Search

While myofibroblasts are the key cause of abnormal extracellular matrix accumulation, the origin of which has not yet been fully elucidated. Recently, it has been found that macrophage-myofibroblast transformation (MMT) defined by the expression of both macrophage markers (F4/80 or CD68) and myofibroblast markers (α-SMA) is one of its important sources. In the process of MMT, it is unclear whether epor is involved. In this study, when BMDM was induced by tgf-β1, the number of F4/80 + α-SMA + cells increased, the cells polarized toward M2, and the expression of tgf-β1 increased. After the activation of epor, the number of F4/80 +α-SMA + cells and the polarization level of M2 were further increased. At the same time, we found that the conditioned medium from MMT cells could induce the activation of 3T3 cells with increased the expression of α-SMA and col-1. In contrast, the number of F4/80+α-SMA + cells, the polarization of M2, and the expression of Tgf-β1 decreased after epor was inhibited by siRNA. Our results demonstrate that the activation of epor in BMDMs could promote the transformation of macrophage-myofibroblast induced by TGF-β1., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Pathological conditions such as oxidative stress or inflammation may alter the homeostasis of adventitia triggering vascular wall remodeling and abnormal angiogenesis, what can lead to development of atherosclerosis. Growth differentiation factor-15 (GDF-15) is a stress-responsive cytokine and metabolic regulator, but its role in angiogenesis is not yet fully defined. Here we utilized an organ-on-a-chip technology to analyze endothelial sprouting in an adventitia-resembling microenvironment. We analyzed angiogenic responses to growth factor gradient across the extracellular matrix-resembling fibrin gel and in cell co-culture in response to GDF-15-treated adventitial fibroblasts. We observed that GDF-15 enhanced the pro-angiogenic effect of vascular endothelial growth factor. On the other hand, GDF-15-treated adventitial fibroblasts decreased endothelial sprouting. GDF-15 seems to indirectly affect endothelial cells and, depending on the microenvironment, its effect can be either pro- or anti-angiogenic., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Cortical formins, pivotal for the assembly of linear actin filaments beneath the membrane, exert only minor effects on unconfined cell migration of weakly and moderately adherent cells. However, their impact on migration and mechanostability of highly adherent cells remains poorly understood. Here, we demonstrate that loss of cortical actin filaments generated by the formins mDia1 and mDia3 drastically compromises cell migration and mechanics in highly adherent fibroblasts. Biophysical analysis of the mechanical properties of the mutant cells revealed a markedly softened cell cortex in the poorly adherent state. Unexpectedly, in the highly adherent state, associated with a hyperstretched morphology with exaggerated focal adhesions and prominent high-strain stress fibers, they exhibited even higher cortical tension compared to control. Notably, misguidance of intracellular forces, frequently accompanied by stress-fiber rupture, culminated in the formation of tension- and contractility-induced macroapertures, which was instantly followed by excessive lamellipodial protrusion at the periphery, providing critical insights into mechanotransduction of mechanically stressed and highly adherent cells.

Bioprinted hydrogels are extensively studied to provide an artificial matrix for 3D cell culture. The success of bioprinting hydrogels relies on fine-tuning their rheology and composition to achieve shear-thinning behavior. However, a challenge arises from the limited viscoelastic and stiffness range accessible from a single hydrogel formulation. Nevertheless, hydrogel mechanical properties are recognized as essential cues influencing cell phenotype, migration, and differentiation. Thus, it is crucial to develop a system to easily modulate bioprinted hydrogels' mechanical behaviors. In this work, we modulated the viscoelastic properties and stiffness of bioprinted hydrogels composed of fibrinogen, alginate, and gelatin by tuning the crosslinking bath solution. Various concentrations of calcium ionically crosslinked alginate, while transglutaminase crosslinked gelatin. Subsequently, we characterized the mechanical behavior of our bioprinted hydrogels from the nanoscale to the macroscale. This approach enabled the production of diverse bioprinted constructs, either with similar elastic behavior but different elastic moduli or with similar elastic moduli but different viscoelastic behavior from the same hydrogel formulation. Culturing fibroblasts in the hydrogels for 33 days revealed a preference for cell growth and matrix secretion in the viscoelastic hydrogels. This work demonstrates the suitability of the method to decouple the effects of material mechanical from biochemical composition cues on 3D cultured cells., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

An important objective of researchers is to develop a perfect wound dressing that can effectively treat different kinds of wounds. Natural substances with beneficial qualities, such as plant extracts and biopolymers are an ideal aid for wound care. Hydrogels based on biopolymers offer a lot of promising applications for topical use and are biocompatible, hydrophilic and non-toxic. When employed alone or in conjunction with other active agents, herbal extracts have a great deal of use in the healing of wounds. This study comprises Ruellia tuberosa extract loaded with carboxymethyl cellulose and guar gum hydrogels that have potential anti-bacterial, antioxidant, anti-inflammatory and hemocompatibility. Using mouse fibroblast cells (L929), the MTT (3- (4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) test was conducted to assess the biocompatibility. Furthermore, the scratch wound assay using the L929 fibroblast cell line of mouse was employed to assess the in vitro wound healing potential of the synthesised composite hydrogels., Competing Interests: Declaration of competing interest The authors declare no conflicts of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Background Aims: With the continuous development and advancement of human pluripotent stem cell (PSC)-derived cell therapies, an ever-increasing number of clinical indications can benefit from their application. Due to the capacity for PSCs to form teratomas, safety testing is required to ensure the absence of residual PSCs in a cell product. To mitigate these limitations, in vitro analytical methods can be utilized as quality control after the production of a PSC-derived cell product. Sensitivity of these analytic methods is critical in accurately quantifying residual PSC in the final cell product. In this study, we compared the sensitivity of three in vitro assays: qPCR, ddPCR and RT-LAMP., Methods: The spike-in samples were produced from three independent experiments, each spiked with different PSC lines (PSC1, NH50191, and WA09 referred to as H9) into a background of primary fibroblasts (Hs68). These samples were then subjected to qPCR, ddPCR and RT-LAMP to determine their detection limit in measuring a commonly used PSC marker, LIN28A., Results: The results indicated that the three analytic methods all exhibited consistent results across different cell-line spiked samples, with ddPCR demonstrating the highest sensitivity of the three methods. The LIN28A ddPCR assay could confidently detect 10 residual PSCs in a million fibroblasts., Discussion: In our hand, ddPCR LIN28A assay demonstrated the highest sensitivity for detection of residual PSCs compared to the other two assays. Correlating such in vitro safety results with corresponding in vivo studies demonstrating the tumorigenicity profile of PSC-derived cell therapy could accelerate the safe clinical translation of cell therapy., Competing Interests: Declaration of competing interest The authors have no commercial, proprietary, or financial interest in the products or companies described in this article., (Copyright © 2024 International Society for Cell & Gene Therapy. Published by Elsevier Inc. All rights reserved.)

