Search

Recent results showed that the ferrimagnetic compensation point and other characteristic features of Tb/Co ferrimagnetic multilayers can be tailored by He+ ion bombardment. With appropriate choices of the He+ ion dose, we prepared two types of lattices composed of squares with either Tb or Co domination. The magnetization reversal of the first lattice is similar to that seen in ferromagnetic heterostructures consisting of areas with different switching fields. However, in the second lattice, the creation of domains without accompanying domain walls is possible. These domain patterns are particularly stable because they simultaneously lower the demagnetizing energy and the energy associated with the presence of domain walls (exchange and anisotropy). For both lattices, studies of magnetization reversal show that this process takes place by the propagation of the domain walls. If they are not present at the onset, the reversal starts from the nucleation of reversed domains and it is followed by domain wall propagation. The magnetization reversal process does not depend significantly on the relative sign of the effective magnetization in areas separated by domain walls.

Single and double paramagnetic colloidal particles are placed above a magnetic square pattern and are driven with an external magnetic field processing around a high symmetry direction of the pattern. The external magnetic field and that of the pattern confine the colloids into lanes parallel to a lattice vector of the pattern. The precession of the external field causes traveling minima of the magnetic potential along the direction of the lanes. At sufficiently high frequencies of modulation, only the doublets respond to the external field and move in direction of the traveling minima along the lanes, while the single colloids cannot follow and remain static. We show how the doublets can induce a coordinated motion of the single colloids building colloidal trains made of a chain of several single colloids transported by doublets.

We used scanning tunneling microscopy (STM) to study the Cu-induced restructuring of Si(100)-(2 × 1) surface at the atomic scale. Copper was deposited onto silicon substrates kept at room temperature (RT) or 500 °C. Submonolayer amounts of Cu were found to be sufficient to induce a visible restructuring of the Si(100)-(2 × 1) surface manifested by the disappearance of the vacancy line defects (VLDs), as well as dimer rows disordering (for the RT deposition) or the formation of a c(4 × 4) surface reconstruction (for the 500 °C deposition) not reported for the Cu/Si(100) system so far. Higher amounts of Cu deposited onto the RT-disordered surface at 500 °C led to the formation of 3D CuSi crystallites, accompanied by a significant surface roughening. In contrast, deposition of large amounts of Cu onto a pristine Si(100) at 500 °C resulted in the formation of a near-(1 × 1) local surface atoms ordering.

We have measured magnetic damping in polycrystalline Co25Fe75 films adjacent to various nonmagnetic materials (Ti, Cu, Au, NiO) serving as buffer and/or cover layers. It was shown that it is crucial to use a proper buffer layer to achieve low damping in the Co25Fe75 layer. We found that even an ultrathin Cu buffer layer is sufficient to reduce the total damping when inserted between the substrate and the Co25Fe75 layer. The damping measured in the in-plane configuration reduces almost threefold (to α t o t

Edge currents of paramagnetic colloidal particles propagate at the edge between two topologically equivalent magnetic lattices of different lattice constant when the system is driven with periodic modulation loops of an external magnetic field. The number of topologically protected particle edge transport modes is not determined by a bulk-boundary correspondence. Instead, we find a rich variety of edge transport modes that depend on the symmetry of both the edge and the modulation loop. The edge transport can be ratchet-like or adiabatic, time or non-time reversal symmetric. The topological nature of the edge transport is classified by a set of winding numbers around bulk fence points extended by winding numbers around edge specific bifurcation points that cannot be deduced from the two bulk lattices.

