Search

Using different prebiotically plausible activating reagents, the RNA ligation yield was significantly increased in the presence of Mn(II). The mechanism of the activation reaction has been investigated using 5'-AMP as an analogue.

Owing to its high natural abundance compared to the commonly used transition (precious) metals, as well as its high Lewis acidity and ability to change oxidation state, aluminium has recently been explored as the basis for a range of single-site catalysts. This paper aims to establish the ground rules for the development of a new type of cationic alkene oligomerisation catalyst containing two Al(III) ions, with the potential to act co-operatively in stereoselective assembly. Five new dimers of the type [R 2 Al(2-py')] 2 (R=Me, i Bu; py'=substituted pyridyl group) with different substituents on the Al atoms and pyridyl rings have been synthesised. The formation of the undesired cis isomers can be suppressed by the presence of substituents on the 6-position of the pyridyl ring due to steric congestion, with DFT calculations showing that the selection of the trans isomer is thermodynamically controlled. Calculations show that demethylation of the dimers [Me 2 Al(2-py')] 2 with Ph 3 C + to the cations [{MeAl(2-py')} 2 (μ-Me)] + is highly favourable and that the desired trans disposition of the 2-pyridyl ring units is influenced by steric effects. Preliminary experimental studies confirm that demethylation of [Me 2 Al(6-MeO-2-py)] 2 can be achieved using [Ph 3 C][B(C 6 F 5 ) 4 ]., (© 2024 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Triphenylmethyl (trityl) radicals have shown potential for use in organic optoelectronic applications, but the design of practical trityl structures has been limited to donor/radical charge-transfer systems due to the poor luminescence of alternant symmetry hydrocarbons. Here, we circumvent the symmetry-forbidden transition of alternant hydrocarbons via excited-state symmetry breaking in a series of phenyl-substituted tris(2,4,6-trichlorophenyl)methyl (TTM) radicals. We show that 3-fold phenyl substitution enhances the emission of the TTM radical and that steric control modulates the optical properties in these systems. Simple ortho -methylphenyl substitution boosts the photoluminescence quantum efficiency from 1% (for TTM) to 65% at a peak wavelength of 612 nm (for 2-T 3 TTM) in solution. In the crystalline solid state, the neat 2-T 3 TTM radical shows a remarkably high photoluminescence quantum efficiency of 25% for emission peaking at 706 nm. This has implications in the design of aryl-substituted radical structures where the electronic coupling of the substituents influences variables such as emission, charge transfer, and spin interaction.

Hyperfluorescence shows great promise for the next generation of commercially feasible blue organic light-emitting diodes, for which eliminating the Dexter transfer to terminal emitter triplet states is key to efficiency and stability. Current devices rely on high-gap matrices to prevent Dexter transfer, which unfortunately leads to overly complex devices from a fabrication standpoint. Here we introduce a molecular design where ultranarrowband blue emitters are covalently encapsulated by insulating alkylene straps. Organic light-emitting diodes with simple emissive layers consisting of pristine thermally activated delayed fluorescence hosts doped with encapsulated terminal emitters exhibit negligible external quantum efficiency drops compared with non-doped devices, enabling a maximum external quantum efficiency of 21.5%. To explain the high efficiency in the absence of high-gap matrices, we turn to transient absorption spectroscopy. It is directly observed that Dexter transfer from a pristine thermally activated delayed fluorescence sensitizer host can be substantially reduced by an encapsulated terminal emitter, opening the door to highly efficient 'matrix-free' blue hyperfluorescence., (© 2024. The Author(s).)

Redox flow batteries (RFBs) rely on the development of cheap, highly soluble, and high-energy-density electrolytes. Several candidate quinones have already been investigated in the literature as two-electron anolytes or catholytes, benefiting from fast kinetics, high tunability, and low cost. Here, an investigation of nitrogen-rich fused heteroaromatic quinones was carried out to explore avenues for electrolyte development. These quinones were synthesized and screened by using electrochemical techniques. The most promising candidate, 4,8-dioxo-4,8-dihydrobenzo[1,2- d :4,5- d ']bis([1,2,3]triazole)-1,5-diide (-0.68 V(SHE)), was tested in both an asymmetric and symmetric full-cell setup resulting in capacity fade rates of 0.35% per cycle and 0.0124% per cycle, respectively. In situ ultraviolet-visible spectroscopy (UV-Vis), nuclear magnetic resonance (NMR), and electron paramagnetic resonance (EPR) spectroscopies were used to investigate the electrochemical stability of the charged species during operation. UV-Vis spectroscopy, supported by density functional theory (DFT) modeling, reaffirmed that the two-step charging mechanism observed during battery operation consisted of two, single-electron transfers. The radical concentration during battery operation and the degree of delocalization of the unpaired electron were quantified with NMR and EPR spectroscopy., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Heterometal-containing polyoxotitanates (POTs) are much-studied single-source precursors (SSPs) for doped TiO 2 . In this work the properties of a wide range of lanthanide-containing POTs are studied to assess their potential use as SSPs for Ln-Ti hybrid oxides. The novel cage compounds [{Ti 2 O(OEt) 8 }(EtOH·LnCl)] 2 (Ln = Sm, Gd, Tb, Dy, Ho, Tm and Yb) are structurally characterised. The magnetic properties of the Ln = Dy and Ho compounds were characterised using SQUID magnetometry-in both cases, there is evidence of significant uniaxial magnetic anisotropy, but magnetic relaxation is fast and therefore no single-molecule magnetic properties are observed. Upon decomposition lanthanide-doped anatase (Ln = La) or titania/LnTi-oxide mixtures are obtained, which show efficient stabilisation of the catalytically active anatase phase up to high temperatures, making the materials of potential interest for applications in photocatalysis.

