Search

This paper reports a simple electrochemical strategy for the determination of microRNAs (miRNAs) using a commercial His-Tag-Zinc finger protein (His-Tag-ZFP) that binds preferably (but non-sequence specifically) RNA hybrids over ssRNAs, ssDNAs, and dsDNAs. The strategy involves the use of magnetic beads (His-Tag-Isolation-MBs) as solid support to capture the conjugate formed in homogenous solution between His-Tag-ZFP and the dsRNA homohybrid formed between the target miRNA (miR-21 selected as a model) and a biotinylated synthetic complementary RNA detector probe (b-RNA-Dp) further conjugated with a streptavidin-horseradish peroxidase (Strep-HRP) conjugate. The electrochemical detection is carried out by amperometry at disposable screen-printed carbon electrodes (SPCEs) (- 0.20 V vs Ag pseudo-reference electrode) upon magnetic capture of the resultant magnetic bioconjugates and H2O2 addition in the presence of hydroquinone (HQ). The as-prepared biosensor exhibits a dynamic concentration range from 3.0 to 100 nM and a detection limit (LOD) of 0.91 nM for miR-21 in just ~ 2 h. An acceptable discrimination was achieved between the target miRNA and other non-target nucleic acids (ssDNA, dsDNA, ssRNA, DNA-RNA, miR-122, miR-205, and single central- or terminal-base mismatched sequences). The biosensor was applied to the analysis of miR-21 from total RNA (RNAt) extracted from epithelial non-tumorigenic and adenocarcinoma breast cells without target amplification, pre-concentration, or reverse transcription steps. The versatility of the methodology due to the ZFP's non-sequence-specific binding behavior makes it easily extendable to determine any target RNA only by modifying the biotinylated detector probe.

Nowadays, materials, solvents, and techniques are being used in accordance with the principles of green analytical chemistry for the development and application of electrochemical (bio)sensors. Electrodes prepared from nontoxic materials, eco-friendly solvents and reagents, and methodologies that make it possible the reduction of the sample size and the amount of waste products are being used with the main objective of minimizing the environmental impact. These aspects are briefly discussed in this short review through addressing the state of the art of electrochemical (bio)sensors in connection with the green chemistry. The relevant aspects related to the different items are considered with some illustrative examples taken from the recent literature. With the aim of providing suitable complete information, a table summarizing the fundamentals and analytical characteristics of some configurations is included in the Supporting Information .

Nowadays, there is increasing demand to overcome the major constraints involved in cumbersome and protracted procedures used in conventional laboratory methods for molecular detection and develop methodologies suitable to near real-time, continuous, and direct monitoring of the target analyte in the analyzed sample at decentralized settings. In this context, biosensors using electrochemistry as transduction technique are particularly attractive to monitor binding-induced changes in the rigidity of a redox-tagged nucleic acid or peptide-switching probes (switch-based biosensors) or a capture antibody attached to an interrogating electrode. Sensors based on biomolecular switches, DNAs, aptamers, and peptides that reversibly shift between two or more conformations (or conformational ensembles) in response to the binding of a specific target ligand have been applied to the determination of a wide range of relevant analytes (nucleic acids, proteins, small molecules, and ions) and are rapid (responding in minutes), sensitive, reagentless, easily reusable, and less prone to fouling issues. They are capable to report in near real time the target binding event without any subsequent processing step, directly in challenging samples or continuously in flowing samples, and even in vivo using affordable and miniaturization-compatible instrumentation. Only a few redox-labeled capture antibody–based immunosensing strategies have been reported to date for the reagentless and continuous electrochemical determination of relevant analytes.

In this work, the development of the first integrated electrochemical immunosensor for the determination of the IL-13Rα2 is reported. The strategy involves the immobilization of a biotinylated capture antibody onto streptavidin-modified screen-printed electrodes through grafting with p-aminobezoic acid (p-ABA) and further activation using EDC/Sulfo-NHS chemistry. A hybrid nanomaterial composed of multiwalled carbon nanotubes (MWCNTs) and Graphene Quantum Dots (GQDs) was used as nanocarrier of multiple detector antibody and HRP molecules. Amperometric detection with the system H 2 O 2 /hydroquinone (HQ) achieved a linear calibration plot ranging from 2.7 to 100 ng mL −1 IL-13sRα2, with a LOD value of 0.8 ng mL −1 . The immunosensor showed an excellent selectivity and was successfully applied to the determination of the target receptor directly in small amounts of raw cellular lysates and extracts of paraffin-embedded tissues from patients diagnosed with colorectal cancer at different stages. Fil: Serafín, V.. Universidad Complutense de Madrid; España Fil: Valverde, A.. Universidad Complutense de Madrid; España Fil: Martínez García, G.. Universidad Autónoma de Madrid; España Fil: Martínez Periñán, E.. Universidad Autónoma de Madrid; España Fil: Comba, Fausto Nahuel. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Departamento de Fisicoquímica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina Fil: Garranzo Asensio, M.. Instituto de Salud Carlos III; España Fil: Barderas, R.. Instituto de Salud Carlos III; España Fil: Yáñez Sedeño, P.. Universidad Complutense de Madrid; España Fil: Campuzano, S.. Universidad Complutense de Madrid; España Fil: Pingarrón, J. M.. Universidad Complutense de Madrid; España. IMDEA Nanoscience; España

