Search

Common belief is that the large band shifts observed in incommensurate misfit compounds, e.g. (LaSe)1.14(NbSe2)2, are due to interlayer charge transfer. In contrast, our analysis, based on both ARPES measurements and a specialized ab initio framework employing only quantities well defined in incommensurate materials, demonstrates that the large band shifts instead reflect changes in valence band hybridization and interlayer bonding. The strong alignment of our ab initio predictions and ARPES measurements confirms our understanding of the incommensurate electronic structure and charge transfer., Comment: 6 pages, 4 figures, Supplemental Materials included as pdf in LaTeX package

A key open question in the study of layered superconducting nickelate films is the role that hydrogen incorporation into the lattice plays in the appearance of the superconducting state. Due to the challenges of stabilizing highly crystalline square planar nickelate films, films are prepared by the deposition of a more stable parent compound which is then transformed into the target phase via a topotactic reaction with a strongly reducing agent such as CaH$_2$. Recent studies, both experimental and theoretical, have introduced the possibility that the incorporation of hydrogen from the reducing agent into the nickelate lattice may be critical for the superconductivity. In this work, we use secondary ion mass spectrometry to examine superconducting La$_{1-x}$X$_x$NiO$_2$ / SrTiO$_3$ (X = Ca and Sr) and Nd$_6$Ni$_5$O$_{12}$ / NdGaO$_3$ films, along with non-superconducting NdNiO$_2$ / SrTiO$_3$ and (Nd,Sr)NiO$_2$ / SrTiO$_3$. We find no evidence for extensive hydrogen incorporation across a broad range of samples, including both superconducting and non-superconducting films. Theoretical calculations indicate that hydrogen incorporation is broadly energetically unfavorable in these systems, supporting our conclusion that hydrogen incorporation is not generally required to achieve a superconducting state in layered square-planar nickelates., Comment: 23 pages, 21 figures (including supplemental information)

Infinite-layer nickelates $R_{1-x}$Sr$_{x}$NiO$_{2}$ ($R$ = La, Pr, Nd) are a class of superconductors with structural similarities to cuprates. Although long-range antiferromagnetic order has not been observed for these materials, magnetic effects such as antiferromagnetic spin fluctuations and spin-glass behavior have been reported. Different experiments have drawn different conclusions about whether the pairing symmetry is $s$- or $d$ wave. In this paper, we applied a scanning superconducting quantum interference device (SQUID) to probe the magnetic behavior of film samples of three infinite-layer nickelates (La$_{0.85}$Sr$_{0.15}$NiO$_2$, Pr$_{0.8}$Sr$_{0.2}$NiO$_2$, and Nd$_{0.775}$Sr$_{0.225}$NiO$_2$) grown on SrTiO$_3$ (STO), each with a nominal thickness of 20 unit cells. In all three films, we observed a ferromagnetic background. We also measured the magnetic susceptibility above the superconducting critical temperature in Pr$_{0.8}$Sr$_{0.2}$NiO$_2$ and La$_{0.85}$Sr$_{0.15}$NiO$_2$ and identified a non-Curie-Weiss dynamic susceptibility. Both magnetic features are likely due to NiO$_x$ nanoparticles. Additionally, we investigated superconductivity in Pr$_{0.8}$Sr$_{0.2}$NiO$_2$ and Nd$_{0.775}$Sr$_{0.225}$NiO$_2$, which exhibited inhomogeneous diamagnetic screening. The superfluid density inferred from the diamagnetic susceptibility in relatively homogeneous regions shows $T$-linear behavior in both samples. Finally, we observed superconducting vortices in Nd$_{0.775}$Sr$_{0.225}$NiO$_2$. We determined a Pearl length of 330 $\upmu$m for Nd$_{0.775}$Sr$_{0.225}$NiO$_2$ at 300 mK both from the strength of the diamagnetism and from the size and shape of the vortices. These results highlight the importance of considering NiO$_x$ particles when interpreting experimental results for these films.

Charge order pervades the phase diagrams of many quantum materials where it competes with superconducting and magnetic phases, hosts electronic phase transitions and topological defects, and couples to the lattice generating intricate structural distortions. Incommensurate charge order is readily stabilized in manganese oxides where it is associated with anomalous electronic and magnetic properties, but its nanoscale structural inhomogeneity complicates precise characterization and understanding of these phases. Leveraging atomic-resolution variable temperature cryogenic scanning transmission electron microscopy (cryo-STEM), we characterize the thermal evolution of charge order in a model manganite system, finding that mobile networks of topological defects generate phase inhomogeneity and induce incommensuration in an otherwise lattice-locked modulation. The melting of charge order at high temperatures is accompanied by generation of additional defects which decouple large areas of the order from the lattice., Comment: 14 pages, 6 figures

