Search

This paper investigates the impact and potential use of the cut cell vertical discretisation for forecasts of 5 days and climate simulations. A first indication of the usefulness of this new method is obtained by a set of five-day forecasts, covering January 1989 by forecasts. The model area was chosen to include much of Asia, the Himalayas and Australia. The cut cell model LMZ provides a much more accurate representation of mountains on model forecasts than the terrain following coordinate used for comparison. Therefore we are in particular interested in potential forecast improvements in the target area downwind of the Himalaya, over South East China, Korea and Japan. The LMZ has been tested so far extensively for one-day forecasts on an European area. Following indications of a reduced temperature error for the short forecasts, this paper investigates the model error for five days in an area influenced by strong orography. The forecasts indicated a strong impact of the cut cell discretisation on forecast quality. The cut cell model is available only of an older (2003) Version of the model LM. It was compared using a control model differing by the use of the terrain following coordinate only. The cut cell model improved the precipitation forecasts of this old control model everywhere by a large margin. An improved version of the terrain following model LM has been developed since then under the name CLM. The CLM has been used and tested in all climates, while the LM was used for small areas in higher latitudes. The precipitation forecasts of cut cell model were compared also to the CLM. As the cut cell model LMZ did not incorporate the developments for CLM since 2003, the precipitation forecast of the CLM was not improved in all aspects. However, for the target area downstream of the Himalaya, the cut cell model improved the prediction of the monthly precipitation forecast even in comparison with the modern model version CLM considerably. The cut cell discretisation seems to improve in particular the localisation of precipitation, while the improvements leading from LM to CLM had a positive effect mainly on amplitude. [ABSTRACT FROM AUTHOR]

By coordinating the design and distribution of global climate model simulations of the past, current and future climate, the Coupled Model Intercomparison Project (CMIP) has become one of the foundational elements of climate science. However, the need to address an ever-expanding range of scientific questions arising from more and more research communities has made it necessary to revise the organization of CMIP. After a long and wide community consultation, a new and more federated structure has been put in place. It consists of three major elements: (1) a handful of common experiments, the DECK (Diagnostic, Evaluation and Characterization of Klima experiments) and the CMIP Historical Simulation (1850-near-present) that will maintain continuity and help document basic characteristics of models across different phases of CMIP, (2) common standards, coordination, infrastructure and documentation that will facilitate the distribution of model outputs and the characterization of the model ensemble, and (3) an ensemble of CMIP-Endorsed Model Intercomparison Projects (MIPs) that will be specific to a particular phase of CMIP (now CMIP6) and that will build on the DECK and the CMIP Historical Simulation to address a large range of specific questions and fill the scientific gaps of the previous CMIP phases. The DECK and CMIP Historical Simulation, together with the use of CMIP data standards, will be the entry cards for models participating in CMIP. The participation in the CMIP6-Endorsed MIPs will be at the discretion of the modelling groups, and will depend on scientific interests and priorities. With the Grand Science Challenges of the World Climate Research Programme (WCRP) as its scientific backdrop, CMIP6 will address three broad questions: (i) how does the Earth system respond to forcing?, (ii) what are the origins and consequences of systematic model biases?, and (iii) how can we assess future climate changes given climate variability, predictability and uncertainties in scenarios? This CMIP6 overview paper presents the background and rationale for the new structure of CMIP, provides a detailed description of the DECK and the CMIP6 Historical Simulation, and includes a brief introduction to the 21 CMIP6-Endorsed MIPs. [ABSTRACT FROM AUTHOR]

Common ragweed (Ambrosia artemisiifolia L.) is a highly allergenic and invasive plant in Europe. Its pollen can be transported over large distances and has been recognized as a significant cause of hayfever and asthma (D'Amato et al., 2007; Burbach et al., 2009). To simulate production and dispersion of common ragweed pollen, we implement a pollen emission and transport module in the Regional Climate Model (RegCM) version 4 using the framework of the Community Land Model (CLM) version 4.5. In the online model environment where climate is integrated with dispersion and vegetation production, pollen emissions are calculated based on the modelling of plant distribution, pollen production, species-specific phenology, flowering probability, and flux response to meteorological conditions. A pollen tracer model is used to describe pollen advective transport, turbulent mixing, dry and wet deposition. The model is then applied and evaluated on a European domain for the period 2000-2010. To reduce the large uncertainties notably due to ragweed density distribution on pollen emission, a calibration based on airborne pollen observations is used. Resulting simulations show that the model captures the gross features of the pollen concentrations found in Europe, and reproduce reasonably both the spatial and temporal patterns of flowering season and associated pollen concentrations measured over Europe. The model can explain 68.6, 39.2, and 34.3 % of the observed variance in starting, central, and ending dates of the pollen season with associated root mean square error (RMSE) equal to 4.7, 3.9, and 7.0 days, respectively. The correlation between simulated and observed daily concentrations time series reaches 0.69. Statistical scores show that the model performs better over the central Europe source region where pollen loads are larger. From these simulations health risks associated common ragweed pollen spread are then evaluated through calculation of exposure time above health-relevant threshold levels. The total risk area with concentration above 5 grains m-3 takes up 29.5 % of domain. The longest exposure time occurs on Pannonian Plain, where the number of days per year with the daily concentration above 20 grains m-3 exceeds 30. [ABSTRACT FROM AUTHOR]

The Coupled Model Intercomparison Project (CMIP) is one of the biggest international efforts aimed at better understanding the past, present, and future of climate changes in a multi-model context. A total of 21 model intercomparison projects (MIPs) were endorsed in its sixth phase (CMIP6), which included 190 different experiments that were used to simulate 40 000 years and produced around 40 PB of data in total. This paper presents the main findings obtained from the CPMIP (the Computational Performance Model Intercomparison Project), a collection of a common set of metrics, specifically designed for assessing climate model performance. These metrics were exclusively collected from the production runs of experiments used in CMIP6 and primarily from institutions within the IS-ENES3 consortium. The document presents the full set of CPMIP metrics per institution and experiment, including a detailed analysis and discussion of each of the measurements. During the analysis, we found a positive correlation between the core hours needed, the complexity of the models, and the resolution used. Likewise, we show that between 5 %–15 % of the execution cost is spent in the coupling between independent components, and it only gets worse by increasing the number of resources. From the data, it is clear that queue times have a great impact on the actual speed achieved and have a huge variability across different institutions, ranging from none to up to 78 % execution overhead. Furthermore, our evaluation shows that the estimated carbon footprint of running such big simulations within the IS-ENES3 consortium is 1692 t of CO 2 equivalent. As a result of the collection, we contribute to the creation of a comprehensive database for future community reference, establishing a benchmark for evaluation and facilitating the multi-model, multi-platform comparisons crucial for understanding climate modelling performance. Given the diverse range of applications, configurations, and hardware utilised, further work is required for the standardisation and formulation of general rules. The paper concludes with recommendations for future exercises aimed at addressing the encountered challenges which will facilitate more collections of a similar nature. [ABSTRACT FROM AUTHOR]

