Search

Fly ash (FA) from biomass combustion and biological sludge (S), both wastes from the pulp and paper industry, were granulated in different proportions (90% FA + 10% S, and 70% FA + 30% S w/w, dry weight basis, dw) and used to recover the functionality of soils affected by mining activities (Aljustrel, Iberian Pyrite Belt), with and without the application of municipal solid waste compost (MSWC). Application doses of both mixtures were 2.5, 5.0 and 10% (w/w, dw). These materials corrected soil acidity to circumneutral values and increased extractable P and K concentrations. A significant increase in soil organic matter (from 0.6 to 0.8–1.5% w/w, dw) and N content (from 0.04 to 0.09–0.12% w/w, dw) was also observed, but only when MSWC was applied. The soil was already heavily contaminated with Cu, Pb and Zn and the application of amendments did not increase their pseudo-total concentrations. The CaCl2 extractable fractions of both Cu and Zn decreased to very low values. The improvement in soil quality, compared to fertilizer only treatment, was further evidenced by the increase in some soil enzymatic activities (dehydrogenase, β-glucosidase and cellulase), with a better response for the granules with the higher proportion of biological sludge, as well as by the decrease in the soil-water extract toxicity towards different organisms (Daphnia magna, Thamnocephalus platyurus, and Pseudokirchneriella subcapitata). Agrostis tenuis germinated and grew during the first month only in the amended pots, but, after that, a considerable phytotoxic effect was evident. This was mainly attributed to salt stress or to some specific ionic toxicity. In conclusion, to establish a long-term plant cover in mining soils amended with biomass ash-based materials, the selection of plants with higher resistance to salinity and/or the stabilization of the amendments, to reduce their soluble salt content, is recommended.

Different alkaline residue materials (fly ash, green liquor dregs, and lime mud) generated from the pulp and paper industry as sealing materials were evaluated to cover aged mine waste tailings (

The goal of this research was to assess the potential of several industrial wastes to immobilise metals in two polluted soils deriving from an old Pb/Zn mine. Two different approaches were used to assess the performance of different amendments: a chemical one, using extraction by ethylenediaminetetraacetic acid (EDTA), and a biological one, using Lupinus albus as a bio-indicator. Four amendments were used: inorganic sugar production waste (named ‘sugar foam’, SF), sludge from a drinking water treatment sludge (DWS), organic waste from olive mill waste (OMW) and paper mill sludge (PMS). Amendment to soil ratios ranged from 0.1 to 0.3 (w/w). All the amendments were capable of significantly decreasing (p

Large areas of mine tailings are reclaimed by applying organic amendments such as paper mill sludge (PMS). Although mining industries can use PMS freshly generated by paper mills, operational constraints on paper industries make temporary landfilling of this material an unavoidable alternative for the paper industries, creating the most prominent PMS source for mining industries. This study aimed to quantify soil greenhouse gas (GHG) emissions (N2O, CO2, and CH4) after application of landfilled PMS (LPMS; i.e., excavated from a landfill site at a paper mill) and LPMS combined with a seeding treatment of white clover (Trifolium repens L.) on nonacidic mine tailings site prior to reforestation. Soil N2O, CO2, and CH4 fluxes were measured after applications of 50 and 100 Mg dry LPMS ha−1 during two consecutive snowfree seasons on two adjacent sites; LPMS was applied once in the first season. The LPMS application increased N2O emissions (7.6 to 34.7 kg N2O-N ha−1, comprising 1.04 to 2.43% of applied N) compared with the unamended control during the first season; these emissions were negligible during the second season. The LPMS application increased CO2 emissions (~5800 to 11,400 kg CO2–C ha−1, comprising 7 to 27% of applied C) compared with the unamended control on both sites and in both seasons. Fluxes of CH4 were negligible. White clover combined with LPMS treatments did not affect soil GHG emissions. These new GHG emission factors should be integrated into life-cycle analyses to evaluate the C footprint of potential symbioses between the mining and paper industries. Future research should focus on the effect of PMS applications on soil GHG emissions from a variety of mine tailings under various management practices and climatic conditions to plan responsible and sustainable land reclamation.

