Search

The reconstruction of critical-size bone defects in long bones remains a challenge for clinicians. We developed a new bioactive medical device for long bone repair by combining a 3D-printed architectured cylindrical scaffold made of clinical-grade polylactic acid (PLA) with a polyelectrolyte film coating delivering the osteogenic bone morphogenetic protein 2 (BMP-2). This film-coated scaffold was used to repair a sheep metatarsal 25-mm long critical-size bone defect.In vitroandin vivobiocompatibility of the film-coated PLA material were proved according to ISO standards. Scaffold geometry was found to influence BMP-2 incorporation. Bone regeneration was followed using X-ray scans, µCT scans, and histology. We showed that scaffold internal geometry, notably pore shape, influenced bone regeneration, which was homogenous longitudinally. Scaffolds with cubic pores of ∼870 µm and a low BMP-2 dose of ∼120 µg/cm3induced the best bone regeneration without any adverse effects. The visual score given by clinicians during animal follow-up was found to be an easy way to predict bone regeneration. This work opens perspectives for a clinical application in personalized bone regeneration.

The spatial organization of cell-surface receptors is fundamental for the coordination of biological responses to physical and biochemical cues of the extracellular matrix. How serine/threonine kinase receptors, ALK3-BMPRII, cooperate with integrins upon BMP2 to drive cell migration is unknown. Whether the dynamics between integrins and BMP receptors intertwine in space and time to guide adhesive processes is yet to be elucidated. We found that BMP2 stimulation controls the spatial organization of BMPRs by segregating ALK3 from BMPRII into β3 integrin-containing focal adhesions. The selective recruitment of ALK3 to focal adhesions requires β3 integrin engagement and ALK3 activation. BMP2 controls the partitioning of immobilized ALK3 within and outside focal adhesions according to single-protein tracking and super-resolution imaging. The spatial control of ALK3 in focal adhesions by optogenetics indicates that ALK3 acts as an adhesive receptor by eliciting cell spreading required for cell migration. ALK3 segregation from BMPRII in integrin-based adhesions is a key aspect of the spatio-temporal control of BMPR signaling.

International audience; The automation of liquid handling routines offers great potential for fast, reproducible and laborreduced biomaterials fabrication but also requires the development of special protocols. Competitive systems demand for a high degree in miniaturization and parallelization while maintaining flexibility regarding the experimental design. To day, there are only few possibilities for automated fabrication of biomaterials inside multi-well plates. We have previously demonstrated that streptavidin-based biomimetic platforms can be employed to study cellular behaviors on biomimetic surfaces. So far, these self-assembled materials were made by stepwise assembly of the components using manual pipetting. In this work, we introduce for the first time a fully automated and adaptable workflow to functionalize glass-bottom multi-well plates with customized biomimetic platforms deposited in single wells using a liquid handling robot. We then characterize cell response using automated image acquisition and subsequent analysis. Furthermore, the molecular surface density of the biomimetic platforms was characterized in situ using fluorescence-based image correlation spectroscopy. These measurements were in agreement with standard ex situ spectroscopic ellipsometry measurements. Thanks to automation, we could do a proof-of-concept to study the effect of heparan sulfate on the bioactivity of bone morphogenetic proteins on myoblast cells, using four different BMPs (2,4,6 and 7) in parallel, at five increasing concentrations. Using such automated self-assembly of biomimetic materials, it may be envisioned to further investigate the role of a large variety of ECM components and growth factors on cell signaling.

Two-photon polymerization has recently emerged as a promising technique to fabricate scaffolds for three-dimensional (3D) cell culture and tissue engineering. Here, we combined 3D-printed microscale scaffolds fabricated using two-photon polymerization with a bioactive layer-by-layer film coating. This bioactive coating consists of hyaluronic acid and poly(l-lysine) of controlled stiffness, loaded with fibronectin and bone morphogenic proteins 2 and 4 (BMP2 and BMP4) as matrix-bound proteins. Planar films were prepared using a liquid handling robot directly in 96-well plates to perform high-content studies of cellular processes, especially cell adhesion, proliferation, and BMP-induced signaling. The behaviors of two human pancreatic cell lines PANC1 (immortalized) and PAN092 (patient-derived cell line) were systematically compared and revealed important context-specific cell responses, notably in response to film stiffness and matrix-bound BMPs (bBMPs). Fibronectin significantly increased cell adhesion, spreading, and proliferation for both cell types on soft and stiff films; BMP2 increased cell adhesion and inhibited proliferation of PANC1 cells and PAN092 on soft films. BMP4 enhanced cell adhesion and proliferation of PANC1 and showed a bipolar effect on PAN092. Importantly, PANC1 exhibited a strong dose-dependent BMP response, notably for bBMP2, while PAN092 was insensitive to BMPs. Finally, we proved that it is possible to combine a microscale 3D Ormocomp scaffold fabricated using the two-photon polymerization technique with the bioactive film coating to form a microscale tumor tissue and mimic the early stages of metastatic cancer.

International audience; While a soft film itself is not able to induce cell spreading, BMP-2 presented via such soft film (so called“matrix-bound BMP-2”) was previously shown to trigger cell spreading, migration and downstream BMP-2signaling. Here, we used thin films of controlled stiffness presenting matrix-bound BMPs to study the effectof four BMP members (BMP-2, 4, 7, 9) on cell adhesion and differentiation of skeletal progenitors. Weperformed automated high content screening of cellular responses, including cell number, cell spreading area,SMAD phosphorylation and alkaline phosphatase activity. We revealed that the cell response to bBMPs isBMP-type specific and involved certain BMP receptors and beta chain integrins. In addition, this response isstiffness-dependent for several receptors. The basolateral presentation of the BMPs allowed us to discriminatethe specificity of cellular response and the role of type I and II BMP receptors and of β integrins in a BMPtypeand stiffness-dependent manner. Notably, the role of BMP-2 and BMP-4 were found to have distinctroles, while ALK5, previously known as a TGF-β receptor was revealed to be involved in the BMP-pathway.

