Search

An enantioselective [4+1] spiroannulation of α-bromo-β-naphthols with azoalkenes has been developed for the one-step construction of a new class of pyrazoline-based spirocyclic molecules. Using chi...

The density, conductivity, and viscosity of the 1,3-dimethyl-2-imidazolinone and lithium nitrate (DMI– LiNO3) solvated ionic liquid were measured as a function of temperature. Additionally, the electrochemical mechanism and electrodeposition of neodymium from the DMI–LiNO3 solvated ionic liquid were investigated. Cyclic voltammetry results indicate that the electrochemical reduction of Nd(III) is irreversible and proceeds via one-step with three-electron transfer, which is controlled by diffusion with a diffusion coefficient of 5.08×10−8 cm2/s. Energy- dispersive X-ray spectrometry and X-ray photoelectron spectroscopy data confirm that the electrodeposit obtained after electrodeposition at −4 V (vs Ag) using the DMI–LiNO3–Nd(CF3SO3)3 solvated ionic liquid contains metallic neodymium.

Here, we investigate the role of SmERF73, a group VII ETHYLENE RESPONSE FACTOR stress response transcription factor, in the regulation of post-modification of the skeleton precursors of diterpene tanshinones in Salvia miltiorrhiza. Most genes found to be involved in tanshinone biosynthesis are located on chromosome 6, and five of these genes comprise a large gene cluster in S. miltiorrhiza. We found that SmERF73 overexpression in S. miltiorrhiza coordinately up-regulated the transcription of seven tanshinone biosynthetic genes, four of which were located in the tanshinone gene cluster, consequently increasing tanshinone accumulation, while SmERF73 silencing reduced corresponding gene transcription and tanshinone accumulation. SmERF73 recognizes GCC-box promoter elements of four tanshinone-associated genes (DXR1, CPS1, KSL1 and CYP76AH3) and activates their expression. Moreover, SmERF73 and its targets were up-regulated by stress elicitors; SmERF73 appears to be at least partly mediated by the jasmonic acid (JA) signaling pathway via interaction with SmJAZ3. SmERF73 coordinately regulates tanshinone biosynthetic gene expression, suggesting a potential link between tanshinone production and plant stress responses.

The separation of C2 H2 from C2 H4 is one of the most challenging tasks due to the similarity of their physical properties. In addition, green synthetic protocol and adsorbent's stability are also the major concerns during the separation. Herein, under hydrothermal green synthesis conditions, an ultrastable ultramicroporous Zn-MOF was designed and synthesized with a high yield. The pore diameter of the Zn-MOF is 3.6 A, which lies in between the diameters of C2 H2 (3.3 A) and C2 H4 (4.2 A) molecules, leading to an efficient separation of the C2 H2 /C2 H4 mixtures by the sieving effect. The practical separation performance of C2 H2 /C2 H4 was confirmed by the dynamic breakthrough experiments. Moreover, the high stability enables the adsorption capacity of the Zn-MOF to C2 H2 , which can be maintained under a wide range of pH (1-13). Molecular simulations were also performed to identify the different C2 H2 - and C2 H4 -binding sites in Zn-MOF.

Objective The aim of this study was to determine the clinical outcomes and long-term stability of individualized titanium mesh combined with free flap for orbital floor reconstruction after maxillectomy and to identify the risk factors for titanium mesh exposure. Material and methods The data of 66 patients who underwent maxillectomy and orbital floor defect reconstruction by individualized titanium mesh in Peking University School and Hospital of Stomatology between 2011 and 2019 were retrospectively reviewed. Postoperative ophthalmic function and success of aesthetic restoration were assessed. Titanium mesh exposure was recorded and the risk factors were identified. Results Mean follow-up was for 24.8 months (range, 6-92 months). Ophthalmic function was successfully restored in 63/66 patients. Aesthetic restoration was not considered satisfactory by 10 patients. Titanium mesh exposure occurred in six patients (exposure rate, 9.1%). Preoperative radiotherapy was identified as an independent risk factor for mesh exposure (OR = 28.8, P = 0.006). Previous surgery, postoperative radiotherapy, pathological type of the primary lesion, the type of tissue flap applied, and the use of intraoperative navigation were not significant risk factors. Six patients with titanium mesh exposure underwent second surgery, but mesh exposure recurred in two patients due to insufficient soft tissue coverage. Conclusion Individualized titanium mesh with free flap can effectively restore maxilla-orbital defects. Preoperative radiotherapy is an independent predictor of postoperative titanium mesh exposure. Adequate soft tissue coverage of the mesh may reduce the risk of mesh exposure. Level of evidence Level 4 (case-control study) Laryngoscope, 2021.

A new porous metal–organic framework (MOF) {[Cd(Hbptc)]·H2O}n (Cdbptc) was assembled by Cd(II) ions and a rigid (1,1′-biphenyl)-2,4,6-tricarboxylic acid (H3bptc) ligand via a solvothermal method. C...

The two functional fluorinated ligands 2-fluoro-4-(1H-tetrazol-5-yl)benzoic acid (2-F-H2tzba) and 3-fluoro-4-(1H-tetrazol-5-yl)benzoic acid (3-F-H2tzba) were obtained by modifying 4-(1H-tetrazol-5-...

An unusual flower and tendril (uft) mutant in cucumber was caused by a mutation in Csa1G056950 encoding an F-box protein. Flowers and tendrils are important agronomic and yield traits of cucumber (Cucumis sativus L.). In this study, we identified an unusual flower and tendril (uft) mutant from an ethyl methanesulfonate (EMS) mutagenesis population. Genetic analysis revealed that the phenotype of the uft mutant was regulated by a single recessive nuclear gene. Map-based cloning and MutMap+ results demonstrated that Csa1G056950 (CsUFO), encoding an F-box protein, was the causal gene for the uft mutant phenotype of cucumber. A single nucleotide polymorphism (SNP) mutation (C to T) in the second exon of CsUFO resulted in premature translation termination. The expression level of CsUFO was significantly decreased in apical buds of the uft mutant compared with the wild-type (WT) WD1. Transcriptome analysis indicated that many genes for organ development were down-regulated in uft plants, suggesting CsUFO-associated networks that regulate flower and tendril development. These findings provide a new insight into understanding the molecular mechanisms of flower organogenesis in cucumber.