In this work, we study magnetization switching induced by spin-orbit torque in $\mathrm{W}$ ($\mathrm{Pt}$)/$\mathrm{Co}$/$\mathrm{Ni}\mathrm{O}$ heterostructures with variable thickness of $\mathrm{W}$ and $\mathrm{Pt}$ heavy-metal layers, a perpendicularly magnetized $\mathrm{Co}$ layer, and an antiferromagnetic $\mathrm{Ni}\mathrm{O}$ layer. Using current-driven switching and magnetoresistance and anomalous-Hall-effect measurements, we determine the perpendicular and in-plane exchange-bias field. Several Hall-bar devices possessing in-plane exchange bias from both systems are selected and analyzed in relation to our analytical switching model of the critical current density as a function of $\mathrm{Pt}$ and $\mathrm{W}$ thickness, resulting in estimation of the effective spin Hall angle and perpendicular effective magnetic anisotropy. We demonstrate in both the $\mathrm{Pt}$/$\mathrm{Co}$/$\mathrm{Ni}\mathrm{O}$ system and the $\mathrm{W}$/$\mathrm{Co}$/$\mathrm{Ni}\mathrm{O}$ system deterministic $\mathrm{Co}$ magnetization switching without an external magnetic field, which is replaced by an in-plane exchange-bias field. Moreover, we show that due to a higher effective spin Hall angle in the $\mathrm{W}$-based system than in the $\mathrm{Pt}$-based system, the relative difference between the resistance states in the magnetization current switching to the difference between the resistance states in magnetic field switching determined by the anomalous Hall effect ($\mathrm{\ensuremath{\Delta}}R/\mathrm{\ensuremath{\Delta}}{R}_{\mathrm{AHE}}$) is about twice as high in $\mathrm{W}$-based devices than in $\mathrm{Pt}$-based devices, while the critical switching-current density in $\mathrm{W}$-based devices is 1 order lower than in $\mathrm{Pt}$-based devices. The current-switching stability and the training process are discussed in detail.

Paramagnetic colloidal spheres assemble to colloidal bipeds of various length in an external magnetic field. When the bipeds reside above a magnetic pattern and we modulate the direction of the external magnetic field, the rods perform topologically distinct classes of protected motion above the pattern. The topological protection allows each class to be robust against small continuous deformations of the driving loop of the external field. We observe motion of the rod from a passive central sliding and rolling motion for short bipeds toward a walking motion with both ends of the rod alternately touching down on the pattern for long bipeds. The change of character of the motion occurs in form of discrete topological transitions. The topological protection makes walking a form of motion robust against the breaking of the non symmorphic symmetry. In patterns with non symmorphic symmetry walking is reversible. In symmorphic patterns lacking a glide plane the walking can be irreversible or reversible involving or not involving ratchet jumps. Using different gauges allows us to unravel the active and passive aspects of the topological walks.

Deposition of alloy films with a well-controlled concentration gradient obtained by co-sputtering from two magnetron sources is studied experimentally and compared with numerical calculations. This method was used together with a linearly moving shutter to fabricate sperimagnetic Co-Tb alloy films with mutually orthogonal concentration and thickness gradients. Using magnetooptical measurements it was demonstrated that, for thicknesses below 10 nm, the compensation concentration (ccomp) shifts towards higher Tb content as the thickness of the Co-Tb film is reduced. Results for Co-Tb alloy films are compared with those for (Tb/Co)RN multilayers with various repetition numbers (RN). For both sample types, the ccomp decreases in a similar way with increasing total film thickness. Thus, the decrease of ccomp with increasing total thickness (either of alloy films or of multilayers) can be considered a universal behavior.

We present experimental data and their theoretical description on spin Hall magnetoresistance (SMR) in bilayers consisting of a heavy metal (H) coupled to in-plane magnetized ferromagnetic metal (F), and determine contributions to the magnetoresistance due to SMR and anisotropic magnetoresistance (AMR) in five different bilayer systems: $$\hbox {W}/\text {Co}_{20}\text {Fe}_{60}\text {B}_{20}$$W/Co20Fe60B20, $$\text {Co}_{20}\text {Fe}_{60}\text {B}_{20}/\hbox {Pt}$$Co20Fe60B20/Pt, $$\hbox {Au}/\text {Co}_{20}\text {Fe}_{60}\text {B}_{20}$$Au/Co20Fe60B20, W/Co, and Co/Pt. The devices used for experiments have different interfacial properties due to either amorphous or crystalline structures of constitutent layers. To determine magnetoresistance contributions and to allow for optimization, the AMR is explicitly included in the diffusion transport equations in the ferromagnets. The results allow determination of different contributions to the magnetoresistance, which can play an important role in optimizing prospective magnetic stray field sensors. They also may be useful in the determination of spin transport properties of metallic magnetic heterostructures in other experiments based on magnetoresistance measurements.

