54 results on '"Sudha Mokkapati"'
Search Results
2. Self-powered MoSe2/ZnO heterojunction photodetectors with current rectification effect and broadband detection
- Author
-
Zhichen Wan, Haoran Mu, Zhuo Dong, Sigui Hu, Wenzhi Yu, Shenghuang Lin, and Sudha Mokkapati
- Subjects
Van der Waals ,Molybdenum disulphide ,Zinc oxide ,Self-powered photodetector ,Materials of engineering and construction. Mechanics of materials ,TA401-492 - Abstract
Recently, n-n junction with large bandgap offset has been reported to be able to realize rectifier function and improve photoresponse in optoelectronic applications. In this work, we demonstrate a simple way to engineer photodetector based on a MoSe2/ZnO heterojunction. ZnO thin film deposited by DC magnetron sputtering and mechanically exfoliated MoSe2 was coupled to form vertical stacking heterostructure. An atomically sharp n-n junction with type-II band alignment and current rectification behaviour is realised. The MoSe2/ZnO based photodetector exhibits a fast photoresponse speed of 40 μs, and a peak responsivity of 2.7 A/W. It is also demonstrated that the MoSe2/ZnO photodiode can operate under self-powered mode over a broad spectrum.
- Published
- 2021
- Full Text
- View/download PDF
3. Ultra-broadband photodetection based on two-dimensional layered Ta2NiSe5 with strong anisotropy and high responsivity
- Author
-
Yan Zhang, Wenzhi Yu, Jie Li, Jie Chen, Zhuo Dong, Liu Xie, Chang Li, Xinyao Shi, Wanlong Guo, Shenghuang Lin, Sudha Mokkapati, and Kai Zhang
- Subjects
2D materials ,Photoconductive ,Broadband ,Photodetector ,Anisotropic ,Materials of engineering and construction. Mechanics of materials ,TA401-492 - Abstract
Broadband photodetectors have attracted substantial attention in recent years. The ternary chalcogenide Ta2NiSe5 is a layered material with a direct narrow-band gap (Eg ~ 0.33 eV) which possesses greatly potential to broadband photodetectors. Here, high-quality bulk Ta2NiSe5 was synthesized by Chemical Vapor Transport (CVT) method. We demonstrate a photodetector based on exfoliated Ta2NiSe5 nanoflake, which exhibits a broadband photo-response from 405 nm to 4300 nm. Meanwhile, its main characteristics are superior to other typical 2D materials: high responsivity ~198.1 A W−1 at 1350 nm and ultrafast response time of ~27.4 µs. Long-time photocurrent reproducibility shows that the photodetector has excellent stability under atmosphere. Furthermore, the scanning photocurrent mapping reveals the photoconductive mechanism of Ta2NiSe5 photodetector. In addition, the anisotropic ratio of the photocurrent is ~1.46. The broadband photodetection, high responsivity, anisotropic and environmental stability achieved simultaneously in Ta2NiSe5 photodetector, which are promising for neotype electronics and optoelectronics field.
- Published
- 2021
- Full Text
- View/download PDF
4. Doping-enhanced radiative efficiency enables lasing in unpassivated GaAs nanowires
- Author
-
Tim Burgess, Dhruv Saxena, Sudha Mokkapati, Zhe Li, Christopher R. Hall, Jeffrey A. Davis, Yuda Wang, Leigh M. Smith, Lan Fu, Philippe Caroff, Hark Hoe Tan, and Chennupati Jagadish
- Subjects
Science - Abstract
Until now, efforts to enhance the performance of nanolasers have focused on reducing the rate of non-radiative recombination. Here, Burgess et al.employ controlled impurity doping to increase the rate of radiative recombination.
- Published
- 2016
- Full Text
- View/download PDF
5. Ultra-broadband photodetection based on two-dimensional layered Ta2NiSe5 with strong anisotropy and high responsivity
- Author
-
Wanlong Guo, Jie Chen, Chang Li, Wenzhi Yu, Sudha Mokkapati, Liu Xie, Kai Zhang, Shenghuang Lin, Xinyao Shi, Jie Li, Zhuo Dong, and Yan Zhang
- Subjects
Materials science ,Photodetector ,Broadband ,02 engineering and technology ,Photodetection ,010402 general chemistry ,01 natural sciences ,Responsivity ,General Materials Science ,Photoconductive ,Anisotropy ,Materials of engineering and construction. Mechanics of materials ,Photocurrent ,business.industry ,Mechanical Engineering ,Photoconductivity ,Anisotropic ,021001 nanoscience & nanotechnology ,2D materials ,0104 chemical sciences ,Mechanics of Materials ,TA401-492 ,Optoelectronics ,0210 nano-technology ,business ,Ultrashort pulse - Abstract
Broadband photodetectors have attracted substantial attention in recent years. The ternary chalcogenide Ta2NiSe5 is a layered material with a direct narrow-band gap (Eg ~ 0.33 eV) which possesses greatly potential to broadband photodetectors. Here, high-quality bulk Ta2NiSe5 was synthesized by Chemical Vapor Transport (CVT) method. We demonstrate a photodetector based on exfoliated Ta2NiSe5 nanoflake, which exhibits a broadband photo-response from 405 nm to 4300 nm. Meanwhile, its main characteristics are superior to other typical 2D materials: high responsivity ~198.1 A W−1 at 1350 nm and ultrafast response time of ~27.4 µs. Long-time photocurrent reproducibility shows that the photodetector has excellent stability under atmosphere. Furthermore, the scanning photocurrent mapping reveals the photoconductive mechanism of Ta2NiSe5 photodetector. In addition, the anisotropic ratio of the photocurrent is ~1.46. The broadband photodetection, high responsivity, anisotropic and environmental stability achieved simultaneously in Ta2NiSe5 photodetector, which are promising for neotype electronics and optoelectronics field.