This paper presents the methodology for the construction of the KNMI'23 national climate scenarios for the Netherlands. We have developed six scenarios, that cover a substantial part of the uncertainty in CMIP6 projections of future climate change in the region. Different sources of uncertainty are disentangled as much as possible, partly by means of a storyline approach. Uncertainty in future emissions is covered by making scenarios conditional on different SSP scenarios (SSP1‐2.6, SSP2‐4.5, and SSP5‐8.5). For each SSP scenario and time horizon (2050, 2100, 2150), we determine a global warming level based on the median of the constrained estimates of climate sensitivity from IPCC AR6. The remaining climate model uncertainty of the regional climate response at these warming levels is covered by two storylines, which are designed with a focus on the annual and seasonal mean precipitation response (a dry‐trending and wet‐trending variant for each SSP). This choice was motivated by the importance of future water management to society. For users with specific interests we provide means how to account for the impact of the uncertainty in climate sensitivity. Since CMIP6 GCM data do not provide the required spatial detail for impact modeling, we reconstruct the CMIP6 responses by resampling internal variability in a GCM‐RCM initial‐condition ensemble. The resulting climate scenarios form a detailed storyline of plausible future climates in the Netherlands. The data can be used for impact calculations and assessments by stakeholders, and will be used to inform policy making in different sectors of Dutch society. Plain Language Summary: To prepare society for the effects of future climate change, we need to know what the future climate will be like. In this paper we explain the method that is used to construct six different scenarios that describe possible future climates of the Netherlands. The scenarios make assumptions about future greenhouse gas emissions, and are based on the outcomes of climate models that simulate the response of the climate to these emissions. The KNMI'23 climate scenarios show that strongly reducing global emissions strongly reduces the expected changes in the climate of the Netherlands. In the scenario in which global emissions continue to rise until 2080, Dutch society will have to adapt to a much stronger increases in heat and precipitation extremes, increased risks of droughts with low river discharge in summer, and increased risk of flooding due to high river discharges in winter. In the coming years the climate scenario data will be used to evaluate what needs to be done to keep the country a safe place for people to live in and to thrive in, under changing climate conditions. Key Points: We present a methodology for the construction of regional climate scenarios using a storyline approach to partition uncertaintyResults from CMIP6 are reconstructed with a GCM‐RCM initial condition ensemble to produce high‐resolution scenario data for end‐usersSix scenario variants cover emission uncertainty (high, moderate, low) and uncertainty in the regional response (dry‐trending, wet‐trending) [ABSTRACT FROM AUTHOR]

This paper describes an integrated assessment modelling framework for uncertainty studies in global and regional climate change. In this framework, the Massachusetts Institute of Technology (MIT) Integrated Global System Model (IGSM), an integrated assessment model that couples an earth system model of intermediate complexity to a human activity model, is linked to the National Center for Atmospheric Research (NCAR) Community Atmosphere Model (CAM). Since the MIT IGSM-CAM framework (version 1.0) incorporates a human activity model, it is possible to analyse uncertainties in emissions resulting from both uncertainties in the economic model parameters and uncertainty in future climate policies. Another major feature is the flexibility to vary key climate parameters controlling the climate system response: climate sensitivity, net aerosol forcing and ocean heat uptake rate. Thus, the IGSM-CAM is a computationally efficient framework to explore the uncertainty in future global and regional climate change associated with uncertainty in the climate response and projected emissions. This study presents 21st century simulations based on two emissions scenarios (unconstrained scenario and stabilization scenario at 660 ppm CO2-equivalent) and three sets of climate parameters. The chosen climate parameters provide a good approximation for the median, and the 5th and 95th percentiles of the probability distribution of 21st century global climate change. As such, this study presents new estimates of the 90% probability interval of regional climate change for different emissions scenarios. These results underscore the large uncertainty in regional climate change resulting from uncertainty in climate parameters and emissions, especially when it comes to changes in precipitation. [ABSTRACT FROM AUTHOR]

The article presents a study that demonstrates the capabilities of Parallel Offline Radiative Transfer (PORT) model in diagnosing radiative forcing. It states that the model separates the radiation code from the Community Atmosphere Model (CAM4) in the Community Earth System Model (CESM1). It also notes that the model can effectively provide accurate computation of radiative forcing from doubling of carbon dioxide from the ozone concentration.

A crucial factor influencing the mass balance of the West Antarctic Ice Sheet is the Amundsen Sea Low (ASL), a climatological low‐pressure region situated off the West Antarctic coast. However, albeit the deepening of the ASL since the 1950s has been attributed to anthropogenic forcing, the multi‐decadal variability of the ASL remains poorly understood, because of a lack of long observations. Here, we apply a newly developed data assimilation method to reconstruct the ASL over 1870–2000. We study the forced and internal variability of the ASL using our new reconstruction in concert with existing large ensembles of climate model simulations. Our findings robustly demonstrate that an atmospheric teleconnection originating from the tropical Indo‐Pacific is the main driver of ASL variability at the multi‐decadal time scale, with resemblance to the Interdecadal Pacific Oscillation. Since the mid‐20th century, anthropogenic forcing has emerged as a dominant contributor to the strengthening of the ASL. Plain Language Summary: Changes in the West Antarctic Ice Sheet mass balance (i.e., the difference between the gain and loss of ice mass) are partly influenced by large‐scale winds, and in particular, a climatological low‐pressure feature located off the West Antarctic coast called the Amundsen Sea Low (ASL). Yet, although the long‐term strengthening of the ASL since the mid‐20th century has been demonstrated to be related to anthropogenic forcing, our understanding of the variability of the ASL on time‐scales of decades is poorly known. In this paper, we therefore investigate the origins of this variability since 1870, and quantify the relative contributions of human‐caused climate changes and natural variability of the climate system. For this purpose, we use several ensembles of model simulations as well as new climate reconstructions that combine paleoclimate records with model simulations using a statistical method. Our results indicate that the multi‐decadal variability of the ASL is strongly driven by tropical variability in the Indo‐Pacific through atmospheric connections between this region and the Amundsen Sea. Our reconstruction, when compared with a large ensemble of model simulations, indicates that since 1950, human‐induced climate forcing has become a dominant driver of long‐term ASL variability, contributing equally to tropical variability. Key Points: The large‐scale atmospheric circulation in West Antarctica exhibits a strong multi‐decadal variability superimposed by a 20th‐century trendThe multi‐decadal variability of this large‐scale atmospheric circulation is strongly governed by the Indo‐Pacific tropical variabilitySince 1950, anthropogenic forcing has emerged as a key driver of the long‐term change of this atmospheric circulation [ABSTRACT FROM AUTHOR]

The article presents a research on the long-term response of the climate to high levels of atmospheric greenhouse gases using the low resolution version of the Norwegian Earth System Model (NorESM-L) to simulate pre-industrial and mid-Pliocene climate. The research indicates that NorESM-L simulates realistic pre-industrial climate. Moreover, it demonstrates the uniformity of the global warming worldwide, except for a strong amplification at high latitudes.

Research on climate anxiety is rapidly growing, with ongoing exploration of population prevalence, contributing factors, and mitigation strategies that transform anxiety into helpful action. What remains unclear is whether and how to delineate climate anxiety from mental ill health. A limited conceptualization of climate anxiety restricts efforts to identify and support those adversely affected. This paper draws on psychological and existential theories to propose a theoretical model of climate anxiety and coping, extending previous conceptualizations. The model theorizes that climate change evokes an existential conflict that manifests affectively as climate anxiety (and other emotional experiences), wherein cognitive and behavioral coping processes are activated. These processes fall on a continuum of adaptivity, depending on functional impact. Responses might range from meaningful engagement with activities that address climate change to maladaptive strategies that negatively impact personal, social, and occupational functioning. Applications of this model in research and practice are proposed. [ABSTRACT FROM AUTHOR]