Eying the increasing impact of hyaluronic acid (HA) and its multifaceted applications, this study employs a non-toxic, one-pot strategy to develop injectable, self-healing hydrogels for biomedical applications. Phytic acid (PA), a plant-derived organic acid with high biocompatibility and numerous hydroxyl groups, can act as a cross-linking agent to form hydrogen-bonded networks with the HA chains. The study examined the optimal mass ratio of HA to PA to achieve superior hydrogel performance. Fourier transform infrared spectroscopy, rheological studies, and thermal analysis confirmed the successful formation of the hydrogels, which exhibited injectability, rapid self-healing, malleability, and elasticity. The investigation of different compositions revealed a sensitive influence of PA on the self-assembly phenomena of HA during flow. SEM cross-section images of the freeze-dried gels revealed a porous surface in the form of an interconnected network of microchannels. In addition, the hydrogel exhibits good tissue adhesion properties and promotes cell proliferation in biocompatibility tests on human gingival fibroblasts. The significance of this study lies in the ability of the proposed materials to be injected, to conform to the complex 3D structure of host tissues as well as their ability to recover after damage, indicating significant potential as scaffolds for wound healing., Competing Interests: Declaration of competing interest All authors have participated in (a) conception and design, or analysis and interpretation of the data; (b) drafting the article or revising it critically for important intellectual content; and (c) approval of the final version. This manuscript has not been submitted to, nor is under review at, another journal or other publishing venue. The authors have no affiliation with any organization with a direct or indirect financial interest in the subject matter discussed in the manuscript., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Scaffolds with multiphasic structures are considered to be superior for guided tissue regeneration. Two types of tilapia skin collagen gradient membranes (stepped gradient and linear gradient) with multiphasic structures were prepared by controlling the collagen concentrations and the freezing rates. The results revealed that collagen gradient membranes were more capable of guiding tissue regeneration compared to homogeneous membranes. These two gradient membranes featured a dense outer layer and a loose inner layer, with good mechanical properties as indicated by tensile strengths of more than 250 Kpa and porosities exceeding 85 %. Additionally, these membranes also showed good hydrophilicity and water absorption, with an inner layer contact angle of less than 91° and a water absorption ratio greater than 40 times. Furthermore, the multiphasic scaffolds were proved to be biocompatible by the acute toxicity assay, the intradermal irritation test and so on. Gradient membranes could effectively promote the adhesion and proliferation of fibroblasts and osteoblasts, through elevating the TGF-β/Smad signaling pathway by TGF-β and Smads, and activating the Wnt/β-catenin signaling pathway by LRP5 and β-catenin, similar to homogenous membranes. Therefore, collagen gradient membranes from tilapia skin show important application value in guiding tissue regeneration., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Cardiomyocytes are terminal differentiated cells and have limited ability to proliferate or regenerate. Condition like myocardial infarction causes massive death of cardiomyocytes and is the leading cause of death. Previous studies have demonstrated that cardiac fibroblasts can be induced to transdifferentiate into cardiomyocytes in vitro and in vivo by forced expression of cardiac transcription factors and microRNAs. Our previous study have demonstrated that full chemical cocktails could also induce fibroblast to cardiomyocyte transdifferentiation both in vitro and in vivo. With the development of tissue clearing techniques, it is possible to visualize the reprogramming at the whole-organ level. In this study, we investigated the effect of the chemical cocktail CRFVPTM in inducing in situ fibroblast to cardiomyocyte transdifferentiation with two strains of genetic tracing mice, and the reprogramming was observed at whole-heart level with CUBIC tissue clearing technique and 3D imaging. In addition, single-cell RNA sequencing (scRNA-seq) confirmed the generation of cardiomyocytes from cardiac fibroblasts which carries the tracing marker. Our study confirms the use of small molecule cocktails in inducing in situ fibroblast to cardiomyocyte reprogramming at the whole-heart level and proof-of-conceptly providing a new source of naturally incorporated cardiomyocytes to help heart regeneration., (© 2024. The Author(s), under exclusive licence to Shanghai Institute of Materia Medica, Chinese Academy of Sciences and Chinese Pharmacological Society.)

In clinical practice to treat complex injuries, the application of electrical stimulation (ES) directly to the skin complicates the wound. In this work, the effect of a conductive hydrogel mediated electric field on skin regeneration is investigated. Polypyrrole incorporated matrices of gelatin and silk fibroin were prepared by two-step interfacial polymerization. The maximum electrical conductivity of 10 -4 S cm -1 was achieved when 200 mM polypyrrole was loaded. Mechanically stable and cytocompatible hydrogels were evidenced to have antioxidant and blood compatible characteristics. Human dermal fibroblast cells responded to pulsed stimulation of 100 or 300 mV mm -1 as observed from the increased expressions of TGFβ1, αSMA, and COLIAI genes. Further, the increase in the αSMA protein expression with the magnitude of electrical stimulation also suggested transdifferentiation of the fibroblast to myofibroblast. Moreover, Raman spectroscopy identified two fingerprint regions (collagen and lipid) to differentiate ES treated and nontreated samples. Therefore, the combination of hydrogels and electrical stimulation has potential therapeutic effects for accelerating the rate of skin regeneration.

This study was conducted to analyze the viability of primary chicken embryo fibroblasts and the efficiency of adipogenic trans-differentiation for cultured meat production. In isolating chicken embryo fibroblasts (CEFs) from a heterogeneous cell pool containing chicken satellite cells (CSCs), over 90% of CEFs expressed CD29 and vimentin. The analysis of the proliferative capabilities of CEFs revealed no significant differences in EdU-positive cells (%), cumulative cell number, doubling time, and growth rate from passage 1 to passage 9 ( p > 0.05). This indicates that CEFs can be isolated by 2 h of pre-plating and survive stably up to passage 9, and that primary fibroblasts can serve as a valuable cell source for the cultured meat industry. Adipogenic trans-differentiation was induced up to passage 9 of CEFs. As passages increased, lipid accumulation and adipocyte size significantly decreased ( p < 0.05). The reduced differentiation rate of primary CEFs with increasing passages poses a major challenge to the cost and efficiency of cultured meat production. Thus, effective cell management and the maintenance of cellular characteristics for a long time are crucial for ensuring stable and efficient cultured fat production in the cultured meat industry.

A comprehensive understanding of intercellular and cell-matrix interactions is essential for advancing our knowledge of cell biology. Existing techniques, such as fluorescence microscopy and electron microscopy, face limitations in resolution and sample preparation. Supravital lanthanoid staining provides new opportunities for detailed visualization of cellular metabolism and intercellular interactions. This study aims to describe the structure, elemental chemical, and probable origin of zones of extreme lanthanoid (neodymium) accumulation that form during preparation for scanning electron microscopy (SEM) analysis in corneal fibroblasts filopodia. The results identified three morphological patterns of neodymium staining in fibroblast filopodia, each exhibiting asymmetric staining within a thin, sharp, and extremely bright barrier zone, located perpendicular to the filopodia axis. Semi-quantitative chemical analyses showed neodymium-labeled non-linear phosphorus distribution within filopodia, potentially indicating varying phosphate anion concentrations and extreme phosphate accumulation at a physical or physicochemical barrier. Phosphorus zones labeled with neodymium did not correspond to mitochondrial clusters. During apoptosis, the number of filopodia with extreme and asymmetric phosphorus accumulation increases. Supravital lanthanoid staining coupled with SEM allows detailed visualization of intercellular and cell-matrix interactions with high contrast and resolution. These results enhance our understanding of phosphate anion accumulation and transfer mechanisms in cells under normal conditions and during apoptosis.

Background: Lack of insight into factors that determine purity and quality of human iPSC (hiPSC)-derived neo-cartilage precludes applications of this powerful technology toward regenerative solutions in the clinical setting. Here, we set out to generate methylome-wide landscapes of hiPSC-derived neo-cartilages from different tissues-of-origin and integrated transcriptome-wide data to identify dissimilarities in set points of methylation with associated transcription and the respective pathways in which these genes act., Methods: We applied in vitro chondrogenesis using hiPSCs generated from two different tissue sources: skin fibroblasts and articular cartilage. Upon differentiation toward chondrocytes, these are referred to as hFiCs and hCiC, respectively. Genome-wide DNA methylation and RNA sequencing datasets were generated of the hiPSC-derived neo-cartilages, and the epigenetically regulated transcriptome was compared to that of neo-cartilage deposited by human primary articular cartilage (hPAC)., Results: Methylome-wide landscapes of neo-cartilages of hiPSCs reprogrammed from two different somatic tissues were 85% similar to that of hPACs. By integration of transcriptome-wide data, differences in transcriptionally active CpGs between hCiC relative to hPAC were prioritized. Among the CpG-gene pairs lower expressed in hCiCs relative to hPACs, we identified genes such as MGP, GDF5, and CHAD enriched in closely related pathways and involved in cartilage development that likely mark phenotypic differences in chondrocyte states. Vice versa, among the CpG-gene pairs higher expressed, we identified genes such as KIF1A or NKX2-2 enriched in neurogenic pathways and likely reflecting off target differentiation., Conclusions: We did not find significant variation between the neo-cartilages derived from hiPSCs of different tissue sources, suggesting that application of a robust differentiation protocol such as we applied here is more important as compared to the epigenetic memory of the cells of origin. Results of our study could be further exploited to improve quality, purity, and maturity of hiPSC-derived neo-cartilage matrix, ultimately to realize introduction of sustainable, hiPSC-derived neo-cartilage implantation into clinical practice., (© 2024. The Author(s).)