- Published
- 2021
6. Ultrathin Ta2O5 electron-selective contacts for high efficiency InP solar cells
- Author
-
Hark Hoe Tan, Sudha Mokkapati, Siva Krishna Karuturi, Chennupati Jagadish, Kaushal Vora, Mykhaylo Lysevych, Yiliang Wu, Yimao Wan, Jennifer Wong-Leung, and Parvathala Reddy Narangari
- Subjects
Materials science ,Photoluminescence ,Organic solar cell ,business.industry ,Open-circuit voltage ,Doping ,Heterojunction ,02 engineering and technology ,010402 general chemistry ,021001 nanoscience & nanotechnology ,01 natural sciences ,0104 chemical sciences ,law.invention ,Atomic layer deposition ,law ,Solar cell ,Optoelectronics ,General Materials Science ,0210 nano-technology ,business ,Short circuit - Abstract
Heterojunction solar cells with transition-metal–oxide-based carrier-selective contacts have been gaining considerable research interest owing to their amenability to low-cost fabrication methods and elimination of parasitic absorption and complex semiconductor doping process. In this work, we propose tantalum oxide (Ta2O5) as a novel electron-selective contact layer for photo-generated carrier separation in InP solar cells. We confirm the electron-selective properties of Ta2O5 by investigating band energetics at the InP–Ta2O5 interface using X-ray photoelectron spectroscopy. Time-resolved photoluminescence and power dependent photoluminescence reveal that the Ta2O5 inter-layer also mitigates parasitic recombination at the InP/transparent conducting oxide interface. With an 8 nm Ta2O5 layer deposited using an atomic layer deposition (ALD) system, we demonstrate a planar InP solar cell with an open circuit voltage, Voc, of 822 mV, a short circuit current density, Jsc, of 30.1 mA cm−2, and a fill factor of 0.77, resulting in an overall device efficiency of 19.1%. The Voc is the highest reported value to date for an InP heterojunction solar cells with carrier-selective contacts. The proposed Ta2O5 material may be of interest not only for other solar cell architectures including perovskite cells and organic solar cells, but also across a wide range of optoelectronics applications including solid state emitting devices, photonic crystals, planar light wave circuits etc.
- Published
- 2019
7. Self-powered MoSe2/ZnO heterojunction photodetectors with current rectification effect and broadband detection
- Author
-
Wenzhi Yu, Sigui Hu, Zhichen Wan, Haoran Mu, Shenghuang Lin, Sudha Mokkapati, and Zhuo Dong
- Subjects
Materials science ,business.industry ,Band gap ,Mechanical Engineering ,Self-powered photodetector ,Photodetector ,Heterojunction ,Sputter deposition ,Photodiode ,law.invention ,Responsivity ,Rectification ,Mechanics of Materials ,law ,Zinc oxide ,TA401-492 ,Optoelectronics ,Van der Waals ,General Materials Science ,Thin film ,business ,Materials of engineering and construction. Mechanics of materials ,Molybdenum disulphide - Abstract
Recently, n-n junction with large bandgap offset has been reported to be able to realize rectifier function and improve photoresponse in optoelectronic applications. In this work, we demonstrate a simple way to engineer photodetector based on a MoSe2/ZnO heterojunction. ZnO thin film deposited by DC magnetron sputtering and mechanically exfoliated MoSe2 was coupled to form vertical stacking heterostructure. An atomically sharp n-n junction with type-II band alignment and current rectification behaviour is realised. The MoSe2/ZnO based photodetector exhibits a fast photoresponse speed of 40 μs, and a peak responsivity of 2.7 A/W. It is also demonstrated that the MoSe2/ZnO photodiode can operate under self-powered mode over a broad spectrum.
- Published
- 2021
8. Controlling the lasing modes in random lasers operating in the Anderson localization regime
- Author
-
Ziyuan Li, Sudha Mokkapati, Chennupati Jagadish, Mohammad Rashidi, and Hark Hoe Tan
- Subjects
Physics ,Anderson localization ,business.industry ,Scattering ,Filling factor ,Nanowire ,Physics::Optics ,Laser ,Atomic and Molecular Physics, and Optics ,law.invention ,Optics ,law ,Optoelectronics ,Whispering-gallery wave ,business ,Lasing threshold ,Randomness - Abstract
Random lasers, which rely on random scattering events unlike traditional Fabry-Pérot cavities, are much simpler and cost-effective to fabricate. However, because of the chaotic fluctuations and instability of the lasing modes, controlling the lasing properties is challenging. In this study, we use random InP nanowire (NW) arrays that operate in the Anderson localization regime with stable modes as the random lasers. We show that by changing the design parameters of the NW arrays, such as filling factor, dimensions of the NWs, degree of randomness, and the size of the array, the properties of the lasing modes including the number of modes, lasing wavelengths, and lasing threshold can be controlled.
- Published
- 2021
9. Stable, multi-mode lasing in the strong localization regime from InP random nanowire arrays at low temperature
- Author
-
Sudha Mokkapati, Hark Hoe Tan, and Mohammad Rashidi
- Subjects
Materials science ,Scattering ,business.industry ,Nanowire ,Physics::Optics ,Laser ,Stability (probability) ,Instability ,Atomic and Molecular Physics, and Optics ,Electronic, Optical and Magnetic Materials ,law.invention ,Wavelength ,Quality (physics) ,law ,Optoelectronics ,business ,Lasing threshold - Abstract
Disorder is generally considered an undesired element in lasing action. However, in random lasers whose feedback mechanism is based on random scattering events, disorder plays a very important and critical role. Even though some unique properties in random lasers such as large-angle emission, lasing from different surfaces, large-area manufacturability, and wavelength tunability can be advantageous in certain applications, the applicability of random lasers has been limited due to the chaotic fluctuations and instability of the lasing modes because of weak confinement. To solve this, mode localization could reduce the spatial overlap between lasing modes, thus preventing mode competition and improving stability, leading to laser sources with high quality factors and very low thresholds. Here, by using a random array of III-V nanowires, high-quality-factor localized modes are demonstrated. We present the experimental evidence of strong light localization in multi-mode random nanowire lasers which are temporally stable at low temperatures.