Global flood mapping has developed rapidly over the past decade, but previous approaches have limited scope, function, and accuracy. These limitations restrict the applicability and fundamental science questions that can be answered with existing model frameworks. Harnessing recently available data and modeling methods, this paper presents a new global ∼30 m resolution Global Flood Map (GFM) with complete coverage of fluvial, pluvial, and coastal perils, for any return period or climate scenario, including accounting for uncertainty. With an extensive compilation of global benchmark case studies—ranging from locally collected event water levels, to national inventories of engineering flood maps—we execute a comprehensive validation of the new GFM. For flood extent comparisons, we demonstrate that the GFM achieves a critical success index of ∼0.75. In the more discriminatory tests of flood water levels, the GFM deviates from observations by ∼0.6 m on average. Results indicating this level of global model fidelity are unprecedented in the literature. With an optimistic scenario of future warming (SSP1‐2.6), we show end‐of‐century global flood hazard (average annual inundation volume) increases are limited to 9% (likely range ‐6%–29%); this is within the likely climatological uncertainty of −8%–12% in the current hazard estimate. In contrast, pessimistic scenario (SSP5‐8.5) hazard changes emerge from the background noise in the 2040s, rising to a 49% (likely range of 7%–109%) increase by 2100. This work verifies the fitness‐for‐purpose of this new‐generation GFM for impact analyses with a variety of beneficial applications across policymaking, planning, and commercial risk assessment. Plain Language Summary: Computer models use a variety of data and physical equations to estimate the extent and depth of possible flood events. Global applications of these tools have been developed over the past decade, but they are not very good at simulating the behavior of real floods. In this paper, we address some key problems to make a global model that does a lot better than past ones. We apply new techniques to better understand how much water we need to put into the model for a given flood probability. This movement of water is simulated by the model over a more accurate map of the Earth's terrain than has been available previously, with river channels represented in a smarter way. We look at the projected changes in rainfall, river discharge, and sea levels for given levels of warming simulated by available climate models and adjust the probabilities of a given magnitude flood accordingly. The model results suggest that the effect of future climate change might be small relative to our ability to understand flood hazards today, but this depends heavily on how much carbon we emit in the coming decades. Key Points: New climate‐conditioned model framework represents fluvial, pluvial, and coastal flood hazards at high‐resolution globallyComprehensive validation studies suggest that the model is approaching local model skill in many casesEmissions reduction can hold flood hazards largely constant this century, though coastal flooding will increase drastically regardless [ABSTRACT FROM AUTHOR]

This study examines N2O emission estimates from 5 different atmospheric inversion frameworks. The 5 frameworks differ in the choice of atmospheric transport model, meteorological data, prior uncertainties and inversion method but use the same prior emissions and observation dataset. The mean emissions for 2006 to 2008 are compared in terms of the spatial distribution and seasonality. Overall, there is a good agreement among the inversions for the mean global total emission, which ranges from 16.1 to 18.7 Tg N yr-1 and is consistent with previous estimates. Ocean emissions represent between 31% and 38% of the global total compared to widely varying previous estimates of 24% to 38%. Emissions from the northern mid to high latitudes are likely to be more important, with a consistent shift in emissions from the tropics and subtropics to the mid to high latitudes in the Northern Hemisphere; the emission ratio for 0-30° N to 30-90° N ranges from 1.5 to 1.9 compared with 2.9 to 3.0 in previous estimates. The largest discrepancies across inversions are seen for the regions of South and East Asia and for tropical and South America owing to the poor observational constraint for these areas and to considerable differences in the modelled transport, especially inter-hemispheric exchange rates and tropical convection. Estimates of the seasonal cycle in N2O emissions are also sensitive to errors in modelled stratosphere-to-troposphere transport in the tropics and southern extra-tropics. Overall, the results show a convergence in the global and regional emissions compared to previous independent studies. [ABSTRACT FROM AUTHOR]

The responses of crop functioning to changing climate and atmospheric CO2 concentration ([CO2]) could have large effects on food production, and impact carbon, water and energy fluxes, causing feedbacks to climate. To simulate the responses of temperate crops to changing climate and [CO2], accounting for the specific phenology of crops mediated by management practice, we present here the development of a process-oriented terrestrial biogeochemical model named ORCHIDEE-CROP (v0), which integrates a generic crop phenology and harvest module and a very simple parameterization of nitrogen fertilization, into the land surface model (LSM) ORCHIDEEv196, in order to simulate biophysical and biochemical interactions in croplands, as well as plant productivity and harvested yield. The model is applicable for a range of temperate crops, but it is tested here for maize and winter wheat, with the phenological parameterizations of two European varieties originating from the STICS agronomical model. We evaluate the ORCHIDEE-CROP (v0) model against eddy covariance and biometric measurements at 7 winter wheat and maize sites in Europe. The specific ecosystem variables used in the evaluation are CO2 fluxes (NEE), latent heat and sensible heat fluxes. Additional measurements of leaf area index (LAI), aboveground biomass and yield are used as well. Evaluation results reveal that ORCHIDEE-CROP (v0) reproduces the observed timing of crop development stages and the amplitude of pertaining LAI changes in contrast to ORCHIDEEv196 in which by default crops have the same phenology than grass. A near-halving of the root mean square error of LAI from 2.38 ± 0.77 to 1.08 ± 0.34 m² m-2 is obtained between ORCHIDEEv196 and ORCHIDEE-CROP (v0) across the 7 study sites. Improved crop phenology and carbon allocation lead to a general good match between modelled and observed aboveground biomass (with a normalized root mean squared error (NRMSE) of 11.0-54.2%), crop yield, as well as of the daily carbon and energy fluxes with NRMSE of ~9.0-20.1 and ~9.4-22.3 % for NEE, and sensible and latent heat fluxes, respectively. The model data mistfit for energy fluxes are within uncertainties of the measurements, which themselves show an incomplete energy balance closure within the range 80.6-86.3 %. The remaining discrepancies between modelled and observed LAI and other variables at specific sites are partly attributable to unrealistic representation of management events. In addition, ORCHIDEE-CROP (v0) is shown to have the ability to capture the spatial gradients of carbon and energy-related variables, such as gross primary productivity, NEE, sensible heat fluxes and latent heat fluxes, across the sites in Europe, an important requirement for future spatially explicit simulations. Further improvement of the model with an explicit parameterization of nutrition dynamics and of management, is expected to improve its predictive ability to simulate croplands in an Earth System Model. [ABSTRACT FROM AUTHOR]

We present the new GOME-type Total Ozone Essential Climate Variable (GTO-ECV) data record which has been created within the framework of the European Space Agency's Climate Change Initiative (ESA-CCI). Total ozone column observations - based on the GOME-type Direct Fitting version 3 algorithm - from GOME (Global Ozone Monitoring Experiment), SCIAMACHY (SCanning Imaging Absorption SpectroMeter for Atmospheric CHartographY), and GOME-2 have been combined into one homogeneous time series, thereby taking advantage of the high inter-sensor consistency. The data record spans the 15-year period from March 1996 to June 2011 and it contains global monthly mean total ozone columns on a 1° × 1° grid. Geophysical ground-based validation using Brewer, Dobson, and UV-visible instruments has shown that the GTO-ECV level 3 data record is of the same high quality as the equivalent individual level 2 data products that constitute it. Both absolute agreement and long-term stability are excellent with respect to the ground-based data, for almost all latitudes apart from a few outliers which are mostly due to sampling differences between the level 2 and level 3 data. We conclude that the GTO-ECV data record is valuable for a variety of climate applications such as the long-term monitoring of the past evolution of the ozone layer, trend analysis and the evaluation of Chemistry-Climate Model simulations. [ABSTRACT FROM AUTHOR]