We show that it is possible to engineer magnetic multidomain configurations without domain walls in a prototypical rare-earth-transition-metal ferrimagnet using keV He^{+} ion bombardment. We additionally show that these patterns display a particularly stable magnetic configuration due to a deep minimum in the energy of the system caused by flux closure and a corresponding reduction of the magnetostatic energy without an increase in energy by exchange and anisotropy terms across the walls. This occurs because light-ion bombardment affects an element's relative contribution to the properties of the ferrimagnet differently. Therefore, it is possible to control the relative contribution from each magnetic subsystem. The selection of material and the use of light-ion bombardment allow us to engineer domain patterns in continuous magnetic films, which open a way to fabricate them in a much smaller scale than currently possible. Our Letter emphasizes that the right criterion to determine the presence or absence of a domain wall is whether there is a rotation of the spin for each sublattice and that changes of the direction of effective magnetization alone do not constitute an appropriate criterion.

Possible existence of topologically protected surface in samarium hexaboride has created a strong need for investigations allowing to distinguish between properties coming from the surface states and those originating in the (remaining) bulk. Studies of SmB6 thin films represent a favorable approach allowing well defined variations of the bulk volume that is not affected by surface states. Moreover, thin films are highly desirable for potential technology applications. However, the growth of SmB6 thin films is accompanied by technology problems, which are typically associated with maintaining the correct stoichiometry of samarium and boron. Here we present feasibility study of SmB6 thin film synthesis by pulsed laser deposition (PLD) from a single stoichiometric SmB6 target. As proved by Rutherford Backscattering Spectrometry (RBS), we succeeded to obtain the same ratio of samarium and boron in the films as that in the target. Thin films revealing characteristic electrical properties of (crystalline) SmB6 were successfully deposited on MgO, sapphire, and glass-ceramics substrates, when the substrates were kept at temperature of 600 °C during the deposition. Performed electrical resistance studies have revealed that bulk properties of the films are only slightly affected by the substrate. Our results indicate that PLD is a suitable method for complex and intensive research of SmB6 and similar systems.

We show that it is possible to engineer magnetic multidomain configurations without domain walls in a prototypical rare-earth-transition-metal ferrimagnet using keV He^{+} ion bombardment. We additionally show that these patterns display a particularly stable magnetic configuration due to a deep minimum in the energy of the system caused by flux closure and a corresponding reduction of the magnetostatic energy without an increase in energy by exchange and anisotropy terms across the walls. This occurs because light-ion bombardment affects an element's relative contribution to the properties of the ferrimagnet differently. Therefore, it is possible to control the relative contribution from each magnetic subsystem. The selection of material and the use of light-ion bombardment allow us to engineer domain patterns in continuous magnetic films, which open a way to fabricate them in a much smaller scale than currently possible. Our Letter emphasizes that the right criterion to determine the presence or absence of a domain wall is whether there is a rotation of the spin for each sublattice and that changes of the direction of effective magnetization alone do not constitute an appropriate criterion.

Reduced graphene oxide–magnetite hybrid aerogels attract great interest thanks to their potential applications, e.g., as magnetic actuators. However, the tendency of magnetite particles to migrate within the matrix and, ultimately, escape from the aerogel structure, remains a technological challenge. In this article we show that coating magnetite particles with polydopamine anchors them on graphene oxide defects, immobilizing the particles in the matrix and, at the same time, improving the aerogel structure. Polydopamine coating does not affect the magnetic properties of magnetite particles, making the fabricated materials promising for industrial applications.

Thin films of SmB 6 were prepared by PLD on several substrates kept at ambient temperature or at 600 ° C during the deposition. As shown, also post-deposition annealing at 600 ° C can be used to obtain good quality SmB 6 , but heating the substrate during deposition results in higher normalized resistance. The highest value R (2 K)/ R (300 K = 2.21 was achieved for the film deposited on a heated, polished ultra-low expansion glass ceramics substrate Clearceram®-Z. Electrical resistance measurements were performed at temperatures from 300 K down to 2 K. Numerical analysis showed that the resistivity can be described by a two-channel model with temperature activated and non-activated terms, while two energy scales were found. Activation energy W A = 3.7 − 4.8 meV, relevant in temperature interval 16 − 22 K, has been attributed to presence of a forbidden gap in SmB 6 and W D = 0.31 − 0.37 meV, which corresponds to the region 2 − 3.3 K is assumed to be a consequence of an impurity band in the forbidden gap.

