Search

As temperature and salt-resistant materials, hydrophobically associating polymers can form a reversible spatial network structure through the interaction between their hydrophobic groups, effectively improve the viscosity of the polymer solution through association, and enhance the temperature and salt resistance of the polymer. Hydrophobically associating monomers have different effects on the properties of polymer solutions. Herein, acrylic acid, acrylamide, and 2-acrylamido-2-methylpropanesulfonic acid were used as hydrophilic monomers. The three hydrophobic monomers with different carbon chain lengths were prepared by the bromination reaction. Hydrophobic associating polymers DQM1-PAM, DQM2-PAM, and DQM3-PAM were prepared by aqueous solution free-radical polymerization. The structure–activity relationship of the hydrophobic monomers with different carbon chain lengths on polymers was studied. It was confirmed by Fourier-transform infrared spectroscopy and 1H-NMR that the target product was successfully synthesized. Scanning electron microscopy revealed that with increasing hydrophobic carbon chain length, the hydrophobic microarea of molecular aggregation increased, forming a closer spatial network structure. Thermogravimetric and fluorescence tests revealed that with increasing hydrophobic carbon chain length of polymer molecules, the polymerization temperature resistance increased, intermolecular association degree increased, and critical association concentration decreased. Rheological property evaluation revealed that the viscosity of 0.5% polymer DQM1-PAM, DQM2-PAM, and DQM3-PAM was 71.32, 100.21, and 118.79 mPa·s after shearing at 120 °C and 170 s−1 for 1 h. With the increase in the carbon chain length, the retention rate of shear viscosity of polymer in a salt solution increased, showing good salt resistance. Concurrently, the molecular aggregation microarea of a solution with 0.5% polymer, degree of molecular chain action, viscoelasticity of the solution (G' > G''), and thixotropic area all increased. The performance of polymer solution can be improved by modifying hydrophobically associating polymers with long carbon chains, which has a broader application. [ABSTRACT FROM AUTHOR]

Transformation of methyl lactate to acrylic acid was investigated over Ca3(PO4)2, Ca2(P2O7) and their mixture in the temperature range of 250-425 °C. The initial concentration of methyl lactate in water was varied from 2 wt% to neat methyl lactate. The results showed that these phosphate catalysts did not contain any measurable amounts of either acid sites or basic sites. The best catalyst was Ca3(PO4)2 giving 62% selectivity to acrylic acid at 75% conversion at 400 °C using GHSV of 95280 h−1 and 2 wt% methyl lactate in the initial feed. This catalyst exhibited larger surface area in comparison to Ca2(P2O7). Elemental analysis revealed that some Ca leaching occurred during reaction, while in case of Ca2(P2O7) the calcium leaching was 3.4 fold higher than observed for Ca3(PO4)2. Long-term results over Ca3(PO4)2 showed that extensive catalyst deactivation occurred during the first 11 h time-on-stream, after which the activity dropped only slightly. In addition to kinetic studies with different parameters, also, kinetic modeling was performed and the activation energies for formation of different products were determined over different catalysts. [ABSTRACT FROM AUTHOR]

A new type of UV-curable pressure-sensitive adhesive containing Si atoms (Si-PSAs) was prepared by a solution-free UV-initiated telomerization process of n-butyl acrylate, acrylic acid, methyl methacrylate, and 4-acrylooxybenzophenone using triethylsilane (TES) as a telogen and an acylphosphine oxide (APO) as a radical photoinitiator. Selected commercial adhesion promoters were tested as additives in the formulation of adhesive compositions, i.e., (i) an organic copolymer with polar groups (carboxyl and hydroxyl); (ii) a hydroxymetal-organic compound; and (iii) a quaternary ammonium salt and (iv) a chlorinated polyolefin. No fillers, crosslinking agents, or photoinitiators were used in the adhesive compositions. NMR techniques confirmed the incorporation of silicon atoms into the polyacrylate structure. The influence of adhesion promoters on the kinetics of the UV-crosslinking process of Si-PSAs was investigated by a photo-DSC technique. The obtained Si-PSAs were characterized by adhesion (to steel, glass, PMMA, and PE), tack, and cohesion at 20 °C. Finally, the wetting angle of Si-PSAs with water was checked and their thermal stability was proved (TGA). Unexpectedly, the quaternary ammonium salt had the most favorable effect on improving the thermal stability of Si-PSAs (302 °C) and adhesion to glass and PMMA. In contrast, Si-PSAs containing the hydroxymetal-organic compound showed excellent adhesion to steel. [ABSTRACT FROM AUTHOR]

This study investigates the crosslinking dynamics and swelling properties of pH-responsive poly(ethylene glycol) (PEG)/poly(acrylic acid) (PAA) interpenetrating polymer network (IPN) hydrogels. These hydrogels feature denser crosslinked networks compared to PEG single network (SN) hydrogels. Fabrication involved a two-step UV curing process: First, forming PEG-SN hydrogels using poly(ethylene glycol) diacrylate (PEGDA) through UV-induced free radical polymerization and crosslinking reactions, then immersing them in PAA solutions with two different molar ratios of acrylic acid (AA) monomer and poly(ethylene glycol) dimethacrylate (PEGDMA) crosslinker. A subsequent UV curing step created PAA networks within the pre-fabricated PEG hydrogels. The incorporation of AA with ionizable functional groups imparted pH sensitivity to the hydrogels, allowing the swelling ratio to respond to environmental pH changes. Rheological analysis showed that PEG/PAA IPN hydrogels had a higher storage modulus (G′) than PEG-SN hydrogels, with PEG/PAA-IPN5 exhibiting the highest modulus. Thermal analysis via thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) indicated increased thermal stability for PEG/PAA-IPN5 compared to PEG/PAA-IPN1, due to higher crosslinking density from increased PEGDMA content. Consistent with the storage modulus trend, PEG/PAA-IPN hydrogels demonstrated superior mechanical properties compared to PEG-SN hydrogels. The tighter network structure led to reduced water uptake and a higher gel modulus in swollen IPN hydrogels, attributed to the increased density of active network strands. Below the pKa (4.3) of acrylic acid, hydrogen bonds between PEG and PAA chains caused the IPN hydrogels to contract. Above the pKa, ionization of PAA chains induced electrostatic repulsion and osmotic forces, increasing water absorption. Adjusting the crosslinking density of the PAA network enabled fine-tuning of the IPN hydrogels' properties, allowing comprehensive comparison of single network and IPN characteristics. [ABSTRACT FROM AUTHOR]

The indigo dye found in wastewater from printing and dyeing processes is potentially carcinogenic, teratogenic, and mutagenic, making it a serious threat to the health of animals, plants, and humans. Motivated by the growing need to remove indigo from wastewater, this study prepared novel fiber absorbents using melt-blow polypropylene (PP) melt as a matrix, as well as acrylic acid (AA) and maleic anhydride (MAH) as functional monomers. The modification conditions were studied to optimize the double-initiation, continuous-suspension grafting process, and then functional fibers were prepared by melt-blown spinning the modified PP. The results showed that the optimum modification conditions were as follows: a 3.5 wt% interfacial agent, 8 mg/L of dispersant, 80% monomer content, a 0.8 mass ratio of AA to MAH, a 1000 r/min stir speed, 3.5 wt% initiator DBPH grafting at 130 °C for 3 h, and 1 wt% initiator BPO grafting at 90 °C for 2 h. The highest grafting rate of the PP-g-AA-MAH was 31.2%, and the infrared spectrum and nuclear magnetic resonance spectroscopic analysis showed that AA and MAH were successfully grafted onto PP fiber. This modification strategy also made the fibers more hydrophilic. The adsorption capacity of the PP-g-AA-MAH fibers was highly dependent on pH, and the highest indigo adsorption capacity was 110.43 mg/g at pH 7. The fiber adsorption capacity for indigo increased rapidly before plateauing with increasing time or indigo concentration, and the experimental data were well described in a pseudo-second-order kinetic model and a Langmuir isothermal adsorption model. Most impressively, the modified fiber adsorption capacity for indigo remained as high as 91.22 mg/g after eight regeneration and reuse cycles. In summary, the PP-g-AA-MAH fibers, with excellent adsorption-desorption characteristics, could be readily regenerated and reused, and they are a promising material for the removal of indigo from wastewater. [ABSTRACT FROM AUTHOR]