Scenarios are central to fisheries and aquatic conservation research on climate change. Scenarios project future greenhouse-gas emissions, which climate models translate into warming projections. Recent climate research and global development trends have significantly changed our understanding of plausible emissions pathways to 2100 and climate sensitivities to emissions. Here, we review these developments and make recommendations for scenario use in fisheries and aquatic conservation research. Although emissions pathways are uncertain, recent research suggests that scenarios producing ∼3.4–4.5 W/m2 radiative forcing by 2100 (e.g. scenarios SSP2-3.4 and SSP2-4.5/RCP4.5) might be most plausible. This corresponds to ∼2–3 degrees C global warming by 2100 with median climate sensitivities, or 1.5–4 degrees C considering climate-system uncertainties. Higher- and lower-emissions scenarios (e.g. RCP2.6 and RCP6.0) might be plausible and should be explored in research. However, high-emission scenarios (RCP8.5/SSP5-8.5, SSP3-7.0) seem implausible and should be used with clear rationales and caveats to ensure results are not misinterpreted by scholars, policymakers, and media. We analyse fisheries and aquatic conservation papers published from 2015 to 2022 in major journals, and find that RCP8.5/SSP5-8.5 are the most commonly used scenarios, though RCP4.5/SSP2-4.5 use has increased since 2020. Studies predominantly project quantitative rather than qualitative differences between these scenarios' impacts. [ABSTRACT FROM AUTHOR]

A Climate Pattern-Scaling Model (CPSM) that simulates global patterns of climate change, for a prescribed emissions scenario, is described. A CPSM works by quantitatively establishing the statistical relationship between a climate variable at a specific location (e.g. daily maximum surface temperature, Tmax) and one or more predictor time series (e.g. global mean surface temperature, Tglobal) - referred to as the "training" of the CPSM. This training uses a regression model to derive fit-coefficients that describe the statistical relationship between the predictor time series and the target climate variable time series. Once that relationship has been determined, and given the predictor time series for any greenhouse gas (GHG) emissions scenario, the change in the climate variable of interest can be reconstructed - referred to as the "application" of the CPSM. The advantage of using a CPSM rather than a typical atmosphere-ocean global climate model (AOGCM) is that the predictor time series required by the CPSM can usually be generated quickly using a simple climate model (SCM) for any prescribed GHG emissions scenario and then applied to generate global fields of the climate variable of interest. The training can be performed either on historical measurements or on output from an AOGCM. Using model output from 21st century simulations has the advantage that the climate change signal is more pronounced than in historical data and therefore a more robust statistical relationship is obtained. The disadvantage of us20 ing AOGCM output is that the CPSM training might be compromised by any AOGCM inadequacies. For the purposes of exploring the various methodological aspects of the CPSM approach, AOGCM output was used in this study to train the CPSM. These investigations of the CPSM methodology focus on monthly mean fields of daily temperature extremes (Tmax and Tmin). Key conclusions are: (1) overall, the CPSM trained on simulations based on the Representative Concentration Pathway (RCP) 8.5 emissions scenario is able to reproduce AOGCM simulations of Tmax and Tmin based on predictor time series from an RCP 4.5 emissions scenario; (2) access to hemisphere average land and ocean temperatures as predictors improves the variance that can be explained, particularly over the oceans; (3) regression model fit-coefficients derived from individual simulations based on the RCP 2.6, 4.5 and 8.5 emissions scenarios agree well over most regions of the globe (the Arctic is the exception); (4) training the CPSM on concatenated time series from an ensemble of simulations does not result in fit-coefficients that explain significantly more of the variance than an approach that weights results based on single simulation fits; and (5) the inclusion of a linear time dependence in the regression model fit-coefficients improves the variance explained, primarily over the oceans. [ABSTRACT FROM AUTHOR]

The article presents a study that demonstrates the applications of the Biogeochemical Transport and Reactions (CLM4-BeTR) in regional and global biogeochemistry modeling and climate predictability. It outlines the functions of the model in which its transport code are evaluated through several analytical test cases. The study shows that the method provides detailed comparison between ecosystem observation and predictions.

The article presents a study that investigates the effectiveness of Earth System Model (ESM) in determining carbon-cycle climate feedback and the future climate. It describes the method of the study that analyzes the paleoclimate experiments proposed by the Coupled Model Intercomparison Project. It notes the result of the study, which shows that the complexity of the model requires various steps to correctly configure the experiments.

The article presents a study which detected atmosphere vegetation interaction's hotspot via slowing down using early warning signals (EWS). It states that EWS can be used as a diagnostic tool to find hotspot and distinguish from regions that experience induced tipping. It says that using a stochastic model, EWS, at individual components of a coupled system, has been demonstrated as non-generic precursors of sudden transition at tipping point.

A large shortcoming of current chemistry transport models for simulating the fate of ammonia in the atmosphere is the lack of a description of the bi-directional surfaceatmosphere exchange. In this paper, results of an update of the dry deposition module DEPAC in the LOTOS-EUROS model are discussed. It is shown that with the new description, which includes bi-directional surface-atmosphere exchange, the modeled ammonia concentrations increase almost everywhere, in particular in agricultural source areas. The reason is that by using a compensation point the ammonia life time and transport distance is increased. As a consequence, deposition of ammonia and ammonium decreases in agricultural source areas, while it increases in large nature areas and remote regions especially in Southern Scandinavia. The inclusion of a compensation point for water reduces the dry deposition over sea and allows reproducing the observed marine background concentrations at coastal locations to a better extend. A comparison with measurements shows that the model results better represent the measured ammonia concentrations. The concentrations in nature areas are slightly overestimated, while the concentrations in agricultural source areas are still underestimated. Although the introduction of the compensation point improves the model performance, the modeling of ammonia remains challenging. Important aspects are emission patterns in space and time as well as a proper approach to deal with the high concentration gradients in relation to model resolution. In short, the inclusion of a bi-directional surface atmosphere exchange is a significant step forward for modeling ammonia. [ABSTRACT FROM AUTHOR]

The article presents an analysis of the result and set-ups of experiments proposed in Pliocene Model Intercomparison Project (PiloMIP) through the utilization of a global climate model, MRI-CGCM2.3. Coupled atmosphere-ocean general circulation model (AOGCM) and its atmospheric component (AGCM) is applied in the experiments. A comparison of the major characteristics of the differences in the simulated mid-Pliocene climate relative to the pre-industrial integrations is discussed.

The terrestrial biosphere is currently a strong sink for anthropogenic CO2 emissions. Through the radiative properties of CO2 the strength of this sink has a direct influence on the radiative budget of the global climate system. The accurate assessment of this sink and its evolution under a changing climate is, hence, paramount for any efficient management strategies of the terrestrial carbon sink to avoid dangerous climate change. Unfortunately, simulations of carbon and water fluxes with terrestrial biosphere models exhibit large uncertainties. A considerable fraction of this uncertainty is reflecting uncertainty in the parameter values of the process formulations within the models. This paper describes the systematic calibration of the process parameters of a terrestrial biosphere model against two observational data streams: remotely sensed FAPAR provided by the MERIS sensor and in situ measurements of atmospheric CO2 provided by the GLOBALVIEW flask sampling network. We use the Carbon Cycle Data Assimilation System (CCDAS) to systematically calibrate some 70 parameters of the terrestrial biosphere model BETHY. The simultaneous assimilation of all observations provides parameter estimates and uncertainty ranges that are consistent with the observational information. In a subsequent step these parameter uncertainties are propagated through the model to uncertainty ranges for predicted carbon fluxes. We demonstrate the consistent assimilation for two different set-ups: first at site scale, where MERIS FAPAR observations at a range of sites are used as simultaneous constraints, and second at global scale, where the global MERIS FAPAR product and atmospheric CO2 are used simultaneously. On both scales the assimilation improves the match to independent observations. We quantify how MERIS data improve the accuracy of the current and future (net and gross) carbon flux estimates (within and beyond the assimilation period). We further demonstrate the use of an interactive mission benefit analysis tool built around CCDAS to support the design of future space missions. We find that, for long-term averages, the benefit of FAPAR data is most pronounced for hydrological quantities, and moderate for quantities related to carbon fluxes from ecosystems. The benefit for hydrological quantities is highest for semi-arid tropical or sub-tropical regions. Length of mission or sensor resolution is of minor importance. [ABSTRACT FROM AUTHOR]

