Search

Objectives To describe the technique of the aorta balloon occlusion, and evaluate the blood loss in lumbar spine tumor surgery assisted by aortic balloon occlusion, and to observe the balloon‐related complications. Methods Six patients with lumbar spine tumor underwent resuscitative endovascular balloon occlusion of the aorta prior to tumor resections in our institution between May 2018 to January 2021. Medical records including demographic, diagnosis, tumor location, surgical approach, intraoperative blood loss, surgical duration, and perioperative balloon‐related complication were evaluated retrospectively. Results This series included four males and two females, with a median age of 50 years (range 22 to 69). Of these, three primary tumors were plasmacytoma, giant cell tumor of bone, and osteosarcoma, while recurrence of undifferentiated pleomorphic sarcoma (UPS), recurrence of giant cell tumor of bone (GCT), and metastatic thyroid cancer were diagnosed in cases 1, 6, and 2, respectively. L2 was involved in cases 1 and 5. L3 was involved in case 6. L4 was involved in case 2, 3, and 6. L5 was involved in case 4. One‐stage total en bloc resection surgery (TES) was accomplished in all patients; of this series, signal anterior approach was conducted in case 1, signal posterior approach was utilized in cases 2, 3, and 6, while combined anterior and posterior approach was performed in cases 4 and 5. The median intraoperative blood loss was 1683 mL and ranged from 400 to 3200 mL with a median surgical duration of 442 min and a range from 210 to 810 min. During the perioperative period, no serious balloon‐related complications occurred. Conclusions Endovascular balloon occlusion of the aorta successfully controls intraoperative exsanguination, contributing to a more radical tumor resection and a low rate of tumor cell contamination in lumbar tumor surgery., Schematic diagram of the patient with a tumor involved to level L4 had resuscitative endovascular balloon occlusion of the aorta intraoperatively. (i) The patient was transferred to the interventional radiology unit and placed in supine position. Abiding by the Seldinger technique, a balloon dilation catheter (BDC) was inserted to the designated location and then shifted to prone position. (ii) The expected position of the balloon was cephalad to abdominal aortic bifurcation but caudal to the renal arteries (zone III). After the balloon inflated, blood flow to the distal aorta was stopped during the subsequent tumor resection. (iii). During orthopaedic oncology procedure, occlusion of abdominal aorta was identified by the disappearance of dorsal pedis arteries and pulse oximeter oxygen saturation (SpO2) signals from toe.

Objective The objective of the present paper was to explore the clinical effect of one approach anterior decompression and fixation with posterior unilateral pedicle screw fixation for thoracolumbar osteoporosis vertebral compression fractures (OVCF). Methods This is a single‐center retrospective analysis. A total of six thoracolumbar OVCF patients (four women and two men) with an average age of 65.2 years (58–72 years) who were treated between June 2016 and May 2018 were enrolled in the present study. The lesion segments included: 1 case at T11, 1 case at T12, 3 cases at L1, and 1 case at L2. The six thoracolumbar OVCF patients were treated with one approach anterior decompression and fixation with posterior unilateral pedicle screw fixation. After general anesthesia, patients were placed in the right lateral decubitus position, an approximately 10–15‐cm oblique incision was made along corresponding ribs, and the conventional left retroperitoneal and/or the extrapleural approach was performed for anterior lateral exposure. First, anterior decompression and fixation were performed, and then through the unilateral paraspinal muscle approach, posterior pedicle screw fixation was performed under the same incision. The back pain visual analogue scale (VAS), the Oswestry disability index (ODI), and the MacNab criteria were used to evaluate the clinical outcome. The radiographic analysis included the regional kyphosis angle and the fusion rate. Neurological status, operation time, intraoperative bleeding, the time of ambulation, hospital stay, and surgical complications were also assessed. Results Surgery was successful in all six patients, who were followed up for 31.6 months (range, 23–46 months). The operation time was 125–163 min, with a median of 135 min. The preoperative blood loss was 580–1230 mL, with a median of 760 mL. The time of ambulation was 3–5 days, with a median of 4.2 days. The hospital stay was 8–15 days, with the median of 10.5 days. According to the Frankel classification of neurological deficits, of two patients with grade C preoperatively, one had improved to grade D and one had improved to grade E at final follow up; among four patients with grade D preoperatively, at the final follow up one remained the same and three had improved to grade E. The postoperative back pain VAS score decreased significantly, from 6.17 ± 0.75 preoperatively to 0.83 ± 0.41 postoperatively (P, To treat thoracolumbar vertebral osteoporosis compression fractures, we applied one approach anterior decompression and fixation with posterior unilateral pedicle screw fixation. For this procedure, we placed the patient in the right lateral position, and we did not need to change the patient's position during the operation. Anterior pressure was thoroughly relieved, and fixation was performed without damaging the paravertebral muscles. Pedicle screws were placed through the paramedian muscle‐splitting approach, rebuilding the three‐column structure of the spine.

Background Motion axial system may affect contact stress of hinge knee prosthesis. However, it is unclear which axial system provides the better biomechanical effect. Therefore, the aim of this study was to compare the contact stress and stress distribution on the tibial insert and the bushing of hinge knee prostheses with a biaxial (BA) system and a spherical center axial (SA) system during a gait cycle. Methods Three-dimensional finite-element (FE) models of the prostheses with different motion systems were included. The comparisons between experimental tests and FE analyses were performed to verify the models. Dynamic implicit FE analyses were performed to investigate the peak contact stresses and stress distributions on the tibial insert and the bushing. Results The peak contact stresses on the tibial insert and the bushing of the BA prosthesis were higher than those of the SA prosthesis during most gait cycles. The contact time on the bushing is short in the SA prosthesis. The stress distributions on the superior surface of the tibial insert in the BA prosthesis were at the posterior side, but of the SA prosthesis were not fixed. Conclusion The SA prosthesis has a lower peak contact stress on tibial insert and bushing than the BA prosthesis; in addition, the SA prosthesis has a ‘self-adjustment’ mechanism which could disperse high stress on the tibial insert to decrease the risk of wear and damage. The comparison could help designers and surgeons to better understand the future design of rotating hinge knee prostheses which should be able to achieve multiaxial motion and complete weight bearing by the tibial condylar to transmit the axial force better.

Although the structure and composition of collagen have been studied by polarized light microscopy since the early 19th century, many studies and reviews have paid little or no attention to the morphological problems of histopathological diagnosis. The morphology of collagen fibers is critical in guiding mechanical and biological properties in both normal and pathological tendons. Highlighting the organization and spatial distribution of tendon-containing collagen fibers can be very useful for visualizing a tendon's ultrastructure, biochemical and indirect mechanical properties, which benefits other researchers and clinicians. Picrosirius red (PSR) staining, relying on the birefringence of collagen fibers, is one of the best understood histochemical methods that can highly and specifically underline fibers better than other common staining techniques when combined with polarized light microscopy (PLM). Polarized light microscopy provides complementary information about collagen fibers, such as orientation, type and spatial distribution, which is important for a comprehensive assessment of collagen alteration in a tendon. Here, this brief review serves as a simplistic and important primer to research developments in which differential staining of collagen types by the Picrosirius-polarization method is increasing in diverse studies of the medical field, mainly in the assessment of the morphology, spatial distribution, and content of collagen in tendons.

Microwave ablation has been used to treat bone tumors in extremities for more than 30 years. With improved recognition, updated microwave equipment, and expanded clinical application, microwave ablation has recently been widely used to treat bone tumors. To standardize the application of microwave ablation in the clinical treatment of bone tumors in the limbs, research results and clinical experience involving the use of microwave ablation to treat bone tumors in the limbs have been summarized, and a clinical guideline has been designed. This guideline is aimed at providing a reliable clinical basis for indications, preoperative evaluation and decision‐making, perioperative treatment, complications, and other issues via evidence‐based medicine. Two aspects are considered—percutaneous microwave ablation and intraoperative microwave ablation of bone tumors in extremities. Ultimately, the guideline is intended to standardize treatment and improve the clinical efficacy of microwave ablation of bone tumors in extremities.

Spinal metastases have unique epidemiological features and treatment methods. Unfortunately, the relative scarcity of spinal metastases has limited the widespread development of descriptive epidemiological studies, especially in Asian countries. The purpose of this study was to describe the epidemiological characteristics of patients with metastatic spinal tumors in China between 2007 and 2019.From January 2007 and July 2019, data on patients with spinal metastases were collected from five cancer centers in China, and demographic characteristics, primary tumor types, segments and numbers of vertebral lesions, disease-related scores, and treatment methods were reviewed.A total of 2228 patients with spinal metastases were reviewed in this study, including 1279 male patients and 949 female patients, and the male to female ratio was 1.35: 1. More than half of patients developed metastatic diseases between the ages of 50 years and 69 years (64%). Overall, lung cancer (824 cases, 37%) was the most common primary tumor type and the most common level of spinal involvement was multi-level of metastases (860 cases, 39%). 705 patients (32%) had undergone surgical treatments, 1028 patients (46%) had undergone radiotherapy for metastatic vertebrae, and 855 patients (38%) had received systemic treatments. The age, primary tumor type, number of involved vertebrae, Frankel grade, and spinal instability neoplastic score would affect the surgical decision-making.This study provides insight into the epidemiological characteristics of spinal metastasis and health care service utilization in spinal metastasis patients in China.ICD-10: International Classification of Disease, Tenth Revision; VAS: Visual Analogue Scale; KPS: Karnofsky Performance Status; SINS: Spinal Instability Neoplastic Score; SOSG: Spine Oncology Study Group; MRI: Magnetic Resonance Imaging; CT: Computed Tomography; ECT: Emission Computed Tomography.

