Search

Changing trends in the brewing market show that breweries want to attract consumers with new products. New flavours and aromas in beer can be achieved by using various additives. However, non-Saccharomyces yeast strains make it possible to produce beer with an original sensory profile but according to a traditional recipe (without additives). The aim of this study was to evaluate the influence of 10 different yeast strains, belonging to the species Lachancea thermotolerans and L. fermentati, on the creation of different physico-chemical profiles in beers. For this purpose, the same malt wort with a 12°P extract, hopped with Octawia hops (8.4% alpha acids), was inoculated with the aforementioned yeast strains. The fermentation kinetics, the yeast’s ability to ferment sugars, the production of organic acids and glycerol and the formation of volatile compounds in the beer were monitored. The beers obtained were classified as low-alcohol and regular. In addition, some beers were measured to have a low pH, qualifying them as “sour” beers, which are currently gaining in popularity. Most interesting, however, was the effect of the selected Lachancea yeast strains on the composition of the beer volatiles. In the second stage of this study, the beers obtained were again subjected to a chromatographic analysis, this time using an olfactometric detector (GC-O). This analysis was dictated by the need to verify the actual influence of the compounds determined (GC-MS) on the creation of the final aroma profile. This study showed that selected strains of Lachancea thermotolerans and L. fermentati have very high brewing potential to produce different original beers from the same hopped wort.

Keeving is the removal of nutrients from apple musts due to their binding to pectin, resulting in a slower fermentation and spontaneous arrest. The aim of this study was to determine the effect of keeving on the chemical composition of fermented apple must and on the volatile profile and sensory analysis of apple brandies. We compared the application of keeving during spontaneous fermentation with fermentation carried out by Saccharomyces cerevisiae (SafSpirit HG-1). We evaluated the impact of adding different doses of calcium chloride on various parameters of fermented musts and distillates. Calcium chloride had a greater effect on the ethanol concentration, total extract, and fermentation efficiency than on the type of fermentation used. However, a different phenomenon was observed with respect to the volatiles. The concentration of most of the higher alcohols, acetaldehyde, dodecanal, and geranylaceton, decreased after spontaneous fermentation and increased during the fermentation carried out with Saccharomyces cerevisiae SafSpirit HG-1. In general, the application of keeving contributed to a decrease in the concentration of ethyl and methyl esters, but caused an increase in the concentration of all acetate esters and terpenoids. When the amount of nutrients in the environment is limited and starvation occurs, microorganisms use the available nutrients for basic metabolic processes that allow them to survive and limit the formation of side metabolites such as volatiles. However, most of the samples fermented after the faecal depletion achieved high scores for the floral, fruity, and “overall note” parameters in the sensory analysis. This means that this method, carried out with a properly selected yeast strain, could be feasible for the distilling industry.

There is considerable interest in the use of essential oils for food preservation, but their effect on the aroma profile of a product is poorly understood. This study investigated the effect of thyme essential oil (EO) addition at increasing concentrations (0.005, 0.01, 0.02, and 0.03% v/w) on the volatile compound composition of vacuum-packed minced turkey meat after storage for 8 days at 1–2 °C. The aroma profile of the meat was determined using the HS-SPME/GCMS (headspace solid-phase microextraction/gas chromatography–mass spectrometry) method. The results were also analysed by PCA (principal component analysis). The addition of thyme EO had a modifying effect on the aroma profile of meat-derived components, e.g., the formation of benzeneacetaldehyde, benzyl alcohol, 4,7-dimethylbenzofuran, hexathiane, hexanal, and 1-hexanol was reduced and the appearance of 9-hexadecenoic acid was observed in the stored samples. The increase in EO concentration affected the levels of its individual components in the meat headspace in different ways. In terms of fat rancidity indices, even a 0.005% addition of this essential oil significantly reduced the peroxide value. Quantitative descriptive analysis (QDA) showed that the addition of thyme EO reduced or masked the intensity of unpleasant odours associated with meat spoilage. In the aroma analysis, the turkey with 0.02% v/w EO scored highest, and pleasant citrus notes were found.

