Search

The realization of four-fold anisotropic magnetoresistance (AMR) in novel 3d-5d heterostructures has boosted major efforts in antiferromagnetic spintronics. However, despite the potential of incorporating strong spin-orbit coupling, only small AMR signals have been detected thus far, prompting a search for new mechanisms to enhance the signal. In this study on CaMnO3/CaIrO3 heterostructures, we report a unique dual-four-fold symmetric 70% AMR; a signal two orders of magnitude larger than previously observed in similar systems. We find that one order is enhanced by tuning a large biaxial anisotropy through octahedral tilts of similar sense in the constituent layers, while the second order is triggered by a spin-flop transition in a nearly Mott-type phase. Dynamics between these two phenomena as evidenced by the step-like AMR and a superimposed biaxial-anisotropy-induced AMR capture a subtle interplay of pseudospin coupling with the lattice and external magnetic field. Our study shows that a combination of charge-transfer, interlayer coupling, and a spin-flop transition can yield a giant AMR relevant for sensing and antiferromagnetic memory applications.

We report the influence of static mechanical deformation on the zero-field splitting of silicon vacancies in silicon carbide at room temperature. We use AlN/6H-SiC heterostructures deformed by growth conditions and monitor the stress distribution as a function of distance from the heterointerface with spatially-resolved confocal Raman spectroscopy. The zero-field splitting of the V1/V3 and V2 centers in 6H-SiC, measured by optically-detected magnetic resonance, reveal significant changes at the heterointerface compared to the bulk value. This approach allows unambiguous determination of the spin-deformation interaction constant, which turns out to be $0.75 \, \mathrm{GHz}$ for the V1/V3 centers and $0.5 \, \mathrm{GHz}$ for the V2 centers. Provided piezoelectricity of AlN, our results offer a strategy to realize the on-demand fine tuning of spin transition energies in SiC by deformation., Comment: 13 pages, 3 figures

We grow AlN/4H-SiC and AlN/6H-SiC heterostructures by physical vapor deposition and characterize the heterointerface with nanoscale resolution. Furthermore, we investigate the spatial stress and strain distribution in these heterostructures using confocal Raman spectroscopy. We measure the spectral shifts of various vibrational Raman modes across the heterointerface and along the entire depth of the 4H- and 6H-SiC layers. Using the earlier experimental prediction for the phonon-deformation potential constants, we determine the stress tensor components in SiC as a function of the distance from the AlN/SiC heterointerface. In spite that the lattice parameter of SiC is smaller than that of AlN, the SiC layers are compressively strained at the heterointerface. This counterintuitive behavior is explained by different coefficients of thermal expansion of SiC and AlN when the heterostructures are cooled from growth to room temperature. The compressive stress values are maximum at the heterointerface, approaching one GPa, and relaxes to the equilibrium value on the scale of several tens of microns from the heterointerface., Comment: 19 pages, 6 figures, 3 table

The correlation-driven Mott transition is commonly characterized by a drop in resistivity across the insulator-metal phase boundary; yet, the complex permittivity provides a deeper insight into the microscopic nature. We investigate the frequency- and temperature-dependent dielectric response of the Mott insulator $\kappa$-(BEDT-TTF)$_{2}$-Cu$_2$(CN)$_3$ when tuning from a quantum spin liquid into the Fermi-liquid state by applying external pressure and chemical substitution of the donor molecules. At low temperatures the coexistence region at the first-order transition leads to a strong enhancement of the quasi-static dielectric constant $\epsilon_1$ when the effective correlations are tuned through the critical value. Several dynamical regimes are identified around the Mott point and vividly mapped through pronounced permittivity crossovers. All experimental trends are captured by dynamical mean-field theory of the single-band Hubbard model supplemented by percolation theory., Comment: 6 pages, 4 figures

We measured the optical reflectivity of the Dirac material Au$_{2}$Pb in a broad frequency range (30 - 48 000 cm$^{-1}$) for temperatures between 9 and 300 K. The optical conductivity, computed from the reflectivity, is dominated by free-carrier contributions from topologically trivial bulk bands at all temperatures. The temperature-independent total plasma frequency of these carriers is 3.9 $\pm$ 0.2 eV. Overall, optical response of Au$_{2}$Pb is typically metallic with no signs of localization and bad-metal behavior., Comment: 10 pages, IOP style

We investigated the structure-property relationship of Co$_2$MnSi Heusler thin films upon the irradiation with He$^+$ ions. The variation of the crystal structure with increasing ion fluence has been probed using nuclear magnetic resonance (NMR) and transmission electron microscopy (TEM), and associated with the corresponding changes of the magnetic behavior. A decrease of both the structural order and the moment in saturation is observed. Specifically, we detect a direct transition from a highly $L2_1$-ordered to a fully $A2$-disordered structure type and quantify the evolution of the $A2$ structural contribution as a function of ion fluence. Complementary TEM analysis reveals a spatially-resolved distribution of the $L2_1$ and $A2$ phases showing that the $A2$ disorder starts at the upper part of the films. The structural degradation in turn leads to a decreasing magnetic moment in saturation in response to the increasing fluence., Comment: 9 pages, 5 figures

Presently, silicon photonics requires photodetectors that are sensitive in a broad infrared range, can operate at room temperature, and are suitable for integration with the existing Si-technology process. Here, we demonstrate strong room-temperature sub-band-gap photoresponse of photodiodes based on Si hyperdoped with tellurium. The epitaxially recrystallized Te-hyperdoped Si layers are developed by ion implantation combined with pulsed-laser melting and incorporate Te-dopant concentrations several orders of magnitude above the solid solubility limit. With increasing Te concentration, the Te-hyperdoped layer changes from insulating to quasi-metallic behavior with a finite conductivity as the temperature tends to zero. The optical absorptance is found to increase monotonically with increasing Te concentration and extends well into the mid-infrared range. Temperature-dependent optoelectronic photoresponse unambiguously demonstrates that the extended infrared photoresponsivity from Te-hyperdoped Si p-n photodiodes is mediated by a Te intermediate band within the upper half of the Si band gap. This work contributes to pave the way toward establishing a Si-based broadband infrared photonic system operating at room temperature., Comment: 18 pages, 7 figures

