Search

TFET based label-free biosensors are fast, sensitive and more power efficient as compared to CMOS biosensors, which are prone to short channel effects (SCEs). However, literature is flooded with various TFET biosensors that have become the reason of dilemma for researchers during pandemic situations like COVID-19. Therefore, in this work, a physically doped (PD), charge plasma (CP) and electrically doped (ED) dielectric modulated (DM) TFET based label-free biosensors are compared, which cover almost the entire range of doping and junctionless devices. Also, we found that the ED based TFET biosensors provide better current sensitivities of 5.10 x 10(7), 4.77 x 10(8) and 7.11 x 10(8) for biomolecules with K=12, positive charge= 1 x 10(13) C/cm(2) and negative charge= -1 x 10(13) C/cm(2) respectively. Hence, ED-DM-TFET based biosensors can act as promising candidates to provide better detection and identification quality.

Atomic dispersion of dopants and control over their defect chemistry are central goals in the development of oxide nanoparticles for functional materials with dedicated electronic, optical or magnetic properties. We produced highly dispersed oxide nanocubes with atomic distribution of cobalt ions in substitutional sites of the MgO host lattice via metal organic chemical vapor synthesis. Vacuum annealing of the nanoparticle powders up to 1173 K has no effect on the shape of the individual particles and only leads to moderate particle coarsening. Such materials processing, however, gives rise to the electronic reduction of particle surfaces, which—upon O2 admission—stabilize anionic oxygen radicals that are accessible to UV/Vis diffuse reflectance and electron paramagnetic resonance (EPR) spectroscopy. Multi‐reference quantum chemical calculations show that the optical bands observed mainly originate from transitions into 4A2g (4F), 4T1g (4P) states with a contribution of transitions into 2T1g, 2T2g (2G) states through spin‐orbit coupling and gain intensity through vibrational motion of the MgO lattice or the asymmetric ion field. Related nanostructures are a promising material system for single atomic site catalysis. At the same time, it represents an extremely valuable model system for the study of interfacial electron transfer processes that are key to nanoparticle chemistry and photochemistry at room temperature, and in heterogeneous catalysis., A MgO host lattice with an atomic distribution of cobalt ions in substitutional sites was achieved via metal organic chemical vapor synthesis, providing a promising material system for single atomic site catalysis and a good model system for the study of interfacial electron transfer processes that are key to nanoparticle chemistry and photochemistry at room temperature, and in heterogeneous catalysis.

There is increasing interest in using neuro-stimulation devices to achieve an ergogenic effect in elite athletes. Although the World Anti-Doping Authority (WADA) does not currently prohibit neuro-stimulation techniques, a number of researchers have called on WADA to consider its position on this issue. Focusing on trans-cranial direct current stimulation (tDCS) as a case study of an imminent so-called ‘neuro-doping’ intervention, we argue that the emerging evidence suggests that tDCS may meet WADA’s own criteria (pertaining to safety, performance-enhancing effect, and incompatibility with the ‘spirit of sport’) for a method’s inclusion on its list of prohibited substances and methods. We begin by surveying WADA’s general approach to doping, and highlight important limitations to the current evidence base regarding the performance-enhancing effect of pharmacological doping substances. We then review the current evidence base for the safety and efficacy of tDCS, and argue that despite significant shortcomings, there may be sufficient evidence for WADA to consider prohibiting tDCS, in light of the comparable flaws in the evidence base for pharmacological doping substances. In the second half of the paper, we argue that the question of whether WADA ought to ban tDCS turns significantly on the question of whether it is compatible with the ‘spirit of sport’ criterion. We critique some of the previously published positions on this, and advocate our own sport-specific and application-specific approach. Despite these arguments, we finally conclude by suggesting that tDCS ought to be monitored rather than prohibited due to compelling non-ideal considerations.

Cobalt‐doped zinc oxide single crystals with the shape of hexagonal platelets were synthesized by thermohydrolysis of zinc acetate, cobalt acetate, and hexamethylenetetramine (HMTA) in mixtures of ethanol and water. The mineralization proceeds by a low‐temperature dissolution–reprecipitation process from the liquid phase by the formation of basic cobalt zinc salts as intermediates. The crystal shape as well as twin formation of the resulting oxide phase can be influenced by careful choice of the solvent mixture and the amount of doping. An understanding of the course of the reaction was achieved by comprehensive employment of analytical techniques (i.e., SEM, XRD, IR) including an in‐depth HRTEM study of precipitates from various reaction stages. In addition, EPR as well as UV/Vis spectroscopic measurements provide information about the insertion of the cobalt dopant into the zincite lattice. The Langmuir–Blodgett (LB) technique is shown to be suitable for depositing coatings of the platelets on glass substrates functionalized with polyelectrolyte multilayers and hence is applied for the formation of monolayers containing domains with ordered tessellation. No major differences are found between deposits on substrates with anionic or cationic surface modification. The adherence to the substrates is sufficient to determine the absolute orientation of the deposited polar single crystals by piezoresponse force microscopy (PFM) and Kelvin probe force microscopy (KPFM) studies., Crystal shape: Doping is an effective way to control crystal shape in mineralization processes. Studying the synthesis of single‐crystalline hexagonal platelets of Co‐doped ZnO with advanced high‐resolution transmission electron microscopy (HRTEM) techniques can hereby provide an instructive insight into the details of the formation mechanism.

In the current study, by employing first-principles computations, the adsorption behavior of letrozole (LET) was investigated on the pristine graphdiyne nanosheet (GDY) as well as Si-doped graphdiyne (SiGDY). According to the adsorption energy, charge transfer value, and the change in the bang gap energy, the tendency of the pristine GDY towards LET is insignificant. However, the interaction of LET with SiGDY was strong and the adsorption energy was approximately − 19.20 kcal/mol. In addition, the associated electrical conductivity with SiGDY increased by approximately 23.53 % following the adsorption of LET. The results show that SiGDY can be employed as an electronic sensor to detect LET. Furthermore, LET is detected by SiGDY in the water phase based on the magnitude of solvation energy. Finally, a considerable charge-transfer between LET and SiGDY is a precondition for the adsorption of the LET molecule with proper binding energies, which delivers the Si atoms with a significant positive charge.