Aided phytostabilization is a technology that uses metal tolerant plants and organic and/or inorganic amendments to reduce soil metal bioavailability, while improving soil health. Our objective was to determine the effects of the application of amendments [sheep manure (SHEEP), poultry litter (POULTRY), cow slurry (COW), and paper mill sludge mixed with poultry litter (PAPER)], together with the growth of a metallicolous Festuca rubra L. population, on (i) chemical and microbial indicators of soil health and (ii) soil ecotoxicity, during the aided phytostabilization of a Zn/Pb contaminated mine soil. Amendment application led to an increase in soil pH, organic matter content, and inorganic salts, resulting in a decrease in Pb and Zn CaCl2-extractable concentrations in soil, which, in turn, contributed to lower ecotoxicity and a stimulation of plant growth and soil microbial communities. The factor most affecting the metal extractability was probably soil pH. POULTRY was the best amendment in terms of increasing plant growth, chlorophylls content, and soil microbial biomass and activity, but resulted in higher levels of phytoavailable Pb and Zn. SHEEP and PAPER were more effective at reducing metal CaCl2-extractability and, consequently, led to lower values of metal accumulation in plant tissues, thereby reducing the risk of metals entering into the food chain. When combined with the application of organic amendments, the metallicolous F. rubra population studied here appears an excellent candidate for aided phytostabilization. Our results indicate that the application of organic amendments is essential for the short-term recovery of highly contaminated metalliferous soils during aided phytostabilization.

The paper industry has a relatively high degree of reliance on suppliers when compared to other industries. Exploring the role of the paper industry in terms of consumption of intermediate inputs from other industries may help to understand how the production of paper does not only generate waste by itself but also affects the amount of waste generated by other industries. The product Life Cycle Assessment (LCA) is a useful analytical tool to examine and assess environmental impacts over the entire life cycle of a product “from cradle to grave” but it is costly and time intensive. In contrast, Economic Input Output Life Cycle Assessment Models (IO-LCA) that combine LCA with Input–Output analysis (IO) are more accurate and less expensive, as they employ publicly available data. This paper represents one of the first Spanish studies aimed at estimating the waste generated in the production of paper by applying IO-LCA. One of the major benefits is the derivation of the contribution of direct and indirect suppliers to the paper industry. The results obtained show that there was no direct relationship between the impact on output and the impact on waste generation exerted by the paper industry. The major contributors to waste generation were the mining industry and the forestry industry.

In this study, four ten years test areas with covered tailings were geochemically evaluated. Three areas were covered with a fly ash and an overlying sludge layer, and one only with a sludge cover, originating from paper mills. The accumulation of As, Fe and Pb in sludge layers, originating from air-borne dust and the depletion of K, Na and P from both cover layers were observed. High release of elements from tailings was observed in the comparison profile due to oxidation and weathering of tailings. In only sludge covered area, the leaching of elements from tailings decreased. In the profiles with thin ash (20 cm and 30 cm), most elements were retained in tailings with pH 7–9. In the profile with the thickest ash (50 cm), elements such as As, Cd, Cu, Mg, Mn, Pb, S and Zn were depleted in the uppermost tailings with pH above 11 and retained deeper in the zone with pH 7–8, which implied that large quantities of fly ash increased the oxidation and weathering of tailings and mobility of elements. Elements excluding K, never reached the groundwater in high concentrations in the covered areas, while the comparison area had high Ca, K, Mn and S concentrations.