The first electrochemical immunosensor for the determination of CXCL7 (chemokine (C-X-C motif) ligand 7) autoimmune biomarker is reported in this work. Click chemistry-assisted antibodies immobilization was performed by reaction of azide functionalized-multi-walled carbon nanotubes (MWCNTs) and ethynyl-IgG onto screen-printed carbon electrodes. The capture antibodies were further immobilized onto IgG-MWCNTs conjugates. After a blocking step with casein, a sandwich immunoassay was implemented involving biotinylated detector antibodies and alkaline phosphatase (AP)-streptavidin conjugate. Differential pulse voltammetry upon addition of 1-naphthylphosphate was used as the analytical readout. A linear calibration plot between 0.5 and 600 pg mL−1 CXCL7 and a LOD value of 0.1 pg mL−1 were obtained. The usefulness of the immunosensor was demonstrated by the successful analysis of serum samples from patients with rheumatoid arthritis.

This work reports the first amperometric immunosensor for the simultaneous determination of four fertility-related hormones in saliva: progesterone (P4), luteinizing hormone (LH), estradiol (E2), and prolactin (PRL). The immune platform involves direct competitive (P4 and E2), and sandwich (LH and PRL) assays implemented onto functionalized magnetic microbeads (MBs). The amperometric transduction was performed upon placing the MBs-immunoconjugates onto each of the four working electrodes of the SPCE array (SP4CEs) and applying a detection potential of -0.20 V (vs. Ag pseudo-reference electrode) using the H2O2/hydroquinone (HQ) system. The achieved analytical and operational characteristics of the developed multiplexed immunoplatform showed a sensitivity that allows the determination of these hormones in saliva, and an adequate selectivity to analyse complex clinical samples. The bioplatform was employed for the determination of the set of four hormones in human saliva samples collected from individuals with different hormonal profiles. The results obtained using a conventional potentiostat were compared with those provided employing a novel low-cost custom-designed and field-portable quadruple potentiostat. Similar results were found which also agreed with those obtained by applying ELISA methods for the determination of single hormones.

Growth arrest-specific 6 (GAS6) protein plays a key role in processes related to proliferation, inflammation, angiogenesis, and atherosclerotic plaque formation. In addition, it has been reported that plasma levels of GAS6 are related to cancer prognosis and other relevant pathologies, such as heart failure or sepsis. We report here the first electrochemical immunoplatform for the determination of GAS6, which has demonstrated to be competitive with other available methodologies in terms of cost, simplicity, and decentralized application. The developed immunoplatform involves a sandwich immunoassay using magnetic microparticles (MBs) and uses amperometric detection at disposable screen-printed carbon electrodes (SPCEs). The MBs were modified with an antibody specific to GAS6 for its selective capture, which is further recognized by a biotinylated secondary antibody subsequently labeled with a streptavidin-horseradish peroxidase (Strep-HRP) conjugate. The electrochemical detection was carried out using the hydroquinone (HQ)/H2O2 system. The developed bioplatform exhibits a great selectivity and low limit of detection (27 pg/mL) that allowed the determination of the GAS6 circulating level in plasma samples from patients suffering heart failure (HF) and diagnosed with pancreatic ductal adenocarcinoma (PDAC), as well as the determination of the target protein in raw secretomes of human colorectal cancer cell lines., This work is part of the POSITION-II project fundedby the ECSEL Joint Undertaking under grant numberEcsel-783132-Position-II-2017-IA;www.position-2.eu,and PCI2018-093067 (Spanish Ministerio de Ciencia eInnovación) to M.P. The financial support of PID2019-103899RB-I00 (Spanish Ministerio de Ciencia e Inno-vación) Research Project to S.C., PI17CIII/00045 andPI20CIII/00019 grants from the AES-ISCIII program toR.B. and the TRANSNANOAVANSENS-CM Program fromthe Comunidad de Madrid (Grant S2018/NMT-4349) toS.C., RTI2018-095672-B-I00 (Spanish Ministerio de Cienciae Innovación) to P.G.F.; Fundació la Marató de TV3 project081010toM.B.; researchprojectPI20/00625,fromtheAES-ISCIII/FEDER program, to P.N, are gratefully acknowl-edged. A. Montero-Calle acknowledges the support of theFPU predoctoral contracts by the Spanish Ministerio deEducación, Cultura y Deporte. G.S-F. is recipient of a pre-doctoral contract (grant number 1193818N) supported byThe Flanders Research Foundation (FWO). C. Muñoz-SanMartín acknowledges a predoctoral contract from Complutense University of Madrid. R.M. Torrente-Rodríguezacknowledges a Talento-Contract from Comunidad deMadrid (2019-T2/IND-15965).