The substitution of heavier, more metallic atoms into classical organic ligand frameworks provides an important strategy for tuning ligand properties, such as ligand bite and donor character, and is the basis for the emerging area of main-group supramolecular chemistry. In this paper, we explore two new ligands [E(2-Me-8-qy) 3 ] [E = Sb ( 1 ), Bi ( 2 ); qy = quinolyl], allowing a fundamental comparison of their coordination behavior with classical tris (2-pyridyl) ligands of the type [E'(2-py) 3 ] (E = a range of bridgehead atoms and groups, py = pyridyl). A range of new coordination modes to Cu + , Ag + , and Au + is seen for 1 and 2 , in the absence of steric constraints at the bridgehead and with their more remote N-donor atoms. A particular feature is the adaptive nature of these new ligands, with the ability to adjust coordination mode in response to the hard-soft character of coordinated metal ions, influenced also by the character of the bridgehead atom (Sb or Bi). These features can be seen in a comparison between [Cu 2 {Sb(2-Me-8-qy) 3 } 2 ](PF 6 ) 2 ( 1 ·CuPF 6 ) and [Cu{Bi(2-Me-8-qy) 3 }](PF 6 ) ( 2 ·CuPF 6 ), the first containing a dimeric cation in which 1 adopts an unprecedented intramolecular N , N ,Sb-coordination mode while in the second, 2 adopts an unusual N , N ,(π - ) C coordination mode. In contrast, the previously reported analogous ligands [E(6-Me-2-py) 3 ] (E = Sb, Bi; 2-py = 2-pyridyl) show a tris -chelating mode in their complexes with CuPF 6 , which is typical for the extensive tris (2-pyridyl) family with a range of metals. The greater polarity of the Bi-C bond in 2 results in ligand transfer reactions with Au(I). Although this reactivity is not in itself unusual, the characterization of several products by single-crystal X-ray diffraction provides snapshots of the ligand transfer reaction involved, with one of the products (the bimetallic complex [(BiCl){ClAu 2 (2-Me-8-qy) 3 }] ( 8 )) containing a Au 2 Bi core in which the shortest Au → Bi donor-acceptor bond to date is observed.

Single-source precursors are ubiquitous in a number of areas of chemistry and material science due to their ease of use and wide range of potential applications. The development of new single-source precursors is essential in providing entries to new areas of chemistry. In this work, we synthesize nine new structurally related bimetallic metal-zirconium alkoxides, which can be used as single-source precursors to zirconia-based materials. Detailed analysis of the structures of these complexes provides important insights into the main factors influencing their aggregation. Investigation of the thermal decomposition of these species by TGA, PXRD, SEM, and EDS reveals that they can be used to produce bimetal oxides, such as Li 2 ZrO 3 , or a mixture of metal oxides, such as CuO and ZrO 2 . Significantly, these studies show that thermodynamically unstable forms of zirconia, such as the tetragonal phase, can be stabilized by metal doping, providing the promise for targeted deposition of zirconia materials for specific applications.

4,5-Dicyanoimidazole and 2-aminothiazole are azoles that have previously been implicated in prebiotic nucleotide synthesis. The former compound is a byproduct of adenine synthesis, and the latter compound has been shown to be capable of separating C 2 and C 3 sugars via crystallization as their aminals. We now report that the elusive intermediate cyanoacetylene can be captured by 4,5-dicyanoimidazole and accumulated as the crystalline compound N- cyanovinyl-4,5-dicyanoimidazole, thus providing a solution to the problem of concentration of atmospherically formed cyanoacetylene. Importantly, this intermediate is a competent cyanoacetylene surrogate, reacting with ribo- aminooxazoline in formamide to give ribo- anhydrocytidine ─ an intermediate in the divergent synthesis of purine and pyrimidine nucleotides. We also report a prebiotically plausible synthesis of 2-aminothiazole and examine the mechanism of its formation. The utilization of each of these azoles enhances the prebiotic synthesis of ribonucleotides, while their syntheses comport with the cyanosulfidic scenario we have previously described.

