

The use of cyanoacrylate tissue adhesive for surgical wound closure has become increasingly popular in recent years and has shown efficacy. Therefore, the aim of this systematic review was to compare the effectiveness of cyanoacrylate adhesive as a substitute for conventional suture placement after extraction of impacted third molars. The PubMed/MEDLINE, Scopus, Cochrane, and gray literature databases were searched for randomized or controlled prospective clinical trials published up to October 2022 that compared the use of cyanoacrylate adhesive and conventional silk suture in third molar surgeries. The risk of bias of each study was assessed using the RoB 2 tool (revised Cochrane risk of bias tool for randomized trials). Five randomized clinical trials with a total of 236 patients were included. The most commonly evaluated outcomes were pain and bleeding. The type of adhesive used varied and included ethyl-2-cyanoacrylate, isoamyl 2-cyanoacrylate, and a mixture of n-butyl cyanoacrylate and 2-octyl cyanoacrylate. Compared with 3-0 silk suture, cyanoacrylate tissue adhesive resulted in lower levels of postoperative pain in 3 studies and lower rates of bleeding in all 5 studies. Thus, cyanoacrylate can be a good substitute for silk sutures for wound closure in intraoral surgeries., Competing Interests: No conflicts of interest reported.

Purpose: To evaluate bone loss, prosthodontics and biological complications, and implant survival rates of internal conical connections (ICC) compared with internal non-conical connection (INCC) implants., Methods: The systematic review was registered on PROSPERO (CRD42021237170). Meta-analysis was performed using standardized mean difference (SMD) for bone loss and risk ratio (RR) for implant survival and complication rates. Risk of bias analysis was evaluated using RoB 2.0, whereas the GRADE tool was used to evaluate the certainty of evidence. A systematic search of the PubMed, Web of Science, Embase, Cochrane, and ProQuest databases was performed independently by two reviewers for articles published up to March 2022. The search criteria had no language or publication date restrictions. Handsearching analysis was performed in the reference list of potential articles., Results: Twelve randomized clinical trials, including 678 patients and 1006 implants (ICC [n = 476]; INCC [n = 530]), were included. Meta-analysis revealed that ICC demonstrated a lower risk for marginal bone loss (SMD: -0.80 mm; p = 0.004) and prosthodontics complications (RR: 0.16; p = 0.01) than INCC. However, both internal connections demonstrated no significant difference in implant survival rates (RR: 0.54; p = 0.10) and biological complications (RR: 0.90; p = 0.82). The overall risk of bias revealed some concerns and a low risk of bias for most of the included studies. However, the certainty of evidence of outcomes was considered low to moderate., Conclusion: ICC may be considered a more favorable treatment option than INCC owing to greater preservation of peri-implant bone tissue and a lower probability of prosthodontics complications. However, well-conducted studies with long-term follow-up are warranted., (© 2023 by the American College of Prosthodontists.)

Purpose: This systematic review and meta-analysis aimed to compare the dental implant survival rate and marginal bone loss between patients with and without osteoporosis., Materials and Methods: This systematic review was registered in PROSPERO (CRD42022356377). A systematic search was performed using five databases: MEDLINE/PubMed, Web of Science, Scopus, Embase, and ProQuest for articles published up to July 2022. Additional searches in ClinicalTrials.gov and the reference lists of included studies were performed. The eligibility criteria comprised observational studies with a direct comparison between patients with and without osteoporosis, with a minimum follow-up of 1 year and 10 implants placed in each group, which consider data analysis based on implant level, without restrictions on period or language of publication. The meta-analysis was performed using RevMan 5.4 program. Risk of bias analysis of the included studies was performed using the Newcastle-Ottawa scale (NOS)., Results: Twelve studies met the eligibility criteria, totaling 1132 patients with a mean age range from 54 to 76.6 years. Most of the included patients were women (73.6%). A total of 3505 implants were evaluated-983 in patients with osteoporosis and 2522 in patients without osteoporosis. The meta-analysis indicated no difference in implant survival rates between patients with and without osteoporosis (OR, 1.78; 95% confidence interval [CI], 0.86-3.70; P = 0.12). However, significant bone loss was observed around dental implants placed in patients with osteoporosis (SMD, 0.71 mm; 95% CI, 0.06-0.87 mm). The NOS indicated a low risk of bias in the studies included. However, the certainty of the evidence was classified as very low and low for implant survival rates and bone loss, respectively., Conclusion: According to the limitations of the present review, the data suggest that dental implants are a viable treatment option for the rehabilitation of patients with osteoporosis. However, clinical care by professionals is necessary to ensure the maintenance of peri-implant bone stability, as these patients