A magnetic beads (MB)-involved amperometric immunosensor for the determination of ST2, a member of the IL1 receptor family, is reported in this work. The method utilizes a sandwich immunoassay and disposable screen-printed carbon electrodes (SPCEs). Magnetic immunoconjugates built on the surface of carboxylic acid-microsized magnetic particles (HOOC-MBs) were used to selectively capture ST2. A biotinylated secondary antibody further conjugated with a streptavidin peroxidase conjugate (Strep-HRP) was used to accomplish the sandwiching of the target protein. The immune platform exhibits great selectivity and a low limit of detection (39.6 pg mL ) for ST2, allowing the determination of soluble ST2 (sST2) in plasma samples from healthy individuals and patients diagnosed with pancreatic ductal adenocarcinoma (PDAC) in only 45 min once the immunoconjugates have been prepared. The good correlation of the obtained results with those provided by an ELISA kit performed using the same immunoreagents demonstrates the potential of the developed strategy for early diagnosis and/or prognosis of the fatal PDAC disease., This research was funded by Spanish Ministerio de Ciencia e Innovación. PID2019- 103899RB-I00, Spanish Ministerio de Ciencia, Innovación y Universidades, RTI2018-095672-B-I00, Comunidad de Madrid, S2018/NMT-4349, and AES-ISCIII/FEDER, PI20/00625

Metastasis is responsible for about 90% of cancer-associated deaths. In the context of solid tumors, the low oxygen concentration in the tumor microenvironment (hypoxia) is one of the key factors contributing to metastasis. Tumor cells adapt to these conditions by overexpressing certain proteins such as programmed death ligand 1 (PD-L1) and hypoxia-inducible factor 1 alpha (HIF-1α). However, the determination of these tumor hypoxia markers that can be used to follow-up tumor progression and improve the efficiency of therapies has been scarcely addressed using electrochemical biosensors. In this work, we report the first electrochemical bioplatform for the determination of PD-L1 as well as the first one allowing its simultaneous determination with HIF-1α. The target proteins were captured and enzymatically labeled on magnetic microbeads and amperometric detection was undertaken on the surface of screen-printed dual carbon electrodes using the hydrogen peroxide/peroxidase/hydroquinone system. Sandwich immunoassays were implemented for both the HIF-1α and PD-L1 sensors and the analytical characteristics were evaluated providing LOD values of 86 and 279 pg mL−1 for the amperometric determination of PD-L1 and HIF-1α standards, respectively. The developed electrochemical immunoplatforms are competitive versus the only electrochemical immunosensor reported for the determination of HIF-1α and the “gold standard” ELISA methodology for the single determination of both proteins in terms of assay time, compatibility with the simultaneous determination of both proteins making their use suitable for untrained users at the point of attention. The dual amperometric immunosensor was applied to the simultaneous determination of HIF-1α and PD-L1 in cancer cell lysates. The analyses lasted only 2 h and just 0.5 μg of the sample was required.

Harmful algal blooms (HABs) are more frequent as climate changes and tropical toxic species move northward, especially along the Iberian Peninsula, a rich aquaculture area. Monitoring programs, detecting the presence of toxic algae before they bloom, are of paramount importance to protect ecosystems, aquaculture, human health and local economies. Rapid, reliable species identification methods using molecular barcodes coupled to biosensor detection tools have received increasing attention as an alternative to the legally required but impractical microscopic counting-based techniques. Our electrochemical detection system has improved, moving from conventional sandwich hybridization protocols using different redox mediators and signal probes with different labels to a novel strategy involving the recognition of RNA heteroduplexes by antibodies further labelled with bacterial antibody binding proteins conjugated with multiple enzyme molecules. Each change has increased sensitivity. A 150-fold signal increase has been produced with our newest protocol using magnetic microbeads (MBs) and amperometric detection at screen-printed carbon electrodes (SPCEs) to detect the target RNA of toxic species. We can detect as few as 10 cells L&minus, 1 for some species by using a fast (~2 h), simple (PCR-free) and cheap methodology (~2 EUR/determination) that will allow this methodology to be integrated into easy-to-use portable systems.

An essential part of current medical diagnosis is reliable multiplexed determination of clinical relevant biomarkers at different molecular level that allows the evaluation of the pathological stage and differential patient diagnosis. Within this context, electrochemical immunosensors have proven to offer significant advantages compared to conventional methodologies for this purpose, in terms of cost, portability, easy use, rapid readout, and amenability to direct and multiplexing analysis in complex samples. In addition, these devices are easy to manufacture, implemented using cost-effective instrumentation and automation, which makes them suitable for implementing as point-of-care (POC) systems and/or utilization in undeveloped areas. Considering this rapid moving and highly interesting field, this chapter offers an updated overview describing with critical arguments the special features and opportunities currently provided by electrochemical immunosensing for multiplexed determination in clinical diagnosis by highlighting recent advances and key points to satisfy the current POC immunodiagnosis demands. Main objectives pursued in the field, which included the development of multiplexed and integrated systems to allow a more reliable identification/diagnosis and meet the POC testing (POCT) and routine analysis requirements will be didactically described. The variety of amplification strategies involving nanomaterials and attractive surface modification protocols will be described with special attention, as well as those challenging applications, some of them in a pioneering way in the field of electrochemical immunosensors, are successfully addressed. Furthermore, current progress and chances supplied for multiplexing detection at different molecular levels and the challenges that must be faced to bring them to market and future prospects will also be commented.