Cooperative H-bonding interactions are a feature of supramolecular networks involving alcohols. A family of phenol oligomers, in which the hydroxyl groups form intramolecular H-bonds, was used to investigate this phenomenon. Chains of intramolecular H-bonds were characterized using nuclear magnetic resonance (NMR) spectroscopy in solution and X-ray crystallography in the solid state. The phenol oligomers were used to make quantitative measurements of the effects of the intramolecular interactions on the strengths of intermolecular H-bonding interactions between the H-bond donor on the end of the chain and a series of H-bond acceptors. Intramolecular H-bonding interactions in the chain increase the strength of a single intermolecular H-bond between the terminal phenol and quinuclidine by up to 14 kJ mol -1 in the n -octane solution. Although the magnitude of the effect increases with the length of the H-bonded chain, the first intramolecular H-bond has a much larger effect than subsequent interactions. H-bond cooperativity is dominated by pairwise interactions between nearest neighbors, and longer range effects are negligible. The results were used to develop a simple model for cooperativity in H-bond networks using an empirical parameter κ to quantify the sensitivity of the H-bond properties of a functional group to polarization. The value of κ measured in these systems was 0.33, which means that formation of the first H-bond increases the polarity of the next H-bond donor in the chain by 33%. The cumulative cooperative effect in longer H-bonded chains reaches an asymptotic value, which corresponds to a maximum increase in the polarity of the terminal H-bond donor of 50%.

Bicycles are constrained bicyclic peptides formed through reaction of three cysteine residues within a linear sequence with a trivalent, symmetrical small molecule scaffold. Bicycles with high binding affinities to therapeutically important targets can be discovered using screening technologies such as phage display. Increasing the chemical diversity of Bicycles should improve the probability of finding hits to new targets and can be achieved by expanding the toolbox of Bicycle forming chemistries. Gold(III) S-arylation has recently been described as a method for the efficient bioconjugation of cysteine residues under conditions compatible with phage display. Herein, we explore the scope and generality of this methodology for Bicycle construction through the synthesis and evaluation of four novel tris-Gold complexes. These new scaffolds were systematically reacted with a variety of peptide sequences, varying in amino acid loop lengths. All four scaffolds proved to be capable and selective reactive partners for each peptide sequence and afforded the desired Bicycle products in 13-48% isolated yield. This work exemplifies Gold-mediated arylation as a general approach for construction of novel, highly constrained Bicycles.

Sodium-ion batteries (SIBs) are a promising grid-level storage technology due to the abundance and low cost of sodium. The development of new electrolytes for SIBs is imperative since it impacts battery life and capacity. Currently, sodium hexafluorophosphate (NaPF 6 ) is used as the benchmark salt, but is highly hygroscopic and generates toxic HF. This work describes the synthesis of a series of sodium borate salts, with electrochemical studies revealing that Na[B(hfip) 4 ]⋅DME (hfip=hexafluoroisopropyloxy, O i Pr F ) and Na[B(pp) 2 ] (pp=perfluorinated pinacolato, O 2 C 2 (CF 3 ) 4 ) have excellent electrochemical performance. The [B(pp) 2 ] - anion also exhibits a high tolerance to air and water. Both electrolytes give more stable electrode-electrolyte interfaces than conventionally used NaPF 6 , as demonstrated by impedance spectroscopy and cyclic voltammetry. Furthermore, they give greater cycling stability and comparable capacity to NaPF 6 for SIBs, as shown in commercial pouch cells., (© 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

The Δp K a rule is commonly applied by chemists and crystal engineers as a guideline for the rational design of molecular salts and co-crystals. For multi-component crystals containing acid and base constituents, empirical evidence has shown that Δp K a > 4 almost always leads to salts, Δp K a < -1 almost always leads to co-crystals and Δp K a between -1 and 4 can be either. This paper reviews the theoretical background of the Δp K a rule and highlights the crucial role of solvation in determining the outcome of the potential proton transfer from acid to base. New data on the frequency of the occurrence of co-crystals and salts in multi-component crystal structures containing acid and base constituents show that the relationship between Δp K a and the frequency of salt/co-crystal formation is influenced by the composition of the crystal. For unsolvated co-crystals/salts, containing only the principal acid and base components, the point of 50% probability for salt/co-crystal formation occurs at Δp K a ≈ 1.4, while for hydrates of co-crystals and salts, this point is shifted to Δp K a ≈ -0.5. For acid-base crystals with the possibility for two proton transfers, the overall frequency of occurrence of any salt (monovalent or divalent) versus a co-crystal is comparable to that of the whole data set, but the point of 50% probability for observing a monovalent salt vs. a divalent salt lies at Δp K a,II ≈ -4.5. Hence, where two proton transfers are possible, the balance is between co-crystals and divalent salts, with monovalent salts being far less common. Finally, the overall role played by the "crystal" solvation is illustrated by the fact that acid-base complexes in the intermediate region of Δp K a tip towards salt formation if ancillary hydrogen bonds can exist. Thus, the solvation strength of the lattice plays a key role in the stabilisation of the ions.