Progress in the study of infinite-layer nickelates has always been highly linked to materials advances. In particular, the recent development of superconductivity via hole-doping was predicated on the controlled synthesis of Ni in a very high oxidation state, and subsequent topotactic reduction to a very low oxidation state, currently limited to epitaxial thin films. Here we demonstrate a process to combine these steps with a heterostructure which includes an epitaxial soluble buffer layer, enabling the release of freestanding membranes of (Nd,Sr)NiO2 encapsulated in SrTiO3, which serves as a protective layer. The membranes have comparable structural and electronic properties to that of optimized thin films, and range in lateral dimensions from millimeters to ~100 micron fragments, depending on the degree of strain released with respect to the initial substrate. The changes in the superconducting transition temperature associated with membrane release are quite similar to those reported for substrate and pressure variations, suggestive of a common underlying mechanism. These membranes structures should provide a versatile platform for a range of experimental studies and devices free from substrate constraints.

We present an integrated procedure for the synthesis of infinite-layer nickelates using molecular-beam epitaxy with gas-phase reduction by atomic hydrogen. We first discuss challenges in the growth and characterization of perovskite NdNiO$_3$/SrTiO$_3$, arising from post growth crack formation in stoichiometric films. We then detail a procedure for fully reducing NdNiO$_3$ films to the infinite-layer phase, NdNiO$_2$, using atomic hydrogen; the resulting films display excellent structural quality, smooth surfaces, and lower residual resistivities than films reduced by other methods. We utilize the in situ nature of this technique to investigate of the role that SrTiO$_3$ capping layers play in the reduction process, illustrating their importance in preventing the formation of secondary phases at the exposed nickelate surface. A comparative bulk- and surface-sensitive study indicates formation of a polycrystalline crust on the film surface serves to limit the reduction process., Comment: Main text: 12 pages, 7 figures. Supplemental Materials: 11 pages, 11 figures

The charge density wave (CDW) material 1T-TaS$_2$ exhibits a pulse-induced insulator-to-metal transition, which shows promise for next-generation electronics such as memristive memory and neuromorphic hardware. However, the rational design of TaS$_2$ devices is hindered by a poor understanding of the switching mechanism, the pulse-induced phase, and the influence of material defects. Here, we operate a 2-terminal TaS$_2$ device within a scanning transmission electron microscope (STEM) at cryogenic temperature, and directly visualize the changing CDW structure with nanoscale spatial resolution and down to 300 {\mu}s temporal resolution. We show that the pulse-induced transition is driven by Joule heating, and that the pulse-induced state corresponds to nearly commensurate and incommensurate CDW phases, depending on the applied voltage amplitude. With our in operando cryo-STEM experiments, we directly correlate the CDW structure with the device resistance, and show that dislocations significantly impact device performance. This work resolves fundamental questions of resistive switching in TaS$_2$ devices critical for engineering reliable and scalable TaS$_2$ electronics.

Charge density waves are emergent quantum states that spontaneously reduce crystal symmetry, drive metal-insulator transitions, and precede superconductivity. In low-dimensions, distinct quantum states arise, however, thermal fluctuations and external disorder destroy long-range order. Here we stabilize ordered two-dimensional (2D) charge density waves through endotaxial synthesis of confined monolayers of 1T-TaS$_2$. Specifically, an ordered incommensurate charge density wave (oIC-CDW) is realized in 2D with dramatically enhanced amplitude and resistivity. By enhancing CDW order, the hexatic nature of charge density waves becomes observable. Upon heating via in-situ TEM, the CDW continuously melts in a reversible hexatic process wherein topological defects form in the charge density wave. From these results, new regimes of the CDW phase diagram for 1T-TaS$_2$ are derived and consistent with the predicted emergence of vestigial quantum order.

The layered square-planar nickelates, Nd$_{n+1}$Ni$_{n}$O$_{2n+2}$, are an appealing system to tune the electronic properties of square-planar nickelates via dimensionality; indeed, superconductivity was recently observed in Nd$_{6}$Ni$_{5}$O$_{12}$ thin films. Here, we investigate the role of epitaxial strain in the competing requirements for the synthesis of the $n=3$ Ruddlesden-Popper compound, Nd$_{4}$Ni$_{3}$O$_{10}$, and subsequent reduction to the square-planar phase, Nd$_{4}$Ni$_{3}$O$_{8}$. We synthesize our highest quality Nd$_{4}$Ni$_{3}$O$_{10}$ films under compressive strain on LaAlO$_{3}$ (001), while Nd$_{4}$Ni$_{3}$O$_{10}$ on NdGaO$_{3}$ (110) exhibits tensile strain-induced rock salt faults but retains bulk-like transport properties. A high density of extended defects forms in Nd$_{4}$Ni$_{3}$O$_{10}$ on SrTiO$_{3}$ (001). Films reduced on LaAlO$_{3}$ become insulating and form compressive strain-induced $c$-axis canting defects, while Nd$_{4}$Ni$_{3}$O$_{8}$ films on NdGaO$_{3}$ are metallic. This work provides a pathway to the synthesis of Nd$_{n+1}$Ni$_{n}$O$_{2n+2}$ thin films and sets limits on the ability to strain engineer these compounds via epitaxy.