his work reports the first electrochemicalimmunoassay involving magnetic microbeads (MBs) forthe determination of galectin-3 (Gal-3), a -galactosidase-binding lectin that acts as mediator of heart failure (HF).MBs-captured sandwich-type immune complexes andamperometric detection at disposable screen-printed car-bon electrodes were used. The immunoplatform showed adetection limit of 8.3 pgmL 1, good reproducibility, andexcellent selectivity. The endogenous concentration ofGal-3 in human plasma from HF patients was determinedwith results in agreement with those obtained usingELISA. The multiplexing feasibility of the developedimmunoplatform was demonstrated for the simultaneousdetermination of Gal-3 and N-terminal pro-brain natriu-retic peptide (NT-proBNP), This work is part of the POSITION-II project funded bythe ECSEL Joint Undertaking under grant number Ecsel-783132-Position-II-2017-IA; www.position-2.eu, andPID2019-103899RB-I00 (Ministerio de Ciencia e Innova-ción), and of the NANOCARDIOFLEX Project (RetosColaboración RTC-2015-4184-1, cofinanced by the Minis-terio de Economía y Competitividad and FEDER “unamanera de hacer Europa”). The financial support of theRTI2018-096135-B-I00 (Ministerio de Ciencia, Innovacióny Universidades) and PID2019-103899RB-I00 (Ministeriode Ciencia e Innovación) and Research Projects and theTRANSNANOAVANSENS-CM Program from the Co-munidad de Madrid (Grant S2018/NMT-4349) are alsogratefully acknowledged. S.V.P acknowledges the doctor-al fellowship from the Fundación Carolina

The preparation of an integrated biosensor for the easy, fast, and sensitive determination of miRNAs is described based on a direct hybridization format and a label-free voltammetric detection. The biosensor involves a disposable carbon electrode substrate doubly nanostructured with reduced graphene oxide (rGO) and AuNPs modified with pyrene carboxylic acid (PCA) and 6-ferrocenylhexanethiol (Fc-SH), respectively. A synthetic amino terminated DNA capture probe was covalently immobilized on the CO2H moieties of PCA/rGO, while Fc-SH was used as a signaling molecule. Differential pulse voltammetry was employed to record the decrease in the oxidation peak current of Fc after the hybridization due to the hindering of the electron transfer upon the formation of the DNA-RNA duplex on the electrode surface. The stepwise biosensor preparation was characterized by surface and electrochemical techniques showing the role played by each biosensor component as well as the reliability of the target miRNA determination. The determination of the oncogene miRNA-21 synthetic target allowed quantification in the low femtomolar range (LOD of 5 fM) with a high discrimination of single-base mismatched sequences in a single 30-min incubation step. The bioplatform allowed the determination of the target miRNA in a small amount of total RNA extracted from breast cancer (BC) cells or directly in serum samples collected from BC patients without the need for prior extraction, purification, amplification, or reverse transcription of the genetic material and with no matrix effect. Graphical abstract.

Over the past decade, artificial nanomaterials that exhibit properties similar to those of enzymes are gaining attraction in electrochemical biosensing as highly stable and low-cost alternatives to enzymes. This review article discusses the main features of the various nanomaterials (metal oxide, metal, and carbon-based materials) explored so far to mimic different kinds of enzymes. The unprecedented opportunities imparted by these functional nanomaterials or their nanohybrids, mostly providing peroxidase-like activity, in electrochemical affinity biosensing are critically discussed mainly in connection with their use as catalytic labels or electrode surface modifiers by highlighting representative strategies reported in the past 5 years with application in the food, environmental, and biomedical fields. Apart from outlining the pros and cons of nanomaterial-based enzyme mimetics arising from the impressive development they have experienced over the last few years, current challenges and future directions for achieving their widespread use and exploiting their full potential in the development of electrochemical biosensors are discussed. Graphical abstract.

Screen-printing technology has revolutionized many fields, including that of electrochemical biosensing. Due to their current relevance, this review, unlike other papers, discusses the relevant aspects of electrochemical biosensors manufactured using this technology in connection to both paper substrates and wearable formats. The main trends, advances, and opportunities provided by these types of devices, with particular attention to the environmental and biomedical fields, are addressed along with illustrative fundamentals and applications of selected representative approaches from the recent literature. The main challenges and future directions to tackle in this research area are also pointed out.

Nowadays, electrochemical biosensors are reliable analytical tools to determine a broad range of molecular analytes because of their simplicity, affordable cost, and compatibility with multiplexed and point-of-care strategies. There is an increasing demand to improve their sensitivity and selectivity, but also to provide electrochemical biosensors with important attributes such as near real-time and continuous monitoring in complex or denaturing media, or in vivo with minimal intervention to make them even more attractive and suitable for getting into the real world. Modification of biosensors surfaces with antibiofouling reagents, smart coupling with nanomaterials, and the advances experienced by folded-based biosensors have endowed bioelectroanalytical platforms with one or more of such attributes. With this background in mind, this review aims to give an updated and general overview of these technologies as well as to discuss the remarkable achievements arising from the development of electrochemical biosensors free of reagents, washing, or calibration steps, and/or with antifouling properties and the ability to perform continuous, real-time, and even in vivo operation in nearly autonomous way. The challenges to be faced and the next features that these devices may offer to continue impacting in fields closely related with essential aspects of people’s safety and health are also commented upon.