Changing consumer preferences and increasing demands require adjustments in brewery operations and beer production methods. Recent trends indicate a marked decline in interest in high-alcohol beers and an increasing demand for low- and no-alcohol alternatives. The aim of this study was to evaluate and compare the volatile compound profiles produced by Saccharomyces cerevisiae var. chevalieri, a yeast strain specifically developed for non-alcoholic beer production, with a reference sample fermented with a standard Saccharomyces cerevisiae US-05 strain. Two mashing profiles were compared (with and without saccharification pause). The wort obtained was fermented with and without hops. The chemical composition and aroma compounds of the resulting beers were analysed using different chromatographic techniques (HPLC, GC-FID, GC-MS and CG-O). The modification of the mashing profile helped to obtain wort with about 50% lower maltose content. A lower FAN (free amino nitrogen) content was also observed, but this did not affect the fermentation process. Beers fermented with the Saccharomyces cerevisiae var. chevalieri strain had an average alcohol content of 0.5–0.8% v/v. This strain consumed about 25% of the available maltose. The resulting beers were dominated by fruity, floral and herbal aromas. In addition, beers fermented with a non-alcoholic beer strain scored highest in the sensory analysis.

The aim of this research was to determine the influence of yeast strains (previously isolated from the fermentation process) on selected quality parameters of sauerkraut. For this purpose, shredded and salted (2.5% w/w) cabbage of the Galaxy variety was fermented in the absence of oxygen with the addition of 2 × 106 cells of a selected yeast culture. The control sample was spontaneously fermented sauerkraut without yeast addition. The obtained sauerkraut was analysed in terms of the content of selected organic acids, sugars and polyols (HPLC), selected volatile compounds (HS-SPME-GC-TOFMS), colour (CieLAB) and aroma (QDA). Yeast P. fermentans, Rh. mucilaginosa and W. anomalus reduced crucial sauerkraut components such as lactic acid, glycerol, and certain volatile compounds, leading to decreased aroma intensity and acceptability. Additionally, an increase in glucosinolate decomposition products was observed. Conversely, D. hansenii positively influenced sauerkraut quality by enhancing lactic acid content and exhibiting similar volatile characteristics to those of the control. Two of the three samples fermented with D. hansenii received high sensory analysis scores akin to those of the control. Sauerkraut fermented with Cl. lusitaniae yeast contained elevated levels of volatile compounds—alcohols, esters and lactones—resulting in an intense floral aroma, albeit receiving lower overall ratings due to deviation from the typical profile.

In recent years, there has been a significant decline in interest in high-alcohol beers, while interest in low- and non-alcohol beers is growing. The aim of this study was to investigate the influence of the addition of coriander seeds at various stages of the production of low-alcohol wheat beer (mashing, boiling, and fermentation). The presented article uses biological methods to produce low-alcohol beer. For this purpose, first, the mashing process was modified (breaking 44 °C for 20 min, followed by 75 °C for 60 min). The chemical composition and aroma components of the obtained beers were determined using various chromatographic methods (HPLC, GC-MS, and GC-O). Differences were found between the aroma components depending on the stage of production at which the coriander seeds were added. Beers with the addition of coriander seeds at the fermentation stage had the highest terpene content (linalool, camphor, trans-linalool oxide, and γ-terpinene) and boiling (myrcene, limonene, citronellol, and geraniol). The least desirable process is the addition of coriander seeds at the mashing stage due to the lowest content of volatile compounds. Additionally, beers with the addition of coriander seeds for fermentation were characterized by a higher content of antioxidant compounds. This proves that the addition of coriander seeds during beer production could improve the fermentation process and modify the quality of the obtaining beer.