Owing to changes in their chemistry and structure, polymers can be fabricated to demonstrate vastly different electrical conductivities over many orders of magnitude. At the high end of conductivity is the class of conducting polymers, which are ideal candidates for many applications in low-cost electronics. Here, we report the influence of the nature of the doping anion at high doping levels within the semi-metallic conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) on its electronic transport properties. Hall effect measurements on a variety of PEDOT samples show that the choice of doping anion can lead to an order of magnitude enhancement in the charge carrier mobility > 3 cm2/Vs at conductivities approaching 3000 S/cm under ambient conditions. Grazing Incidence Wide Angle X-ray Scattering, Density Functional Theory calculations, and Molecular Dynamics simulations indicate that the chosen doping anion modifies the way PEDOT chains stack together. This link between structure and specific anion doping at high doping levels has ramifications for the fabrication of conducting polymer-based devices, The authors acknowledge the European Research Council (ERC-starting-grant 307596), the Swedish foundation for strategic research (project: “Nano-material and Scalable TE materials”), the Knut and Alice Wallenberg foundation (project “Power Paper” and “Tail of the Sun”), The Swedish Energy Agency (3833221), the Swedish Research Council via “Research Environment grant” on “Disposable paper fuel cells” (2016205990), and the Advanced Functional Materials Center at Linköping University. The authors thank Masatsugu Yamashita from the THz Sensing & Imaging Lab at RIKEN in Japan for conducting the THz reflectance spectroscopy experiments. D.R. Evans acknowledges the support of the Australian Research Council through the Future Fellowship scheme (FT160100300). J.W. Andreasen acknowledges the support of the European Research Council (ERC-consolidator-grant 681881). The computations were performed on resources provided by the Swedish National Infrastructure for Computing (SNIC) at NSC.

To promote the interaction of p–n semiconductors, raspberry‐like microspheres of core–shell Cr2O3@TiO2 nanoparticles have been fabricated through a five‐step process. Raman spectroscopy of products calcined at various temperatures reveal that the titania shell causes crystal distortion of the Cr2O3 core, without changing the microstructures of the fabricated core–shell microspheres. In situ and time‐resolved synchrotron‐based powder XRD reveals the formation of monoclinic TiO2 in the fourth step, but these monoclinic TiO2 nanocrystals undergo a phase transition when the applied calcination temperature is above 550 °C. As a result, TiO2(B), a magnéli phase of Ti4O7 and Cr2Ti6O15 compounds, resulting from inner doping between Cr2O3 and TiO2, is formed. The close interaction of Cr2O3 and TiO2 forms a p–n junction that decreases the recombination of photogenerated electron–hole pairs, leading to enhanced production of CH4 by photocatalytic reduction of CO2., Giving CO2 conversion the raspberry: To promote the interaction of p–n semiconductors, raspberry‐like core–shell Cr2O3@TiO2 nanoparticles were fabricated through a five‐step process. The products calcined at different temperatures revealed that the titania shell resulted in the crystal distortion of the Cr2O3 core, without changing the microstructures of the fabricated core–shell microspheres.

Transition metal dichalcogenides (TMDCs) have received attention as atomically thin post‐silicon semiconducting materials. Tuning the carrier concentrations of the TMDCs is important, but their thin structure requires a non‐destructive modulation method. Recently, a surface‐charge transfer doping method was developed based on contacting molecules on TMDCs, and the method succeeded in achieving a large modulation of the electronic structures. The successful dopant is a neutral benzyl viologen (BV0); however, the problem remains of how to effectively prepare the BV0 molecules. A reduction process with NaBH4 in water has been proposed as a preparation method, but the NaBH4 simultaneously reacts vigorously with the water. Here, a simple method is developed, in which the reaction vial is placed on a hotplate and a fragment of air‐stable metal is used instead of NaBH4 to prepare the BV0 dopant molecules. The prepared BV0 molecules show a strong doping ability in terms of achieving a degenerate situation of a TMDC, MoS2. A key finding in this preparation method is that a convection flow in the vial effectively transports the produced BV0 to a collection solvent. This method is simple and safe and facilitates the tuning of the optoelectronic properties of nanomaterials by the easily‐handled dopant molecules.

Manganese‐zinc ferrite nanoparticles were synthesized by using a hydrothermal treatment, coated with silica, and then tested as efficient cellular labels for cell tracking, using magnetic resonance imaging (MRI) in vivo. A toxicity study was performed on rat mesenchymal stem cells and C6 glioblastoma cells. Adverse effects on viability and cell proliferation were observed at the highest concentration (0.55 mM) only; cell viability was not compromised at lower concentrations. Nanoparticle internalization was confirmed by transmission electron microscopy. The particles were found in membranous vesicles inside the cytoplasm. Although the metal content (0.42 pg Fe/cell) was lower compared to commercially available iron oxide nanoparticles, labeled cells reached a comparable relaxation rate R 2, owing to higher nanoparticle relaxivity. Cells from transgenic luciferase‐positive rats were used for in vivo experiments. Labeled cells were transplanted into the muscles of non‐bioluminescent rats and visualized by MRI. The cells produced a distinct hypointense signal in T2‐ or T2*‐weighted MR images in vivo. Cell viability in vivo was verified by bioluminescence.

Thermoelectric generators made by large arrays of nanowires perpendicular to a silicon substrate, that is, so-called silicon nanowire forests are fabricated on large areas by an inexpensive metal-assisted etching technique. After fabrication, a thermal diffusion process is used for doping the nanowire forest with phosphorous. A suitable experimental technique has been developed for the measurement of the Seebeck coefficient under static conditions, and results are reported for different doping parameters. These results are in good agreement with numerical simulations of the doping process applied to silicon nanowires. These devices, based on doped nanowire forests, offer a possible route for the exploitation of the high power factor of silicon, which, combined with the very low thermal conductivity of nanostructures, will yield a high efficiency of the conversion of thermal to electrical energy.