On the basis of an undeveloped asymmetrical pyridylcarboxylate ligand, 2-(2-carboxypyridin-4-yl)terephthalic acid (H3CPTA), an indium pyridylcarboxylate framework, [(Me)2NH2]1.5[In1.5(CPTA)2]·5.5NMF·6H2O (1), is synthesized under solvent thermal conditions. 1 displays a 3D anionic framework with a large void space, which contains open square channels with a cross section of 14.6 A and a pore surface decorated with carboxylic oxygen atoms. Depending on the anionic skeleton and high water stability, 1 exhibits high adsorption selectivity and capacity for cationic dyes in aqueous solution. Furthermore, the luminescence performance illustrates that 1 has selectivity and sensitivity to nitenpyram with good recyclability.

Solvothermal reactions of Co(NO3)2·6H2O, 3-amino-1,2,4-triazole, and 1,2,4,5-benzenetetracarboxylic acid afforded a Co-MOF: {[Co2(Hatz)(bta)]·H2O}n. Furthermore, a unique metal–organic-framework-ba...

High-dose (HD) cisplatin remains the standard of care with chemoradiation for locally advanced oropharyngeal cancer (OPC). Cooperative group trials mandate bolus-HD (100 mg/m2 × 1 day, every 3 weeks) cisplatin administration at the beginning of the week to optimize radiosensitization-a requirement which may be unnecessary. This analysis evaluates the impact of chemotherapy administration day of week (DOW) on outcomes. We also report our institutional experience with an alternate dosing schedule, split-HD (50 mg/m2 × 2 days, every 3 weeks). We retrospectively reviewed 435 definitive chemoradiation OPC patients from 10 December 2001 to 23 December 2014. Those receiving non-HD cisplatin regimens or induction chemotherapy were excluded. Data collected included DOW, dosing schedule (bolus-HD vs split-HD), smoking, total cumulative dose (TCD), stage, Karnofsky Performance Status, human papillomavirus status and creatinine (baseline, peak and posttreatment baseline). Local failure (LF), regional failure (RF), locoregional failure (LRF), distant metastasis (DM), any failure (AF, either LRF or DM) and overall survival (OS) were calculated from radiation therapy start. Median follow-up was 8.0 years (1.8 months-17.0 years). DOW, dosing schedule and TCD were not associated with any outcomes in univariable or multivariable regression models. There was no statistically significant difference in creatinine or association with TCD in split-HD vs bolus-HD. There was no statistically significant association between DOW and outcomes, suggesting that cisplatin could be administered any day. Split-HD had no observed differences in outcomes, renal toxicity or TCD compared to bolus-HD cisplatin. Our data suggest that there is some flexibility of when and how to give HD cisplatin compared to clinical trial mandates.

A bifunctional ligand strategy for modification of the functional pores is of great significance in the structural design of metal-organic frameworks (MOFs). Herein, a new 2-fold interpenetrated "pillared-layer" 3D Co-MOF, {[Co(HL)(4,4'-bipy)]·DMF·2H2O}n (1), was successfully synthesized by using two kinds of ligands, imidazolecarboxylic acid and pyridine. The metal-carboxylic layers are pillared by the 4,4'-bipy ligand, displaying a 3D framework with rectangular 3D channels (high BET surface of 190.9 m2 g-1 and maximum aperture of 3.9 A) that are decorated with abundant uncoordinated N and O atoms. 1 shows good water stability and thermal stability (320 °C). The proper pores and active sites endowed 1 with a selective adsorption of Congo red in aqueous solution. In addition, a high CO2 adsorption capacity and an excellent CO2 chemical conversion were observed.

Separation or purification is one of the difficult problems in the petrochemical industry. To help solve the difficulty of separation or purification for C2H2/CO2 and C2Hn/CH4 in the chemical industry, we synthesized a new metal-organic framework (MOF), [Ni(dpip)]·2.5DMF·H2O (1), by a bipyridyl-substituted isophthalic acid ligand. The MOF includes two types of one-dimensional (1D) tubular channels with different sizes and porous environments. The unique tubular channels lead to not only remarkable gas sorption capacity of C2H4, C2H2, and CO2, but also good selectivity for C2H2/CH4, C2H2/CH4, CO2/CH4, and C2H2/CO2, as demonstrated by single-component sorption isotherm results, ideal adsorbed solution theory calculations, and dynamic breakthrough curves. Grand canonical Monte Carlo (GCMC) simulation reveals preferential adsorption sites in the MOF for CO2, C2H2, and C2H4. The MOF also exhibits an obvious size-selective absorption effect on vapor molecules.

The chiral deformation of a conventional helical actuator is unidirectional in each activation (stimuli-on) process and in each recovery (stimuli-off) process, which means that the twisting direction remains the same regardless of the nature of deformation (either winding or unwinding or helix-inversion). In these cases, a complete stimuli-switching cycle is necessary for the realization of a bidirectional helical deformation process that comprises a reversal of twisting direction. Here, we achieved bidirectional and even multi-directional helical shape evolution in each stimuli-on (or off) process. The strategy relies on, on one hand, asymmetrically crosslinking and/or elongating the two sides of a photocrosslinkable liquid crystal polymer (LCP) monolith, and on the other hand, tailoring the uniaxially aligned polymer strip to form an off-axis mesogen orientation. We obtained a wide variety of helical actuators capable of reversing their twisting directions by only cooling (or heating). The mechanisms of these various chiral deformation-reversal behaviours and the two observed reversals of the twisting direction during cooling have been elucidated.