The terpolymers of N-vinylpyrrolidone (VP) with acrylic acid and triethylene glycol methacrylate were synthesized with more than 90% yield by radical copolymerization in ethanol from monomeric mixtures of different molar composition (98:2:2, 95:5: 2 and 98:2:5) and their monomer composition, absolute molecular masses and hydrodynamic radii in aqueous media were determined. Using the MTT test, these terpolymers were established to be low toxic for non-tumor Vero cells and HeLa tumor cells. Polymer compositions of hydrophobic dye methyl pheophorbide a (MPP) based on studied terpolymers and linear polyvinylpyrrolidone (PVP) were obtained and characterized in water solution. Quantum-chemical modeling of the MPP-copolymer structures was conducted, and the possibility of hydrogen bond formation between terpolymer units and the MPP molecule was shown. Using fluorescence microscopy, the accumulation and distribution of polymer particles in non-tumor (FetMSC) and tumor (HeLa) cells was studied, and an increase in the accumulation of MPP with both types of particles was found. [ABSTRACT FROM AUTHOR]

K-doped MoVTeNbOx were prepared rapidly and simply by spray drying method and applied to catalyze the selective oxidation of propane to acrylic acid. Results show that doping of K could affect the relative content of M1 and M2 phases in MoVTeNbOx. The as-prepared K-doped MoVTeNbOx exhibited a unique spherical structure agglomerated by needle particles. These needles shaped particles interlaced and stacked with each other to form a mesoporous structure with an average pore size range of 27.26 to 50.78 nm. Moreover, compared with undoped catalysts, doping of K increased the surface V5+ active sites content of the MoVTeNbOx from 60 to 75%. For the conversion of propane to acrylic acid, an appropriate amount of M2 increased the conversion of propane. The selectivity of K-doped MoVTeNbOx catalyst for acrylic acid was significantly improved, possibly due to the distinct reduction in the number of medium acid sites caused by the introduction of K. Furthermore, the special mesoporous structure formed boosted the adsorption and activation of the catalyst for propane and the diffusion of product, which is important to improve the catalytic performance of MoVTeNbOx. Under the optimal reaction condition, the maximum selectivity and yield of K-doped catalyst (K/Mo = 0.005) for acrylic acid reached 72.06% and 49.57%, respectively. Mesoporous K-doped MoVTeNbOx catalyze the direct oxidation of propane to acrylic acid [ABSTRACT FROM AUTHOR]

The nitrilase enzymes are able to convert nitriles to their corresponding carboxylic acid. The present study reports the purification and characterisation of nitrilase (EC 3.5.5.1) which is able to convert acrylonitrile to acrylic acid and ammonia from Bacillus subtilis AGAB 2 (GenBank Ascension number- MW857547) in an optimized mineral medium. The purified nitrilase showed maximum enzyme activity of 5874.82 U ml−1 and, specific enzyme activity of 2097.92 U mg−1 with a 9.95-fold purification. The purified nitrilase showed high specificity for acrylonitrile (Vmax-344.82 µM s−1; Kcat-1603.84 s−1; Km-2.8 mM). The characterization showed that purified nitrilase is most stable and works best under the pH range of 7–8, and temperature range of 28 ºC—37 ºC temperature. The presence of heavy metal like—Co+2, Cu+2, Fe+2, Hg+2, Mg+2, Mn+2, Ni+2, Ca+2, Pb+2, Ba+2 and Zn+2 negatively affected the enzyme activity. Among the tested cosolvents (Methanol, Ethanol, Hexane, DMSO, IPA, Acetone, Ethyl Acetate, Benzene, Chloroform, and Butanol), only Methanol negatively affected nitrilase activity. Hydroxylamine competitively inhibited nitrilase against acrylonitrile, with an IC50 value of 5.5 mM. The biotransformation of acrylonitrile to acrylic acid achieved 95% yield with high purity and selectivity in 48 h, confirmed by HPLC and GCMS analysis. [ABSTRACT FROM AUTHOR]

The design of robotic soft matter capable of emulating the complex movements of living organisms such as mechanical actuation, shape transformation, and autonomous translation remains a grand challenge in soft materials science. Functionalized hydrogels are excellent candidates for such materials since they can operate in water and are highly responsive to their environment, but their response times can be slow. This work investigates fast photoactuation of hybrid bonding hydrogels composed of peptide amphiphile (PA) supramolecular nanofibers bonded covalently to merocyanine‐based (MCH+) photoresponsive networks. By incorporating ionizable acrylic acid (AA) co‐monomers in these networks, photoactuation at nearly neutral pH is observed, which in turn enables a new mechanism to accelerate the response by triggering the bundling of supramolecular nanofibers by rapid proton exchange reactions. Furthermore, this rapid response and its consequent large shape transformations lead to hydrogels capable of spontaneously tracking external light sources inspired by pedicellariae, defensive organs present in echinoderms like the starfish and the sea urchin. This work suggests that hybrid bonding polymers (HBPs), which leverage the interplay between supramolecular assemblies and covalent networks, offer novel strategies to design rapidly actuating soft robotic materials. [ABSTRACT FROM AUTHOR]

This study aimed to improve the anti‐fouling properties of a thin‐film composite polyamide membrane by modifying it with chitosan and acrylic acid using UV‐induced and Redox‐initiated graft polymerization methods. The modified membrane's separation performance was evaluated by measuring the flux and retention of sodium ions in water during filtration. The anti‐fouling capacities of the modified membranes were determined by measuring the maintained flux ratios and irreversible fouling factors during the 8‐h filtration of aqueous solutions of sodium chloride at different concentrations (1000 and 10,000 ppm). In addition, by evaluating the membrane's surface properties using various methods, including field emission scanning electron microscopy, attenuated total reflection – Fourier transform infrared spectroscopy, and water contact angle measurements, we have demonstrated the validity of the experimental results. Our results showed that the grafted membranes under UV irradiation or redox initiators had enhanced anti‐fouling properties while maintaining salt retention. The modified membranes fabricated by UV‐induced or Redox‐initiated technique had superior anti‐fouling capabilities, with irreversible fouling factors and maintained flux ratios of around 8% and 43%, respectively, after 8 h of filtration, compared to only 12% and 36% for the unmodified membrane. These findings suggest that the modified membranes have the potential for use in filtration systems to prevent the fouling phenomenon. [ABSTRACT FROM AUTHOR]

In this study, the electrocatalytic behavior of platinum (Pt) nanoparticles (NPs) in a novel multilayered thin film is investigated for proton exchange membrane fuel cells (PEMFC) applications. The multilayer thin films are assembled by the alternate deposition of branched polyethylenimine (BPEI) and poly(acrylic acid) (PAA) from aqueous solutions through a layer‐by‐layer (LbL) technique. Two extreme assembly pH conditions critically influence the films' physical and morphological characteristics, subsequently affecting their electrochemical behavior. Manipulation of the assembly pH modifies the charge density of the weak polyelectrolytes (BPEI and PAA), leading to variations in physical, structural, and electrochemical properties. The LbL thin films assembled at a pH of 9.5 for BPEI and 4.5 for PAA exhibit significantly greater thickness compared to the same film with all components deposited at pH 4.5. This is attributed to in‐and‐out diffusion of the partially charged polyelectrolytes with coiled polymeric conformation (BPEI at pH 9.5 and PAA at pH 4.5). As‐assembled LbL thin films are used as nanoreactors for the deposition of Pt NPs. The nanoscale control over polymeric conformation and charge density significantly influences electrocatalytic performance. 9.5BPEI/4.5PAA thin films exhibit higher electrocatalytic activity relative to 4.5BPEI/4.5PAA systems. This improved performance in 9.5BPEI/4.5PAA multilayers is ascribed to the fact that more carboxylic acid groups of PAA are coated in an exponentially grown behavior, which provides more active sites available for Pt NPs to be deposited. The multilayer thin films containing uniformly dispersed Pt NPs can be an attractive and advanced hybrid electrode material with great promise for the proton exchange membrane fuel cells. [ABSTRACT FROM AUTHOR]