One of the relevant processes driven by political discussion under the United Framework Convention on Climate Change is the monitoring of Essential Climate Variables. Land Cover is one of those variables and efforts are therefore to be made to develop land cover observation approaches which meet the climate modelling community expectations. This paper aims at contributing to this necessity. First, consultation mechanisms were established with the climate modelling community to identify its specific requirements in terms of satellite-based global land cover products. This assessment highlighted specific needs in terms of land cover characterization and products accuracy, stability and consistency that are currently not met. Based on this outcome, the paper calls into question the current land cover representation and for revisiting global land cover mapping approaches. Increasing the flexibility of current classification systems and making the mapping techniques less sensitive to the period of observation are proposed as two key aspects to enhance the usability of global land cover dataset. [ABSTRACT FROM AUTHOR]

This paper develops a method for determining whether two vector time series originate from a common stochastic process. The stochastic process considered incorporates both serial correlations and multivariate annual cycles. Specifically, the process is modeled as a vector autoregressive model with periodic forcing, referred to as a VARX model (where X stands for exogenous variables). The hypothesis that two VARX models share the same parameters is tested using the likelihood ratio method. The resulting test can be further decomposed into a series of tests to assess whether disparities in the VARX models stem from differences in noise parameters, autoregressive parameters, or annual cycle parameters. A comprehensive procedure for compressing discrepancies between VARX models into a minimal number of components is developed based on discriminant analysis. Using this method, the realism of climate model simulations of monthly mean North Atlantic sea surface temperatures is assessed. As expected, different simulations from the same climate model cannot be distinguished stochastically. Similarly, observations from different periods cannot be distinguished. However, every climate model differs stochastically from observations. Furthermore, each climate model differs stochastically from every other model, except when they originate from the same center. In essence, each climate model possesses a distinct fingerprint that sets it apart stochastically from both observations and models developed by other research centers. The primary factor contributing to these differences is the difference in annual cycles. The difference in annual cycles is often dominated by a single component, which can be extracted and illustrated using discriminant analysis. [ABSTRACT FROM AUTHOR]

Accurate assessment of anthropogenic carbon dioxide (CO2) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere is important to better understand the global carbon cycle, support the development of climate policies, and project future climate change. Here we describe datasets and a methodology to quantify all major components of the global carbon budget, including their uncertainties, based on the combination of a range of data, algorithms, statistics and model estimates and their interpretation by a broad scientific community We discuss changes compared to previous estimates, consistency within and among components, alongside methodology and data limitations. CO2 emissions from fossil fuel combustion and cement production (EFF) are based on energy statistics and cement production data, respectively, while emissions from Land-Use Change (ELUC), mainly deforestation, are based on combined evidence from land-cover change data, fire activity associated with deforestation, and models. The global atmospheric CO2 concentration is measured directly and its rate of growth (GATM) is computed from the annual changes in concentration. The mean ocean CO2 sink (SOCEAN) is based on observations from the 1990s, while the annual anomalies and trends are estimated with ocean models. The variability in SOCEAN is evaluated with data products based on surveys of ocean CO2 measurements. The global residual terrestrial CO2 sink (SLAND) is estimated by the difference of the other terms of the global carbon budget and compared to results of independent Dynamic Global Vegetation Models forced by observed climate, CO2 and land cover change (some including nitrogen-carbon interactions). We compare the variability and mean land and ocean fluxes to estimates from three atmospheric inverse methods for three broad latitude bands. All uncertainties are reported as ±1σ, reflecting the current capacity to characterise the annual estimates of each component of the global carbon budget. For the last decade available (2004-2013), EFF was 8.9±0.4GtCyr-1, ELUC 0.9±0.5GtCyr-1, GATM 4.3±0.1 GtCyr-1, SOCEAN 2.6±0.5GtCyr-1, and SLAND 2.9±0.8GtCyr-1. For year 2013 alone, EFF grew to 9.9 ± 0.5 GtCyr-1, 2.3% above 2012, contining the growth trend in these emissions. ELUC was 0.9 ± 0.5 GtCyr-1, GATM was 5.4 ± 0.2 GtCyr-1, SOCEAN was 2.9± 0.5 GtCyr-1 and SLAND was 2.5 ± 0.9 GtCyr-1. GATM was high in 2013 reflecting a steady increase in EFF and smaller and opposite changes between SOCEAN and SLAND compared to the past decade (2004-2013). The global atmospheric CO2 concentration reached 395.31 ± 0.10 ppm averaged over 2013. We estimate that EFF will increase by 2.5 % (1.3-3.5 %) to 10.1 ±0.6 GtC in 2014 (37.0± 2.2 GtCO2 yr-1), 65% above emissions in 1990, based on projections of World Gross Domestic Product and recent changes in the carbon intensity of the economy. From this projection of EFF and assumed constant ELUC for 2014, cumulative emissions of CO2 will reach about 545 ± 55GtC (2000 ± 200 GtCO2) for 1870-2014, about 75% from EFF and 25% from ELUC. This paper documents changes in the methods and datasets used in this new carbon budget compared with previous publications of this living dataset (Le Quéré et al., 2013, 2014). All observations presented here can be downloaded from the Carbon Dioxide Information Analysis Center. [ABSTRACT FROM AUTHOR]

We evaluate the isotopic composition of water vapor and precipitation simulated by the LMDZ GCM over Siberia using several datasets: TES and GOSAT satellite observations of tropospheric water vapor, GNIP and SNIP precipitation networks, and daily, in-situ measurements of water vapor and precipitation at the Kourovka site in Western Siberia. We use dD vs. humidity diagrams to explore the complementarity of these two variables to interpret model biases in terms of the representation of processes. LMDZ captures the spatial, seasonal and daily variations reasonably well. It systematically overestimates dD in the vapor and precipitation, a bias that is most likely associated with a misrepresentation of air mass origin. The performance of LMDZ is put in the context of other isotopic models from the SWING2 models. There is significant spread among models in the simulation of dD, and of the dD vs. humidity relationship. This confirms that dD brings additional information compared to humidity only. We specifically investigate the added value of water isotopic measurements to interpret the warm and dry bias feature by most GCMs over mid and high latitude continents in summer. LMDZ simulates the strongest dry bias on days when it simulates the strongest enriched bias in dD. The analysis of the slopes in dD vs. humidity diagrams and of processes controlling dD and humidity variations suggests that the cause of the moist bias could be either a problem in the large-scale advection transporting too much dry and warm air from the south, or insufficient surface evaporation. [ABSTRACT FROM AUTHOR]

The predictions of two road dust suspension emission models were compared with the on-site mobile measurements of suspension emission factors. Such a quantitative comparison has not previously been reported in the reviewed literature. The models used were the Nordic collaboration model NORTRIP (NOn-exhaust Road TRaffic Induced Particle emissions) and the Swedish-Finnish FORE model (Forecasting Of Road dust Emissions). These models describe particulate matter generated by the wear of road surface due to traction control methods and processes that control the suspension of road dust particles into the air. An experimental measurement campaign was conducted using a mobile laboratory called SNIFFER, along two selected road segments in central Helsinki in 2007 and 2008. The suspended PM10 concentration was measured behind the left rear tyre and the street background PM10 concentration in front of the van. Both models reproduced the measured seasonal variation of suspension emission factors fairly well during both years at both measurement sites. However, both models substantially under-predicted the measured emission values. The results indicate that road dust emission models can be directly compared with mobile measurements; however, more extensive and versatile measurement campaigns will be needed in the future. [ABSTRACT FROM AUTHOR]