The reconstruction of large bone defects (12 cm3) remains a challenge for clinicians. We developed a new critical-size mandibular bone defect model on a minipig, close to human clinical issues. We analyzed the bone reconstruction obtained by a 3D-printed scaffold made of clinical-grade polylactic acid (PLA), coated with a polyelectrolyte film delivering an osteogenic bioactive molecule (BMP-2). We compared the results (computed tomography scans, microcomputed tomography scans, histology) to the gold standard solution, bone autograft. We demonstrated that the dose of BMP-2 delivered from the scaffold significantly influenced the amount of regenerated bone and the repair kinetics, with a clear BMP-2 dose-dependence. Bone was homogeneously formed inside the scaffold without ectopic bone formation. The bone repair was as good as for the bone autograft. The BMP-2 doses applied in our study were reduced 20- to 75-fold compared to the commercial collagen sponges used in the current clinical applications, without any adverse effects. Three-dimensional printed PLA scaffolds loaded with reduced doses of BMP-2 may be a safe and simple solution for large bone defects faced in the clinic., Graphical abstract Image 1, Highlights • We created a critical-size bone defect model in the mandible of mature minipigs, close to multiple clinical applications. • We engineered a new 3D-printed scaffold made of clinical-grade PLA and manufactured by FDM to fill the defect. • The BMP-2 dose released from the implants significantly influenced the amount of regenerated bone and the repair kinetics. • Bone reconstructed using this osteoinductive implant was homogeneous. • 3D-printed PLA scaffolds coated with 2D osteoinductive coatings lead to similar bone regeneration as bone autograft.

We establish a method, called pbFFS for photobleaching Fluctuation Fluorescence Spectroscopy, which aims at characterizing molecules or particles labelled with a unknown distribution or fluorophores. Using photobleaching as a control parameter, pbFFS provides information on the distribution of labels and a more reliable estimation of the absolute density or concentration of these molecules. We present a complete theoretical derivation of the pbFFS approach and experimentally apply it to measure the surface density of a monolayer of fluorescently tagged streptavidin molecules that can be used as a base platform for biomimetic systems. The surface density measured by pbFFS is consistent with the results of more standard surface techniques, such as ellipsometry. Compared to those techniques, pbFFS has two main advantages: it enables in situ characterization (no dedicated substrates are required) and is applicable to low masses of adsorbed molecules, as demonstrated here by quantifying the density of biotin-Atto molecules that bind to the streptavidin layer. Besides molecules immobilized on surfaces, we also applied pbFFS to molecules diffusing in solution, to confirm the distribution of labels found on surfaces. Hence, pbFFS provides a set of tools to investigate molecules attached to a variable number of fluorophores, with the aim toquantify either the number of molecules or the distribution of fluorophores, the latter case being especially relevant for oligomerization studies., Comment: 31 pages, 7 figures and supporting information (4 pages, including 2 figures)

Additive manufacturing (AM) allows the fabrication of customized bone scaffolds in terms of shape, pore size, material type and mechanical properties. Combined with the possibility to obtain a precise 3D image of the bone defects using computed tomography or magnetic resonance imaging, it is now possible to manufacture implants for patient-specific bone regeneration. This paper reviews the state-of-the-art of the different materials and AM techniques used for the fabrication of 3D-printed scaffolds in the field of bone tissue engineering. Their advantages and drawbacks are highlighted. For materials, specific criteria, were extracted from a literature study: biomimetism to native bone, mechanical properties, biodegradability, ability to be imaged (implantation and follow-up period), histological performances and sterilization process. AM techniques can be classified in three major categories: extrusion-based, powder-based and liquid-base. Their price, ease of use and space requirement are analyzed. Different combinations of materials/AM techniques appear to be the most relevant depending on the targeted clinical applications (implantation site, presence of mechanical constraints, temporary or permanent implant). Finally, some barriers impeding the translation to human clinics are identified, notably the sterilization process.

the reconstruction of large bone defects (12 cm3) remains a challenge for clinicians. We developed a new critical-size mandibular bone defect model on a mini-pig, close to human clinical issues. We analyzed the bone reconstruction obtained by a 3D printed scaffold made of clinical-grade PLA, coated with a polyelectrolyte film delivering an osteogenic bioactive molecule (BMP-2). We compared the results (CT-scan, μCT, histology) to the gold standard solution, bone autograft. We demonstrated that the dose of BMP-2 delivered from the scaffold significantly influenced the amount of regenerated bone and the repair kinetics, with a clear BMP-2 dose-dependence. Bone was homogeneously formed inside the scaffold without ectopic bone formation. The bone repair was as good as for the bone autograft. The BMP-2 doses applied in our study were reduced 20 to 75-fold compared to the commercial collagen sponges used in the current clinical applications, without any adverse effects. 3D printed PLA scaffolds loaded with reduced doses of BMP-2 can be a safe and simple solution for large bone defects faced in the clinic.

International audience; Pruritus is a common symptom of bullous pemphi-goid (BP), but has been poorly studied. The aim of this study was to analyse the characteristics of pruritus in patients with BP and its impact on their quality of life. A multicentre prospective observational study (in 15 French hospitals) was performed. A total of 60 patients were included, with a mean age of 77.4 years. Pru-ritus occurred daily in 85% of patients, with a mean pruritus intensity of 5.2/10. Tingling sensations were present in 72.4% of patients and burning sensations in 68.9%. Pruritus was exacerbated by stress, fatigue and xerosis. The mean ItchyQol score was 56.2/110 and the mean 5-D Itch Scale score was 16.5/25. The severity of pruritus was not related to age, sex, BP activity score, eosinophilia, or anti-BP230 and anti-BP180 autoantibodies. This study revealed that pruri-tus in BP is poorly tolerated and is an important cause of impaired quality of life. .

Bone morphogenetic proteins (BMP) are an important family of growth factors playing a role in a large number of physiological and pathological processes, including bone homeostasis, tissue regeneration and cancers. In vivo , BMPs bind successively to both BMP receptors (BMPR) of type I and type II, and a promiscuity has been reported. In this study, we used bio-layer interferometry to perform parallel real-time biosensing and to deduce the kinetic parameters (k a , k d ) and the equilibrium constant (K D ) for a large range of BMPs/BMPR combinations in similar experimental conditions. We selected four members of the BMP family (BMP-2, 4, 7, 9) known for their physiological relevance and studied their interactions with five type-I BMP receptors (ALK1, 2, 3, 5, 6) and three type-II BMP receptors (BMPR-II, ACTR-IIA, ACTR-IIB). We reveal that BMP-2 and BMP-4 behave differently, especially regarding their kinetic interactions and affinities with the type-II BMPR. We found that BMP-7 has a higher affinity for ACTR-IIA and a tenfold lower affinity with the type-I receptors. While BMP-9 has a high and similar affinity for all type-II receptors, it can interact with ALK5 and ALK2, in addition to ALK1. Interestingly, we also found that all BMPs can interact with ALK5. The interaction between BMPs and both type-I and type II receptors immobilized on the same surface did not reveal further cooperativity. Our work provides a synthetic view of the interactions of these BMPs with their receptors and paves the way for future studies on their cell-type and receptor specific signaling pathways.; Abbreviations BMP-2, bone morphogenetic protein 2; BMP-4, bone morphogenetic protein 4; BMP-7, bone morphogenetic protein 7; BMP-9, bone morphogenetic protein 9; BMPR, Bone morphogenetic protein receptor; ALK1, Activin receptor-like kinase 1; ALK2, Activin receptor-like kinase 2; ALK3, Activin receptor-like kinase 3; ALK5, Activin receptor-like kinase 5; ALK6, Activin receptor-like kinase 6; ECD, extracellular domain; TGFβ, transforming growth factor; TGFβR, transforming growth factor receptor; BLI, Bio-layer interferometry; SPR, Surface plasmon resonance.