Sealing layers made of two alkaline paper mill by-products, fly ash and green liquor dregs, were placed on top of 50-year-old sulfide-containing tailings as a full-scale remediation approach. The performance and effectiveness of the sealing layers with high water content for an oxygen barrier and low hydraulic conductivity for a sealing layer in preventing the formation of acid rock drainage were evaluated 5 years after the remediation. The leaching behavior of the covered tailings was studied using batch leaching tests (L/S ratio 10 L/kg). The leaching results revealed that, in general, the dregs- and ash-covered tailings released relatively lower concentrations of many elements contained in acid rock drainage compared to those from the uncovered tailings. A change in the chemical composition and mineralogical state of the tailings was observed for the tailings beneath the covers. The increase in pH caused by the alkaline materials promoted metal precipitation. Geochemical modeling using PHREEQC confirmed most of the geochemical changes of the covered tailings. Both the ash and dregs showed potential to function as sealing materials in terms of their geochemical properties. However, mobilization of Zn and Ni from the lower part of the dregs-covered tailings was observed. The same phenomenon was observed for the lower part of the ash-covered tailings. Ash showed advantages over dregs as a cover material; based on geochemical studies, the ash immobilized more elements than the dregs did. Lysimeters were installed below the sealing layers, and infiltrating water chemistry and hydrology were studied to monitor the amount and quality of the leachate percolating through.

This report is a synthesis of the technical assistance (TA) and recommendations, carried out by the World Bank water and sanitation program (WSP) since September 2014. To achieve the target of 100 percent improved sanitation, there is a national drive to improve fecal sludge management (FSM). This TA recognizes that to achieve the goals it is necessary to support the development of national FSM policies, regulations, and guidelines, while also improving capacity at the local level by supporting the implementation of improved FSM models in target cities. The objective of the TA was to provide government with tested advice on how to scale up improved septage management nationwide through: (i) improvement of septage management in three cities through the application of new management models (local level); and (ii) assistance to national government in training and capacity building and the formulation of policies and regulations to improve septage management at scale (national level). This report is structured as follows: chapter one is the executive summary; chapter two gives the background to sanitation in Indonesia and to fecal sludge management in particular; chapter three provides an overview of the TA approach; chapter four gives details of the implementation of the TA; chapter five summarizes the lessons learned; and chapter six outlines the recommendations and next steps.

Objective Prostate cancer continues to be the most commonly diagnosed cancer in men, and there is limited knowledge on its preventable risk factors. A number of occupational exposures in natural resource-based industries are suspected to be related to prostate cancer risk. This study investigates associations between employment in these industries and prostate cancer. Methods Data were from a population-based, case–control study previously conducted in Northeastern Ontario. Incident cases (N=760) aged 45–85 years and diagnosed with prostate cancer between 1995 and 1998 were identified from the Ontario Cancer Registry. Controls (N=1632) were recruited using telephone listings, and were frequency matched to cases by age. Lifetime occupational history was collected for all participants. Logistic regression was used to estimate ORs and their associated 95% CIs. Results Elevated risks were observed for employment in forestry and logging industries (OR=1.87, 95% CI 1.32 to 2.73) and occupations (OR=1.71, 95% CI 1.24 to 2.35), and these risks increased with duration of employment for ≥10 years. Elevated risks were also found for employment in wood products industries (OR=1.45, 95% CI 1.07 to 1.97), and paper and allied products industries (OR=1.43, 95% CI 1.03 to 2.00), and when duration of employment was ≥10 years. There were also elevated risks in agriculture and mining-related work; however, these findings were not consistent across industry and occupation categories. Conclusions Prostate cancer risk may be associated with work in several natural resource industries, primarily in the forest industries. To further evaluate observed associations, studies should focus on natural resource-based exposures in larger populations with improved exposure assessment.