Gd2(MoO4)3 (GMO) is a well-studied multiferroic material that exhibits full ferroelectric and ferroelastic behavior at room temperature. However, its difficult stabilization in thin films has prevented the study and exploitation of its multiferroic properties in different architectures. Here, we report on the study of GMO thin films deposited on Si(001) substrates by Pulsed Laser Deposition (PLD). The physicochemical properties of the films are discussed and studied. Results obtained by X-ray diffraction, X-ray photoelectron spectroscopy, high resolution transmission microscopy and second harmonic generation show that the orthorhombic (β′-GMO) multiferroic phase can be stabilized and homogenized by post deposition thermal reconstruction. Finally, the reconstruction process takes place via a complex surface mechanism with a clear leaf-like behavior.

A magnetic multilayer of substrate/Pt-15 nm/Co-0.8 nm/Pt-wedge 0–7 nm/Co-0.6 nm/Pt-2 nm structure is characterized by a perpendicular anisotropy of the Co layers and by graded interlayer coupling between them. Using magnetooptical Kerr microscopy we observed a distinct influence of magnetic domains in one Co layer on the nucleation field and positions of nucleation sites of reversed domains in the second Co layer. For sufficiently strong interlayer coupling a replication of magnetic domains from the magnetically harder layer to the magnetically softer layer is observed.

Magnonics research, i.e. the manipulation of spin waves for information processing, is a topic of intense research interest in the past years. FMR, BLS and MOKE measurements lead to tremendous success and advancement of the field. However, these methods are limited in their spatial resolution. X-ray microscopy opens up a way to push to spatial resolutions below 100 nm. Here, we discuss the methodology of STXM for pump-probe data acquisition with single photon counting and arbitrary excitation patterns. Furthermore, we showcase these capabilities using two magnonic crystals as examples: an antidot lattice and a Fibonacci quasicrystal.

As spintronics continues its march to replace conventional electronics, spin-orbit-torque (SOT) -induced magnetization switching attracts much attention, due to its relatively low switching current density, and scalability. SOT requires the breaking of time-reversal symmetry, and is typically assisted by an external magnetic field, or additional antiferromagnetic layers in a device. However, this study presents SOT-driven switching $w\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}t\phantom{\rule{0}{0ex}}h\phantom{\rule{0}{0ex}}o\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}t$ an external field, in multilayers consisting of two ferromagnetic Co layers with mixed anisotropies, separated by a Pt spacer acting as a source of spin current. This structure has potential in particular for applications in neuromorphic computing.

Magnonic crystals (magnetic metamaterials for manipulating spin waves) are important building blocks for rf filters and logic. However, regular crystals pose significant constraints for complex designs. This study combines time-resolved x-ray microscopy and numerical modeling to show that quasiperiodic Fibonacci crystals provide advanced control of the magnonic band structure. Furthermore, x-ray microscopy yields insight into the quasicrystal's inner workings, and a simple analytical model is derived to facilitate application of these systems.

Magnonic quasicrystals can be used to manipulate spin waves, offering possibilities beyond those of periodic magnonic crystals. The authors investigate one-dimensional magnonic Fibonacci quasicrystals and demonstrate the existence of collective spin waves over a broad range of wave vectors. The spin-wave spectra here are tunable by changing magnetic field amplitude (for continuous band-structure adjustment), magnetization configuration (for reprogrammability), or the dimensions of the elements (for scalability). Beyond being fundamentally interesting, these properties show that magnonic quasicrystals are promising for tomorrow's spintronic, microwave, and magnonic technologies.

The spin Hall effect (SHE) may be used to control the magnetization state of a nanomagnet by exerting spin torque. In a practical system, both spin Hall and interfacial contributions to the torque coexist, making quantitative analysis of SHE difficult. This study uses the dependence of SHE on the thickness of the heavy-metal layer in heterostructures with different combinations of W, Pt, and Co-Fe-B to distinguish the various torque contributions. Both significant interfacial effects and accumulation of spin current in a sandwiched ferromagnet are observed, improving prospects for applications in spintronics.