The aim of this study was to compare the yeast microbiota occurring during cabbage fermentation, along with selected parameters important for the quality of sauerkraut, depending on the vessel used. For this purpose, glass jars were used, in which anaerobic conditions are quickly created, and stoneware vessels, whose appearance and characteristics are similar to tanks used on an industrial scale. WL nutrient agar with chloramphenicol and 10% NaCl was used to enumerate yeast. Isolates were differentiated using RAPD-PCR and identified by sequencing of the 5.8S-ITS rRNA gene region and PCR-RFLP. Selected organic acids, sugars, and polyols were analyzed using UHPLC-UV-Vis and -RI. Sauerkraut obtained in stoneware vessels was characterized by the presence of a larger amount of yeast, including those considered spoilage, such as Rhodotorula and Wickerhamomyces. It also contained 50% less lactic acid and a few times more acetic acids than that obtained using glass jars. A pH around 3.8 and 1.5% lactic acid, which are parameters indicating the end of fermentation of sauerkraut, were obtained in glass jars on the tenth day of fermentation. The yeast Wickerhamomyces anomalus may be an indicator of the presence of oxygen during sauerkraut fermentation, while Clavispora lusitaniae may indicate anaerobic conditions.

The interest in new beer products, which has been growing for several years, forces technologists and brewers to look for innovative raw materials, such as hops, new sources of carbohydrates or yeast. The aim of the presented study was to evaluate the effect of selected Saccharomyces (Saccharomyces paradoxus (CBS 7302), S. kudriavzevii (CBS 3774), S. cerevisiae (Safbrew T-58)) and non-Saccharomyces yeast (W. anomalus (CBS 5759), Ha. uvarum (CBS 2768), D. bruxellensis (CBS 3429), Z. bailii (CBS 749), and T. delbrueckii (D10)) on the fermentation process, basic parameters and odour-active compounds of the produced beers. The chemical composition and key aroma components of the obtained beers were determined using various chromatographic methods (HPLC, GC-FID, GC-MS, and GC-O). We showed large differences between the key aroma components depending on the culture of microorganisms used. Forty different compounds that have an active impact on the creation of the aroma of beers were detected, among which the most important are: β-phenylethanol, ethyl hexanoate, ethyl 4-methylpentanoate, ethyl dihydrocinnamate and β-damascenone. We also found the presence of components specific to the yeast strain used, such as 2-methoxy-4-vinylphenol, γ-decalactone, methional, nerolidol and others. Among the analyzed yeasts, S. kudriavzevii and W. anomalus should be distinguished, which produced beers with intense fruity and floral aromas and were also characterized by favorable features for brewing. The Z. bailii strain also turned out to be interesting as a potential starter culture for the production of low-alcohol beers, significantly differing in sensory characteristics from the standard ones.

The purpose of the study was to evaluate the impact of the Saccharomyces cerevisiae and S. kudriavzevii mixed culture on the fermentation, chemical and aromatic composition of semi-sweet white wines. The variables tested in the experiment were the initial ratio of yeast in mixed cultures and the time of inoculation of the S. kudriavzevii co-culture. The addition of S. kudriavzevii to the inoculum did not significantly change the chemical composition of the wines obtained. No reduction in ethanol yield was found in mixed culture fermented wines; however, in some variants of the experiment, the ethanol content was higher. The mixed cultures of S. cerevisiae and S. kudriavzevii increased the level of volatile compounds in white grape wines. Wines fermented with the co-culture of S. kudriavzevii were characterized by a more diversified ester profile. The mixed cultures of S. cerevisiae and S. kudriavzevii raised the levels of terpenes in white wines. The most promising results were obtained for mixed culture variants, in which S. kudriavzevii was sequentially inoculated on the sixth day of fermentation.