To explore variation in the meat metabolites of two goat breeds, metabolomics analysis of the mutton samples of Jining Gray and Lubei White goat breeds was performed using mass spectrometry (LC-MS). The profile revealed a total of 2,599 metabolites in the mutton samples. The significantly higher (p < 0.05) metabolites included methionyl asparagine (p = 0.017), hydrocarbons, tryptophylhistidine, L-glutamine, D-glutamine, and indole acrylic acid in the longissimus dorsi muscle of Jining Gray goats compared to Lubei White goats. The essential amino acids, such as histidine, phenylalanine, and L-tyrosine were significantly higher in the mutton of the Lubei White goats compared to that of the Jining Gray goats. The contents of 2-hydroxycinnamic acid (p = 0.027) and nicotinamide (p = 0.002) in Lubei White goat were also significantly high. Taken together, the data showed that the meat profile of the Lubei White and Jining Gray goats significantly varied. The data would be helpful in further studying the meat traits in the two goat breeds. [ABSTRACT FROM AUTHOR]

A microwave technique was used to prepare a superabsorbent polymer (SAP) by grafting two hydrophilic monomers onto a polysaccharide substrate. The monomers used were acrylic acid (AA) or acrylamide (AM) and were grafted onto a pullulan (PUL) substrate to form PUL-g-AA (SAP1) and PUL-g-AM (SAP2), respectively. The monomers (AM/AA) were grafted together onto a PUL substrate to form PUL-g-(AM/AA) (SAP3). Grafting parameters such as grafting efficiency with the percentage, the conversion of monomer into polymer, gel content, water retention, water adsorption capacity, and swelling kinetics were determined. Additionally, the effect of environmental pH (2, 4, 7, 9, and 12) and sodium dodecylbenzene sulfonate (SDBS) surfactant was evaluated, where 1, 2, 3, 4, and 5 mM of SDBS was added to form SAP4 to SAP8. The FTIR results show that AM was grafted onto PUL through an aliphatic C-N bond, while AA grafting occurred through a single C-C bond. The grafting efficiency with AM was higher than with AA, as well as showing a superior gel content. Water absorbance capacity and water retention increased with the grafting of AA and AM together for SAP3. The highest absorbent capacity, water retention, gel content, and grafting parameters values were obtained with a 3 mM SDBS content and a pH of 7. The swelling kinetics showed that the increases in the theoretical and experimental swelling equilibriums were 72% and 82%, respectively, for SAP6 compared to the values of these parameters for SAP3. The water absorption capacity of the hydrogel increases upon increasing the pH to 7 and then gradually decreases. XRD demonstrated the improved crystallinity and crystalline size of the hydrogel after grafting polymerization of AM/AA onto PUL, in addition to enhanced thermal stability. On the contrary, FE-SEM demonstrated that SDBS improves the porosity and pore size of the hydrogel surface with SAP6. [ABSTRACT FROM AUTHOR]

Microplastic (MP) pollution has been observed in various ecosystems as a result of the rapid increase in plastic production over the past half-century. Nevertheless, the extent of MP pollution in different ecosystems, particularly in freshwater ecosystems, has not been well-studied, and there are limited investigations on this particular topic, specifically in Türkiye. Here, we quantify the occurrence and distribution of MPs in surface water samples collected from Topçu Pond (Türkiye) for the first time. Water samples were collected at five stations and filtered (30 L for each station) through stacked stainless steel sieves (5 mm, 328 µm, and 61 µm mesh size) with a diameter of 30 cm. The abundance, size, color, shape, and type of collected debris samples were analyzed after the wet peroxide oxidation process. MP particles were observed in all samples at an average abundance of 2.4 MPs/L. The most abundant MP size class and type were 0–999 µm and fiber respectively. On the other hand, prevalent colors were black and colorless in general. According to the Raman analysis results, the identified MP derivatives were polypropylene (40%), polyamide (30%), ethylene acrylic acid (20%), and polyvinylchloride (10%). Moreover, the pollution load index (PLI) index was used to determine the pollution status. PLI values were determined as 1.91 at station S1, 1.73 at station S2, 1.31 at station S3, 1 at station S4 and 1.24 at station S5. The PLI value determined for the overall pond was 1.4. The results of this research show that MP pollution is present in Topçu Pond and contributes to the expanding literature on MP pollution in pond ecosystems. [ABSTRACT FROM AUTHOR]

In this study, a viscosity-reducing polycarboxylic acid superplasticizer (VRPCE) was synthesized using methylallyl polyoxyethylene ether (HPEG), acrylic acid (AA), and maltodextrin maleic acid monoester (MDMA) as the main raw materials. The influences of the VRPCE on the microscopic properties of cement paste were studied by gel permeation chromatography (GPC), total organic carbon test (TOC), zeta potential, laser particle size analysis, XRD, MIP, TG, and SEM. Finally, the effects of the VRPCE on the macroscopic properties of cement mortar were evaluated through flow time, slump flow, compressive strength, shrinkage, and creep. The results showed that the VRPCE can improve the hydration degree of the cement, optimize the pore structure, increase the porosity, improve the fluidity, compressive strength, and creep, and decrease the shrinkage resistance of the cement mortar. [ABSTRACT FROM AUTHOR]

The pH- and thermo-responsive behavior of polymeric hydrogels M C − c o − M A have been studied in detail using dynamic light scattering D L S , scanning electron microscopy   S E M , nuclear magnetic resonance (1H NMR) and rheology to evaluate the conformational changes, swelling–shrinkage, stability, the ability to flow and the diffusion process of nanoparticles at several temperatures. Furthermore, polymeric systems functionalized with acrylic acid M C and acrylamide M A were subjected to a titration process with a calcium chloride C a C l 2 solution to analyze its effect on the average particle diameter   D z , polymer structure and the intra- and intermolecular interactions in order to provide a responsive polymer network that can be used as a possible nanocarrier for drug delivery with several benefits. The results confirmed that the structural changes in the sensitive hydrogels are highly dependent on the corresponding critical solution temperature C S T of the carboxylic (–COOH) and amide (–CONH2) functional groups and the influence of calcium ions C a 2 + on the formation or breaking of hydrogen bonds, as well as the decrease in electrostatic repulsions generated between the polymer chains contributing to a particle agglomeration phenomenon. The temperature leads to a re-arrangement of the polymer chains, affecting the viscoelastic properties of the hydrogels. In addition, the diffusion coefficients D of nanoparticles were evaluated, showing a closeness among with the morphology, shape, size and temperature, resulting in slower diffusions for larger particles size and, conversely, the diffusion in the medium increasing as the polymer size is reduced. Therefore, the hydrogels exhibited a remarkable response to pH and temperature variations in the environment. During this research, the functionality and behavior of the polymeric nanoparticles were observed under different analysis conditions, which revealed notable structural changes and further demonstrated the nanoparticles promising high potential for drug delivery applications. Hence, these results have sparked significant interest in various scientific, industrial and technological fields. [ABSTRACT FROM AUTHOR]

In recent years, many researchers have focused on designing hydrogels with specific functional groups that exhibit high affinity for various contaminants, such as heavy metals, organic pollutants, pathogens, or nutrients, or environmental parameters. Novel approaches, including cross-linking strategies and the use of nanomaterials, have been employed to enhance the structural integrity and performance of the desired hydrogels. The evolution of these hydrogels is further highlighted, with an emphasis on fine-tuning features, including water absorption capacity, environmental pollutant/factor sensing and selectivity, and recyclability. Furthermore, this review investigates the emerging topic of stimuli-responsive smart hydrogels, underscoring their potential in both sorption and detection of water pollutants. By critically assessing a wide range of studies, this review not only synthesizes existing knowledge, but also identifies advantages and limitations, and describes future research directions in the field of chemically engineered hydrogels for water purification and monitoring with a low environmental impact as an important resource for chemists and multidisciplinary researchers, leading to improvements in sustainable water management technology. [ABSTRACT FROM AUTHOR]

