Search

International audience; Electrochemical regeneration of the cofactor nicotinamide adenine dinucleotide (NADH) is crucial for the enzymatic synthesis of a variety of valuable chemicals. [Rh(Cp*)(bpy)Cl]+ has been reported as one of the most efficient non-enzymatic catalysts for electrochemical regeneration of NADH, but the efficiency of the existing systems is still far from satisfying. Here we propose to suspend metalorganic framework functionalized glassy carbon beads in a bipolar electrochemical cell under mechanical stirring for bulk electroenzymatic synthesis. The beads are modified with a metal-organic framework NU-1000 shell, in which [Rh(Cp*)(bpy)Cl]+ catalyst is incorporated via the solvent-assisted ligand incorporation approach. Enzymatically active 1,4-NADH is electrochemically regenerated, and finally bipolar electrochemical bulk conversion of pyruvate into L-lactate is performed in the presence of NADH dependent L-lactate dehydrogenase as a model system. The very high turnover frequency (TOF) of 3100±106 h-1 opens up promising perspectives for employing this concept also for various other electroenzymatic bulk processes.

Inserting complex biomolecules such as oligonucleotides during the synthesis of polymers remains an important challenge in the development of functionalized materials. In order to engineer such a biofunctionalized interface, a single-step method for the covalent immobilization of oligonucleotides (ONs) based on novel electropolymerizable lipid thiophene-oligonucleotide (L-ThON) conjugates was employed. Here, we report a new thiophene phosphoramidite building block for the synthesis of modified L-ThONs. The biofunctionalized material was obtained by direct electropolymerization of L-ThONs in the presence of 2,2'-bithiophene (BTh) to obtain a copolymer film on indium tin oxide electrodes.

International audience

International audience; Electrochemistry is taught in most undergraduate chemistry programs. Although this topic is important for students due to its broad interest in industry (energy, diagnostics, car industry, etc.), they often find it difficult, because it is based on a combination of various physical concepts such as electric fields, interfacial processes or charge and mass transports. Among electrochemical concepts, bipolar electrochemistry is of special interest and might be easier to teach due to a very simple general setup. In this case, an oxidation and a reduction reactions occur at the two ends of a single conductive object exposed to an electric field in solution. Such an object is therefore called a bipolar electrode. The nature of the electrochemical reactions and their amplitude can be tuned by playing with the electric field. The fundamental concepts of bipolar electrochemistry are introduced here with a series of basic experiments designed to be carried out in a standard teaching laboratory. These simple and affordable experiments illustrate the key-parameters driving electrochemical reactions at a bipolar electrode. Their influence can be readily visualized using a cheap, commercially available light emitting diode (LED) acting as the bipolar electrode, which illuminates when the current generated by the electrochemical reactions flows through it. The concept of bipolar electrochemistry with eye-catching experiments enables a good introduction to general

Microfluidic valves based on chemically responsive materials have gained considerable attention in recent years. Herein, a wireless enantio-responsive valve triggered by bipolar electrochemistry combined with chiral recognition is reported. A conducting polymer actuator functionalized with the enantiomers of an inherently chiral oligomer was used as bipolar valve to cover a tube loaded with a dye and immersed in a solution containing chiral analytes. When an electric field is applied, the designed actuator shows a reversible cantilever-type deflection, allowing the release of the dye from the reservoir. The tube can be opened and closed by simply switching the polarity of the system. Qualitative results show the successful release of the colorant, driven by chirality and redox reactions occurring at the bipolar valve. The device works well even in the presence of chemically different chiral analytes in the same solution. These systems open up new possibilities in the field of microfluidics, including also controlled drug delivery applications.

International audience; Chiral-imprinted mesoporous Pt-Ir alloy surfaces were combined in a synergetic way with electrochemiluminescence (ECL) to detect the two enantiomers of phenylalanine (PA) as a model compound, acting simultaneously as a chiral target and as a co-reactant to generate significant differences in ECL signals. The chiral features of the metal surfaces are converted into an enantioselective electrogeneration of the excited state of the [Ru(bpy)3]2+ dye, which in fine produces the differentiating light emission with up to 20-fold differences in intensity for the two enantiomers. These findings open up the possibility of developing new ECL-based bioassays and microscopy of chiral environments.

The sustainable conversion of biomass-derived compounds into high added-value products is a very important contemporary scientific challenge. In this context, we report here the simultaneous electro-oxidation/-reduction of a biomass-derived compound in a one-pot approach using bipolar electrochemistry. Bifunctional Pt/Au Janus electrocatalysts are employed for a selective conversion of furfural into both, furfuryl alcohol and furoic acid, which can't be achieved when using non-Janus particles. The results emphasize the benefits of bipolar electrochemistry in the frame of electrosynthesis processes.

International audience; Bipolar electrochemistry is a technique that involves two opposite chemical processes, namely an oxidation and a reduction, occurring simultaneously on the surface of a conducting object, usually without connection to a power supply. The basic phenomenon has already been described and used for many decades but regained a lot of interest in recent years, thanks to several attractive features for developing new applications in various areas ranging from materials science and analytical chemistry to catalysis and even life science. Consequently, bipolar electrochemistry has experienced a substantial growth in the number of users and publications. This is mostly due to several advantages over classic electrochemistry, such as the absence of an ohmic contact, the generation of a directional gradient of electroactivity on the object, and the possibility to address simultaneously thousands of objects, which opens the door for high throughput screening of (electro)chemical properties. Also, some features of this “wireless” electrochemistry allow performing experiments that cannot be achieved with a classic electrochemical set-up. Last but not least, only rather low-cost equipment is needed.The objective of the present contribution is to introduce first some fundamental aspects of bipolar electrochemistry, and then to illustrate its different developments, highlighting not only the historic landmark achievements, but also the most recent findings, especially in the context of micro- and nanoscience. The chapter will illustrate the singularities and advantages of this straightforward approach and hopefully convince the reader of the power of this interesting electrochemical concept.