International audience; It is nowadays well-accepted that the extracellular matrix (ECM) is not a simple reservoir for growth factors but is an organization center of their biological activity. In this review, we focus on the ability of the ECM to regulate the biological activity of BMPs. In particular, we survey the role of the ECM components, notably the glycosaminoglycans and fibrillary ECM proteins, which can be promoters or repressors of the biological activities mediated by the BMPs. We examine how a process called mechano-transduction induced by the ECM can affect BMP signaling, including BMP internalization by the cells. We also focus on the spatio-temporal regulation of the BMPs, including their release from the ECM, which enables to modulate their spatial localization as well as their local concentration. We highlight how biomaterials can recapitulate some aspects of the BMPs/ECM interactions and help to answer fundamental questions to reveal previously unknown molecular mechanisms. Finally, the design of new biomaterials inspired by the ECM to better present BMPs is discussed, and their use for a more efficient bone regeneration in vivo is also highlighted.

full test at https://authors.elsevier.com/a/1bffh6CFjZFwM1; International audience; The chemical and physical properties of the extracellular matrix (ECM) are known to be fundamental for regulating growth factor bioactivity. The role of heparan sulfate (HS), a glycosaminoglycan, and of cell adhesion proteins (containing the cyclic RGD (cRGD) ligands) on bone morphogenetic protein 2 (BMP2)- mediated osteogenic differentiation has not been fully explored. In particular, it is not known whether and how their effects can be potentiated when they are presented in controlled close proximity, as in the ECM. Here, we developed streptavidin platforms to mimic selective aspects of the in vivo presenta- tion of cRGD, HS and BMP2, with a nanoscale-control of their surface density and orientation to study cell adhesion and osteogenic differentiation. We showed that whereas a controlled increase in cRGD sur- face concentration upregulated BMP2 signaling due to β3 integrin recruitment, silencing either β1 or β3 integrins negatively affected BMP2-mediated phosphorylation of SMAD1/5/9 and alkaline phosphatase expression. Furthermore, the presence of adsorbed BMP2 promoted cellular adhesion at very low cRGD concentrations. Finally, we proved that HS co-immobilized with cRGD both sustained BMP2 signaling and enhanced osteogenic differentiation com pared to BMP2 directly immobilized on streptavidin, even with a low cRGD surface concentration. Altogether, our results show that HS facilitated and sustained the syn- ergy between BMP2 and integrin pathways and that the co-immobilization of HS and cRGD peptides optimised BMP2-mediated osteogenic differentiation. Statement of significance The growth factor BMP2 is used to treat large bone defects. Previous studies have shown that the pre- sentation of BMP2 via extracellular matrix molecules, such as heparan sulfate (HS), can upregulate BMP2 signaling. The potential advantages of dose reduction and local specificity have stimulated interest in further investigations into biomimetic approaches. We designed a streptavidin model surface eligible for immobilizing tunable amounts of molecules from the extracellular space, such as HS, adhesion motifs (cyclic RGD) and BMP2. By studying cellular adhesion, BMP2 bioactivity and its osteogenic potential we reveal the combined effect of integrins, HS and BMP2, which contribute in answering fundamental ques- tions regarding cell-matrix interaction.

In addition to mesenchymal stem cells, adipose-derived stem/stromal cells (ASCs) are an attractive source for a large variety of cell-based therapies. One of their most important potential applications is related to the regeneration of bone tissue thanks to their capacity to differentiate in bone cells. However, this requires a proper control of their osteogenic differentiation, which depends not only on the initial characteristics of harvested cells but also on the conditions used for their culture. In this review, we first briefly describe the preclinical and clinical trials using ASCs for bone regeneration and present the quantitative parameters used to characterize the osteogenic differentiation of ASCs. We then focus on the soluble factors influencing the osteogenic differentiation of ACS, including the steroid hormones and various growth factors, notably the most osteoinductive ones, the bone morphogenetic proteins (BMPs). Impact statement Adipose-derived stromal/stem cells are reviewed for their use in bone regeneration.

the reconstruction of large bone defects (12 cm3) remains a challenge for clinicians. We developed a new critical-size mandibular bone defect model on a mini-pig, close to human clinical issues. We analyzed the bone reconstruction obtained by a 3D printed scaffold made of clinical-grade PLA, coated with a polyelectrolyte film delivering an osteogenic bioactive molecule (BMP-2). We compared the results (CT-scan, μCT, histology) to the gold standard solution, bone autograft. We demonstrated that the dose of BMP-2 delivered from the scaffold significantly influenced the amount of regenerated bone and the repair kinetics, with a clear BMP-2 dose-dependence. Bone was homogeneously formed inside the scaffold without ectopic bone formation. The bone repair was as good as for the bone autograft. The BMP-2 doses applied in our study were reduced 20 to 75-fold compared to the commercial collagen sponges used in the current clinical applications, without any adverse effects. 3D printed PLA scaffolds loaded with reduced doses of BMP-2 can be a safe and simple solution for large bone defects faced in the clinic.

Bone fractures are the most common traumatic injuries in humans. The repair of bone fractures is a regenerative process that recapitulates many of the biological events of embryonic skeletal development. Most of the time it leads to successful healing and the recovery of the damaged bone. Unfortunately, about 5-10% of fractures will lead to delayed healing or non-union, more so in the case of co-morbidities such as diabetes. In this article, we review the different strategies to heal bone defects using synthetic bone graft substitutes and biologically active substances or stem cells. Our review is different from previous reviews, which focus on strategies that are still at the early stages of development and use mostly in vitro experiments with cell lines or stem cells. Here, we focus on what is already implemented in the clinics, what is currently in clinical trials, and what has been tested in animal models. Treatment approaches can be classified in three major categories: i) synthetic bone graft substitutes (BGS) whose architecture and surface can be optimized; ii) BGS combined with bioactive molecules such as growth factors, peptides or small molecules targeting bone precursor cells, bone formation and metabolism; iii) cell-based strategies with progenitor cells combined or not with active molecules that can be injected or seeded on BGS for improved delivery. We review the major types of adult stromal cells (bone marrow, adipose and periosteum derived) that have been used and compare their properties. Finally, we discuss the remaining challenges that need to be addressed to significantly improve the healing of bone defects.