The development of ultrastable carbon materials for potassium storage poses key limitations caused by the huge volume variation and sluggish kinetics. Nitrogen‐enriched porous carbons have recently emerged as promising candidates for this application; however, rational control over nitrogen doping is needed to further suppress the long‐term capacity fading. Here we propose a strategy based on pyrolysis–etching of a pyridine‐coordinated polymer for deliberate manipulation of edge‐nitrogen doping and specific spatial distribution in amorphous high‐surface‐area carbons; the obtained material shows an edge‐nitrogen content of up to 9.34 at %, richer N distribution inside the material, and high surface area of 616 m2 g−1 under a cost‐effective low‐temperature carbonization. The optimized carbon delivers unprecedented K‐storage stability over 6000 cycles with negligible capacity decay (252 mA h g−1 after 4 months at 1 A g−1), rarely reported for potassium storage., Pyrolysis–etching of a pyridine‐coordinated polymer was used to prepare a porous carbon material with defect edge‐enriched N‐6/N‐5 doping, high surface area, and rich distribution of N defects within the material. This carbonaceous material allows full utilization of surface‐dominated capacitive K storage with ultrastable cycling.

The added value of dried blood spot (DBS) samples complementing the information obtained from commonly routine doping control matrices is continuously increasing in sports drug testing. In this project, a robotic-assisted non-destructive hematocrit measurement from dried blood spots by near-infrared spectroscopy followed by a fully automated sample preparation including strong cation exchange solid-phase extraction and evaporation enabled the detection of 46 lower molecular mass (

Amorphous and graphitized nitrogen-doped (N-doped) carbon spheres are investigated as structurally well-defined model systems to gain a deeper understanding of the relationship between synthesis, structure, and their activity in the oxygen reduction reaction (ORR). N-doped carbon spheres were synthesized by hydrothermal treatment of a glucose solution yielding carbon spheres with sizes of 330 ± 50 nm, followed by nitrogen doping via heat treatment in ammonia atmosphere. The influence of a) varying the nitrogen doping temperature (550–1000 °C) and b) of a catalytic graphitization prior to nitrogen doping on the carbon sphere morphology, structure, elemental composition, N bonding configuration as well as porosity is investigated in detail. For the N-doped carbon spheres, the maximum nitrogen content was found at a doping temperature of 700 °C, with a decrease of the N content for higher temperatures. The overall nitrogen content of the graphitized N-doped carbon spheres is lower than that of the amorphous carbon spheres, however, also the microporosity decreases strongly with graphitization. Comparison with the electrocatalytic behavior in the ORR shows that in addition to the N-doping, the microporosity of the materials is critical for an efficient ORR.

The recycling of used Li‐ion batteries is important as the consumption of batteries is increasing every year. However, the recycling of electrode materials is tedious and energy intensive with current methods, and part of the material is lost in the process. In this study, an alternative recycling method is presented to minimize the number of steps needed in the positive electrode recovery process. The electrochemical performance of aged and re‐lithiated Mg−Ti‐doped LiCoO2 and stoichiometric LiCoO2 was investigated and compared. The results showed that after re‐lithiation the structure of original LiCoO2 was restored, the capacity of an aged LiCoO2 reverted close to the capacity of a fresh LiCoO2, and the material could thus be recovered. The re‐lithiated Mg−Ti‐doped LiCoO2 provided rate capability properties only slightly declined from the rate capability of a fresh material and showed promising cyclability in half‐cells., Electrode recycling: Doped and undoped LiCoO2 electrodes collected from aged pouch cells are re‐lithiated electrochemically using metallic lithium as a counter electrode. The performance of an aged and re‐lithiated Mg−Ti‐doped LiCoO2‐containing electrode is close to the performance of the fresh material, which is promising from a recycling point of view.

At the organic–inorganic interface of nanocrystals, electron‐phonon coupling plays an important but intricate role in determining the diverse properties of nanomaterials. Here, it is reported that highly doping of Yb3+ ions within the nanocrystal host can form an energy‐migration network. The networking state Yb3+ shows both distinct Stark splitting peak ratios and lifetime dynamics, which allows quantitative investigations of quenching and thermal activation of luminescence, as the high‐dimensional spectroscopy signatures can be correlated to the attaching and de‐attaching status of surface molecules. By in‐situ surface characterizations, it is proved that the Yb‐O coordination associated with coordinated water molecules has significantly contributed to this reversible effect. Moreover, using this approach, the prime quencher —OH can be switched to —CH in the wet‐chemistry annealing process, resulting in the electron‐phonon coupling probability change. This study provides the molecular level insights and dynamics of the surface dark layer of luminescent nanocrystals., Doping Yb3+ ions in nanocrystals, particularly at high concentrations, enables the Yb3+ ions to constitute energy transfer network and display many distinct dynamic features, including the temperature‐responsive Yb3+ lifetimes and Stark splitting spectra. This allows us to achieve the molecular‐level understanding of the organic–inorganic interface interactions and their relations to the luminescence behaviors.

A series of single InGaN/GaN quantum wells (QWs) with a Si-doped InGaN underlayer were studied to investigate the impact of the underlayer on photoluminescence efficiency and recombination dynamics. The thickness of the GaN capping layer was varied between samples, which changed the electric field across the QW due to band bending near the surface. When directly exciting the wells, thermionic emission of carriers results in a rapid drop in the photoluminesence efficiency with increasing temperature such that no emission is observed above 100 K. However, exciting above the energy of the barriers caused the intensity of the QW emission to drop more slowly, with up to 12% of the 10 K emission intensity remaining at 300 K. This difference is attributed to hole transfer from the underlayer into the QW, which increases in efficiency at higher temperatures, and is enhanced by stronger electric fields present in the GaN barriers of samples with thinner GaN capping layers. Further, the sample with the narrowest cap layer of 2 nm has a different shape and characteristic time for its photoluminescence decay transient and a different emission energy temperature dependence than the other samples. This behaviour was ascribed to a change in carrier localisation for this sample due to a reversal of the net field across the well compared to the other samples.

