Search

Effective procedures for the synthesis of optically pure alcohols are highly valuable. A commonly employed method involves the biocatalytic reduction of prochiral ketones. This is typically achieved by using nicotinamide cofactor‐dependent reductases. In this work, we demonstrate that a rather unexplored class of enzymes can also be used for this. We used an F420‐dependent alcohol dehydrogenase (ADF) from Methanoculleus thermophilicus that was found to reduce various ketones to enantiopure alcohols. The respective (S) alcohols were obtained in excellent enantiopurity (>99 % ee). Furthermore, we discovered that the deazaflavoenzyme can be used as a self‐sufficient system by merely using a sacrificial cosubstrate (isopropanol) and a catalytic amount of cofactor F420 or the unnatural cofactor FOP to achieve full conversion. This study reveals that deazaflavoenzymes complement the biocatalytic toolbox for enantioselective ketone reductions., An alternative to NADH dependence: An F420‐dependent alcohol dehydrogenase can be used to asymmetrically reduce prochiral ketones. Conveniently, using a cheap sacrificial cosubstrate (isopropanol), the same enzyme can regenerate the deazaflavin cofactor.

The asymmetric hydrogenation of conjugated tetrasubstituted alkenes with transition-metal catalysts is a challenging reaction, especially for substrates bearing a halide substituent. We describe a two-step multienzymatic reduction of a series of α-halo β-alkyl tetrasubstituted cyclic enones, affording halohydrins with three contiguous stereogenic centers, in good yield and with a high stereoselectivity. The reduction is catalyzed by a stereospecific ene-reductase (OYE2-3 or NemA) and a highly enantioselective alcohol dehydrogenase (ADH). The use of two enantiodivergent ADHs allows the control of the diastereoselectivity. The absolute stereochemical configurations of the products have been determined from the analysis of single-crystal structures (Flack's parameter). The enantiomeric excess (ee) has been determined by derivatization of the products with (R) Mosher's acid. Lastly, we extended our methodology also to a nonhalogenated substrate: the α-methyl ketoisophorone was reduced by two distinct enantiodivergent ene-reductases (flavin mononucleotide- and F 420-dependent), affording each enantiomer of the saturated ketone with ee > 98%.

Flavoprotein oxidases can catalyze oxidations of alcohols and amines by merely using molecular oxygen as the oxidant, making this class of enzymes appealing for biocatalysis. The FAD‐containing (FAD=flavin adenine dinucleotide) alcohol oxidase from P. chrysosporium facilitated double and triple oxidations for a range of aliphatic diols. Interestingly, depending on the diol substrate, these reactions result in formation of either lactones or hydroxy acids. For example, diethylene glycol could be selectively and fully converted into 2‐(2‐hydroxyethoxy)acetic acid. Such a facile cofactor‐independent biocatalytic route towards hydroxy acids opens up new avenues for the preparation of polyester building blocks., Triple action: The flavoprotein alcohol oxidase (AOX*) facilitates the double and triple oxidations of diols. Interestingly, depending on the diol substrate, these reactions result in formation of either lactones or hydroxy acids. Such biocatalytic route towards hydroxy acids has potential for the preparation of polyester building blocks.

Deazaflavin-dependent whole-cell conversions in well-studied and industrially relevant microorganisms such as

The vanillyl-alcohol oxidase (VAO) family is a rich source of biocatalysts for the oxidative bioconversion of phenolic compounds. Through genome mining and sequence comparisons, we found that several family members lack a generally conserved catalytic aspartate. This finding led us to study a VAO-homolog featuring a glutamate residue in place of the common aspartate. This 4-ethylphenol oxidase from Gulosibacter chungangensis (Gc4EO) shares 42 % sequence identity with VAO from Penicillium simplicissimum, contains the same 8 alpha-N-3-histidyl-bound FAD and uses oxygen as electron acceptor. However, Gc4EO features a distinct substrate scope and product specificity as it is primarily effective in the dehydrogenation of para-substituted phenols with little generation of hydroxylated products. The three-dimensional structure shows that the characteristic glutamate side chain creates a closely packed environment that may limit water accessibility and thereby protect from hydroxylation. With its high thermal stability, well defined structural properties and high expression yields, Gc4EO may become a catalyst of choice for the specific dehydrogenation of phenolic compounds bearing small substituents.

Pollution, accidents, and misinformation have earned the pharmaceutical and chemical industry a poor public reputation, despite their undisputable importance to society. Biotechnological advances hold the promise to enable a future of drastically reduced environmental impact and rigorously more efficient production routes at the same time. This is exemplified in the Baeyer-Villiger reaction, which offers a simple synthetic route to oxidize ketones to esters, but application is hampered by the requirement of hazardous and dangerous reagents. As an attractive alternative, flavin-containing Baeyer-Villiger monooxygenases (BVMOs) have been investigated for their potential as biocatalysts for a long time, and many variants have been characterized. After a general look at the state of biotechnology, we here summarize the literature on biochemical characterizations, mechanistic and structural investigations, as well as enzyme engineering efforts in BVMOs. With a focus on recent developments, we critically outline the advances toward tuning these enzymes suitable for industrial applications.