may be susceptible to increased bone loss., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objectives: We aimed (1) to systematically review the efficacy of transdermal nicotine patches (NP) for postoperative analgesia, (2) to establish the current quality of evidence and assist clinical decision-making on the subject, and (3) to identify methodological limitations and the need for more well-designed studies., Materials and Methods: We searched six electronic databases, protocol records, and other sources without date or language restriction until March 2022. To develop the search strategy, we formulated a clinical question by using the PICOD method. Eligibility criteria included randomised placebo-controlled trials on the analgesic potential of NP for surgical procedures. This systematic review followed the PRISMA 2020 statement, and we registered the protocol in PROSPERO (#CRD42020205956)., Results: We included 10 randomised placebo-controlled trials (535 patients). The NP administered before induction of anaesthesia and at beginning of surgery reduced the pain immediately after surgery (-0.38; 95% confidence interval [CI]: -0.73 to -0.02), and 6 h (-0.34; 95% CI: -0.68 to -0.01), 12 h (-0.43; 95% CI: -0.71 to -0.15) and 24 h (-0.35; 95%CI: -0.59 to -0.10) after surgery, compared with the placebo patch (PP) group. Sensitivity testing suggests that opioid use could underestimate NP analgesia. Late demand for the first analgesic and consumption of rescue analgesics tended to be lower in the NP group., Conclusions: The current findings suggest, with low certainty of evidence, the analgesic potential of NP for surgical procedures., Clinical Relevance: Perioperative use of NP significantly improved postoperative pain, even when opioids were administered or prescribed. Nevertheless, the clinical relevance should be interpreted with caution, owing to the effect sizes of the summary measures and methodological issues. The analgesic potential of NP as an adjuvant therapy to regulate pain and acute inflammation may offer certain clinical advantages, thus warranting further investigation., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Statement of Problem: A consensus on the clinical performance of implant-supported removable partial dentures (ISRPDs) is lacking., Purpose: The purpose of this systematic review and meta-analysis was to evaluate the clinical performance of ISRPDs in terms of the implant survival rates, marginal bone loss, and patient-reported outcome measures (PROMs)., Material and Methods: Four electronic databases (MEDLINE/PubMed, EMBASE, Web of Science, and Cochrane Library) were independently searched by 2 reviewers for articles published up to December 2020. A single-arm meta-analysis was performed to evaluate the implant survival rates and marginal bone loss by using the R program. The Cochrane collaboration tool was used to evaluate the risk of bias of randomized controlled trials (RCTs), and the Newcastle-Ottawa scale for non-RCT studies., Results: Sixteen studies were included, with a total of 334 participants and a mean age of 58 years. The participants received a total of 581 dental implants, 475 conventional and 106 mini-implants. All included studies reported implant survival rate above 90% (range: 92% to 100%). Meta-analysis indicated a high proportion of implant survival rates of 3% (95% confidence interval [CI]: 2% to 5%) and a low mean raw score of marginal bone loss 0.98 mm (CI: 0.61 to 1.36 mm). Compared with conventional RPDs, improved patient quality of life and satisfaction were reported by studies that evaluated ISRPDs. RCT studies exhibited a low risk of bias for most domains, while most non-RCT studies were classified as good quality., Conclusions: ISRPDs exhibited high implant survival rates and acceptable bone loss with improvement in the quality of life and satisfaction of patients when compared with conventional RPDs. Therefore, they can be considered suitable for the rehabilitation of partially edentulous patients., (Copyright © 2021 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Statement of Problem: Although conventional complete dentures are widely used, a systematic review of their influence on wearers' taste perception is lacking., Purpose: The purpose of this systematic review was to determine whether conventional complete dentures influence the taste perception of edentulous patients., Material and Methods: This systematic review was registered in the International Prospective Register of Systematic Reviews (PROSPERO) (CRD42022341567), and the guidelines of the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) were followed. The guiding question was: "Does the use of complete dentures influence the taste perception of edentulous patients?" Two reviewers searched articles in the PubMed/MEDLINE, Scopus, Cochrane Library, and https://clinicaltrials.gov databases up to June 2022. The risk of bias in each study was assessed using the risk of bias in nonrandomized studies of interventions and the risk of bias based on the Cochrane risk of bias tool for randomized trials. The certainty of evidence was assessed using grading of recommendations, assessment, development, and evaluation (GRADE)., Results: A total of 883 articles were found with the search, and 7 were included in this