We investigate experimentally and theoretically the magnetization reversal process in one-dimensional magnonic structures composed of permalloy nanowires of the two different widths and finite length arranged in a periodic and quasiperiodic order. The main features of the hysteresis loop are determined by different shape anisotropies of the component elements and the dipolar interactions between them. We showed, that the dipolar interactions between nanowires forming a ribbon can be controlled by change a distance between the neighboring ribbons. The quasiperiodic order can influence the hysteresis loop by introduction additional tiny switching steps when the dipolar interactions are sufficiently strong., 10 pages, 7 figures

The ability to perform wide-range tuning of the magnetic field required to switch the magnetization of ferromagnetic layers with perpendicular magnetic anisotropy is of great importance for many applications. We show that, for (Au/Co)2(3) multilayers, this field can be changed from minus several kOe to plus several kOe because of changes to the coupling with a ferrimagnetic multilayer [either (Tb/Fe)6 or (Tb/Co)6] across a Au spacer (either homogeneous 1 nm thick or wedge-shaped). The adjustable parameters are the ratio of sublayer thicknesses of the ferrimagnet and the sequence of layers around the Au spacer. The change of the sequence from Co/Au/Co to Tb/Au/Co is accompanied by both the reduction of the interaction energy and the change of the magnetic field sign necessary to switch the magnetization of ferromagnetic multilayers. For a 1 nm thick Au spacer this fields change from positive (negative) to negative (positive) if the ferrimagnet is dominated by the transition metal (rare earth) as a result of its composition. The characteristic oscillatory behavior of RKKY-like coupling is demonstrated using a system with a wedge-shaped Au spacer.

Asymmetric Ir/Co/Pt and Pt/Co/Ir trilayers with a wedged Co layer (Co thickness d = 0 ÷ 3.6 nm) were deposited by magnetron sputtering on naturally oxidized Si substrates with a Ta/Au buffer. Their magnetic properties have been investigated using magneto-optical polar Kerr effect and Brillouin light scattering (BLS) technique in the Damon-Eshbach geometry. The BLS measurements shows a frequency asymmetry between Stokes and anti-Stokes peaks position, exploited to determine interfacial Dzyaloshinskii-Moriya interaction energy density DS. DS was nearly two times larger for the Ir/Co/Pt trilayer than for the Pt/Co/Ir with opposite chirality. The effective uniaxial magnetic anisotropy and Ds depend non-monotonically on d with a maximum at d ≈ 1.2 nm. The asymmetry in linewidth for Stokes and anti-Stokes peaks is observed for both Ir/Co/Pt and Pt/Co/Ir trilayers for d

Laser-induced magnetization dynamics was investigated in Co/Pt/Co trilayer, with 1 nm thick Co-sublayers, as a function of Pt-spacer layer thickness ( d Pt ) using time-resolved magneto-optical Kerr effect. The magnetization precession parameters: frequency (f), amplitude (A) and effective damping parameter ( α eff ) dependencies on the external magnetic field (H) were determined as a function of d Pt . Three different regions of Pt layer thickness: 0–1.3 nm, 1.3–2.5 nm, and 2.5–4 nm, denoted as regions I, II, and III, respectively, exhibiting distinctly different magnetic properties, were distinguished. It is found that as d Pt increases reorientation of Co-magnetizations from in-plane to perpendicular direction occurs at d Pt around 1.2 nm. For d Pt > 2.5 nm magnetization reorientation from parallel to the orthogonal directions due to mixed anisotropies in Co-layers appears. It is found that in the whole d Pt range single magnetization precession frequency occurs, despite different effective magnetic anisotropies of Co-sublayers. Simulation of the magnetization precession parameters was performed in an effective magnetic layer model. We found that the observed A ( H ) behavior is well simulated within the model in region I and III. The α eff ( H ) correlations with A ( H ) in different d Pt regions are discussed.

Intercalation of solid and molecular species underneath 2D materials is one of the hottest topics in physics and chemistry nowadays – being important from the point of view of well-defined 2D materials-metals contacts formation, as well as performing catalytic reactions under cover. The confined space available for the intercalated layer’s formation often favours unique structural arrangements which are, however, difficult to study directly using conventional surface science techniques. We used directional elastic peak electron spectroscopy (DEPES) in combination with low energy electron diffraction (LEED), Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS) to determine the structure of a Pb layer underneath epitaxial graphene (Gr) on Ru(0001). The results reveal that Pb forms a (√7×√7)R19.1° structure underneath Gr, which is similar to that formed by Pb on clean Ru(0001). As DEPES measurements utilize conventional LEED/AES optics commonly available in surface science laboratories, our approach can be adapted by other groups for the determination of the structure of various layers under 2D-covers.