Enzymes often by far exceed the activity, selectivity, and sustainability achieved with chemical catalysts. One of the main reasons for the lack of biocatalysis in the chemical industry is the poor stability exhibited by many enzymes when exposed to process conditions. This dilemma is exemplified in the usually very temperature‐sensitive enzymes catalyzing the Baeyer–Villiger reaction, which display excellent stereo‐ and regioselectivity and offer a green alternative to the commonly used, explosive peracids. Here we describe a protein engineering approach applied to cyclohexanone monooxygenase from Rhodococcus sp. HI‐31, a substrate‐promiscuous enzyme that efficiently catalyzes the production of the nylon‐6 precursor ε‐caprolactone. We used a framework for rapid enzyme stabilization by computational libraries (FRESCO), which predicts protein‐stabilizing mutations. From 128 screened point mutants, approximately half had a stabilizing effect, albeit mostly to a small degree. To overcome incompatibility effects observed upon combining the best hits, an easy shuffled library design strategy was devised. The most stable and highly active mutant displayed an increase in unfolding temperature of 13°C and an approximately 33x increase in half‐life at 30°C. In contrast to the wild‐type enzyme, this thermostable 8x mutant is an attractive biocatalyst for biotechnological applications., This work describes the stabilization of an e‐caprolactone‐producing cyclohexanone monooxygenase through protein engineering. Applying a computational pipeline for predicting stabilizing point mutations and an innovative shuffled library strategy for their combination, the authors report an increase of 13 °C of the melting temperature of the notoriously unstable enzyme, while the half‐life improved 33‐fold.

F-420-dependent enzymes are found in many microorganisms and can catalyze a wide range of redox reactions, including those with some substrates that are otherwise recalcitrant to enzyme-mediated reductions. Unfortunately, the scarceness of the cofactor prevents application of these enzymes in biocatalysis. The best F-420-producing organism, Mycobacterium smegmatis, only produces 1.4 mu mol per liter of culture. Therefore, we synthesized the unnatural cofactor FO-5'-phosphate, coined FOP. The FO core-structure was chemically synthesized, and an engineered riboflavin kinase from Corynebacterium ammoniagenes (CaRFK) was then used to phosphorylate the 5'-hydroxyl group. The triple F21H/F85H/A66I CaRFK mutant reached 80% of FO conversion in 12 h. The same enzyme could produce 1 mg (2.5 mu mol) of FOP in 50 mL of reaction volume, which translates to a production of 50 mu mol/L. The activity toward FOP was tested for an enzyme of each of the three main structural classes of F-420-dependent oxidoreductases. The sugar-6-phosphate dehydrogenase from Cryptosporangium arvum (FSD-Cryar), the F-420:NADPH oxidoreductase from Thermobifida fusca (TfuFNO), and the F-420-dependent reductases from Mycobacterium hassiacum (FDR-Mha) all showed activity for FOP. Although the activity for FOP was lower than that for F-420, with slightly lower k(cat) and higher K-m values, the catalytic efficiencies were only 2.0, 12.6, and 22.4 times lower for TfuFNO, FSD-Cryar, and FDR-Mha, respectively. Thus, FOP could be a serious alternative for replacing F-420 and might boost the application of F-420-dependent enzymes in biocatalysis.

With the aim of applying redox-neutral cascade reactions in organic media, fusions of a type II flavin-containing monooxygenase (FMO-E) and horse liver alcohol dehydrogenase (HLADH) were designed. The enzyme orientation and expression vector were found to influence the overall fusion enzyme activity. The resulting bifunctional enzyme retained the catalytic properties of both individual enzymes. The lyophilized cell-free extract containing the bifunctional enzyme was applied for the convergent cascade reaction consisting of cyclobutanone and butane-1,4-diol in different microaqueous media with only 5 % (v/v) aqueous buffer without any addition of external cofactor. Methyl tert-butyl ether and cyclopentyl methyl ether were found to be the best organic media for the synthesis of γ-butyrolactone, resulting in about 27 % analytical yield.

A collection of fusion biocatalysts has been generated that can be used for self-sufficient oxygenations or ketone reductions. These biocatalysts were created by fusing a Baeyer-Villiger monooxygenase (cyclohexanone monooxygenase from Thermocrispum municipale: TmCHMO) or an alcohol dehydrogenase (alcohol dehydrogenase from Lactobacillus brevis: LbADH) with three different cofactor regeneration enzymes (formate dehydrogenase from Burkholderia stabilis: BsFDH; glucose dehydrogenase from Sulfolobus tokodaii: StGDH, and phosphite dehydrogenase from Pseudomonas stutzeri: PsPTDH). Their tolerance against various organic solvents, including a deep eutectic solvent, and their activity and selectivity with a variety of substrates have been studied. Excellent conversions and enantioselectivities were obtained, demonstrating that these engineered fusion enzymes can be used as biocatalysts for the synthesis of (chiral) valuable compounds. (C) 2019 The Authors. Published by Elsevier Ltd.

The F420 deazaflavin cofactor is an intriguing molecule as it structurally resembles the canonical flavin cofactor, although behaves as a nicotinamide cofactor due to its obligate hydride‐transfer reactivity and similar low redox potential. Since its discovery, numerous enzymes relying on it have been described. The known deazaflavoproteins are taxonomically restricted to Archaea and Bacteria. The biochemistry of the deazaflavoenzymes is diverse and they exhibit great structural variability. In this study a thorough sequence and structural homology evolutionary analysis was performed in order to generate an overarching classification of the F420‐dependent oxidoreductases. Five different deazaflavoenzyme Classes (I–V) are described according to their structural folds as follows: Class I encompassing the TIM‐barrel F420‐dependent enzymes; Class II including the Rossmann fold F420‐dependent enzymes; Class III comprising the β‐roll F420‐dependent enzymes; Class IV which exclusively gathers the SH3 barrel F420‐dependent enzymes and Class V including the three layer ββα sandwich F420‐dependent enzymes. This classification provides a framework for the identification and biochemical characterization of novel deazaflavoenzymes.