Porous polymeric microcarriers are a versatile class of biomaterial constructs with extensive use in drug delivery, cell culture and tissue engineering. Currently, most methods for their production require potentially toxic organic solvents with complex setups which limit their suitability for biomedical applications and their large-scale production. Herein, we report an organic, solvent-free method for the fabrication of porous poly( l -lactide) (PLLA) microcarriers. The method is based on the spherulitic crystallization of PLLA in its miscible blends with poly(ethylene glycol) (PEG). It is shown that the PLLA spherulites are easily recovered as microcarriers from the blends by a water-based process. Independent control over microcarrier size and porosity is demonstrated, with a higher crystallization temperature leading to a larger size, and a higher PLLA content in the starting blend resulting in a lower microcarrier porosity. Microcarriers are shown to be biocompatible for the culture of murine myoblasts and human adipose stromal/stem cells (hASC). Moreover, they support not only the long-term proliferation of both cell types but also hASC differentiation toward osseous tissues. Furthermore, while no significant differences are observed during cell proliferation on microcarriers of two different porosities, microcarriers of lower porosity induce a stronger hASC osteogenic differentiation, as evidenced by higher ALP enzymatic activity and matrix mineralization. Consequently, the proposed organic-solvent-free method for the fabrication of biocompatible porous PLLA microcarriers represents an innovative methodology for ex vivo cell expansion and its application in stem cell therapy and tissue engineering. Statement of Significance We report a new solvent-free method for the preparation of porous polymeric microcarriers for cell culture, based on biocompatible poly( l -lactide), with independently controllable size and porosity. This approach, based on the spherulitic crystallization in polymer blends, offers the advantages of simple implementation, biological and environmental safety, easy adaptability and up-scalablility. The suitability of these microcarriers is demonstrated for long-term culture of both murine myoblasts and human adipose stromal/stem cells (hASCs). We show that prepared microcarriers support the osteogenic differentiation of hASCs, provided microcarriers of properly-tuned porosity are used. Hence, this new method is an important addition to the arsenal of microcarrier fabrication techniques, which will contribute to the adoption, regulatory approval and eventually clinical availability of microcarrier-based treatments and therapies.

International audience; Moesin, a protein of the ezrin, radixin, and moesin family, which links the plasma membrane to the cytoskeleton, is involved in multiple physiological and pathological processes, including viral budding and infection. Its interaction with the plasma membrane occurs via a key phosphoinositide, the phosphatidyl(4,5)inositol-bisphosphate (PIP2), and phosphorylation of residue T558, which has been shown to contribute, in cellulo, to a conformationally open protein. We study the impact of a double phosphomimetic mutation of moesin (T235D, T558D), which mimics the phosphorylation state of the protein, on protein/PIP2/microtubule interactions. Analytical ultracentrifugation in the micromolar range showed moesin in the monomer and dimer forms, with wild-type (WT) moesin containing a slightly larger fraction (∼30%) of dimers than DD moesin (10-20%). Only DD moesin was responsive to PIP2 in its micellar form. Quantitative cosedimentation assays using large unilamellar vesicles and quartz crystal microbalance on supported lipid bilayers containing PIP2 reveal a specific cooperative interaction for DD moesin with an ability to bind two PIP2 molecules simultaneously, whereas WT moesin was able to bind only one. In addition, DD moesin could subsequently interact with microtubules, whereas WT moesin was unable to do so. Altogether, our results point to an important role of these two phosphorylation sites in the opening of moesin: since DD moesin is intrinsically in a more open conformation than WT moesin, this intermolecular interaction is reinforced by its binding to PIP2. We also highlight important differences between moesin and ezrin, which appear to be finely regulated and to exhibit distinct molecular behaviors.

International audience; Bone morphogenetic proteins (BMPs) are an important family of growth factors playing a role in a large number of physiological and pathological processes, including bone homeostasis, tissue regeneration, and cancers. In vivo, BMPs bind successively to both BMP receptors (BMPRs) of type I and type II, and a promiscuity has been reported. In this study, we used biolayer interferometry to perform parallel real-time biosensing and to deduce the kinetic parameters (ka, kd) and the equilibrium constant (KD) for a large range of BMP/BMPR combinations in similar experimental conditions. We selected four members of the BMP family (BMP-2, 4, 7, 9) known for their physiological relevance and studied their interactions with five type-I BMP receptors (ALK1, 2, 3, 5, 6) and three type-II BMP receptors (BMPR-II, ACTR-IIA, ACTR-IIB). We reveal that BMP-2 and BMP-4 behave differently, especially regarding their kinetic interactions and affinities with the type-II BMPR. We found that BMP-7 has a higher affinity for the type-II BMPR receptor ACTR-IIA and a tenfold lower affinity with the type-I receptors. While BMP-9 has a high and similar affinity for all type-II receptors, it can interact with ALK5 and ALK2, in addition to ALK1. Interestingly, we also found that all BMPs can interact with ALK5. The interaction between BMPs and both type-I and type-II receptors in a ternary complex did not reveal further cooperativity. Our work provides a synthetic view of the interactions of these BMPs with their receptors and paves the way for future studies on their cell-type and receptor specific signaling pathways.

Cell migration is part of many important in vivo biological processes and is influenced by chemical and physical factors such as substrate topography. Although the migratory behavior of different cell types on structured substrates has already been investigated, up to date it is largely unknown if specimen's age affects cell migration on structures. In this work, we investigated age-dependent migratory behavior of human endothelial cells from young (≤ 31 years old) and old (≥ 60 years old) donors on poly(dimethylsiloxane) microstructured substrates consisting of well-defined parallel grooves. We observed a decrease in cell migration velocity in all substrate conditions and in persistence length perpendicular to the grooves in cells from old donors. Nevertheless, in comparison to young cells, old cells exhibited a higher cell directionality along grooves of certain depths and a higher persistence time. We also found a systematic decrease of donor age-dependent responses of cell protrusions in orientation, velocity and length, all of them decreased in old cells. These observations lead us to hypothesize a possible impairment of actin cytoskeleton network and affected actin polymerization and steering systems, caused by aging.