In this paper, gas sensing characteristics of Boron-doped graphene oxide(B-GO) are presented firstly. In order to detect the optimal value of boron doping, different amounts of boron (5-30 wt%) are adopt in the doping process. The results of sensing test revealed that at room temperature (20 °C) and humidity (30%), 15 wt% B-GO has the optimal sensitivity to NH3. Meanwhile, the detection response and recovery time of B-GO gas sensor to NH3 are relatively short. Theoretical models of graphene and B-doped graphene are established, and energy change in the gas-adsorption of NH3 on the graphene oxide or B-doped graphene oxide is calculated. The enhanced sensing performance was ascribed to the B-doping and the formation of chemical bonds between boron and NH3.

Two new three-dimensional (3D) metal–organic frameworks (MOFs), namely {[Cu2(L)(4,4′-bipy)(OH)]·H2O}n (1) and {[Mn3(L)2(4,4′-bipy)(DMA)2]·H2O}n (2), were constructed by a newly synthesized thioether carboxylic acid ligand 5-((formic acid-3-sulfur)methyl)isophthalic acid (H3L) and 4,4′-bipyridine (4,4′-bipy). Thioether bonds in H3L can rotate freely in space, which are conducive in constructing MOFs with rich and stable structures. Simultaneously, the uncoordinated sulfur atoms affect the polarity of the framework and play an important role in adsorption. Gas adsorption results indicated that 1 can selectively adsorb CO2 from the mixture of CH4/CO2. Moreover, due to the high catalytic activity of [Cu4(COO)6N4O2] clusters, 1 is also an excellent recyclable catalyst that can chemically fix CO2 into cyclic carbonate under mild solvent-free conditions. Therefore, 1 may be explored as a dual-functional material for industrial adsorption and catalysis.

Developing highly efficient and low-cost electrocatalysts for the hydrogen evolution reaction (HER) in neutral media is crucial but still a significant challenge on account of the sluggish multistep reaction kinetics involved. Theoretically, constructing a metal/metal hydroxide interface with a metal hydroxide acting as a water dissociation promotor and a metal as the subsequent hydrogen adsorption site is expected to accelerate the HER kinetics in neutral media. We found that the intercalation of tungstate into Ni(OH)2 can tune the electronic structure of the Ni/Ni(OH)2 interface, decrease the energetic barrier for the Volmer step, and thus optimize the HER performance of Ni/Ni(OH)2 hybrid. Herein, a heterostructured Ni/Ni(OH)2 nanosheet array on Cu foam is designed and constructed via a simple hydrothermal and subsequent plasma reduction strategy. The HER performance can be further enhanced by assembling tungstate-intercalated Ni/Ni(OH)2 hybrid nanosheets on Cu2O nanotube arrays, exhibiting a low overpotential (39 mV @ 10 mA cm−2) and excellent stability (48 h).

A new multi-functional metal–organic framework, {[Cu2(HL)(H2O)2]·NMP·2H2O}n (1), was assembled by employing an asymmetrical V-shaped rigid multicarboxylic acid ligand H5L (H5L = 2,4-di(2′,5′-dicarboxylphenyl)benzoic acid) with Cu(II) ions. 1 possesses a 3D pore formed by two types of intersecting 1D cuboid channels. Moreover, owing to the abundant uncoordinated carboxylate O atoms decorated in the channels and open metal centers generated by the removal of coordinated water molecules, 1 exhibits a high CO2 adsorption capacity and significantly selective capture for CO2 over CH4. Hence, further research on the chemical fixation of CO2 is implemented, which reveals excellent heterogeneous catalytic activity. In addition, 1 displays particularly selective sorption towards the rhodamine B (RB) dye. Consequently, this study may provide a facile synthetic route for the construction of multi-functional materials.

Herein, we report a new 3D porous Co(II)-based metal–organic framework catalyst (Me2NH2)2[Co3(L)2(H2O)2]·2DMF (MOF I), which has been successfully prepared by using Co(II) ions and rigid V-shaped 3,5-di(2,4-dicarboxylphenyl)pyridine (H4L) via the solvothermal reaction. Structural analysis reveals that I displays a porous structure with the pore size of 16.2 × 7.2 A2 based on the trinuclear [Co3(COO)4(H2O)2N2] secondary building units (SBUs). Gas sorption experiments on the guest free sample I′ reveals a high capacity and selectivity to CO2 over CH4. And further, the catalytic explorations of the I′-catalyzed system (I′: 3 mol%; proline: 40 mol%; CH3CN: 2 mL) reveal that benzyl alcohols with different structures can be efficiently transformed into benzyl alcohols without by-products under mild conditions.

Suitable chemical components in water systems for human health are a crucial prerequisite for mankind's survival. Simple and effective innovations are being developed to efficiently monitor healthy and toxic substances. Here, with a hydrothermal technique, a novel thermostable metal–organic framework (MOF) [Cd2(L)(bib)0.5(H2O)3]n·1.75n(H2O) (MOF-1, H4L = biphenyl-2,3,3′,5′-tetracarboxylic acid, bib = 1,4-bis(imidazolyl)butane) was designed and synthesized. MOF-1 shows a 4,5-connection binodal 3D fsx-type topological net with irregular cages, which the bulk materials show high phase purity, excellent thermo/aqua-stability and intense fluorescence. The luminescent MOF was studied for the highly sensitive detection of trace amounts of Fe3+ ions and nitrobenzene and shows high KSV values of 4.653 × 104 and 5.724 × 104, respectively. It was also demonstrated that MOF-1 possesses superior probing ability towards nine other nitroaromatic explosives with remarkable quenching percentages. These results offer a new possibility for the potential multiple recognition of various chemical substances in human body and water systems by utilizing novel dual-functionalized luminescent MOF sensors.