Biocatalysis is increasingly used for synthetic purposes in the chemical and especially the pharmaceutical industry. Enzyme discovery and optimization which is frequently needed to improve biocatalytic performance rely on high-throughput methods for activity determination. These methods should ideally be generic and applicable to entire enzyme families. Hydrogen peroxide (H2O2) is a product of several biocatalytic oxidations and its formation can serve as a proxy for oxidative activity. We designed a genetically encoded sensor for activity measurement of oxidative biocatalysts via the amount of intracellularly-formed H2O2. A key component of the sensor is an H2O2-sensitive transcriptional regulator, OxyR, which is used to control the expression levels of fluorescent proteins. We employed the OxyR sensor to monitor the oxidation of glycerol to glyceraldehyde and of toluene to o-cresol catalysed by recombinant E. coli expressing an alcohol oxidase and a P450 monooxygenase, respectively. In case of the P450 BM3-catalysed reaction, we additionally monitored o-cresol formation via a second genetically encoded sensor based on the phenol-sensitive transcriptional activator, DmpR, and an orthogonal fluorescent reporter protein. Single round screens of mutant libraries by flow cytometry or by visual inspection of colonies on agar plates yielded significantly improved oxidase and oxygenase variants thus exemplifying the suitability of the sensor system to accurately assess whole-cell oxidations in a high-throughput manner., Chemical Science, 12 (44), ISSN:2041-6520, ISSN:2041-6539

This chapter represents a journey through flavoprotein oxidases. The purpose is to excite the reader curiosity regarding this class of enzymes by showing their diverse applications. We start with a brief overview on oxidases to then introduce flavoprotein oxidases and elaborate on the flavin cofactors, their redox and spectroscopic characteristics, and their role in the catalytic mechanism. The six major flavoprotein oxidase families will be described, giving examples of their importance in biology and their biotechnological uses. Specific attention will be given to a few selected flavoprotein oxidases that are not extensively discussed in other chapters of this book. Glucose oxidase, cholesterol oxidase, 5-(hydroxymethyl)furfural (HMF) oxidase and methanol oxidase are four examples of oxidases belonging to the GMC-like flavoprotein oxidase family and that have been shown to be valuable biocatalysts. Their structural and mechanistic features and recent enzyme engineering will be discussed in details. Finally we give a look at the current trend in research and conclude with a future outlook.

In this paper, we report on the discovery of a novel, robust protein cage (encapsulin) that we could use for packaging various biocatalysts. We have elucidated the structure of the stable encapsulin by electron microscopy and X-ray diffraction. Furthermore, we developed an effective expression system for the encapsulin and a facile protocol for preparing encapsulated enzymes. By packaging and testing various enzymes (varying in size, oligomeric structure, and cofactor type) we demonstrate that, through encapsulation, the enzymes become significantly more stable. We also provide evidence that the pores of the encapsulin, through a size-exclusion effect, can modulate the substrate acceptance profile of an encapsulated enzyme.

Enzyme instability is an important limitation for the investigation and application of enzymes. Therefore, methods to rapidly and effectively improve enzyme stability are highly appealing. In this study we applied a computational method (FRESCO) to guide the engineering of an alcohol dehydrogenase. Of the 177 selected mutations, 25 mutations brought about a significant increase in apparent melting temperature (Delta T-m >= +3 degrees C). By combining mutations, a 10-fold mutant was generated with a T-m of 94 degrees C (+51 degrees C relative to wild type), almost reaching water's boiling point, and the highest increase with FRESCO to date. The 10-fold mutant's structure was elucidated, which enabled the identification of an activity-impairing mutation. After reverting this mutation, the enzyme showed no loss in activity compared to wild type, while displaying a T-m of 88 degrees C (+45 degrees C relative to wild type). This work demonstrates the value of enzyme stabilization through computational library design.

Biochemical and biophysical research communications 529(3), 548 - 553 (2020). doi:10.1016/j.bbrc.2020.06.059, Using a newly discovered encapsulin from Mycolicibacterium hassiacum, several biocatalysts were packaged in this robust protein cage. The encapsulin was found to be easy to produce as recombinant protein. Elucidation of its crystal structure revealed that it is a spherical protein cage of 60 protomers (diameter of 23 nm) with narrow pores. By developing an effective coexpression and isolation procedure, the effect of packaging a variety of biocatalysts could be evaluated. It was shown that encapsulation results in a significantly higher stability of the biocatalysts. Most of the targeted cofactor-containing biocatalysts remained active in the encapsulin. Due to the restricted diameters of the encapsulin pores (5–9 Å), the protein cage protects the encapsulated enzymes from bulky compounds. The work shows that encapsulins may be valuable tools to tune the properties of biocatalysts such as stability and substrate specificity., Published by Academic Press, Orlando, Fla.