review. Various changes in taste perception were identified in some of these studies., Conclusions: The use of conventional complete dentures can influence the perception of the 4 primary tastes (sweet, salty, sour, and bitter) of edentulous patients, which may negatively interfere with the perception of flavor., (Copyright © 2023 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Statement of Problem: Laser phototherapy has been studied as a surface treatment capable of increasing the adhesion of cement to the ceramic surface. However, the bond strength of glass and resin-ceramics after laser phototherapy is unclear., Purpose: The objective of this systematic review and meta-analysis was to compare the bond strength of glass and resin-ceramics using laser therapy and conventional hydrofluoric acid etching., Material and Methods: This systematic review and meta-analysis followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) and was registered in the Open Science Framework (OSF) for in vitro studies. A population, intervention, control, and outcome (PICO) question was formulated: "Does phototherapy promote better bond strength in glass and resin-ceramics than conventional hydrofluoric acid etching?" A literature search was performed in PubMed/MEDLINE, Embase, Web of Science, Scopus, Cochrane Library, and ProQuest databases up to January 2023. The Joanna Briggs Institute critical assessment guidelines for quasi-experimental studies were used for quality assessment. The meta-analysis was based on the inverse variance (IV) method (α=.05)., Results: A total of 6 in vitro studies published between 2007 and 2019 with a total number of 348 specimens were included for qualitative analysis; 1 study had a positive effect. Five of the studies were included in the meta-analysis, which indicated a significant decrease for feldspathic ceramics that received laser phototherapy and lithium disilicate (P=.002; MD: -2.15; 95% CI: -3.53 to -0.77; I 2 =89%, P<.01) and (P<.01; MD: -2.13; 95% CI: -2.99 to -1.27; I 2 =82%, P<.01), respectively., Conclusions: Laser irradiation as surface etching of glass ceramics does not produce a bond strength equal to that of conventional hydrofluoric acid etching., (Copyright © 2023 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Statement of Problem: Providing a removable partial denture (RPD) can be a complex, time-consuming, and error-prone procedure. Computer-aided design and computer-aided manufacturing (CAD-CAM) techniques have shown promising clinical outcomes; however, the influence of manufacturing techniques on the properties of RPD components is unclear., Purpose: The purpose of this systematic review was to determine the accuracy and mechanical properties of RPD components fabricated with conventional and digital methods., Material and Methods: This study followed the guidelines of the Preferred Reporting Items for Systematic Review and Meta-analyses (PRISMA) and was registered on the international prospective register of systematic reviews (PROSPERO) database (CRD42022353993). An electronic search was conducted on PubMed/MEDLINE, Scopus, Web of Science, and the Cochrane Library in August 2022. Only in vitro studies comparing the digital with the lost-wax casting technique were included. The quality of the studies was assessed by using the methodological index for nonrandomized studies (MINORS) scale., Results: Of the 17 selected studies, 5 evaluated the accuracy of RPD components as well as the mechanical properties, 5 studies evaluated only the component accuracy, and another 7 evaluated only the mechanical properties. The accuracy was similar regardless of the technique, with discrepancies within clinically acceptable values (50 to 426.3 μm). The surface roughness was higher for 3D-printed clasps and lower for milled clasps (P<.05). The metal alloy significantly influenced the porosity, with the highest number of pores obtained by casting for Ti clasps and by rapid prototyping for Co-Cr clasps., Conclusions: In vitro studies showed that the digital technique provided similar accuracy to that of the conventional technique within a clinically acceptable range. The manufacturing technique influenced the mechanical properties of RPD components., (Copyright © 2023 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Statement of Problem: Proximal contact loss between implant-supported prostheses and adjacent natural teeth is a complication that has been reported in clinical practice. However, the prevalence of the condition is unclear., Purpose: The purpose of this systematic review and meta-analysis was to assess the proportion of reported proximal contact loss between implant-supported prostheses and adjacent natural teeth., Material and Methods: This systematic review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) methodology criteria and was registered on the international prospective register of systematic reviews (PROSPERO) platform (CRD42021225138). The electronic search was conducted by using the PubMed/MEDLINE, Embase, and Cochrane Library databases to September 2020. The formulated population, intervention, comparison, outcome (PICO) question was "Is there a correlation of the proximal contact loss between implant-supported prostheses and the adjacent natural tooth?" A single-arm