A novel two-dimensional coordination polymer with a negatively charged framework named {[(CH3)2NH2][Zn2(L)2]·DMF}n (1) was solvothermally synthesized via the assembly of Zn(II) ions with the organic ligand H3L (2-(3,5-dicarboxylphenyl)-6-carboxyl-benzimidazole). 1 was characterized by IR spectroscopy, thermogravimetry, single-crystal, and powder X-ray diffraction methods. 1 possesses a 1D rectangle channel decorated by abundant uncoordinated imidazole N atoms and carboxylate O atoms, and is a better CO2 adsorbent and promising CO2/CH4 selective material, suggesting potential application in gas separation. Moreover, 1 can also serve as a multi-responsive sensing material for detecting nitrobenzene (NB) and Cr2O72−via a luminescence quenching effect with a low detection limit, and the mechanisms of the quenching effect and sensing properties of 1 are discussed in detail.

Two new metal–organic frameworks (MOFs), formulated as [Cd3(L)2(H2O)2]·2H2O (1) and [Zn2(L)(OH)(H2O)]·2DMA (2, DMA = N,N-dimethylacetamide), were first constructed via an unsymmetrical N-heterocyclic 5-((4-carboxypyridin-2-yl)oxy)isophthalic acid (H3L) ligand. Then, a proportion of the Zn(II) ions of 2 were substituted by fine-tuning the contents of Co(II) ions to obtain two new isomers, Co1-MOF 2 and Co2-MOF 2, the successful doping of which can be proved by PXRD, IR spectra, ICP, XPS, and SEM. The luminescent experiments suggested that complex 1 should be a good detector for detecting Fe3+ and Cr2O72− ions. More remarkably, the Co-rich MOF materials have increased gas capture for CO2 and CH4 compared to that of the Co-free isomer 2, and the absorption amount of CO2 and CH4 may rise with the increasing content of Co(II) ions in the system at higher pressure and lower temperature.

Considering the important applications and purification requirement of C2 hydrocarbons in the industry, the separation of C2 in mixtures is a vital task. To achieve this goal, herein a new Ni2+-based metal–organic framework (MOF) has been solvothermally prepared by utilizing a tetrazolyl-carboxyl ligand and 4,4′-bipyridine coligands as well as incorporating F− ions. The MOF shows a unique pillared-layer framework based on the novel metal–tetrazolate–carboxylate–fluorine chains, and possesses high chemical stability. Owing to the exposed adsorption sites of uncoordinated N atoms and F− ions in the channels, the MOF had high loadings for C2H2 and selectivity for C2H2 over C2H4, C2H6, CO2 and CH4. Under ambient conditions, dynamic breakthrough experiments revealed that the MOF performs effective separation of C2H2 from binary (C2H2–CH4, C2H2–C2H6, C2H2–C2H4, and C2H2–CO2) and ternary (C2H2–CO2–CH4, C2H2–C2H6–CH4, C2H2–C2H4–CH4, and C2H2–C2H4–C2H6) mixtures. The comparison based on the GCMC calculation revealed the crucial role of the accessible N and F sites for the selective capture of C2H2.

A new 3D luminescent Ba-organic framework {[Ba3L2(NMP)2(H2O)2]·2NMP·H2O}n (1) was first synthesized based on Ba(II) and a triangular-shaped bridging rigid ligand, namely 1,3,5-tris(4-carboxyphenly)benzene (H3L), via solvothermal reaction (NMP = N-methyl pyrrolidone), thereby forming a stabilized network including a one-dimensional (1D) infinite rod-like helical metal chain. 1 may be explored as a recyclable heterogeneous catalyst for the efficient fixation of CO2 to form serviceable cyclic carbonate since 1D channels remain decorated with abundant open metal sites (OMSs), and the catalytic efficiency of 1 was up to 98% for 1-bromo-2,3-propylene oxide. Simultaneously, the luminescence sensing shows that 1 has excellent response and sensitivity towards pollutants such as Fe3+, Cr2O72−, CrO42−, and [Fe(CN)6]3− ions. Moreover, 1 exhibits the particularly selective sorption towards the Congo red (CR) dye. Consequently, this study may provide a facile synthetic route for the construction of multi-functional Ba-MOF materials.

Assembly via 1,4-benzenedicarboxylate linker and Zn2+ ions afforded a new MOF containing novel [Zn4F4] cubane cores, showing excellent C2H2 separation from C2H2–CO2 and C2H2–CH4 mixtures.

Three isostructural lanthanide metal–organic frameworks (Ln-MOFs), {[Ln(L)(H2O)2]·H2O}n (M-Ln, Ln = Eu/Tb/Dy), were prepared with a flexible 3,5-(4-carboxybenzyloxy) benzoic acid (H3L) ligand and lanthanide ions by a solvothermal method. M-Ln are two-dimensional (2D) grid layer-stacking frameworks. M-Eu exhibits excellent chemical stabilities against organic solvents and shows strong luminescence. The experimental results indicated that M-Eu could be used as an ideal fluorescent probe to detect nitrobenzene (NB) in different solvents with a lower detection limit. M-Eu can also be used as a pH sensor because of its superior water stability. Furthermore, M-Eu and M-Tb show unique strong luminescence properties with high absolute quantum yields. The quantum yields can even reach up to 11.8% and 60.5%, respectively. Simultaneously, various kinds of heterometallic doped M-EuxTb1−x MOFs were acquired by tuning the ratios of Eu3+/Tb3+ ions, showing the unique color changes from red, orange-red, orange, orange-yellow, light yellow, yellow to green.