Exploiting the emerging nanoscale periodicities in epitaxial, single-crystal thin films is an exciting direction in quantum materials science: confinement and periodic distortions induce novel properties. The structural motifs of interest are ferroelastic, ferroelectric, multiferroic, and, more recently, topologically protected magnetization and polarization textures. A critical step towards heterostructure engineering is understanding their nanoscale structure, best achieved through real-space imaging. X-ray Bragg coherent diffractive imaging visualizes sub-picometer crystalline displacements with tens of nanometers spatial resolution. Yet, it is limited to objects spatially confined in all three dimensions and requires highly coherent, laser-like x-rays. Here we lift the confinement restriction by developing real-space imaging of periodic lattice distortions: we combine an iterative phase retrieval algorithm with unsupervised machine learning to invert the diffuse scattering in conventional x-ray reciprocal-space mapping into real-space images of polar and elastic textures in thin epitaxial films. We first demonstrate our imaging in PbTiO3/SrTiO3 superlattices to be consistent with published phase-field model calculations. We then visualize strain-induced ferroelastic domains emerging during the metal-insulator transition in Ca2RuO4 thin films. Instead of homogeneously transforming into a low-temperature structure (like in bulk), the strained Mott insulator splits into nanodomains with alternating lattice constants, as confirmed by cryogenic scanning transmission electron microscopy. Our study reveals the type, size, orientation, and crystal displacement field of the nano-textures. The non-destructive imaging of textures promises to improve models for their dynamics and enable advances in quantum materials and microelectronics.

The layer stacking order in 2D materials strongly affects functional properties and holds promise for next generation electronic devices. In bulk, octahedral MoTe$_2$ possesses two stacking arrangements, the Weyl semimetal T$_d$ phase, and the higher-order topological insulator 1T' phase; however, it remains unclear if thin exfoliated flakes of MoTe$_2$ follow the T$_d$, 1T', or an alternative stacking sequence. Here, we resolve this debate using atomic-resolution imaging within the transmission electron microscope. We find that the layer stacking in thin flakes of MoTe$_2$ is highly disordered and pseudo-random, which we attribute to intrinsic confinement effects. Conversely, WTe$_2$, which is isostructural and isoelectronic to MoTe$_2$, displays ordered stacking even for thin exfoliated flakes. Our results are important for understanding the quantum properties of MoTe$_2$ devices, and suggest that thickness may be used to alter the layer stacking in other 2D materials., Comment: 6 figures, 2 tables

The discrete Fourier transform is among the most routine tools used in high-resolution scanning / transmission electron microscopy (S/TEM). However, when calculating a Fourier transform, periodic boundary conditions are imposed and sharp discontinuities between the edges of an image cause a cross patterned artifact along the reciprocal space axes. This artifact can interfere with the analysis of reciprocal lattice peaks of an atomic resolution image. Here we demonstrate that the recently developed Periodic Plus Smooth Decomposition technique provides a simple, efficient method for reliable removal of artifacts caused by edge discontinuities. In this method, edge artifacts are reduced by subtracting a smooth background that solves Poisson's equation with boundary conditions set by the image's edges. Unlike the traditional windowed Fourier transforms, Periodic Plus Smooth Decomposition maintains sharp reciprocal lattice peaks from the image's entire field of view.

This article introduces a training simulator for electron beam alignment using Ronchigrams. The interactive web application, www.ronchigram.com, is an advanced educational tool aimed at making scanning transmission electron microscopy (STEM) more accessible and open. For experienced microscopists, the tool offers on-hand quantification of simulated Ronchigrams and their resolution limits., Comment: 6 pages, 3 figures

The Ruddlesden-Popper ($A_{n+1}B_{n}\text{O}_{3n+1}$) compounds are a highly tunable class of materials whose functional properties can be dramatically impacted by their structural phase $n$. The negligible energetic differences associated with forming a sample with a single value of $n$ versus a mixture of $n$ makes the growth of these materials difficult to control and can lead to local atomic-scale structural variation arising from small stoichiometric deviations. In this work, we present a Python analysis platform to detect, measure, and quantify the presence of different $n$-phases based on atomic-resolution scanning transmission electron microscopy (STEM) images in a statistically rigorous manner. We employ phase analysis on the 002 Bragg peak to identify horizontal Ruddlesden-Popper faults which appear as regions of high positive compressive strain within the lattice image, allowing us to quantify the local structure. Our semi-automated technique offers statistical advantages by considering effects of finite projection thickness, limited fields of view, and precise sampling rates. This method retains the real-space distribution of layer variations allowing for a spatial mapping of local $n$-phases, enabling both quantification of intergrowth occurrence as well as qualitative description of their distribution, opening the door to new insights and levels of control over a range of layered materials., Comment: 8 pages, 5 figures

