Search

The inadequate understanding of the mechanisms that reversibly convert molecular sulfur (S) into lithium sulfide (Li2S) via soluble polysulfides (PSs) formation impedes the development of high-performance lithium-sulfur (Li-S) batteries with non-aqueous electrolyte solutions. Here, we use operando small and wide angle X-ray scattering and operando small angle neutron scattering (SANS) measurements to track the nucleation, growth and dissolution of solid deposits from atomic to sub-micron scales during real-time Li-S cell operation. In particular, stochastic modelling based on the SANS data allows quantifying the nanoscale phase evolution during battery cycling. We show that next to nano-crystalline Li2S the deposit comprises solid short-chain PSs particles. The analysis of the experimental data suggests that initially, Li2S2 precipitates from the solution and then is partially converted via solid-state electroreduction to Li2S. We further demonstrate that mass transport, rather than electron transport through a thin passivating film, limits the discharge capacity and rate performance in Li-S cells. Understanding lithium sulfide's electrodeposition and stripping is key to developing practical Li-S batteries. Here, the authors demonstrate that the discharge product in Li-S batteries consists of nano-size solid polysulfide particles and nano-crystalline lithium sulfide. [ABSTRACT FROM AUTHOR]

This work describes the design and synthesis of a π‐conjugated telluro[3,2‐β][1]‐tellurophene‐based synthon that, embodying pyridyl and haloaryl chalcogen‐bonding acceptors, self‐assembles into nanoribbons through chalcogen bonds. The ribbons π‐stack in a multi‐layered architecture both in single crystals and thin films. Theoretical studies of the electronic states of chalcogen‐bonded material showed the presence of a local charge density between Te and N atoms. OTFT‐based charge transport measurements showed hole‐transport properties for this material. Its integration as a p‐type semiconductor in multi‐layered CuI‐based light‐emitting electrochemical cells (LECs) led to a 10‐fold increase in stability (38 h vs. 3 h) compared to single‐layered devices. Finally, using the reference tellurotellurophene congener bearing a C−H group instead of the pyridyl N atom, a herringbone solid‐state assembly is formed without charge transport features, resulting in LECs with poor stabilities (<1 h). [ABSTRACT FROM AUTHOR]

A series of non‐fullerene acceptors based on perylene monoimides coupled in the peri position through phenylene linkers were synthesized via Suzuki‐coupling reactions. Various substitution patterns were investigated using density functional theory (DFT) calculations in combination with experimental data to elucidate the geometry and their optical and electrochemical properties. Further investigations of the bulk properties with grazing incidence wide angle X‐ray scattering (GIWAXS) gave insight into the stacking behavior of the acceptor thin films. Electrochemical and morphological properties correlate with the photovoltaic performance of devices with the polymeric donor PBDB‐T and a maximum efficiency of 3.17 % was reached. The study gives detailed information about structure–property relationships of perylene‐linker‐perylene compounds. [ABSTRACT FROM AUTHOR]

Multiblock copolymers with charged blocks are complex systems that show great potential for enhancing the structural control of block copolymers. A pentablock terpolymer PMMA‐b‐PDMAEMA‐b‐P2VP‐b‐PDMAEMA‐b‐PMMA is investigated. It contains two types of midblocks, which are weak cationic polyelectrolytes, namely poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) and poly(2‐vinylpyridine) (P2VP). Furthermore, these are end‐capped with short hydrophobic poly(methyl methacrylate) (PMMA) blocks in dilute aqueous solution and thin films. The self‐assembly behavior depends on the degrees of ionization α of the P2VP and PDMAEMA blocks, which are altered in a wide range by varying the pH value. High degrees of ionization of both blocks prevent structure formation, whereas microphase‐separated nanostructures form for a partially charged and uncharged state. While in solutions, the nanostructure formation is governed by the dependence of the P2VP block solubility of the and the flexibility of the PDMAEMA blocks on α, in thin films, the dependence of the segregation strength on α is key. Furthermore, the solution state plays a crucial role in the film formation during spin‐coating. Overall, both the mixing behavior of the 3 types of blocks and the block sequence, governing the bridging behavior, result in strong variations of the nanostructures and their repeat distances. [ABSTRACT FROM AUTHOR]