The separation of C2 hydrocarbon mixtures and VOCs is a very important and challenging process for industrial applications. Metal–organic frameworks (MOFs) have attracted extensive attention as an efficient separation material. In this study, a Dy-MOF {[(CH3)2NH2]2[Dy6(μ3-OH)8(FTZB)6(H2O)6]·(solvent)}n based on the construction of Dy6(μ3-OH)8(CO2)6(N4C)6 SBUs and F-H2tzba (2-fluoro-4-(1H-tetrazol-5-yl)benzoic acid) has been synthesized, which with a high-symmetry fcu topology contains two types of cages modified by free –F groups and uncoordinated tetrazolyl N atoms. The Dy-MOF exhibits high C2H2 and C2H4 storage and remarkable separation efficiency for C2H2–CH4, C2H4–CH4 and C2H2–C2H4 mixtures, as confirmed by breakthrough experiments. The MOF also shows significant selective adsorption ability for benzene/toluene and benzene/cyclohexane. The interactions between the MOF and the adsorbates were studied by molecular simulations.

Owing to perovskite possessing the outstanding optoelectronic properties, perovskite-based solar cells show prominent performance. The stability of perovskite-based solar cells hampers the progress of commercialization, so it is important to understand the microstructure mechanism of perovskite degradation under the humidity and oxygen environmental conditions. In this study, a meaningful Debye-type dielectric relaxation was observed under water vapor and oxygen co-treatment conditions. Interestingly, the relaxation was not observed under water vapor or oxygen treatment individually. This new dielectric relaxation is identified as a direct result of dipole jump, and its activation energy was measured to be 630 ± 6 meV. According to photoelectron spectroscopy and 13C nuclear magnetic resonance data, we suggest that the dipoles are formed by CH3NH3+ (MA+) and superoxide (O2-), which originate from the distorted crystal lattice and water vapor-weakened hydrogen bonds of Pb-I cages. In addition, the activation energy fitted by dielectric relaxation might be the energy of ion migration. This study contributes to understanding the mechanism of perovskite degradation from the view of microstructure relaxation and evolution, and also provides a method for the analysis of ion migration energy.

Background: Because of the high affinity of these animal neurotoxin proteins for some special target site, they were usually used as pharmacological tools and therapeutic agents in medicine to gain deep insights into the function of the nervous system. Background and Objective: The animal neurotoxin proteins are one of the most common functional groups among the animal toxin proteins. Thus, it was very important to characterize and predict the animal neurotoxin proteins. Methods: In this study, the differences between the animal neurotoxin proteins and non-toxin proteins were analyzed. Results: Significant differences were found between them. In addition, the support vector machine was proposed to predict the animal neurotoxin proteins. The predictive results of our classifier achieved the overall accuracy of 96.46%. Furthermore, the random forest and k-nearest neighbors were applied to predict the animal neurotoxin proteins. Conclusion: The compared results indicated that the predictive performances of our classifier were better than other two algorithms.

Two new different metal–organic frameworks (MOFs) [Ba(L1)(H2O)2]n·nH2O (MOF 1) and [Ba(L2)(H2O)2]n·0.5nDMF·0.5nH2O (MOF 2) were yielded by the assembly of oxygen-friendly Ba(II) ions and two similar linkers, namely 2-(imidazol-1-yl)terephthalic acid (H2L1) and 2-(1H-1,2,4-triazol-1-yl) terephthalic acid (H2L2). Single-crystal X-ray diffractions (XRD) indicate that MOF 1 is a new three-dimensional (3D) stacking dense network formed by the one-dimensional (1D) rod-shaped chains and L1 linkers, whereas MOF 2 presents a 3D nanotube porous framework with cylindrical tunnels based on the 1D loop chains as the secondary building units (SBUs) by replacing the imidazole group in H2L1 with the triazole group in H2L2. As a result, MOF 2 has a higher density of active sites and Lewis acid sites in the porous surface of nanotube than MOF 1. Thereby, the CO2 capture and separation capacity of MOF 2 is great higher than that of CH4 at 298 K.

To help address efficient separation of CH light hydrocarbons and CH/CO in the chemical industry, the self-assembly via an azolate-carboxylate ligand and Co(II) ion gave rise to a new porous MOF material, [Co(btzip)(Hbtzip)]·2DMF·2HO () (Hbtzip = 4,6-bis(triazol-1-yl)isophthalic acid). In the MOF, the pores are modified by rich uncoordinated triazolyl Lewis basic N atoms and acidic -COOH groups, which strengthen interactions with CH hydrocarbons and CO molecules, leading to high adsorption amounts for CH CH, CH, and CO and remarkable separation efficiency for CH-CH, CO-CH, and CH-CO mixtures, as confirmed by breakthrough experiments on the realistic gas mixtures. The MOF also reveals outstanding selective adsorption ability for benzene/toluene, methanol/1-propanol, methanol/2-propanol, and 2-propanol/1-propanol isomers. Molecular simulations disclose the different adsorption sites in the MOF for various adsorbates.

Retinal segmentation is a prerequisite for quantifying retinal structural features and diagnosing related ophthalmic diseases. Canny operator is recognized as the best boundary detection operator so far, and is often used to obtain the initial boundary of the retina in retinal segmentation. However, the traditional Canny operator is susceptible to vascular shadows, vitreous artifacts, or noise interference in retinal segmentation, causing serious misdetection or missed detection. This paper proposed an improved Canny operator for automatic segmentation of retinal boundaries. The improved algorithm solves the problems of the traditional Canny operator by adding a multi-point boundary search step on the basis of the original method, and adjusts the convolution kernel. The algorithm was used to segment the retinal images of healthy subjects and age-related macular degeneration (AMD) patients; eleven retinal boundaries were identified and compared with the results of manual segmentation by the ophthalmologists. The average difference between the automatic and manual methods is: 2-6 microns (1~2 pixels) for healthy subjects and 3-10 microns (1~3 pixels) for AMD patients. Qualitative method is also used to verify the accuracy and stability of the algorithm. The percentage of “perfect segmentation” and “good segmentation” is 98% in healthy subjects and 94% in AMD patients. This algorithm can be used alone or in combination with other methods as an initial boundary detection algorithm. It is easy to understand and improve, and may become a useful tool for analyzing and diagnosing eye diseases.