Colloidal magnetophoretic lensing of water suspended micrometer-sized superparamagnetic beads (SPBs) above a topographically patterned magnetic thin film system with perpendicular magnetic anisotropy is demonstrated. The magnetic pattern consisting of concentric annuli of micron-sized widths has been superimposed with a rotating external magnetic field, and it is shown that the trajectories of the SPBs above this structure are similar to light rays in an optical focusing lens. SPB trajectories converge towards the central region and have divergent trajectories while passing the center. The experimental findings are corroborated by a quantitative model for the SPB trajectories. The magnetophoretic lensing effect leads to a high SPB concentration in the center of the pattern and may be useful for applications where SPBs have to approach each other in a controlled way.

Topological insulators insulate in the bulk but exhibit robust conducting edge states protected by the topology of the bulk material. Here, we design a colloidal topological insulator and demonstrate experimentally the occurrence of edge states in a classical particle system. Magnetic colloidal particles travel along the edge of two distinct magnetic lattices. We drive the colloids with a uniform external magnetic field that performs a topologically non-trivial modulation loop. The loop induces closed orbits in the bulk of the magnetic lattices. At the edge, where both lattices merge, the colloids perform skipping orbits trajectories and hence edge-transport. We also observe paramagnetic and diamagnetic colloids moving in opposite directions along the edge between two inverted patterns; the analogue of a quantum spin Hall effect in topological insulators. We present a new, robust, and versatile way of transporting colloidal particles, enabling new pathways towards lab on a chip applications.

Nowadays, the CoFeB thin layered film is intensively studied because of its potential applications in spintronic devices, especially devices based on spin-transfer torque phenomena. Hitherto, it has been shown that CoFeB may possess perpendicular magnetic anisotropy (PMA) when it is sandwiched between different layers (e.g. MgO, Pt, Pd, Ta, W). However, there is no experimental evidence that CoFeB, sandwiched between Au layers, has strong PMA. Moreover, in comparison with other noble metals, Au-based film systems exhibit the smallest spin pumping effect, which provides the main contribution to the damping in thin films in contact with heavy metals. Therefore, Au/CoFeB/Au may be a good candidate for future applications, where perpendicular magnetic anisotropy and low damping are required. Here, we show that PMA and low damping can be achieved in a Au/CoFeB/Au system without annealing.

The topologically protected transport of colloidal particles on top of periodic magnetic patterns is studied experimentally, theoretically, and with computer simulations. To uncover the interplay between topology and symmetry we use patterns of all possible two dimensional magnetic point group symmetries with equal lengths lattice vectors. Transport of colloids is achieved by modulating the potential with external, homogeneous but time dependent magnetic fields. The modulation loops can be classified into topologically distinct classes. All loops falling into the same class cause motion in the same direction, making the transport robust against internal and external perturbations. We show that the lattice symmetry has a profound influence on the transport modes, the accessibility of transport networks, and the individual transport directions of paramagnetic and diamagnetic colloidal particles. We show how the transport of colloidal particles above a two fold symmetric stripe pattern changes from universal adiabatic transport at large elevations via a topologically protected ratchet motion at intermediate elevations toward a non-transport regime at low elevations. Transport above four-fold symmetric patterns is closely related to the two-fold symmetric case. The three-fold symmetric case however consists of a whole family of patterns that continuously vary with a phase variable. We show how this family can be divided into two topologically distinct classes supporting different transport modes and being protected by proper and improper six fold symmetries. We discuss and experimentally demonstrate the topological transition between both classes. All three-fold symmetric patterns support independent transport directions of paramagnetic and diamagnetic particles. The similarities and the differences in the lattice symmetry protected transport of classical over-damped colloidal particles versus the topologically protected transport in quantum mechanical systems are emphasized.

The determination of the interfacial Dzyaloshinskii-Moriya interaction for perpendicularly magnetized thin layered films is not trivial and therefore needs some experimental efforts to determine its sign and magnitude, especially in the exchange biased system. Here, we developed a method proposed by D.-S. Han et al. [Nano Lett. 16, (2016) 4438], which opens a way to investigate this interaction using a conventional PMOKE magnetometer, also in exchange biased systems. Using our approach we demonstrated that the Au/Co/NiO layered system has a strong negative Dzyaloshinskii-Moriya interaction, which is independent of the direction of perpendicular interlayer exchange bias coupling., Comment: 10 pages, 4 figures

The results of combined (experimental, analytical, and micromagnetic simulations) studies on the evolution of magnetization states and processes in ultrathin films and multilayered systems are presented. We show ways to manipulate magnetization distributions in ultrathin magnetic single or multilayers by tuning: the thickness of the magnetic layer, the thickness of either the non-magnetic cap or spacer layer, the magnetic anisotropy, and the geometrical constrictions of the system. In ultrathin magnetic films, both the magnetization distribution and the critical thickness of the magnetization reorientation phase transition (RPT) between perpendicular and in-plane states can be also controlled by post-growth treatments, e.g., by either ion or light irradiation. By changing the geometrical parameters of the nanostructure, as well as by an applied external magnetic field, one can tune magnetic domain sizes in a giant range (of a few orders of magnitude) and induce the RPT. Transitions between two- and three-dimensional magnetization distributions are discussed.