International audience

International audience; The increasing demand for bone repair solutions calls for the development of efficacious bone scaffolds. Biphasic calcium phosphate (BCP) scaffolds with both macropores and micropores (MP) have improved healing compared to those with macropores and no micropores (NMP), but the role of micropores is unclear. Here, we evaluate capillarity induced by micropores as a mechanism that can affect bone growth in vivo. Three groups of cylindrical scaffolds were implanted in pig mandibles for three weeks: MP were implanted either dry (MP-Dry), or after submersion in phosphate buffered saline, which fills pores with fluid and therefore suppresses micropore-induced capillarity (MP-Wet); NMP were implanted dry. The amount and distribution of bone in the scaffolds were quantified using micro-computed tomography. MP-Dry had a more homogeneous bone distribution than MP-Wet, although the average bone volume fraction, (BVF) over bar, was not significantly different for these two groups (0.45 +/- 0.03 and 0.37 +/- 0.03, respectively). There was no significant difference in the radial bone distribution of NMP and MP-Wet, but the (BVF) over bar, of NMP was significantly lower among the three groups (0.25 +/- 0.02). These results suggest that micropore-induced capillarity enhances bone regeneration by improving the homogeneity of bone distribution in BCP scaffolds. The explicit design and use of capillarity in bone scaffolds may lead to more effective treatments of large and complex bone defects. Statement of Significance The increasing demand for bone repair calls for more efficacious bone scaffolds and calcium phosphate based materials are considered suitable for this application. Macropores (>100 gm) are necessary for bone ingrowth and vascularization. However, studies have shown that microporosity (

International audience; An automatic method is established for layer-by-layer (LbL) assembly of biomimetic coatings in cell culture microplates using a commercial liquid-handling robot. Highly homogeneous thin films are formed at the bottom of each microwell. The LbL film-coated microplates are compatible with common cellular assays, using microplate readers and automated microscopes. Cellular adhesion is screened on crosslinked and peptide-functionalized LbL films and stem cell differentiation in response to increasing doses of bone morphogenetic proteins (2, 4, 7, 9). This method paves the way for future applications of LbL films in cell-based assays for regenerative medicine and high-throughput drug screening.

We investigated the pH-dependent properties of multilayered films made of chitosan (CHI) and alginate (ALG) and focused on their postassembly response to different pH environments using a quartz crystal microbalance with dissipation monitoring (QCM-D), swelling studies, ζ potential measurements, and dynamic mechanical analysis (DMA). In an acidic environment, the multilayers presented lower dissipation values and, consequently, higher moduli when compared with the values obtained for the pH used during the assembly (5.5). When the multilayers were exposed to alkaline environments, the opposite behavior occurred. These results were further corroborated by the ability of this multilayered system to exhibit a reversible swellingâ deswelling behavior within the pH range from 3 to 9. The changes in the physicochemical properties of the multilayer system were gradual and different from those of individual solubilized polyelectrolytes. This behavior is related to electrostatic interactions between the ionizable groups combined with hydrogen bonding and hydrophobic interactions. Beyond the pH range of 3â 9, the multilayers were stabilized by genipin cross-linking. The multilayered films also became more rigid while the pH responsiveness conferred by the ionizable moieties of the polyelectrolytes was preserved. This work demonstrates the versatility and feasibility of LbL methodology to generate inherently pH stimulus-responsive nanostructured films. Surface functionalization using pH responsiveness endows several biomedical applications with abilities such as drug delivery, diagnostics, microfluidics, biosensing, and biomimetic implantable membranes., We acknowledge the financial support from the Portuguese Foundation for Science and Technology (FCT) through the doctoral and postdoctoral grants with reference numbers SFRH/BD/81372/2011 (J.M.S.), SFRH/BPD/96797/2013 (S.G.C.), and SFRH/BPD/95446/2013 (R.R.C.). This work was financially supported by the Foundation for Science and Technology (FCT) via Project PTDC/FIS/115048/2009. We also acknowledge the project novel smart and biomimetic materials for innovative regenerative medicine approaches (RL1-ABMR-NORTE-01-0124-FEDER-000016) cofinanced by the North Portugal Regional Operational Programme (ON.2-O Novo Norte), under the National Strategic Reference Framework (NSRF), through the European Regional Development Fund (ERDF). C.P. acknowledges the European Commission (FP7) for funding via an ERC grant (GA259370).

The structural changes resulting from the conversion of native cellulose I (Cel I) into allomorphs II (Cel II) and IIII (Cel IIII) have usually been studied using powder samples from plant or algal cellulose. In this work, the conversion of Cel I into Cel II and Cel IIII was performed on bacterial cellulose films without any mechanical disruption. The surface texture of the films was observed by atomic force microscopy (AFM) and the morphology of the constituting cellulose ribbons, by transmission electron microscopy (TEM). The structural changes were characterized using solid-state NMR spectroscopy as well as X-ray and electron diffraction. The allomorphic change into Cel II and Cel IIII resulted in films with different crystallinity, roughness and hydrophobic/hydrophilicity surface and the films remained intact during all process of allomorphic conversion.

Free-standing (FS) membranes have increasing applications in the biomedical field as drug delivery systems for wound healing and tissue engineering. Here, we studied the potential of free-standing membranes made by the layer-by-layer assembly of chitosan and alginate to be used as a simple biomimetic system of the periosteum. The design of a periosteum-like membrane implies the elaboration of a thick membrane suitable for both muscle and bone formation. Our aim was to produce well-defined ∼50 μm thick polysaccharide membranes that could be easily manipulated, were mechanically resistant, and would enable both myogenesis and osteogenesis in vitro and in vivo. The membranes were chemically crosslinked to improve their mechanical properties. Crosslinking chemistry was followed via Fourier transform infrared spectroscopy and the mechanical properties of the membranes were assessed using dynamic mechanical analysis. The loading and release of the potent osteoinductive growth factor bone morphogenetic protein 2 (BMP-2) inside and outside of the FS membrane was followed by fluorescence spectroscopy in a physiological buffer over 1 month. The myogenic and osteogenic potentials of the membranes in vitro were assessed using BMP-2-responsive skeletal myoblasts. Finally, their osteoinductive properties in vivo were studied in a preliminary experiment using a mouse ectopic model. Our results showed that the more crosslinked FS membranes enabled a more efficient myoblast differentiation in myotubes. In addition, we showed that a tunable amount of BMP-2 can be loaded into and subsequently released from the membranes, depending on the crosslinking degree and the initial BMP-2 concentration in solution. Only the more crosslinked membranes were found to be osteoinductive in vivo. These polysaccharide-based membranes have strong potential as a periosteum-mimetic scaffold for bone tissue regeneration., This work was financially supported by the Foundation for Science and Technology (FCT) through the scholarship SFRH/BPD/96797/2013, Fundo Social Europeu (FSE), and Programa Diferencial de Potencial Human (POPH) granted to Sofia G. Caridade. C.M. is indebted to the Association Francaise contre les Myopathies for financial support via a post-doctoral fellowship (AFM project 16673). J.A. acknowledges the Whitaker International Fellows and Scholars Program for support via a post-doctoral fellowship. This work was supported by the European Commission (FP7 program) via a European Research Council starting grant (BIOMIM, GA 259370 to C.P.) and by the AFM (grant Microtiss, 16530). We thank Isabelle Paintrand for her technical help with the confocal apparatus.