- Published
- 2021
10. Axial p-n junction design and characterization for InP nanowire array solar cells
- Author
-
Lan Fu, Yanan Guo, Hark Hoe Tan, Ziyuan Li, Yesaya C. Wenas, Zhe Li, Ahmed Alabadla, Li Li, F Fouad Karouta, Kun Peng, Kaushal Vora, Fan Wang, Qian Gao, Sudha Mokkapati, and Chennupati Jagadish
- Subjects
Materials science ,Renewable Energy, Sustainability and the Environment ,business.industry ,Doping ,Nanowire ,02 engineering and technology ,Substrate (electronics) ,Electron ,Sputter deposition ,Electroluminescence ,010402 general chemistry ,021001 nanoscience & nanotechnology ,Condensed Matter Physics ,01 natural sciences ,0104 chemical sciences ,Electronic, Optical and Magnetic Materials ,Characterization (materials science) ,Optoelectronics ,Electrical and Electronic Engineering ,0210 nano-technology ,business ,p–n junction - Abstract
In this work, InP nanowire (NW) array solar cells with different axial p‐i‐n junction designs were investigated. The optical properties of the different NW structures were characterized through a series of microphotoluminescence measurements to extract important material parameters such as minority carrier lifetimes and internal quantum efficiencies. A glancing angle sputtering deposition technique has been developed to enable a direct visualization of the p‐n junctions in the vertical array of InP NW solar cells (NWSCs) using electron beam‐induced current (EBIC) technique. Based on EBIC and electrical simulation, it is found that the background doping in NWSC significantly affects the junction position. By modifying the junction design, the width and position of the p‐n junction can be varied effectively. By employing a p‐p−‐n structure, a high junction position (>1 μm from the substrate) and wide depletion width have been achieved as confirmed by EBIC measurement. Moreover, the NW growth substrate does not show any influence on the device behavior due to the fully decoupled junction position, indicating a promising structural design for future development of high‐performance, low‐cost flexible NW devices.
- Published
- 2019
11. Optical study of p-doping in GaAs nanowires for low-threshold and high-yield lasing
- Author
-
Chennupati Jagadish, Alex S. Walton, Stefan Skalsky, Tim Burgess, Patrick Parkinson, Peter Mitchell, Sudha Mokkapati, Juan Arturo Alanis, Dhruv Saxena, Mykhaylo Lysevych, Xiaoyan Tang, and Hark Hoe Tan
- Subjects
PL ,Materials science ,ResearchInstitutes_Networks_Beacons/photon_science_institute ,Nanowire ,Physics::Optics ,Bioengineering ,02 engineering and technology ,Photon Science Institute ,Condensed Matter::Materials Science ,Doping ,General Materials Science ,Spontaneous emission ,III-V Nanowire lasers ,business.industry ,Mechanical Engineering ,General Chemistry ,021001 nanoscience & nanotechnology ,Condensed Matter Physics ,Semiconductor ,Yield (chemistry) ,Optoelectronics ,Quantum efficiency ,0210 nano-technology ,business ,Lasing threshold ,Recombination - Abstract
Semiconductor nanowires suffer from significant non-radiative surface recombination, however, heavy p-type doping has proven to be a viable option to increase the radiative recombination rate and hence quantum efficiency of emission, allowing demonstration of room-temperature lasing. Using a large-scale optical technique, we have studied Zn-doped GaAs nanowires to understand and quantify the effect of doping on growth and lasing properties. We measure the non-radiative recombination rate (knr) to be (0.14 ± 0.04) ps−1 by modelling the internal quantum efficiency (IQE) as a function of doping level. By applying a correlative method, we identify doping and nanowire length as key controllable parameters determining lasing behavior, with reliable room-temperature lasing occurring for p &3 × 1018 cm−3 and lengths & 4 µm. We report a best-in-class core-only near-infrared nanowire lasing threshold of ∼ 10 µJ cm−2 , and using a data-led filtering step, we present a method to simply identify sub-sets of nanowires with over 90% lasing yield.
- Published
- 2018
12. Efficiency enhancement of axial junction InP single nanowire solar cells by dielectric coating
- Author
-
Chennupati Jagadish, Li Li, Guojun Zhang, Lan Fu, Zhe Li, Kun Peng, Zhiming Wang, Zhiqin Zhong, Hark Hoe Tan, Jiang Wu, Ziyuan Li, Qian Gao, Kaushal Vora, and Sudha Mokkapati
- Subjects
Photocurrent ,Materials science ,Passivation ,Renewable Energy, Sustainability and the Environment ,business.industry ,Electron beam-induced current ,Energy conversion efficiency ,food and beverages ,02 engineering and technology ,Quantum dot solar cell ,010402 general chemistry ,021001 nanoscience & nanotechnology ,01 natural sciences ,Polymer solar cell ,0104 chemical sciences ,law.invention ,Surface coating ,law ,Solar cell ,Optoelectronics ,General Materials Science ,Electrical and Electronic Engineering ,0210 nano-technology ,business - Abstract
In this work we demonstrate single axial p-i-n junction InP nanowire (NW) solar cells grown by selective-area metal organic vapor phase epitaxy (SA-MOVPE) technique. A power conversion efficiency of up to 6.5% was realized in the single NW solar cell (horizontally lying on substrate) without any surface passivation. Electron beam induced current (EBIC) and photocurrent mapping were performed to investigate the electrical properties of the NW solar cells and their influence on device performance, which are essential for an in-depth understanding of the design requirements for NW solar cells. A further conformal SiNx layer was deposited on the single NW solar cell devices by plasma-enhanced chemical vapor deposition (PECVD). Overall efficiency improvement has been obtained in the SiNx-coated devices with a remarkable up to 62% increase to a peak efficiency of 10.5%, which to our knowledge is the highest efficiency reported for horizontal single NW solar cells. This has been attributed to an enhanced optical antenna effect and effective surface passivation due to SiNx coating, as respectively confirmed by numerical simulation and time-resolved photoluminescence (TRPL) measurements. Our work demonstrates that dielectric coating is a promising simple approach to achieve high performance III–V NW solar cells.