meta-analysis of proportion was performed to evaluate the cumulative prevalence of survival and complication rates., Results: This review included 10 studies, half of which presented proximal contact loss rates higher than 50%. In the general analysis, the open proximal contact showed a cumulative proportion of 41% (confidence interval: 30% to 53%; heterogeneity: I 2 =98%; t 2 =0.578; P<.01). From the subanalysis, the mesial contact (47%; confidence interval: 32% to 62%; heterogeneity: I 2 = 96%; t 2 =0.657; P<.01) and the mandibular arch (41%; confidence interval: 30% to 52%; heterogeneity: I 2 =92%; t 2 =0.302; P<.01) were found to have higher prevalence., Conclusions: The prevalence of proximal contact loss was high, occurring more frequently with the mesial contact and in the mandibular arch. Significant differences were not found in relation to sex or between the posterior and anterior regions., (Copyright © 2021 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Background: The objective of this systematic review and meta-analysis (SRMA) was to investigate the influence of antimicrobial photodynamic therapy (aPDT) on the bond strength of endodontic sealers to intraradicular dentin., Methods: This SRMA followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) and was registered in the International Prospective Registry of Systematic Reviews (PROSPERO) (CRD42022319856). A population, intervention, control, and outcome (PICO) question was formulated: "Does antimicrobial photodynamic therapy decrease the bond strength of root canal sealers?". A literature search was performed in PubMed/MEDLINE, Embase, Web of Science, Scopus, Cochrane Library, and ProQuest databases until July 2022. Joanna Briggs Institute Critical Assessment Guidelines for Quasi-Experimental Studies were used for quality assessment. The meta-analysis was based on the inverse variance (IV) method (p<0.05)., Results: Out of an initial 345 articles, 8 in vitro studies were included, published between 2013 and 2022. The studies were qualitatively analyzed; two studies showed a positive effect, two studies a negative effect, and the other studies showed no effect on bond strength of endodontic sealers to intraradicular dentin. Seven of the studies were included in the SRMA, which indicated that there was no significant difference in bond strength when using aPDT (P = 0.90; MD: -0.03; 95% CI: -0.46 to -0.41). There was a high level of evidence for each meta-analysis outcome., Conclusion: It can be concluded that the use of aPDT as a method of root canal disinfection does not negatively influence the bond strength of endodontic sealers in the root canal., Competing Interests: Declaration of Competing Interest The authors declare no conflicts of interest., (Copyright © 2022. Published by Elsevier B.V.)

This article describes a technique for making complete-arch implant-supported fixed prostheses by using intraoral scanning and computer-aided design and computer-aided manufacturing (CAD-CAM) technology for the fabrication of a metal substructure and conventional processing for the prosthesis base. For this, a device was designed to accurately capture the position of multiple implants and the associated digitalized surgical guide, and the metal substructure was planned and milled directly in cobalt-chromium. The color of the gingiva and artificial teeth was selected by using the intraoral scanner software program, and the prosthesis base was processed conventionally. The straightforward methods used to fabricate the prostheses eliminated possible errors associated with conventional substructure casting and occlusal registration., (Copyright © 2021 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Statement of Problem: Monolithic ceramic implant-supported restorations have been used to rehabilitate partially edentulous patients. However, knowledge of the survival and prosthetic complications of single crowns (SCs) and fixed partial dentures (FPDs) is limited., Purpose: The purpose of this systematic review with meta-analysis was to evaluate the clinical performance of monolithic ceramic implant-supported SCs and FPDs in terms of survival and prosthetic complication rates., Material and Methods: The systematic review was registered on the prospective register of systematic reviews (PROSPERO) (CRD42017078568). Five electronic databases were independently searched by 2 authors for articles published until May 2022. In addition, a hand search was performed in the nonpeer-reviewed literature, specific journals, and reference lists of included articles. A single-arm meta-analysis was performed by using the R program. The risk of bias and quality were assessed using the Cochrane risk of bias tools and the Newcastle-Ottawa scale., Results: Twenty-eight studies were included in the quantitative synthesis. A total of 1298 monolithic ceramic implant-supported restorations (1116 SCs and 182 FPDs) were evaluated in 1193 participants, with a median observation time of 24 months (range: 12 to 72 months). Meta-analysis indicated the proportion of failures and prosthetic complication rates of 2% (95% confidence interval [CI]: 1% to 4%) for SCs. No difference was observed for monolithic zirconia and lithium disilicate SCs. In the FPDs, only monolithic zirconia was considered, with 1 failure