Tuning the emissive color changes of lanthanide (Ln) complexes is an important and appealing project for promoting the applications of Ln-complexes. A solvothermal reaction of 4-cyano-3-methylbenzoic acid (HL) and Ln(NO3)3·6H2O affords three isostructural Ln-complexes [Eu(L)3(H2O)2]n (1-Ln) (Ln = Eu, Gd and Tb) with one-dimensional chain structures. 1-Eu and 1-Tb show bright red and green emissions with absolute quantum yields of 3.06% and 11.96%, respectively, and the energy transfer was analyzed in detail through combined calculations. Interestingly, a series of heterometallic doped 1-TbxEu1-x coordination polymers were also obtained by mixing different ratios of Eu3+ and Tb3+ ions, which possess continuous luminescent color changes from green to yellow, orange and red. In addition, 1-Eu exhibits high quenching efficiency and low detection limit (∼10-4 M) for the simultaneous sensing of MnO4-, CrO42- and Cr2O72- ions in water.

Herein, the synthesis of borodepsipeptides utilizing boron-containing isocyanides is described. The target compounds were synthesized via Passerini three-component reaction (P-3CR), in which H2O was utilized as the solvent. Further, unlike conventional P-3CR, where Lewis acid catalysts are often required, the reported method requires no catalyst and proceeds in room temperature. A variety of aldehydes and acids were used as the building blocks to generate the desired products.

Three-dimensional (3D) triply interlocked catenanes are a family of chemical topologies that consist of two identical, mechanically interlocked coordination cage components with intriguingly complex structures. Although only a few successful constructions of 3D interlocked catenanes have been achieved to date via metal-mediated assembly, these complex structures have thus far only been targeted by metal-nitrogen/oxygen coordination techniques. Here, taking advantage of rational ligand design, we report the efficient construction of a series of 3D triply interlocked [2]catenanes of the formula [Ag3L2]2, wherein the metal ions exclusively form bonds to N-heterocyclic carbene (NHC) units, and their subsequent transmetalation to the corresponding [Au3L2]2 gold analogues. The formation and transmetalation reactions proceed under mild conditions and are generally applicable. A series of characterization techniques were applied to confirm the formation and structure of the desired 3D triply interlocked architectures: multinuclear NMR spectroscopy, ESI-MS, and single-crystal X-ray diffraction analysis. The solid-state structure of [Ag3(1a)2]2(PF6)6 unambiguously confirms the existence of a 3D catenane that consists of two identical, mechanically interlocked trinuclear hexacarbene cage components. The interlocking of two 3D cages into a [2]catenane is driven by the efficient π···π stacking of triazine-triazine stacks with cooperative interactions between imidazo[1,5-a]pyridine subunits. Notably, the triply interlocked organometallic cages exhibit good stability toward various organic solvents, concentrations, and temperatures, and no disassembly occurred in the presence of coronene or pyrene. The future construction of mechanically interlocked architectures using metal-carbene bonds rather than metal-nitrogen bonds may provide assemblies with interesting properties for as-yet-unimagined applications in fields such as sensors and molecular electrical conductors.

Background Glioma is a common malignant tumor worldwide. Sevoflurane (Sev) has been reported to inhibit the metastasis of glioma cells, but the underlying molecular mechanism needs further exploration. Methods Cell Counting Kit-8 (CCK8) assay was used to check cell viability. Flow cytometry assay was hired to check cell apoptosis. The protein levels of B-cell lymphoma-2 (Bcl-2), BCL2-Associated X (Bax), hexokinase 2 (HK2) and magnesium transporter 1 (MAGT1) in samples were measured by Western blot. The abilities of cell migration and invasion were estimated by transwell assay. Glucose colorimetric assay kit and lactate colorimetric assay kit were used to check glucose consumption and lactate production, respectively. Quantitative real-time polymerase chain reaction (qRT-PCR) was performed to detect the levels of circular RNA (circRNA) circ_0002755 (also known as the circRNA1656) and microRNA (miR)-628-5p in samples. The interaction between miR-628-5p and circ_0002755 or MAGT1 was predicated by starBase, which was verified by the dual-luciferase reporter assay. Xenograft tumor model was established to explore the biological role of circ_0002755 in vivo. Results Sev inhibited cell viability, migration, invasion and promoted cell apoptosis, and also reduced glucose consumption and lactate production. Circ_0002755 was significantly upregulated in glioma tissues and cells, while its level was notably declined under Sev treatment. Besides, overexpression of circ_0002755 overturned Sev-mediated inhibitory effect on glioma progression. Further research indicated that circ_0002755 targeted miR-628-5p, and miR-628-5p targeted MAGT1, and Sev modulated glioma progression via circ_0002755/miR-628-5p/MAGT1 axis. Moreover, Sev hindered tumor growth in vivo. Conclusion Sev mediated glioma progression via circ_0002755/miR-628-5p/MAGT1 axis.

The efficient backbone-directed self-assembly of cyclic metalla[3]catenanes by the combination of tetrachloroperylenediimide (TCPDI)-based dinuclear rhodium(III) clips and 4,4'-diazopyridine or 4,4'-dipyridylethylene ligands is realized in a single-step strategy. The topology and coordination geometry of the cyclic metalla[3]catenanes are characterized by NMR spectroscopy, ESI-TOF-MS spectrometry, UV/Vis-NIR spectroscopy, and X-ray diffraction studies. The most remarkable feature of the formed cyclic metalla[3]catenane is that it contains π-aggregates (ca. 2.6 nm) incorporating six TCPDIs. Further studies revealed that cyclic metalla[3]catenanes can be converted reversibly to their corresponding sodium adducts and precursor building blocks, respectively. This strategy opens the possibility of generating unique supramolecular structures from discrete functional π-aggregates with precise arrangements.