AbstractA fluid loss additive (named AAMN) for cementing ultra-deep reservoirs at high temperature (210 °C) was prepared by a free radical copolymerization method using 2-acrylamido-2-methylpropane sulfonic acid (AMPS), acrylamide (AM), acrylic acid (AA), and N-vinyl-2-pyrrolidinone (NVP) as monomers. Filtration tests at 210 °C demonstrated that AAMN reduced the amount of fluid loss by 22% in fresh cement slurry, 23% in 18 wt% NaCl cement slurry, and 16% in 36 wt% NaCl cement slurry compared to AAM (without NVP) when both were added at 6% bwoc ("bwoc" denotes the addition by the weight of the cement). The pore structure was analyzed using the Brenner-Emme-Teller (BET) method and environmental scanning electron microscopy (ESEM), confirming that AAMN could be adsorbed onto the cement particles surfaces, filling the pores and blocking fluid loss channels. The degradation temperatures of the two copolymers were tested by thermogravimetric analysis (TGA-DTGA) and the molecular dynamics behavior of two Amorphous Cell (AC) models (the amorphous structures with randomly arranged Ca2+, Cl−, Na+ and H2O with the AAMN or AAM) built by Materials Studio 7.0 software, were compared: the introduction of five-element NVP side chains didn’t significantly improve the thermal stability of the AAMN relative to the AAM, but resulted in the AAMN molecular chain maintaining a stable geometry at a temperature of 483 K (210 °C). The AAMN also showed more adsorption groups (–SO3− and –COO−) at the high temperatures, which allowed the AAMN to form a dense "network structure" with Ca2+ and H2O molecules, thus effectively blocking the channels for water molecule loss from the cement slurries. [ABSTRACT FROM AUTHOR]

Flexible perovskite solar cells often experience constant or cyclic bending during their service life. Catastrophic failure of devices may occur due to the crack of polycrystalline perovskite films and delamination at the perovskite and the substrate interfaces, posing a significant stability concern. Here, a multiple dynamic hydrogen bonding polymer network is developed to enhance the mechanical strength of flexible perovskite solar cells in two ways. The main chain of poly(acrylic acid) decreases the mismatch of the coefficient of thermal expansion between the perovskite and the substrate by 16.7% through its flexibility and spatial occupation. The dopamine branch chains provide multiple dynamic hydrogen bonding sites, which contribute to increased energy dissipation upon stress deformation and reduce Young's modulus of perovskite by 54.3%. The inverted flexible perovskite solar cells achieve a champion power conversion efficiency of 23.02% and retain 81.3% of the initial PCE over 2000 h under continuous 1‐sun equivalent illumination. Moreover, devices show excellent mechanical stability by remaining 90.2% of the original value after 5000 bending cycles. [ABSTRACT FROM AUTHOR]

In this study, a multi‐monomer organohydrogel network is fabricated based on radical polymerization. Acrylic acid (AA) and dimethylaminoethyl methacrylate (DMAEMA) are used as hydrophilic monomers, and methoxyethyl acrylate (MEA) serves as a hydrophobic monomer. To endow the organohydrogel with a photo‐responsive property, a fluorescent monomer, 1′‐acryloyl chloride‐3′,3′‐dimethyl‐6‐nitrospiropyran (SPMA) is added. Under ultraviolet (UV) and visible light irradiation, SPMA undergoes ring‐opening and ring‐closing isomerization reactions, respectively. This leads to enhanced and reduced fluorescence. This fluorescence tunability allows for the local regulation of fluorescence in the organohydrogel using a photomask. By employing UV and visible light, complex information can be repeatedly written and erased on the organohydrogel. Additionally, based on the interactions between dimethyl sulfoxide (DMSO) and water within the system, the organohydrogel exhibits excellent anti‐freezing and water‐holding properties, allowing its use in low‐temperature environments and extended preservation time. The organohydrogel has precise information writing capabilities and is more difficult to falsify as an information encryption platform. This study provides guidance for future researchers to develop information writing capabilities with higher precision and broader applications in various environments using smart materials. [ABSTRACT FROM AUTHOR]

Electrokinetic convection-enhanced delivery (ECED) utilizes an external electric field to drive the delivery of molecules and bioactive substances to local regions of the brain through electroosmosis and electrophoresis, without the need for an applied pressure. We characterize the implementation of ECED to direct a neutrally charged fluorophore (3 kDa) from a doped biocompatible acrylic acid/acrylamide hydrogel placed on the cortical surface. We compare fluorophore infusion profiles using ECED (time = 30 min, current = 50 µA) and diffusion-only control trials, for ex vivo (N = 18) and in vivo (N = 12) experiments. The linear intensity profile of infusion to the brain is significantly higher in ECED compared to control trials, both for in vivo and ex vivo. The linear distance of infusion, area of infusion, and the displacement of peak fluorescence intensity along the direction of infusion in ECED trials compared to control trials are significantly larger for in vivo trials, but not for ex vivo trials. These results demonstrate the effectiveness of ECED to direct a solute from a surface hydrogel towards inside the brain parenchyma based predominantly on the electroosmotic vector. Electrokinetic Convection-Enhanced delivery was implemented to direct macro-molecule infusion into the brain from a hydrogel reservoir through electroosmosis, in ex vivo and in vivo rat brain models. [ABSTRACT FROM AUTHOR]

Organic photoluminescent materials with room‐temperature phosphorescence (RTP) are of great interest, yet achieving RTP in hydrogels faces challenges due to water‐quenching effects. In this study, a straightforward method is presented to achieve RTP hydrogel using a self‐healing and salt‐hardening hydrogel. The hydrogel is synthesized by polymerizing acrylic acid (AA) with diethylenetriamine (DETA) as the dynamic crosslinker. The poly(acrylic acid)/DETA hydrogel could achieve an afterglow lasting 1.6 s after soaking with NaBr solution. The salt‐enhanced hydrophobic aggregation of the hydrogel network promotes the clustering of carboxyl groups and oxygen atoms, resulting in a rigid environment that suppresses nonradioactive transitions and leads to the manifestation of RTP. Additionally, the dynamic association of AA‐DETA allows the freeze‐dried hydrogel powder to be blended with various hydrophobic dyes, leading to a remodelable hydrogel with delayed emission of multiple colors. In general, by combining salt‐hardening property with self‐healing property together, a RTP hydrogel platform that can be facilely loaded with various organic dyes is proposed. [ABSTRACT FROM AUTHOR]

Styrene‐maleic acid (SMA) block copolymers with acrylic acid (AA) and methacrylic acid (MAA) were synthesized via a 3‐step process comprising: (1) photopolymerization of styrene and maleic anhydride in solution to yield an alternating styrene‐maleic anhydride (SMAnh) copolymer, (2) copolymerization of SMAnh with AA and MAA to yield SMAnh‐b‐AA and SMAnh‐b‐MAA block copolymers, and (3) base‐catalyzed hydrolysis of the anhydride groups to yield water‐soluble SMA‐b‐AA and SMA‐b‐MAA block copolymers. Copolymer compositions and average molecular weights were determined by the synthesis methodology used in which reversible chain transfer was a key component. Copolymer characterization was carried out by a combination of techniques, namely: ATR‐FTIR, 1H‐NMR, dilute‐solution viscometry, GPC, DSC, and TGA. These novel SMA block copolymers have been designed with a view to their use in membrane protein (MP) extraction from plant extracts and other naturally occurring substances of potential therapeutic value. The main function of the AA or MAA blocks is to widen the operational pH range of SMA in terms of (a) maintaining its water solubility at low pH and (b) stabilizing its MP assemblies in solution. [ABSTRACT FROM AUTHOR]