This paper analyzes the socioeconomic, fiscal, and governance impact of gold mining in Mali. The analysis finds that, at the national level, mining plays an important role by contributing to export earnings and overall government fiscal revenue. In 2013, the mining sector represented 7 percent of gross domestic product, contributed 1.5 percent to growth in total gross domestic product, and accounted for 65 percent of total export earnings and 25 percent of total government budget revenues. At the local level, despite higher population growth, there is some evidence that outcomes (poverty and infrastructure services) are marginally better in mining communes compared with non-mining communes. Local governments receive fiscal windfalls that are spent significantly on education capital expenditures and current expenditures (salaries and non-salaries). Non-salary current expenditures are 10 times higher in mining areas. Analysis of the political economy of public service provision at the local level suggests that technical or absorptive capacities may be the bottleneck to increasing the local benefit of mining instead of corruption or accountability.

Paper mills generate large amounts of solid waste consisting of fibrous cellulose, clay, and lime. Paper mill Sludge (PMS) can improve reclamation of surface-coal mines where low pH and organic-carbon levels in the spoil cover material can inhibit revegetation. When applied at high rates, however, PMS may adversely impact the quality of surface runoff. Therefore, we applied PMS at 0, 224, and 672 dry Mg ha{sup -1} to 22.1 x 4.6-m plots at a recently mined site and monitored runoff for a total of 13 mo. The zero-rate plots served as controls and received standard reclamation consisting of mulching with hay and fertilization at planting. Compared to the control plots, PMS reduced runoff fourfold to sixfold and decreased erosion from 47 Mg ha{sup -1} to < 1 Mg ha{sup -1}. Most of the reduction occurred in the 2.5 mo before the plots were planted. Flow-weighted average dissolved oxygen concentrations in runoff from plots at the 224 and 672 Mg ha{sup -1} rates, however, were much lower ({

The new "Hazardous Waste Management Regulation" was published in the Official Newspaper of the Chilean Republic on 12 June 2003, being in force 365 days after its publication (i.e., 12 June 2004). During the next 180 days after its publication (i.e., until 12 December 2004), each industrial facility was obligated to present a "Hazardous Waste Management Plan" if the facility generates more than 12 ton/year hazardous wastes or more than 12 kg/year acute toxic wastes. Based on the Chilean industrial figures and this new regulation, hazardous waste management plans were carried out in three facilities of the most important sectors of Chilean industrial activity: a paper production plant, a Zn and Pb mine and a sawmill and wood remanufacturing facility. Hazardous wastes were identified, classified and quantified in all facilities. Used oil and oil-contaminated materials were determined to be the most important hazardous wastes generated. Minimization measures were implemented and re-use and recycling options were analyzed. The use of used oil as alternative fuel in high energy demanding facilities (i.e., cement facilities) and the re-refining of the used oil were found to be the most suitable options. In the Zn and Pb mine facility, the most important measure was the beginning of the study for using spent oils as raw material for the production of the explosives used for metals recovery from the rock. In Chile, there are three facilities producing alternative fuels from used oil, while two plants are nowadays re-refining oil to recycle it as hydraulic fluid in industry. In this sense, a proper and sustainable management of the used oil appears to be promissory.

A greenhouse study was undertaken to determine the suitability of adding papermill sludge to neutral/alkaline gold mine tailings to improve the establishment of Festuca rubra, Agropyron trachycaulum and Medicago sativa. Festuca rubra root and shoot biomass and A. Trachycaulum shoot biomass were increased with papermill sludge amendment. The addition of papermill sludge and fertilizer drastically increased the shoot and root biomass of M. sativa (20-30 times) while A. trachycaulum and F. rubra showed a more moderate increase in growth. Photosynthetic pigment content of the leaves was higher in papermill sludge treatments than in the treatments without papermill sludge. The organic carbon content, macro-aggregate content and field capacity of the gold mine tailings were increased while the bulk density was decreased by the addition of papermill sludge. This study suggests that addition of papermill sludge and adequate fertilization can alleviate some of the adverse conditions of neutral/alkaline gold mine tailings.