Background Biomechanical study is fundamental for the preclinical evaluation of knee prostheses. However, there are few reports on the contact characteristic investigation in the hinged knee prosthesis. The purpose of this study was to investigate the contact characteristics of a novel hinged knee prosthesis. Methods All of the component models were designed and assembled using Solidworks. A comparison of the contact area and ultra-high-molecular-weight polyethylene (UHMWPE) deformation using the experimental method (EM) and finite-element analysis (FEA) under 3000 N with the prosthesis at different flexions was performed. The peak contact pressure and von Mises stress on tibial insert and bushing were investigated under nine specific samples that were extracted from a gait cycle using FEA (according to ISO 14243-1: 2009). Results The largest contact area and UHMWPE deformation were 100.78 ± 8.71 mm2 and 0.085 ± 0.015 mm in the EM, and 96.68 mm2 and 0.096 mm in FEA. The peak contact pressure and von Mises stress on the tibial insert were 26.3071 MPa and 10.5115 MPa at 13% of the gait cycle and on bushing were consistently 0 MPa. The contact pressures were distributed at the posterior of the insert. Conclusion The finite-element model was validated to be applicable for predicting the real prosthesis behavior based on the good correlation of the results using the EM and FEA. The model can help to identify contact characteristics and be can used in optimization studies of this novel prosthesis during the design phase.

Background Due to the particularity of patients with bone tumors, the risk of periprosthetic infection following megaprosthetic replacement is much higher than that of traditional total knee arthroplasty. Unfortunately, few studies specifically reported the risk factors for periprosthetic infection following megaprosthetic replacement. The purposes of the study were to (1) establish a nomogram model, which can provide a reference for clinicians, and patients to reduce the occurrence of periprosthetic infection (2) explore the risk factors for deep infection of megaprosthesis. Hypothesis A prediction model can be established and has favorable predictive accuracy. Patients and Methods One hundred and seventy-seven megaprostheses were identified. There were 61 female patients and 116 male patients with a mean age of 35 years. The following risk factors were analyzed: tumor site, sex, age, material for prosthetic stem, tumor type, smoking, diabetes, length of bone resection, operation time, chemotherapy, BMI, malignant tumor staging and hematoma formation. Finally, based on the multivariate analysis, the independent risk factors were used to develop a nomogram model. Results Univariate Cox regression analysis showed that the chemotherapy, longer operation time and hematoma formation were risk factors for periprosthetic infection. Multivariate Cox regression analysis showed that the chemotherapy, longer operation time and hematoma formation were significant risk factors for periprosthetic infection. The nomogram model was established using these significant risk factors, with a C-index of 0.766 and an acceptable consistency according to the internal validation, indicating that the prediction model had favorable predictive accuracy. Discussion This study has important implications for the future investigations of prevention of periprosthetic infection. The nomogram model identifies high-risk patients for whom attached prophylaxis measures are required. Future studies regarding reduction of incidence of periprosthetic infection should pay close attention to these high-risk patients. Level of evidence IV, retrospective, cohort study.

Objectives To evaluate the mechanical properties and provide a theoretical basis of a diaphyseal prosthesis with tooth mechanism using the finite element analysis method from the point of view of biomechanics. Methods A 3D digital femur model was generated based on a 28-year-old healthy man's femoral computed tomography (CT) data in Mimics 17.0 and the customized diaphyseal prostheses with/without tooth mechanism were designed in SolidWorks 2016. The 3D femur model after 8 cm osteotomy in the middle of its shaft and the prostheses with/without tooth mechanism was imported into Abaqus 2016 and the finite element analysis models were established. Three biomechanical tests (compression test, torsion test, and 3P-bending test) under broken load were simulated in FEA to evaluate the performance of the prostheses. Results The stress distributions of the two prostheses were similar and the maximum von Mises stresses placed on them were very close in each test. The maximum von Mises stresses on the prosthesis with tooth mechanism were 31.55, 319.7, and 447.4 MPa, respectively, and those on the prosthesis without tooth mechanism were 26.26, 300.4, and 455.2 MPa, respectively, in the compression, torsion, and 3P-bending tests. The maximum von Mises stresses on them were far below the ultimate tensile strength or ultimate compressive strength of the titanium alloy. Conclusions The diaphyseal prosthesis with tooth mechanism is helpful to adjust the rotation of the long bone during operation. Compared with the conventional diaphyseal prosthesis (without tooth mechanism), the diaphyseal prosthesis with tooth mechanism also has a good biomechanical performance and does not increase the risk of prosthetic failure.

Bone metastasis is a common complication of cancer, and bone is the third most common metastatic site following the lung and liver. Among the various bones, spine is the most common site of metastatic tumors. The treatment goals of patients with spinal metastases are mostly palliative, with the aim of reducing pain and improving quality of life. The treatment of spinal metastases has made significant progress over the past few decades. Each new technology has tried to solve the shortcomings of its predecessors. Currently, there are no mature algorithms or specific techniques that have proven to be the best for spinal metastases, and the treatment method often relies on operator and institutional preferences or biases in some cases. Percutaneous vertebral augmentation has unique value in the management of spinal metastases, understanding its indications, surgical techniques, uses, advantages and complications is critical to providing optimal patient care. We believe that the application of percutaneous vertebral augmentation alone or combined with other techniques can achieve optimal pain relief and functional improvement in the patients with spinal metastases.

Objective To assess the defatting efficacy of high pressure washing and gradient alcohol and biomechanical properties of defatted bone. Methods Fresh cancellous bone was obtained from the femoral condyle and divided into six groups according to different defatting treatments, which were: high pressure washing for 10 s (10S group), 20 s (20S group), and 30 s (30S group), gradient alcohol immersion (Alcohol group), acetone immersion (Acetone group), and non-defatted (Fresh group). The appearance of six groups was observed, and the appearance of defatted bone and fresh bone was compared. The residual lipid content and infrared spectrum were used to compare the efficacy of defatting, the DNA content was used to compare the cell content after defatting, and the maximum stress and elastic modulus were used to compare the effects of defatting treatment on biomechanical properties. Results The fresh bone was yellow and the pores contained a lot of fat. The defatted bone was white and the porous network was clear. There was no difference in residual lipid content among the three groups with high pressure washing (1.45% ± 0.16%, 1.40% ± 0.13%, and 1.46% ± 0.11%, respectively) (P = 0.828). There was no difference in residual lipid content among the 10S, alcohol, and acetone groups (1.45% ± 0.16%, 1.28% ± 0.07%, and 1.13% ± 0.22%, respectively) (P = 0.125). Infrared spectra showed that the fat content of the five defatting groups was significantly lower than that of the fresh group. There was no difference in residual lipid content among the three groups with high pressure washing (4.53 ± 0.23 ug/mL, 4.61 ± 0.18 ug/mL, and 4.66 ± 0.25 ug/mL, respectively) (P = 0.645). There was no difference in residual lipid content among the 10S, alcohol, and acetone groups (4.53 ± 0.23 ug/mL, 4.29 ± 0.24 ug/mL, and 4.27 ± 0.29 ug/mL, respectively) (P = 0.247). The maximum stress of the bone decreased significantly with the increase of the washing time (9.95 ± 0.31 Mpa, 9.07 ± 0.45 Mpa, and 8.17 ± 0.35 Mpa, respectively) (P = 0.003). The elastic modulus of the bone decreased significantly with the increase of the washing time (116.40 ± 3.54 Mpa, 106.10 ± 5.29 Mpa, and 95.63 ± 4.08 Mpa, respectively) (P = 0.003). There was no statistical difference in the maximum stress between the fresh group, the 10S group, the alcohol group, and the acetone group (10.09 ± 0.67 Mpa, 9.95 ± 0.31 Mpa, 10.11 ± 0.07 Mpa, and 10.09 ± 0.39 Mpa, respectively) (P = 0.963). There was no statistical difference in the maximum stress between the fresh group, the 10S group, the alcohol group and the acetone group (119.93 ± 4.94 Mpa, 116.40 ± 3.54 Mpa, 118.27 ± 0.85 Mpa, 118.10 ± 4.52 Mpa, respectively) (P = 0.737). Conclusion The defatting efficiency was satisfactory at a time of 10 s under high pressure washing. In terms of defatting efficiency and its effect on biomechanical properties of bone, high pressure washing and gradient alcohol were similar to conventional acetone solvent extraction defatting.

The morphological characteristics of tendons have been thoroughly evaluated via microscopy. Optical microscopy and electron microscopy are the most commonly used techniques for tendon tissue observation. According to the principles of both microscopy types, preparation and evaluation methods vary. Simple optical microscopy is commonly used in the observation of cells and extracellular matrix, and many stains, including hematoxylin-eosin, Van Gieson, Prussian blue, Alcian blue, and toluidine blue, are used for evaluating cells, collagen fiber arrangement, and noncollagenous proteins. Histological scoring systems have been used in many studies for semi-quantification. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) are the most commonly used electron microscopy types, and special consideration is needed for the fixation and embedding protocols. Glutaraldehyde followed by osmium is most commonly used in the chemical fixation of tendon tissue, followed by epoxy resin embedment. Longitudinal sections captured in SEM images show the arrangement of collagen fibrils and the cells and lipid drops among them, while cross sections captured in TEM images show the diameter and distribution of collagen fibrils. SEM and TEM are used together for comprehensive evaluations. This mini review is focused on the preparation methodology and related evaluation indexes for the morphological evaluation of tendons.