Protein conjugates are valuable tools for studying biological processes or producing therapeutics, such as antibody-drug conjugates. Despite the development of several protein conjugation strategies in recent years, the ability to modify one specific amino acid residue on a protein in the presence of other reactive side chains remains a challenge. We show that monosubstituted cyclopropenone (CPO) reagents react selectively with the 1,2-aminothiol groups of N-terminal cysteine residues to give a stable 1,4-thiazepan-5-one linkage under mild, biocompatible conditions. The CPO-based reagents, all accessible from a common activated ester CPO-pentafluorophenol ( CPO-PFP ), allow selective modification of N-terminal cysteine-containing peptides and proteins even in the presence of internal, solvent-exposed cysteine residues. This approach enabled the preparation of a dual protein conjugate of 2 × cys-GFP , containing both internal and N-terminal cysteine residues, by first modifying the N-terminal residue with a CPO-based reagent followed by modification of the internal cysteine with a traditional cysteine-modifying reagent. CPO-based reagents enabled a copper-free click reaction between two proteins, producing a dimer of a de novo protein mimic of IL2 that binds to the β-IL2 receptor with low nanomolar affinity. Importantly, the reagents are compatible with the common reducing agent dithiothreitol (DTT), a useful property for working with proteins prone to dimerization. Finally, quantum mechanical calculations uncover the origin of selectivity for CPO-based reagents for N-terminal cysteine residues. The ability to distinguish and specifically target N-terminal cysteine residues on proteins facilitates the construction of elaborate multilabeled bioconjugates with minimal protein engineering.

Terahertz time-domain spectroscopy in a transmission geometry combined with visual analysis was used to investigate the crystallization process of MgSO 4 solution. Careful spectral analysis of both a feature at 1.6 THz and the overall magnitude of absorption allowed the extraction of information about the liquid phase before and during crystallization, aiding the investigation of solvation dynamics and the behavior of molecular species at phase boundaries. The method was reproducibly applied to a number of measurements on a series of solutions of three chosen concentrations at different temperatures. When increasing temperature at the end of the measurement, the dissolution of crystals was observed as well. The temperature-dependent absorption data of the semicrystalline systems were converted to the solvent concentrations using a recently developed method. Solutions of a series of concentrations were also investigated in the temperature range of 4-25 °C. The results were compared to the theoretical calculated values, and the consistent differences proved the existence of a hydration shell around the salt ions whose behavior is different from bulk water. Future work will focus on triggering nucleation at specific positions in order to study the very beginning of the crystallization process. MgSO 4 heptahydrate is used as a model system in this study, while the concept and the setup can be applied to other systems., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Methods for measuring enantiomeric excess ( ee ) of organic molecules by NMR spectroscopy provide rapid analysis using a standard technique that is readily available. Commonly this is accomplished by chiral derivatisation of the detector molecule (producing a chiral derivatisation agent, CDA), which is reacted with the mixture of enantiomers under investigation. However, these CDAs have almost exclusively been based on carbon frameworks, which are generally costly and/or difficult to prepare. In this work, a methodology based on the readily prepared inorganic cyclodiphosph(iii)azane CDA ClP(μ-N t Bu) 2 POBorn (Born = endo -(1 S )-1,7,7-trimethylbicyclo[2.2.1]heptan-2-yl) is shown to be highly effective in the measurement of ee 's of chiral amines, involving in situ reaction of the chiral amines (R*NH 2 ) with the P-Cl bond of the CDA followed by quaternization of the phosphorus framework with methyl iodide. This results in sharp 31 P NMR signals with distinct chemical shift differences between the diastereomers that are formed, which can be used to obtain the ee directly by integration. Spectroscopic, X-ray structural and DFT studies suggest that the NMR chemical shift differences between diastereomers is steric in origin, with the sharpness of these signals resulting from conformational locking of the bornyl group relative to the P 2 N 2 ring induced by the presence of the P(v)-bonded amino group (R*NH). This study showcases cheap inorganic phosphazane CDAs as simple alternatives to organic variants for the rapid determination of ee ., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The fabrication of mixed-metal oxide films holds promise for the development of practical photoelectrochemical catalyst coatings but currently presents challenges in terms of homogeneity, cost, and scalability. We report a straightforward and versatile approach to produce catalytically active zirconium-based films for electrochemical and photoelectrochemical water oxidation. The mixed-metal oxide catalyst films are derived from novel single-source precursor oxide cage compounds containing Zr with first-row transition metals such as Co, Fe, and Cu. The Zr-based film doped with Co on fluorine-doped tin oxide (FTO)-coated glass exhibits the highest electrocatalytic O 2 evolution performance in an alkaline medium and an operational stability above 18 h. The deposition of this film onto a BiVO 4 photoanode significantly enhances its photoelectrochemical activity toward solar water oxidation, lowering the onset potential by 0.12-0.21 V vs reversible hydrogen electrode (RHE) and improving the maximum photocurrent density by ∼50% to 2.41 mA cm -2 for the CoZr-coated BiVO 4 photoanodes compared to that for bare BiVO 4 .

Terahertz time-domain spectroscopy (THz-TDS) is applied to two polymorphs of acetylsalicylic acid (aspirin), and the experimental spectra are compared to lattice dynamical calculations using high accuracy density functional theory. The calculations confirm that forms I and II have very close energetic and thermodynamic properties and also that they show similar spectral features in the far-infrared region, reflecting the high degree of similarity in their crystal structures. Unique vibrational modes are identified for each polymorph which allow them to be distinguished using THz-TDS measurements. The observation of spectral features attributable to both polymorphic forms in a single sample, however, provides further evidence to support the hypothesis that crystalline aspirin typically comprises intergrown domains of forms I and II. Differences observed in the baseline of the measured THz-TDS spectra indicate a greater degree of structural disorder in the samples of form II. Calculated Gibbs free-energy curves show a turning point at 75 K, inferring that form II is expected to be more stable than form I above this temperature as a result of its greater vibrational entropy. The calculations do not account for any differences in configurational entropy that may arise from expected structural defects. Further computational work on these structures, such as ab initio molecular dynamics, would be very useful to further explore this perspective. Here, aspirin is a model system to show how the additional insight from the low-frequency vibrational information complements the structural data and allows for quantitative thermodynamic information of pharmaceutical polymorphs to be extracted. The methodology is directly applicable to other polymorphic systems.