Nanocellulose- and alginate-based hydrogels have been suggested as potential wound-healing materials, but their utilization is limited by the Food and Drug Administration (FDA) requirements regarding endotoxin levels. Cytotoxicity and the presence of endotoxin were assessed after gel sterilization using an autoclave and UV treatment. A new fingerprinting method was developed to characterize the compounds detected in cellulose nanocrystal (CNC)- and cellulose-nanofiber (CNF)-based hydrogels using both positive- and negative-ion mode electrospray ionization Fourier transform ion cyclotron resonance mass spectroscopy (ESI FT-ICR MS). These biobased hydrogels were used as scaffolds for the cultivation and growth of human dermal fibroblasts to test their biocompatibility. A resazurin-based assay was preferred over all other biocompatibility methodologies since it allowed for the evaluation of viability over time in the same sample without causing cell lysis. The CNF dispersion of 6 EU mL -1 was slightly above the limits, and it did not affect the cell viability, whereas CNC hydrogels induced a reduction of metabolic activity by the fibroblasts. The chemical structure of the detected endotoxins did not contain phosphates, but it encompassed hydrophobic sulfonate groups, requiring the development of new high-pressure sterilization methods for the use of cellulose hydrogels in medicine.

Overexpression of cardiac reprogramming factors, including GATA4, HAND2, TBX5, and MEF2C (GHT/M), can directly reprogram cardiac fibroblasts (CFs) into induced cardiomyocytes (iCMs). Adeno-associated virus (AAV) vectors are widely used clinically, and vectors targeting cardiomyocytes (CMs) have been extensively studied. However, safe and efficient AAV vectors targeting CFs for in vivo cardiac reprogramming remain elusive. Therefore, we screened multiple AAV capsids and promoters to develop efficient and safe CF-targeting AAV vectors for in vivo cardiac reprogramming. AAV-DJ capsids containing periostin promoter (AAV-DJ-Postn) strongly and specifically expressed transgenes in resident CFs in mice after myocardial infarction (MI). Lineage tracing revealed that AAV-DJ-Postn vectors expressing GHT/M reprogrammed CFs into iCMs, which was further increased 2-fold using activated MEF2C via the fusion of the powerful MYOD transactivation domain (M-TAD) with GHT (AAV-DJ-Postn-GHT/M-TAD). AAV-DJ-Postn-GHT/M-TAD injection improved cardiac function and reduced fibrosis after MI. Overall, we developed new AAV vectors that target CFs for cardiac reprogramming., Competing Interests: Declaration of interests M. Ieda holds a patent related to this work, U.S. Patent 9,517,250, entitled ‘‘Methods for Generating Cardiomyocytes,” issued on October 19, 2012., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

The abnormal proliferation and differentiation of oral mucosal fibroblasts (FBs) is the key to the progression of oral submucosal fibrosis. To clarify the mechanism of platelet-derived growth factor (PDGF-BB)-induced FBs fibrosis in oral mucosa, real-time quantitative polymerase chain reaction and Western blot were used in this study to detect the expression of miR-503 and the expression of p-MEK, p-ERK, miR-503, RAF, smooth actin and type I collagen under different time and concentration stimulation of PDGF-BB. The effects of overexpression of miR-503 or RAF on the proliferation and migration of FBs were detected by cell counting kit 8 and cell scratch assay, respectively. A dual luciferase reporter gene assay was used to verify the targeting effect of miR-503 on RAF. The results showed that miR-503 was downregulated in a dose- and time-dependent manner in PDGF-BB-induced FBs. In addition, RAF is a direct target of miR-503 and can be negatively regulated. Overexpression of RAF can promote FB proliferation, migration, differentiation, collagen synthesis, and activation of downstream molecules (MEK/ERK), while overexpression of miR-503 can partially reverse the effects of RAF. Therefore, miR-503 regulates the biological behavior of PDGF-BB-induced oral mucosal FBs by influencing the activation of the RAS/RAF/MEK/ERK signaling pathway.

The skin is an essential organ that protects the body from external aggressions; therefore, damage from various wounds can significantly impair its function, and effective methods for regenerating and restoring its barrier function are crucial. This study aimed to mass-produce wound-healing exosomes using a fragment of the fibroblast growth factor 2 (FGF2)-derived peptide (FP2) to enhance cell proliferation and exosome production. Our experiments demonstrated increased cell proliferation when Wharton's jelly mesenchymal stem cells (WJ MSCs) were coated with FP2. Exosomes from FP2-coated WJ MSCs were analyzed using nanoparticle-tracking analysis, transmission electron microscopy, and Western blotting. Subsequently, fibroblasts were treated with these exosomes, and their viability and migration effects were compared. Anti-inflammatory effects were also evaluated by inducing pro-inflammatory factors in RAW264.7 cells. The treatment of fibroblasts with FP2-coated WJ MSC-derived exosomes (FP2-exo) increased the expression of FGF2, confirming their wound-healing effect in vivo. Overall, the results of this study highlight the significant impact of FP2 on the proliferation of WJ MSCs and the anti-inflammatory and wound-healing effects of exosomes, suggesting potential applications beyond wound healing.

The extracellular matrix (ECM) plays a crucial role in maintaining cell morphology and facilitating intercellular signal transmission within the human body. ECM has been extensively utilized for tissue injury repair. However, the consideration of factor gradients during ECM preparation has been limited. In this study, we developed a novel approach to generate sheet-like ECM with a continuous gradient of stromal cell-derived factor-1 (SDF1 α ). Briefly, we constructed fibroblasts to overexpress SDF1 α fused with the collagen-binding domain (CBD-SDF1 α ), and cultured these cells on a slanted plate to establish a gradual density cell layer at the bottom surface. Subsequently, excess parental fibroblasts were evenly distributed on the plate laid flat to fill the room between cells. Following two weeks of culture, the monolayer cells were lyophilized to form a uniform ECM sheet possessing a continuous gradient of SDF1 α . This engineered ECM material demonstrated its ability to guide oriented migration of human umbilical cord mesenchymal stem cells on the ECM sheet. Our simple yet effective method holds great potential for advancing research in regenerative medicine., (© 2024 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.)

Significance: The polarimetric properties of biological tissues are often difficult to ascertain independent of their complex structural and organizational features. Conventional polarimetric tissue phantoms have well-characterized optical properties but are overly simplified. We demonstrate that an innovative, biologically sourced, engineered tissue construct better recapitulates the desired structural and polarimetric properties of native collagenous tissues, with the added benefit of potential tunability of the polarimetric response. We bridge the gap between non-biological polarimetric phantoms and native tissues., Aim: We aim to evaluate a synthesized tissue construct for its effectiveness as a phantom that mimics the polarimetric properties in typical collagenous tissues., Approach: We use a fibroblast-derived, ring-shaped engineered tissue construct as an innovative tissue phantom for polarimetric imaging. We perform polarimetry measurements and subsequent analysis using the Mueller matrix decomposition and Mueller matrix transformation methods. Scalar polarimetric parameters of the engineered tissue are analyzed at different time points for both a control group and for those treated with the transforming growth factor ( TGF ) - β 1 . Second-harmonic generation (SHG) imaging and three-dimensional collagen fiber organization analysis are also applied., Results: We identify linear retardance and circular depolarization as the parameters that are most sensitive to the tissue culture time and the addition of TGF - β 1 . Aside from a statistically significant increase over time, the behavior of linear retardance and circular depolarization indicates that the addition of TGF - β 1 accelerates the growth of the engineered tissue, which is consistent with expectations. We also find through SHG images that collagen fiber organization becomes more aligned over time but is not susceptible to the addition of TGF - β 1 ., Conclusions: The engineered tissue construct exhibits changes in polarimetric properties, especially linear retardance and circular depolarization, over culture time and under TGF - β 1 treatments. This tissue construct has the potential to act as a controlled modular optical phantom for polarimetric-based methods., (© 2024 The Authors.)