Here, we systematically investigated the influence of ion bombardment with different fluences on the strength and direction of the exchange bias coupling in Au/Co/NiO systems with perpendicular magnetic anisotropy of the Co layer. We found that the direction of the exchange bias coupling can be reversed as a result of ion bombardment performed in an external magnetic field which is in the opposite direction to the magnetic field applied during film deposition. Moreover, the strength of the exchange bias coupling can be tailored by varying the ion fluence. These results show behaviors similar to the results found for systems of ferromagnetic layers with in-plane anisotropy. Our experimental work, supported by a two-energy-level model, demonstrates that exchange bias coupling can be tuned in a layered system with perpendicular magnetic anisotropy using ion bombardment.

We demonstrate non-thermal ultrafast laser excitation of spin precession with THz frequency in Gd-Bi-substituted iron garnet via the inverse Faraday effect. The modulation of THz precession by about 60 GHz below the compensation temperature of magnetic moment was observed. The THz frequency precession was caused by the exchange resonance between the Gd and Fe sublattices; we attributed the low-frequency modulation to dielectric resonance mode with a magnetic contribution. We demonstrate the possibility of polarization-sensitive control of spin precession under THz generation by laser pulses, helping to develop high-speed magneto-optical devices.

We measure magnetization reversal and giant magnetoresistance of CoFe/Au/Co/Au multilayers and use micromagnetic simulations to model them. We characterize the system by perpendicular and easy-plane effective anisotropy of Co and CoFe layers, respectively. We show that minor hystereses of magnetoresistance can be reasonably well described by the model. The simulations show that the variation of resistance with the field depends on the field strength at which the sweep reverses, and is correlated with the number of stripe domains present in the Co layers.

The behaviour of Rayleigh and Sezawa surface phonons propagating in magnetic multilayers [Ni80Fe20/Au/Co/Au]10 on silicon substrate was studied by high-resolution Brillouin spectroscopy. The dispersion dependence of the phase velocity was determined as a function of wavenumber and the angular dispersion was tested. A simulation of the dispersion dependence was made by the finite element method and the results were compared with those of the experiment.

Sputter deposited ( Ni 80 Fe 20 - 2 nm / Au- 2 nm / Co- t Co / Au- 2 nm ) 10 multilayers are characterized by alternating in-plane ( Ni 80 Fe 20 ) and out-of-plane (for Co thickness in the range 0.3 t Co 1.2 nm ) magnetic anisotropy. The magnetic properties of the samples, before and after ion bombardment, were characterized by magnetometric and magnetoresistive measurements. The irradiation process was performed with fluences of 30 keV He + ions varied in the range 10 13 ⩽ D ⩽ 3 × 10 16 He + / cm 2 . We report that for fluences in the range between 10 15 and 10 16 He + / cm 2 the effective (perpendicular) anisotropy of the Co layer decreases noticeably. The origin of the effect is related to a reduction in the surface anisotropy thus to interfaces modification. As a consequence strong reduction of magnetoresistance was also observed.

[Co83Fe17/Au/Co/Au]N sputter deposited multilayers displaying a giant magnetoresistance have been investigated. Complementary magnetic measurements were conducted in order to characterize a spin reorientation transition in Co83Fe17 layers sandwiched between Au spacers. The transition from a perpendicular magnetic anisotropy to easy-plane one takes place at the thickness of about 1 nm.

Magnetic hysteresis of [ CoFe / Au / Co / Au ] N multilayers displaying giant magnetoresistance was investigated. It is shown that an effective coupling between the neighboring magnetic layers can be modified by the changes of the structure of the multilayers. It is shown, too, that this coupling is influenced by temperature. Some of the observed dependencies are explained on the basis of micromagnetic simulations.