Yeast plays a key role in the production of alcoholic beverages. Effective fermentation requires appropriate conditions to ensure the production of high-quality beer. The paper discusses the effect of dry brewing yeast (Saccharomyces cerevisiae and Saccharomyces pastorianus) after rehydration with water exposed to low-temperature, low-pressure glow plasma (PTW) in the atmosphere of air (PTWAir) and nitrogen (PTWN) in the course of the fermentation process, the formation of volatile compounds and other quality parameters of the finished beer. The obtained results show that the lager yeast strain initiated the process of fermentation faster after rehydration in the presence of PTWAir compared to all of the other treatments. It was observed that PTWAir significantly changed the composition of volatile compounds in the finished beer, especially by increasing the number of terpenes, which are compounds that positively shape the aroma of beer. In the case of PTWN samples, lower alcohol content, real extract, apparent extract and amount of biomass were observed in all analyzed strains.

The increasing popularity of active dry yeast arises from its properties, such as ease of storage, and simplicity of preparation and dosing. Herein, we elaborate on the effect of plasma-treated water (PTW) under air atmosphere (PTWAir) and nitrogen (PTWN) on the improvement of the reserve polysaccharide glycogen level and other quality parameters of S. cerevisiae brewing dry yeast in comparison with the non plasma-treated water (CW). For this purpose, strains of top-fermenting (S. cerevisiae T58 (poor quality), S33 (poor quality)) and bottom-fermenting (S. pastorianus W30/70 (poor quality)) yeast stored one year after opening and S. cerevisiae US-05 (fresh strain) were selected to examine the influence of PTWs toward the quality parameters of yeast biomass after the rehydration and fermentation process. The obtained results showed that in the case of poor quality yeast strains, PTWAir increased glycogen content after the rehydration and fermentation process, which was a favorable trend. A similar increase was observed for the trehalose content. Results showed that PTWN significantly reduced the number of yeast cells in ale strains and the viability of all analyzed samples. The lowest viability was observed in Sc S33 strain for PTWAir (41.99%), PTWN (18.6%) and CW (22.86%). PTWAir did not contribute to reducing the analyzed parameter; in particular, the results of Sc T58 yeast strain’s viability are shown: PTWAir (58.83%), PTWN (32.28%) and CW (43.56%). The obtained results suggest that rehydration by PTWN of dry yeast with a weakened condition is not recommended for both qualitative and cost-related reasons, while PTWAir significantly contributed to the improvement of some yeast parameters after rehydration and fermentation (higher glycogen and trehalose content).

Plasma processing is now a key technology across the world, and nonthermal low-temperature plasmas are being increasingly used. This situation can be explained by a rapidly growing interest in the optimization of existing methods, as well as the development of new ones. Over the last few years, the production of plasma-treated water (PTW) by low-temperature low-pressure glow plasma (LPGP) under an atmosphere of various gases has been increasingly gaining in popularity. Research has been conducted on producing plasma-treated water in the presence of air, nitrogen, ammonia, carbon dioxide, and methane. All the obtained results show that the changed physicochemical properties of the water depend on the type of gas used and the duration of the plasma treatment. New research is emerging on the possibility of using this water in plant breeding, animal husbandry, cosmetology, medicine, and food. For the first time, plasma-treated water has also been tested for use in the brewing industry at the raw material preparation stage. The results obtained in all branches of science are very promising, contributing to the growing interest in plasma-treated water within the scientific community.

Quality of plum jerkum is significantly associated to the profile of volatile compounds. Therefore, we decided to assess the impact of various fermentation types on selected properties of plum jerkums, especially compounds which contribute to the aroma of the finished product. We used the following yeast strains: S. cerevisiae S1, H. uvarum H2, and Ethanol RED (S. cerevisiae). Moreover, we considered spontaneous fermentation. S. cerevisiae and H. uvarum strains were isolated during the fermentation of Čačanska Lepotica or Węgierka Dąbrowicka (plum cultivars), respectively. As for fermentation type, spontaneous fermentation of H. uvarum H2 provided the best results. It could be associated to the fact that plum juices fermented with H. uvarum H2 presented the highest concentration of terpenoids, esters, or some higher alcohols. In the current paper, application of indigenous strains of yeasts resulted in the required oenological characteristics, e.g., highest fermentation efficiency and concentration of ethanol was determined in juices fermented with Ethanol RED (S. cerevisiae) and also with S. cerevisiae S1. Our results suggested that indigenous strains of yeasts present in plums demonstrate great potential for the production of plum jerkums of high quality.