The target of this work was to assess the impact of projected climate change on the number of large forest fires (over 10 ha fires) and burned area in Finland. For this purpose, we utilized a strong relationship between fire occurrence and the Canadian fire weather index (FWI) during 1996-2014. We used daily data from five global climate models under representative concentration pathway RCP4.5 and RCP8.5 scenarios. The model data were statistically downscaled onto a high-resolution grid using the quantile-mapping method before performing the analysis. Our results suggest that the number of large forest fires may double or even triple during the present century. This would increase the risk that some of the fires could develop into real conflagrations which have become almost extinct in Finland due to active and efficient fire suppression. Our results also reveal substantial inter-model variability in the rate of the projected increase in forest-fire danger. We moreover showed that the majority of large fires occur within a relatively short period in May and June due to human activities and that FWI correlates poorer with the fire activity during this time of year than later in summer when lightning is more important cause of fires. [ABSTRACT FROM AUTHOR]

The Canadian Terrestrial Ecosystem Model (CTEM) is the interactive vegetation component in the Earth system model of the Canadian Centre for Climate Modelling and Analysis. CTEM models land-atmosphere exchange of CO2 through the response of carbon in living vegetation, and dead litter and soil pools, to changes in weather and climate at timescales of days to centuries. Version 1.0 of CTEM uses prescribed fractional coverage of plant functional types (PFTs) although, in reality, vegetation cover continually adapts to changes in climate, atmospheric composition, and anthropogenic forcing. Changes in the spatial distribution of vegetation occur on timescales of years to centuries as vegetation distributions inherently have inertia. Here, we present version 2.0 of CTEM which includes a representation of competition between PFTs based on a modified version of the Lotka-Volterra (L-V) predator-prey equations. Our approach is used to dynamically simulate the fractional coverage of CTEM's seven natural, non-crop PFTs which are then compared with available observation-based estimates. Results from CTEM v. 2.0 show the model is able to represent the broad spatial distributions of its seven PFTs at the global scale. However, differences remain between modelled and observation-based fractional coverages of PFTs since representing the multitude of plant species globally, with just seven non-crop PFTs, only captures the large scale climatic controls on PFT distributions. As expected, PFTs that exist in climate niches are difficult to represent either due to the coarse spatial resolution of the model, and the corresponding driving climate, or the limited number of PFTs used. We also simulate the fractional coverages of PFTs using unmodified L-V equations to illustrate its limitations. The geographic and zonal distributions of primary terrestrial carbon pools and fluxes from the versions of CTEM that use prescribed and dynamically simulated fractional coverage of PFTs compare reasonably well with each other and observation-based estimates. The parametrization of competition between PFTs in CTEM v. 2.0 based on the modified L-V equations behaves in a reasonably realistic manner and yields a tool with which to investigate the changes in spatial distribution of vegetation in response to future changes in climate. [ABSTRACT FROM AUTHOR]

This paper presents a method to analyze and improve the set of equations constituting a rainfall‐runoff model structure based on a combination of a data assimilation algorithm and polynomial updates to the state equations. The method, which we have called "Data Assimilation Informed model Structure Improvement" (DAISI) is generic, modular, and demonstrated with an application to the GR2M model and 201 catchments in South‐East Australia. Our results show that the updated model generated with DAISI generally performed better for all metrics considered included Kling‐Gupta Efficiency, NSE on log transform flow and flow duration curve bias. In addition, the elasticity of modeled runoff to rainfall is higher in the updated model, which suggests that the structural changes could have a significant impact on climate change simulations. Finally, the DAISI diagnostic identified a reduced number of update configurations in the GR2M structure with distinct regional patterns in three sub‐regions of the modeling domain (Western Victoria, central region, and Northern New South Wales). These configurations correspond to specific polynomials of the state variables that could be used to improve equations in a revised model. Several potential improvements of DAISI are proposed including the use of additional observed variables such as actual evapotranspiration to better constrain internal model fluxes. Plain Language Summary: This paper presents a data‐driven method to improve rainfall‐runoff models used to generate future water resources scenario in climate change studies. The method, which we have called "Data Assimilation Informed model Structure Improvement" (DAISI) is generic, modular, and demonstrated with an application to monthly streamflow simulations over a large data set of catchments in South‐East Australia. Our results show that DAISI improves model performance for a wide range of metrics and increases the sensitivity of the model to climate inputs, which is critical in climate change scenarios. Finally, the improvements identified by DAISI take a simple mathematical form with distinct regional patterns in three sub‐regions of the study domain (Western Victoria, central region, and Northern New South Wales). Several improvements of DAISI are discussed including the inclusion of additional observed variables such as evapotranspiration to better constrain model simulations. Key Points: Data Assimilation Informed model Structure Improvement method diagnoses hydrological model structures by combining data assimilation with a polynomial update of state equationsThe method was applied to the GR2M rainfall‐runoff model with significantly improved streamflow simulations in 201 Australian catchmentsThe method identified updates to state equations with marked regional characteristics that could guide future improvement of GR2M [ABSTRACT FROM AUTHOR]

The cloud feedback may result in amplification or damping of Arctic warming. Two common techniques used to diagnose the top‐of‐the‐atmosphere cloud feedback are the Adjusted Cloud Radiative Effect (AdjCRE) method and the Cloud Radiative Kernel (CRK) method. We apply both to CMIP5 and CMIP6 model data, finding that the AdjCRE calculated Arctic shortwave cloud feedback is twice as correlated with sea ice loss in CMIP5, and four times in CMIP6, as the CRK method. We find that the CRK method produces Arctic all‐sky residual percentages exceeding 20% in 15 of 18 models. We use the CRK method to decompose the feedback in CMIP5 and CMIP6 finding that its median value changed from negative to positive driven by a less‐negative cloud optical depth feedback. Despite its lack of closure, we conclude that the CRK method is better suited for Arctic SW feedbacks as it is less impacted by surface albedo changes. Plain Language Summary: The cloud feedback is the process by which cloud property changes in a warming climate can either further enhance warming or damp it. The Arctic is warming faster than the rest of the globe, and one of the largest sources of uncertainty in its climate projections is the cloud feedback. There are two popular methods to calculate the cloud feedback: the Adjusted Cloud Radiative Effect technique, and the Cloud Radiative Kernel technique. In this paper we compare the two methods in a suite of climate models by considering the extent to which changes in Arctic sea ice impact the cloud feedbacks. From this analysis we conclude that the Cloud Radiative Kernel method is less affected by sea ice loss. We then apply the Cloud Radiative Kernel technique to data from the two most recent generations of global climate models to investigate how polar day Arctic cloud feedbacks have changed between these generations. We find that the median value of these Arctic feedbacks is slightly positive in the newest generation of models, a change from slightly negative in the previous generation that is largely fueled by a weakening of the feedback associated with changes in cloud optical depth. Key Points: The Cloud Radiative Kernel method is less sensitive to surface albedo changes than the Adjusted Cloud Radiative Effect techniqueThe Cloud Radiative Kernel method provides poor radiative closure in a suite of global climate modelsThe median shortwave Arctic cloud feedback in recent climate models is slightly positive due to a weakened cloud optical depth feedback [ABSTRACT FROM AUTHOR]

The article discusses a study conducted to update ECOCLIMAP-I in Europe. It is evident that ECOCLIMAP-I is a database designed to cater needs of meteorological community to examine natural and managed ecosystems in association with weather forecasting and climate change modelling. It discusses methods, datasets and characteristics of producing ECOCLIMAPII/Europe.

The article presents a study that demonstrates the usefulness of the Minnesota Earth System Model for Ocean biogeochemistry (MESMO 2). It describes the functions of the model in investigating the climate-carbon feedbacks that involve diatoms in terms of carbon export production. It also mentions the result of the study, which shows that the method provides calibrated goal in preserving reasonable interior ocean ventilation and biological production in land and ocean.