Simultaneous attainments of high conductivity and superior catalysis are major challenges for amorphous electrocatalysts in carbon dioxide electroreduction at high overpotential. In this study, one protocol is first demonstrated to drive the shell amorphization of nanoporous Ag-Bi (a-NPSB) catalyst with the spatially interconnected ligament during the initial stage of CO2ER. This newborn a-NPSB bestows the outstanding catalysis, evidenced by a Faradaic efficiency of 88.4% for formate production at -1.15 V vs RHE, specific current density of 21.2 mA cm-2, and mass specific current density of 321 mA mg-1. The unique catalysis is considered as the collective contribution of the conductive ligament internally and amorphous Bi2O3 shell with about 3.2 nm thickness externally. Simultaneous obtaining of the conductivity of inner metals and catalytic activity of the amorphous shell will pave a new avenue for designing a robust electrode during electrochemical reaction.

Utilizing 5,5′-oxidiisophthalic acid (H4odip) ligand, one 3D framework {[Ni2(odip)(H2O)4(DMF)]·DMF·2H2O}n (1) with a rare 3-nodal (3,3,4)-connected topological net based on two types of Ni12(odip)1...

The first isolable silylene-germylene complex 5 was assembled by a salt metathesis reaction between the germylene anion 3 and the N-heterocyclic chlorosilylene 4, and structurally characterized. The central structure of 5 demonstrates a remarkable gauche-bent geometry with the silylene and germylene units, which are interconnected by a Si-Ge bond with a length of 2.4498(9) A. This value is not only perceptibly longer than the distances known in doubly bonded germasilenes, and also slightly longer than those in germylsilanes. The DFT calculations on 5 confirmed a nearly nonpolar SiI -GeI single-bond nature and its bonding orbital, as well as the aromaticity of the C3 NGe-rings in 3 and 5. The latter increases the molecular stability of 3 and 5, and makes the preparation of silylene-germylene complex 5 a reality.

This work explores mechanical properties, structural evolution, and mechanism of creep-life enhancement for widely used P9 heat-resistant steel. The 17-year-on-site used P9 alloy exhibit a higher tensile strength and a smaller elongation than the new P9 alloy from room temperature to 700 °C. The P9 alloy also displays a typical ductile feature with a significantly necking profile. The P9 alloy shows phase transformation sequences of α-Fe (bcc) → A c 1 ∼ 858 ° C α + γ -Fe (bcc + fcc) → A c 3 ∼ 894 ° C γ-Fe (fcc) upon heating and γ-Fe (fcc) → M s ∼ 352 ° C martensite (bct) → M f ∼ 300 ° C martensite (bct) upon cooling. The new P9-alloy tube mainly contains ∼73.5% ferrite phase (α-Fe) and ∼26.5% carbide M3C. However, the used P9-alloy tube shows four crystalline phases including ∼45.9% ferrite, ∼14.5% martensite, ∼37.5% cementite (M3C) and ∼2.7% carbide M23C6. The creep test indicates that the used P9-alloy tube has a longer creep-life (or better anti-creep ability) than the new tube. Activation energies of atomic diffusion for the new and used tubes are respectively 252.45 and 345.87 kJ/mol, indicating a decreased diffusion capability in the used tube. This work suggests that martensite laths, lath boundaries, and precipitates (such as carbides) play important roles to inhibit creep-deformation in the P9-alloy steel.

Electrochemical carbon dioxide reduction meditated by metallic catalysts suffers from restricted selectivity and competition from hydrogen evolution, which sensitively depends on ambiguous contributions of alloying and strain state in bimetallic catalysts. Herein, nanoporous Au-Sn (NPAS) containing trace tin solute in Au lattices is delicately designed to convince real strain effect, while eliminating other undesirable factors, such as alloying, crystal facets and surface composition. Compared with nanoporous gold (NPG), the NPAS with a solute strain of ∼2.2 % enables more efficient CO2-to−CO conversion, with an efficiency as high as 92 % at -0.85 V versus reversible hydrogen electrode (vs. RHE), and the high activity can retain for more than 8 h. The combination of HRTEM and surface valence band photoemission spectra reveals that the tensile strain on the surface of 3D nanoporous structure promotes the catalytic activity by shifting up the d-band center and strengthening the adsorption of key intermediate *COOH. A small amount of Sn solute in the nanoporous alloy can prevent ligament coarsening effectively and improve the electrochemical stability.

With the aid of a pyridyl tetracarboxylate ligand, 2,5-bis(2',5'-dicarboxylphenyl)pyridine (H4L), two indium-organic frameworks, [In2(L)(OH)2]·2DMF·2H2O (1) and [Me2NH2][In(L)]·2.5NMF·4H2O (2), with (6,8)- and (4,4)-connected nets have been constructed in different solvent systems. Both 1 and 2 exhibit high thermal and chemical stability. Gas sorption behavior of 1 and 2 for N2, C2H2, C2H4, CO2, and CH4 indicate excellent separation selectivities of C2Hx/CH4 and CO2/CH4. Furthermore, 1 possesses a high density of Bronsted sites and shows efficient catalytic conversion for CO2 cycloaddition with epoxides. Meanwhile, luminescence investigations reveal that 2 can detect nitrofurazone efficiently.