The rare-earth nickelates possess a diverse set of collective phenomena including metal-to-insulator transitions, magnetic phase transitions, and, upon chemical reduction, superconductivity. Here, we demonstrate epitaxial stabilization of layered nickelates in the Ruddlesden-Popper form, Nd$_{n+1}$Ni$_n$O$_{3n+1}$, using molecular beam epitaxy. By optimizing the stoichiometry of the parent perovskite NdNiO$_3$, we can reproducibly synthesize the $n = 1 - 5$ member compounds. X-ray absorption spectroscopy at the O $K$ and Ni $L$ edges indicate systematic changes in both the nickel-oxygen hybridization level and nominal nickel filling from 3$d^8$ to 3$d^7$ as we move across the series from $n = 1$ to $n = \infty$. The $n = 3 - 5$ compounds exhibit weakly hysteretic metal-to-insulator transitions with transition temperatures that depress with increasing order toward NdNiO$_3$ ($n = \infty)$., Comment: 11 pages, 4 figures with Supplemental Information

The occurrence of superconductivity in proximity to various strongly correlated phases of matter has drawn extensive focus on their normal state properties, to develop an understanding of the state from which superconductivity emerges. The recent finding of superconductivity in layered nickelates raises similar interests. However, transport measurements of doped infinite-layer nickelate thin films have been hampered by materials limitations of these metastable compounds - in particular, a relatively high density of extended defects. Here, by moving to a substrate (LaAlO$_{3}$)$_{0.3}$(Sr$_{2}$TaAlO$_{6}$)$_{0.7}$ which better stabilizes the growth and reduction conditions, we can synthesize the doping series of Nd$_{1-x}$Sr$_{x}$NiO$_{2}$ essentially free from extended defects. This enables the first examination of the 'intrinsic' temperature and doping dependent evolution of the transport properties. The normal state resistivity exhibits a low-temperature upturn in the underdoped regime, linear behavior near optimal doping, and quadratic temperature dependence for overdoping. This is strikingly similar to the copper oxides, despite key distinctions - namely the absence of an insulating parent compound, multiband electronic structure, and a Mott-Hubbard orbital alignment rather than the charge-transfer insulator of the copper oxides. These results suggest an underlying universality in the emergent electronic properties of both superconducting families.

Nickel-based superconductors provide a long-awaited experimental platform to explore possible cuprate-like superconductivity. Despite similar crystal structure and $d$ electron filling, these systems exhibit several differences. Nickelates are the most polar layered oxide superconductor, raising questions about the interface between substrate and thin film -- thus far the only sample geometry to successfully stabilize superconductivity. We conduct a detailed experimental and theoretical study of the prototypical interface between Nd$_{1-x}$Sr$_x$NiO$_2$ and SrTiO$_3$. Atomic-resolution electron energy loss spectroscopy in the scanning transmission electron microscope reveals the formation of a single intermediate Nd(Ti,Ni)O$_3$ layer. Density functional theory calculations with a Hubbard $U$ term show how the observed structure alleviates the strong polar discontinuity. We explore effects of oxygen occupancy, hole doping, and cation structure to disentangle the contributions of each for reducing interface charge density. Resolving the nontrivial interface structure will be instructive for future synthesis of nickelate films on other substrates and in vertical heterostructures.

Since the discovery of high-temperature superconductivity in the copper oxide materials, there have been sustained efforts to both understand the origins of this phase and discover new cuprate-like superconducting materials. One prime materials platform has been the rare-earth nickelates and indeed superconductivity was recently discovered in the doped compound Nd$_{0.8}$Sr$_{0.2}$NiO$_2$. Undoped NdNiO$_2$ belongs to a series of layered square-planar nickelates with chemical formula Nd$_{n+1}$Ni$_n$O$_{2n+2}$ and is known as the 'infinite-layer' ($n = \infty$) nickelate. Here, we report the synthesis of the quintuple-layer ($n = 5$) member of this series, Nd$_6$Ni$_5$O$_{12}$, in which optimal cuprate-like electron filling ($d^{8.8}$) is achieved without chemical doping. We observe a superconducting transition beginning at $\sim$13 K. Electronic structure calculations, in tandem with magnetoresistive and spectroscopic measurements, suggest that Nd$_6$Ni$_5$O$_{12}$ interpolates between cuprate-like and infinite-layer nickelate-like behavior. In engineering a distinct superconducting nickelate, we identify the square-planar nickelates as a new family of superconductors which can be tuned via both doping and dimensionality., Comment: 21 pages, 4 figures