Inorganic perovskite solar cells (PSCs) have witnessed great progress in recent years due to their superior thermal stability. As a representative, CsPbI2Br is attracting considerable attention as it can balance the high efficiency of CsPbI3 and the stability of CsPbBr3. However, most research employs doped charge transport materials or applies bilayer transport layers to obtain decent performance, which vastly complicates the fabrication process and scarcely satisfies the commercial production requirement. In this work, all‐layer‐doping‐free inorganic CsPbI2Br PSCs using organic ligands armored ZnO as the electron transport materials achieve an encouraging performance of 16.84%, which is one of the highest efficiencies among published works. Meanwhile, both the ZnO‐based CsPbI2Br film and device show superior photostability under continuous white light‐emitting diode illumination and improved thermal stability under 85 °C. The remarkable enhanced performance arises from the favorable organic ligands (acetate ions) residue in the ZnO film, which not only can conduce to maintain high crystallinity of perovskite, but also passivate traps at the interface through cesium/acetate interactions, thus suppressing the photo‐ and thermal‐ induced perovskite degradation., An inorganic CsPbI2Br perovskite solar cell employing organic ligands armored ZnO as the electron transport materials achieves a maximum power conversion efficiency of 16.84%, with superior photo‐ and thermal‐ stabilities.

Optical thermal sensing holds great promise for disease theranostics. However, traditional ratiometric thermometry methods, in which intensity ratio of two nonoverlapping emissions is defined as the thermosensitive parameter, may have a limited accuracy in temperature read‐out due to the deleterious interference from wavelength‐ and temperature‐dependent photon attenuation in tissue. To overcome this limitation, a dual‐excitation decoding strategy based on NIR hybrid nanocomposites comprising self‐assembled quantum dots (QDs) and Nd3+ doped fluoride nanocrystals (NCs) is proposed for thermal sensing. Upon excitation at 808 nm, the intensity ratio of two emissions at identical wavelength (1057 nm) from QDs and NCs, respectively, is defined as the thermometric parameter R. By employing another 830 nm laser beam following the same optical path as 808 nm laser to exclusively excite QDs, the two overlapping emissions can be easily decoded. The acquired R proves to be inert to the detection depth in tissue, with a minimized temperature reading error of ≈2.3 °C at 35 °C (at a depth of ≈1.1 mm), while the traditional thermometry mode based on the nonoverlapping 1025 and 863 nm emissions may exhibit a large error of ≈43.0 °C. The insights provided by this work pave the way toward high‐accuracy deep‐tissue biosensing., A dual‐excitation decoding strategy, which uses the intensity ratio of two overlapping NIR emissions from self‐assembled QDs and Nd3+ doped fluoride NCs in the hybrid nanocomposites, respectively, as the ratiometric thermometric parameter, is proposed for high‐accuracy thermal sensing in vivo.

Flexible electroactive cellulose-based substrates were successfully fabricated via electropolymerization either polypyrrole (PPy) or poly(3,4-ethylenedioxythiophene) (PEDOT) in the presence of sodium dodecyl sulfate (SDS) onto platinum-coated cellulose substrates. Results showed that the conductive polymers were evenly deposited onto the platinum-coated cellulose substrates, respectively without compromising the submicro roughness topography of the substrate. In fact, nanoroughness feature was formed by the deposition of conductive polymers on the individual fibres of the cellulose paper, both of which are highly important in regulating cell adhesion, proliferation and migration. The various electroactive cellulose-based papers exhibited good mechanical and structural properties as well as good cytocompatibility by supporting the attachment and proliferation of immortalized human keratinocytes (HaCaT cells). In addition, copper (Cu2+) and the zinc (Zn2+) ions were proved to be successfully doped into these PPy- and PEDOT-cellulose substrates. The PEDOT resulted in the higher doping of Cu2+ and Zn2+ ions, which was confirmed by the ions release studies. Furthermore, the PEDOT-cellulose substrates exhibited significantly higher mechanical properties, better initial cell attachment and higher electrochemical capacitance as compared to PPy-cellulose substrates. Overall, the results suggested that the PEDOT-cellulose substrates could potentially be a better choice of smart skin dressings, integration interface between skin and artificial devices or implantable electronic materials. Economic Development Board (EDB) Nanyang Technological University Accepted version

Trivalent lanthanide (Ln3+)‐doped hollow upconversion nanocrystals (UCNCs) usually exhibit unique optical performance that cannot be realized in their solid counterparts, and thus have been receiving tremendous interest from their fundamentals to diverse applications. However, all currently available Ln3+‐doped UCNCs are solid in appearance, the preparation of hollow UCNCs remains nearly untouched hitherto. Herein, a class of UCNCs based on Yb3+/Er3+‐doped tetralithium zirconium octafluoride (Li4ZrF8:Yb/Er) featuring 2D layered crystal lattice is reported, which makes the fabrication of hollow UCNCs with a peasecod‐like shape possible after Ln3+ doping. By employing the first‐principle calculations, the unique peasecod‐like hollow nanoarchitecture primarily associated with the hetero‐valence Yb3+/Er3+ doping into the 2D layered crystal lattice of Li4ZrF8 matrix is revealed. Benefiting from this hollow nanoarchitecture, the resulting Li4ZrF8:Yb/Er UCNCs exhibit an abnormal green upconversion luminescence in terms of the population ratio between two thermally coupled states (2H11/2 and 4S3/2) of Er3+ relative to their solid Li2ZrF6:Yb/Er counterparts, thereby allowing to prepare the first family of hollow Ln3+‐doped UCNCs as supersensitive luminescent nanothermometer with almost the widest temperature sensing range (123–800 K). These findings described here unambiguously pave a new way to fabricate hollow Ln3+‐doped UCNCs for numerous applications., A class of peasecod‐like hollow Yb3+/Er3+‐doped Li4ZrF8 upconverting nanocrystals (UCNCs) that features a 2D layered crystal lattice is reported. Abnormal green upconverting luminescence that cannot be achieved in the solid UCNCs is observed in these peasecod‐like hollow UCNCs, thereby making them suitable as supersensitive nanothermometers with a wide temperature range for optical temperature sensing.