SLMAP3 is a constituent of the centrosome and is known to assemble with the striatin-interacting phosphatase and kinase (STRIPAK) complex, where it has been reported to repress Hippo signalling. The global knockout of SLMAP3 in mice results in embryonic/perinatal lethality and stunted growth without changes in the phosphorylation status of YAP. Diverse phenotypes present in the SLMAP3 -/- embryos include reduced body axis, small and abnormal organs resembling defects in planar cell polarity (PCP) signalling, while also displaying the notable polycystic kidneys, a known manifestation of ciliopathies. Analysis of cell polarity in primary mouse embryonic fibroblasts (MEFs) including cell migration, orientation and mitotic spindle angle did not reveal any changes due to SLMAP3 loss in these cells, although the expression of DVL3 was significantly reduced. Furthermore, MEFs lacking FGFR1OP2 or STRN3, two other STRIPAK members, did not reveal any significant changes in any of these parameters either. Significant changes in the number of ciliated cells and primary cilium length in SLMAP3 and FGFR1OP2 deficient MEFs were evident, while a reduced primary cilium length was notable in chondrocytes of SLMAP3 deficient embryos. Our findings suggest that SLMAP3 is essential for mouse embryogenesis through novel mechanisms involving the primary cilium/PCP and protein stability independent of Hippo signalling.

Additive manufacturing can develop regenerative scaffolds for wound healing. 3D printing offers meticulous porosity, mechanical integrity, cell adhesion and cost-effectiveness. Herein, we prepared ink composed of carboxymethyl cellulose (CMC), polyvinylpyrrolidone (PVP), collagen, and oregano extract for the fabrication of tissue constructs. The blend was optimized to form a homogeneous ink and rheological characterization demonstrated shear thinning behavior. The scaffolds were printed using Direct Ink Write (DIW) at a flow speed of 4 mm 3 /s and a layer height of 0.18 mm. The fabricated scaffolds demonstrated an ultimate tensile strength (UTS) and toughness of 730 KPa and 2.72 MJ/m 3 , respectively. Scanning Electron Microscopy (SEM) revealed an average pore size of 300 ± 30 μm. Fourier transform infrared spectroscopy (FTIR) analysis confirmed that all materials were present. The contact angle of the composite scaffold was 68° ± 1°. Moreover, the scaffolds presented 82 % mass loss (degradation) in phosphate buffer saline (PBS) over 14 days. The composite scaffold exhibited inhibition zones of 9 mm and 12 mm against Staphylococcus aureus and Escherichia coli, respectively. The PVP/CMC/collagen/oregano 3D printed scaffolds exhibited excellent biocompatibility with the mesenchymal stem cells and humman dermal fibroblast cells, confirmed by water-soluble tetrazolium - 8 (WST-8) assay (test conducted for 7 days). The enhanced angiogenic potential of said scaffold was assesed by release of vascular endothelial growth factor followed by further validation through in-vivo CAM assay. Thus, confirming suitability for the potential wound healing application., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Androgenic alopecia (AGA) typically manifests post-puberty, resulting in decreases in hair density, disruptions in the hair growth cycle, and alterations in hair follicle micro structure. Dihydrotestosterone (DHT) is a key hormone implicated in hair loss, especially on male. In this study, we found that each of arginine (Arg), arterial extract (AE) or biotin tripeptide-1 (BT-1), when combined with low level light therapy (LLLT, at 630 nm, 2 J/cm 2 ), showed the efficacy in enhancing mitochondrial functions, cell proliferation and collagen synthesis in fibroblasts. Additionally, CARRIPOWER (the complexes of AE, BT-1, Arg, and Diaminopyrimidine derivatives), in conjunction with LLLT (630 nm, 2 J/cm 2 ), showed promising results in dermal papilla cells (DPCs). The promising results contained not also inflammatory cytokines (IL-1β and IL-6) and cell pro apoptotic factor (TGF-β2) reduction, but also Wnt pathway inhibition by decreasing DKK1 level, and pro-hair growth factors (vascular endothelial growth factor (VEGF) and β-catenin) increase. This innovative combination therapy offers a potential solution for the treatment of AGA, addressing both hormonal and cellular factors involved in hair loss., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

There is an unmet need for in vitro cancer models that emulate the complexity of human tissues. 3D-printed solid tumor micromodels based on decellularized extracellular matrices (dECMs) recreate the biomolecule-rich matrix of native tissue. Herein a 3D in vitro metastatic melanoma model that is amenable for drug screening purposes and recapitulates features of both the tumor and the skin microenvironment is described. Epidermal, basement membrane, and dermal biocompatible inks are prepared by means of combined chemical, mechanical, and enzymatic processes. Bioink printability is confirmed by rheological assessment and bioprinting, and bioinks are subsequently combined with melanoma cells and dermal fibroblasts to build complex 3D melanoma models. Cells are tracked by confocal microscopy and surface-enhanced Raman spectroscopy (SERS) mapping. Printed dECMs and cell tracking allow modeling of the initial steps of metastatic disease, and may be used to better understand melanoma cell behavior and response to drugs., (© 2024 The Author(s). Advanced Healthcare Materials published by Wiley‐VCH GmbH.)

Enhancing endothelial cell growth on small-diameter vascular grafts produced from decellularized tissues or synthetic substrates is pivotal for preventing thrombosis. While optimized decellularization protocols can preserve the structure and many components of the extracellular matrix (ECM), the process can still lead to the loss of crucial basement membrane proteins, such as laminin, collagen IV, and perlecan, which are pivotal for endothelial cell adherence and functional growth. This loss can result in poor endothelialization and endothelial cell activation causing thrombosis and intimal hyperplasia. To address this, the basement membrane's ECM is emulated on fiber substrates, providing a more physiological environment for endothelial cells. Thus, fibroblasts are cultured on fiber substrates to produce an ECM membrane substrate (EMMS) with basement membrane proteins. The EMMS then underwent antigen removal (AR) treatment to eliminate antigens from the membrane while preserving essential proteins and producing an AR-treated membrane substrate (AMS). Subsequently, human endothelial cells cultured on the AMS exhibited superior proliferation, nitric oxide production, and increased expression of endothelial markers of quiescence/homeostasis, along with autophagy and antithrombotic factors, compared to those on the decellularized aortic tissue. This strategy showed the potential of pre-endowing fiber substrates with a basement membrane to enable better endothelization., (© 2024 Wiley‐VCH GmbH.)