- Published
- 2016
13. Tantalum Oxide Electron-Selective Heterocontacts for Silicon Photovoltaics and Photoelectrochemical Water Reduction
- Author
-
Yimao Wan, Andres Cuevas, Chennupati Jagadish, Di Yan, Jun Peng, Mark Hettick, Hark Hoe Tan, Parvathala Reddy Narangari, Ali Javey, Sudha Mokkapati, Christian Samundsett, James Bullock, and Siva Krishna Karuturi
- Subjects
Materials science ,Silicon ,Passivation ,Energy Engineering and Power Technology ,chemistry.chemical_element ,02 engineering and technology ,010402 general chemistry ,01 natural sciences ,7. Clean energy ,Atomic layer deposition ,Affordable and Clean Energy ,Photovoltaics ,Materials Chemistry ,Crystalline silicon ,QC ,Renewable Energy, Sustainability and the Environment ,business.industry ,Photovoltaic system ,Energy conversion efficiency ,021001 nanoscience & nanotechnology ,0104 chemical sciences ,Fuel Technology ,chemistry ,Chemistry (miscellaneous) ,Optoelectronics ,Water splitting ,0210 nano-technology ,business - Abstract
Crystalline silicon (c-Si) solar cells have been dominating the photovoltaic (PV) market for decades, and c-Si based photoelectrochemical (PEC) cells are regarded as one of the most promising routes for water splitting and renewable production of hydrogen. In this work, we demonstrate a nanoscale tantalum oxide (TaOx, ∼6 nm) as an electron-selective heterocontact, simultaneously providing high-quality passivation to the silicon surface and effective transport of electrons to either an external circuit or a water-splitting catalyst. The PV application of TaOx is demonstrated by a proof-of-concept device having a conversion efficiency of 19.1%. In addition, the PEC application is demonstrated by a photon-to-current efficiency (with additional applied bias) of 7.7%. These results represent a 2% and 3.8% absolute enhancement over control devices without a TaOx interlayer, respectively. The methods presented in this Letter are not limited to c-Si based devices and can be viewed as a more general approach to the interface engineering of optoelectronic and photoelectrochemical applications.
- Published
- 2018
14. Mode Profiling of Semiconductor Nanowire Lasers
- Author
-
Sudha Mokkapati, Dhruv Saxena, Fan Wang, Qian Gao, Chennupati Jagadish, and Hark Hoe Tan
- Subjects
Profiling (computer programming) ,Materials science ,business.industry ,Mechanical Engineering ,Spatially resolved ,Nanowire ,Mode (statistics) ,Physics::Optics ,Bioengineering ,General Chemistry ,Substrate (electronics) ,Condensed Matter::Mesoscopic Systems and Quantum Hall Effect ,Condensed Matter Physics ,Laser ,law.invention ,Condensed Matter::Materials Science ,Semiconductor ,law ,Optoelectronics ,General Materials Science ,Nanoscience & Nanotechnology ,business ,Lasing threshold ,QC - Abstract
© 2015 American Chemical Society. We experimentally determine the lasing mode(s) in optically pumped semiconductor nanowire lasers. The spatially resolved and angle-resolved far-field emission profiles of single InP nanowire lasers lying horizontally on a SiO2 substrate are characterized in a microphotoluminescence (μ-PL) setup. The experimentally obtained polarization dependent far-field profiles match very well with numerical simulations and enable unambiguous identification of the lasing mode(s). This technique can be applied to characterize lasing modes in other type of nanolasers that are integrated on a substrate in either vertical or horizontal configurations.
- Published
- 2015
15. Large-scale statistics for threshold optimization of optically pumped nanowire lasers
- Author
-
Kun Peng, Sudha Mokkapati, Lan Fu, Dhruv Saxena, Xiaoyan Tang, Chennupati Jagadish, Juan Arturo Alanis, Nian Jiang, Patrick Parkinson, and Hark Hoe Tan
- Subjects
Photoluminescence ,Materials science ,Nanowire ,Physics::Optics ,Bioengineering ,02 engineering and technology ,Substrate (electronics) ,01 natural sciences ,law.invention ,Optics ,law ,0103 physical sciences ,General Materials Science ,QC ,QB ,010302 applied physics ,business.industry ,Mechanical Engineering ,General Chemistry ,021001 nanoscience & nanotechnology ,Condensed Matter Physics ,Laser ,Characterization (materials science) ,Gain-switching ,Core (optical fiber) ,Optoelectronics ,0210 nano-technology ,business ,Lasing threshold - Abstract
Single nanowire lasers based on bottom-up III-V materials have been shown to exhibit room-temperature near-infrared lasing, making them highly promising for use as nanoscale, silicon-integrable and coherent light sources. While lasing behavior is reproducible, small variations in growth conditions across a substrate arising from the use of bottom-up growth techniques can introduce inter-wire disorder, either through geometric or material inhomogeneity. Nanolasers critically depend on both high material quality and tight dimensional tolerances, and as such, lasing threshold is both sensitive to, and a sensitive probe of such inhomogeneity. We present an all-optical characterization technique coupled to statistical analysis to correlate geometrical, and material parameters with lasing threshold. For these multiple-quantum-well nanolasers, it is found that low threshold is closely linked to longer lasing wavelength caused by losses in the core, providing a route to optimized future low-threshold devices. A best-in-group room temperature lasing threshold of 43 uJcm-2 under pulsed excitation was found, and overall device yields in excess of 50% are measured, demonstrating a promising future for the nanolaser architecture.