reported totaling the proportion of failures of 0% (0% to 1%) and complication rates of 4% (0% to 12%). The most complications reported for both types of restorations were screw loosening, debonding, and minor chipping and were considered repairable. The included studies showed a low risk of bias and good quality., Conclusions: The use of monolithic ceramic implant-supported SCs, independent of ceramic material, and monolithic zirconia implant-supported FPDs should be considered an effective and safe treatment option because of favorable short-term survival and low prosthetic complications. However, additional well-conducted studies with a longer-term follow-up and direct comparison between veneered restorations are recommended to reassess clinical performance., (Copyright © 2022 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Statement of Problem: Denture adhesives are widely used products, but limited evidence regarding their toxicity is available., Purpose: The purpose of this scoping review was to map the existing literature on the toxic potential of denture adhesives., Material and Methods: This scoping review was structured based on the 5-step methodology proposed by Arksey and O'Malley and The Joanna Briggs Institute Manual for Evidence Synthesis and followed the Preferred Reporting Items for Systematic reviews and Meta-Analyses extension for Scoping Reviews. The methods were registered on the Open Science Framework (). The following research question was formulated: Are there any toxic effects related to the use of denture adhesives? The electronic literature search was performed independently by 2 authors in the following databases: PubMed/MEDLINE, Scopus, Web of Science, and the Cochrane Library. The inclusion criteria were in vitro and clinical studies; studies that evaluated the cytotoxic properties of denture adhesives as local or systemic implications; and studies published in English., Results: The search conducted in October 2020 provided 1099 articles. In total, 33 studies were included, 14 in vitro and 19 clinical studies. Commercially available denture adhesives have a dose-dependent cytotoxic effect on fibroblasts and keratinocytes, with poor cell recovery noted in older human fibroblasts. Patients presented different levels of neurologic or hematological alterations associated with the excessive use of denture adhesives., Conclusions: Most commercially available denture adhesives have a dose-dependent cytotoxic effect, and the use of well-adapted removable dental prostheses, proper patient follow-ups, and correct instructions for their use when indicated should be a priority., (Copyright © 2021 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Statement of Problem: The development of polymethyl methacrylate (PMMA) computer-aided design and computer-aided manufacturing (CAD-CAM) resin blocks with reported improved mechanical properties has simplified complete denture production. However, whether the objective of improved mechanical properties has been achieved compared with conventional heat-polymerized PMMA is not yet clear., Purpose: The purpose of this systematic review and meta-analysis was to evaluate the mechanical properties of denture base resins manufactured by conventional heat-polymerization and by CAD-CAM in terms of flexural strength, flexural modulus, and surface roughness., Material and Methods: Electronic databases (PubMed/MEDLINE, Scopus, Web of Science) were independently searched by 2 researchers for relevant studies published up to November 2020. The population, intervention, comparison, and outcome (PICO) question was, "Does the conventionally manufactured, heat-polymerized PMMA resin, as a denture base, demonstrate the same mechanical properties as the CAD-CAM resin block?" In addition, a meta-analysis was based on the inverse variance method. Flexural strength, flexural modulus, and surface roughness were analyzed through the continuous outcome evaluated by mean difference and standard deviation, with 95% confidence intervals. To evaluated heterogeneity, the I 2  value (≤25%=low, ≥50%=moderate and ≥75%=high) and the P value were considered. P<.10 indicated statistical difference for heterogeneity. The effects of meta-analysis were based on the results of heterogeneity as per the studies., Results: Thirteen in vitro studies were included in the analysis. A total of 507 specimens were evaluated, 222 conventional and 285 CAD-CAM. In terms of flexural strength, the data showed no significant difference when conventional heat-polymerized PMMA was compared with CAD-CAM PMMA resins (P=.06; mean difference=18.28; 95% confidence interval:-0.42 to 36.97). In terms of flexural modulus, there was a significant difference for the CAD-CAM PMMA group (P=.01; mean difference=589.22; 95% confidence interval: 117.95 to 1060.48). In terms of surface roughness, a significant difference was observed between the groups (P=.02; mean difference=-0.53; 95% confidence interval: -0.97 to -0.09) with the conventional heat-polymerized PMMA resin having higher surface roughness values., Conclusions: The mechanical properties of CAD-CAM PMMA resins were generally improved when compared with heat-polymerized polymethyl methacrylate resin., (Copyright © 2021 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Statement