A comparison of the performance of two electrochemical immunosensors for the determination of the anorexigen biomarker peptide YY (PYY) is reported by using as scaffolds screen printed gold electrodes modified either by oxidative grafting of p-aminobenzoic acid (p-ABA) or by assembling of a 4-mercaptobenzoic acid (4-MBA) SAM. Covalent immobilization of capture antibodies on the surface-confined carboxyl groups was carried out by EDC/NHSS chemistry, and competitive immunoassays between target PYY and Biotin-PYY were implemented. Upon labeling with alkaline phosphatase (AP)-streptavidin conjugate and 1-naphtyl phosphate addition, differential pulse voltammograms recorded between −0.2 and +0.7 V were used as analytical readout. All the steps involved in the functionalization of the electrodes and the preparation of the immunosensors were monitored by electrochemical impedance spectroscopy. The calibration plot for PYY using the AP-Strept-Biotin-PYY(PYY)-anti-PYY-Phe-N-SPAuE immunosensor provided a linear current vs. log [PYY] plot extending between 10−6 and 103 ng/mL PYY with a detection limit of 3 × 10−7 ng/mL. These analytical characteristics are remarkably better than those obtained with the immunosensor prepared with 4-MBA SAM-SPAuEs. The AP-Strept-Biotin-PYY(PYY)-anti-PYY-Phe-N-SPAuE immunosensor was used to analyze human serum and saliva samples spiked with PYY at concentrations fitting with normal levels in these biological fluids.

This paper reports a dual electrochemical biosensor involving carboxylated- or neutravidin-functionalized magnetic microbeads and dual screen-printed carbon electrodes for the simultaneous determination of rheumatoid factor (RF) and anti-cyclic citrullinated peptide (CCPA) autoantibodies used as biomarkers for the detection of rheumatoid arthritis autoimmune disease. Sandwich-type biosensors involving Fc fragments of IgG Fc(IgG) and biotinylated cyclic cytrullinated peptide (CCP-biotin) to form CCP-biotin-Neutr-MBs for the specific immobilization of RF and CCPA, respectively, as well as conjugation with HRP-IgM and HRP-IgG for RF and CCPA, respectively, were prepared. Amperometric detection was performed at -0.20 V vs. Ag pseudo-reference electrode using the H2O2/hydroquinone (HQ) system upon capturing the bioconjugates onto the corresponding working electrode (WE1 or WE2) of SPCdEs. The dual biosensor exhibits high sensitivity for RF and CCPA with LOD values of 0.8 and 2.5 IU mL-1, respectively. The simultaneous determination can be completed in about two hours using a simple protocol and a sample volume (25 μL) four times smaller than that required by the ELISA method. The dual electrochemical biosensor was used for the determination of both target biomarkers in human serum.

Modern (bio)electroanalysis is currently in consonance with the demands of green chemistry owing to both the intrinsic characteristics of electrochemical transduction and the unique features offered by electrochemical devices to minimize the use of reagents, organic solvents and hazardous substances. Remarkable efforts have been made in recent years in the preparation of modified electrode substrates involving non-toxic materials and greener protocols, more biological than chemical, to perform the electrochemical measurements or pretreat the sample. It is also notable in this context the particular attention that has been paid to the development of environmentally friendly electrochemical sensors involving paper, molecularly imprinted polymers and ion-selective electrodes. In addition, the replacement of organic solvents by eco-friendly solvents (ionic liquids, deep eutectic solvents and supercritical fluids) and the growing interest in developing methodologies capable of reducing the sample size and the amount of waste products, mainly by miniaturization of the electrochemical approaches and their coupling with continuous techniques, are novel approaches to be considered in green electroanalysis. All these relevant aspects are discussed and illustrated in this chapter through a critical approach to representative studies selected from the recent literature.

Two different disposable amperometric biosensors for the rapid detection and quantification of Brettanomyces bruxellensis (Brett) and total yeast content in wine were constructed. The biosensing approach implied the use of magnetic capturing elements based on core-shell Fe3O4@SiO2 superparamagnetic nanoparticles (NanoCaptors) functionalized with specific bioreceptors: Concanavalin A (Con A) for total yeast analysis, and anti-Brett polyclonal antibodies for Brett. A Con A-peroxidase conjugate and carbon screen printed electrodes were used as signaling element and sensing interfaces, respectively. The biosensor based on antibody-modified magnetic nanoparticles allowed the amperometric detection of B. bruxellensis in buffer solution and red wine samples in the range of 10 - 106 CFU/mL, with low detection limits of 6 CFU/mL and 8 CFU/mL, respectively. In addition, the use of Con A-linked magnetic nanoparticles as capturing elements allowed determination of total yeast content in buffer solution and red wine in the range of 10 - 106 CFU/mL, with detection limit of 5 CFU/mL. These electrochemical biosensors also exhibited high reproducibility, selectivity and storage stability.