- Published
- 2017
16. Excited State Biexcitons in Atomically Thin MoSe2
- Author
-
Jin-Cheng Zheng, Xibin Wang, Jiajie Pei, Jiong Yang, Hark Hoe Tan, Qing-Hua Qin, Tie-Yu Lü, Sudha Mokkapati, Dragomir N. Neshev, Chennupati Jagadish, Yuerui Lu, and Fan Wang
- Subjects
Photon ,Binding energy ,General Physics and Astronomy ,02 engineering and technology ,010402 general chemistry ,7. Clean energy ,01 natural sciences ,General Materials Science ,Nanoscience & Nanotechnology ,Biexciton ,Condensed Matter::Quantum Gases ,Physics ,Condensed Matter::Other ,business.industry ,General Engineering ,Condensed Matter::Mesoscopic Systems and Quantum Hall Effect ,021001 nanoscience & nanotechnology ,0104 chemical sciences ,Semiconductor ,Excited state ,Trion ,Atomic physics ,0210 nano-technology ,business ,Ground state ,Excitation - Abstract
© 2017 American Chemical Society. The tightly bound biexcitons found in atomically thin semiconductors have very promising applications for optoelectronic and quantum devices. However, there is a discrepancy between theory and experiment regarding the fundamental structure of these biexcitons. Therefore, the exploration of a biexciton formation mechanism by further experiments is of great importance. Here, we successfully triggered the emission of biexcitons in atomically thin MoSe2, via the engineering of three critical parameters: dielectric screening, density of trions, and excitation power. The observed binding energy and formation dynamics of these biexcitons strongly support the model that the biexciton consists of a charge attached to a trion (excited state biexciton) instead of four spatially symmetric particles (ground state biexciton). More importantly, we found that the excited state biexcitons not only can exist at cryogenic temperatures but also can be triggered at room temperature in a freestanding bilayer MoSe2. The demonstrated capability of biexciton engineering in atomically thin MoSe2 provides a route for exploring fundamental many-body interactions and enabling device applications, such as bright entangled photon sources operating at room temperature.
- Published
- 2017
17. Strong amplified spontaneous emission from high quality GaAs1−xSbx single quantum well nanowires
- Author
-
Hark Hoe Tan, Mark Lockrey, Sudha Mokkapati, Dhruv Saxena, Philippe Caroff, Fan Wang, Chennupati Jagadish, and Xiaoming Yuan
- Subjects
Amplified spontaneous emission ,Materials science ,Quantum point contact ,Nanowire ,Physics::Optics ,02 engineering and technology ,01 natural sciences ,Condensed Matter::Materials Science ,0103 physical sciences ,Physical and Theoretical Chemistry ,Quantum well ,QC ,010302 applied physics ,Condensed Matter::Other ,business.industry ,Quantum wire ,021001 nanoscience & nanotechnology ,Condensed Matter::Mesoscopic Systems and Quantum Hall Effect ,Surfaces, Coatings and Films ,Electronic, Optical and Magnetic Materials ,General Energy ,Quantum dot laser ,Quantum dot ,Optoelectronics ,Quantum efficiency ,0210 nano-technology ,business - Abstract
Quantum confinement in semiconductor nanowires is of contemporary interest. Enhancing the quantum efficiency of quantum wells in nanowires and minimizing intrinsic absorption are necessary for reducing the threshold of nanowire lasers and are promising for wavelength tunable emitters and detectors. Here, we report on growth and optimization of GaAs1–xSbx/Al1–yGayAs quantum well heterostructures formed radially around pure zinc blende GaAs core nanowires. The emitted photon energy from GaAs0.89Sb0.11 quantum well (1.371 eV) is smaller than the GaAs core, thus showing advantages over GaAs/Al1–yGayAs quantum well nanowires in photon emission. The high optical quality quantum well (internal quantum efficiency reaches as high as 90%) is carefully positioned so that the quantum well coincides with the maximum of the transverse electric (TE01) mode intensity profile. The obtained superior optical performance combined with the supported Fabry–Perot (F–P) cavity in the nanowire leads to the strong amplified spontaneous emission (ASE). Detailed studies of the amplified cavity mode are carried out by spatial–spectral photoluminescence (PL) imaging, where emission from nanowire is resolved both spatially and spectrally. Resonant emission is generated at nanowire ends and is polarized perpendicular to the nanowire, in agreement with the simulated polarization characteristics of the TE01 mode in the nanowire. The observation of strong ASE for single QW nanowire at room temperature shows the potential application of GaAs1–xSbx QW nanowires as low threshold infrared nanowire lasers.
- Published
- 2017
18. Selective-Area Epitaxy of Pure Wurtzite InP Nanowires: High Quantum Efficiency and Room-Temperature Lasing
- Author
-
Li Li, Philippe Caroff, Qian Gao, Lan Fu, Chennupati Jagadish, Jennifer Wong-Leung, Hark Hoe Tan, Fan Wang, Sudha Mokkapati, Dhruv Saxena, and Yanan Guo
- Subjects
Quantum optics ,Materials science ,business.industry ,Mechanical Engineering ,Nanowire ,Physics::Optics ,Bioengineering ,General Chemistry ,Condensed Matter::Mesoscopic Systems and Quantum Hall Effect ,Condensed Matter Physics ,Epitaxy ,Condensed Matter::Materials Science ,Selective area epitaxy ,Optoelectronics ,General Materials Science ,Quantum efficiency ,Nanoscience & Nanotechnology ,Photonics ,business ,Lasing threshold ,Wurtzite crystal structure - Abstract
© 2014 American Chemical Society. We report the growth of stacking-fault-free and taper-free wurtzite InP nanowires with diameters ranging from 80 to 600 nm using selective-area metal-organic vapor-phase epitaxy and experimentally determine a quantum efficiency of μ50%, which is on par with InP epilayers. We also demonstrate room-temperature, photonic mode lasing from these nanowires. Their excellent structural and optical quality opens up new possibilities for both fundamental quantum optics and optoelectronic devices.