In situ UV-vis-NIR spectroelectrochemistry has been intensively used to evaluate the electronic transitions during the charging/discharging process of π-conjugated polymers. However, the type of charge carrier and the mechanisms of their transport, remains still a point of discussion. Herein, the coupling between UV-vis-NIR spectroscopy and in situ electrochemical-conductance measurements is proposed to compare the doping process of three different thiophene-based conducting polymers. The simultaneous monitoring of electrical and absorption properties, associated with low energy electronic transitions characteristic for polarons and bipolarons, was achieved. In addition, this method allows evaluating the reversible charge trapping mechanism of poly-3,4-o-xylendioxythiophene (PXDOT), caused by the formation of σ-dimers, making it a very useful tool to determine relevant physicochemical properties of conductive materials.

Redox cycling (RC) is a powerful tool capable of amplifying faradaic currents in electroanalytical measurements, thus allowing an enhancement of sensitivity through fast multiple sequential oxidation and reduction reactions of a redox-active analyte. Present state-of-the-art RC devices are mostly based on planar electrode geometries either in 2D or 3D configurations, requiring cleanroom facilities and expensive microfabrication techniques. Here, the electrochemical elaboration and characterization of a 3D coaxial macroporous twin-electrode is reported, obtained by following a low-cost bottom-up approach. A nanoengineered highly organized porous material is the basis for the design of two threaded cylindrical porous gold microelectrodes with a gap in the micrometer range that can be fine-tuned. The potentials of the outer and inner electrodes are biased at values above and below the redox potential of the analyte so that a given molecule can participate several times in the electron exchange reaction by shuttling between both electrodes. The resulting signal amplification, combined with a straightforward synthesis strategy of the electrode architecture, allows envisioning numerous (bio)electroanalytical applications.

Electrochemical regeneration of the reduced form of the nicotinamide adenine dinucleotide (NADH) cofactor catalyzed by immobilized [Rh(Cp*)(bpy)Cl]

International audience; The development of chiral catalysts plays a very important role in various areas of chemical science. Heterogeneous catalysts have the general advantage of allowing a more straightforward separation from the products. One specific case of heterogeneous catalysis is electrocatalysis, being potentially a green chemistry approach. However, a typical drawback is that the redox conversion of molecules occurs only at the electrode/electrolyte interface, and not in the bulk of the electrolyte. The second limitation is that the electrodes have to be physically connected to a power supply to induce the desired reactions. To circumvent these problems, we propose here a complementary approach by replacing macroscopic electrodes with an ensemble of self-propelled redox active microswimmers. They move autonomously in solution while transforming simultaneously a prochiral starting compound into a specific enantiomer with a very high enantiomeric excess, accompanied by a significantly increased production rate of the favorite enantiomer.

International audience; Straightforward enantioselective analytical methods are very important for drug safety, considering that in certain cases one of the two enantiomers of a chiral molecule might be harmful for humans. In this work, we propose a simple system for the direct and easy read-out of the enantiomeric excess of 3,4-dihydroxyphenylalanine (DOPA) as a model analyte. A conducting oligomer, i.e. oligo-(3,3′-dibenzothiophene), bearing inherently chiral features, is electrogenerated on a polypyrrole film. The resulting freestanding hybrid material is used as a wireless enantioselective actuator in a bipolar electrochemical cell. Combining in a single setup two individual actuators with opposite chiral features allows a direct visual read-out of enantiomeric excess, as the bending amplitude of each of the two actuators is directly correlated with the concentration of the corresponding stereoisomer of the analyte. Optimization of the experimental parameters results in efficient bending, giving access to the percentage values of the enantiomeric excess in mixtures containing different ratios of the antipodes, thus opening the way to potential applications for chiral in situ analysis.

Spatial confinement of chemical reactions or physical effects may lead to original phenomena and new properties. Here, the generation of electrochemiluminescence (ECL) in confined free-standing 2D spaces, exemplified by surfactant-based air bubbles is reported. For this, the ultrathin walls of the bubbles (typically in the range of 100-700 nm) are chosen as a host where graphene sheets, acting as bipolar ECL-emitting electrodes, are trapped and dispersed. The proposed system demonstrates that the required potential for the generation of ECL is up to three orders of magnitude smaller compared to conventional systems, due to the nanoconfinement of the potential drop. This proof-of-concept study demonstrates the key advantages of a 2D environment, allowing a wireless activation of ECL at rather low potentials, compatible with (bio)analytical systems.

International audience; Actuators controlled by external stimuli have received a lot of attention in recent years. Herein we report a polymer based dual stimuli actuator, triggered by light and an electric field. This allows a better control of actuation, enlarging the field of potential applications, like e.g. in the frame of soft robotics. The actuator is composed of polypyrrole (PPy) and TiO2 modified with methylene blue (MB). In aqueous solution, the resulting freestanding hybrid film shows reversible actuation due to the synergy of light and an applied electric field. Illumination with light produces electron-hole pairs in the TiO2 layer, which are shuttled to the opposite ends of the actuator by the potential gradient present in solution. This results in electrochemical oxidation and reduction reactions at the two extremities and consequently in site selective swelling of the polymer, which finally leads to a controlled motion of the actuator, following the principles of logic gate operations. Such synergistically induced switching allows developing original actuation schemes for performing complex mechanical tasks triggered by more than one stimulus.