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Conductive hydrogels have been widely studied in many fields, such as wearable electronic materials, soft robotics, and human medical monitoring, due to their good water retention, elasticity, softness, flexibility, and sensory properties. However, it is still a great challenge to make all-in-one hydrogels with good mechanical properties, rapid self-healing ability, self-adhesion, and sensitive sensing abilities like natural skin. Thus, a multifunctional ionic conductive hydrogel containing hydroxypropyl methylcellulose/acrylic acid/acrylamide/tea polyphenol and Al3+ (HPMC/AA/AM/TP/Al3+) was prepared by a simple method. Owing to multiple dynamic noncovalent interactions, such as hydrogen bonds, electrostatic interactions, and metal coordination, in the ionic conductive hydrogel network, the hydrogel exhibited excellent mechanical properties (breaking stress: 0.032 MPa, toughness: 0.689 MJ m−3), skin-like elastic modulus (0.065 kPa), and stretchability (2225%). The electric conductivity could rapidly self-heal in a dramatically short period of time (5.1 s). Stress and strain self-healing efficiencies reached 93.8% and 99.4% in 60 min, respectively. Its adhesion strengths on wood and pigskin were as high as 13.12 kPa and 9.98 kPa, respectively, due to phenolic hydroxyl groups in TP. Moreover, the hydrogel exhibits good conductivity (3.03 S m−1). Hence, the hydrogel was assembled as a human motion sensor and high sensitivity (GF: 5.13) was obtained over the strain range of 200–1000% with a fast response/recovery time (response time: 0.4 s; recovery time: 0.75 s). Furthermore, the hydrogel sensor can monitor various human movements, including joint movement and vocal cord vibration. The as-prepared hydrogel achieved multiple functions in a single hydrogel system (all-in-one) and has great potential for application in flexible wearable sensors. [ABSTRACT FROM AUTHOR]

Smart materials that respond to external stimuli are useful for applications ranging from artificial skin to sensing to cosmetics. Inspired by natural phenomena (self‐healing, shape memory, and shrinking), this work develops a novel smart bio‐composite using sustainable polyurethane (PU) and sugarcane bagasse (SB) waste without using a solvent. PU is synthesized using polycaprolactone (PCL) diol, castor oil (CO) as a polyol, and isophorone diisocyanate (IPDI) as diisocyanate. Composites are prepared using PU and SB in the presence and absence of poly(acrylic acid) (PAA) and are denoted as PBA and PB, respectively. TGA and DSC analysis indicate the broad (−68.4 °C to 192 °C) thermal stability of these materials. PBA and PB composites exhibited relatively fast (20–30 min) self‐healing and high shape fixity ratio (Rf) (70–83%), and shape recovery ratio (Rr) (82–100%) at 60 °C in the air. Furthermore, PBA shows hot water‐responsive rapid 100% shape recovery and also exhibits thermoresponsive shrinkage properties like human skin. PBA lifts a material 13.3±2 % of its original length by utilizing its thermoresponsive shrinking property. These inexpensive materials with self‐healing, shape recovery, high thermal stability, and thermo‐responsive properties are attractive and may be useful in artificial skin, sensor, and coating applications. [ABSTRACT FROM AUTHOR]

The objective of this study is to explore the novel use of natural polymers like Humic acid, Lignin, and Lignite based hydrogels for the formulation of pesticides and fertilizers that would reduce the residues in soil and run‐off water that pose a threat to human health and the environment. We synthesized hydrogels by grafting Humic acid, lignin, and lignite onto acrylic acid with N′N‐methylene bisacrylamide (MBA) for the ex‐situ encapsulation of thiamethoxam, a common pesticide. Various characterization techniques including Fourier‐transform infrared spectroscopy, Carbon‐13 Solid‐state Cross‐Polarization Magic Angle Spinning Nuclear Magnetic Resonance, X‐ray diffraction, Thermogravimetric Analysis, and Rheology were employed. The release kinetics of thiamethoxam in water from the developed formulations were analyzed using the Korsmeyer‐ Peppas model and the Weibull model. Humic acid and lignin‐based hydrogels exhibited a long‐sustained release for 49 hours, followed by lignite‐based hydrogels (38 hours). According to ANOVA results, the change of biopolymer proved to be an effective factor in reducing the water evaporation rate, which decreased from 99 % to 72.85 % in the soil amended with synthesized hydrogels. In conclusion, the novel formulations of humic acid, lignin, and lignite exhibit potential as slow‐release vehicles for pesticides and fertilizers. This study provides valuable insights for the research community, addressing the need to develop effective strategies for mitigating pesticide residues in soil and water bodies. [ABSTRACT FROM AUTHOR]

Cadmium is a highly toxic metal, and its presence can have adverse effects on both human health and aquatic ecosystems. The efficient removal of cadmium from wastewater is therefore of crucial importance, but traditional methods have proved to be inadequate. Thus, technologies for the treatment of wastewater containing cadmium, including adsorption, have been developed. The aim of this study was the preparation of a polymeric material by the grafting reaction of κ-carrageenan and its use as an adsorbent for cadmium removal. This was performed to study the removal capacity of cadmium ions in synthetic solutions, as well as the effects of pH and ions on adsorption capacity, adsorption kinetics, isotherms, and reusability. Additionally, the disinfectant potential of the solution was evaluated for the inactivation of total coliforms and E. coli in river water. The best adsorption capacity was 75.52 ± 1.325 mg g−1, with the kinetics described by the pseudo-second order model. Maximum adsorption capacity (127.6 ± 1.833 mg g−1) and RL (0.0113) were determined using the Langmuir model, the Freundlich model was the one that best fits the experimental data and indicated cooperative adsorption, and the Dubinin-Radushkevich isotherm was used to obtain the adsorption energy and identify that it is physical. The presence of ions K+, Na+, Mg2+, and Ca2+ in a concentration of 0.5% decreased the adsorption capacity, and that at pH 2.0, the adsorption capacity was drastically reduced. The study indicates that the polymer has potential as an adsorbent for removing cadmium from aqueous solutions and exhibits self-disinfecting properties. [ABSTRACT FROM AUTHOR]

In order to reduce the release of volatile organic compounds (VOCs), it is of great practical significance to develop water-based self-polishing antifouling coatings instead of traditional acrylic self-polishing antifouling coatings. However, when preparing film forming matrix resin emulsions for water-based antifouling coatings, the use of emulsifiers in large amounts causes filmforming defects and poor adhesion. Herein, soap-free emulsion polymerization is utilized to prepare resin emulsions by copolymerization of hydrophilic monomers, lipophilic monomers and polymerizable hydrophilic ionic monomers. The hydrophilic structure can give the water-based polymer selfemulsification function to maintain the stability of the emulsion and can promote the fusion between the latex particles by forming hydrogen bonds and coordination bonds, and its connection with the pigments and fillers in the coating can also promote the excellent film formation of the coating. The experimental results show that the water-based self-polishing antifouling resin emulsion has good storage stability and compatibility with the pigments and fillers. The coatings formulated using this emulsion as the film-forming matrix firmly adhered to substrates and displayed satisfactory antifouling performance even after being exposed to a real sea environment for 18 months. This study presents a simple approach for the development of water-based resin emulsion with good storage stability and good water-based self-polishing marine antifouling coatings. [ABSTRACT FROM AUTHOR]

Numerous tactics have been employed to reduce the issues costing the petroleum sector billions of dollars annually. This paper describes performance based design, synthesis characterizide and evaluation of comb shaped homo and copolymeric additives. The alkylacrylate 1822C were prepared by esterification of acrylic acid with Nafol1822C (Cav=22), the synthesized homompolymer and copolymerized with styrene/vinyl acetate in different molar ratios. All the prepared monomer, homopolymer and copolymers were characterized by using infra-red (FTIR), and Gel permeation chromatography (GPC). The performance of the synthesized modified homopolymer and copolymers as pour point depressors and viscosity index improvers for the Egyptian waxy crude oil. The prepared additives were evaluated as pour point depressants and it was found that the pour point decreases with increasing the concentration of the additives used. The Nafol acrylate 1822C - vinyl acetate copolymers of (PPD6 to PPD9) showed better results than homopolymer Nafol 1822C acrylate (PPD1) and the copolymers of Nafol 1822C-styrene (PPD2-PPD9). Nafol 1822C acrylate - vinyl acetate copolymers PPD7 exhibited the best performance at optimum dosage of 1000ppm as it depresses the pour point by 21oC from the blank. [ABSTRACT FROM AUTHOR]