The article presents a study that demonstrates the usefulness of the Norwegian Climate Center's Earth System Model (NorESM1-M) in the coupled model intercomparison project phase 5 (CMIP5). It outlines the role of the model in providing complementary results to the evaluation of possible man made climate change. It also demonstrates the effectiveness of the model in accurately depicting the changes in the atmospheric water cycle in precipitation events.

The article discusses the quality assessment of the World Data Center for Climate (WDCC) and its application to the Climate Model Intercomparison Project No. 5 (CMIP5). It states that the data and data replica are distributed over several local data repositories and no longer stored centrally. It says that the integrated part of the data quality assessment of the WDCC was adapted to the requirements of a federated data infrastructure.

Phosphate distributions simulated by seven state-of-the-art biogeochemical ocean circulation models are evaluated against observations of global ocean nutrient distributions. The biogeochemical models exhibit different structural complexities, ranging from simple nutrient-restoring to multi-nutrient NPZD type models. We evaluate the simulations using the observed volume distribution of phosphate. The errors in these simulated volume class distributions are significantly larger when preformed phosphate (or regenerated phosphate) rather than total phosphate is considered. Our analysis reveals that models can achieve similarly good fits to observed total phosphate distributions for a very different partitioning into preformed and regenerated nutrient components. This has implications for the strength and potential climate sensitivity of the simulated biological carbon pump. We suggest complementing the use of total nutrient distributions for assessing model skill by an evaluation of the respective preformed and regenerated nutrient components. [ABSTRACT FROM AUTHOR]

The application of Numerical Prediction Models to mineral dust cycle is considered of prime importance for the investigation of aerosol and non-CO2 greenhouse gases contributions in climate variability and change. In this framework, a modelling system was developed in order to provide a regional characterization of Saharan dust intrusions over Mediterranean basin. The model chain is based on three different modules: the atmospheric model, the dust emission model and transport/deposition model. Numerical simulations for a selected case study, June 2006, were performed in order to evaluate the modelling system effectiveness. The comparison of the results obtained in such a case study shows a good agreement with those coming from GOCART model. Moreover a good correspondence was found in the comparison with in-situ measurements regarding some specific crustal markers in the PM10 fraction. [ABSTRACT FROM AUTHOR]

Time series of vegetation indices (VI) derived from satellite imagery provide a consistent monitoring system for terrestrial plant systems. They enable detection and quantification of gradual changes within the time frame covered, which are of crucial importance in global change studies, for example. However, VI time series typically contain a strong seasonal signal which complicates change detection. Commonly, trends are quantified using linear regression methods, while the effect of serial autocorrelation is remediated by temporal aggregation over bins having a fixed width. Aggregating the data in this way produces temporal units which are modifiable. Analogous to the well-known Modifiable Area Unit Problem (MAUP), the way in which these temporal units are defined may influence the fitted model parameters and therefore the amount of change detected. This paper illustrates the effect of this Modifiable Temporal Unit Problem (MTUP) on a synthetic data set and a real VI data set. Large variation in detected changes was found for aggregation over bins that mismatched full lengths of vegetative cycles, which demonstrates that aperiodicity in the data may influence model results. Using 26 yr of VI data and aggregation over full-length periods, deviations in VI gains of less than 1% were found for annual periods, while deviations (with respect to seasonally adjusted data) increased up to 24% for aggregation windows of 5 yr. This demonstrates that temporal aggregation needs to be carried out with care in order to avoid spurious model results. [ABSTRACT FROM AUTHOR]

The article presents a research study of the Galápagos Island and its effect on the El Nião-Southern Oscillation (ENSO). ENSO is considered as one of the climate oscillations on Earth. The researchers used an ocean general circulating model and a hybrid coupled model of the tropical Pacific Ocean to examine the effects of the Galápagos Island on ENSO. Results such as the shift lead by the island in the ENSO period from biennial to quasi-quadrinneal are presented. Also, further studies in relation to the subject are encouraged.

Including the impacts of climate change in decision making and planning processes is a challenge facing many regional governments including the New South Wales (NSW) and Australian Capital Territory (ACT) governments in Australia. NARCliM (NSW/ACT Regional Climate Modelling project) is a regional climate modelling project that aims to provide a comprehensive and consistent set of climate projections that can be used by all relevant government departments when considering climate change. To maximise end user engagement and ensure outputs are relevant to the planning process, a series of stakeholder workshops were run to define key aspects of the model experiment including spatial resolution, time slices, and output variables. As with all such experiments, practical considerations limit the number of ensembles members that can be simulated such that choices must be made concerning which Global Climate Models (GCMs) to downscale from, and which Regional Climate Models (RCMs) to downscale with. Here a methodology for making these choices is proposed that aims to sample the uncertainty in both GCMs and RCMs, as well as spanning the range of future climate projections present in the full GCM ensemble. The created ensemble provides a more robust view of future regional climate changes. [ABSTRACT FROM AUTHOR]

The article presents a newly composed dataset of climate change scenario to pacify requirements for global assessments of climate change impacts. It is evident that global mean temperature change has become the yardstick to gauze impact of unavoidable climate change and requirement of adaptation. It is informed that the dataset helps in analyzing impact of climate change and implement climate model.

The importance of particulate organic carbon and phosphorus (P) delivered from shelves on open ocean productivity, oxygen, and reactive P burial during glacial times has been assessed using a biogeochemical ocean model of the carbon (C), P and iron cycles. The model shows that in simulations of the Last Glacial Maximum (LGM) without any inputs of terrigenous material from shelves there is a moderate increase in productivity (+5 %) and mean deep water oxygen (+29 %) relative to the preindustrial simulation. However, when the input of terrigenous particulate organic C and P is considered as an additional forcing in the LGM simulation, ocean productivity increases by 46 %, mean deep water oxygen concentration decreases by 20 %, and the global rate of reactive P burial is 3 times over the preindustrial value. The associated pattern of negative oxygen anomalies at 1000m induces a deepening of the Atlantic and Indian Ocean oxygen minimum (OMZ), while in the Pacific Ocean the OMZ is shifted to the eastern basin north of the Equator relative to preindustrial times. In addition, negative trends in oxygen extend globally below 2000m depth, though their magnitude is rather weak, and in particular bottom waters remain above suboxic levels. Changes in dust deposition can be responsible for positive trends in reactive P burial as simulated at the LGM in open ocean regions, notably over the Southwest Atlantic and Northwest Pacific; on the other hand, inputs of terrigenous material from shelves cause an increase in P burial over the continental slope and rise regions which accounts for 47% of the total reactive P burial change. Although the glacial-interglacial trends in P burial in our model compare well with the available observations, this study highlights the need of much more core records of C and P in open ocean settings. [ABSTRACT FROM AUTHOR]

We use the process-based VS (Vaganov-Shashkin) model to investigate whether a regional Pinus halapensis tree-ring chronology from Tunisia can be simulated as a function of climate alone by employing a biological model linking day length and daily temperature and precipitation (AD 1959-2004) from a climate station to ring-width variations. We use two periods to calibrate (1982-2004) and verify (1959-1981) the model. We have obtained highly significant positive correlation between the residual chronology and estimated growth curve (r = 0.76 p < 0.001). The model shows that the average duration of the growing season is 191 days. On average, soil moisture limits tree-ring growth for 128 days and temperature for 63 days. [ABSTRACT FROM AUTHOR]