A range of titanium compounds containing the naturally occurring dyes quinizarin (QH 2 ) and alizarin (AH 2 ) was synthesized and structurally characterized in the solid state. Among these is the first examples of a discrete metallocyclic arrangement formed exclusively using quinizarin ligands and the first examples of lanthanide containing titanium compounds of the alizarin family of ligands.

Conjugated polymers are an important class of chromophores for optoelectronic devices. Understanding and controlling their excited state properties, in particular, radiative and non-radiative recombination processes are among the greatest challenges that must be overcome. We report the synthesis and characterization of a molecularly encapsulated naphthalene diimide-based polymer, one of the most successfully used motifs, and explore its structural and optical properties. The molecular encapsulation enables a detailed understanding of the effect of interpolymer interactions. We reveal that the non-encapsulated analogue P(NDI-2OD-T) undergoes aggregation enhanced emission; an effect that is suppressed upon encapsulation due to an increasing π-interchain stacking distance. This suggests that decreasing π-stacking distances may be an attractive method to enhance the radiative properties of conjugated polymers in contrast to the current paradigm where it is viewed as a source of optical quenching., (© 2021 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

The effects of moving the donor N-atom from the 2-position in lithium (2-pyridyl)- and (2-quinolyl)aluminates to the more remote position in (8-quinolyl)aluminates have been investigated by solid-state structural and DFT computational studies of the new complexes [{EtAl(2-qy) 3 }Li(μ-X)Li(THF) 3 ] (X = Cl/Br 62 : 38) [(1)Li(μ-X)Li(THF) 3 ], [{(EtAl(2-qy) 3 )Li} 2 (μ-Br)] - Li(THF) 4 + [{1Li} 2 (μ-Br)] - Li(THF) 4 + , [{EtAl(2-Me-8-qy) 3 }Li] [(2)Li], [{Me 2 Al(2-Me-8-qy) 2 }Li(THF)] [(3a)Li(THF)], [{Me 2 Al(6-Me-2-py) 2 }Li(THF) 2 ] [(4)Li(THF) 2 ] and [{{EtAl(2-Me-8-qy) 2 } 2 O}(Li 2 THF)] (5). Increasing the remoteness of the donor N-atom from the bridgehead results in large differences in the coordination of the Li + cations by the (8-quinolyl)aluminate anions compared to 2-quinolyl or 2-pyridyl counterparts. The results are of potential interest in understanding how the coordination sites of ligands of this type can be tuned for the coordination requirements of specific metal centres.

Supramolecular main group chemistry is a developing field which parallels the conventional domain of metallo-organic chemistry. Little explored building blocks in this area are main group metal-based ligands which have the appropriate donor symmetry to build desired molecular or extended arrangements. Tris(pyridyl) main group ligands (E(py) 3 , E=main group metal) are potentially highly versatile building blocks since shifting the N-donor arms from the 2- to the 3-positions and 4-positions provides a very simple way of changing the ligand character from mononuclear/chelating to multidentate/metal-bridging. Here, the coordination behaviour of the first main group metal tris(4-pyridyl) ligands, E(4-py) 3 (E=Sb, Bi, Ph-Sn) is explored, as well as their ability to build metal-organic frameworks (MOFs). The complicated topology of these MOFs shows a marked influence on the counter anion and on the ability of the E(4-py) 3 ligands to switch coordination mode, depending on the steric and donor character of the bridgehead. This structure-directing influence of the bridgehead provides a potential building strategy for future molecular and MOF design in this area., (© 2021 Wiley-VCH GmbH.)

The last common ancestor of all living arthropods had biramous postantennal appendages, with an endopodite and exopodite branching off the limb base. Morphological evidence for homology of these rami between crustaceans and chelicerates has, however, been challenged by data from clonal composition and from knockout of leg patterning genes. Cambrian arthropod fossils have been cited as providing support for competing hypotheses about biramy but have shed little light on additional lateral outgrowths, known as exites. Here we draw on microtomographic imaging of the Cambrian great-appendage arthropod Leanchoilia to reveal a previously undetected exite at the base of most appendages, composed of overlapping lamellae. A morphologically similar, and we infer homologous, exite is documented in the same position in members of the trilobite-allied Artiopoda. This early Cambrian exite morphology supplements an emerging picture from gene expression that exites may have a deeper origin in arthropod phylogeny than has been appreciated., (© 2021. The Author(s).)