Molecular doping allows enhancement and precise control of electrical properties of organic semiconductors, and is thus of central technological relevance for organic (opto‐) electronics. Beyond single‐component molecular electron acceptors and donors, organic salts have recently emerged as a promising class of dopants. However, the pertinent fundamental understanding of doping mechanisms and doping capabilities is limited. Here, the unique capabilities of the salt consisting of a borinium cation (Mes2B+; Mes: mesitylene) and the tetrakis(penta‐fluorophenyl)borate anion [B(C6F5)4]− is demonstrated as p‐type dopant for polymer semiconductors. With a range of experimental methods, the doping mechanism is identified to comprise electron transfer from the polymer to Mes2B+, and the positive charge on the polymer is stabilized by [B(C6F5)4]−. Notably, the former salt cation leaves during processing and is not present in films. The anion [B(C6F5)4]− even enables the stabilization of polarons and bipolarons in poly(3‐hexylthiophene), not yet achieved with other molecular dopants. From doping studies with high ionization energy polymer semiconductors, the effective electron affinity of Mes2B+[B(C6F5)4]− is estimated to be an impressive 5.9 eV. This significantly extends the parameter space for doping of polymer semiconductors., The salt of the cation (Mes2B+; Mes: mesitylene) and the anion [B(C6F5)4]− is introduced as superior p‐type dopant for organic semiconductors. The doping mechanism involves electron transfer from the semiconductor to Mes2B+, and the positive charge is stabilized by [B(C6F5)4]−. For poly(3‐hexylthiophene), the anion even stabilizes bipolarons. The effective electron affinity of Mes2B+[B(C6F5)4]− is estimated to be 5.9 eV.

Controlling the growth behavior of organic semiconductors (OSCs) is essential because it determines their optoelectronic properties. In order to accomplish this, graphene templates with electronic‐state tunability are used to affect the growth of OSCs by controlling the van der Waals interaction between OSC ad‐molecules and graphene. However, in many graphene‐molecule systems, the charge transfer between an ad‐molecule and a graphene template causes another important interaction. This charge‐transfer‐induced interaction is never considered in the growth scheme of OSCs. Here, the effects of charge transfer on the formation of graphene–OSC heterostructures are investigated, using fullerene (C60) as a model compound. By in situ electrical doping of a graphene template to suppress the charge transfer between C60 ad‐molecules and graphene, the layer‐by‐layer growth of a C60 film on graphene can be achieved. Under this condition, the graphene–C60 interface is free of Fermi‐level pinning; thus, barristors fabricated on the graphene–C60 interface show a nearly ideal Schottky–Mott limit with efficient modulation of the charge‐injection barrier. Moreover, the optimized C60 film exhibits a high field‐effect electron mobility of 2.5 cm2 V−1 s−1. These results provide an efficient route to engineering highly efficient optoelectronic graphene–OSC hybrid material applications., The growth behavior of fullerene (C60) thin films on graphene templates where charge transfer occurs is presented. The number of electrons transferred from graphene to C60 is controlled by in situ electrical gating of graphene during C60 deposition. When this electron transfer is suppressed, high‐crystalline C60 thin films are achieved for highly efficient optoelectronic applications.

Hybridizing graphene and molecules possess a high potential for developing materials for new applications. However, new methods to characterize such hybrids must be developed. Herein, the wet‐chemical non‐covalent functionalization of graphene with cationic π‐systems is presented and the interaction between graphene and the molecules is characterized in detail. A series of tricationic benzimidazolium salts with various steric demand and counterions was synthesized, characterized and used for the fabrication of graphene hybrids. Subsequently, the doping effects were studied. The molecules are adsorbed onto graphene and studied by Raman spectroscopy, XPS as well as ToF‐SIMS. The charged π‐systems show a p‐doping effect on the underlying graphene. Consequently, the tricationic molecules are reduced through a partial electron transfer process from graphene, a process which is accompanied by the loss of counterions. DFT calculations support this hypothesis and the strong p‐doping could be confirmed in fabricated monolayer graphene/hybrid FET devices. The results are the basis to develop sensor applications, which are based on analyte/molecule interactions and effects on doping., Organic star‐shaped tricationic molecules interact with graphene and a one‐electron transfer from graphene to the molecules leads to strong p‐doping.

ChemSusChem 13(12), 3243 - 3251 (2020). doi:10.1002/cssc.202000407, The direct synthesis of H$_2$O$_2$ from H$_2$ and O$_2$ is a strongly desired reaction for green processes and a promising alternative to the commercialized anthraquinone process. The design of efficient catalysts with high activity and H$_2$O$_2$ selectivity is highly desirable and yet challenging. Metal dopants enhance the performance of the active phase by increasing reaction rates, stability, and/or selectivity. The identification of efficient dopants relies mostly on catalysts prepared with a random and non-uniform deposition of active and promoter phases. To study the promotional effects of metal doping on Pd catalysts, we employ colloidal, bimetallic nanocrystals (NCs) to produce catalysts in which the active and doping metals are colocalized to a fine extent. In the absence of any acid and halide promotors, PdSn and PdGa NCs supported on acid-pretreated TiO$_2$ (PdSn/s-TiO$_2$, PdGa/s-TiO$_2$) were highly efficient and outperformed the monometallic Pd catalyst (Pd/s-TiO$_2$), whereas in the presence of an acid promotor, the overall H$_2$O$_2$ productivity was also further enhanced for the Ni-, Ga-, In-, and Sn-doped catalysts with respect to Pd/s-TiO$_2$., Published by Wiley-VCH, Weinheim

Ceria particles play a key role in catalytic applications such as automotive three‐way catalytic systems in which toxic CO and NO are oxidized and reduced to safe CO2 and N2, respectively. In this work, we explore the incorporation of Cu and Cr metals as dopants in the crystal structure of ceria nanorods prepared by a single‐step hydrothermal synthesis. XRD, Raman and XPS confirm the incorporation of Cu and Cr in the ceria crystal lattices, offering ceria nanorods with a higher concentration of oxygen vacancies. XPS also confirms the presence of Cr and Cu surface species. H2‐TPR and XPS analysis show that the simultaneous Cu and Cr co‐doping results in a catalyst with a higher surface Cu concentration and a much‐enhanced surface reducibility, in comparison with either undoped or singly doped (Cu or Cr) ceria nanorods. While single Cu doping enhances catalytic CO oxidation and Cr doping improves catalytic NO reduction, co‐doping with both Cu and Cr enhances the benefits of both dopants in a synergistic manner employing roughly a quarter of dopant weight., Doped up for detox: Ceria particles play a key role in catalytic applications such as automotive three‐way catalytic systems in which toxic CO and NO are respectively oxidized and reduced to safe CO2 and N2. We explored the incorporation of Cu and Cr metals as dopants in the crystal structure of ceria nanorods prepared by a single‐step hydrothermal synthesis. Such co‐doped ceria nanorods show synergistic improvement in reducibility and enhanced performance for CO oxidation and NO reduction.