Objective To characterize the visceral metastasis as a predictive tool for the survival of patients with spinal metastases through an exploratory meta-analysis. Methods Two investigators independently searched PubMed and Embase databases for eligible studies from 2000-2016. The effect estimates for the hazard ratio (HR) or risk ratio (RR) and 95% confidence interval (CI) were collected and pooled with a random- or fixed-effect model. Results In total, 18 eligible studies were retrieved with 5468 participants from nine countries. The overall pooled effect size for HR and RR was 1.50 and 3.79, respectively, which was proved to be statistically significant. In the subgroup of prostate cancer (PCa) and non-small cell lung cancer (NSCLC), statistical significance and marginal statistical significance was presented for the pooled HR (HR = 1.76, 95% CI 1.35-2.29) and (RR = 1.56, 95% CI 0.99-2.48), respectively. However, in the subgroup of thyroid cancer, breast cancer, and renal cancer, statistical significance was not achieved (HR = 1.17, 95% CI 0.75-1.83, Z = 0.70, P = 0.486). The results did not show any evidence of publication bias. Conclusions This study demonstrated that visceral metastasis was a significant prognostic factor in patients with spinal metastases as a whole. Interestingly, the onset of visceral metastases differentially impacted the survival in different primary tumors. Therefore, the prognostic value of visceral metastasis might be related to the type of primary tumor.

Objectives To describe the epidemiological characteristics of patients with spinal metastases between 2007 and 2019. Methods Patients with spinal metastases were identified from several clinical centers in China between January 2007 and July 2019. Demographics, primary tumor types, spinal involvement, and Clinical indicators of each patient were reviewed. Results A total of 1196 patients were included in this study, 717 males (59.95%) and 479 females (40.05%), with a male to female ratio of 1.50:1. Most patients (63.71%) were in the ages range of 50 to 69 years. The mean age was 58.6 ± 11.6 (range 13–89) years and the median age was 59.0 years. The average age of females was younger than that of males, and the difference was statistically significant. The proportion of male patients over 60 years old was higher than that of females, and the difference was statistically significant. The most common primary tumor was lung cancer (n = 437, 36.54%), followed by unknown origin (n = 194, 16.22%), kidney cancer (n = 78, 6.52%), breast cancer (n = 76, 6.35%), and liver/biliary cancer (n = 75, 6.27%). The most common primary tumor was lung cancer in both males and females, followed by unknown origin in males and breast cancer in females. There were 730 patients (61.04%) in the subgroup of the number

Background Aseptic loosening has become the main cause of prosthetic failure in medium- to long-term follow-up. The objective of this study was to establish and validate a nomogram model for aseptic loosening after tumor prosthetic replacement around knee. Methods We collected data on patients who underwent tumor prosthetic replacements. The following risk factors were analyzed: tumor site, stem length, resection length, prosthetic motion mode, sex, age, extra-cortical grafting, custom or modular, stem diameter, stem material, tumor type, activity intensity, and BMI. We used univariate and multivariate Cox regression for analysis. Finally, the significant risk factors were used to establish the nomogram model. Results The stem length, resection length, tumor site, and prosthetic motion mode showed a tendency to be related to aseptic loosening, according to the univariate analysis. Multivariate analysis showed that the tumor site, stem length, and prosthetic motion mode were independent risk factors. The internal validation indicated that the nomogram model had acceptable predictive accuracy. Conclusions A nomogram model was developed for predicting the prosthetic survival rate without aseptic loosening. Patients with distal femoral tumors and those who are applied with fixed hinge and short-stem prostheses are more likely to be exposed to aseptic loosening.

Reconstruction of massive bone defects is challenging for orthopaedic clinicians, especially in cases of severe trauma and resection of tumors in various locales. Autologous iliac crest bone graft (ICBG) is the “gold standard” for bone grafting. However, the limited availability and complications at donor sites resulted in seeking other options like allografts and bone graft substitutes. Demineralized bone matrix (DBM) is a form of allograft using acidic solution to remove mineral components, while leaving much of the proteinaceous components native to bone, with small amounts of calcium‐based solids, inorganic phosphates, and some trace cell debris. It is an osteoconductive and osteoinductive biomaterial and is approved as a medical device for use in bone defects and spinal fusion. To pack consistently into the defect sites and stay firmly in the filling parts, DBM products have various forms combined with biocompatible viscous carriers, including sponges, strips, injectable putty, paste, and paste infused with chips. The present review aims to summarize the properties of various kind of viscous carriers and their clinical use combined with DBM in commercially available products. Given DBM'mercially available products. Given DBM;s long clinical track record and commercial accessibility in standard forms, opportunities to further develop and validate DBM as a versatile bone biomaterial in orthopaedic repair and regenerative medicine contexts are attractive.

Purpose: Undisplaced subtle ligamentous Lisfranc injuries are easy to miss or underestimate, and many cases are treated without surgical fixation. It has not yet widely known whether conservative treatment for undisplaced subtle ligamentous Lisfranc injuries may lead to a poor outcome. The purpose of this study is to compare the outcomes of conservative versus surgical management (percutaneous position screw) of undisplaced subtle ligamentous Lisfranc injury. Methods: We analysed 61 cases in this retrospective study, including 38 males and 23 females. Forty-one patients were managed conservatively, while 20 patients received surgical treatment involving minimal invasive percutaneous position screw. American orthopaedic foot &ankle society (AOFAS), foot function index (FFI, including FFI disability, FFI pain score and activity limitation scale) scores, Maryland foot score and short form-36 (SF-36) were recorded and compared after a follow-up of 10- 16 months (average 12.3). Results: Patients in the surgical management group had higher scores in all evaluation methods (p < 0.05). The complications in the conservative management group had higher incidence, mainly including secondary diastasis (34.1% vs. 5.0%), joint stiffness after 3 months (82.9% vs. 0%), and secondary arthrodesis (12.2% vs. 0%). The highest rate of complication in surgical management group was temporary forefoot pain (55.0%). Conclusion: The results of this study suggest that the outcomes of the surgical management with percutaneous position screw fixation are better than the conservative management to treat undisplaced subtle ligamentous Lisfranc injuries. This study can serve as a resource for orthopaedic surgeons in recognizing and managing such injuries. Key words: Undisplaced subtle ligamentous Lisfranc injuries; Conservative management; Surgical management; Percutaneous position screw; Complications

Background Accurate survival estimate is necessary when determining the most appropriate treatment modality for metastatic spinal tumor. The main purpose of this study was to identify the prognostic factors of spinal metastasis and establish a decision tree model. Methods A consecutive cohort of 507 patients from 3 institutional clinical centers who were treated for metastatic spinal tumor between 2005 and 2015 were retrospectively reviewed. In total, 70% of the participants were randomly selected as a “training sample.” The prognostic effect of preoperative factors was evaluated using the “training sample,” and a decision tree model was established. Then, the accuracy of the new model, as well as the Tokuhashi and Tomita score, was tested by the “test sample,” which consisted of the remaining 30% of participants. Results A decision tree model was generated based on the significant factors with an order of descending importance on predicting the prognosis. According to the new model, patients were classified into 3 groups, mean survival times of less than 6 months, 6–12 months, and more than 12 months, who were indicated for conservative therapy/palliative operation, palliative operation, and invasive excision, respectively. The newly established model was confirmed to be of high accuracy in predicting overall survival, whereas the Tokuhashi and Tomita scores were of modest accuracy and consistency. Conclusions A new decision tree model for prognosis prediction in spinal metastasis was established with a satisfactory accuracy and consistency. However, the Tokuhashi and Tomita systems were presented to be less correlated between the scores and actual survival.

Objectives To establish a dynamic three-dimensional (3D) model of upper cervical spine instability and to analyze its biomechanical characteristics. Methods A 3D geometrical model was established after CT scanning of the upper cervical spine specimen. The ligament of the specimen was fatigued to establish the upper cervical spine-instability model. A 100-N preloaded stress was applied to the upper surface of the occipital bone, and then a 1.5-Nm moment was applied in the occipital-sagittal direction to simulate upper cervical spine flexion and extension. Subsequently, the 3D dynamic model was established based on trajectory data that were measured using a motion-capture system. The stress on the main ligament and the relative motion angle of the joint were analyzed. Results The shape of the model grid was regular and the total number of its units was 627 000. After finite-element analysis was conducted, results of the ligament stress and relative movement angle were obtained. After the upper cervical spine instability, the pressure of the alar ligament during the upper cervical spine extension was increased from 2.85 to 8.12 MPa. The pressure of the flavum ligament was increased during the upper-cervical spine flexion, from 0.90 to 1.21 MPa. The pressure of the odontoid ligament was reduced during the upper cervical spine flexion and extension, from 10.46 to 6.67 MPa and 25.66 to 16.35 MPa, respectively. The pressure of the anterior longitudinal ligament and cruciate ligament was increased to a certain degree during upper cervical spine flexion and extension. The pressure of the anterior longitudinal ligament was increased during flexion and extension, from 7.70 to 10.10 MPa and 10.45 to 13.75 MPa, respectively. The pressure of the cruciate ligament was increased during flexion and extension, from 2.29 to 4.34 MPa and 2.32 to 4.40 MPa, respectively. In addition, after upper cervical spine instability, the articular-surface relative-movement angle of the atlanto-occipital joint and atlanto-axial joint had also changed. During upper cervical spine flexion, the angle of the atlanto-occipital joint was increased from 3.49° to 5.51°, and the angle of the atlanto-axial joint was increased from 8.84° to 13.70°. During upper cervical spine extension, the angle of the atlanto-occipital joint was increased from 11.16° to 12.96°, and the angle of the atlanto-axial joint was increased from 14.20° to 17.20°. Therefore, the movement angle of the atlanto-axial joint was most obvious after induction of instability. Conclusion The 3D dynamic finite-element model of the upper cervical spine can be used to analyze and summarize the relationship between the change of ligament stress and the degree of instability in cervical instability. Frequent or prolonged flexion activities are more likely to lead to instability of the upper cervical spine.