Kinases are known to have kinase activity independent functions. To gain further insights into potential kinase-independent functions of SLK/STK2, we have developed a kinase-dead allele, SLK K63R using in vivo CRISPR/Cas technology. Our studies show that blastocysts homozygote for SLK K63R do not develop into viable mice. However, heterozygotes are viable and fertile with no overt phenotypes. Analyses of mouse embryonic fibroblasts show that expression of SLK K63R results in a 50% decrease in kinase activity in heterozygotes. In contrast to previous studies, our data show that SLK does not form homodimers and that the kinase defective allele does not act in a dominant negative fashion. Expression of SLK K63R leads to altered Rac1 and RhoA activity, increased stress fiber formation and delayed focal adhesion turnover. Our data support a previously observed role for SLK in cell migration and suggest that at least 50% kinase activity is sufficient for embryonic development., Competing Interests: Declaration of competing interest None., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Large skin wounds, with extensive surface area and deep vertical full-thickness involvement, can pose significant challenges in clinical settings. Traditional routes for repairing skin wounds encompass three hallmarks: 1) scab formation for hemostasis; 2) proliferation and migration of epidermal cells for wound closure; 3) proliferation, migration, and functionalization of fibroblasts and endothelial cells for dermal remodeling. However, this route face remarkable challenges to healing large wounds, usually leading to disordered structures and loss of functions in the regenerated skin, due to limited control on the transition among the three stages. In this work, an implantable bioelectronics is developed that enables the synchronization of the three stages, offering accelerated and high-quality healing of large skin wounds. The system efficiently electro-transfect local cells near the wounds, forcing cellular proliferation, while providing a 3D porous environments for synchronized migration of epidermal and dermal cells. In vivo experiments demonstrated that the system achieved synchronous progression of multiple layers within the wounds, leading to the reconstruction of a complete skin structure similar to healthy skin, which presents a new avenue for the clinical translation of large wound healing., (© 2024 Wiley‐VCH GmbH.)

In this study, a novel array electrospinning collector was devised to generate two distinct regenerated silk fibroin (SF) fibrous membranes: ordered and disordered. Leveraging electrostatic forces during the electrospinning process allowed precise control over the orientation of SF fiber, resulting in the creation of membranes comprising both aligned and randomly arranged fiber layers. This innovative approach resulted in the development of large-area membranes featuring exceptional stability due to their alternating patterned structure, achievable through expansion using the collector, and improving the aligned fiber membrane mechanical properties. The study delved into exploring the potential of these membranes in augmenting wound healing efficiency. Conducting in vitro toxicity assays with adipose tissue-derived mesenchymal stem cells (AD-MSCs) and normal human dermal fibroblasts (NHDFs) confirmed the biocompatibility of the SF membranes. We use dual perspectives on exploring the effects of different conditioned mediums produced by cells and structural cues of materials on NHDFs migration. The nanofibers providing the microenvironment can directly guide NHDFs migration and also affect the AD-MSCs and NHDFs paracrine effects, which can improve the chemotaxis of NHDFs migration. The ordered membrane, in particular, exhibited pronounced effectiveness in guiding directional cell migration. This research underscores the revelation that customizable microenvironments facilitated by SF membranes optimize the paracrine products of mesenchymal stem cells and offer valuable physical cues, presenting novel prospects for enhancing wound healing efficiency., (© 2024 The Author(s). Biotechnology and Bioengineering published by Wiley Periodicals LLC.)

The multibiocomponent hybrid alginate hydrogels based on brown and sea algae, containing 100 % ingredients of natural origin were prepared by ionic crosslinking reaction of a polymeric matrix with lipid nanodispersion. To the best of the Authors' knowledge such multicomponent biobased hydrogel of promising medical and cosmetical applications for the first time was obtained in the environment of flower water, received earlier as a waste by-product from various chemical processes. An innovative hybrid alginate hydrogel that is completely biodegradable and eco-friendly was obtained following waterless and upcycling trends that are in line with the principles of sustainable development. The optimal composition of the lipid nanodispersion and the polymeric matrix was selected using the statistical method of design of the experiment. Based on obtained results, multibiocomponent hybrid alginate hydrogels with various ratios of lipid nanodispersion were obtained. Subsequently, the porous structure and elasticity of the hybrid hydrogels were analyzed. Moreover, to confirm the safety of the multibiocomponent alginate hybrid hydrogels the cytotoxic tests were carried out using human fibroblasts and keratinocytes cell lines. As the final product hybrid of hydrolate-swollen alginate hydrogel and lipid nanodispersion containing several active ingredients (silymarin, bakuchiol, spirulina) was obtained., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Engineering cardiac implants for treating myocardial infarction (MI) has advanced, but challenges persist in mimicking the structural properties and variability of cardiac tissues using traditional bioconstructs and conventional engineering methods. This study introduces a synthetic patch with a bioactive surface designed to swiftly restore functionality to the damaged myocardium. The patch combines a composite, soft, and conductive hydrogel-based on (3,4-ethylenedioxythiophene):polystyrene-sulfonate (PEDOT:PSS) and polyvinyl alcohol (PVA). This cardiac patch exhibits a reasonably high electrical conductivity (40 S/cm) and a stretchability up to 50% of its original length. Our findings reveal its resilience to 10% cyclic stretching at 1 Hz with no loss of conductivity over time. To mediate a strong cell-scaffold adhesion, we biofunctionalize the hydrogel with a N-cadherin mimic peptide, providing the cardiac patch with a bioactive surface. This modification promote increased adherence and proliferation of cardiac fibroblasts (CFbs) while effectively mitigating the formation of bacterial biofilm, particularly against Staphylococcus aureus, a common pathogen responsible for surgical site infections (SSIs). Our study demonstrates the successful development of a structurally validated cardiac patch possessing the desired mechanical, electrical, and biofunctional attributes for effective cardiac recovery. Consequently, this research holds significant promise in alleviating the burden imposed by myocardial infarctions., (© 2024 The Authors. Journal of Biomedical Materials Research Part A published by Wiley Periodicals LLC.)

This study aimed to enhance the properties of polyvinylpyrrolidone (PVP) for use as biocompatible facial masks. To achieve this, nanofibers were developed by blending PVP with cellulose nanofibers (CNFs) and Aloe vera (AV) powder using electrospinning. The results showed that incorporating CNFs and AV into the PVP matrix led to the formation of smooth and uniform nanofibers. In particular, adding 3-6 wt% AV powder in PVP/CNF composites improved fiber diameter distribution and uniformity compared to pure PVP. The PVP/CNF/AV nanofibers exhibited desirable properties for facial mask applications. They displayed 86-93 % porosity, which allowed for efficient moisture absorption capacity of up to 1829 %, and excellent water vapor permeability rate of 3.92 g/m 2 h. The mechanical properties of the electrospun nanofiber composites were evaluated through tensile testing. The results showed that Young's modulus values decreased progressively with the addition of CNFs and AV powder to the PVP polymer matrix, indicating a plasticizing effect that enhances flexibility. The fracture strain remained similar across all composites, suggesting that CNFs and AV did not significantly weaken the PVP matrix. The tensile strength initially increased with CNF addition but decreased with incremental AV loading. Biocompatibility studies revealed that all nanofibers exhibited excellent fibroblast viability, surpassing 98 %. This indicates that incorporating CNFs and AV did not compromise cell viability, further highlighting the suitability of the PVP/CNF/AV composites for facial mask applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Generating stable and customizable topography on hydrogel surfaces with contact guidance potential is critical as it can direct/influence cell growth. This necessitates the development of new techniques for surface patterning of the hydrogels. We report on the design of a square grid template for surface patterning hydrogels. The template was 3-D printed and has the diameter of a well in a 24-well plate. Hyaluronic acid methacrylate (HA) hydrogel precursor solutions were cast on the 3D printed template's surface, which generated 3D square shape topographies on the HA hydrogel surface upon demolding. The 3D Laser Microscopy has shown the formation of a periodic array of 3D topographies on hydrogel surfaces. 3D Laser and Electron Microscopy Imaging have revealed that this new method has increased the surface area and exposed the underlying pore structure of the HA hydrogels. To demonstrate the method's versatility, we have successfully applied this technique to generate 3D topography on two more acrylate hydrogel formulations, gelatin Methacrylate and polyethylene glycol dimethacrylate. Human neonatal dermal fibroblast cells were used as a model cell line to evaluate the cell guidance potential of patterned HA hydrogel. Confocal fluorescence microscopy imaging has revealed that the 3D surface topographies on HA hydrogels can guide and align the actin filaments of the fibroblasts presumably due to the contact guidance mechanism. The newly developed methodology of 3D topography generation in acrylate hydrogels may influence the cell responses on hydrogel surfaces which can impact biomedical applications such as tissue engineering, wound healing, and disease modeling., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Objective: to evaluate a membrane based on type B gelatin (G) and porcine urinary bladder extracellular matrix (PUB-EM), highlighting the potential effect of the combination evaluated by biocompatibility and regulation of the expression of transcription factors involved in tissue regeneration. G-PUB-EM membranes were prepared at 12.5, 25, and 50% w/v, and evaluated for biocompatibility with Fibroblast. Chemical characterization by FTIR-ATR showed complex spectra during crosslinking process with glutaraldehyde. Physical tests were performed in deionized water and PBS for 48 h. A significant increase in swelling was observed during the first 2 h. Biocompatibility testing (MTS) and evaluation of the expression profile of genes involved in the cell cycle (Cyclin-D1 VEGF, TNF and NF-κ-B) by PCR showed an increase in viability in a PUB-EM content-dependent way, except for 50% PUB-EM membrane which showed cytotoxic effects with a decrease in cell viability below 70%. The membranes showed an increase in the expression of some factors of cell cycle, as well as inflammatory processes that could promote tissue repair. 12.5 and 25% gelatin type B/porcine urinary bladder extracellular matrix (G/PUB-EM) based membranes have potential for tissue regeneration applications., Impact Statement: The use of membranes based on type B gelatin and porcine urinary bladder for tissue engineering represents a novel strategy. Biocompatibility and signaling pathways play a primary role in tissue repair and wound recovery. Transcription factors that mediate signaling, cell division and vascularization are part of molecules that intervene in the regenerative potential of cells. These techniques will have a significant impact on tissue repair and regeneration and thus stop depending on tissue donors or other surgical sites from the same patient, as is the case with burn patients., Competing Interests: Declaration of conflicting interestsThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