This paper details the application of phosphorus monolayer doping of silicon on insulator substrates. There have been no previous publications dedicated to the topic of MLD on SOI, which allows for the impact of reduced substrate dimensions to be probed. The doping was done through functionalization of the substrates with chemically bound allyldiphenylphosphine dopant molecules. Following functionalization, the samples were capped and annealed to enable the diffusion of dopant atoms into the substrate and their activation. Electrical and material characterisation was carried out to determine the impact of MLD on surface quality and activation results produced by the process. MLD has proven to be highly applicable to SOI substrates producing doping levels in excess of 1 × 1019 cm−3 with minimal impact on surface quality. Hall effect data proved that reducing SOI dimensions from 66 to 13 nm lead to an increase in carrier concentration values due to the reduced volume available to the dopant for diffusion. Dopant trapping was found at both Si–SiO2 interfaces and will be problematic when attempting to reach doping levels achieved by rival techniques.

We study the allylic oxidation of cyclohexene with dioxygen under mild conditions in the presence of transition-metal catalysts. The catalysts are comprised of nanometric metal oxide particles supported on porous nitrogen-doped carbons (M/N:C, where M = V, Cr, Fe, Co, Ni, Cu, Nb, Mo, and W). Most of these metal oxides give only moderate conversions, whereof the majority of the products are over-oxidation products. Co/N:C and Cu/N:C, however, give 70-80% conversion and 40-50% selectivity to the ketone product, cyclohexene-2-one. Control experiments using free-radical scanvengers shows that the oxidation follows the expected free-radical pathway in almost all cases. Surprisingly, the catalytic cycle in the presence of Cu/N:C does not involve free-radical species in solution. Optimisation of this catalyst gives >85% conversion with >60% selectivity to the allylic ketone, at 70 °C and 10 bar oxygen pressure. Scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction studies show that the active particles have a cupric oxide/cuprous oxide core/shell structure, with a correspondingly high TOF of ca. 1500 h-1. We attribute the high performance of this Cu/N:C catalyst to a facile surface reaction between adsorbed cyclohexenyl hydroperoxide molecules and activated oxygen species.

The emerging CsPbI3 perovskites are highly efficient and thermally stable materials for wide‐band gap perovskite solar cells (PSCs), but the doped hole transport materials (HTMs) accelerate the undesirable phase transition of CsPbI3 in ambient. Herein, a dopant‐free D‐π‐A type HTM named CI‐TTIN‐2F has been developed which overcomes this problem. The suitable optoelectronic properties and energy‐level alignment endow CI‐TTIN‐2F with excellent charge collection properties. Moreover, CI‐TTIN‐2F provides multisite defect‐healing effects on the defective sites of CsPbI3 surface. Inorganic CsPbI3 PSCs with CI‐TTIN‐2F HTM feature high efficiencies up to 15.9 %, along with 86 % efficiency retention after 1000 h under ambient conditions. Inorganic perovskite solar modules were also fabricated that exhibiting an efficiency of 11.0 % with a record area of 27 cm2. This work confirms that using efficient dopant‐free HTMs is an attractive strategy to stabilize inorganic PSCs for their future scale‐up., A dopant‐free D‐π‐A type HTM named CI‐TTIN‐2F has been developed which shows excellent charge collection properties and multisite defect‐healing effects. All‐inorganic CsPbI3 PSCs with CI‐TTIN‐2F HTM feature high efficiencies up to 15.9 %, along with 86 % efficiency retention after 1000 h under ambient conditions. All‐inorganic perovskite solar modules were also fabricated that exhibit an efficiency of 11.0 % with a record area of 27 cm2.

Polyacrylonitrile (PAN)-based carbon felt was subjected to N2-plasma treatment to increase the heteroatom defects and reactive edge sites as a method to increase the performance in vanadium redox flow batteries (VRFBs). N-doping in the felt was mainly in the form of pyrrolic and pyridinic nitrogen. Even though the amount of oxygen functional groups on the N2-plasma-treated sample was very low, the felt showed enhanced electrochemical performance for both V3+/V2+ as well as V5+/V4+ redox reactions. The result is highly significant as the pristine electrode with the same amount of oxygen functional groups showed significantly less activity for the V3+/V2+ redox reaction. Overall, the single-flow cell experiments with N2-plasma-treated felt showed superior performance compared to the pristine sample. Therefore, the enhanced performance observed for the N2-plasma-treated sample should be attributed to the increase in defects and edge sites. Thus, from the present study, it can be concluded that an alternate way to increase the performance of the VRFBs is to introduce specific defects such as N-doping/substitution or to increase the edge sites. In other words, defects induced in the carbon felt such as heteroatom doping are as beneficial as the presence of oxygen functional groups for the improved performance of VRFBs. Therefore, for an optimum performance of VRFBs, defects such as N-substitution as well as oxygen functionality should be tuned.

Herein, we synthesized P- and N-doped carbon materials (PN-doped carbon materials) through controlled phosphoric acid treatment (CPAT) of folic acid (FA) and probed their ability to catalyze the oxygen reduction reaction (ORR) at the cathode of a fuel cell. Precursors obtained by heating FA in the presence of phosphoric acid at temperatures of 400–1000 °C were further annealed at 1000 °C to afford PN-doped carbon materials. The extent of precursor P doping was maximized at 700 °C, and the use of higher temperatures resulted in activation and increased porosity rather than in increased P content. The P/C atomic ratios of PN-doped carbon materials correlated well with those of the precursors, which indicated that CPAT is well suited for the preparation of PN-doped carbon materials. The carbon material prepared using a CPAT temperature of 700 °C exhibited the highest ORR activity and was shown to contain –C–PO2 and –C–PO3 moieties as the major P species and pyridinic N as the major N species. Moreover, no N–P bonds were detected. It was concluded that the presence of –C–PO2 and –C–PO3 units decreases the work function and thus raises the Fermi level above the standard O2/H2O reduction potential, which resulted in enhanced ORR activity. Finally, CPAT was concluded to be applicable to the synthesis of PN-doped carbon materials from N-containing organic compounds other than FA.