To expand the arsenal of industrially applicable oxidative enzymes, fusions of alcohol dehydrogenases with an NADPH‐oxidase were designed. Three different alcohol dehydrogenases (LbADH, TbADH, ADHA) were expressed with a thermostable NADPH‐oxidase fusion partner (PAMO C65D) and purified. The resulting bifunctional biocatalysts retained the catalytic properties of the individual enzymes, and acted essentially like alcohol oxidases: transforming alcohols to ketones by using dioxygen as mild oxidant, while merely requiring a catalytic amount of NADP+. In small‐scale reactions, the purified fusion enzymes show good performances, with 69–99 % conversion, 99 % ee with a racemic substrate, and high cofactor and enzyme total turnover numbers. As the fusion enzymes essentially act as oxidases, we found that commonly used high‐throughput oxidase‐activity screening methods can be used. Therefore, if needed, the fusion enzymes could be easily engineered to tune their properties., Going self‐sufficient: Alcohol dehydrogenases (ADHs) can catalyze selective alcohol oxidations and can be applied to kinetically resolve racemic alcohols, or to produce carbonyl building blocks. By fusing ADHs with an NADPH oxidase, self‐sufficient biocatalysts can be produced that act like alcohol oxidases. These enzyme fusions can be used for conversions and for activity screening to aid enzyme engineering.

Various flavoprotein oxidases were recently shown to oxidize primary thiols. Herein, this reactivity is extended to sec-thiols by using structure-guided engineering of 5-(hydroxymethyl) furfural oxidase (HMFO). The variants obtained were employed for the oxidative kinetic resolution of racemic sec-thiols, thus yielding the corresponding thioketones and nonreacted R-configured thiols with excellent enantioselectivities (E >= 200). The engineering strategy applied went beyond the classic approach of replacing bulky amino acid residues with smaller ones, as the active site was additionally enlarged by a newly introduced Thr residue. This residue established a hydrogen-bonding interaction with the substrates, as verified in the crystal structure of the variant. These strategies unlocked HMFO variants for the enantioselective oxidation of a range of sec-thiols.

The conversion of a series of pharmaceutical compounds was examined with three variants of cytochrome P450BM3 fused to phosphite dehydrogenase (PTDH) to enable cofactor recycling. Conditions for enzyme production were optimized, and the purified PTDH-P450BM3 variants were tested against 32 commercial drugs by using rapid UPLC-MS analysis. The sets of mutations (R47L/F87V/L188Q and R47L/F87V/L188Q/E267V/G415S) improved conversion for all compounds, and a variety of products were detected. Product analysis showed that reaction types included C-hydroxylation, N-oxidation, demethylation, and aromatization. Interestingly, enzymatic aromatization could occur independent of the addition of reducing coenzyme. These results identified new conversions catalyzed by P450BM3 variants and showed that a small set of mutations in the oxygenase domain could broaden both substrate range and reaction type.

A set of bifunctional oxidase–peroxidases has been prepared by fusing four distinct oxidases to a peroxidase. Although such fusion enzymes have not been observed in nature, they could be expressed and purified in good yields. Characterization revealed that the artificial enzymes retained the capability to bind the two required cofactors and were catalytically active as oxidase and peroxidase. Peroxidase fusions of alditol oxidase and chitooligosaccharide oxidase could be used for the selective detection of xylitol and cellobiose with a detection limit in the low‐micromolar range. The peroxidase fusions of eugenol oxidase and 5‐hydroxymethylfurfural oxidase could be used for dioxygen‐driven, one‐pot, two‐step cascade reactions to convert vanillyl alcohol into divanillin and eugenol into lignin oligomers. The designed oxidase–peroxidase fusions represent attractive biocatalysts that allow efficient biocatalytic cascade oxidations that only require molecular oxygen as an oxidant.

The combination of redox enzymes for redox-neutral cascade reactions has received increasing appreciation. An example is the combination of an alcohol dehydrogenase (ADH) with a cyclohexanone monooxygenase (CHMO). The ADH can use NADP+ to oxidize cyclohexanol to form cyclohexanone and NADPH. Both products are then used by CHMO to produce ε-caprolactone. In this study, these two redox-complementary enzymes were fused, to create a self-sufficient bifunctional enzyme that can convert alcohols to esters or lactones. Three different ADH genes were fused to a gene coding for a thermostable CHMO, in both orientations (ADH-CHMO and CHMO-ADH). All six fusion enzymes could be produced and purified. For two of the three ADHs, we found a clear difference between the two orientations: one that showed the expected ADH activity, and one that showed low to no activity. The ADH activity of each fusion enzyme correlated with its oligomerization state. All fusions retained CHMO activity, and stability was hardly affected. The TbADH-TmCHMO fusion was selected to perform a cascade reaction, producing ε-caprolactone from cyclohexanol. By circumventing substrate and product inhibition, a > 99% conversion of 200 mM cyclohexanol could be achieved in 24 h, with > 13,000 turnovers per fusion enzyme molecule. Electronic supplementary material The online version of this article (10.1007/s00253-017-8501-4) contains supplementary material, which is available to authorized users.

recently discovered, moderately thermostable Baeyer-Villiger monooxygenase, polycyclic ketone monooxygenase (PockeMO), from Thermothelomyces thermophila has been employed as a biocatalyst in a set of asymmetric sulfoxidations. The enzyme was able to catalyze the oxidation of various alkyl aryl sulfides with good selectivities and moderate to high activities. The biocatalytic performance was able to be further increased by optimizing some reaction parameters, such as the addition of 10% v v− 1 of water miscible solvents or toluene, or by performing the conversion at a relatively high temperature (45 °C). PockeMO was found to display an optimum activity at sulfide concentrations of 50 mM, while it can also function at 200 mM. Taken together, the data show that PockeMO can be used as robust biocatalyst for the synthesis of optically active sulfoxides. European Union 635734 European Union H2020-LEIT BIO-2014-1