- Published
- 2014
19. Guest Editorial: Selected Papers from Semiconductor and Integrated Optoelectronics (SIOE) 2018
- Author
-
Sudha Mokkapati
- Subjects
Engineering ,Semiconductor ,business.industry ,Nanotechnology ,Electrical and Electronic Engineering ,business ,Atomic and Molecular Physics, and Optics - Published
- 2019
20. Polarization Tunable, Multicolor Emission from Core–Shell Photonic III–V Semiconductor Nanowires
- Author
-
Chennupati Jagadish, Sudha Mokkapati, Dhruv Saxena, Jennifer Wong-Leung, Patrick Parkinson, Nian Jiang, Qiang Gao, and Hark Hoe Tan
- Subjects
Plasmonic nanoparticles ,Materials science ,business.industry ,Mechanical Engineering ,Nanowire ,Physics::Optics ,Bioengineering ,Heterojunction ,Nanotechnology ,General Chemistry ,Condensed Matter::Mesoscopic Systems and Quantum Hall Effect ,Condensed Matter Physics ,Polarization (waves) ,Condensed Matter::Materials Science ,Semiconductor ,Physics::Atomic and Molecular Clusters ,Optoelectronics ,General Materials Science ,Quantum efficiency ,Photonics ,business ,Plasmon - Abstract
We demonstrate luminescence from both the core and the shell of III-V semiconductor photonic nanowires by coupling them to plasmonic silver nanoparticles. This demonstration paves the way for increasing the quantum efficiency of large surface area nanowire light emitters. The relative emission intensity from the core and the shell is tuned by varying the polarization of the excitation source since their polarization response can be independently controlled. Independent control on emission wavelength and polarization dependence of emission from core-shell nanowire heterostructures opens up opportunities that have not yet been imagined for nanoscale polarization sensitive, wavelength-selective, or multicolor photonic devices based on single nanowires or nanowire arrays.
- Published
- 2012
21. Optically pumped room-temperature GaAs nanowire lasers
- Author
-
Patrick Parkinson, Qiang Gao, Chennupati Jagadish, Sudha Mokkapati, Hark Hoe Tan, Nian Jiang, and Dhruv Saxena
- Subjects
3D optical data storage ,Materials science ,business.industry ,Infrared ,Nanowire ,Context (language use) ,Laser ,Atomic and Molecular Physics, and Optics ,Electronic, Optical and Magnetic Materials ,Semiconductor laser theory ,law.invention ,Semiconductor ,law ,Optoelectronics ,business ,Lasing threshold - Abstract
Near-infrared lasers are important for optical data communication, spectroscopy and medical diagnosis. Semiconductor nanowires offer the possibility of reducing the footprint of devices for three-dimensional device integration and hence are being extensively studied in the context of optoelectronic devices. Although visible and ultraviolet nanowire lasers have been demonstrated widely, progress towards room-temperature infrared nanowire lasers has been limited because of material quality issues and Auger recombination. (Al)GaAs is an important material system for infrared lasers that is extensively used for conventional lasers. GaAs has a very large surface recombination velocity, which is a serious issue for nanowire devices because of their large surface-to-volume ratio. Here, we demonstrate room-temperature lasing in core-shell-cap GaAs/AlGaAs/GaAs nanowires by properly designing the Fabry-Pérot cavity, optimizing the material quality and minimizing surface recombination. Our demonstration is a major step towards incorporating (Al)GaAs nanowire lasers into the design of nanoscale optoelectronic devices operating at near-infrared wavelengths. © 2013 Macmillan Publishers Limited. All rights reserved.
- Published
- 2016
22. Enhanced minority carrier lifetimes in GaAs/AlGaAs core-shell nanowires through shell growth optimization
- Author
-
Jennifer Wong-Leung, Sudha Mokkapati, Joanne Etheridge, Qiang Gao, Patrick Parkinson, Hark Hoe Tan, Chennupati Jagadish, Changlin Zheng, Nian Jiang, and Steffen Breuer
- Subjects
Materials science ,business.industry ,Mechanical Engineering ,Analytical chemistry ,Shell (structure) ,Nanowire ,Bioengineering ,General Chemistry ,Chemical vapor deposition ,Carrier lifetime ,Condensed Matter Physics ,Dark field microscopy ,Scanning transmission electron microscopy ,Optoelectronics ,General Materials Science ,Metalorganic vapour phase epitaxy ,business ,Quantum tunnelling - Abstract
The effects of AlGaAs shell thickness and growth time on the minority carrier lifetime in the GaAs core of GaAs/AlGaAs core-shell nanowires grown by metal-organic chemical vapor deposition are investigated. The carrier lifetime increases with increasing AlGaAs shell thickness up to a certain value as a result of reducing tunneling probability of carriers through the AlGaAs shell, beyond which the carrier lifetime reduces due to the diffusion of Ga-Al and/or impurities across the GaAs/AlGaAs heterointerface. Interdiffusion at the heterointerface is observed directly using high-angle annular dark field scanning transmission electron microscopy. We achieve room temperature minority carrier lifetimes of 1.9 ns by optimizing the shell growth with the intention of reducing the effect of interdiffusion.
- Published
- 2016
23. Nanostructure photovoltaics based on III-V compound semiconductors
- Author
-
H. F. Lu, Patrick Parkinson, Sudha Mokkapati, Zhe Li, Chennupati Jagadish, Steffen Breuer, H.H. Tan, J. Lee, S. Turner, Greg Jolley, and Lan Fu
- Subjects
Materials science ,Nanostructure ,business.industry ,Photovoltaic system ,Nanowire ,Physics::Optics ,Nanotechnology ,Condensed Matter::Mesoscopic Systems and Quantum Hall Effect ,Nanomaterials ,Condensed Matter::Materials Science ,Semiconductor ,Solar cell efficiency ,Photovoltaics ,Quantum dot ,Optoelectronics ,business - Abstract
In this work, solar cells based on III-V compound semiconductor quantum dots and nanowires are demonstrated. Experimental results based on material and device studies will be presented and discussed for high efficiency photovoltaic applications. © OSA 2013.