During embryogenesis, signaling molecules initiate cell diversification, sometimes via stochastic processes, other times via the formation of long range gradients of activity which pattern entire fields of cells. Such mechanisms are not insensitive to noise (Lander, 2011), yet embryogenesis is a remarkably robust process suggesting that multiple layers of regulations secure patterning during development. In the present study, we present a proof of concept according to which an asymmetric pattern of gene expression obtained from a spatially disorganised population of cells can be guided by the geometry of the environment in a reproducible and robust manner. We used ESC as a model system whithin which multiple developmental cell states coexist (MacArthur and Lemischka, 2013; Smith, 2017; Torres-Padilla and Chambers, 2014). We first present evidence that a reciprocal regulation of genes involved in the establishment of antero-posterior polarity during peri-implantation stages of mouse development is spontaneously occuring within ESC. We then show that a population of cells with primitive streak characteristics localise in regions of high curvature and low cell density. Finally, we show that this patterning did not depend on self-organised gradients of morphogen activity but instead could be attributed to positional rearrangements. Our findings unveil a novel role for tissue geometry in guiding the self-patterning of primitive streak cells and provide a framework to further refine our understanding of symmetry breaking events occuring in ESC aggregates. Finally, this work demonstrates that the self-patterning of a specific population of ESC, Brachyury positive cells in this case, can be directed by providing engineered external geometrical cues.

Alginate is commonly used in the form of hydrogels in biomedical applications. It is known to be highly sensitive to liquid exposure and can degrade or solubilize easily. This study attempts to improve the mechanical and material properties in various humidity conditions and in liquid immersion of thin alginate films with the addition of unmodified and oxidized cellulose nanocrystals (CNCs, CNC-Ts). CNCs and CNC-Ts were added to alginate composites in varying amounts, and the material and mechanical properties were measured in dry, humid, and liquid conditions. It was shown that the properties can be enhanced with the addition of nanocellulose as tested by liquid uptake, and mechanical testing. These results suggest that the addition of TEMPO-oxidized nanocellulose crystals improves the performance and longevity of alginate when exposed to phosphate buffer solution (PBS) compared to deionized water. This improved performance was shown to have a limited effect on the adhesion of mesenchymal stem cells (MSCs) to the surface of the nanocomposites.

Background Satellite cells are quiescent resident muscle stem cells that present an important potential to regenerate damaged tissue. However, this potential is diminished once they are removed from their niche environment in vivo, prohibiting the long-term study and genetic investigation of these cells. This study therefore aimed to provide a novel biomaterial platform for the in-vitro culture of human satellite cells that maintains their stem-like quiescent state, an important step for cell therapeutic studies. Methods Human muscle satellite cells were isolated from two donors and cultured on soft biopolymeric films of controlled stiffness. Cell adhesive phenotype, maintenance of satellite cell quiescence and capacity for gene manipulation were investigated using FACS, western blotting, fluorescence microscopy and electron microscopy. Results About 85% of satellite cells cultured in vitro on soft biopolymer films for 3 days maintained expression of the quiescence marker Pax7, as compared with 60% on stiffer films and 50% on tissue culture plastic. The soft biopolymeric films allowed satellite cell culture for up to 6 days without renewing the media. These cells retained their stem-like properties, as evidenced by the expression of stem cell markers and reduced expression of differentiated markers. In addition, 95% of cells grown on these soft biopolymeric films were in the G0/G1 stage of the cell cycle, as opposed to those grown on plastic that became activated and began to proliferate and differentiate. Conclusions Our study identifies a new biomaterial made of a biopolymer thin film for the maintenance of the quiescence state of muscle satellite cells. These cells could be activated at any point simply by replating them onto a plastic culture dish. Furthermore, these cells could be genetically manipulated by viral transduction, showing that this biomaterial may be further used for therapeutic strategies. Electronic supplementary material The online version of this article (doi:10.1186/s13287-017-0556-8) contains supplementary material, which is available to authorized users.

International audience; The SDF-1α chemokine (CXCL12) is a potent bioactive chemoattractant known to be involved in hematopoietic stem cell homing and cancer progression. The associated SDF-1α/CXCR4 receptor signaling is a hallmark of aggressive tumors, which can metastasize to distant sites such as lymph nodes, lung and bone. Here, we engineered a biomimetic tumoral niche made of a thin and soft polyelectrolyte film that can retain SDF-1α to present it, in a spatially-controlled manner, at the ventral side of the breast cancer cells. Matrix-bound SDF-1α but not soluble SDF-1α induced a striking increase in cell spreading and migration in a serum-containing medium, which was associated with the formation of lamellipodia and filopodia in MDA-MB231 cells and specifically mediated by CXCR4. Other Knockdown and inhibition experiments revealed that CD44, the major hyaluronan receptor, acted in concert, via a spatial coincidence, to drive a specific matrix-bound SDFα-induced cell response associated with ERK signaling. In contrast, the β1 integrin adhesion receptor played only a minor role on cell polarity. The CXCR4/CD44 mediated cellular response to matrix-bound SDF-1α involved the Rac1 RhoGTPase and was sustained solely in the presence of matrix-bound SDFα, in contrast with the transient signaling observed in response to soluble SDF-1α. Our results highlight that a biomimetic tumoral niche enables to reveal potent cellular effects and so far hidden molecular mechanisms underlying the breast cancer response to chemokines. These results open new insights for the design of future innovative therapies in metastatic cancers, by inhibiting CXCR4-mediated signaling in the tumoral niche via dual targeting of receptors (CXCR4 and CD44) or of associated signaling molecules (CXCR4 and Rac1).