Synthetic lignin was prepared biocatalytically in a one-pot, two-step reaction using an oxidase/peroxidase cascade enzyme system. Using eugenol in combination with eugenol oxidase and a peroxidase, lignin-like material was produced. The cascade reaction takes advantage of the ability of the oxidase to produce coniferyl alcohol and hydrogen peroxide from eugenol and molecular oxygen. The hydrogen peroxide is used by the peroxidase for the formation of crosslinks that typify lignin. As eugenol oxidase has a broad substrate acceptance profile, also 4-allylphenol (chavicol) and 4-allyl-2,6-dimethoxyphenol could be used as precursors of the synthetic lignin. As a result, all three naturally occurring monolignols could be prepared and incorporated in the synthetic lignin. The reaction was optimized in order to achieve the highest possible yield of insoluble lignin oligomers and scaled up to 1 gram. Analysis of the water-insoluble product by gel permeation chromatography revealed the formation of relatively small lignin oligomers (approximate to 1000dalton). By using two-dimensional heteronuclear single quantum coherence nuclear magnetic resonance spectroscopy (2D HSQC NMR) analysis it could be demonstrated that the material contained alpha-O-4/-O-4, beta-O-4, beta-beta, beta-5 linkages and dibenzodioxocin units. All these features indicate that the biocatalytically produced material closely resembles natural lignin. While 54% of eugenol was converted into water-insoluble oligomers, the remaining substrate was converted into water-soluble dimers and tetramers which are important lignin model compounds. Therefore, the presented method represents a valuable and facile biocatalytic approach for the preparation of lignin-like material and potentially valuable chemicals.

Cofactor F420, a 5-deazaflavin involved in obligatory hydride transfer, is widely distributed among archaeal methanogens and actinomycetes. Owing to the low redox potential of the cofactor, F420-dependent enzymes play a pivotal role in central catabolic pathways and xenobiotic degradation processes in these organisms. A physiologically essential deazaflavoenzyme is the F420-dependent glucose-6-phosphate dehydrogenase (FGD), which catalyzes the reaction F420 + glucose-6-phosphate → F420H2 + 6-phospho-gluconolactone. Thereby, FGDs generate the reduced F420 cofactor required for numerous F420H2-dependent reductases, involved e.g., in the bioreductive activation of the antitubercular prodrugs pretomanid and delamanid. We report here the identification, production, and characterization of three FGDs from Rhodococcus jostii RHA1 (Rh-FGDs), being the first experimental evidence of F420-dependent enzymes in this bacterium. The crystal structure of Rh-FGD1 has also been determined at 1.5 Å resolution, showing a high similarity with FGD from Mycobacterium tuberculosis (Mtb) (Mtb-FGD1). The cofactor-binding pocket and active-site catalytic residues are largely conserved in Rh-FGD1 compared with Mtb-FGD1, except for an extremely flexible insertion region capping the active site at the C-terminal end of the TIM-barrel, which also markedly differs from other structurally related proteins. The role of the three positively charged residues (Lys197, Lys258, and Arg282) constituting the binding site of the substrate phosphate moiety was experimentally corroborated by means of mutagenesis study. The biochemical and structural data presented here provide the first step towards tailoring Rh-FGD1 into a more economical biocatalyst, e.g., an F420-dependent glucose dehydrogenase that requires a cheaper cosubstrate and can better match the demands for the growing applications of F420H2-dependent reductases in industry and bioremediation.

Regio- and stereoselective Baeyer-Villiger oxidations are difficult to achieve by classical chemical means, particularly when large, functionalized molecules are to be converted. Biocatalysis using flavin-containing Baeyer-Villiger monooxygenases (BVMOs) is a well-established tool to address these challenges, but known BVMOs have shortcomings in either stability or substrate selectivity. We characterized a novel BVMO from the thermophilic fungus Thermothelomyces thermophila, determined its three-dimensional structure, and demonstrated its use as a promising biocatalyst. This fungal enzyme displays excellent enantioselectivity, acts on various ketones, and is particularly active on polycyclic molecules. Most notably we observed that the enzyme can perform oxidations on both the A and D ring when converting steroids. These functional properties can be linked to unique structural features, which identify enzymes acting on bulky substrates as a distinct subgroup of the BVMO class.

Baeyer-Villiger monooxygenases (BVMOs) and evolved mutants have been shown to be excellent biocatalysts in many stereoselective Baeyer-Villiger transformations, but industrial applications are rare which is partly due to the insufficient thermostability of BVMOs under operating conditions. In the present study, the substrate scope of the recently discovered thermally stable BVMO, TmCHMO from Thermocrispum municipale, was studied. This revealed that the wild-type (WT) enzyme catalyzes the oxidation of a variety of structurally different ketones with notable activity and enantioselectivity, including the desymmetrization of 4-methylcyclohexanone (99% ee, S). In order to induce the reversal of enantioselectivity of this reaction as well as the transformations of other substrates, directed evolution based on iterative saturation mutagenesis (ISM) was applied, leading to (R)-selectivity (94% ee) without affecting the thermostability of the biocatalyst.

