Search

Effective dynamic modulation of visible light properties has been significantly desired for advanced imaging and sensing technologies. In particular, phase-change materials have attracted much attention as active material platforms owing to their broadband tunability of optical dielectric functions induced by the temperature-dependent phase-changes. However, their uses for visible light modulators are still limited to meet multi-objective high performance owing to the low material quality factor and active tunability in the visible regime. Here, a design strategy of phase-change metafilm absorber is demonstrated by making the use of the material drawbacks and extending design degree of freedom. By engineering tunability of effective anisotropic permittivity tensor of VO2-Ag metafilm around near-unity absorption conditions, strong dynamic modulation of reflection wave is achieved with near-unity modulation depth at desired wavelength regions without sacrificing bandwidth and efficiency. By leveraging effective medium theory of metamaterial and coupled mode theory, the intuitive design rules and theoretical backgrounds are suggested. It is also noteworthy that the dynamic optical applications of intensity modulation, coloring, and polarization rotation are enabled in a single device. By virtue of ultrathin flat configuration of a metafilm absorber, design extensibility of reflection spectrum is also verified. It is envisioned that our simple and powerful strategy would play a robust role in development of miniaturized light modulating pixels and a variety of photonic and optoelectronic applications.

The development of optical elements has seen tremendous advances over the last few decades for a variety of applications, including displays, cameras, and microscopes. Various optical elements have been developed, ranging from refractive elements to diffractive elements. In recent years, metasurfaces have been in the spotlight to develop next-generation optical elements beyond existing refractive or diffractive optics. A metasurface is a two-dimensional metamaterial composed of subwavelength artificial structures and has been studied for the development of optical elements with the major advantage that the properties of light can be freely adjusted by a thin flat structure. Optical lenses using metasurfaces can be hundreds of times thinner than conventional lenses, while at the same time, provide excellent focusing performance. This suggests that they can be applied to mobile and high-performance imaging applications in the future. Here, we discuss developments of optical elements from refractive or diffractive optics to metasurface optics, including basic principles and properties, current issues, and future perspectives.

Metasurfaces have received enormous attention thanks to their unique ability to modulate electromagnetic properties of light in various frequency regimes. Recently, exploiting its fabrication ease and modulation strength, unprecedented and unique controlling of light that surpasses conventional optical devices has been suggested and studied a lot. Here, in this paper, we discuss some parts of this trend including holography, imaging application, dispersion control, and multiplexing, mostly operating for optical frequency regime. Finally, we will outlook the future of the devices with recent applications of these metasurfaces.

Metasurface color filters (MCFs) have attracted considerable attention thanks to their compactness and functionality as a candidate of an optical element in a miniaturized image sensor. However, conventional dielectric and plasmonic MCFs that have focused on color purity and efficiency cannot avoid reflection in principle, which degrades image quality by optical flare. Here, we introduce absorptive-type MCFs through truncated-cone hyperbolic metamaterial absorbers. By applying a particle swarm optimization method to design multiple parameters simultaneously, the proposed MCF is theoretically and numerically demonstrated in perceptive color on CIELAB and CIEDE2000 with suppressed-reflection. Then, a color filter array is numerically proven in 255 nm of sub-pixel pitch.

We propose an optical switching metasurface in the designed visible region (680 nm) based on circularly polarized light using PB phase. It can generate holographic information encrypted by inserting control light.

We demonstrate the wavelength-selective beam deflector based on the Fano-resonant metasurface, which is composed of rotating double nanorods with metal film as reflector. By combining two concepts of phase modulation, geometric phase and Fano phase, we introduce the wavelength selective characteristics in optical beam switching. Our results can extend the studies for the application of metasurface that requires narrowband as well as broadband, such as optical switching and filtering.

In this paper, temperature- and thickness-dependent variation of dielectric functions of VO 2 film deposited by pulsed-laser deposition is characterized at both insulating and metallic phases by ellipsometry.

Taking the advantage of propagation phase with geometric phase, we designed a novel reflection-type metasurface enabling independent phase control of two polarization states. This method achieves phase control with the high efficiency up to 95%.

We present a novel complex amplitude modulation method for linear polarization from incident circular polarization. We achieved high efficiency up to 98 % with fulfilling continuous and independent modulation of amplitude and phase.

We proposed a refractive index sensor using a phase-compensated cavity whose resonant wavelength can be tuned by the alignment between layers. The structures are composed of double-layered nanoslit array, which has total thickness of 100 nm while the cavity length is 30 nm thick. Using nanoslit array as a reflector has made it possible to design the phase shift carefully so that the subwavelength Fabry-Perot cavity can be obtained. When the cavity is filled with sensing medium, where the field enhancement is achieved by Fabry-Perot (FP) resonance, the proposed structure is found to achieve sensitivity ranging from 337 nm/RIU to 1250 nm/RIU at each different alignment. The resonant wavelength ranges from 1100 nm to 2500 nm, which contains biological windows and telecommunication wavelength range, so the structure is expected to be used in various purposes.