Autoantibodies (AAbs) are antibodies produced against our own cells or tissues either providing a first defense against infections or indicating the presence of pathological processes. They are not only able to inform on the evolution of diseases but also to predict some illnesses well in advance. Currently, the evaluation of the number and type of formed AAbs is employed to assess the risk, rate, severity and progression of autoimmune and cancer diseases, and to help find therapies to prevent or mitigate the impact of these illnesses. Conventional methods for the determination of AAbs generally suffer from low sensitivity, time-consuming and laborious methodologies, and need specialized technicians and well-equipped labs. Consequently, seeking new methodologies for the rapid and low-cost screening of AAbs is of great interest for global health because it would shorten the delay between sample collection and diagnosis and improve the introduction of modern diagnostics into the developing world. Electrochemical biosensors are considered as a promising alternative to conventional techniques for the determination of clinical biomarkers due to their simplicity of use, low cost, high sensitivity, multiplexing abilities or compatibility with microfabrication and point of care testing. This review is focused on the critical discussion of selected electrochemical biosensors described to date for the determination of AAbs related to autoimmune diseases and several types of cancer. An overview pointing out future directions in this field is also provided.

This paper describes the first biosensor reported to date for the determination of mustard seed traces. The biosensor consists of an amperometric immunosensing platform able to sensitively and selectively determine Sin a 1 content, the major allergen of yellow mustard and the most abundant protein of these seeds. The immunosensing platform exploits the coupling of magnetic microbeads (MBs) modified with sandwich-type immune complexes, comprising polyclonal and monoclonal antibodies, selective to the target protein for its capturing and detection, respectively. In addition, a HRP-conjugated secondary antibody was used for enzymatic labelling of the monoclonal antibody, and amperometric transduction was made at screen-printed carbon electrodes (SPCEs) using the hydroquinone (HQ)/H2O2 system. The electrochemical immunosensor allows the simple and fast detection (a single 1-h incubation step) of Sin a 1 with a limit of detection of 0.82 ng mL−1 (20.5 pg of protein in 25 μL of sample) with high selectivity against structurally similar non-target allergenic proteins (such as Pin p 1 from pine nut). The developed immunoplatform was successfully used for the analysis of peanut, rapeseed, cashew, pine nut and yellow mustard extracts, giving only positive response for the yellow mustard extract with a Sin a 1 content, in full agreement with that provided by conventional ELISA methodology.

Early diagnosis in primary care settings can increase access to therapies and their efficiency as well as reduce health care costs. In this context, we report in this paper the development of a disposable immunoplatform for the rapid and simultaneous determination of two protein biomarkers recently reported to be involved in the pathological process of neurodegenerative disorders (NDD), tau protein (tau), and TAR DNA-binding protein 43 (TDP-43). The methodology involves implementation of a sandwich-type immunoassay on the surface of dual screen-printed carbon electrodes (dSPCEs) electrochemically grafted with p-aminobenzoic acid (p-ABA), which allows the covalent immobilization of a gold nanoparticle-poly(amidoamine) (PAMAM) dendrimer nanocomposite (3D-Au-PAMAM). This scaffold was employed for the immobilization of the capture antibodies (CAbs). Detector antibodies labeled with horseradish peroxidase (HRP) and amperometric detection at - 0.20 V (vs. Ag pseudo-reference electrode) using the H

Edible electrochemical biosensors with remarkable prolonged resistance to extreme acidic conditions are described for direct glucose sensing in gastrointestinal (GI) fluids of different pH ranges and compositions. Such direct and stable glucose monitoring is realized using carbon-paste biosensors prepared from edible materials, such as olive oil and activated charcoal, shown to protect the activity of the embedded glucose oxidase (GOx) enzyme from strongly acidic conditions. The enzymatic resistance to low-pH deactivation allowed performing direct glucose monitoring in strong acidic environments (pH 1.5) over a 90-min period, while the response of conventional screen-printed (SP) biosensors decreased significantly following 10-min incubation in the same fluid. The developed edible biosensor displayed a linear response between 2 and 10 mM glucose with sensitivity depending on the pH of the corresponding GI fluid. In addition, coating the electrode surface with pH-responsive enteric coatings (Eudragit® L100 and Eudragit® E PO), of different types and densities, allows tuning the sensor activation in gastric and intestinal fluids at specific predetermined times. The attractive characteristics and sensing performance of these edible electrochemical biosensors, along with their pH-responsive actuation, hold considerable promise for the development of ingestible devices towards the biosensing of diverse target analytes after prolonged incubation in challenging body fluids. Graphical Abstract Edible biosensors allow direct electrochemical sensing in different gastrointestinal fluids and display remarkable prolonged resistance to extreme acidic conditions.

This short article reviews critically the latest advances, current trends, potentiality and existing challenges in electrochemical sensing of circulating biomarkers for early and minimally invasive diagnosis. The extensive literature in this field clearly demonstrates that electrochemical biosensors provide very interesting features and substantial advantages over more complex conventional strategies to perform, in a simple and rapid way, single or multiplexed determination of target biomarkers at low concentrations in minimally treated liquid biopsies, meeting also the requirements of point-of-care devices and applicability at different settings. Despite the numerous challenging issues to overcome before achieving the translation of these biosensing strategies into the clinic, the potentiality demonstrated so far for the accurate electrochemical determination of biomarkers at different molecular levels for early and non-invasive diagnosis permits to foresee they will take a privileged place together with the traditional methods in the clinical routine.