International audience; Thin cellulose nanofiber (CNF) nanostructured substrates with varying roughness, stiffness (Young’s modulus), porosity, and swelling properties were produced by varying the conditions used during fabrication. It was shown that with increased heat exposure, CNF substrate porosity in an aqueous state decreased while Young’s modulus in a water submerged state increased. In this study, the adhesion and viability of mesenchymal stem cells (MSCs) cultured on this CNF substrate will be presented. Viability of D1/BALBc MSCs were assessed for 24 and 48 h, and it was shown that depending on the CNF substrate the viability varied significantly. The adhesion of MSCs after 6 and 24 h was conditional on material mechanical properties and porosity of the CNF in cell culture conditions. These results suggest that material properties of CNF nanostructured substrate within the aqueous state can be easily tuned with curing step without any chemical modification to the CNF and that these changes can affect MSC viability in cell culture.

International audience; Large and load-bearing bone defects are challenging to treat and cause pain and disfigurement. The design of efficacious bone scaffolds for the repair of such defects involves a range of length scales from the centimeter down to the micrometer-scale. Here, we assess the influence on bone regeneration of scaffold rod spacing (>300 μm) and microporosity (

International audience; Several chemokines are important in muscle myogenesis and in the recruitment of muscle precursors during muscle regeneration. Among these, the SDF-1α chemokine (CXCL12) is a potent chemoattractant known to be involved in muscle repair. SDF-1α was loaded in polyelectrolyte multilayer films made of poly(L-lysine) and hyaluronan to be delivered locally to myoblast cells in a matrix-bound manner. The adsorbed amounts of SDF-1α were tuned over a large range from 100 ng/cm(2) to 5 μg/cm(2), depending on the initial concentration of SDF-1α in solution, its pH, and on the film crosslinking extent. Matrix-bound SDF-1α induced a striking increase in myoblast spreading, which was revealed when it was delivered from weakly crosslinked films. It also significantly enhanced cell migration in a dose-dependent manner, which again depended on its presentation by the biopolymeric film. The low-crosslinked film was the most efficient in boosting cell migration. Furthermore, matrix-bound SDF-1α also increased the expression of myogenic markers but the fusion index decreased in a dose-dependent manner with the adsorbed amount of SDF-1α. At high adsorbed amounts of SDF-1α, a large number of Troponin T-positive cells had only one nucleus. Overall, this work reveals the importance of the presentation mode of SDF-1α to emphasize its effect on myogenic processes. These films may be further used to provide insight into the role of SDF-1α presented by a biomaterial in physiological or pathological processes.

International audience; The chemokine CXCL12α is a potent chemoattractant that guides the migration of muscle precursor cells (myoblasts) during myogenesis and muscle regeneration. To study how the molecular presentation of chemokines influences myoblast adhesion and motility, we designed multifunctional biomimetic surfaces as a tuneable signalling platform that enabled the response of myoblasts to selected extracellular cues to be studied in a well-defined environment. Using this platform, we demonstrate that CXCL12α, when presented by its natural extracellular matrix ligand heparan sulfate (HS), enables the adhesion and spreading of myoblasts and facilitates their active migration. In contrast, myoblasts also adhered and spread on CXCL12α that was quasi-irreversibly surface-bound in the absence of HS, but were essentially immotile. Moreover, co-presentation of the cyclic RGD peptide as integrin ligand along with HS-bound CXCL12α led to enhanced spreading and motility, in a way that indicates cooperation between CXCR4 (the CXCL12α receptor) and integrins (the RGD receptors). Our findings reveal the critical role of HS in CXCL12α induced myoblast adhesion and migration. The biomimetic surfaces developed here hold promise for mechanistic studies of cellular responses to different presentations of biomolecules. They may be broadly applicable for dissecting the signalling pathways underlying receptor cross-talks, and thus may guide the development of novel biomaterials that promote highly specific cellular responses.

Le volume 27 de la revue Réseaux « Les usages avancés du téléphone mobile » aborde la question de la transformation des terminaux portables et de leurs usages. Il regroupe des études menées entre 2007 à 2009, dans le cadre d’un projet collaboratif « Mobile en ville » labellisé par le pôle de compétitivité Cap Digital. Il est constitué de six articles qui interrogent les nouvelles pratiques individuelles et collectives de la téléphonie mobile. Ils questionnent la façon dont s’articulent les no...

The control over the adsorption or grafting of biomolecules from a liquid to a solid interface is of fundamental importance in different fields, such as drug delivery, pharmaceutics, diagnostics, and tissue engineering. It is thus important to understand and characterize how biomolecules interact with surfaces and to quantitatively measure parameters such as adsorbed amount, kinetics of adsorption and desorption, conformation of the adsorbed biomolecules, orientation, and aggregation state. A better understanding of these interfacial phenomena will help optimize the engineering of biofunctional surfaces, preserving the activity of biomolecules and avoiding unwanted side effects. The characterization of molecular adsorption on a solid surface requires the use of analytical techniques, which are able to detect very low quantities of material in a liquid environment without modifying the adsorption process during acquisition. In general, the combination of different techniques will give a more complete characterization of the layers adsorbed onto a substrate. In this review, the authors will introduce the context, then the different factors influencing the adsorption of biomolecules, as well as relevant parameters that characterize their adsorption. They review surface-sensitive techniques which are able to describe different properties of proteins and polymeric films on solid two-dimensional materials and compare these techniques in terms of sensitivity, penetration depth, ease of use, and ability to perform "parallel measurements."

A novel type of biocompatible hollow capsules that combine severable favorable features as a hydrophobic drug carrier, including host–guest complexation in the shell, the unique biological functions of hyaluronic acid (HA), and transport properties of the multilayer shell, was designed and prepared. These capsules were generated by layer-by-layer (LbL) deposition of HA modified with β-cyclodextrin (CD) molecules and poly(l-lysine) (PLL) on calcium carbonate particles. Simultaneously, paclitaxel (PTX) was loaded in the LbL wall via host–guest interaction. Under physiological conditions, the incorporated anticancer drug was slowly released, and the capsules remained stable. Because the PTX molecules are selectively complexed by CD in the shell, their release can be triggered by the addition of competitive cyclodextrin molecules in the external medium. By incubating the capsules with breast cancer cells (MDA-MB-231), it was found that the cells bound specifically to the capsules through the CD44 receptor of ...