Nanogels (Ngl) have emerged as one of the most prominent and convenient systems to act as site-specific drug delivery systems and antimicrobial agents for a varied range of diseases. Super absorbent silver incorporated gelatine-based nanogel (Ngl) grafted with acrylic acid (AAc) (gelatin-grafted-acrylic acid) (SGlAsTC) was synthesized by the chemical polymerization method for use as antimicrobial agents and prospective drug delivery matrices. The nanogel was synthesized employing N, N, Methylene bisacrylamide as a crosslinker and TEMED (N, N, N,N-Tetramethylethylenediamine) as a surfactant. The thus obtained Ngl was characterized by particle size analysis (DLS), FT-R, XRD, EDX, FESEM, and DSC to get evidence of nanogel synthesis. FTIR analysis confirmed the crosslinking reaction with AAc of Ngl, and the spherical morphology studies of SGlAsTC were confirmed by the FESEM image, which showed a sphere-like morphology with porous and crumpled particles. A swelling study was carried out at different pHs (2.2, 4.2, 6.5, 7.4, and 8.2) and at two different temperatures (at 25°C and 37°C) to evaluate the water absorption ability of the synthesized Ngl. The synthesized Ngl was subjected to antimicrobial studies against four different bacteria, exhibiting an exceptional inhibition zone for SGlAsTC against Pseudomonas aeruginosa. Excellent results were observed for SGlAsTC against the bacteria compared to the positive control (azithromycin). The results could be attributed to gelatin molecules that facilitated the absorption of the silver-incorporated AAc chains into the bacterial cell wall and speeded up the destruction of the cell cytoplasm. [ABSTRACT FROM AUTHOR]

Catechins, as powerful flavonoids with antioxidant properties, are crucial for the preservation of the human body against free radicals and for promoting overall health. Research has shown that the presence of catechins in urine is linked to a reduced risk of gastric and esophageal cancer. This study introduces an innovative approach using a novel nano‐composite material, composed of magnetic graphene oxide coated with a biocompatible O‐carboxymethyl chitosan/acrylic acid copolymer, for extracting catechins from human urine. The extracted catechins were then analyzed using gas chromatography/mass spectrometry‐selected ion monitoring analysis. Under the optimum conditions, the analytical figures of merit for catechin and epicatechin were linear dynamic range: 0.5–1000 ng/mL, R2 of 0.9991; limit of detection equal to 0.1 ng/mL; relative standard deviation: 4.1 and 3.1 (C = 50 ng/mL, n = 3); and relative recovery was 94%, respectively. The application of this method holds significant promise for advancing clinical and toxicological studies, as well as establishing potential associations between tea consumption and disease prevention. [ABSTRACT FROM AUTHOR]

The polymer obtained from hydrophilic monomers can be transformed into a hydrogel via cross-linking by different cross-linkers. Hydrogels are three-dimensional networks that can absorb several times their weight and swell in water/swelling media, improving the media's viscosity as a thickener. The cross-linked poly(acrylic acid) microparticles prepared via precipitation polymerization technique are often synthesized by radical polymerization and have carboxylic functional groups in their structure, which make the hydrogel properties such as swelling capacity, particle morphology, and viscosity be controlled by physical factors such as solvent, neutralizer, pH, pKa, zeta potential, and ionic strength of the swelling media, as well as synthetic factors including comonomer, cross-linker, and network type. In this paper, the effects of crucial factors on the synthetic and swelling steps are elaborated to facilitate the achievement of poly(acrylic acid)-based xerogels having desirable rheological properties, such as swelling/viscosity optimization, which is the primary purpose of a thickener in any swelling media. [ABSTRACT FROM AUTHOR]

This study aimed to develop composite hydrogels with exceptional piezoelectric properties and pressure sensitivity. To achieve the objective, this study created a deep eutectic solvent (DES) by mixing choline chloride (ChCl), acrylamide (AM), and acrylic acid (AA). Barium titanate nanoparticles (BTNPs) were incorporated as fillers into the deep eutectic solvents (DES) to synthesize the composite hydrogels using frontal polymerization (FP). The mechanical and piezoelectric properties of the resulting composite hydrogels were analyzed using Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). This study found that the BTNPs/P(AM-co-AA) composite hydrogels exhibited excellent mechanical and piezoelectric properties. This is attributed to the high dielectric constant of BTNPs and the electrode polarization phenomenon when subjected to pressure. With a BTNPs content of 0.6 wt%, the maximum compressive strength increased by 3.68 times compared with the hydrogel without added BTNPs. Moreover, increasing the BTNPs content to 0.6 wt% resulted in a 1.48 times increase in generated voltage under the same pressure, compared with the hydrogel with only 0.2 wt% BTNPs. This study provides a method for preparing composite hydrogels with outstanding piezoelectric properties and pressure sensitivity. [ABSTRACT FROM AUTHOR]

The need to create safe materials for biomedical and pharmaceutical applications has become a significant driving force for the development of new systems. Therefore, a chitosan-coated copolymer of itaconic acid, acrylic acid, and N-vinyl caprolactam (IT-AA-NVC) was prepared by radical polymerization and subsequent coating via nanoprecipitation to give a system capable of sustained delivery of melatonin. Although melatonin brings undoubted benefits to the human body, aspects of the optimal dose, route, and time of administration for the obtaining of suitable treatment outcomes remain under discussion. The entrapment of melatonin in biocompatible polymeric systems can prevent its oxidation, decrease its toxicity, and provide an increased half-life, resulting in an enhanced pharmacokinetic profile with improved patient compliance. The structures of the biopolymer and conjugate were proven by FTIR, thermal properties were tested by DSC, and the morphologies were followed by SEM. The loading efficiency and in vitro release profile were studied by means of HPLC, and a delayed release profile with an initial burst was obtained. The potential systemic toxicity of the formulation was studied in vivo; a mild hepatotoxicity was observed following administration of the melatonin-loaded formulation to mice, both by histopathology and blood clinical biochemistry. Histopathology showed a mild nephrotoxicity as well; however, kidney clinical biochemistry did not support this. [ABSTRACT FROM AUTHOR]

In our study, using chromatographic techniques, we isolated three bioactive compounds, which were structurally elucidated as (E)-2-(3-(3,4-dimethoxyphenyl)acrylamido)-N-methylbenzamide (1), 4-Hydroxyquinoline-2-carboxylic acid (2), and (E)-2-Cyano-3-(4-hydroxyphenyl)acrylic acid (3), using spectroscopic methods. The anti-melanogenic, anti-inflammatory, antioxidant, and anti-aging properties were evaluated in vitro by measuring the activity of pharmacological targets including tyrosinase, melanin, NF-κB, hyaluronidase, elastase, collagenase, and Nrf2. Our results show that compound 1 is the most active with IC50 values of 14.19 μM (tyrosinase inhibition), 22.24 μM (melanin inhibition), 9.82–12.72 μM (NF-κB inhibition), 79.71 μM (hyaluronidase inhibition), 80.13 μM (elastase inhibition), 76.59 μM (collagenase inhibition), and 116–385 nM (Nrf2 activation) in the THP-1, HEK001, WS1, and HMCB cells. These findings underscore the promising profiles of the aqueous extract of R. urticifolius at safe cytotoxic concentrations. Additionally, we report, for the first time, the isolation and characterisation of these nitrogenous compounds in the R. urticifolius species. Finally, compound 1, isolated from R. urticifolius, is a promising candidate for the development of more effective and safer compounds for diseases related to skin pigmentation, protection against inflammation, and oxidative stress. [ABSTRACT FROM AUTHOR]