Deinking by-products from paper recycling have been used as cover materials on acid-producing tailings. Due to residual cellulose, anaerobic degradation leads to the production of an organic-rich leachate, which may percolate through the tailings. This study aims at describing the influence of the tailings' characteristics on the attenuation of organic matter in leachate and at discussing the degradation mechanisms. To this end, leachate was mixed with different types of tailings, including three unoxidized tailings with varying acid generation potentials and one tailing in three states of oxidation. Regularly, selected biochemical parameters were analyzed to access the evolution of organic components. The results show that when leachate from deinking by-products was placed in contact with tailings, phase and acid-base balance reactions took place in the beginning. Subsequently, oxidation-reduction reactions dominated the chemistry of the system. The type, the constituents, and the state of oxidation of the mine tailings condition the mechanisms of biodegradation of organic components. Methanogenesis was predominant in the control sample (pure organic leachate) but was absent in all leachate-tailings mixtures. No biodegradation was observed in the liquid phase for oxidized tailings and the organic concentration remained constant for unoxidized tailings, independently of the acid-generation potential. The biodegradation efficiency was optimal when the leachate was in contact with a mixture of oxidized and unoxidized tailings due to sulfate-reduction.

This study examined the relative sensitivities of seven commonly used indices of stream benthic community composition and three multivariate indices to effects associated with mines, pulp and paper mills, and urbanization. The indices included total abundance, number of taxa, diversity (H'), evenness, Hilsenhoff's biotic index (HBI), the BioMAP water quality index (WQI), the percent model affinity (PMA), and the first three ordination axes from a correspondence analysis. The second objective of the study was to determine the degree of redundancy among these indices. Six data sets (two from each of the three types of development) were used to address the objectives. In each data set, replicate benthic samples were collected from reference areas as well as one or more downstream areas exposed to a point-source or non-point-source discharge. The PMA approach and the ordination axes indicated significant differences between the reference and downstream communities for all six data sets (p0.05). With the exception of H', each of the other metrics revealed significant effects associated with one or two, but not all three, types of development. For example, the HBI and WQI indicated significant effects associated with pulp and paper mills and urbanization, but not mining. In all studies, effect sizes (i.e., the standardized difference between means for the reference and exposed areas expressed in units of standard deviations [SDs]) exceeded 2 SDs. However, effect sizes for the PMA and the first or second ordination axis scores were generally larger than effect sizes for the other metrics, indicating that these indices were often the most sensitive indicators of development. In addition, a high degree of redundancy was found among the various metrics, perhaps because the effects were large (i.e.,2 SDs). The greater sensitivity of the ordination axes and the PMA approach emphasizes their value as indices of benthic community composition. As a result, we recommend that any suite of indices used for assessing benthic communities should include these types of multivariate metrics.

In Canada, Environmental Effects Monitoring (EEM) programs exist within two regulations: the Pulp and Paper Effluent Regulations and the new Metal Mining Effluent Regulations under the Canadian Fisheries Act. EEM provides a biological, effects-based feedback loop to assess the effectiveness of technology-based regulations in protecting receiving environments. The promulgation of the Pulp and Paper Effluent Regulations, in 1992, represented a significant step forward in the Canadian regulatory approach by incorporating directly into a regulation a requirement to assess the effects of effluent discharges on receiving environments using proven scientific monitoring methodologies. Similarly, an assessment of the aquatic impacts of mines resulted in recommendations to amend the Metal Mining Effluent Regulations, recently promulgated in 2002, and includes an EEM program as a science-based feedback loop. As such, these regulations recognize the possibility that national, technology-based standards may not necessarily protect all receiving environments because of the diversity and variability of both discharges and receiving sites across the country. Since that time, EEM has improved its flexibility by considering both advances in science and the uniqueness of monitoring sites across Canada to allow the most appropriate and cost-effective monitoring approaches at each site while maintaining national consistency. This paper discusses the use of monitoring under two Canadian regulations to assess effects on aquatic ecosystems. As well, the National EEM approach to maintaining up-to-date scientific practices in a national regulatory program is discussed using examples.