The landscape of possible polymorphs for some metal–organic frameworks (MOFs) can pose a challenge for controlling the outcome of their syntheses. Demonstrated here is the use of a template to control in the vapor‐assisted formation of zeolitic imidazolate framework (ZIF) powders and thin films. Introducing a small amount of either ethanol or dimethylformamide vapor during the reaction between ZnO and 4,5‐dichloroimidazole vapor results in the formation of the porous ZIF‐71 phase, whereas other conditions lead to the formation of the dense ZIF‐72 phase or amorphous materials. Time‐resolved in situ small‐angle X‐ray scattering reveals that the porous phase is metastable and can be transformed into its dense polymorph. This transformation is avoided through the introduction of template vapor. The porosity of the resulting ZIF powders and films was studied by N2 and Kr physisorption, as well as positron annihilation lifetime spectroscopy. The templating principle was demonstrated for other members of the ZIF family as well, including the ZIF‐7 series, ZIF‐8_Cl, and ZIF‐8_Br. [ABSTRACT FROM AUTHOR]

In this work, we prepared oriented mesoporous thin films of silica on various solid substrates using the pluronic block copolymer P123 as a template. We attempted to insert guest iron oxide (FexOy) nanoparticles into these films by two different methods: (a) by co-precipitation—where iron precursors are introduced in the synthesis sol before deposition of the silica film—and subsequent oxide production during the film calcination step; (b) by preparing and calcining the silica films first then impregnating them with the iron precursor, obtaining the iron oxide nanoparticles by a second calcination step. We have examined the structural effects of the guest nanoparticles on the silica film structures using grazing incidence X-ray scattering (GISAXS), high-resolution transmission electron spectroscopy (HRTEM), spectroscopic ellipsometry, X-ray photoelectron spectroscopy (XPS), and Raman microscopy. Formation of nanoparticles by co-precipitation may induce substantial changes in the film structure leading, in our adopted process, to the appearance of lamellar ordering in the calcination stage. On the contrary, impregnation-based approaches perturb the film structures much more weakly, but are also less efficient in filling the pores with nanoparticles. [ABSTRACT FROM AUTHOR]

Two examples of phase transition in self-assembled mesostructured hybrid thin films are reported. The materials have been synthesized using tetraethoxysilane as the silica source hydrolyzed with or without the addition of methyltriethoxy­silane. The combined use of transmission electron microscopy, small-angle X-ray scattering and computer simulation has been introduced to achieve a clear identification of the organized phases. A structural study of the self-assembled mesophases as a function of thermal treatment has allowed the overall phase transition to be followed. The initial symmetries of mesophases in as-deposited films have been linked to those observed in samples after thermal treatment. The monodimensional shrinkage of silica films during calcination has induced a phase transition from face-centered orthorhombic to body-centered cubic. In hybrid films, instead, the phase transition has not involved a change in the unit cell but a contraction of the cell parameter normal to the substrate. [ABSTRACT FROM AUTHOR]

Innovative strategies to produce well-defined nanoparticles and other nanostructures such as nanofibres, quantum wells and mesoporous materials have revitalized materials science for the potential benefit to society. Here, we report a controlled process, involving soft-chemistry-based deposition, template-assisted mesostructured growth, and tuned annealing conditions that allows the preparation of ordered mesoporous crystalline networks and mesostructured nano-island single layers, composed of multicationic metal oxides having perovskite, tetragonal or ilmenite structures. This strategy to obtain meso-organized multi-metal-oxide nanocrystalline films (M3NF) bridges the gap between conventional mesoporous materials and the remarkable properties of crystalline ternary or quaternary metallic oxides. Nanocrystalline mesoporous films with controlled wall thickness (10–20 nm) of dielectric SrTiO3, photoactive MgTa2O6 or ferromagnetic semi-conducting CoxTi1−xO2−x were prepared by evaporation-induced self-assembly (EISA) using a specially designed non-ionic block-copolymer template. A tuned thermal treatment of the mesoporous films permits the transfer of the wall structure into nanocrystallites, with all tectonic units being tightly incorporated into mechanically stable ordered tri- or bidimensional nanocrystalline networks. This methodology should allow multifunctionalization, miniaturization and integration during development of devices such as smart sensors and actuators, better-performing photocatalysts, and fast electrochromic devices. On the other hand, organized arrays of dispersed ferromagnetic or ferroelectric nanoparticles are promising materials for spintronics and for cheap, non-volatile 'flash' memories. [ABSTRACT FROM AUTHOR]