Silicon (Si) -based materials have been identified as a potential alternative anode owing to their superior theoretical capacity compared to conventional graphitic carbon. Nevertheless, the huge volume change (approximately 300%) that occurs while cycling still hampers this system from 100% practical applications. Silicon-monoxide (SiOx)-based anode materials, on the other hand, are being explored extensively due to their unique properties such as high theoretical capacity, formation of Li2O and LiSiO4 during initial lithiation process that act as a natural volume buffer matrix to accommodate volume changes and formation of a stable solid electrolyte interphase layer, which improves the cyclability and capacity retention. Although poly (vinylidene fluoride) (PVdF) is widely used as a binder, the weak van der Waals forces between PVdF and silicon-based particles fail to bind particles effectively, when substantial volume change occurs. Herein, we prepare a series of SiOx-Si-C electrodes with different binders poly (acrylic acid) (PAA), carboxyl methyl cellulose (CMC) and their blends as binder. The prepared polymeric blends are subjected to thermal, morphological, mechanical and physico-chemical analyses. The Li/ SiOx-Si-C cell assembled with 100% PAA as binder delivered a discharge capacity of 1908 mAh g−1 on its first cycle and 724 mAh g−1 on its 100th cycle with a fade in capacity of 11.8 mAh g−1 per cycle. Upon the incorporation of CMC in the PAA blend the cycling performance was found to be poor. Among the various investigated compositions, the electrode with sole poly (acrylic acid) as a binder offers the highest discharge capacity and this is attributed to the high concentration of the functional (carboxylic) group which forms strong hydrogen bonds with - OH groups on the SiOx or carbon surface. The interfacial properties of the polymeric binders are thoroughly investigated by spectroscopies and electrochemical tests. [ABSTRACT FROM AUTHOR]

Xylan-based hydrogels were prepared by the crosslinking copolymerization of xylan with acrylic acid and Nisopropylacrylamide using N,N´-methylenebis-acrylamide as a cross-linker. The structure of the xylan-based hydrogel was analyzed by FTIR and the effects of pH value, adsorbent dosage, initial mass concentration of the methylene blue, and contacting time on adsorption capacities of methylene blue were studied. The results showed that the optimal pH value range for removing methylene blue by hydrogel was 3~6, and the adsorption equilibrium time was about 150 min. The xylan-based hydrogel had good adsorption performance for methylene blue, and its adsorption removal rate for methylene blue solution (≤600 mg/L) was as high as 97% . The adsorption behavior of methylene blue on hydrogels was in accordance with the pseudo-second order kinetic model and Langmuir isothermal adsorption model. According to the Langmuir adsorption model, the maximum adsorption capacity can reach 1 094 mg/g. The xylan-based hydrogel showed good performance of regeneration and reuse, and can be used as biomass adsorbent for methylene blue wastewater treatment. [ABSTRACT FROM AUTHOR]

Manufacturing thin‐film components is crucial for achieving high‐efficiency and high‐power thermal batteries (TBs). However, developing binders with low‐gas production at the operating temperature range of TBs (400–550 °C) has proven to be a significant challenge. Here, we report the use of acrylic acid derivative terpolymer (LA136D) as a low‐volatile binder for thin‐film cathode fabrication and studied the chain scission and chemical bond‐breaking mechanisms in pyrolysis. It is shown LA136D defers to random‐chain scission and cross‐linking chain scission mechanisms, which gifts it with a low proportion of volatile products (ψ, ψ = 39.2 wt%) at even up to 550 °C, well below those of the conventional PVDF (77.6 wt%) and SBR (99.2 wt%) binders. Surprisingly, LA136D contributes to constructing a thermal shock‐resistant cathode due to the step‐by‐step bond‐breaking process. This is beneficial for the overall performance of TBs. In discharging test, the thin‐film cathodes exhibited a remarkable 440% reduction in polarization and 300% enhancement in the utilization efficiency of cathode materials, while with just a slight increase of 0.05 MPa in gas pressure compared with traditional "thick‐film" cathode. Our work highlights the potential of LA136D as a low‐volatile binder for thin‐film cathodes and shows the feasibility of manufacturing high‐efficiency and high‐power TBs through polymer molecule engineering. [ABSTRACT FROM AUTHOR]

Despite the widespread attention garnered by self-healing hydrogels in various fields, achieving a balance between high mechanical strength and self-healing capability remains a challenge. Particularly, the addition of fillers in the fabrication of spray-coated waterproof materials hinders the movement of molecular chains. Simultaneously, the self-repair of metal ions is hindered by issues such as a prolonged required time and low repair rate. Therefore, we introduce a polyvinyl alcohol (PVA) solution subjected to freeze–thaw cycles into the acrylic acid magnesium/calcium hydrogel system, creating a self-healing hydrogel with an interpenetrating polymer network (IPN). Due to the abundance of hydroxyl groups on the PVA molecular chains, during the freezing process, some PVA chains form microcrystals that do not dissolve upon thawing at room temperature. These microcrystals act as cross-linking points, connecting PVA chains into a 3D network. Consequently, the hydrogel, under the dual effects of hydrogen bonds and coordination bonds, exhibits excellent mechanical properties and the ability to self-heal at room temperature. Furthermore, by adjusting the concentration of the PVA solution, the mechanical properties and healing ability of the hydrogel can be tailored to meet various construction requirements. [ABSTRACT FROM AUTHOR]

High‐barrier performance, especially under extreme working conditions, is the key to replacing other types of packaging materials with paper‐based materials. In this paper, two biomass‐based polymers, sodium alginate (SA), and chitosan, were used to form a barrier coating with silicone emulsions to prepare a high‐performance paper‐based barrier material. By double coating, the water and oilproof functions were superimposed. The two prepared coated papers were characterized by infrared spectroscopy analysis, contact angle test, and scanning electron microscopy analysis, while their water resistance, oil resistance, thermal oil resistance, and thermal stability were tested. The water and oil repellency were achieved by double coating. The Cobb value of the chitosan‐silicone emulsion‐coated paper reached 5.3 g/m2, with a Kit grade of Level 12, and could block the penetration of castor oil at 80°C within 24 h. The Cobb value of the sodium alginate‐silicone emulsion‐coated paper was 41.6 g/m2, much higher than that of the uncoated paper, with a Kit grade of up to Level 10, which could slow down the rate of castor oil penetration at 80°C within 24 h. The test results showed that there was no chemical reaction between the paper‐based coatings, and the coated paper surface had good film formation, while the double coating method increased the thermal decomposition temperature of the overall barrier coating, effectively improving the thermal stability of the coating and achieving high‐barrier performance at lower cost and under extreme working conditions. Highlights: Water and oil resistance under extreme operating conditions.High‐performance paper‐based barrier materials.Dual‐layer coating method for water and oil repellency.High‐barrier performance at lower cost.Excellent hot oil resistance and thermal stability. [ABSTRACT FROM AUTHOR]

The use of biodegradable polymers in the plastics industry has been increasing in recent years. The study of the chemical, physical, thermal, and mechanical properties of films based on biodegradable components is of interest to technologists because these properties determine their applicability for food packaging. In this work, films based on natural polymers such as linseed mucilage (LM) and chitosan (CH), as well as poly(acrylic acid) (PAA) were obtained through the casting method and using V‐50 as the initiator. The films were characterized through Fourier Transform Infrared spectroscopy, and thermogravimetric analysis, and their water absorption and swelling capacity, and thermal and mechanical properties were determined. Homogenous flexible, translucid, amber‐colored films, with low absorption and solubility in water were obtained. It was demonstrated through Fourier Transform Infrared analysis the chemical interaction between C–H, CO, and C–O chemical groups of LM, CH, and PAA. In addition, films showed high resistance to thermal decomposition between 125 and 425°C. The mechanical tests of tension allowed the composition of LM in the film, the behavior variates between a plastic and/or elastic material and with tensile strength (Rm) values between 10.8 and 16.4 MPa and elastic modulus (E) values between 56.2 and 169.2 GPa, we observed that at higher quantities of LM and thickness, both E and Rm tend to increase, while %EL decreases. This led us to conclude that the material transitioned from ductile and malleable to rigid and brittle. The films obtained with different ratios of LM/CH/PAA may exhibit a semi‐interpenetrating polymeric networking type morphology. Highlights: Thermal and mechanical properties are of interest in food packaging materials.Water absorption can impact the packaged food.Films can be processed on existing machines for conventional plastics.Some conventional plastics could be replaced by these biodegradable films.Biodegradable films are of great interest to the industry of food packaging. [ABSTRACT FROM AUTHOR]