Objectives To investigate the association between the number of metastases to the spine and survival in patients with metastatic spinal cord compression (MSCC), as well as the prognosis difference between patients with solitary spinal metastasis (SSM) and multiple spinal metastases (MSM). Methods Three institutional databases were searched to identify all patients who had undergone spinal surgery for metastatic spinal tumors between March 2002 and June 2010. As well as age and gender, preoperative medical conditions were collected from medical records, including primary tumor, preoperative Frankel score, other bone metastases, preoperative Karnofsky performance status (KPS), number of involved vertebrae, pathological fracture metastasis site, serum albumin, sphincter dysfunction and the time of developing motor deficits before surgery. Survival data were obtained from medical records or via telephone follow‐ups. Univariate and multivariate predictors of overall survival for each group were assessed using the Cox proportional hazards model. Results The median postoperative survival time was 6.0 ± 0.6 months (95% confidence interval [CI] 4.8–7.2) in patients with SSM and 7.0 ± 1.0 months (95% CI 5.1–8.9) in patients with MSM (P = 0.238). The difference in survival was not significant between groups. Furthermore, univariate analysis showed that the number of spinal metastases had no significant association with survival (P = 0.075). Primary tumor (P = 0.004) and preoperative KPS (P

Objective To investigate whether visceral metastases have a significant impact on survival in patients with metastasis‐related spinal cord compression (MSCC), and to determine the difference in prognosis between patients with and without visceral metastases. Methods Three institutional databases were searched to identify all patients who had undergone spinal surgery for spinal metastases between March 2002 and June 2010. Data on patient characteristics including pre‐ and post‐operative medical conditions, were collected from medical records or by telephone follow‐up. Survival data were obtained either from medical records or by searching a governmental cancer registry. Results The mean age of study patients was 59.6 ± 10.5 years (range, 18–84 years), of whom 102 were male and 67 female. The median and mean postoperative survival times were 7.0 ± 0.5 (95% CI 6.0–8.0) months and 12.6 ± 1.2 (95% CI 10.1–15.0) months, respectively, in all patients, being 5.0 ± 0.5 (95% CI 4.0–6.0) months and 10.8 ± 2.4 (95% CI 6.1–15.5) months, respectively, for patients with visceral metastases and 7.0 ± 0.8 (95% CI 5.4–8.6) months and 13.0 ± 1.4 (95%CI 10.3–15.6) months, respectively, for patients without visceral metastases (P = 0.87). These survival times did not differ significantly between groups. Multivariate Cox proportional hazard regressions showed that visceral metastases had no statistically significant association with survival (P = 0.277), whereas rate of growth of primary tumor (P = 0.003), preoperative Karnofsky performance status (KPS) (P

OBJECTIVE Relatively few studies have reported on the morphology of the supracondylar femur, which is a fundamental factor affecting prosthetic reconstruction. The objectives of the present study were to measure the morphological parameters of the supracondylar femur, to classify the supracondylar femur, and to provide theoretical guidance for the development of distal femoral prostheses. METHODS The study consisted of 82 patients of Han Chinese nationality in North China. There were 57 men and 25 women included in the study, with an average age of 50.9 years (range, 18-87 years). Effective CT data should include a range of more than 10 cm for the distal femur. CT data for the right distal supracondylar femurs was obtained from DICOM files. Results for the cancellous bone and marrow cavity were retained, and information for the cortical bone was erased to obtain information of the lumen. Measurements of the intracortical cavity have not been reported previously. Lumen models were reconstructed with Mimics 17.0 software. The surfaces of the lumen models were smoothed with Geomagic studio 12.0 software. Using the Solidworks 2014 software, we established a 3-D coordinate system, where variables of the lumen were examined. Correlations between the various measurements were calculated. RESULTS The supracondylar region of the femur was divided into five levels, and the length, breadth, height, and angle values were measured at each level. There were strong correlations between the length indexes (transverse diameter [EF], medial anteroposterior diameter [AC], middle anteroposterior diameter [GH], and lateral anteroposterior diameter [BD]) and the volume index (V). There were also strong correlations among the length indicators (EF, AC, GH, and BD) in each layer. Angle γ was correlated with the lateral anteroposterior diameter (BD) at L2-L6 layers (r = -0.383, -0.385, -0.296, -0.258, -0.24; all P < 0.05) and with the height index (h) at L4-L6 layers (r = -0.244, -0.385, -0.506; all P < 0.05). The most representative parameters were the medial anteroposterior diameter (AC2 R2 = 0.865; AC6 R2 = 0.932), the coronal width ratio, and the sagittal width ratio with volume. The analysis found that the lumen shape of flower-top hat accounted for 81% at most. CONCLUSIONS The supracondylar femur has an asymmetrical structural area. The coronal plane is dominated by a flowerpot-like morphology, and the sagittal plane is narrowest in the lateral 1/3 and resembles a top-hat-like morphology. Our results provide theoretical guidance for developing distal femoral prostheses and for their clinical application.

Objective To evaluate the efficacy of Jintiange capsules and Jintiange combined with other therapies in the treatment of osteoporosis. Methods A systematic review of the literature was conducted through databases including China National Knowledge Infrastructure (CNKI), the VIP Database for Chinese Technical Periodicals (VIP), Wanfang, and PubMed from inception to April 2018. Network meta-analysis was used to determine the relative efficacy of related treatments on osteoporosis. The primary outcome measures are the bone mineral density (BMD) of the lumbar and femoral neck, and the secondary outcome measures are visual analog pain score (VAS) and adverse events. Two reviewers independently selected the studies, extracted information, and assessed the quality of included trials. Data extracted from eligible studies was pooled and meta-analyzed, and the mean differences (MD) with their 95% confidence intervals were estimated as the effect size between treatments. Results Thirty-one studies were included in this study, containing 28 randomized controlled trials (RCT) and 3 non-randomized controlled trials (non-RCT), with a total of 14 regimens treating osteoporosis. According to the surface under the cumulative ranking (SUCRA) curves, Jintiange capsules combined with atorvastatin (89.9%) and Jintiange combined with bisphosphonates (88.2%) have the best efficacy in terms of the BMD of the lumbar and femoral neck, respectively. Based on the VAS, Jintiange combined with calcium has the best analgesic effect (83.4%). Conclusion Jintiange capsules alone and combined with other therapies is a good choice for treating patients with osteoporosis in terms of improving BMD, relieving pain, and reducing adverse events. More large-scale and well-designed RCT are warranted to confirm the results of this study.

Background Cancer patients’ survival time has obviously improved, with the development of systemic treatment techniques. However, the probability of metastases to the vertebrae has also been increased which makes some adverse effects on patients’ quality of life. The prediction of survival plays a key role in choosing therapeutic modality, and Tokuhashi Score was established as one of the most commonly used predictive systems for spinal metastases. Thus, this study was conducted to identify the prognostic effect of factors involved in revised Tokuhashi Score (RTS). Methods Two investigators independently retrieved relevant literature on platforms of PubMed, Embase and Cochrane Library. We identified eligible studies through title/abstract and full-text perusing. Data was extracted including general information of studies, participants’ characteristics, therapeutic modality, overall survival and prognostic effect of factors. Hazard ratio (HR) for each factor was synthesized if available through fixed- or random-effect models as appropriate. Results A total of 63 eligible studies with 10,411 participants were identified. Overall, cases with thyroid cancer had the highest survival rate, while the ones with non-small cell lung cancer and hepatocellular carcinoma lived for the shorted survival time. Performance status, bone metastasis, number of involved vertebrae, visceral metastasis, primary tumor and neurological status were regarded as significant predictors in 71.4, 40.0, 18.2, 63.4, 73.1 and 44.7% of the involved studies respectively. Thirty-eight articles were included in meta-analysis, and prognostic effects of five factors (apart from primary tumor) were analyzed. Factors were all proved to be significant except comparisons between KPS (Karnofsky Performance Status) 10–40 VS. 50–70 and single VS. multiple spinal metastases. Conclusion All factors of RTS were significant on prognosis predicting and should be considered when choosing therapeutic modality for spinal metastases. What’s more, we believe that more accurate prognosis may be obtained after removal of the cut-offs for KPS 10–40 VS. 50–70 and single VS. multiple involved vertebrae. Electronic supplementary material The online version of this article (10.1186/s12885-018-5139-2) contains supplementary material, which is available to authorized users.