Atmospheric rivers (ARs) significantly impact the hydrological cycle and associated extremes in western continental regions. Recent studies suggest ARs also influence water resources and extremes in continental interiors. AR detection tools indicate that AR conditions are relatively frequent in areas east of the Rocky Mountains. The origin of these ARs, whether from synoptic‐scale waves or mesoscale processes, is unclear. This study uses meteorological composite maps and transects of AR conditions during the four seasons. The analysis reveals that ARs east of the Rockies are associated with long‐wave, baroclinic Rossby waves. This result demonstrates that eastern North American ARs are dynamically similar to their western coastal counterparts, though mechanisms for vertical moisture flux differ between the two. These findings provide a foundation for understanding future climate change and ARs in this region and offer new methods for evaluating climate model simulations. Plain Language Summary: Atmospheric rivers (ARs) are a weather pattern that brings high amounts of atmospheric water and winds in a relatively narrow region. ARs are typically considered a "west coast" phenomenon, largely because the majority of the scientific research on ARs has focused on ARs in western coastal regions: particularly the western United States (US). ARs occur in continental interiors, but there has been some debate about whether these ARs represent the same type of weather as those in western coastal regions. This paper uses two objective methods for identifying ARs and finds times when ARs are present in three locations in the eastern half of the US: Norman, OK, Bloomington, IN, and Washington, DC. Examination of weather conditions during these AR times shows remarkable similarity to conditions associated with west coast ARs. This gives strong evidence that ARs do occur in the eastern half of the US. This result is important because it suggests that ARs may be important for water resources and extreme weather in the eastern half of the US, just as they are in the western US. This result also suggests that ARs may be important for water resources and extremes in other continental interiors. Key Points: Atmospheric rivers (ARs) east of the Rockies are associated with baroclinic wavesWestern coastal ARs and eastern/midwest ARs are dynamically similarSynoptic‐scale uplift, combined with convective instability, provide efficient mechanisms for generating precipitation [ABSTRACT FROM AUTHOR]

Average monthly air temperatures in Bosnia and Herzegovina (BiH) exhibit a notable rise during summer, ranging from 0.4 to 0.8 °C per decade, while precipitation experiences a significant decrease of up to 8 mm per decade. Climate models, across various RCP scenarios, project an increase in air temperature, that is most pronounced in the summer season. Additionally, there is a projected frequency and intensity of heavy precipitation during autumn. In BiH, agricultural production faces substantial risks, including droughts, spring and autumn frosts, hail, and floods. Recent years have witnessed extreme hydrological events, notably the 2012 drought and the 2014 floods. Strategic documents highlight the critical importance of addressing floods and droughts for agriculture, as well as their implications for the environment, households, and industry. To assess the severity of extreme hydrological events and their impact on agriculture, with a specific emphasis on autumn and summer in Bosnia and Herzegovina, average and peak values of the Standardized precipitation evapotranspiration index (SPEI) were calculated separately for the periods 1961-1990 and 1991-2020, focusing on October and August. Compared to the reference climatic period the current climate is characterized by shifts between intense wet and dry periods, with very few years exhibiting stable and expected weather conditions. Identified as extremely wet and flood-prone years, SPEI2 October values for 1974 (2.42), 1996 (2.13), 2001 (2.24), and 2014 (2.05) stand out, with only one extremely dry year in 1985 (-2.21). SPEI2 August indicates extremely dry years, notably 2012 (-2.35) and 2017 (-2.25). [ABSTRACT FROM AUTHOR]

Oil palms (OP) produce palm oil, a unique commodity without commercial alternatives. A serious disease of OP is basal stem rot (BSR) caused by Ganoderma boninense Pat. Climate change will likely increase BSR, thereby causing mortality of OP and reduced yields of palm oil. Work is being undertaken to produce modified OP (mOP) to resist BSR, although this will take decades for full development, if successfully produced at all. mOP will not be 100% effective, and it would be useful to know the effect of mOP on the key parameters of BSR incidence, OP mortality, and yield loss. The current paper employed CLIMEX modeling of suitable climates for OP and modeling narratives for Indonesia and Thailand. Indonesia is the largest producer of OP and Thailand is a much smaller manufacturer, and it was informative to compare these two countries. The gains from using mOP were substantial compared to the current production of some other continents and countries. The current paper, for the first time, assessed how climate change will affect BSR parameters for conventional and mOP. Greater consideration of the potential benefits of mOP is required to justify investing in the technology. [ABSTRACT FROM AUTHOR]

A reference or "no‐feedback" radiative response to warming is fundamental to understanding how much global warming will occur for a given change in greenhouse gases or solar radiation incident on the Earth. The simplest estimate of this radiative response is given by the Stefan‐Boltzmann law as −4σTe‾3≈−3.8 ${-}4\sigma {\overline{{T}_{e}}}^{3}\approx -3.8$ W m−2 K−1 for Earth's present climate, where Te‾ $\overline{{T}_{e}}$ is a global effective emission temperature. The comparable radiative response in climate models, widely called the "Planck feedback," averages −3.3 W m−2 K−1. This difference of 0.5 W m−2 K−1 is large compared to the uncertainty in the net climate feedback, yet it has not been studied carefully. We use radiative transfer models to analyze these two radiative feedbacks to warming, and find that the difference arises primarily from the lack of stratospheric warming assumed in calculations of the Planck feedback (traditionally justified by differing constraints on and time scales of stratospheric adjustment relative to surface and tropospheric warming). The Planck feedback is thus masked for wavelengths with non‐negligible stratospheric opacity, and this effect implicitly acts to amplify warming in current feedback analysis of climate change. Other differences between Planck and Stefan‐Boltzmann feedbacks arise from temperature‐dependent gas opacities, and several artifacts of nonlinear averaging across wavelengths, heights, and different locations; these effects partly cancel but as a whole slightly destabilize the Planck feedback. Our results point to an important role played by stratospheric opacity in Earth's climate sensitivity, and clarify a long‐overlooked but notable gap in our understanding of Earth's reference radiative response to warming. Plain Language Summary: Earth's climate is stable because a warmer planet loses more energy to space, at infrared wavelengths invisible to the naked eye. The rate of change of this energy loss as the planet warms provides an estimate how Earth's energy balance responds to warming, which is simple enough to write on a small piece of paper. When scientists investigate the warming predicted by climate models, they often start from a similar but not identical calculation of how Earth's energy balance responds to warming. This calculation, based on model output, is about 15% less stabilizing than the simple pencil‐and‐paper estimate. In this paper, we explore the causes of this 15% difference between the pencil‐and‐paper estimate and the calculations using climate models. We show that the difference is primarily caused by the lack of assumed warming in climate models high in Earth's atmosphere, where temperatures are not closely linked to surface warming. This lack of warming acts as a hidden destabilizing feedback in current analysis of climate models. Key Points: Earth's reference radiative response, or "Planck feedback," is ∼0.5 W m−2 K−1 less stabilizing than a Stefan‐Boltzmann estimateWe find this deviation is mostly due to the assumed lack of stratospheric warming in calculations of the Planck feedbackThe lack of stratospheric warming serves as an implicit positive feedback in analysis of climate model warming [ABSTRACT FROM AUTHOR]

Accurate models of planetary boundary layer (PBL) processes are important for forecasting weather and climate. The present study compares seven methods of calculating PBL depth in the GEOS-5 atmospheric general circulation model (AGCM) over land. These methods depend on the eddy diffusion coefficients, bulk and local Richardson numbers, and the turbulent kinetic energy. The computed PBL depths are aggregated to the Köppen climate classes, and some limited comparisons are made using radiosonde profiles. Most methods produce similar midday PBL depths, although in the warm, moist climate classes, the bulk Richardson number method gives midday results that are lower than those given by the eddy diffusion coefficient methods. Additional analysis revealed that methods sensitive to turbulence driven by radiative cooling produce greater PBL depths, this effect being most significant during the evening transition. Nocturnal PBLs based on Richardson number are generally shallower than eddy diffusion coefficient based estimates. The bulk Richardson number estimate is recommended as the PBL height to inform the choice of the turbulent length scale, based on the similarity to other methods during the day, and the improved nighttime behavior. [ABSTRACT FROM AUTHOR]