Oligomers equipped with complementary recognition units have the potential to encode and express chemical information in the same way as nucleic acids. The supramolecular assembly properties of m -phenylene ethynylene polymers equipped with H-bond donor ( D = phenol) and H-bond acceptor ( A = phosphine oxide) side chains have been investigated in chloroform solution. Polymerisation of a bifunctional monomer in the presence of a monofunctional chain stopper was used for the one pot synthesis of families of m -phenylene ethynylene polymers with sequences ADnA or DAnD ( n = 1-5), which were separated by chromatography. All of the oligomers self-associate due to intermolecular H-bonding interactions, but intramolecular folding of the monomeric single strands can be studied in dilute solution. NMR and fluorescence spectroscopy show that the 3-mers ADA and DAD do not fold, but there are intramolecular H-bonding interactions for all of the longer sequences. Nevertheless, 1 : 1 mixtures of sequence complementary oligomers all form stable duplexes. Duplex stability was quantified using DMSO denaturation experiments, which show that the association constant for duplex formation increases by an order of magnitude for every base-pairing interaction added to the chain, from 10 3 M -1 for ADA·DAD to 10 5 M -1 for ADDDA·DAAAD . Intramolecular folding is the major pathway that competes with duplex formation between recognition-encoded oligomers and limits the fidelity of sequence-selective assembly. The experimental approach described here provides a practical strategy for rapid evaluation of suitability for the development of programmable synthetic polymers., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Typical ranges of thermal expansion coefficients are established for organic molecular crystals in the Cambridge Structural Database. The CSD Python API is used to extract 6201 crystal structures determined close to room temperature and at least one lower temperature down to 90 K. The data set is dominated by structure families with only two temperature points and is subject to various sources of error, including incorrect temperature reporting and missing flags for variable-pressure studies. For structure families comprising four or more temperature points in the range 90-300 K, a linear relationship between unit-cell volume and temperature is shown to be a reasonable approximation. For a selected subset of 210 structures showing an optimal linear fit, the volumetric expansion coefficient at 298 K has mean 173 p.p.m. K -1 and standard deviation 47 p.p.m.  K -1 . The full set of 6201 structures shows a similar distribution, which is fitted by a normal distribution with mean 161 p.p.m. K -1 and standard deviation 51 p.p.m. K -1 , with excess population in the tails mainly comprising unreliable entries. The distribution of principal expansion coefficients, extracted under the assumption of a linear relationship between length and temperature, shows a positive skew and can be approximated by two half normal distributions centred on 33 p.p.m. K -1 with standard deviations 40 p.p.m. K -1 (lower side) and 56 p.p.m. K -1 (upper side). The distribution for the full structure set is comparable to that of the test subset, and the overall frequency of biaxial and uniaxial negative thermal expansion is estimated to be < 5% and ∼30%, respectively. A measure of the expansion anisotropy shows a positively skewed distribution, similar to the principal expansion coefficients themselves, and ranges based on suggested half normal distributions are shown to highlight literature cases of exceptional thermal expansion., (open access.)

Fluorescence in biological systems is usually associated with the presence of aromatic groups. Here, by employing a combined experimental and computational approach, we show that specific hydrogen bond networks can significantly affect fluorescence. In particular, we reveal that the single amino acid L-glutamine, by undergoing a chemical transformation leading to the formation of a short hydrogen bond, displays optical properties that are significantly enhanced compared with L-glutamine itself. Ab initio molecular dynamics simulations highlight that these short hydrogen bonds prevent the appearance of a conical intersection between the excited and the ground states and thereby significantly decrease nonradiative transition probabilities. Our findings open the door to the design of new photoactive materials with biophotonic applications., Competing Interests: The authors declare no competing interest., (Copyright © 2021 the Author(s). Published by PNAS.)

Tripodal ligands with main group bridghead units are well established in coordination chemistry and single-site organometallic catalysis. Although a large number of tris(2-pyridyl) main group ligands [E(2-py) 3 ] (E = main group element, 2-py = 2-pyridyl) spanning across the whole p-block are now synthetically acessible, only limited work has been done on the coordination chemistry on the tris(2-pyridyl) group 15 ligands for the heavier elements (As, Sb). In the current study we investigate the coordination chemistry of the ligand family E(6-Me-2-py) 3 (E = As, Sb) and of the As(v) ligand O[double bond, length as m-dash]As(6-Me-2-py) 3 . The air- and mositure-stability of all of these main group ligands makes them especially attractive in future catalytic applications.

Phosph(III)azanes, featuring the heterocyclobutane P 2 N 2 ring, have now been established as building blocks in main-group coordination and supramolecular compounds. Previous studies have largely involved their use as neutral P-donor ligands or as anionic N-donor ligands, derived from deprotonation of amido-phosphazanes [RNHP(μ-NR)] 2 . The use of neutral amido-phosphazanes themselves as chelating, H-bond donors in anion receptors has also been an area of recent interest because of the ease by which the proton acidity and anion binding constants can be modulated, by the incorporation of electron-withdrawing exo- and endo-cyclic groups (R) and by the coordination of transition metals to the ring P atoms. We observed recently that the effect of P,N-chelation of metal atoms to the P atoms of cis-[(2-py)NHP(μ-N t Bu)] 2 (2-py=2-pyridyl) not only pre-organises the N-H functionality for optimum H-bonding to anions but also results in a large increase in anion binding constants, well above those for traditional organic receptors like squaramides and ureas. Here, we report a broader investigation of ligand chemistry of [(2-py)NHP(μ- t NBu)] 2 (and of the new quinolyl derivative [(8-Qu)NHP(μ-N t Bu)] 2 (8-Qu=8-quinolyl). The additional N-donor functionality of the heterocyclic substituents and its position has a marked effect on the anion and metal coordination chemistry of both species, leading to novel structural behaviour and reactivity compared to unfunctionalized counterparts., (© 2020 Wiley-VCH GmbH.)