Background There is a high aseptic loosening rate for intercalary prosthetic reconstruction for malignant tumors. We evaluated outcomes and complications of intercalary prosthetic reconstruction for pathologic diaphyseal humeral fractures and report the application of an extracortical plate that can prevent early loosening. Methods We retrospectively analyzed 9 patients who underwent intercalary prosthetic reconstruction for pathologic diaphyseal humeral fractures secondary to metastatic diseases between March 2011 and September 2017. Procedures were intercalary prosthetic reconstruction in 4 patients (group A) and an implanted intercalary prosthesis with a plate in 5 patients (group B). Operative time, blood loss, complications, and functional score were noted. Results Mean operative time for group A and B was 80 ± 14 and 94 ± 5 minutes, respectively; blood loss was 115 ± 26 and 120 ± 31 mL respectively; and follow-up was 11.5 ± 10.1 and 6.2 ± 4.4 months, respectively. At final follow-up, all patients in group A had died, and 3 patients in group B had died; mean survival was 11.5 ± 10.1 and 9.3 ± 1.2 months, respectively. The mean postoperative Musculoskeletal Tumor Society score was 24.5 ± 2.4 and 26.2 ± 0.8, respectively. The mean postoperative American Shoulder and Elbow Surgeons score was 85.5 ± 4.20 and 87 ± 2.6, respectively. There were no significant differences between the 2 groups (P > .05). There was 1 aseptic loosening and 1 radial nerve injury in group A; there were no complications in group B. Conclusions The intercalary prosthesis yielded satisfactory outcomes in patients with pathologic diaphyseal humeral fractures, and an extracortical plate can prevent early aseptic loosening.

BackgroundAseptic loosening of distal femoral tumor implants significantly correlates with the resection length. We designed a new “sleeve” that is specially engaged in the metaphysis at least 5 cm proximal to the knee joint line to preserve as much bone stock as possible. This study investigates the influence of a metaphyseal sleeve on the stress-strain state of a bone tumor implant system in the distal femur.MethodsCortex strains in intact and implanted femurs were predicted with finite element (FE) models. Moreover strains were experimentally measured in a cadaveric femur with and without a sleeve and stem under an axial compressive load of 1000 N. The FE models, which were validated by linear regression, were used to investigate the maximal von Mises stress and the implanted-to-intact (ITI) ratios of strain in the femur with single-legged stance loading under immediate postoperative and osseointegration conditions.ResultsGood agreement was noted between the experimental measurements and numerical predictions of the femoral strains (coefficient of determination (R2) ≥ 0.95; root-mean-square error (RMSE%) ≈ 10%). The ITI ratios for the metaphysis were between 13 and 28% and between 10 and 21% under the immediate postoperative and osseointegration conditions, respectively, while the ITI ratios for the posterior and lateral cortices around the tip of the stem were 110% and 119% under the immediate-postoperative condition, respectively, and 114% and 101% under the osseointegration condition, respectively. The maximal von Mises stresses for the implanted femur were 113.8 MPa and 43.41 MPa under the immediate postoperative and osseointegration conditions, which were 284% and 47% higher than those in the intact femur (29.6 MPa), respectively.ConclusionsThis study reveals that a metaphyseal sleeve may cause stress shielding relative to the intact femur, especially in the distal metaphysis. Stress concentrations might mainly occur in the posterior cortex around the tip of the stem. However, stress concentrations may not be accompanied by periprosthetic fracture under the single-legged stance condition.

We aimed to evaluate the effectiveness of surgical methods commonly used for the clinical treatment of giant cell tumors (GCT) of the distal radius. From 2010 to 2018, 32 patients with GCT of the distal radius who underwent surgical treatment were eligible for the study. Among them, 21 patients with available pathological results, complete imaging data and at least 18 months of follow-up were enrolled in the study. Eleven of the patients underwent en bloc resection and non-vascularized autologous fibula reconstruction (Group A), while 10 patients underwent microwave ablation, lesion curettage, and internal fixation with bone cement (Group B). Imaging was carried out to understand the effect of the surgical treatment and postoperative complications. Variables of interested included operation time and blood loss, preoperative and postoperative wrist joint mobility, and postoperative complications during follow-up. The operation time and intraoperative blood loss in group A were higher than in group B, and the difference between groups was statistically significant. The wrist range of motion before and after surgery was statistically significant both in Group A and Group B (p 0.05). The scale deviation and MSTS scores of group A were better than group B (p 0.05), flexion, extension, radial deviation index in group B was better than group A (p 0.05). By evaluating the postoperative functional outcomes of the operated wrist in the two groups, we found that both surgical methods are reliable for treating GCT of the distal radius, with satisfactory postoperative functional recovery and a low incidence of postoperative recurrence (only 1 of 10 patients in group B). The two surgical methods have their own advantages and disadvantages and provide surgeons with one more choice in the clinical context.

Objective To identify the significant prognostic factors for overall survival in patients with spinal metastases and to establish an online widget for predicting survival with an interactive visual approach. Methods Patients operated for spinal metastases between 2010 and 2018 were retrospectively enrolled and were randomly divided into training and validation samples with a ratio of 7:3. Patients’ characteristics were analyzed with univariate and multivariate Cox analyses to identify independent prognostic factors basing on the training sample. A shiny web tool was developed by transforming the fitted multivariable Cox model into a visual interface. Time-dependent area under the curve plot and calibration curve were generated to assess the discrimination ability and consistency of the novel model, both for the training and validation samples. Results A total of 265 consecutive patients were finally included, with 185 in the training sample and 80 in the validation sample. The primary tumor types, lesion site of metastasis, visceral metastasis, Frankel grade, operation category, number of surgical segments, and the preoperative percentage of lymphocyte were demonstrated to be significantly associated with overall survival. A novel shiny model ( https://yang1209xg.shinyapps.io/predictspinalmetastasis/ ) that could provide predicted survival curve and median survival time was established, with favorable discrimination ability and consistency between predicted and actual survival both in internal and external data, according to time-dependent area under the curve plots and calibration curves. COnclusions A user-friendly shiny app with favorable discrimination ability and consistency was released online for predicting the survival of patients with spinal metastases. A continuous survival curve and the predicted median survival time are available to guide the treatment planning.

BACKGROUND: Bone is a common metastatic tissue of kidney cancer. Accurate prediction of the prognosis of patients with kidney cancer bone metastasis (KCBM) can help doctors and patients choose a further appropriate treatment. METHODS: During the period from January 1, 2010 to December 31, 2015, screening patients with kidney cancer diagnosed with bone metastases from the SEER database. Summary of demographic, pathology, number of other metastatic organs, and treatment for KCBM patients. All prognostic factors were plotted for Kaplan-Meier survival curves and log-rank test. Prognostic factors of P

Aseptic loosening is a common prosthetic failure mode. The purpose of this study was to identify dose-response relationship between length of femoral stem and aseptic loosening. We collected data of patients who underwent distal femoral prosthetic replacements at our institution from 2001 to 2017. Cox regression and two-piecewise regression model were used to analyze the associations between stem length and aseptic loosening. Significant association of length of femoral stem with aseptic loosening was observed in multivariate model and a non-linear relationship could be found from the smoothed curve. In two-piecewise model, an inflection point was calculated to be 143 mm. On the left of the inflection point, every 1 mm increase in the length of stem indicated that the risk of aseptic loosening could be reduced by 6%. There was a significant non-linear relationship between the length of femoral stem and aseptic loosening, and the inflection point was 143 mm.

More revisionary reconstruction procedures are required following failing anterior cruciate ligament (ACL) reconstructions, which are often regarded as a technique challenge with very limited goals. This study will be performed to compare the outcomes between groups of primary and revision knee reconstruction. Two observers conducted the literature retrieval from the platforms of PubMed, Embase, and CENTRAL. Studies which compared knee function and stability between primary and revisionary reconstructions were included. The data was synthesized by meta-analysis with fixed- or random-effects models as appropriate. A total of 10 eligible studies were included with 954 subjects in the primary group and 378 in the revision group. The International Knee Documentation Committee International Knee Documentation Committee (IKDC) subscores, side-to-side difference, and Lysholm score were demonstrated to be significantly improved at final follow-up in both groups, while Tegner score was not. The overall IKDC, Knee injury and Osteoarthritis Outcome Score (KOOS), and Lysholm scores were significantly inferior in the revision group compared to the primary group. However, knee laxity according to side-to-side difference was demonstrated to be similar between the two groups. Revision ACL reconstruction (RACLR) could provide patients with excellent restoration of knee outcomes compared to the status before revision. Also, while knee function in the revision group was inferior to the primary group, knee stability was equivalent between the two groups at the final follow-up.

Gorham–Stout disease (GSD) is an extremely rare bone condition of unknown etiology characterized by spontaneous and progressive resorption of bones. GSD can occur at any age and is not related to gender, genetic inheritance, or race. Any part of the skeleton can be affected and the symptoms correlate with the sites involved. The diagnosis of GSD is established based on the combination of clinical, radiologic, and histologic features after excluding other diseases. Because of its rarity, current knowledge is limited to case reports and there is no agreement on the best strategy for treatment. The following case report describes a successfully treated case of GSD in a 26‐year‐old male patient with the left scapula and the 7th–9th left ribs involved. The patient was diagnosed with osteoporosis‐related pleural effusion at a local hospital. In our institution, the patient was diagnosed with GSD and treated with radiotherapy and bisphosphonate. The disease was controlled and there was no evidence of disease progression during follow‐up. Genetic sequencing was performed to investigate the etiology of GSD. In addition, the present study reviews the theories regarding the etiology, the clinical manifestations, the diagnostic approaches, and treatment options for this rare disease.