We study the orientational transitions in a suspension of carbon nanotubes in a nematic liquid crystal induced by an external magnetic field. The case of a finite orientational anchoring of liquid crystal molecules at the surface of doped carbon nanotubes is considered. It is shown that in a magnetic field the initial homogeneous planar texture of the liquid crystal–carbon nanotubes mixture is disturbed in a threshold manner (Fréedericksz transition). The orientational and concentration distributions of the suspension are studied for different values of the magnetic field strength and segregation intensity of the impurity subsystem. The optical phase lag between ordinary and extraordinary rays of light transmitted through a layer of a liquid crystal composite is calculated. The possibility of changing the nature of the Fréedericksz transition from second order to first order is shown. This tricritical behavior is related to the redistribution of the carbon nanotubes (segregation effect) inside the layer.

PubMed: 31293857, Phosphors can serve as color conversion layers to generate white light with varying optical features, including color rendering index (CRI), high correlated color temperature (CCT), and luminous efficacy. However, they are typically produced under harsh synthesis conditions such as high temperature, high pressure, and/or by employing a large amount of solvent. In this work, a facile, water-based, rapid method has been proposed to fabricate lanthanide-doped hydroxide-based phosphors. In this sense, sub-micrometer-sized Y(OH)(3):Eu3+ particles (as red phosphor) were synthesized in water at ambient conditions in

Recently, metal‐free, heteroatom‐doped carbon nanomaterials have emerged as promising electrocatalysts for the oxygen evolution reaction (OER), but their synthesis is a tedious process involving energy‐wasting calcination. Molecular electrocatalysts offer attractive catalysts for the OER. Here, phytic acid (PA) was selected to investigate the OER activity of carbons in organic molecules by DFT calculations and experiments. Positively charged carbons on PA were very active towards the OER. The PA molecules were fixed into a porous, conductive hydrogel with a superhydrophilic surface. This outperformed most metal‐free electrocatalysts. Besides the active sites on PA, the high OER activity was also related to the porous and conductive networks on the hydrogel, which allowed fast charge and mass transport during the OER. Therefore, this work provides a metal‐free, organic‐molecule‐based electrocatalyst to replace carbon nanomaterials for efficient OER.

Nanofocused X-ray beam induced current (XBIC) is used to quantitatively map the spatially dependent carrier collection probability within single nanowires., Here it is demonstrated how nanofocused X-ray beam induced current (XBIC) can be used to quantitatively map the spatially dependent carrier collection probability within nanostructured solar cells. The photocurrent generated by a 50 nm-diameter X-ray beam was measured as a function of position, bias and flux in single p–i–n doped solar-cell nanowires. The signal gathered mostly from the middle segment decays exponentially toward the p- and n-segments, with a characteristic decay length that varies between 50 nm and 750 nm depending on the flux and the applied bias. The amplitude of the XBIC shows saturation at reverse bias, which indicates that most carriers are collected. At forward bias, the relevant condition for solar cells, the carrier collection is only efficient in a small region. Comparison with finite element modeling suggests that this is due to unintentional p-doping in the middle segment. It is expected that nanofocused XBIC could be used to investigate carrier collection in a wide range of nanostructured solar cells.

Multifunctional nanomaterials that have integrated diagnostic and therapeutic functions and low toxicity, and can enhance treatment efficacy through combination therapy have drawn tremendous amounts of attention. Herein, a newly developed multifunctional theranostic agent is reported, which is PEGylated W-doped TiO2 (WTO) nanoparticles (NPs) synthesized via a facile organic route, and the results demonstrated strong absorbance of these WTO NPs in the second near-infrared (NIR-II) window due to successful doping with W. These PEGylated WTO NPs can absorb both NIR-II laser and ionizing radiation, rendering them well suited for dual-modal computed tomography/NIR-II photoacoustic imaging and synergistic NIR-II photothermal/radiotherapy of tumors. In addition, the long-term in vivo studies indicated that these PEGylated WTO NPs had no obvious toxicity on mice in vivo, and they can be cleared after a 30-day period. In summary, this multifunctional theranostic agent can absorb both NIR-II laser and ionizing radiation with negligible toxicity and rapid clearance, therefore it has great promise for applications in imaging and therapeutics in biomedicine.

Graphic abstract An outbreak of respiratory disorder caused by coronavirus has been named as coronavirus infection 2019 (COVID-19). To find a specific treatment against this disease researchers are at the frontline. To cure COVID-19, favipiravir (FPV) has been reported as an effective drug based on its high recovery rate. Among nanomaterials, fullerene C60 has achieved enormous attention as a drug delivery vehicle due to its good bioavailability and low toxicity. Hence, in this work, we have investigated the potential of metal-doped fullerene as a drug carrier, based on DFT calculations by using M06-2X functional and 6-31G(d) basis set in water media. In this research electronic parameters and adsorption energy of FPV on interaction with metal-doped (Cr, Fe, and Ni) fullerene is studied. The charge transfer between drug and doped fullerene has been studied through electrophilicity indexes. The structural and electronic properties are explored in terms of adsorption energy through frontier molecular orbital (FMO) and density of state (DOS). It is observed that doping of fullerene C60 with Cr, Fe, and Ni metals significantly enhances the drug delivery rate and provides numerous advantages including controlled drug release at specific target sites which minimize the generic collection in vivo and reduce the side effects. Thusly, it is suggested that our designed metal-doped complexes might be efficient candidates as drug delivery materials for COVID-19 infection. Supplementary Information The online version contains supplementary material available at 10.1007/s11696-021-01815-4.