of Problem: Although recent studies have reported the success of implant-supported monolithic restorations, consensus on the use of monolithic ceramic restorations is lacking., Purpose: The purpose of this systematic review and meta-analysis was to evaluate the survival and biological and technical complication rates of monolithic single crowns and fixed partial dentures (FPDs)., Material and Methods: An electronic search was conducted by 2 independent authors on the PubMed/MEDLINE, Scopus, and Cochrane Library databases. The Newcastle-Ottawa scale and Cochrane risk of bias tool were used to assess the quality and risk of bias of the included studies. Meta-analysis was performed by using the R software program., Results: The search identified 763 articles, 18 of which met the eligibility criteria. A total of 15 studies evaluated monolithic ceramic single crowns, and 4 studies evaluated FPDs. The studies included 1061 monolithic single crowns (524 lithium disilicate, 461 zirconia, and 76 polymer-infiltrated ceramic network [PICN]) and 104 FPDs (36 lithium disilicate and 68 zirconia). Meta-analysis of single-arm studies indicated the proportion of survival, biological, and technical complication rates of 1% (95% confidence interval [CI]: 0% to 3%), 1% (CI: 0% to 4%), and 2% (CI: 1% to 4%), respectively, for single crowns, independent of ceramic material, and 3% (CI: 0% to 34%), 5% (CI: 1% to 21%), and 5% (CI: 1% to 21%) for FPDs, respectively. Only 5 studies performed a direct comparison between monolithic and veneered ceramic restorations, and no significant difference was observed in terms of survival (risk ratio [RR]: 0.68; CI: 0.25-1.91; P=.96), biological (RR: 0.69; CI: 0.31-1.53; P=.35), and technical complication rates (RR: 0.87; CI: 0.40-1.88; P=.29)., Conclusions: The use of monolithic ceramic can be considered a favorable treatment for tooth-supported single crowns and FPDs, with high survival and low complication rates. However, further randomized controlled trials are needed to reassess these clinical performances, mainly by comparing them with the performance of veneered restorations., (Copyright © 2021 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Objective: To perform a systematic review on the effects of listening to music in reducing preoperative anxiety and pain (intra or postoperative) in third molar extractions., Material and Methods: A systematic review modeled according to the PRISMA guidelines was conducted. The MEDLINE/PubMed, Cochrane Library, Embase, and Scopus databases were searched for relevant reports. To be included in the study sample, the studies were required to be randomized controlled trials (RCT) on the effects of listening to music on outcomes of third molar extraction. Two reviewers independently extracted the relevant data from the reports., Results: A total of 1882 studies were retrieved after the duplicates were removed. After applying the inclusion criteria, five studies were included for qualitative analysis. In 4 studies, music was played before and during the extraction of the impacted third molars. In one study, music was played only before the procedure. The genres varied from classic piano music to rock, pop, jazz, folk, and even hymns. Overall, music listening was beneficial for patients in reducing preoperative anxiety or anxiety during the procedure compared to control. However, only one study demonstrated a statistically significant decrease in systolic blood pressure., Conclusions: Music may be an effective non-pharmacological measure to reduce preoperative anxiety in patients scheduled for third molar extraction; however, the hemodynamic effects and the effects on pain (both perioperative and postoperative) should be further explored., Clinical Relevance: The side effects of certain medications may be avoided if listening to music is used in third molar extractions., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The systematic review tried to answer the following question: Does the melatonin administered systemically or topically ameliorate patients involved with oral health conditions or dental procedures? The systematic review has been registered in the PROSPERO (2021CRD42021095959). Eligibility criteria included only randomized controlled clinical trials (RCTs) with at least 10 participants that compared patients that received melatonin as a treatment before and/or after their oral intervention topically or systemically, with control patients. A search was performed in PubMed/MEDLINE, Web of Science, Cochrane Library, and Academic Google databases for articles up to February 2021. The Cochrane risk-of-bias tool for randomized clinical trials was used and revealed that the studies included presented low risk of bias for the majority of criteria assessed. It was selected 25 articles, of which only six did not demonstrate positive effects and three presented null effects with the use of melatonin. Melatonin has improved the inflammatory response in periodontal disease, dental surgeries, and mucositis of head and neck oncologic irradiated patients. In addition, it showed anxiolytic potential in patients that were submitted to dental procedures. In conclusion, melatonin favored the treatment of oral changes when used topically and systemically., (© 2021 Wiley Periodicals LLC.)