- Published
- 2016
24. Quantum dots and nanowires for photonics applications
- Author
-
Qiang Gao, H.H. Tan, Sudha Mokkapati, Hannah J. Joyce, Yong Kim, and Chennupati Jagadish
- Subjects
Materials science ,Photoluminescence ,business.industry ,Condensed Matter::Other ,Superlattice ,Nanowire ,Physics::Optics ,Heterojunction ,Chemical vapor deposition ,Condensed Matter::Mesoscopic Systems and Quantum Hall Effect ,Gallium arsenide ,chemistry.chemical_compound ,Condensed Matter::Materials Science ,chemistry ,Quantum dot ,Optoelectronics ,Metalorganic vapour phase epitaxy ,business - Abstract
We review our results on integrated photonic devices fabricated using In GaAs quantum-dots. Selective-area metal organic chemical vapor deposition (MOCVD) is used to grow the active region with quantum dots emitting at different wavelengths for fabrication of the integrated devices. We will also review the structural and optical properties of III-V nanowires, and axial and radial nanowire heterostructures grown by MOCVD. In addition to binary nanowires, such as GaAs, In As, and InP, we have demonstrated ternary In GaAs and Alga as nanowires. Core-shell nanowires consisting of GaAs cores with Alga as shells, and core-multi shell nanowires with several alternating shells of Alga as and GaAs, exhibit strong photoluminescence. Axial segments of In GaAs have been incorporated within GaAs nanowires to form GaAs/In GaAs nanowire superlattices.
- Published
- 2016
25. Design and Room-Temperature Operation of GaAs/AlGaAs Multiple Quantum Well Nanowire Lasers
- Author
-
Xiaoming Yuan, Yanan Guo, Sudha Mokkapati, Hark Hoe Tan, Dhruv Saxena, Nian Jiang, and Chennupati Jagadish
- Subjects
Materials science ,Multiple quantum ,Nanowire ,Physics::Optics ,Bioengineering ,02 engineering and technology ,Fluence ,law.invention ,Condensed Matter::Materials Science ,020210 optoelectronics & photonics ,Optics ,law ,0202 electrical engineering, electronic engineering, information engineering ,General Materials Science ,QC ,business.industry ,Mechanical Engineering ,Heterojunction ,General Chemistry ,021001 nanoscience & nanotechnology ,Condensed Matter Physics ,Polarization (waves) ,Laser ,Condensed Matter::Mesoscopic Systems and Quantum Hall Effect ,Optoelectronics ,Coaxial ,0210 nano-technology ,business ,Lasing threshold - Abstract
We present the design and room-temperature lasing characteristics of single nanowires containing coaxial GaAs/AlGaAs multiple quantum well (MQW) active regions. The TE01 mode, which has a doughnut-shaped intensity profile and is polarized predominantly in-plane to the MQWs, is predicted to lase in these nanowire heterostructures and is thus chosen for the cavity design. Through gain and loss calculations, we determine the nanowire dimensions required to minimize loss for the TE01 mode and determine the optimal thickness and number of QWs for minimizing the threshold sheet carrier density. In particular, we show that there is a limit to the minimum and maximum number of QWs that are required for room-temperature lasing. Based on our design, we grew nanowires of a suitable diameter containing eight uniform coaxial GaAs/AlGaAs MQWs. Lasing was observed at room temperature from optically pumped single nanowires and was verified to be from TE01 mode by polarization measurements. The GaAs MQW nanowire lasers have a threshold fluence that is a factor of 2 lower than that previously demonstrated for room-temperature GaAs nanowire lasers.
- Published
- 2016
26. Doping-enhanced radiative efficiency enables lasing in unpassivated GaAs nanowires
- Author
-
Sudha Mokkapati, Chennupati Jagadish, Jeffrey A. Davis, Christopher R. Hall, Philippe Caroff, Yuda Wang, Lan Fu, Leigh M. Smith, Hark Hoe Tan, Tim Burgess, Zhe Li, and Dhruv Saxena
- Subjects
Materials science ,Passivation ,Differential gain ,Science ,Nanowire ,General Physics and Astronomy ,02 engineering and technology ,01 natural sciences ,Article ,General Biochemistry, Genetics and Molecular Biology ,0103 physical sciences ,010306 general physics ,QC ,Multidisciplinary ,business.industry ,General Chemistry ,Carrier lifetime ,021001 nanoscience & nanotechnology ,Semiconductor ,Optoelectronics ,Quantum efficiency ,Photonics ,0210 nano-technology ,business ,Lasing threshold - Abstract
Nanolasers hold promise for applications including integrated photonics, on-chip optical interconnects and optical sensing. Key to the realization of current cavity designs is the use of nanomaterials combining high gain with high radiative efficiency. Until now, efforts to enhance the performance of semiconductor nanomaterials have focused on reducing the rate of non-radiative recombination through improvements to material quality and complex passivation schemes. Here we employ controlled impurity doping to increase the rate of radiative recombination. This unique approach enables us to improve the radiative efficiency of unpassivated GaAs nanowires by a factor of several hundred times while also increasing differential gain and reducing the transparency carrier density. In this way, we demonstrate lasing from a nanomaterial that combines high radiative efficiency with a picosecond carrier lifetime ready for high speed applications., Until now, efforts to enhance the performance of nanolasers have focused on reducing the rate of non-radiative recombination. Here, Burgess et al. employ controlled impurity doping to increase the rate of radiative recombination.
- Published
- 2016
27. Indium phosphide based solar cell using ultra-thin ZnO as an electron selective layer
- Author
-
Fiacre Rougieux, Sudha Mokkapati, Vidur Raj, Hark Hoe Tan, Mykhaylo Lysevych, Lan Fu, Kaushal Vora, Chennupati Jagadish, and Tâmara Sibele dos Santos
- Subjects
Materials science ,Acoustics and Ultrasonics ,Passivation ,02 engineering and technology ,Substrate (electronics) ,010402 general chemistry ,01 natural sciences ,law.invention ,chemistry.chemical_compound ,law ,Solar cell ,Homojunction ,Thin film ,business.industry ,Heterojunction ,021001 nanoscience & nanotechnology ,Condensed Matter Physics ,0104 chemical sciences ,Surfaces, Coatings and Films ,Electronic, Optical and Magnetic Materials ,chemistry ,Indium phosphide ,Optoelectronics ,Quantum efficiency ,0210 nano-technology ,business - Abstract
According to the Shockley–Queisser limit, the maximum achievable efficiency for a single junction solar cell is ~33.2% which corresponds to a bandgap (E g) of 1.35 eV (InP). However, the maximum reported efficiency for InP solar cells remain at 24.2% ± 0.5%, that is >25% below the standard Shockley–Queisser limit. Through a wide range of simulations, we propose a new device structure, ITO/ ZnO/i-InP/p+ InP (p-i-ZnO-ITO) which might be able to fill this efficiency gap. Our simulation shows that the use of a thin ZnO layer improves passivation of the underlying i-InP layer and provides electron selectivity leading to significantly higher efficiency when compared to their n+/i/p+ homojunction counterpart. As a proof-of-concept, we fabricated ITO/ZnO/i-InP solar cell on a p+ InP substrate and achieved an open-circuit voltage (V oc) and efficiency as high as 819 mV and 18.12%, respectively, along with ~90% internal quantum efficiency. The entire device fabrication process consists of four simple steps which are highly controllable and reproducible. This work lays the foundation for a new generation of thin film InP solar cells based solely on carrier selective heterojunctions without the requirement of extrinsic doping and can be particularly useful when p- and n-doping are challenging as in the case of III–V nanostructures.