Objective To evaluate the correlation between features of knee joint rheumatoid arthritis (RA) identified on MRI and histological examination as a means of elucidating the pathogenesis of joint destruction in RA. Methods This is a prospective analysis of 26 knee joints of 22 patients who underwent total knee arthroplasty (TKA) for the treatment of RA. Based on the degree of destruction of articular cartilage and the menisci, the occurrence of bone marrow edema and bone erosion, and synovial thickening, the stage of the knee joints were classified using MRI by two radiologists. Differences in the severity of destruction of the articular cartilage of the medial and lateral femoral condyles and medial and lateral tibial plateaus, the medial and lateral menisci, and bone were compared using analysis of variance with a post-hoc test, and the Mann-Whitney U-test. Samples of cartilage, subchondral bone, menisci, and synovium were obtained from the resected knee specimens during TKA and analyzed semiquantitatively using microscopy and immunohistochemistry. Histological differences between areas of bone erosion and bone marrow edema were evaluated using a Mann-Whitney U-test. Results The extent of articular destruction was classified as grade 4 for the medial and lateral femoral condyles and the medial and lateral tibial plateaus for most patients, with an average destruction grade of 3.6 (F = 5.455, P = 0.002), with the least amount of destruction identified on the lateral femoral condyle. The majority of knee joints in the RA patients were at stage 3 (21/26, 80.8%), followed by stage 4 (4/26, 15.4%). Fibrosis, thinning and destruction, and hyperplasia were the most severe pathological changes in cartilage. In a total of 26 specimens, 36 areas of bone marrow edema and 68 areas of bone erosion were identified, with fibrosis, a mosaic structure of bone, and lymphocyte infiltration being the most severe changes in these areas. The degree of meniscus destruction was classified as grade 4 in the majority patients for both the medial and lateral meniscus, with an average degree of meniscal destruction over all specimens of 3.85, and greater destruction of the medial meniscus than of the lateral meniscus (Z = 2.062, P = 0.039). Fibrosis and engulfing calcified debris were the most severe pathological manifestations. Synovitis was also identified in all 26 specimens, with hyperplasia of intima cells and lymphocyte and plasma cell infiltration being the most severe pathological manifestations. Conclusions Severe destruction of the articular cartilage and menisci is a characteristic feature of RA. Bone marrow edema and bone erosion can both also be found, but are less characteristic. Synovial infiltration may be the triggering mechanism of the destruction of the cartilage, menisci, and bone marrow. However, the origin of bone marrow edema requires further investigation.

Diaphyseal defects in long bones of extremities following segmental resection are very common in the clinic, and reconstruction remains a great challenge. Although there are many treatments for diaphyseal defects at present, reconstruction with an intercalary endoprosthesis may be an optimal method. We demonstrate a surgical technique for reconstruction of a humeral shaft defect with an intercalary endoprosthesis following tumor resection, and achieve a good clinical outcome. We conclude that in comparison with other methods, reconstruction with an intercalary endoprosthesis is simple, effective, and allows for earlier weight bearing and more rapid restoration of function.

We aimed to investigate the status quo of orthopaedic publications from China and characterize the most-cited articles to provide valuable insights for orthopaedists. PubMed and Embase databases were used to search for Chinese orthopaedic publications from 1997 to 2017 to determine the growing pattern of Chinese research globally. Then Web of Science database was searched for articles with most citations in all journals included in the Journal Citation Report 2016 under the category of “orthopaedics” for the last five years, and the total numbers of articles in the last three respective years were also analyzed. The number of publications published in PubMed and Embase during the last 20 years ranged from 218 to 6836, and year 2002 had the biggest growth rate of 59.15% and 2014 had the biggest growth value of 1203, comparing with previous years. Fifty-three articles were selected as the most-cited ones for the last five years. European Spine Journal and West China Hospital are the journal and institution that published the most high-impact articles. Majority of the articles (47%) were meta-analysis, and 6 RCTs were identified in a total of 11 clinical articles. Most high-cited clinical articles or meta-analyses were classified as level of evidence of I (41.67%).A total of 1238 articles, 1264 articles, and 1225 articles in the field of orthopedics from China were included in SCI for the last three years. The Chinese orthopaedic research grew rapidly in terms of number of publications in the last decades, and the quality of publications also improved in recent years.

Objective To study the biomechanical properties of a novel modular intercalary prosthesis for humeral diaphyseal segmental defect reconstruction, to establish valid finite element humerus and prosthesis models, and to analyze the biomechanical differences in modular intercalary prostheses with or without plate fixation. Methods Three groups were set up to compare the performance of the prosthesis: intact humerus, humerus-prosthesis and humerus-prosthesis-plate. The models of the three groups were transferred to finite element software. Boundary conditions, material properties, and mesh generation were set up for both the prosthesis and the humerus. In addition, 100 N or 2 N.m torsion was loaded to the elbow joint surface with the glenohumeral joint surface fixed. Humeral finite element models were established according to CT scans of the cadaveric bone; reverse engineering software Geomagic was used in this procedure. Components of prosthetic models were established using 3-D modeling software Solidworks. To verify the finite element models, the in vitro tests were simulated using a mechanical testing machine (Bionix; MTS Systems Corporation, USA). Starting with a 50 N preload, the specimen was subjected to 5 times tensile (300 N) and torsional (5 N.m) strength; interval time was 30 min to allow full recovery for the next specimen load. Axial tensile and torsional loads were applied to the elbow joint surface to simulate lifting heavy objects or twisting something, with the glenohumeral joint surface fixed. Results Stress distribution on the humerus did not change its tendency notably after reconstruction by intercalary prosthesis whether with or without a plate. The special design which included a plate and prosthesis effectively diminished stress on the stem where aseptic loosening often takes place. Stress distribution major concentrate upon two stems without plate addition, maximum stress on proximal and distal stem respectively diminish 27.37% and 13.23% under tension, 10.66% and 11.16% under torsion after plate allied. Conclusion The novel intercalary prosthesis has excellent ability to reconstruct humeral diaphyseal defects. The accessory fixation system, which included a plate and prosthesis, improved the rigidity of anti-tension and anti-torsion, and diminished the risk of prosthetic loosening and dislocation. A finite element analysis is a kind of convenient and practicable method to be used as the confirmation of experimental biomechanics study.

Reconstruction of bone defects following femoral diaphyseal tumor resection is challenging. Segmental allograft (SA) and intercalary prosthesis (IP) are the most common reconstruction methods for femoral diaphyseal metastatic tumors with pathological fracture. However, whether the complications and functional outcomes differ between SA and IP remains unclear. To compare the clinical outcomes and complications for patients treated with SA reconstruction or IP replacement for femoral shaft tumors, 34 patients who had undergone intercalary resection for metastatic tumor with pathological fracture in the femoral diaphysis were evaluated. Of these, 18 had received SA and 16 IP. There were 11 males, and 24 females, with a mean age of 64.5±11.3 years. The most common sites of primary metastases were lung (26.5%), breast (17.6%) and liver (14.7%). The visual analog scale (VAS), implant-related complications and the Musculoskeletal Tumor Society (MSTS) scores for each patient were collected. The follow-up period for patients ranged from 2 to 27 months. At the most recent follow-up, 28 patients had succumbed to mortality, with a mean survival time of 6.9±3.7 months for the IP group and 7.4±3.0 months for the SA group. Patients with IP had a significantly shorter time to full weight bearing and hospitalization time than those who received SA (P=0.003 and P=0.002, respectively). The rates of overall complications and implant-related complications were significantly lower for IP as compared with SA (18.8 vs. 66.7%, P=0.007; 12.5 vs. 55.6%, P=0.013). The reoperation rate of the SA group was higher than that of the IP group (38.9 vs. 12.5%), however the difference between the two groups was statistically insignificant (P=0.125). MSTS scores were significantly higher for the IP group as compared with the SA group at one month after surgery (IP, 26.7±1.6 vs. SA, 20.3±1.5; P

OBJECTIVE: To introduce and analyze the feasibility of a new surgical strategy for circumferential reconstruction of subaxial cervical and cervicothoracic spine by simultaneously combined anterior–posterior approach in the sitting position. METHODS: A retrospective review was performed for seven patients who underwent the above surgical procedure between July 2011 and January 2015. Among the seven patients, there were six men and one woman, with an average age of 52 years (range, 36–79 years). Six patients were confirmed to have a lower subaxial cervical fracture and dislocation with a locked facet joint, and the other patient had an invasive tumor involving both anterior and posterior parts of vertebrae and lamina, detected by radiological examination. The levels involved for all patients were from C (4) to T (2). According to American Spinal Injury Association (ASIA) classification, one case was class A, four were class B, and two were class D. The patients were restricted in the sitting position with traction and a halo in extension to immobilize the head during the operation. The simultaneously combined anterior–posterior operation for reduction, decompression or tumor resection and circumferential reconstruction was carried out. RESULTS: Both anterior and posterior procedures were successfully completed simultaneously in the sitting position in all cases. There were no perioperative complications. The average operative time was 175 ± 32 min (range, 120–240 min), and the mean blood loss was 430 ± 85 mL (range, 200–1100 mL). The patients were followed up for 35.8 months (range, 18–60 months). The symptom of neck pain improved distinctly and no evidence of implant failure was noted in any patients. Neurological status improvement was confirmed in six patients, who had suffered incomplete paralysis. The ASIA grade improved in five patients, and two cases had no change in grade. CONCLUSIONS: The “sitting position” simultaneously combined anterior–posterior approach is safe and is superior to the traditional prone position and supine position, and the surgical results are satisfactory.