Transient polymeric coatings with a programmable transiency behavior are used for delayed exposure of fresh surfaces of multi-electrode sensor arrays at preselected times. Such delayed sensor actuation is shown to be extremely attractive for addressing severe biofouling characteristic of electrochemical biosensors in complex biofluids. Controlled coating dissolution and tunable sequential actuation of the individual sensing electrodes are achieved by tailoring the characteristics of the coating (density and thickness). The unique features offered by these delayed sensors allowed direct glucose monitoring in untreated blood and saliva samples over prolonged periods. This attractive delayed-sensor exposure concept, offering time-tunable sequential activation of multiple sensors with remarkable anti-biofouling properties, indicates considerable promise for operating sensors continuously in complex body fluids.

A sensitive and disposable amperometric immunosensor for Saccharomyces cerevisiae was constructed by using carbon screen-printed electrodes modified with propionic acid-functionalized graphene oxide as transduction element. The affinity-based biosensing interface was assembled by covalent immobilization of a specific polyclonal antibody on the carboxylate-enriched electrode surface via a water-soluble carbodiimide/N-hydroxysuccinimide coupling approach. A concanavalin A-peroxidase conjugate was further used as signaling element. The immunosensor allowed the amperometric detection of the yeast in buffer solution and white wine samples in the range of 10–107 CFU/mL. This electroanalytical device also exhibited low detection limit and high selectivity, reproducibility, and storage stability. The immunosensor was successfully validated in spiked white wine samples.

This work describes the first electrochemical immunosensor reported for the determination of IL-13 receptor Rα2 (IL-13Rα2), an emerging relevant biomarker in metastatic colon cancer. The approach involves the formation of sandwich immunocomplexes using specific capture (CAb) and biotinylated detector antibodies (BDAb) further labeled with an streptavidin-horseradish peroxidase (Strep-HRP) polymer, onto carboxylic acid-modified magnetic microbeads (HOOC-MBs). Amperometric detection at disposable carbon screen-printed electrodes (SPCEs) using the (H2O2)/hydroquinone (HQ) system was employed to monitor the affinity reactions. The developed immunosensor exhibits a linear calibration plot over the 3.9–100 ng mL−1 concentration range, a LOD of 1.2 ng mL−1 and excellent selectivity against other non-target proteins. The amperometric immunosensor was applied successfully to quantify for the first time the IL-13Rα2 expression in raw lysates of colon cancer cells and to discriminate the metastatic potential of intact cells through recognition of this target extracellular receptor. In comparison with the commercial Enzyme-Linked ImmunoSorbent Assay (ELISA) kit involving the same immunoreagents, the immunosensor provides a similar LOD in a half-time for the assay.

We report a rapid and sensitive electrochemical strategy for the detection of gene-specific 5-methylcytosine DNA methylation. Magnetic beads (MBs) modified with an antibody for 5-methylcytosines (5-mC) are used for the capture of any 5-mC methylated single-stranded (ss)DNA sequence. A flanking region next to the 5-mCs of the captured methylated ssDNA is recognized by hybridization with a synthetic biotinylated DNA sequence. Amperometric transduction at disposable screen-printed carbon electrodes (SPCEs) is employed. The developed biosensor has a dynamic range from 3.9 to 500 pm and a limit of detection of 1.2 pm for the methylated synthetic sequence of the tumor suppressor gene O-6-methylguanine-DNA methyltransferase (MGMT) promoter region. The method is applied in the 45-min analysis of specific methylation in the MGMT promoter region directly in raw spiked human serum samples and in genomic DNA extracted from U-87 glioblastoma cells and paraffin-embedded brain tumor tissues without any amplification and pretreatment step.

This paper describes the first immunosensor reported so far for the highly sensitive determination of the egg white allergen, ovomucoid (OM). The approach involves the selective capture of sandwich immunocomplexes formed by capture antibody-target protein allergen-HRP-labeled detector antibody onto carboxylic acid-functionalized magnetic beads (HOOC-MBs). The resulting magnetic bioconjugates were captured on the surface of disposable screen-printed carbon electrodes (SPCE) to perform amperometric detection at −0.20 V vs. the Ag pseudo-reference electrode in the presence of hydroquinone (HQ) and H2O2. The as prepared electrochemical immunoplatform showed a wide range of linearity (0.3–25 ng mL−1), a LOD of 0.1 ng mL−1, which is much lower than those claimed for commercial ELISA kits, and a great selectivity against other white egg allergenic proteins. The developed immunosensor was successfully employed for the simple and accurate determination of trace amounts of OM in unprocessed (eggs and wheat flour) and baked (bread) food samples.