This study developed a polymeric composite, sodium alginate (SA)/poly (acrylic acid) (PAA) cross-linked with FeCl3 (SA/PAA-Fe), for its function as adsorbent to eliminate acid black 1 dye (AB1) from an aqueous solution. The structural analysis of SA/PAA-Fe revealed a porous structure. To comprehensively evaluate the adsorption of AB1 onto SA/PAA-Fe and gain insight into its mechanism, we examined the effects of solution’s pH, initial dye concentration, adsorbent dosage, contact time, and adsorption temperature. The best adsorption conditions for achieving a highly effective removal percentage of 95.43 % were a pH of 8.9, contact period of 90 min, and a temperature of 45 °C. Pseudo-second-order and Langmuir models were fitted for the isotherm and kinetic model parameters, respectively. Thermodynamic analyses strongly suggested that the adsorption process occurred was endothermic and spontaneous. The adsorption of AB1 was primarily observed on the solid surface, as confirmed by the SEM-EDS and FTIR measurements. [ABSTRACT FROM AUTHOR]

Biosensors (biological sensors) are a promising alternative to standard analytical techniques for testing and monitoring in the environment, among others, heavy metals. Biological materials that detect heavy metals include enzymes, bacteria, fungi, and plant and animal cells. The paper aimed to evaluate the possibilities of biosensor usage in environmental analysis, considering an easy and environmentally friendly analysis of individual compounds (e.g., heavy metals) or their mixtures in various samples directly in the environment, as well as continuous monitoring of these compounds. The work considers biosensors' characteristics, classification, and operation principles. Attention is paid to the possibility of using bioluminescent bacteria as biological material in a biosensor. Examples of the study of heavy metals using various biological sensors were given. It also indicates the possibility of using biosensors to determine microplastics by applying specific hormones (estrogens) receptor use and peptides as a solution or incorporating them into living microbial cells. Additionally, support was given to the use of biosensors to monitor plastics' degradation in the water environment using recombinant whole-cell microbial biosensors as detectors for plastic monomers such as acrylic acid monomers. The application of the biosensors highlighted in the paper is to shorten the time of toxicity studies by using new indicators or acceptors. However, several challenges must be overcome, such as cell viability and activity. A continuous water-monitoring system that can handle a severely toxic sample has yet to be developed in toxicity monitoring [ABSTRACT FROM AUTHOR]

Herein, a novel strategy is presented for the photoinduced decarboxylative and dehydrogenative cross-coupling of a wide range of α-fluoroacrylic acids with hydrogermanes. This methodology provides an efficient and robust approach for producing various germylated monofluoroalkenes with excellent stereoselectivity within a brief photoirradiation period. The feasibility of this reaction has been demonstrated through gram-scale reaction, conversion of germylated monofluoroalkenes, and modification of complex organic molecules. [ABSTRACT FROM AUTHOR]

Hydrogels hold great promise in the field of flexible electronics. Attempts in this area tend to the microstructure design of hydrogels, giving them specific adhesion and multi‐sensing functions. Here, a novel phase separation‐derived anisotropic adhesive structural color hydrogel film is presented for visually flexible electronics. The hydrogel film is generated by template replicating colloidal crystal by using phase separation emulsions of hydrophilic monomer (acrylic acid, AA), hydrophobic monomer (lauryl methacrylate, LMA), co‐monomer ([2‐(methacryloyloxy) ethyl] dimethyl‐(3‐sulfopropyl) ammonium hydroxide (SBMA)), surfactants (hexadecyl trimethyl ammonium bromide, CTAB) and initiator (ammonium persulphate (APS)). The appearance of phase separation results in asymmetric morphologies of hydrogel film, imparting them with anisotropic adhesive performance. Attributed to the formation of inverse opal scaffold structure, the hydrogel film is featured with vivid structural color, showing superior capability in self‐reporting mechanical behavior. Additionally, benefitting from the presence of abundant ions, the hydrogel film exhibits great conductivity. Thus, the resultant hydrogel film is demonstrated with stable dual‐signal sensing properties involving color‐changing and conductivity feedback ability to respond to human activities. These features make the proposed anisotropic adhesive structural color hydrogel film highly potential in the flexible electronic field. [ABSTRACT FROM AUTHOR]

Transition metal-catalyzed asymmetric hydrogenation is one of the most efficient methods for the preparation of chiral α-substituted propionic acids. However, research on this method, employing cleaner earth-abundant metal catalysts, is still insufficient in both academic and industrial contexts. Herein, we report an efficient nickel-catalyzed asymmetric hydrogenation of α-substituted acrylic acids affording the corresponding chiral α-substituted propionic acids with up to 99.4% ee (enantiomeric excess) and 10,000 S/C (substrate/catalyst). In particular, this method can be used to obtain (R)-dihydroartemisinic acid with 99.8:0.2 dr (diastereomeric ratio) and 5000 S/C, which is an essential intermediate for the preparation of the antimalarial drug Artemisinin. The reaction mechanism has been investigated via experiments and DFT (Density Functional Theory) calculations, which indicate that the protonolysis of the C-Ni bond of the key intermediate via an intramolecular proton transfer from the carboxylic acid group of the substrate, is the rate-determining step. Research on employing cleaner and more environmentally friendly earth-abundant metal catalysts for asymmetric hydrogenation is still insufficient in both academic and industrial contexts. Herein, the authors report the synthesis of chiral α-substituted propionic acids via nickel-catalyzed asymmetric hydrogenation of α-substituted acrylic acids using H2. [ABSTRACT FROM AUTHOR]

Polymer composites offer numerous benefits, including low cost, easy processability, and diverse applications. In this work, we fabricated a composite material with high thermal conductivity and electromagnetic interference (EMI) shielding performance using EGaIn, a liquid metal (referred to as LM in this paper), MXene (MX), and expanded graphite (EG) as multifunctional fillers, along with polyacrylic acid (PAA). LM was used to exfoliate MX under the effect of shear force, which not only reduced the size of MX but also increased the aspect ratio of the 2D‐structured MX. MX was filled into the pores of EG to make a heat transfer path, thereby enhancing its thermal conductivity, mechanical properties, and EMI SE properties. LM served as the initiator of free‐radical polymerization to convert acrylic acid (AA) into PAA. Finally, the LMMX/EG/PAA composite was hot‐pressed to make the heat‐transfer path dense. As a result, the LMMX/EG/PAA composite exhibited a thermal conductivity of 1.88 W/m·K and an EMI shielding effect of 52 dB. [ABSTRACT FROM AUTHOR]

We formed core–shell‐like polyelectrolyte complexes (PECs) from an anionic bottlebrush polymer with poly (acrylic acid) side chains with a cationic linear poly (allylamine hydrochloride). By varying the pH, the number of side chains of the polyanionic BB polymers (Nbb), the charge density of the polyelectrolytes, and the salt concentration, the phase separation behavior and salt resistance of the complexes could be tuned by the conformation of the BBs. By combining the linear/bottlebrush polyelectrolyte complexation with all‐liquid 3D printing, flow‐through tubular constructs were produced that showed selective transport across the PEC membrane comprising the walls of the tubules. These tubular constructs afford a new platform for flow‐through delivery systems. [ABSTRACT FROM AUTHOR]

The current effort in environmental remediation is aimed at removing iodine-131 radionuclide from radioactive liquid waste produced by an Egyptian nuclear power plant using some synthesised alginate derivatives. Two different copolymers, namely sodium alginate poly (acrylic acid) (P1) and sodium alginate poly (acrylic acid-methacrylic acid) (P2), are prepared using gamma radiation. The ability of these polymers to remove 131I radionuclide as sorbents has been investigated. The synthesised polymers exhibit excellent adsorption performance for 131I ions, and the adsorption equilibrium requires only 30 min, which reveals that the sorption process is kinetically faster than most of the other materials reported previously. The removal percents for 131I radionuclide at a pH of 3.0 at room temperature on P1 and P2 are 77.7% and 84.2%, respectively. The sorption capacities of the two polymers demonstrate that P2 > P1, with capacities of 67.9 and 58.5 mg/g, respectively. Four linear kinetic models are investigated: pseudo-first order, pseudo-second order, Elovich, and Weber–Morris models. Regarding their calculated parameters, these models indicate that the adsorption process of I-ions on both P1 and P2 is controlled by chemisorption. Four equilibrium isotherm models (Redlich-Peterson, Langmuir, Freundlich, and Harkin-Jura) are investigated, revealing that the adsorption process is a monolayer and multilayer process on a heterogeneous surface. [ABSTRACT FROM AUTHOR]