Prebiotically plausible ferrocyanide-ferricyanide photoredox cycling oxidatively converts thiourea to cyanamide, whilst HCN is reductively homologated to intermediates which either react directly with the cyanamide giving 2-aminoazoles, or have the potential to do so upon loss of HCN from the system. Thiourea itself is produced by heating ammonium thiocyanate, a product of the reaction of HCN and hydrogen sulfide under UV irradiation.

Molecular crystals are increasingly being used for advanced applications, ranging from pharmaceutics to organic electronics, with their utility dictated by a combination of their three-dimensional structures and molecular dynamics-with anharmonicity in the low-frequency vibrations crucial to numerous bulk phenomena. Through the use of temperature-dependent x-ray diffraction and terahertz time-domain spectroscopy, the structures and dynamics of a pair of isomeric molecular crystals exhibiting nearly free rotation of a CF&#95;{3} functional group at ambient conditions are fully characterized. Using a recently developed solid-state anharmonic vibrational correction, and applying it to a molecular crystal for the first time, the temperature-dependent spatial displacements of atoms along particular terahertz modes are obtained, and are found to be in excellent agreement with the experimental observations, including the assignment of a previously unexplained absorption feature in the low-frequency spectrum of one of the solids.

Six isostructural crystalline solvates of the active pharmaceutical ingredient celecoxib {4-[5-(4-methylphenyl)-3-(trifluoromethyl)pyrazol-1-yl]benzenesulfonamide; C 17 H 14 F 3 N 3 O 2 S} are described, containing dimethylformamide (DMF, C 3 H 7 NO, 1), dimethylacetamide (DMA, C 4 H 9 NO, 2), N-methylpyrrolidin-2-one (NMP, C 5 H 9 NO, 3), tetramethylurea (TMU, C 5 H 12 N 2 O, 4), 1,3-dimethyl-3,4,5,6-tetrahydropyrimidin-2(1H)-one (DMPU, C 6 H 12 N 2 O, 5) or dimethyl sulfoxide (DMSO, C 2 H 6 OS, 6). The host celecoxib structure contains one-dimensional channel voids accommodating the solvent molecules, which accept hydrogen bonds from the NH 2 groups of two celecoxib molecules. The solvent binding sites have local twofold rotation symmetry, which is consistent with the point symmetry of the solvent molecule in 4 and 5, but introduces orientational disorder for the solvent molecules in 1, 2, 3 and 6. Despite the isostructurality of 1-6, the unit-cell volume and solvent-accessible void space show significant variation. In particular, 4 and 5 show an enlarged and skewed unit cell, which can be attributed to a specific interaction between an N-CH 3 group in the solvent molecule and the toluene group of celecoxib. Intermolecular interaction energies calculated using the PIXEL method show that the total interaction energy between the celecoxib and solvent molecules is broadly correlated with the molecular volume of the solvent, except in 6, where the increased polarity of the S=O bond leads to greater overall stabilization compared to the similarly-sized DMF molecule in 1. In the structures showing disorder, the most stable orientations of the solvent molecules make C-H...O contacts to the S=O groups of celecoxib., (open access.)

Herein, we describe the development of a simple, high yielding and stereocontrolled strategy for the synthesis of a series of triazolopiperazines and other biologically relevant fused scaffolds from optically active amino acids. This route was applied to the synthesis of 22 scaffolds containing new, previously inaccessible vectors and used to access a novel analogue of ganaplacide.

The nature of the first genetic polymer is the subject of major debate 1 . Although the 'RNA world' theory suggests that RNA was the first replicable information carrier of the prebiotic era-that is, prior to the dawn of life 2,3 -other evidence implies that life may have started with a heterogeneous nucleic acid genetic system that included both RNA and DNA 4 . Such a theory streamlines the eventual 'genetic takeover' of homogeneous DNA from RNA as the principal information-storage molecule, but requires a selective abiotic synthesis of both RNA and DNA building blocks in the same local primordial geochemical scenario. Here we demonstrate a high-yielding, completely stereo-, regio- and furanosyl-selective prebiotic synthesis of the purine deoxyribonucleosides: deoxyadenosine and deoxyinosine. Our synthesis uses key intermediates in the prebiotic synthesis of the canonical pyrimidine ribonucleosides (cytidine and uridine), and we show that, once generated, the pyrimidines persist throughout the synthesis of the purine deoxyribonucleosides, leading to a mixture of deoxyadenosine, deoxyinosine, cytidine and uridine. These results support the notion that purine deoxyribonucleosides and pyrimidine ribonucleosides may have coexisted before the emergence of life 5 .