This paper describes two different electrochemical affinity biosensing approaches for the simple, fast and bisulfite and PCR-free quantification of 5-methylated cytosines (5-mC) in DNA using the anti-5-mC antibody as biorecognition element. One of the biosensing approaches used the anti-5-mC as capture bioreceptor and a sandwich type immunoassay, while the other one involved the use of a specific DNA probe and the anti-5-mC as a detector bioreceptor of the captured methylated DNA. Both strategies, named for simplicity in the text as immunosensor and DNA sensor, respectively, were implemented on the surface of magnetic microparticles and the transduction was accomplished by amperometry at screen-printed carbon electrodes by means of the hydrogen peroxide/hydroquinone system. The resulting amperometric biosensors demonstrated reproducibility throughout the entire protocol, sensitive determination with no need for using amplification strategies, and competitiveness with the conventional enzyme-linked immunosorbent assay methodology and the few electrochemical biosensors reported so far in terms of simplicity, sensitivity and assay time. The DNA sensor exhibited higher sensitivity and allowed the detection of the gene-specific methylations conversely to the immunosensor, which detected global DNA methylation. In addition, the DNA sensor demonstrated successful applicability for 1 h-analysis of specific methylation in two relevant tumor suppressor genes in spiked biological fluids and in genomic DNA extracted from human glioblastoma cells. The financial support of the Spanish Ministerio de Economía y Competitividad CTQ2015-64402-C2-1-R and SAF2014-53209-R Research Projects, the PI17CIII/00045 research project from AESI and the NANOAVANSENS Program from the Comunidad de Madrid (S2013/MT-3029) and predoctoral contracts from the Spanish Ministerio de Economía y Competitividad (R.M. Torrente-Rodríguez and E. Povedano) and Universidad Complutense de Madrid (V. Ruiz-Valdepeñas Montiel) are also gratefully acknowledged. Sí

A sensitive amperometric immunosensor has been prepared by immobilization of capture antibodies onto gold nanoparticles (AuNPs) grafted on a screen-printed carbon electrode (SPCE) through aryl diazonium salt chemistry using 4-aminothiophenol (AuNPs-S-Phe-SPCE). The immunosensor was designed for the accurate determination of clinically relevant levels of B-type natriuretic peptide (BNP) in human serum samples. The nanostructured electrochemical platform resulted in an ordered layer of AuNPs onto SPCEs which combined the advantages of high conductivity and improved stability of immobilized biomolecules. The resulting disposable immunosensor used a sandwich type immunoassay involving a peroxidase-labeled detector antibody. The amperometric transduction was carried out at −0.20 V (vs the Ag pseudo-reference electrode) upon the addition of hydroquinone (HQ) as electron transfer mediator and H2O2 as the enzyme substrate. The nanostructured immunosensors show a storage stability of at least 25 days, a linear range between 0.014 and 15 ng mL−1, and a LOD of 4 pg mL−1, which is 100 times lower than the established cut-off value for heart failure (HF) diagnosis. The performance of the immunosensor is advantageously compared with that provided with immunosensors prepared by grafting SPCE with p-phenylendiamine (H2N-Phe-SPCE) and attaching AuNPs by immersion into an AuNPs suspension or by electrochemical deposition, as well as with immunosensors constructed using commercial AuNPs-modified SPCEs. The developed immunosensor was applied to the successful analysis of human serum from heart failure (HF) patients upon just a 10-times dilution as sample treatment., The financial support of projects: RetosColaboración RTC-2015- 4184-1 (cofinanced by the Ministry of Economy and Competitivity and FEDER “una manera de hacer Europa”), CTQ2015-70023-R and CTQ2015-64402-C2-1-R (Spanish Ministry of Economy and Competitivity Research Projects) and S2013/MT-3029 (NANOAVANSENS Program from the Comunidad de Madrid) are gratefully acknowledged. R.M. Torrente-Rodríguez acknowledges a predoctoral contract from the Spanish Ministerio de Economía y Competitividad.

Currently, electrochemical nucleic acid-based biosensing methodologies involving hybridization assays, specific recognition of RNA/DNA and RNA/RNA duplexes, and amplification systems provide an attractive alternative to conventional quantification strategies for the routine determination of relevant nucleic acids at different settings. A particularly relevant objective in the development of such nucleic acid biosensors is the design of as many as possible affordable, quick, and simple methods while keeping the required sensitivity. With this aim in mind, this work reports, for the first time, a thorough comparison between 11 methodologies that involve different assay formats and labeling strategies for targeting the same DNA. The assayed approaches use conventional sandwich and competitive hybridization assays, direct hybridization coupled to bioreceptors with affinity for RNA/DNA duplexes, multienzyme labeling bioreagents, and DNA concatamers. All of them have been implemented on the surface of magnetic beads (MBs) and involve amperometric transduction at screen-printed carbon electrodes (SPCEs). The influence of the formed duplex length and of the labeling strategy have also been evaluated. Results demonstrate that these strategies can provide very sensitive methods without the need for using nanomaterials or polymerase chain reaction (PCR). In addition, the sensitivity can be tailored within several orders of magnitude simply by varying the bioassay format, hybrid length or labeling strategy. This comparative study allowed us to conclude that the use of strategies involving longer hybrids, the use of antibodies with specificity for RNA/DNA heteroduplexes and labeling with bacterial antibody binding proteins conjugated with multiple enzyme molecules, provides the best sensitivity.