The observation of superconductivity in infinite layer nickelate (Nd,Sr)NiO$_{2}$ thin films has led to rapid theoretical and experimental investigations of these copper-oxide-analogue systems [1-15]. Superconductivity has also been found in (Pr,Sr)NiO$_{2}$ [16,17], but not previously in (La,Sr)NiO$_{2}$ [2], raising a fundamental question whether superconductivity is associated with the presence of rare-earth moments [18,19]. Here we show that with significant materials optimization, substantial portions of the La$_{1-x}$Sr$_{x}$NiO$_{2}$ phase diagram can enter the regime of coherent low-temperature transport ($x$ = 0.14 - 0.20), with subsequent superconducting transitions and a maximum onset of ~ 9 K at $x$ = 0.20. Additionally, we observe the unexpected indication of a superconducting ground state in undoped LaNiO$_{2}$, which likely reflects the self-doped nature of the electronic structure. Combining the results of (La/Pr/Nd)$_{1-x}$Sr$_{x}$NiO$_{2}$ reveals a generalized superconducting dome, characterized by systematic shifts in the unit cell volume and in the relative electron-hole populations across the lanthanides., Comment: 23 pages, 4 figures

We measure the Shubnikov-de Haas effect in thin-film Sr$_2$RuO$_4$ grown on an (LaAlO$_3$)$_{0.29}$-(SrAl$_{1/2}$Ta$_{1/2}$O$_3$)$_{0.71}$ (LSAT) substrate. We detect all three known Fermi surfaces and extract the Fermi surface volumes, cyclotron effective masses, and quantum lifetimes. We show that the electronic structure is nearly identical to that of single-crystal Sr$_2$RuO$_4$, and that the quasiparticle lifetime is consistent with the Tc of comparably clean, single-crystal Sr$_2$RuO$_4$. Unlike single-crystal Sr$_2$RuO$_4$, where the quantum and transport lifetimes are roughly equal, we find that the transport lifetime is $1.3\pm0.1$ times longer than the quantum lifetime. This suggests that extended (rather than point) defects may be the dominant source of quasiparticle scattering in these films. To test this idea, we perform cross-sectional STEM and find that out-of-phase boundaries extending the entire thickness of the film occur with a density that is consistent with the quantum mean free path. The long quasiparticle lifetimes make these films ideal for studying the unconventional superconducting state in Sr$_2$RuO$_4$ through the fabrication of devices -- such as planar tunnel junctions and SQUIDs., Comment: 12 pages, 8 figures

Compelling evidence suggests distinct correlated electron behavior may exist only in clean 2D materials such as 1T-TaS2. Unfortunately, experiment and theory suggest that extrinsic disorder in free standing 2D layers disrupts correlation-driven quantum behavior. Here we demonstrate a route to realizing fragile 2D quantum states through endotaxial polytype engineering of van der Waals materials. The true isolation of 2D charge density waves (CDWs) between metallic layers stabilizes commensurate long-range order and lifts the coupling between neighboring CDW layers to restore mirror symmetries via interlayer CDW twinning. The twinned-commensurate charge density wave (tC-CDW) reported herein has a single metal--insulator phase transition at ~350 K as measured structurally and electronically. Fast in-situ transmission electron microscopy and scanned nanobeam diffraction map the formation of tC-CDWs. This work introduces endotaxial polytype engineering of van der Waals materials to access latent 2D ground states distinct from conventional 2D fabrication.

The recent observation of superconductivity in thin film infinite-layer nickelates$^{1-3}$ offers a different angle to investigate superconductivity in layered oxides$^{4}$. A wide range of candidate models have been proposed$^{5-10}$, emphasizing single- or multi-orbital electronic structure, Kondo or Hund's coupling, and analogies to cuprates. Clearly, further experimental characterization of the superconducting state is needed to develop a full understanding of the nickelates. Here we use magnetotransport measurements to probe the superconducting anisotropy in Nd$_{0.775}$Sr$_{0.225}$NiO$_{2}$. We find that the upper critical field is surprisingly isotropic at low temperatures despite the layered crystal structure. In a magnetic field the superconductivity is strongly Pauli-limited, such that the paramagnetic effect dominates over orbital de-pairing. Underlying this isotropic response is a substantial anisotropy in the superconducting coherence length, which is at least four times longer in-plane than out-of-plane. A prominent low-temperature upturn in the upper critical field indicates the presence of an unconventional ground state., Comment: 9 pages, 4 figures, 1 supplementary info