Chlorine is found to be a suitable element for the modification of polymeric carbon nitride properties towards an efficient visible-light photocatalytic activity. In this study, chlorine-doped polymeric carbon nitride (Cl-PCN) has been examined as a photocatalyst in the hydrogen evolution reaction. The following aspects were found to enhance the photocatalytic efficiency of Cl-PCN: (i) unique location of Cl atoms at the interlayers of PCN instead of on its π-conjugated planes, (ii) slight bandgap narrowing, (iii) lower recombination rate of the electron–hole pairs, (iv) improved photogenerated charge transport and separation, and (v) higher reducing ability of the photogenerated electrons. The above factors affected the 4.4-fold enhancement of the photocatalytic efficiency in hydrogen evolution in comparison to the pristine catalyst.

Upconversion nanoparticles (UCNPs), consisting of NaYF4 doped with 18% Yb and 2% Er, were coated with microporous silica shells with thickness values of 7 ± 2 and 21 ± 3 nm. Subsequently, the negatively charged particles were functionalized with N-(6-aminohexyl)-3-aminopropyltrimethoxysilane (AHAPS), which provide a positive charge to the nanoparticle surface. Inductively coupled plasma optical emission spectrometry (ICP-OES) measurements revealed that, over the course of 24h, particles with thicker shells release fewer lanthanide ions than particles with thinner shells. However, even a 21 ± 3 nm thick silica layer does not entirely block the disintegration process of the UCNPs. 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assays and cell cytometry measurements performed on macrophages (RAW 264.7 cells) indicate that cells treated with amino-functionalized particles with a thicker silica shell have a higher viability than those incubated with UCNPs with a thinner silica shell, even if more particles with a thicker shell are taken up. This effect is less significant for negatively charged particles. Cell cycle analyses with amino-functionalized particles also confirm that thicker silica shells reduce cytotoxicity. Thus, growing silica shells to a sufficient thickness is a simple approach to minimize the cytotoxicity of UCNPs.

This paper presents a parallel plate-type field emission device of potassium hydroxide-doped electrochemically reduced graphene oxide (GO) manufactured using highly oriented pyrolytic graphite through electrochemical exfoliation. The material properties of the GO were tested through Raman spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The optimal electron emission characteristics of the device were as follows: turn-on field = 2.03 V/ $\mu \text{m}$ , field emission current $= \,\, 16.4~\mu \text{A}$ , and field emission enhancement factor = 8377. At an emission peak wavelength of 563.7 nm, the optimal device had a light flux of 4.21 lumens and an illumination of 140.3 lux. These properties can be utilized in various optoelectronic devices, such as nanoelectronics devices, sensors, electrochemical systems, and energy storage devices.

Compared to metallic materials for the use of heat exchanger, polymeric materials have been enjoyed superior advantages such as corrosion resistance, low density, fouling resistance, facile processing and low cost. Poly(vinylidene fluoride) (PVDF) is semi-crystalline thermoplastic polymer with excellent corrosion resistance, thermal and electrochemical stability. In order to improve its thermal conductivity, graphene/PVDF composites were prepared and studied in this paper. The graphene was doped in PVDF matrix for preparing graphene/PVDF composite membranes. In addition, electric field was applied for graphene alignment during membrane formation. The morphology, structure, thermal conductivity and tensile strength of the composite membranes before and after alignment were characterized and analyzed. The tensile strength and thermal conductivity of composite membranes were significant improved with the addition of graphene. This tendency was further enhanced by the application of electric field. When graphene content was 20 wt%, the thermal conductivity of the composite membrane was increased by 212% than that of pure PVDF and it was further enhanced to 226% after applying electric field. The maximum tensile strength was obtained when graphene content was 3 wt%. This study may be beneficial to further development of thermal conductive polymeric materials. Keywords: Poly(vinylidene fluoride), Graphene, Composite membranes, Thermal conductivity

The synthesis of O‐doped polyaromatic hydro‐ carbons in which two polycyclic aromatic hydrocarbon sub units are bridged through one or two O atoms has been achieved. This includes high‐yield ring‐closure key steps that, depending on the reaction conditions, result in the formation of furanyl or pyranopyranyl linkages through intramolecular C−O bond formation. Comprehensive photophysical measurements in solution showed that these compounds have exceptionally high emission yields and tunable absorption properties throughout the UV/Vis spectral region. Electrochemical investigations showed that in all cases O annulation increases the electron‐donor capabilities by raising the HOMO energy level, whereas the LUMO energy level is less affected. Moreover, third‐order nonlinear optical (NLO) measurements on solutions or thin films containing the dyes showed very good values of the second hyperpolarizability. Importantly, poly(methyl methacrylate) films containing the pyranopyranyl derivatives exhibited weak linear absorption and NLO absorption compared to the nonlinearity and NLO refraction, respectively, and thus revealed them to be exceptional organic materials for photonic devices.

A novel scotch tape assisted direct transfer of graphene onto different flexible and rigid substrates, including paper, polyethylene terephthalate, flat and curved glass, SiO2/Si, and a solution-processed high-k dielectric layer is presented. This facile graphene transfer process is driven by the difference in adhesion energy of graphene with respect to tape and a target substrate. In addition, the graphene films transferred by scotch tape are found to be cleaner, more continuous, less doped and higher-quality than those transferred by PMMA. Based on that, the tape transferred graphene is employed as a carrier transport layer in oxide thin-film transistors (TFTs) with different gate dielectrics (i.e., SiO2 and high-k ZrO2). The In2O3/graphene/SiO2 TFTs exhibit a high electron mobility of 404 cm2 V−1 s−1 and a high on/off current ratio of 105, while the counterpart In2O3/graphene/ZrO2 TFTs exhibit improved electron transport properties at an ultra-low operating voltage of 3 V, which is 20 times lower than that of SiO2-based devices. In contrast, the ZrO2-based TFTs with PMMA-transferred graphene exhibit no detective electrical properties. Therefore, the proposed scotch tape assisted transfer method will be particularly useful for the production of graphene films and other two-dimensional materials in more cost-effective and environmentally friendly modes for broad practical applications beyond graphene-based field-effect transistors (GFETs).