This study presents an innovative bi-layered three-dimensional skin-like nanopad (SLN) engineered for skin tissue regeneration. The SLN integrates a mechanically supportive polycaprolactone nanofibrous layer with a functional chitosan hydrogel film, mimicking natural skin. Our SLN exhibits superior flexibility, with a maximum elongation of 751.71 ± 125 % and exceptional porosity of 95 ± 4.5 %, ensuring effective exudate management due to its high water uptake capacity (4393 ± 72 %). FTIR analysis confirmed a distinctive fiber-hydrogel network within the SLN, which serves as a barrier against Staphylococcus aureus and Pseudomonas aeruginosa infiltration. In vitro cell viability assays with the human fibroblast have consistently demonstrated that 3D bi-layered SLN enhances fibroblast attachment, infiltration, and proliferation by 150 ± 20 %. In vivo studies in a rat model demonstrated significantly faster wound closure, with 60 % on day 7 and 87 % on day 10, compared to the 30 % and 60 % in controls, highlighting the efficacy of SLN. By mimicking the architecture of native skin, this biomimetic bi-layered SLN scaffold provides flexibility and support while accelerating in vivo wound closure by promoting fibroblast proliferation and infiltration. Customizable in size, depth, and shape, the engineered SLN has emerged as a promising platform for advanced wound care and tissue engineering., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Folding of mucosal tissues, such as the tissue within the epithelium of the upper respiratory airways, is critical for organ function. Studying the influence of folded tissue patterns on cellular function is challenging mainly due to the lack of suitable cell culture platforms that can recreate dynamic tissue folding in vitro. Here, a bilayer hydrogel folding system, composed of alginate/polyacrylamide double-network (DN) and hyaluronic acid (HA) hydrogels, to generate static folding patterns based on mechanical instabilities, is described. By encapsulating human fibroblasts into patterned HA hydrogels, human bronchial epithelial cells form a folded pseudostratified monolayer. Using magnetic microparticles, DN hydrogels reversibly fold into pre-defined patterns and enable programmable on-demand folding of cell-laden hydrogel systems upon applying a magnetic field. This hydrogel construction provides a dynamic culture system for mimicking tissue folding in vitro, which is extendable to other cell types and organ systems., (© 2023 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

Genetic backgrounds influence cellular phenotypes, drug responses, and health outcomes, yet most human iPSC lines are derived from individuals of European descent, with lines from indigenous Africans particularly scarce. Addressing this gap, we generated iPSCs from dermal fibroblasts of a healthy 60-year-old indigenous Nigerian male of the Babur ethnic group using Sendai virus. The iPSC line displayed a normal karyotype, was characterized for pluripotency markers and differentiated into neural progenitor cells and astrocytes. To enhance African representation in research, this iPSC line will be available to the scientific community, with ongoing efforts focused on creating an open-access African iPSC biobank. Resource Table., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Wound healing is a complex biological process involving close crosstalk between various cell types. Dysregulation in any of these processes, such as in diabetic wounds, results in chronic nonhealing wounds. Fibroblasts are a critical cell type involved in the formation of granulation tissue, essential for effective wound healing. 315 different polymer surfaces are screened to identify candidates which actively drive fibroblasts toward either pro- or antiproliferative functional phenotypes. Fibroblast-instructive chemistries are identified, which are synthesized into surfactants to fabricate easy to administer microparticles for direct application to diabetic wounds. The pro-proliferative microfluidic derived particles are able to successfully promote neovascularization, granulation tissue formation, and wound closure after a single application to the wound bed. These active novel bio-instructive microparticles show great potential as a route to reducing the burden of chronic wounds., (© 2022 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

Background: In vitro culture of fibroblasts is a technique based on cell isolation, physiological characterization, and cryopreservation. This technique has not been described for Galea spixii, therefore, it can be used to learn about its cellular biology and genetic diversity., Objective: We established fibroblast lines of six G. spixii individuals from several passages (second, fifth, eighth, and tenth) and cryopreserved them., Methods: Fibroblasts recovered from skin biopsies were identified based on morphology, immunocytochemistry, and karyotyping. The cells were analyzed for morphology, ultrastructure, viability, proliferation, metabolism, oxidative stress, bioenergetic potential, and apoptosis before and after cryopreservation., Results: After the eighth passage, the fibroblasts showed morphological and karyotypic changes, although their viability, metabolism, and proliferation did not change. An increase in oxidative stress and bioenergetic potential from the fifth to the eighth passages were also observed. Post cryopreservation, cell damage with respect to the ultrastructure, viability, proliferative rate, apoptotic levels, oxidative stress, and bioenergetic potential were verified., Conclusion: Fibroblasts up to the tenth passage could be cultured in vitro. However, cells at the fifth passage were of better quality to be used for reproductive techniques. Additionally, optimization of the cryopreservation protocol is essential to improve the physiological parameters of these cells., Competing Interests: Declaration of Competing Interest The authors declare having no conflict of interest., (Copyright © 2024 Elsevier GmbH. All rights reserved.)

This study presents an innovative method for producing thermosensitive bioink from chitosan hydrogels saturated with carbon dioxide and agarose. It focuses on a detailed characterisation of their physicochemical properties and potential applications in biomedicine and tissue engineering. The ORO test approved the rapid regeneration of the three-dimensional structure of chitosan-agarose composites in a unidirectional bench press simulation test. The diffusion of dyes through the chitosan-agarose hydrogel membranes strongly depended on the share of both polymers in the composite and the molecular weight of the dyes. Glucose, as a nutrient marker, also diffused through all membranes regardless of composition. Biocompatibility assessment using MTT tests on 46BR.1N fibroblasts and HaCaT keratinocytes confirmed the safety of the bioink. The regenerative potential of the bioink was confirmed by efficient cell migration, especially HaCaT. Long-term viability studies showed that chitosan-agarose scaffolds, unlike the agarose ones, support cell proliferation and survival, especially 14 days after bioink extrusion. Experiments in a skin wound model in mice confirmed the biocompatibility of the tested dressing and the beneficial action of chitosan on healing. Studies on vessel formation in chicken embryos highlight the potential of the chitosan-agarose composition to enhance proangiogenic effects. This composition meets all entry criteria and possesses excellent biological properties.