Interest in the use of non-Saccharomyces yeast in mixed cultures is increasing due to the perceived improvement in the quality and complexity of the resulting wines. The aim of the study was to determine the ability of monocultures and mixed yeast cultures for deacidification and improvement of the composition of cold climate grape wines. Fermentation of grape musts with increased total acidity was carried out with the use of monocultures of Saccharomyces cerevisiae MH020215 (Sc), Zygosaccharomyces bailii 749 (Zb) and Metschnikowia pulcherrima MG970690 (Mp), and their mixed cultures, inoculated simultaneously and sequentially. Oenological parameters, organic acids and volatile compounds profiles of obtained wines were characterized. The fermentation kinetics and analytical profiles of the obtained wines showed that the use of mixed yeast cultures contributed to the reduction of volatile acidity and acetic acid content in the wines, as well as obtaining a favorable aromatic profile of the wines. The dominant higher alcohols in all wines were 2-methyl-1-propanol, 3-methyl-1-butanol and 2-methyl-1-butanol. Significantly higher amounts of the first two compounds were found in wines obtained with M. pulcherrima MG070690, both in monoculture and in mixed cultures. The monocultures of M. pulcherrima MG070690 (Mp) compared with Z. bailli 749 (Zb) synthesized higher levels of esters in wines, including ethyl acetate, ethyl propionate, isobutyl acetate, ethyl pyroracemate and isoamyl acetate.

The influence of fruit varieties on yeast ecology during spontaneous plum mash fermentation was investigated. Yeast colonies were isolated from mashes obtained from four plum varieties throughout fermentation in laboratory conditions during two consecutive years. The yeast strains were differentiated by random amplification of polymorphic DNA (RAPD-PCR) and identified by the 26S rDNA D1/D2 sequence analysis. Hanseniaspora uvarum, Metschnikowia spp. and Pichia kudriavzevii were the dominant yeasts during the early stages of plum mash fermentation, while the middle and end phases were dominated by Saccharomyces cerevisiae. The strains of Candida sake, Nakazawaea ernobii, Pichia kluyveri, Rhodotorula mucilaginosa and Wickerhamomyces anomalus were also detected in fermenting plum mashes. Metschnikowia sp. M1, H. uvarum H1 and H2 strains were detected in all samples, irrespective of the tested variety and year. Investigation of the impact of individual yeast strains on the production of volatile compounds showed the potential possibility of using them as starter cultures.

Qualitative and quantitative profiles of volatiles in alcoholic beverages depend mainly on the quality of raw materials, yeasts used for fermentation, and processing technique. Saccharomyces bayanus is a yeast species which is not commonly used for the production of alcoholic beverages, but it is able to produce volatiles that add desirable aroma. Since there is little information regarding the application of that microorganism for the production of apple brandies and how it affects volatile profile of finished products, we decided to address that issue. The aim of the study was to determine the impact of S. bayanus on the profile of volatile compounds and sensory properties of apple spirits obtained from three apple cultivars (Topaz, Rubin, and Elise) in comparison to spirits obtained from fermentation carried out spontaneously or with Saccharomyces cerevisiae. Obtained brandies were analysed using gas chromatography–flame ionization detector (GC–FID), solid phase microextraction–gas chromatography–mass spectrometry (SPME–GC–MS) and sensorially. In our study, brandies produced from musts fermented by S. bayanus demonstrated the highest concentration of ethyl esters and increased concentrations of isoamyl acetate, 2-phenylethyl acetate, ethyl palmitate and hexanol. Moreover, our results support the hypothesis that non-Saccharomyces yeasts which are present during spontaneous fermentation and demonstrate higher β-glucosidase activities enhance aroma of alcoholic beverages through releasing aroma compounds from glycosidic forms, e.g., α-phellandrene, (E)-β-fanesene, (Z,E)-α-farnesene, α-farnesene, and farnesol. Considering results obtained in sensory analysis, we proved that S. bayanus is suitable for the production of apple brandies, improving their flavour. Brandies obtained from musts fermented by S. bayanus obtained the highest average range for “overall note” parameter in sensory analysis.