Cyclohexanone monooxygenase (CHMO) is a promising biocatalyst for industrial reactions owing to its broad substrate spectrum and excellent regio‐, chemo‐, and enantioselectivity. However, the low stability of many Baeyer–Villiger monooxygenases is an obstacle for their exploitation in industry. Characterization and crystal structure determination of a robust CHMO from Thermocrispum municipale is reported. The enzyme efficiently converts a variety of aliphatic, aromatic, and cyclic ketones, as well as prochiral sulfides. A compact substrate‐binding cavity explains its preference for small rather than bulky substrates. Small‐scale conversions with either purified enzyme or whole cells demonstrated the remarkable properties of this newly discovered CHMO. The exceptional solvent tolerance and thermostability make the enzyme very attractive for biotechnology.

Dye-decolorizing peroxidases (DyPs) represent a new class of oxidative enzymes for which the natural substrates are largely unknown. To explore the biocatalytic potential of a DyP, we have studied the substrate acceptance profile of a robust DyP peroxidase, a DyP from Thermobifida fusca (TfuDyP). While previous work established that this bacterial peroxidase is able to act on a few reactive dyes and aromatic sulfides, this work significantly expands its substrate scope towards lignin related compounds, flavors, and various dyes. (C) 2016 Elsevier Ltd. All rights reserved.

The oxidation of allylic alcohols is challenging to perform in a chemo‐ as well as stereo‐selective fashion at the expense of molecular oxygen using conventional chemical protocols. Here, we report the identification of a library of flavin‐dependent oxidases including variants of the berberine bridge enzyme (BBE) analogue from Arabidopsis thaliana (AtBBE15) and the 5‐(hydroxymethyl)furfural oxidase (HMFO) and its variants (V465T, V465S, V465T/W466H and V367R/W466F) for the enantioselective oxidation of sec‐allylic alcohols. While primary and benzylic alcohols as well as certain sugars are well known to be transformed by flavin‐dependent oxidases, sec‐allylic alcohols have not been studied yet except in a single report. The model substrates investigated were oxidized enantioselectively in a kinetic resolution with an E‐value of up to >200. For instance HMFO V465S/T oxidized the (S)‐enantiomer of (E)‐oct‐3‐en‐2‐ol (1 a) and (E)‐4‐phenylbut‐3‐en‐2‐ol with E>200 giving the remaining (R)‐alcohol with ee>99% at 50% conversion. The enantioselectivity could be decreased if required by medium engineering by the addition of cosolvents (e. g. dimethyl sulfoxide).

Actinobacteria (Actinomycetes) represent one of the largest and most diverse phyla among the Bacteria. The characteristics and phylogeny of actinobacteria have been well-described throughout the years (Anteneh and Franco; Embley et al., 1994; Stackebrandt et al., 1997a,b; Stach and Bull, 2005; Stackebrandt and Schumann, 2006; Ventura et al., 2007; Gao and Gupta, 2012; Goodfellow, 2012a,b; Schrempf, 2013; Lawson, 2018; Lewin et al., 2016). Still actinobacteria are hotspots for discovery of new biomolecules and enzyme activities, fueling an active field of research. The remarkable diversity is displayed by various lifestyles, distinct morphologies, a wide spectrum of physiological and metabolic activities, as well as genetics.

DyP-type peroxidases are heme-containing enzymes that have received increasing attention over recent years with regards to their potential as biocatalysts. A novel DyP-type peroxidase (CboDyP) was discovered from the alkaliphilic cellulomonad, Cellulomonas bogoriensis, which could be overexpressed in Escherichia coli. The biochemical characterization of the recombinant enzyme showed that it is a heme-containing enzyme capable to act as a peroxidase on several dyes. With the tested substrates, the enzyme is most active at acidic pH values and is quite tolerant towards solvents. The crystal structure of CboDyP was solved which revealed atomic details of the dimeric heme-containing enzyme. A peculiar feature of CboDyP is the presence of a glutamate in the active site which in most other DyPs is an aspartate, being part of the DyP-typifying sequence motif GXXDG. The E201D CboDyP mutant was prepared and analyzed which revealed that the mutant enzyme shows a significantly higher activity on several dyes when compared with the wild-type enzyme.