Objective To evaluate the clinical effect of the minimally invasive transforaminal lumbar interbody fusion combined with posterolateral fusion and unilateral fixation using a tubular retractor in the management of degenerative lumbar disease. Methods A retrospective analysis was conducted to analyze the clinical outcome of 58 degenerative lumbar disease patients who were treated with minimally invasive transforaminal lumbar interbody fusion combined with posterolateral fusion and unilateral fixation during December 2012 to January 2015. The spine was unilaterally approached through a 3.0‐cm skin incision centered on the disc space, located 2.5 cm lateral to the midline, and the multifidus muscles and longissimus dorsi were stripped off. After transforaminal lumbar interbody fusion and posterolateral fusion the unilateral pedicle screw fixation was performed. The visual analogue scale (VAS) for back and leg pain, the Oswestry disability index (ODI), and the MacNab score were applied to evaluate clinical effects. The operation time, peri‐operative bleeding, postoperative time in bed, hospitalization costs, and the change in the intervertebral height were analyzed. Radiological fusion based on the Bridwell grading system was also assessed at the last follow‐up. The quality of life of the patients before and after the operation was assessed using the short form‐36 scale (SF‐36). Results Fifty‐eight operations were successfully performed, and no nerve root injury or dural tear occurred. The average operation time was 138 ± 33 min, intraoperative blood loss was 126 ± 50 mL, the duration from surgery to getting out of bed was 46 ± 8 h, and hospitalization cost was 1.6 ± 0.2 ten thousand yuan. All of the 58 patients were followed up for 7–31 months, with an average of 14.6 months. The postoperative VAS scores and ODI score were significantly improved compared with preoperative data (P

The purpose of this article is to evaluate the efficacy and feasibility of preoperative surgery with 3D printing‐assisted internal fixation of complicated acetabular fractures. A retrospective case review was performed for the above surgical procedure. A 23‐year‐old man was confirmed by radiological examination to have fractures of multiple ribs, with hemopneumothorax and communicated fractures of the left acetabulum. According to the Letounel and Judet classification, T‐shaped fracture involving posterior wall was diagnosed. A 3D printing pelvic model was established using CT digital imaging and communications in medicine (DICOM) data preoperatively, with which surgical procedures were simulated in preoperative surgery to confirm the sequence of the reduction and fixation as well as the position and length of the implants. Open reduction with internal fixation (ORIF) of the acetabular fracture using modified ilioinguinal and Kocher–Langenbeck approaches was performed 25 days after injury. Plates that had been pre‐bent in the preoperative surgery were positioned and screws were tightened in the directions determined in the preoperative planning following satisfactory reduction. The duration of the operation was 170 min and blood loss was 900 mL. Postoperative X‐rays showed that anatomical reduction of the acetabulum was achieved and the hip joint was congruous. The position and length of the implants were not different when compared with those in preoperative surgery on 3D printing models. We believe that preoperative surgery using 3D printing models is beneficial for confirming the reduction and fixation sequence, determining the reduction quality, shortening the operative time, minimizing preoperative difficulties, and predicting the prognosis for complicated fractures of acetabulam.

Objective To report the results of the posterior approach for thoracic ossification of posterior longitudinal ligament (TOPLL) by using a special “L” osteotome. Methods The present study enrolled 16 consecutive patients (9 men and 7 women) between May 2009 and September 2013. All patients underwent a posterior circumferential decompression osteotomy and segmental instrumentation with interbody fusion. The mean age at surgery was 57.3 years (range, 37–68 years). Patients’ data, clinical manifestation, blood loss, length of surgery, complications, visual analog scale (VAS), Japanese Orthopedic Association (JOA), and Frankel grading system before and after surgery were collected and evaluated, retrospectively. Results The average follow-up period was 30 ± 19 months (range, 12–50 months). All patients were successfully treated with posterior compression and segmental instrumentation with interbody fusion. The average operation time was 261.6 ± 51.3 min (range, 190–310 min). The mean blood loss was 980.3 ± 370.5 mL (range, 600–2100 mL). All patients had subjective improvement of motor power and gait. Average preoperative and postoperative JOA scores were 4.2 ± 1.7 and 7.8 ± 2.5 points, respectively. Differences in the overall JOA scores showed significant postoperative improvement. At the last follow-up, all patients improved either by one or two Frankel grades. There was a significant difference between preoperative VAS scores and those 3 months after surgery (P 0.05). Cerebrospinal fluid (CSF) leakage occurred in 3 patients. Acute neurological deterioration was encountered postoperatively in 1 patient. Conclusion Treatment with posterior transpedicular osteotomy and circumferential decompression was found to be safe, effective, reliable, and technically feasible, and keeping the thoracic cavity intact avoids many shortcomings of anterior surgery and results in a satisfactory spinal decompression.

Objective To evaluate the clinical outcomes and complications of segmental prosthetic reconstruction for pathological diaphyseal femoral fractures secondary to metastatic tumors. Methods Between 2011 and 2015, we retrospectively evaluated 16 patients (6 men and 10 women; 64.5 ± 11.4 years old at diagnosis) who underwent prosthetic reconstruction after segmental resection of diaphyseal femoral fractures due to metastatic lesions. Visual analog scale (VAS), functional outcomes, implant-related complications, and Mean postoperative Musculoskeletal Tumor Society (MSTS) score for each patient were collected. Results The mean length of bone defect was 10.2 ± 2.6 cm (range, 8–16 cm); follow-up was 9 ± 6.8 months (range, 2–25 months) for all patients, and 24 months (23 and 25 months) for the 2 patients still alive. At final follow-up, 14 patients were dead, indicating a mean survival of 6.9 ± 3.6 months (range, 2–14 months). Mean preoperative VAS score was 8.5 ± 1.0, which decreased to 2.5 ± 1.3 at day 2 postoperatively, indicating significant pain relief (P < 0.05). The MSTS score for lower extremities was 84.6% (range, 73%–90%). The range of motion and function of adjacent joints was within the normal limits in all cases. Three patients (33%) developed complications, including aseptic loosening because of disease progression (1), infection (1), and peri-prosthesis fracture (1). Conclusion These findings demonstrated that this approach greatly relieves pain, and yields satisfactory functional outcomes with fewer complications in patients with pathological femoral fractures secondary to metastatic tumors; however, survival was not significantly improved.

Giant cell tumor (GCT) is a benign, locally aggressive tumor that rarely occurs in the spine. They usually occur in patients between 20 and 40 years of age; some patients with GCT present in hospital with pregnancy. The management of these patients can be challenging. The current study reports a case of GCT located in the sixth thoracic vertebra of a 31-year-old female at 34 weeks of gestation. An osteolytic lesion, 3.5 cm × 3.5 cm in diameter, was identified on CT. An MRI test of the lesion revealed a soft tissue mass involving the T 6-7 vertebrae, extending to the right pedicle of the T 6 vertebra and causing significant spinal cord compression. The patient delivered a healthy boy by cesarean at 35 weeks of gestation. One week later, she underwent a T 6 -T 7 laminectomy, posterior spinal decompression, and instrument fusion. Ultimately, the patient was discharged to inpatient rehabilitation with improved lower extremity strength and returned bowel and bladder function. At the 2-year follow-up, there is no evidence of local reoccurrence and the patient has no constitutional symptoms. The present study also reviews eight similar previously reported cases of GCT in the mobile spine, with a discussion of the demographic characteristics, treatment, and prognosis of pregnant patients. This report adds to the existing literature, making the reader aware that clinical symptoms of GCT in the mobile spine can be misinterpreted as a symptom of pregnancy. For spinal GCT in pregnant women, continued pregnancy and definitive surgery after the baby is born are recommended without any serious nerve damage.

Background: Intralesional excision with curettage is the standard method of giant cell tumor (GCT) treatment, but the ideal filling material after curettage remains controversial. The purpose of this study was to compare the oncological and functional outcomes which underwent cementation or bone grafting after GCT curettage around the knee. Methods: We reported 136 cases with GCTs in distal femur or proximal tibia who accepted curettage from five clinical centers during the last 15 years. All patients were divided into two groups according to filling materials. Recurrence-free survival proportions were used to evaluate oncological outcomes while the Musculoskeletal Tumor Society (MSTS) 93 functional score was used to evaluate functional outcomes. Other parameters including surgical complication, general condition, and radiological classification had been analyzed. The valid statisitical data was analyzed using SPSS 13.0 software. Results: After GCT curettage, 86 patients (63.2%) accepted bone grafting while 50 patients (36.8%) accepted cementation. There was no statistical difference in age, gender, tumor location, radiological classification, fixation, follow-up time, and MSTS 93 functional score between cementation group and bone grafting group. The recurrence-free survival proportions showed that the recurrence rate in bone grafting group was higher than it in cementation group (P = 0.034). Surgical complication was lower in cementation group than that in bone grafting group but without statistically significant difference (P = 0.141). Conclusions: Parameters including patients’ age, gender, tumor location, and radiological classification did not affect surgeons’ treatments in cavity filling after GCT curettage. Cementation should be recommended because of easy usage, the similar postoperative knee function with bone grafting, and the better local tumor control than bone grafting. Key words: Bone Grafting; Cementation; Giant Cell Tumor; Knee