Volatile profile of spirits is the most important factor, because it can contribute to pleasant flavor. The aim of the study was to determine the impact of dessert apple cultivar used for fermentation on the concentration of volatile compounds in apple spirits. SPME-GC-MS (solid-phase microextraction- gas chromatography- mass spectrometry) method enables the detection of 69 substances and GC-FID (gas chromatography - flame ionization detector) 31 compounds. Characteristic volatiles for brandies obtained from Topaz were limonene, myrcene, methyl valerate and 1,1-diethoxy-propane, from Rubin—β-citronellol and isopropyl acetate, Elise—limonene, myrcene benzyl acetate and isopropyl acetate, Szampion—β-citronellol, Idared—1,1-diethoxy-propane and Jonagored—ethyl trans-4-decanoate. Of the ten analyzed apple spirits, those obtained from Topaz, Rubin and Elise cultivars demonstrated the most diverse profile of volatile compounds. Moreover, their oenological parameters that are the most important in the production of alcoholic beverages were the most favorable. On the other hand, the content of sugars was relatively low in Elise must, while it was highest in Topaz must, which later on translated into differences in alcohol content. Brandies obtained from Gloster contained the smallest concentrations of esters and terpenes. Results of the sensory analysis showed that highest rated brandies were obtained from Topaz, Rubin, Elise and Florina.

The yeast microbiota occurring on different varieties of grapes grown in cool-climate is not completely researched. Therefore, its identification is important to research. On the other hand, yeasts occurring in these fruits can be potentially used as starter cultures to obtain particularly demanded features in the production of wine. In addition, rapid methods for yeast identification allow to eliminate the contamination with pathogenic yeasts, which could cause the loss of wine production. The aim of the study was to isolate and identify the yeasts occurring on the surface of the different varieties of white and red grapes, grown in cool-climate of Poland. Also, the aim was to compare the qualitative and quantitative composition of yeasts on the tested grapes. The 84 cultures of yeasts were isolated, that were initially macroscopic and microscopic analyzed and the purity of cultures was rated on the WL medium. Identification of yeasts by PCR-RAPD was carried using the M13 primer. In the PCR-RFLP method ITS1 and ITS4 primers, as well as restriction enzymes HhaI, HinfI, HaeIII, were used. Preliminary identification of yeasts by standard methods produced results very different from the results obtained by molecular methods. Among the isolated microorganisms yeasts were dominating, but bacteria and molds were also present. Using the PCR-RAPD method most strains of yeasts were identified. Yeast microflora of different varieties of white and red grapes was very similar as the same species of yeasts were identified. Yeasts of the genus Saccharomyces were present in all varieties of grapes. The Rhodotorula mucilaginosa, Saccharomyces cerevisiae, Metschnikowia pulcherrima, Rhodotorula minuta, Pichia kluyveri, Hanseniaspora uvarum and Rhodotorula mucilaginosa were identified by PCR-RAPD. 4 of the 33 tested strains of yeasts were identified by PCR-RFLP. By PCR-RAPD only Hanseniaspora uvarum was identified. The quantity and quality of microorganisms living on the surface of grape fruits is very important for the process of winemaking. Yeasts influence the course of alcoholic fermentation, the flavor, aroma, and thus the quality of the produced wine. To a large extent their presence depends on the condition of the surface of the fruit. Many researchers reported significant differences between yeast microflora in grapes of Mediterranean and cool-climate vineyards. As they are expected to affect the final wine properties precise researching of the microflora of cool-climate grapes may lead to the isolation of new species of yeasts and thus the wines with unique characteristics can be obtained.