During the last decade the number of characterized F420-dependent enzymes has significantly increased. Many of these deazaflavoproteins share a TIM-barrel fold and are structurally related to FMN-dependent luciferases and monooxygenases. In this work, we traced the origin and evolutionary history of the F420-dependent enzymes within the luciferase-like superfamily. By a thorough phylogenetic analysis we inferred that the F420-dependent enzymes emerged from a FMN-dependent common ancestor. Furthermore, the data show that during evolution, the family of deazaflavoproteins split into two well-defined groups of enzymes: the F420-dependent dehydrogenases and the F420-dependent reductases. By such event, the dehydrogenases specialized in generating the reduced deazaflavin cofactor, while the reductases employ the reduced F420 for catalysis. Particularly, we focused on investigating the dehydrogenase subfamily and demonstrated that this group diversified into three types of dehydrogenases: the already known F420-dependent glucose-6-phosphate dehydrogenases, the F420-dependent alcohol dehydrogenases, and the sugar-6-phosphate dehydrogenases that were identified in this study. By reconstructing and experimentally characterizing ancestral and extant representatives of F420-dependent dehydrogenases, their biochemical properties were investigated and compared. We propose an evolutionary path for the emergence and diversification of the TIM-barrel fold F420-dependent dehydrogenases subfamily. Fil: Mascotti, María Laura. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - San Luis. Instituto Multidisciplinario de Investigaciones Biológicas de San Luis. Universidad Nacional de San Luis. Facultad de Ciencias Físico Matemáticas y Naturales. Instituto Multidisciplinario de Investigaciones Biológicas de San Luis; Argentina Fil: Kumar, Hemant. University of Groningen. Faculty of Mathematics and Natural Sciences; Países Bajos Fil: Nguyen, Quoc-Thai. Scuola Universitaria Superiore IUSS Pavia; Italia. University of Groningen. Faculty of Mathematics and Natural Sciences; Países Bajos. University of Medicine and Pharmacy; Vietnam Fil: Juri Ayub, Maximiliano. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - San Luis. Instituto Multidisciplinario de Investigaciones Biológicas de San Luis. Universidad Nacional de San Luis. Facultad de Ciencias Físico Matemáticas y Naturales. Instituto Multidisciplinario de Investigaciones Biológicas de San Luis; Argentina Fil: Fraaije, Marco Wilhelmus. University of Groningen. Faculty of Mathematics and Natural Sciences; Países Bajos

A generic approach for flavoenzyme immobilization was developed in which the flavin cofactor is used for anchoring enzymes onto the carrier. It exploits the tight binding of flavin cofactors to their target apo proteins. The method was tested for phenylacetone monooxygenase (PAMO) which is a well-studied and industrially interesting biocatalyst. Also a fusion protein was tested: PAMO fused to phosphite dehydrogenase (PTDH-PAMO). The employed flavin cofactor derivative, N6-(6-carboxyhexyl)-FAD succinimidylester (FAD*), was covalently anchored to agarose beads and served for apo enzyme immobilization by their reconstitution into holo enzymes. The thus immobilized enzymes retained their activity and remained active after several rounds of catalysis. For both tested enzymes, the generated agarose beads contained 3 U per g of dry resin. Notably, FAD-immobilized PAMO was found to be more thermostable (40% activity after 1 h at 60 degrees C) when compared to PAMO in solution (no activity detected after 1 h at 60 degrees C). The FAD-decorated agarose material could be easily recycled allowing multiple rounds of immobilization. This method allows an efficient and selective immobilization of flavoproteins via the FAD flavin cofactor onto a recyclable carrier. (C) 2015 Elsevier Inc. All rights reserved.

One approach to bringing enzymes together for multienzyme biocatalysis is genetic fusion. This enables the production of multifunctional enzymes that can be used for whole‐cell biotransformations or for in vitro (cascade) reactions. In some cases and in some aspects, such as expression and conversions, the fused enzymes outperform a combination of the individual enzymes. In contrast, some enzyme fusions are greatly compromised in activity and/or expression. In this Minireview, we give an overview of studies on fusions between two or more enzymes that were used for biocatalytic applications, with a focus on oxidative enzymes. Typically, the enzymes are paired to facilitate cofactor recycling or cosubstrate supply. In addition, different linker designs are briefly discussed. Although enzyme fusion is a promising tool for some biocatalytic applications, future studies could benefit from integrating the findings of previous studies in order to improve reliability and effectiveness.

Background HMF oxidase (HMFO) from Methylovorus sp. is a recently characterized flavoprotein oxidase. HMFO is a remarkable enzyme as it is able to oxidize 5-hydroxymethylfurfural (HMF) into 2,5-furandicarboxylic acid (FDCA): a catalytic cascade of three oxidation steps. Because HMF can be formed from fructose or other sugars and FDCA is a polymer building block, this enzyme has gained interest as an industrially relevant biocatalyst. Results To increase the robustness of HMFO, a requirement for biotechnological applications, we decided to enhance its thermostability using the recently developed FRESCO method: a computational approach to identify thermostabilizing mutations in a protein structure. To make this approach even more effective, we now developed a new and facile gene shuffling approach to rapidly combine stabilizing mutations in a one-pot reaction. This allowed the identification of the optimal combination of seven beneficial mutations. The created thermostable HMFO mutant was further studied as a biocatalyst for the production of FDCA from HMF and was shown to perform significantly better than the original HMFO. Conclusions The described new gene shuffling approach quickly discriminates stable and active multi-site variants. This makes it a very useful addition to FRESCO. The resulting thermostable HMFO variant tolerates the presence of cosolvents and also remained thermotolerant after introduction of additional mutations aimed at improving the catalytic activity. Due to its stability and catalytic efficiency, the final HMFO variant appears to be a promising candidate for industrial scale production of FDCA from HMF. Electronic supplementary material The online version of this article (10.1186/s13068-018-1051-x) contains supplementary material, which is available to authorized users.