International audience; Immobilization of bone morphogenetic proteins (BMP) onto material surfaces is a promising, but still challenging, strategy for achieving dependable and consistent osseointegration of long-term metal implants. In the present study, we have developed an osteoinductive coating of a porous titanium implant using biomimetic polyelectrolyte multilayer (PEM) films loaded with BMP-2. The amount of BMP-2 loaded in these films was tuned over a large range depending on the cross-linking extent of the film and of the BMP-2 initial concentration. The air-dried PEM films were stable for at least one year of storage at 4 degrees C. In addition, they resisted exposure to gamma-irradiation at clinically approved doses. The preservation of the growth factor bioactivity upon long-term storage and sterilization were evaluated both in vitro (using C2C12 cells) and in vivo (in a rat ectopic model) for the perspective of industrial and clinical development. BMP-2 loaded in dried PEM films exhibited shelf-life stability over one year. However, their bioactivity in vitro decreased from 50 to 80% after irradiation depending on the gamma-irradiation dose. Remarkably, the in vivo studies showed that the osteoinductive potential of BMP-2 contained in PEM-coated Ti implants was fully preserved after air-drying of the implants and sterilization at 25 kGy. Film drying or irradiation did not affect the amount of new bone tissue formation. This "off-the-shelf" novel technology of functionalized implants opens promising applications in prosthetic and tissue engineering fields. 2013 Elsevier Ltd. All rights reserved.

International audience; Photo-cross-linkable polyelectrolyte films, whose nanomechanical properties can be varied under UV light illumination, were prepared from poly(L-lysine) (PLL) and a hyaluronan derivative modified with photoreactive vinylbenzyl groups (HAVB). The adhesion and the growth of two model bacteria, namely Escherichia coli and Lactococcus lactis, were studied on non-cross-linked and cross-linked films to investigate how the film stiffness influences the bacterial behavior. While the Gram positive L. lactis was shown to grow slowly on both films, independently of their rigidity, the Gram negative E. coli exhibited a more rapid growth on non-cross-linked softer films compared to the stiffer ones. Experiments performed on photopatterned films showing both soft and stiff regions, confirmed a faster development of E. coli colonies on softer regions. Interestingly, this behavior is opposite to the one reported before for mammalian cells. Therefore, the photo-crosslinked (PLL/HAVB) films are interesting coatings for tissue engineering since they promote the growth of mammalian cells while limiting the bacterial colonization.

International audience; Surface coatings delivering BMP are a promising approach to render biomaterials osteoinductive. In contrast to soluble BMPs which can interact with their receptors at the dorsal side of the cell, BMPs presented as an insoluble cue physically bound to a biomimetic matrix, called here matrix-bound (bBMP-2), are presented to cells by their ventral side. To date, BMP-2 internalization and signaling studies in cell biology have always been performed by adding soluble (sBMP-2) to cells adhered on cell culture plates or glass slides, which will be considered here as a "reference" condition. However, whether and how matrix-bound BMP-2 can be internalized by cells and its relation to canonical (SMAD) and non canonical signaling (ALP) remain open questions. In this study, we investigated the uptake and processing of BMP-2 by C2C12 myoblasts. This BMP-2 was presented either embedded in polyelectrolyte multilayer films (matrix-bound presentation) or as soluble form. Using fluorescently labeled BMP-2, we showed that the amount of matrix-bound BMP-2 internalized is dependent on the level of crosslinking of the polyelectrolyte films. Cav-1-mediated internalization is related to both SMAD and ALP signaling, while clathrin-mediated is only related to ALP signaling. BMP-2 internalization was independent of the presentation mode (sBMP-2 versus bBMP-2) for low crosslinked films (soft, EDC10) in striking contrast with high crosslinked (stiff, EDC70) films where internalization was much lower and slower for bBMP-2. As anticipated, internalization of sBMP-2 barely depended on the underlying matrix. Taken together, these results indicate that BMP-2 internalization can be tuned by the underlying matrix and activates downstream BMP-2 signaling, which is key for the effective formation of bone tissue. Statement of Significance The presentation of growth factors from material surfaces currently presents significant challenges in academic research, clinics and industry. Being able to deliver efficiently these growth factors by a biomaterial will open new perspectives for regenerative medicine. However, to date, very little is known about how matrix-bound growth factors are delivered to cells, especially whether they are internalized and how they are signaling to drive key differentiation events. These initial steps are crucial as they will guide the subsequent processes leading to tissue regeneration. In this work, we investigate the uptake and processing by cells of BMP-2 ligands embedded in polyelectrolyte multilayer films in comparison to soluble BMP-2. We show that BMP-2 responsive cells can internalize matrix-bound BMP-2 and that internalization is dependent on the cross-linking level of the polyelectrolyte films. In addition, we show that internalization is mediated by both clathrin- and caveolin-dependent pathways. While inhibiting clathrin-dependent endocytosis affects only non-canonical signaling, blocking caveolin-1-dependent endocytosis reduces both canonical and non-canonical BMP signaling. The signaling pathways found for matrix-bound BMP-2 are similar to those found for soluble BMP-2. These results highlight that BMP-2 presented by a biomaterial at the ventral side of the cell can trigger major endocytic and associated signaling pathways leading to bone regeneration. (C) 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

The self-assembly of HIV-1 Gag polyprotein at the inner leaflet of the cell host plasma membrane is the key orchestrator of virus assembly. The binding between Gag and the plasma membrane is mediated by specific interaction of the Gag matrix domain and the PI(4,5)P2 lipid (PIP2). It is unknown whether this interaction could lead to local reorganization of the plasma membrane lipids. In this study, using model membranes, we examined the ability of Gag to segregate specific lipids upon self-assembly. We show for the first time that Gag self-assembly is responsible for the formation of PIP2 lipid nanoclusters, enriched in cholesterol but not in sphingomyelin. We also show that Gag mainly partition into liquid-disordered domains of these lipid membranes. Our work strongly suggests that, instead of targeting pre-existing plasma membrane lipid domains, Gag is more prone to generate PIP2/Cholesterol lipid nanodomains at the inner leaflet of the plasma membrane during early events of virus assembly.

International audience; In this study, we used a recently developed approach of coating the cells with fibronectin-gelatin nanofilms to build 3D skeletal muscle tissue models. We constructed the microtissues from C2C12 myoblasts and subsequently differentiated them to form muscle-like tissue. The thickness of the constructs could be successfully controlled by altering the number of seeded cells. We were able to build up to ∼76 μm thick 3D constructs that formed multinucleated myotubes. We also found that Rho-kinase inhibitor Y27632 improved myotube formation in thick constructs. Our approach makes it possible to rapidly form 3D muscle tissues and is promising for the in vitro construction of physiologically relevant human skeletal muscle tissue models.