Mesoporous materials bear great potential for biotechnological applications due to their biocompatibility and versatility. Their high surface area and pore interconnection allow the immobilization of molecules and their subsequent controlled delivery. Modifications of the mesoporous material with the addition of different chemical species, make them particularly suitable for the production of bioactive coatings. Functionalized thin films of mesoporous silica and titania can be used as scaffolds with properties as diverse as promotion of cell growth, inhibition of biofilms formation, or development of sensors based on immobilized enzymes. The possibility to pattern them increase their appeal as they can be incorporated into devices and can be tailored both with respect to architecture and functionalization. In fact, selective surface manipulation is the ground for the fabrication of advanced micro devices that combine standard micro/nanofluids with functional materials. In this review, we will present the advantages of the functionalization of silica and titania mesoporous materials deposited in thin film. Different functional groups used to modify their properties will be summarized, as well as functionalization methods and some examples of applications of modified materials, thus giving an overview of the essential role of functionalization to improve the performance of such innovative materials. [ABSTRACT FROM AUTHOR]

Nanostructured metal assemblies on thin and ultrathin polymeric films enable state of the art technologies and have further potential in diverse fields. Rational design of the structure–function relationship is of critical importance but aggravated by the scarcity of systematic studies. Here, we studied the influence of the interplay between metal and polymer surface free energy and reactivity on the evolution of electric conductivity and the resulting morphologies. In situ resistance measurements during sputter deposition of Ag, Au, Cu and Ni films on ultrathin reticulated polymer films collectively reveal metal–insulator transitions characteristic for Volmer–Weber growth. The different onsets of percolation correlate with interfacial energy and energy of adhesion weakly but as expected from ordinary wetting theory. A more pronounced trend of lower percolation thickness for more reactive metals falls in line with reported correlations. Ex situ grazing incidence small angle X-ray scattering experiments were performed at various thicknesses to gain an insight into cluster and film morphology evolution. A novel approach to interpret the scattering data is used where simulated pair distance distributions of arbitrary shapes and arrangements can be fitted to experiments. Detailed approximations of cluster structures could be inferred and are discussed in view of the established parameters describing film growth behavior. [ABSTRACT FROM AUTHOR]

Abstract: If mesoporous thin films (MTFs) are to be utilised in device applications it is important that we produce films which not only possess a single pore direction across large substrate areas (in the range of microns) but are also relatively defect free. In this paper we report the use of confining architectures in the form of topographically patterned rectangular section channels etched into native silicon substrates to promote ordering of the mesopores. We discuss the effects of the channels on films with different thicknesses. The film thickness is shown to be a critical parameter in defining highly orientated and defect-free films and the data demonstrate that it is possible to achieve a single mesoporous silica domain across macroscopic dimensions with thin film thicknesses of approximately 200nm but that critically pore order can be lost in ultra thin and thicker films produced by these methods. [Copyright &y& Elsevier]

Abstract: Mesoporous silica films with controlled porosity were utilized as the host matrices to prepare FeCo–SiO2 nanocomposites through an impregnation process. The mesoporous silica films were first impregnated with a solution containing Co(II) and Fe(III) ions and then submitted to a reduction treatment under H2 flow. FeCo nanocrystals growth took place inside the mesopores, and their monodisperse size was dictated only by the size of the mesopores. We illustrate this process by the use of two different silica film matrices having different pore size and mesophase symmetry as the templates for the growth of FeCo alloy nanocrystals. The films and the nanocomposite samples were investigated by grazing-incidence small-angle X-ray scattering, X-ray diffraction and transmission electron microscopy. Unimpregnated mesoporous silica samples before and after the same thermal reduction treatment were also studied in order to investigate the mesopore structure variation upon the reduction treatment. [Copyright &y& Elsevier]

Abstract: The thermal stability of anatase TiO2 mesoporous thin films has been considerably increased up to 800°C by substituting a fraction of Ti cations by Nb. Mesoporous mixed oxide films Ti1−x Nb x O2, with x =Nb/(Nb+Ti) ranging from 0 to 1, and homogeneous crystalline walls have been successfully prepared from chloride precursors and non-ionic block copolymer templates. They all exhibit a uniaxially distorted Im3m bcc mesostructure with the a lattice parameter ranging from 14 to 19nm. Films have been characterised by simultaneous in situ SAXS and WAXS investigations during thermal treatment. Transmission electron microscopy and UV–visible ellipsometry were used to confirm the structure, the porosity and the good optical quality. A high porosity of 40% (pore size estimated at 7nm) was maintained for the 10% Nb-doped films above the temperature of crystallisation and a bandgap of 3.40eV has been measured after annealing at 500°C. [Copyright &y& Elsevier]