Controlling the regioselectivity of Baeyer− Villiger (BV) reactions remains an ongoing issue in organic chemistry, be it by synthetic catalysts or enzymes of the type Baeyer−Villiger monooxygenases (BVMOs). Herein, we address the challenging problem of switching normal to abnormal BVMO regioselectivity by directed evolution using three linear ketones as substrates, which are not structurally biased toward abnormal reactivity. Upon applying iterative saturation mutagenesis at sites lining the binding pocket of the thermostable BVMO from Thermocrispum municipale DSM 44069 (TmCHMO) and using 4-phenyl-2-butanone as substrate, the regioselectivity was reversed from 99:1 (wild-type enzyme in favor of the normal product undergoing 2-phenylethyl migration) to 2:98 in favor of methyl migration when applying the best mutant. This also stands in stark contrast to the respective reaction using the synthetic reagent m-CPBA, which provides solely the normal product. Reversal of regioselectivity was also achieved in the BV reaction of two other linear ketones. Kinetic parameters and melting temperatures revealed that most of the evolved mutants retained catalytic activity, as well as thermostability. In order to shed light on the origin of switched regioselectivity in reactions of 4-phenyl-2-butanone and phenylacetone, extensive QM/MM and MD simulations were performed. It was found that the mutations introduced by directed evolution induce crucial changes in the conformation of the respective Criegee intermediates and transition states in the binding pocket of the enzyme. In mutants that destabilize the normally preferred migration transition state, a reversal of regioselectivity is observed. This conformational control of regioselectivity overrides electronic control, which normally causes preferential migration of the group that is best able to stabilize positive charge. The results can be expected to aid future protein engineering of BVMOs.

Thermobifida fusca is a mesothermophilic organism known for its ability to degrade plant biomass and other organics, and it was demonstrated that it represents a rich resource of genes encoding for potent enzymes for biocatalysis. The thermostable catalase from T. fusca has been cloned and overexpressed in Escherichia coli with a yield of 400 mg/L. Heat treatment of disrupted cells at 60 A degrees C for 1 h resulted in enzyme preparation of high purity; hence, no chromatography steps are needed for large-scale production. Except for catalyzing the dismutation of hydrogen peroxide, TfuCat was also found to catalyze oxidations of phenolic compounds. The catalase activity was comparable to other described catalases while peroxidase activity was quite remarkable with a k (obs) of nearly 1000 s(-1) for catechol. Site directed mutagenesis was used to alter the ratio of peroxidase/catalase activity. Resistance to inhibition by classic catalase inhibitors and an apparent melting temperature of 74 A degrees C classifies this enzyme as a robust biocatalyst. As such, it could compete with other commercially available catalases while the relatively high peroxidase activity also offers new biocatalytic possibilities.

5-Hydroxymethylfurfural oxidase (HMFO) is a flavin-dependent enzyme that catalyzes the oxidation of many aldehydes, primary alcohols, and thiols. The three-step conversion of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid is relevant for the industrial production of biobased polymers. The remarkable wide substrate scope of HMFO contrasts with the enzyme’s precision in positioning the substrate to perform catalysis. We have solved the crystal structure of HMFO at 1.6 Å resolution, which guided mutagenesis experiments to probe the role of the active-site residues in catalysis. Mutations targeting two active-site residues generated engineered forms of HMFO with promising catalytic features, namely enantioselective activities on secondary alcohols and improved 2,5-furandicarboxylic acid yields.

By a targeted enzyme engineering approach, we were able to create an efficient NADPH oxidase from a monooxygenase. Intriguingly, replacement of only one specific single amino acid was sufficient for such a monooxygenase-to-oxidase switch-a complete transition in enzyme activity. Pre-steady-state kinetic analysis and elucidation of the crystal structure of the C65D PAMO mutant revealed that the mutation introduces small changes near the flavin cofactor, resulting in a rapid decay of the peroxyflavin intermediate. The engineered biocatalyst was shown to be a thermostable, solvent tolerant, and effective cofactor-regenerating biocatalyst. Therefore, it represents a valuable new biocatalytic tool.

Flavoprotein oxidases are a diverse class of biocatalysts, most of which catalyze the oxidation of C[BOND]O, C[BOND]N, or C[BOND]C bonds. Flavoprotein oxidases that are known to catalyze the oxidation of C[BOND]S bonds are rare, being limited to enzymes that catalyze the oxidative cleavage of thioethers. Herein, we report that various flavoprotein oxidases, previously thought to solely act on alcohols, also catalyze the oxidation of thiols to thiocarbonyls. These results highlight the versatility of enzymatic catalysis and provide a potential biocatalytic route to reactive thiocarbonyl compounds, which have a variety of applications in synthetic organic chemistry.

The flavin tricyclic conjugated isoalloxazine ring system can undoubtedly be recognized as one of the most versatile cofactor types. Flavin-dependent enzymes display a remarkable wide range of chemical reactions which involve both one- and two-electron transfers and even nonredox reactions. Flavoenzymes and their catalog of reaction types have been exhaustively documented over the past 100 years. However, recent discoveries have unveiled new hidden troves of flavoenzymology. The N5-oxide flavin cofactor was shown to be involved in a new mechanism of oxidizing a substrate. The prenylated flavin cofactor was found to be key in catalyzing carboxylation and decarboxylation reactions. Another atypical flavin cofactor is also discussed: the deazaflavin cofactor F420. Enzymes utilizing this cofactor show great potential as they display activities that are distinct from flavoproteins that use regular flavins. Furthermore, recent findings on the role of the frequently observed covalent flavin-protein linkages reveal how such covalent interactions allow enzymes to be equipped with special catalytic properties. In addition to providing a way to tune the redox potential through covalent tethering the flavin to a protein, the observed bicovalent linkage allows flavoproteins to evolve towards oxidases that deal with rather bulky substrates by virtue of their exceptionally open active sites. The emerging biocatalytic properties of newly discovered flavoenzymes will open up new possibilities for applications in various fields, including biocatalysis, pharmaceuticals, and biotechnology.