Background: Cryopreservation is a crucial procedure for safeguarding cells or other biological constructs, showcasing considerable potential for applications in tissue engineering and regenerative medicine., Aims: This study aimed to evaluate the effectiveness of different cryopreservation conditions on human cells viability., Methods: A set of cryopreserved data from Department of Tissue Engineering and Regenerative Medicine (DTERM) cell bank were analyse for cells attachment after 24 h being revived. The revived cells were analysed based on different cryopreservation conditions which includes cell types (skin keratinocytes and fibroblasts, respiratory epithelial, bone marrow mesenchymal stem cell (MSC); cryo mediums (FBS + 10% DMSO; commercial medium); storage durations (0 to > 24 months) and locations (tank 1-2; box 1-5), and revival methods (direct; indirect methods). Human dermal fibroblasts (HDF) were then cultured, cryopreserved in different cryo mediums (HPL + 10% DMSO; FBS + 10% DMSO; Cryostor) and stored for 1 and 3 months. The HDFs were revived using either direct or indirect method and cell number, viability and protein expression analysis were compared., Results: In the analysis cell cryopreserved data; fibroblast cells; FBS + 10% DMSO cryo medium; storage duration of 0-6 months; direct cell revival; storage in vapor phase of cryo tank; had the highest number of vials with optimal cell attachment after 24 h revived. HDFs cryopreserved in FBS + 10% DMSO for 1 and 3 months with both revival methods, showed optimal live cell numbers and viability above 80%, higher than other cryo medium groups. Morphologically, the fibroblasts were able to retain their phenotype with positive expression of Ki67 and Col-1. HDFs cryopreserved in FBS + 10% DMSO at 3 months showed significantly higher expression of Ki67 (97.3% ± 4.62) with the indirect revival method, while Col-1 expression (100%) was significantly higher at both 1 and 3 months compared to other groups., Conclusion: In conclusion, fibroblasts were able to retain their characteristics after various cryopreservation conditions with a slight decrease in viability that may be due to the thermal-cycling effect. However, further investigation on the longer cryopreservation periods should be conducted for other types of cells and cryo mediums to achieve optimal cryopreservation outcomes., (© 2024. The Author(s).)

Placental-derived products have been used since the early 1900s for wound applications and have shown clinical utility in supporting wound healing. A hypothermically stored amniotic membrane (HSAM) was developed using a proprietary process to allow for the retention of the extracellular matrix (ECM), viable cells, and key proteins. To evaluate its utility, we characterized the HSAM and compared it to a native unprocessed amniotic membrane (uAM) and a dehydrated amniotic membrane (dAM), as well as assessing the functionality of the HSAM as a scaffold to promote cell growth. The HSAM, uAM, and dAM were compared using scanning electron microscopy (SEM), histology, and thickness. Scaffold durability was assessed in vitro using mechanical testing and a simulated wound fluid (SWF) model. The ability of the HSAM to act as a scaffold was evaluated using an in vitro attachment model. The HSAM showed similar structural characteristics compared to the uAM; however, the dAM was significantly more compact. There were no significant differences between the HSAM and the uAM following degradation in an SWF model. ECM- and placental-related proteins were shared between the HSAM and uAM, and the HSAM enhanced the attachment and proliferation of fibroblasts in vitro. The HSAM is substantially similar to the uAM by retaining key regulatory proteins, resisting degradation in SWF, and acting as a scaffold for cellular growth and invasion.

Most breast implants currently used in both reconstructive and cosmetic surgery have a silicone outer shell, which, despite much progress, remains susceptible to mechanical failure, infection, and foreign body response. This study shows that the durability and biocompatibility of breast implant-grade silicone can be enhanced by incorporating carbon nanomaterials of sp 2 and sp 3 hybridization into the polymer matrix and onto its surface. Plasma treatment of the implant surface can be used to modify platelet adhesion and activation to prevent thrombosis, postoperative infection, and inflammation disorders. The addition of 0.8% graphene flakes resulted in an increase in mechanical strength by 64% and rupture strength by around 77% when compared to pure silicone, whereas when nanodiamond (ND) was used as the additive, the mechanical strength was increased by 19.4% and rupture strength by 37.5%. Composites with a partially embedded surface layer of either graphene or ND showed superior antimicrobial activity and biocompatibility compared to pure silicone. All composite materials were able to sustain the attachment and growth of human dermal fibroblast, with the preferred growth noted on ND-coated surfaces when compared to graphene-coated surfaces. Exposure of these materials to hydrogen plasma for 5, 10, and 20 s led to substantially reduced platelet attachment on the surfaces. Hydrogen-treated pure silicone showed a decrease in platelet attachment for samples treated for 5-20 s, whereas silicone composite showed an almost threefold decrease in platelet attachment for the same plasma treatment times. The absence of platelet activation on the surface of composite materials suggests a significant improvement in hemocompatibility of the material.

Low molecular weight gels are formed via the self-assembly of small molecules into fibrous structures. In the case of hydrogels, these networks entrap large volumes of water, yielding soft materials. Such gels tend to have weak mechanical properties and a high permeability for cells, making them particularly appealing for regenerative medicine applications. Ureido-pyrimidinone (UPy) supramolecular gelators are self-assembling systems that have demonstrated excellent capabilities as biomaterials. Here, we combine UPy-gelators with another low molecular weight gelator, the functionalized dipeptide 2NapFF. We have successfully characterized these multicomponent systems on a molecular and bulk scale. The addition of 2NapFF to a crosslinked UPy hydrogel significantly increased hydrogel stiffness from 30 Pa to 1300 Pa. Small-angle X-ray scattering was used to probe the underlying structures of the systems and showed that the mixed UPy and 2NapFF systems resemble the scattering data produced by the pristine UPy systems. However, when a bifunctional UPy-crosslinker was added, the scattering was close to that of the 2NapFF only samples. The results suggest that the crosslinker significantly influences the assembly of the low molecular weight gelators. Finally, we analysed the biocompatibility of the systems using fibroblast cells and found that the cells tended to spread more effectively when the crosslinking species was incorporated. Our results emphasise the need for thorough characterisation at multiple length scales to finely control material properties, which is particularly important for developing novel biomaterials.

We at Cell Reports speak with Mingxing Lei about his journey in science and his recent paper in which he and his fellow authors identified a mechanical-chemical signaling cascade that mediates the interaction between dendritic cells and fibroblasts and regulates basal epidermal cell proliferation., Competing Interests: Declaration of interests The author declares no competing interests., (Copyright © 2024.)

Background: Fibroblast cells have the ability to improve skin conditions through regenerative medicine and cell-based therapies. The purpose of this scoping review is to assess the contribution of fibroblast cells to skin homeostasis and extracellular matrix deposition in clinical trials involving skin disorders and cosmetic applications., Methods: Using targeted search terms, published publications from January 2000 to August 2023 that addressed fibroblast uses in clinical trials of skin conditions were obtained from bibliographic databases like PubMed, Scopus, and Web of Science (WoS). Precise inclusion and exclusion criteria were used during the screening process. The potential benefits of induction treatment with fibroblasts lead to the choosing of clinical trials for this kind of treatment., Results: Out of the 820 published ppapers initially identified, only 35 studies fulfilled our meticulous eligibility criteria after careful screening. To ensure clarity, we methodically eliminated any duplicate or irrelevant published papers, thereby offering a transparent account of our selection process., Conclusion: This study highlights the advantages of fibroblast therapy in treating skin conditions such as diabetic foot, venous leg ulcers, and cosmetic reasons. Fibroblasts possess remarkable regenerating capabilities, making dermal fibroblast therapy crucial in cell-based and skin regenerative treatments. Nevertheless, additional research is required for more disorders and cosmetic applications., (© 2024. The Author(s).)