We demonstrate a-axis YBa2Cu3O7-x/PrBa2Cu3O7-x/YBa2Cu3O7-x trilayers grown on (100) LaAlO3 substrates with improved interface smoothness. The trilayers are synthesized by ozone-assisted molecular-beam epitaxy. The thickness of the PrBa2Cu3O7-x layer is held constant at 8 nm and the thickness of the YBa2Cu3O7-x layers is varied from 24 nm to 100 nm. X-ray diffraction measurements show all trilayers to have >95% a-axis content. The rms roughness of the thinnest trilayer is < 0.7 nm and this roughness increases with the thickness of the YBa2Cu3O7-x layers. The thickness of the YBa2Cu3O7-x layers also affects the transport properties: while all samples exhibit an onset of the superconducting transition at and above 85 K, the thinner samples show wider transition widths, {\Delta}Tc. High-resolution scanning transmission electron microscopy reveals coherent and chemically sharp interfaces, and that growth begins with a cubic (Y,Ba)CuO3-x perovskite phase that transforms into a-axis oriented YBa2Cu3O7-x as the substrate temperature is ramped up., Comment: Manuscript: 21 pages, 5 figures; supplementary materials: 12 pages, 1 table, 10 supplementary figures

The self-organization of strongly interacting electrons into superlattice structures underlies the properties of many quantum materials. How these electrons arrange within the superlattice dictates what symmetries are broken and what ground states are stabilized. Here we show that cryogenic scanning transmission electron microscopy enables direct mapping of local symmetries and order at the intra-unit-cell level in the model charge-ordered system Nd$_{1/2}$Sr$_{1/2}$MnO$_{3}$. In addition to imaging the prototypical site-centered charge order, we discover the nanoscale coexistence of an exotic intermediate state which mixes site and bond order and breaks inversion symmetry. We further show that nonlinear coupling of distinct lattice modes controls the selection between competing ground states. The results demonstrate the importance of lattice coupling for understanding and manipulating the character of electronic self-organization and highlight a novel method for probing local order in a broad range of strongly correlated systems.

Transition-metal dichalcogenides containing tellurium anions show remarkable charge-lattice modulated structures and prominent interlayer character. Using cryogenic scanning transmission electron microscopy (STEM), we map the atomic-scale structures of the high temperature (HT) and low temperature (LT) modulated phases in 1T'-TaTe$_{2}$. At HT, we directly show in-plane metal distortions which form trimerized clusters and staggered, three-layer stacking. In the LT phase at 93 K, we visualize an additional trimerization of Ta sites and subtle distortions of Te sites by extracting structural information from contrast modulations in plan-view STEM data. Coupled with density functional theory calculations and image simulations, this approach opens the door for atomic-scale visualizations of low temperature phase transitions and complex displacements in a variety of layered systems.

Spectroscopic mapping by scanning transmission electron microscopy coupled with electron energy loss spectroscopy (STEM-EELS) is a powerful technique for determining the structure and chemistry of a wide range of materials and interfaces. The extension of this technique to cryogenic temperatures opens the door to new experiments across many fields including materials physics, energy storage and conversion, and biology. Such experiments, however, often face signal limitations due to sample sensitivity or the need for rapid data acquisition under less stable cryogenic conditions. Compared to traditional indirect detection systems such as charge coupled devices (CCDs), direct electron detectors (DEDs) offer improved detective quantum efficiencies, narrower point spread functions, and superior signal-to-noise ratios. Here, we compare the performance of a Gatan K2 Summit DED to an UltraScan 1000 CCD for use in signal-limited atomic-resolution STEM-EELS experiments. Due to its improved point spread function, the DED's energy resolution remains comparable to that of the CCD at a 5 times lower dispersion, providing simultaneous access to a much broader total energy range without sacrificing spectral resolution. More importantly, the benefits of direct detection enable a variety of low-signal experiments, including atomic-resolution mapping of minor and high energy edges such as the La-M$_{2,3}$ edge at 1123 eV and the Bi-M$_{4,5}$ edge at 2580 eV. For rapid acquisitions at 400 spectra per second, elemental maps recorded with the DED show an up to 40 percent increase in atomic lattice fringe contrast compared to those acquired with the CCD. Taking advantage of these performance improvements and the fast readout of the K2 DED, we use direct detection STEM-EELS to demonstrate atomic-resolution elemental mapping at cryogenic temperatures., Comment: 6 figures

A variety of nickel oxide compounds have long been studied for their manifestation of various correlated electron phenomena. Recently, superconductivity was observed in nanoscale infinite layer nickelate thin films of Nd$_{0.8}$Sr$_{0.2}$NiO$_2$, epitaxially stabilized on SrTiO$_3$ substrates via topotactic reduction from the perovskite precursor phase. Here we present the synthesis and properties of PrNiO$_2$ thin films on SrTiO$_3$. Upon doping in Pr$_{0.8}$Sr$_{0.2}$NiO$_2$, we observe superconductivity with a transition temperature of 7-12 K, and robust critical current density at 2 K of 334 kA/cm$^2$. These findings indicate that superconductivity in the infinite layer nickelates is relatively insensitive to the details of the rare earth 4$f$ configuration. Furthermore, they motivate the exploration of a broader family of compounds based on two-dimensional NiO$_2$ planes, which will enable systematic investigation of the superconducting and normal state properties and their underlying mechanisms., Comment: 19 pages, 4 figures