Objective Japanese Orthopaedic Association (JOA) scoring systems were developed to evaluate the neurological function of patients with cervical or lumbar degeneration. As patient-based and multi-dimensional clinical evaluation tools, these systems should be capable of reflecting the walking disability of patients. The association between JOA scores and gait parameters, however, are not well characterized. The purpose of this study was to determine the correlations between JOA scores and gait parameters of patients with cervical spondylotic myelopathy (CSM) and lumbar intervertebral disc herniation (LDH). Methods A total of 32 CSM and 30 LDH patients with gait dysfunction were recruited for the present study. All patients were diagnosed by two senior orthopaedic doctors and evaluated with JOA scoring systems. A body-mounted motion analyzer, the Intelligent Device for Energy Expenditure and Activity (IDEEA), was applied to measure gait parameters of patients across 30 m of flat floor in an orthopaedic ward. A linear regression model was used to determine the correlations between JOA scores and gait parameters. Multiple linear regressions were used to identify the relationships between subsections of the JOA systems and gait parameters. Results Japanese Orthopaedic Association scores of LDH patients from the JOA lumbar scoring system are significantly correlated with gait speed (R 2 = 0.557, P < 0.001) and stride length (R 2 = 0.544, P < 0.001). JOA scores are also correlated with double support duration, step duration, cycle duration and cadence, and weakly correlated with single support duration. For the four subsections of the JOA lumbar scoring system, “restriction of activities of daily living” is the significant predictor of all gait parameters, especially gait speed (R 2 = 0.573, P < 0.001) and stride length (R 2 = 0.553, P < 0.001). However, JOA scores of CSM patients from the JOA cervical scoring system are only weakly correlated with these measures (all R 2 < 0.3). For the four subsections of the JOA cervical scoring system, “motor function of the lower extremity” is a weak predictor of gait parameters (all R 2 < 0.3). Conclusions There is a significant correlation between gait parameters and functional disability as measured by the JOA lumbar scoring system, which indicates that the JOA lumbar scoring system can reflect gait impairment. The JOA cervical scoring system, however, may need to be improved for efficiently evaluating the walking ability of CSM patients in the assessment of motor function of the lower extremity.

Objective To provide useful insights of multidisciplinary surgical treatment for vertebral hemangioma with spinal cord compression. Methods From 2009 to 2014, data on six patients who were diagnosed with cord compression vertebral hemangioma were reviewed and analyzed retrospectively. There were five women and one man with a mean age of 48.6 years (range, 26-68 years). All the patients were treated by multidisciplinary approach, including use of gelfoam, pedicle screw instrumentation, vertebroplasty, and decompression laminectomy. Neurological status and Frankel grades were documented, CT scan and MRI were performed after surgery. Results The follow-up period ranged from 8 to 54 months. Mean blood loss was around 367 mL, and the mean surgical time was 2.30 h. All patients had uneventful intraoperative and postoperative courses and reported symptomatic and neurological relief to varying degrees, at an average follow-up period of 23 months. Bone cement distribution was disseminated homogeneously over the affected vertebra and no leakage was observed. All the patients had a complete restoration to Frankel grade E. The postoperative and follow-up imaging showed that the implant was in perfect position, and no recurrence occurred in all patients. Conclusion The vertebral hemangioma with cord compression is a challenge to surgeons for therapeutic improvement, and an active involvement of several disciplines as well as performance of multidisciplinary surgical treatment can be crucial in achieving favorable results.

A variety of alternative grafts to autologous iliac crest bone (ICBG) have been developed for lumbar spondylodesis, due to frequent complications following ICBG harvest. The optimal alternative graft to ICBG, however, remains elusive till now. The purpose of this study was to compare the efficacy and safety of fusion materials in lumbar degeneration diseases and to provide a ranking spectrum of the grafts. Randomized controlled trials (RCTs) comparing different bone grafts in lumbar arthrodesis were eligible for inclusion. A network meta-analysis was performed for endpoints including fusion rate and incidence of adverse events. Twenty-seven RCTs involving 2488 patients and 13 available interventions were included. rhBMP-2 provided the highest fusion rate, being significantly superior to that of ICBG (OR = 0.21, p

Objectives To summarize the epidemiological characteristics of patients following surgery for spinal metastases retrospectively and make a univariate analysis to identify independent variables that could affect the operation decision making. Methods This was a multicenter retrospective review of patients with spinal metastasis who were treated with surgery from 1 January 2007 to 31 July 2019. Basic clinical data were analyzed retrospectively by univariate analysis to identify independent variables that could affect the decision of operation modalities, including gender, age, spinal metastatic site, Frankel score, Karnofsky performance score (KPS), spinal instability neoplastic score (SINS), visual analogue scale (VAS), Tokuhashi score, urinary and fecal incontinence, spinal pathological fracture, primary tumor, extraspinal metastasis, visceral metastasis, and bone lesion (osteolytic, osteoblastic or mixed). Results A total of 580 patients including 332 males and 248 females were enrolled in the study with an average age of 58.26 years old (range, 13-86 years old). The most common spinal metastatic level was the thoracic vertebra (190 [32.76%]), followed by the lumbar vertebra (146 [25.17%]), cervical vertebra (47 [8.10%]), and sacral vertebra (35 [6.03%]). Metastases involving more than two sites of the cervical, thoracic, lumbar, and sacral vertebrae arose in 162 (27.93%) patients. For primary tumor, there were 198 (34.14%) cases of lung cancer, 41 (7.07%) cases of kidney cancer, 39 (6.72%) cases of breast cancer, 38 (6.55%) cases of gastrointestinal cancer, 35 (6.03%) cases of lymphoma and myeloma, 25 (4.31%) cases of prostate cancer, 24 (4.14%) cases of liver cancer, 23 (3.97%) cases of mesenchymal tissue sarcoma, 20 (3.45%) cases of thyroid cancer, and 84 (14.48%) cases were tumor with unknown origin. Sixty-three (10.86%) patients received minimally invasive surgery, 460 (79.31%) patients received palliative surgery, and the remaining 57 (9.83%) received tumor resection. According to the univariate analysis, the KPS score, SINS score, VAS score, Tokuhashi score, urinary and fecal incontinence, spinal pathological fracture, and bone lesion (osteolytic, osteoblastic or mixed) were independent and favorable factors affecting the surgery modalities. Conclusions Surgical treatment for spinal metastases was mainly to relieve pain, rebuild spinal stability, improve nerve function, control local tumors, and improve the quality of life of patients. For middle-aged and elderly patients with good general conditions, severe pain, spinal pathological fracture, spine instability and without urinary and fecal incontinence, early surgical treatment should be actively carried out.

The most frequently used auto-grafts for ACL reconstruction (ACLR) are bone-patellar tendon-bone (BPTB) and four-strand hamstring tendon (4S-HT), but significant controversy exists about which graft is better. This study aimed to compare the knee outcomes following ACLR with BPTB and 4S-HT autografts.Subgroup meta-analyses were performed basing on available randomised controlled trials (RCTs) according to different follow-up intervals. 23 RCTs were eligible for inclusion, involving 933 participants in each treatment group.Only short-term (≤2 years) knee anteroposterior and rotational stability were significantly poorer with 4S-HT when compared to BPTB autograft, as judged by side-to-side difference on knee laxity (WMD=-0.50, 95%CI -0.81~-0.18, p=0.002) and pivot-shift test (OR=0.58, 95%CI 0.39~0.88, p=0.010), respectively. The IKDC objective grade was evident to be in favour of 4S-HT group in mid-term (3-5 years) follow-up (OR=0.63, 95%CI 0.43~0.92, p=0.017). Several donor-site related complications, including anterior knee pain, pain with kneeling and extension deficit, were more frequent in BPTB autograft group, while lower short-term iskinetic peak flexion torques both at 60°/S (WMD=8.93, 95%CI 7.88~9.99, p0.001) and 240°/S (WMD=11.63, 95%CI 9.92~13.34, p0.001) were caused by HT harvesting.BPTB was associated with inferior mid- to long-term (5 years) knee functional outcomes, and increased frequency of donor-site complications. In contrast, only short-term knee laxity was increased for 4S-HT autograft, which is expected to be improved by providing more conservative rehabilitation protocol and aperture fixation methods.

Background The optimal reconstructive method after diaphyseal malignant bone tumor resection remains controversial. This multicenter clinical study was designed to investigate the clinical value and complications of segmental prosthesis in the repair of diaphyseal defects. Methods We present 49 patients from three clinical centers treated with wide resection for primary or metastatic bone tumors involving the diaphysis of the femur, tibia, humerus, or ulna, followed by reconstruction using a modular intramedullary segmental prosthesis. Results Enrolled patients included 23 men and 26 women with a mean age of 63.3 years. Of these, seven patients had primary bone tumors and 42 patients had metastatic lesions. At the mean follow-up of 13.7 months, 17 patients were alive, 31 patients were deceased due to tumor progression, and one patient was dead of another reason. There were eight nononcologic complications (two with radial nerve injury, three with delayed incision healing, two with aseptic loosening in the proximal humerus prosthetic stem and one with structural failure) and three oncologic complications (three with primary tumor recurrence) among all patients. The incidence of complications in primary tumor patients (4/7, 57.1%) was higher than that in patients with metastatic tumors (7/42, 16.7%) (p = 0.036). Aseptic loosening and mechanical complications were not common for patients with primary tumors, although the reconstruction length difference was statistically significant (p = 0.023). No statistically significant differences were observed in limb function, while the mean musculoskeletal tumor society score was 21.2 in femora, 19.6 in humeri, and 17.8 in tibiae (p = 0.134). Conclusions Segmental prostheses represent an optional method for the reconstruction of diaphyseal defects in patients with limited life expectancy. Segmental prostheses in the humerus experienced more complications than those used to treat lesions in the femur.