A series of new tris (2-pyridyl) bismuthine ligands of the type [Bi(2-py') 3 ] have been prepared, containing a range of substituents at various positions within their pyridyl rings (py'). They can act as intact ligands or, as a result of the low C-Bi bond energy, exhibit noninnocent reactivity in the presence of metal ions. Structural studies of Li + and Ag + complexes show that the coordination to metal ions using their pyridyl-N atoms and to anions using the Lewis acidity of their Bi(III) centers can be modified by the presence of substituents within the 2-pyridyl rings, especially at the 6- or 3-positions, which can block the donor-N or Lewis acid Bi sites. Electron withdrawing groups (like CF 3 or Br) can also severely reduce their ability to act as ligands to metal ions by reducing the electron donating ability of the pyridyl-N atoms. Noninnocent character is found in the reactions with Cu + and Cu 2+ , resulting in the coupling of pyridyl groups to form bipyridines, with the rate of this reaction being dependent on the anion present in the metal salts. This leads to the formation of Bi(III)/Cu(I) complexes containing hypervalent [X 2 Bi(2-R-py)] - (X = Cl, Br) anions. Alternatively, the tris (2-pyridyl) bismuthine ligands can act as 2-pyridyl transfer reagents, transferring 2-py groups to Au(I) and Fe(II).

A new polymorph (form II) is reported for the 1:1 dimethyl sulfoxide solvate of 2,3,5,6-tetrafluoro-1,4-diiodobenzene (TFDIB·DMSO or C 6 F 4 I 2 ·C 2 H 6 SO). The structure is similar to that of a previously reported polymorph (form I) [Britton (2003). Acta Cryst. E59, o1332-o1333], containing layers of TFDIB molecules with DMSO molecules between, accepting I...O halogen bonds from two TFDIB molecules. Re-examination of form I over the temperature range 300-120 K shows that it undergoes a phase transformation around 220 K, where the DMSO molecules undergo re-orientation and become ordered. The unit cell expands by ca 0.5 Å along the c axis and contracts by ca 1.0 Å along the a axis, and the space-group symmetry is reduced from Pnma to P2 1 2 1 2 1 . Refinement of form I against data collected at 220 K captures the (average) structure of the crystal prior to the phase transformation, with the DMSO molecules showing four distinct disorder components, corresponding to an overlay of the 297 and 120 K structures. Assessment of the intermolecular interaction energies using the PIXEL method indicates that the various orientations of the DMSO molecules have very similar total interaction energies with the molecules of the TFDIB framework. The phase transformation is driven by interactions between DMSO molecules, whereby re-orientation at lower temperature yields significantly closer and more stabilizing interactions between neighbouring DMSO molecules, which lock in an ordered arrangement along the shortened a axis., (open access.)

We report the structures of six new divalent transition metal hexathiocyanatobismuthate frameworks with the generic formula , M = Mn, Co, Ni and Zn. These frameworks are defective analogues of the perovskite-derived trivalent transition metal hexathiocyanatobismuthates M III [Bi(SCN) 6 ]. The defects in these new thiocyanate frameworks order and produce complex superstructures due to the low symmetry of the parent structure, in contrast to the related and more well-studied cyanide Prussian Blue analogues. Despite the close similarities in the chemistries of these four transition metal cations, we find that each framework contains a different mechanism for accommodating the lowered transition metal charge, making use of some combination of Bi(SCN) 6 3- vacancies, M Bi antisite defects, water substitution for thiocyanate, adventitious extra-framework cations and reduced metal coordination number. These materials provide an unusually clear view of defects in molecular framework materials and their variety suggests that similar richness may be waiting to be uncovered in other hybrid perovskite frameworks., Competing Interests: There are no conflicts of interest to declare., (This journal is © The Royal Society of Chemistry.)

Layered hybrid metal-halide perovskites with non-centrosymmetric crystal structure are predicted to show spin-selective band splitting from Rashba effects. Thus, fabrication of metal-halide perovskites with defined crystal symmetry is desired to control the spin-splitting in their electronic states. Here, we report the influence of halogen para -substituents on the crystal structure of benzylammonium lead iodide perovskites (4- X C 6 H 4 CH 2 NH 3 ) 2 PbI 4 ( X = H, F, Cl, Br). Using X-ray diffraction and second-harmonic generation, we study structure and symmetry of single-crystal and thin-film samples. We report that introduction of a halogen atom lowers the crystal symmetry such that the chlorine- and bromine-substituted structures are non-centrosymmetric. The differences can be attributed to the nature of the intermolecular interactions between the organic molecules. We calculate electronic band structures and find good control of Rashba splittings. Our results present a facile approach to tailor hybrid layered metal halide perovskites with potential for spintronic and nonlinear optical applications.

Coordination of Cu(i) or Pd(ii) to seleno-cyclodiphosph(v)azanes of the type [RNH(Se)P(μ-NtBu)]2 results in positively charged anion receptor units which have increased anion affinity over the neutral seleno-phosph(v)azanes, due to the increase in electrostatic interactions between the receptor and the guest anions. The same effect is produced by replacement of one of the P[double bond, length as m-dash]Se units by a P-Me+ unit.