The oxidation behavior of a newly designed Co–Ni-based alloy with varied addition of Ti (1.4 and 2.1 wt.%, hereafter referred as 1.4Ti and 2.1Ti alloys) was explored in air at 900 °C. It is found that an outer oxide layer composed of CoO, an intermediate oxide layer composed of intermittent TiO2 plus continuous Cr, W-rich oxides, and an inner oxidized region composed of Al2O3 were formed on the surface of 1.4Ti alloy, whereas the oxide structure of 2.1Ti alloy was composed of CoO as the outer oxide layer, continuous TiO2, Cr2O3, and WO3 as intermediate oxide layer, and Al2O3 as the inner oxidized region. With increasing Ti content, continuous TiO2 films formed in the intermediate oxide layer, which would lead to the formation of compact Cr2O3 and improved oxidation resistance after 100 h oxidation at 900 °C. These observations indicated that Ti addition can improve the high-temperature oxidation resistance of Co–Ni-based alloys.

The coordination preference of different metal ions and ligands have an immense influence on the constructions of functional MOF materials. In this work, two new monometallic complexes, namely [Ag(HL)(bipy)0.5 ] (1) and {[Tb(L)1.5 (H2 O)]⋅4 H2 O}n (2) (bipy=4,4-bipyridine), have been synthesized successfully by employing a bifunctional 2-(imidazol-1-yl)terephthalic acid (H2 L) ligand. After that, two new different heterometallic-organic frameworks (HMOFs), namely {[TbAg(L)2 (H2 O)3 ]⋅H2 O}n (3) and [TbAg(L)2 (H2 O)]n (4), were obtained from complexes 1 and 2 as the precursors based on a rational stepwise construction strategy and the theory of hard and soft acids and bases (HSAB principle), respectively. The HMOFs bearing dual metallic catalytic sites (Tb and Ag) can be used as heterogeneous catalysts without losing performance for the chemical fixation of CO2 with epoxides including the sterically hindered epoxides, demonstrating some of the highest reported catalytic activity values. This work may provide a new synthetic route toward tailoring new HMOFs with excellent catalytic activity.

Metal-organic frameworks (MOFs) with zeolitic structure process fantastic structural metrics and display excellent applications in many aspects; however, they are difficult to assemble. Herein, on the basis of a tetrahedral Zn

Purpose Gut microbiota affects various physiological functions in the host and has crucial effects on the nervous system. There is increasing evidence of a correlation between gut microbiota and depression; however, the mechanisms underlying the regulation of depression-like behavior by gut microbiota remain unclear. In this study, we assessed the regulatory mechanism of gut microbiota on depression-like behavior in rats. Methods We transplanted fecal microbiota obtained from patients with depression and healthy individuals into germ-free (GF) rats (n=18) through fecal microbiota transplantation technology. Next, we assessed the affective behavior in the rats using the forced swimming test and a sucrose preference test. We used enzyme-linked immunosorbent assay (ELISA) to determine the hippocampal levels of 5-hydroxytryptamine (5-HT), dopamine (DA), and noradrenaline (NE) and the serum levels of corticosterone (CORT), adrenocorticotropic hormone (ACTH), corticotropin-releasing hormone (CRH), tumor necrosis factor-α (TNF-α), interferon-γ (IFN-γ), interleukin-6 (IL-6), interleukin-1 (IL-1), interleukin-1 (IL-4), and interleukin-1 (IL-10). The mitochondrial morphology of small intestinal epithelial cells was observed through transmission electron microscopy. Results Rats that received fecal microbiota from patients with depression (depression microbiota) exhibited depression-like behavior. They presented decreased levels of hippocampal neurotransmitters, serum CORT levels, and anti-inflammatory cytokine levels, as well as increased ACTH, CRH, and serum levels of multiple pro-inflammatory cytokines. Observation of the mitochondria ultrastructure showed damaged mitochondria in the intestinal epithelial cells, significant endoplasmic reticulum expansion, and border aggregation of nuclear chromatin. Conclusion Our findings suggested that the depression-like behaviors induced by the depression microbiota through the neuroendocrine-immune-mitochondrial pathway, which were associated with neuroendocrine disorders, inflammatory responses, and mitochondrial damage.

Based on the mixed carboxylate ligands synthesis strategy, an indium-organic framework, (Me2NH2)1.5[In1.5(FBDC)(BDC)]·2.5NMF·CH3CN (1) has been constructed by using the mixed (2,5-di(2',5'-dicarboxylphenyl)-difluorobenzene (H4FBDC) and terephthalic acid (H2BDC). Compound 1 contains a 3D intersecting pore system which surface is modified by F atoms, and it has excellent stability in pH = 2-12 aqueous solutions. The activated 1 shows high separation for C2H2/CO2 and C2H2/CH4. Moreover, 1 not only has strong luminescence but also has the high selectivity and sensibility of fluorescence detection to nitrofurazone (NZF) in antibiotic sensing experiments, which can be used as a luminescence sensor for NZF detection.

Three new pairs of 2-fold interpenetrated and self-entangled three-dimensional isostructural porous metal-organic frameworks (MOFs), [Zn(L1)(x)0.5]·0.5H2O (x = bipy for 1, bpa for 2, and bpe for 3) and [Zn(L2)(x)0.5]·0.5H2O (x = bipy for 4, bpa for 5, and bpe for 6) [bipy = 4,4'-bipyridine, bpa = 1,2-bis(4-pyridyl)ethylene, and bpe = 1,2-bis(4-pyridyl)ethylene], have been created and fine-tuned via similar skeleton ligands 2-(imidazol-1-yl)terephthalic acid (H2L1) and 2-(1H-1,2,4-triazol-1-yl)terephthalic acid (H2L2) and N-auxiliary coligands with different linking groups. Interestingly, the porosities of the MOFs can be effectively increased via the insertion of -CH2CH2- or -CH═CH- spacers into the N-auxiliary bipy ligand. As a result, complexes 5 and 6 displayed highly enhanced CO2 uptake capacities. Furthermore, complex 5 also had a higher C2/C1 selectivity as well as great CO2 cycloaddition efficiency.