Modern imaging and spectroscopy systems require to implement diverse functionalities with thin thickness and wide wavelength ranges. In order to meet this demand, polarization-resolved imaging has been widely investigated with integrated circular polarizers. However, the circular polarizers which operate at the entire visible wavelengths and have a thickness of several tens of nanometers have not been developed yet. Here, a circular polarizer, operating at the entire visible wavelength range, is demonstrated using helically stacked aluminum nano-grating layers. High extinction ratio and broad operation bandwidth are simultaneously achieved by using non-resonant anisotropic characteristics of the nano-grating. It is theoretically verified that the averaged extinction ratio becomes up to 8 over the entire visible wavelength range while having a thickness of 390 nm. Also, the feasibility of the proposed structure and circular polarization selectivity at the visible wavelength range are experimentally verified. It is expected that the proposed structure will lead to extreme miniaturization of a circular polarizer and contribute greatly to the development of mobile/wearable imaging systems such as virtual reality and augmented reality displays. (C) 2017 Optical Society of America

Active switching of near-field directivity, which is an essential functionality for compact integrated photonics and small optoelectronic elements, has been challenging due to small modulation depth and complicated fabrication methods for devices including active optical materials. Here, we theoretically and experimentally realize a nanoscale active directional switching of surface plasmon polaritons (SPPs) using a phase transition material for the first time. The SPP switching device with noticeable distinction is demonstrated based on the phase transition of vanadium dioxide (VO2) at the telecom wavelength. As the insulator-to-metal phase transition (IMT) of VO2 induces the large change of VO2 permittivity at telecom wavelengths, the plasmonic response of a nanoantenna made of VO2 can be largely tuned by external thermal stimuli. The VO2-insulator-metal (VIM) nanoantenna and its periodic array, the VIM metagrating, are suggested as optical switches. The directional power distinction ratio is designed to change from 8.13:1 to 1:10.56 by the IMT and it is experimentally verified that the ratio changes from 3.725:1 to 1:3.132 as the VIM metagratings are heated up to 90 °C. With an electro-thermally controllable configuration and an optimized resonant design, we expect potential applications of the active switching mechanism for integrable active plasmonic elements and reconfigurable imaging.

Ultra-compact dynamically reconfigurable modulation of optical transmission has been widely studied by using subwavelength-spaced resonant metasurface structures containing reconfigurable optical materials. However, it has been difficult to achieve high transmissivity, large modulation depth, and broad bandwidth simultaneously with the conventional resonance-based metasurface schemes. Here, we propose a reconfigurable phase-transition diffractive grating, made of thick VO2 ridge waveguides, for achieving the above-mentioned three goals simultaneously in the near-infrared range. Based on the large dielectric-to-plasmonic transition characteristic of VO2 in the near-infrared range, diffraction directivity of dual-VO2 ridge waveguide is designed to be tuned by thermally driven phase transition of VO2 for transverse electrically polarized illumination. Then, the diffractive VO2 ridge waveguide grating composed of the periodically arranged dual VO2 ridge waveguides is designed with on-state efficiency around 0.3 and minimum modulation depth about 0.35 over a broad bandwidth of 550 nm (1100-1650 nm). The working principle and excellent modulation performance are thoroughly verified through numerical and experimental studies.

In this paper, the broadband transmissive modulation of polarization and amplitude is demonstrated with high efficiency and tunability using multi-layered aluminum metasurfaces. Broadband and nondispersive optical rotation in the optical frequency region is realized by using Fabry-Pérot-like cavity and phase compensation. Simultaneously, the transmission amplitude can be independently controlled by adjusting the twist angle of the anisotropic metasurfaces. The proposed polarization-amplitude modulators are numerically demonstrated to achieve large tunability with an amplitude modulation depth of 0.95 and maximum rotation angle of 180°.

We propose the active metasurface using phase-change material Ge2Sb2Te5 (GST), which has two distinct phases so called amorphous and crystalline phases, for an ultrathin light path switching device. By arranging multiple anisotropic GST nanorods, the gradient metasurface, which has opposite directions of phase gradients at the two distinct phases of GST, is demonstrated theoretically and numerically. As a result, in the case of normal incidence of circularly polarized light at the wavelength of 1650 nm, the cross-polarized light deflects to −55.6° at the amorphous phase and +55.6° at the crystalline phase with the signal-to-noise ratio above 10 dB.