Superconductivity is among the most fascinating and well-studied quantum states of matter. Despite over 100 years of research, a detailed understanding of how features of the normal-state electronic structure determine superconducting properties has remained elusive. For instance, the ability to deterministically enhance the superconducting transition temperature by design, rather than by serendipity, has been a long sought-after goal in condensed matter physics and materials science, but achieving this objective may require new tools, techniques and approaches. Here, we report the first instance of the transmutation of a normal metal into a superconductor through the application of epitaxial strain. We demonstrate that synthesizing RuO$_{2}$ thin films on (110)-oriented TiO$_{2}$ substrates enhances the density of states near the Fermi level, which stabilizes superconductivity under strain, and suggests that a promising strategy to create new transition-metal superconductors is to apply judiciously chosen anisotropic strains that redistribute carriers within the low-energy manifold of $d$ orbitals., Comment: 30 pages, 20 figures (including supplemental information)

The recent observation of superconductivity in Nd$_{0.8}$Sr$_{0.2}$NiO$_2$ has raised fundamental questions about the hierarchy of the underlying electronic structure. Calculations suggest that this system falls in the Mott-Hubbard regime, rather than the charge-transfer configuration of other nickel oxides and the superconducting cuprates. Here, we use state-of-the-art, locally-resolved electron energy loss spectroscopy to directly probe the Mott-Hubbard character of Nd$_{1-x}$Sr$_x$NiO$_2$. Upon doping, we observe emergent hybridization reminiscent of the Zhang-Rice singlet via the oxygen-projected states, modification of the Nd 5$d$ states, and the systematic evolution of Ni 3$d$ hybridization and filling. These results clearly evidence the multiband nature of this system and the distinct electronic landscape for infinite-layer nickelates despite their formal similarity to the cuprates.

We report the phase diagram of Nd$_{1-x}$Sr$_x$NiO$_2$ infinite layer thin films grown on SrTiO$_3$. A superconducting dome spanning $0.125 < x < 0.25$ is found, remarkably similar to cuprates, albeit over a narrower doping window. However, while cuprate superconductivity is bounded by an insulator for underdoping and a metal for overdoping, here we observe weakly insulating behavior on either side of the dome. Furthermore, the normal state Hall coefficient is always small and proximate to a continuous zero crossing in doping and in temperature, in contrast to the $\sim 1/x$ dependence observed for cuprates. This suggests the presence of both electron- and hole-like bands, consistent with band structure calculations., Comment: 18 pages (including Supplemental Material), 7 figures (including 4 supplemental figure)

The recent observation of superconductivity in Nd$_{0.8}$Sr$_{0.2}$NiO$_{2}$ calls for further investigation and optimization of the synthesis of this metastable infinite-layer nickelate structure. Here, we present our current understanding of important aspects of the growth of the parent perovskite compound via pulsed laser deposition on SrTiO$_{3}$ (001) substrates, and the subsequent topotactic reduction. We find that to achieve single-crystalline, single-phase superconducting Nd$_{0.8}$Sr$_{0.2}$NiO$_{2}$, it is essential that the precursor perovskite Nd$_{0.8}$Sr$_{0.2}$NiO$_{3}$ thin film is stabilized with high crystallinity and no impurity phases; in particular, a Ruddlesden-Popper-type secondary phase is often observed. We have further investigated the evolution of the soft-chemistry topotactic reduction conditions to realize full transformation to the infinite-layer structure with no film decomposition or formation of other phases. We find that capping the nickelate film with a subsequent SrTiO$_{3}$ layer provides an epitaxial template to the top region of the nickelate film, much like the substrate. Thus, for currently optimized growth conditions, we can stabilize superconducting single-phase Nd$_{0.8}$Sr$_{0.2}$NiO$_{2}$ (001) epitaxial thin films up to ~ 10 nm.

Incorporating magnetism into two dimensional (2D) van der Waals (VdW) heterostrutures is crucial for the development of functional electronic and magnetic devices. Here we show that Nb3X8 (X = Cl, Br) is a family of 2D layered trimerized kagom\'e magnets that are paramagnetic at high temperatures and undergo a first order phase transition on cooling to a singlet magnetic state. X-ray diffraction shows that a rearrangement of the VdW stacking accompanies the magnetic transition, with high and low temperature phases consistent with STEM images of the end members {\alpha}-Nb3Cl8 and \b{eta}-Nb3Br8. The temperature of this transition is systematically varied across the solid solution Nb3Cl8-xBrx (x = 0-8), with x = 6 having transitions near room temperature. The solid solution also varies the optical properties, which are further modulated by the phase transition. As such, they provide a platform on which to understand and exploit the interplay between dimensionality, magnetism, and optoelectronic behavior in VdW materials.