The great possibilities for strain engineering in core/shell nanowires have been explored as an alternative route to tailor the properties of binary III-V semiconductors without changing their chemical composition. In particular, we demonstrate that the GaAs core in GaAs/In(x)Ga(1-x)As or GaAs/In(x)Al(1-x)As core/shell nanowires can sustain unusually large misfit strains that would have been impossible in conventional thin-film heterostructures. The built-in strain in the core can be regulated via the composition and the thickness of the shell. Thick enough shells become almost strain-free, whereas the thin core undergoes a predominantly-hydrostatic tensile strain, which causes the reduction of the GaAs band gap energy. For the highest strain of 7 % in this work (obtained for x=0.54), a remarkable reduction of the band gap by 40 % was achieved in agreement with theoretical calculations. Such strong modulation of its electronic properties renders GaAs suitable for near-infrared nano-photonics and presumably high electron mobility nano-transistors., Comment: 12 pages, 4 figures

The optical properties of (001)-oriented NbP single crystals have been studied in a wide spectral range from 6 meV to 3 eV from room temperature down to 10 K. The itinerant carriers lead to a Drude-like contribution to the optical response; we can further identify two pronounced phonon modes and interband transitions starting already at rather low frequencies. By comparing our experimental findings to the calculated interband optical conductivity, we can assign the features observed in the measured conductivity to certain interband transitions. In particular, we find that transitions between the electronic bands spilt by spin-orbit coupling dominate the interband conductivity of NbP below 100 meV. At low temperatures, the momentum-relaxing scattering rate of the itinerant carriers in NbP is very small, leading to macroscopic characteristic length scales of the momentum relaxation of approximately 0.5 $\mu$m., Comment: 7.5 pages

We investigate the correlation between roughness, remanence and coercivity in Co/Ni films grown on Cu seed layers of varying thickness. Increasing the Cu seed layer thickness of Ta/Cu/8x[Co/Ni] thin films increases the roughness of the films. In-plane magnetization loops show that both the remanance and coercivity increase with increasing seed layer roughness. Polar Kerr microscopy and magnetic force microscopy reveal that the domain density also increases with roughness. Finite element micromagnetic simulations performed on structures with periodically modulated surfaces provide further insight. They confirm the connection between domain density and roughness, and identify the microsocpic structure of the domain walls as the source of the increased remanence in rough films. The simulations predict that the character of the domain walls changes from Bloch-like in smooth films to N\'eel-like for rougher films.

Hyper doping Si with up to 6 at.% Ti in solid solution was performed by ion implantation followed by pulsed laser annealing and flash lamp annealing. In both cases, the implanted Si layer can be well recrystallized by liquid phase epitaxy and solid phase epitaxy, respectively. Cross-sectional transmission electron microscopy of Ti-implanted Si after liquid phase epitaxy shows the so-called growth interface breakdown or cellular breakdown owing to the occurrence of constitutional supercooling in the melt. The appearance of cellular breakdown prevents further recrystallization. However, the out-diffusion and cellular breakdown can be effectively suppressed by solid phase epitaxy during flash lamp annealing due to the high velocity of amorphous-crystalline interface and the low diffusion velocity for Ti in the solid phase., Comment: 10 pages, 4 figures

The electronic band structure of the (Ga,Mn)As system has been one of the most intriguing problems in solid state physics over the past two decades. Determination of the band structure evolution with increasing Mn concentration is a key issue to understand the origin of ferromagnetism. Here we present room temperature photoluminescence and ellipsometry measurements of Ga_{100%-x}Mn_{x}As alloy. The up-shift of the valence-band is proven by the red shift of the room temperature near band gap emission from the Ga_{100%-x}Mn_{x}As alloy with increasing Mn content. It is shown that even a doping by 0.02 at.% of Mn affects the valence-band edge and it merges with the impurity band for a Mn concentration as low as 0.6 at.%. Both X-ray diffraction pattern and high resolution cross-sectional TEM images confirmed full recrystallization of the implanted layer and GaMnAs alloy formation., Comment: 24 pages, 7 figures, accepted at Phys. Rev. B 2015

The manganese induced magnetic, electrical and structural modification in InMnP epilayers, prepared by Mn ion implantation and pulsed laser annealing, are investigated in the following work. All samples exhibit clear hysteresis loops and strong spin polarization at the Fermi level. The degree of magnetization, the Curie temperature and the spin polarization depend on the Mn concentration. The bright-field transmission electron micrographs show that InP samples become almost amorphous after Mn implantation but recrystallize after pulsed laser annealing. We did not observe an insulator-metal transition in InMnP up to a Mn concentration of 5 at./%. Instead all InMnP samples show insulating characteristics up to the lowest measured temperature. Magneotresistance results obtained at low temperatures support the hopping conduction mechanism in InMnP. We find that the Mn impurity band remains detached from the valence band in InMnP up to 5 at./% Mn doping. Our findings indicate that the local environment of Mn ions in InP is similar to GaMnAs, GaMnP and InMnAs, however, the electrical properties of these Mn implanted III-V compounds are different. This is one of the consequences of the different Mn binding energy in these compounds., Comment: 21 pages, 8 figures, to be published at J. Appl. Phys