The giant panda ( Ailuropoda melanoleuca ) stands as a flagship and umbrella species, symbolizing global biodiversity. While traditional assisted reproductive technology faces constraints in safeguarding the genetic diversity of giant pandas, induced pluripotent stem cells (iPSCs) known for their capacity to differentiate into diverse cells types, including germ cells, present a transformative potential for conservation of endangered animals. In this study, primary fibroblast cells were isolated from the giant panda, and giant panda iPSCs (GPiPSCs) were generated using a non-integrating episomal vector reprogramming method. Characterization of these GPiPSCs revealed their state of primed pluripotency and demonstrated their potential for differentiation. Furthermore, we innovatively formulated a species-specific chemically defined FACL medium and unraveled the intricate signaling pathway networks responsible for maintaining the pluripotency and fostering cell proliferation of GPiPSCs. This study provides key insights into rare species iPSCs, offering materials for panda characteristics research and laying the groundwork for in vitro giant panda gamete generation, potentially aiding endangered species conservation.

Ectopic expression of lineage-specific transcription factors (TFs) of another cell type can induce cell fate reprogramming. However, the heterogeneity of reprogramming cells has been a challenge for data interpretation and model evaluation. Here, we present a protocol to characterize cells expressing defined factors during direct cell reprogramming using a factor-indexing approach based on single-nuclei multiome sequencing (FI-snMultiome-seq). We describe the steps for barcoding TFs, converting human fibroblasts to pancreatic ductal-like cells using defined TFs, and preparing library for FI-snMultiome-seq analysis. For complete details on the use and execution of this protocol, please refer to Fei et al. 1 ., Competing Interests: Declaration of interests The authors declare no competing interests., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Background: Fetal calf serum (FCS), an existing cell culture supplement, is effective but has several drawbacks, including being expensive, requiring a lengthy process of production, and requiring a hard currency. With this in mind, we planned to evaluate chick embryo extract and egg yolk extracts in cell culture as alternatives to fetal calf serum (FCS)., Methods: Specific pathogen-free eggs were purchased from the National Veterinary Institute, Bishoftu, Ethiopia, and incubated in a humidified incubator at 37 °C for 11 days. Egg yolk extract (EYE) and chick embryo extract (CEE) were collected after the egg was opened with caution not to destroy the yolk sack or the chick embryo itself. Chick fibroblasts and Vero cells were cultured in minimum essential medium (MEM) supplemented with egg yolk extract or chick embryo extract at ratios of 0:10, 1:9, 2.5:7.5, and 5:5% fetal calf serum., Results: Fibroblast cell attachment was better in media supplemented with 5% CEE and 5% FCS. The confluency was also greater than 50% at this concentration. Vero cells cultured with 5% CEE and 5% FCS also exhibited very good cell attachment and a confluency of up to 70%. Viability and confluency were also observed at 5%:5% ratios of 50 and 70%, respectively., Conclusion: This investigation evaluated these two extracts as cell culture supplements and revealed promising results as alternatives to fetal calf serum. The limitation of this study is that it only used two cell types and additional cell lines, and different ratios should be tested. With the above findings, further research using different cell lines, ratios and conditions is warranted., (© 2024. The Author(s).)

Absolute quantity imaging of biomolecules on a single cell level is critical for measurement assurance in biosciences and bioindustries. While infrared (IR) transmission microscopy is a powerful label-free imaging modality capable of chemical quantification, its applicability to hydrated biological samples remains challenging due to the strong IR absorption by water. Traditional IR imaging of hydrated cells relies on powerful light sources, such as synchrotrons, to mitigate the light absorption by water. However, we overcome this challenge by applying a solvent absorption compensation (SAC) technique to a home-built benchtop IR microscope based on an external-cavity quantum cascade laser. SAC-IR microscopy adjusts the incident light using a pair of polarizers to precompensate the IR absorption by water while retaining the full dynamic range. Integrating the IR absorbance over a cell yields the total mass of biomolecules per cell. We monitor the total mass of the biomolecules of live fibroblast cells over 12 h, demonstrating promise for advancing our understanding of the biomolecular processes occurring in live cells on the single-cell level.

Background/Objectives: Induced pluripotent stem cells (iPSCs) reprogrammed from somatic cells into cells with most of the ESC (embryonic stem cell) characteristics show promise toward solving ethical problems currently facing stem cell research and eventually yield clinical grade pluripotent stem cells for therapies and regenerative medicine. In recent years, an increasing body of research suggests that the chemical induction of pluripotency (CIP) method can yield iPSCs in vitro, yet its application in avian species remains unreported. Methods: Herein, we successfully obtained stably growing chicken embryonic fibroblasts (CEFs) using the tissue block adherence method and employed 12 small-molecule compounds to induce chicken iPSC formation. Results: The final optimized iPSC induction system was bFGF (10 ng/mL), CHIR99021 (3 μM), RepSox (5 μM), DZNep (0.05 μM), BrdU (10 μM), BMP4 (10 ng/mL), vitamin C (50 μg/mL), EPZ-5676 (5 μM), and VPA (0.1 mM). Optimization of the induction system revealed that the highest number of clones was induced with 8 × 10 4 cells per well and at 1.5 times the original concentration. Upon characterization, these clones exhibited iPSC characteristics, leading to the development of a stable compound combination for iPSC generation in chickens. Concurrently, employing a deletion strategy to investigate the functionality of small-molecule compounds during induction, we identified CHIR99021 and BrdU as critical factors for inducing chicken iPSC formation. Conclusions: In conclusion, this study provides a reference method for utilizing small-molecule combinations in avian species to reprogram cells and establish a network of cell fate determination mechanisms.

Background: Macrophage-based cell therapy is promising in solid tumors, but the efficient acquisition of macrophages remains a challenge. Induced pluripotent stem cell (iPSC)-induced macrophages are a valuable source, but time-consuming and costly. The application of reprogramming technologies allows for the generation of macrophages from somatic cells, thereby facilitating the advancement of cell-based therapies for numerous malignant diseases., Methods: The composition of CD45 + myeloid-like cell complex (MCC) and induced macrophage (iMac) were analyzed by flow cytometry and single-cell RNA sequencing. The engraftment capacity of CD45 + MCC was evaluated by two transplantation assays. Regulation of c-Myc on MafB was evaluated by ChIP-qPCR and promoter reporter and dual luciferase assays. The phenotype and phagocytosis of iMac were explored by flow cytometry and immunofluorescence. Leukemia, breast cancer, and patient-derived tumor xenograft models were used to explore the anti-tumor function of iMac., Results: Here we report on the establishment of a novel methodology allowing for reprogramming fibroblasts into functional macrophages with phagocytic activity by c-Myc overexpression. Fibroblasts with ectopic expression of c-Myc in iPSC medium rapidly generated CD45 + MCC intermediates with engraftment capacity as well as the repopulation of distinct hematopoietic compartments. MCC intermediates were stably maintained in iPSC medium and continuously generated functional and highly pure iMac just by M-CSF cytokine stimulation. Single-cell transcriptomic analysis of MCC intermediates revealed that c-Myc up-regulated the expression of MafB, a major regulator of macrophage differentiation, to promote macrophage differentiation. Characterization of the iMac activity showed NF-κB signaling activation and a pro-inflammatory phenotype. iMac cells displayed significantly increased in vivo persistence and inhibition of tumor progression in leukemia, breast cancer, and patient-derived tumor xenograft models., Conclusions: Our findings demonstrate that c-Myc alone is enough to reprogram fibroblasts into functional macrophages, supporting that c-Myc reprogramming strategy of fibroblasts can help circumvent long-standing obstacles to gaining "off-the-shelf" macrophages for anti-cancer immunotherapy., (© 2024. The Author(s).)