Magic-sized clusters (MSCs) are renowned for their identical size and closed-shell stability that inhibit conventional nanoparticle (NP) growth processes. Though MSCs have been of increasing interest, understanding the reaction pathways toward their nucleation and stabilization is an outstanding issue. In this work, we demonstrate that high concentration synthesis (1000 mM) promotes a well-defined reaction pathway to form high-purity MSCs (greater than 99.9 percent). The MSCs are resistant to typical growth and dissolution processes. Based on insights from in-situ X-ray scattering analysis, we attribute this stability to the accompanying production of a large, hexagonal organic-inorganic mesophase (greater than 100 nm grain size) that arrests growth of the MSCs and prevents NP growth. At intermediate concentrations (500 mM), the MSC mesophase forms, but is unstable, resulting in NP growth at the expense of the assemblies. These results provide an alternate explanation for the high stability of MSCs. Whereas the conventional mantra has been that the stability of MSCs derives from the precise arrangement of the inorganic structures (i.e., closed-shell atomic packing), we demonstrate that anisotropic clusters can also be stabilized by self-forming fibrous mesophase assemblies. At lower concentration (less than 200 mM or greater than 16 acid-to-metal), MSCs are further destabilized and NPs formation dominates that of MSCs. Overall, the high concentration approach intensifies and showcases inherent concentration-dependent surfactant phase behavior that is not accessible in conventional (i.e., dilute) conditions. This work provides not only a robust method to synthesize, stabilize, and study identical MSC products, but also uncovers an underappreciated stabilizing interaction between surfactants and clusters., Comment: main text - 24 pages, 8 figures. SI - 35 pages, 30 figures, 6 tables

Single-crystal materials with sufficiently low crystal symmetry and strong spin-orbit interactions can be used to generate novel forms of spin-orbit torques on adjacent ferromagnets, such as the out-of-plane antidamping torque previously observed in WTe$_2$/ferromagnet heterostructures. Here, we present measurements of spin-orbit torques produced by the low-symmetry material $\beta$-MoTe$_2$, which unlike WTe$_2$ retains bulk inversion symmetry. We measure spin-orbit torques on $\beta$-MoTe$_2$/Permalloy heterostructures using spin-torque ferromagnetic resonance as a function of crystallographic alignment and MoTe$_2$ thickness down to the monolayer limit. We observe an out-of-plane antidamping torque with a spin torque conductivity as strong as 1/3 of that of WTe$_2$, demonstrating that the breaking of bulk inversion symmetry in the spin-generation material is not a necessary requirement for producing an out-of-plane antidamping torque. We also measure an unexpected dependence on the thickness of the $\beta$-MoTe$_2$ -- the out-of-plane antidamping torque is present in MoTe$_2$/Permalloy heterostructures when the $\beta$-MoTe$_2$ is a monolayer or trilayer thick, but goes to zero for devices with bilayer $\beta$-MoTe$_2$.

We report measurements of current-induced torques in heterostructures of Permalloy (Py) with TaTe$_2$, a transition-metal dichalcogenide (TMD) material possessing low crystal symmetry, and observe a torque component with Dresselhaus symmetry. We suggest that the dominant mechanism for this Dresselhaus component is not a spin-orbit torque, but rather the Oersted field arising from a component of current that flows perpendicular to the applied voltage due to resistance anisotropy within the TaTe$_2$. This type of transverse current is not present in wires made from a single uniform layer of a material with resistance anisotropy, but will result whenever a material with resistance anisotropy is integrated into a heterostructure with materials having different resistivities, thereby producing a spatially non-uniform pattern of current flow. This effect will therefore influence measurements in a wide variety of heterostructures incorporating 2D TMD materials and other materials with low crystal symmetries.

Dielectric capacitors hold a tremendous advantage for energy storage due to their fast charge/discharge times and stability in comparison to batteries and supercapacitors. A key limitation to today's dielectric capacitors, however, is the low storage capacity of conventional dielectric materials. To mitigate this issue, antiferroelectric materials have been proposed, but relatively few families of antiferroelectric materials have been identified to date. Here, we propose a new design strategy for the construction of lead-free antiferroelectric materials using interfacial electrostatic engineering. We begin with a ferroelectric material with one of the highest known bulk polarizations, BiFeO3. We show that by confining atomically-precise thin layers of BiFeO3 in a dielectric matrix that we can induce a metastable antiferroelectric structure. Application of an electric field reversibly switches between this new phase and a ferroelectric state, in addition, tuning of the dielectric layer causes coexistence of the ferroelectric and antiferroelectric states. Precise engineering of the structure generates an antiferroelectric phase with energy storage comparable to that of the best lead-based materials. The use of electrostatic confinement provides a new pathway for the design of engineered antiferroelectric materials with large and potentially coupled responses., Comment: 17 pages, 4 figures