The scope of the experiments included analysis of the antimicrobial activity of ethanolic, methanolic and aqueous extracts against bacterial and fungal cultures and determination of the minimum inhibitory concentration of plant extracts tested microbial growth. Analysis of the antifungal and antibacterial activity was carried out by the disc diffusion method using paper discs. In the experiment 11 species of microorganisms – 8 bacterial and 3 fungal strains were used. The highest antimicrobial activity against the tested strains was demonstrated by black elder (Sambucus nigra L.), black locust (Robinia pseudoacacia L.) and lingonberry (Vaccinium vitis-idaea L.) extracts. The study showed the diverse morphological activity of specific parts of elderberry and quince, which is the effect of different polyphenolic profile of these plants. The yeast Saccharomyces cerevisiae, Escherichia coli, Pseudomonas putida and Bacillus subtilis showed the highest sensitivity to the effect of extracts of the analysed plants. As a positive control three antibiotics – amphotericin B, vancomycin and amoxicillin with clavulanic acid were used.

Growing consumer interest in new beer flavors is contributing to the application of innovative materials and non-Saccharomyces yeast in brewing. The goal of this study was to test the impact of the low lactic acid-producing Lachancea thermotolerans MN477031 strain on the process of fermenting beer wort, with two different concentrations of bitter compounds, and on the quality of the beer produced. Qualify factors were broadly analyzed, including ethanol content, apparent degree of fermentation, sugars, organic acids, free amino nitrogen, glycerol, volatile compounds, ions and so on. It was proven that the L. thermotolerans MN477031 strain demonstrated a high capacity for rapid initiation of wort fermentation, and a tolerance to hop-derived compounds. As a result, the alcohol content in beer from this method of production was approximately 20% lower, while the content of the real extract was significantly higher in comparison to commercial Safbrew T-58. This strain stands out from many strains of L. thermotolerans due to the low lactic acid production and only marginal influence on pH decrease compared to Saccharomyces cerevisiae. Therefore, the potential of MN477031 in the production of different types of beer (not only sour) is very high. The composition of volatile compounds in L. thermotolerans beer differs—not only in terms of the use of the strain, but also in hop variety.

The aim of this study is to determine the quality of water treated with low-temperature, low-pressure glow plasma, either in the air or under nitrogen, in order to obtain high-quality brewer’s malt. To this end, plasma-treated spring water was used for barley grain soaking. In two-row spring barley grain, the procedure provided significantly higher water uptake capacity and grain sensitivity to water, as well as energy and germination capacity. The resulting malt showed improved moisture and 1000-grain mass. Furthermore, laboratory wort produced from the malt by the congress method did not differ statistically from a control sample in terms of filtration time, pH, turbidity, color, extract, free amino nitrogen compounds, and aromatic composition.

The aim of this work is to establish the antioxidant properties of polyphenolic compounds of selected fruits before and after their transformations during digestion. The experiment was conducted in in vitro conditions on a set of dialysis membranes which simulated the human digestive tract. Apples of the Šampion, Malinowka and Golden Delicious cultivars, black chokeberry, banana, Wegierka zwykla blue plum, melon and Lukasowka pear were chosen for examination. It was found that compounds obtained after simulated digestion of chokeberries, pears and bananas showed lower antioxidant potential than fresh fruits, while the opposite results were obtained for apples and plums. All dialysates obtained after digestion were characterized by lower content of total polyphenols in comparison with raw material (fresh fruits). It was found that the polyphenols were hydrolyzed, especially glycosides of quercetin and cyanidin. Phenolic acids and cyanidin were characterized by low availability for absorption, whereas catechin and quercetin had a very high level of accessibility in the model small intestine.