- Published
- 2018
28. Modal refractive index measurement in nanowire lasers—a correlative approach
- Author
-
Sudha Mokkapati, Juan Arturo Alanis, Lan Fu, Hark Hoe Tan, Chennupati Jagadish, Patrick Parkinson, Kun Peng, Dhruv Saxena, and Nian Jiang
- Subjects
Materials science ,Biomedical Engineering ,Nanowire ,Physics::Optics ,Bioengineering ,02 engineering and technology ,Electron ,Multimodal characterisation ,01 natural sciences ,law.invention ,law ,0103 physical sciences ,General Materials Science ,Electrical and Electronic Engineering ,Spectroscopy ,III-V Nanowire lasers ,010302 applied physics ,business.industry ,Nanolaser ,General Chemistry ,Condensed Matter::Mesoscopic Systems and Quantum Hall Effect ,021001 nanoscience & nanotechnology ,Laser ,Atomic and Molecular Physics, and Optics ,Modal ,Optoelectronics ,0210 nano-technology ,business ,Refractive index ,Lasing threshold - Abstract
We present a method to correlate multimodal measurements—namely optical spectroscopy and electron microscopy—over large ensembles of randomly distributed single nano-objects. Using an algorithmic approach derived from astrometry, a marker-free method of uniquely associating nano-objects characterised using multiple techniques is described. This approach is applied to nanolasers, enabling an experimental calculation of modal refractive index in sub-micron diameter nanowires. By matching the lasing spectrum and electron microscopy image of 13 nanowire lasers, the refractive index of the TE01 mode in GaAs/AlGaAs multiple-quantum well nanolasers is determined to be n g = 4.7 ± 0.3.
- Published
- 2018
29. Nonlinear Optics: Nonlinear Absorption Applications of CH3 NH3 PbBr3 Perovskite Crystals (Adv. Funct. Mater. 18/2018)
- Author
-
Chun-Ho Lin, Tzu Chiao Wei, Sudha Mokkapati, Gong-Ru Lin, Chennupati Jagadish, Ting-You Li, and Jr-Hau He
- Subjects
Biomaterials ,Nonlinear absorption ,Materials science ,business.industry ,Electrochemistry ,Optoelectronics ,Nonlinear optics ,Condensed Matter Physics ,business ,Two-photon absorption ,Electronic, Optical and Magnetic Materials ,Perovskite (structure) - Published
- 2018
30. Nonlinear Absorption Applications of CH 3 NH 3 PbBr 3 Perovskite Crystals
- Author
-
Ting-You Li, Sudha Mokkapati, Jr-Hau He, Gong-Ru Lin, Chennupati Jagadish, Chun-Ho Lin, and Tzu Chiao Wei
- Subjects
Photoluminescence ,Materials science ,business.industry ,Physics::Optics ,Nonlinear optics ,02 engineering and technology ,010402 general chemistry ,021001 nanoscience & nanotechnology ,Condensed Matter Physics ,Laser ,01 natural sciences ,Ray ,Ferroelectricity ,Two-photon absorption ,0104 chemical sciences ,Electronic, Optical and Magnetic Materials ,law.invention ,Biomaterials ,law ,Electrochemistry ,Optoelectronics ,0210 nano-technology ,business ,Single crystal ,Perovskite (structure) - Abstract
Researchers have recently revealed that hybrid lead halide perovskites exhibit ferroelectricity, which is often associated with other physical characteristics, such as a large nonlinear optical response. In this work, we study the non-linear optical properties of single crystal inorganic-organic hybrid perovskite CH3NH3PbBr3. By exciting the material with a 1044 nm laser, we were able to observe strong two-photon absorption-induced photoluminescence in the green spectral region. Using the transmission open-aperture Z-scan technique, we estimated the values of the two-photon absorption coefficient to be 8.5 cm GW-1, which is much higher than that of standard two-photon absorbing materials that are industrially used in nonlinear optical applications, such as LiNbO3, LiTaO3, KTiOPO4, and KH2PO4. Such a strong two-photon absorption effect in CH3NH3PbBr3 can be used to modulate the spectral and spatial profiles of laser pulses, as well as reduce noise, and can be used to strongly control the intensity of incident light. In this study, we demonstrate the superior optical limiting, pulse reshaping, and stabilization properties of CH3NH3PbBr3, opening new applications for perovskites in nonlinear optics.
- Published
- 2018
31. III-V compound SC for optoelectronic devices
- Author
-
Sudha Mokkapati and Chennupati Jagadish
- Subjects
Optical fiber ,Materials science ,Infrared ,business.industry ,Mechanical Engineering ,Condensed Matter Physics ,law.invention ,Solid-state lighting ,Materials Science(all) ,law ,Mechanics of Materials ,Optoelectronics ,Compound semiconductor ,General Materials Science ,business ,Light-emitting diode - Abstract
III-V compound semiconductors (SC) have played a crucial role in the development of optoelectronic devices for a broad range of applications. Major applications of InP or GaAs based III-V compound SC are devices for optical fiber communications, infrared and visible LEDs/LDs and high efficiency solar cells. GaN based compounds are extremely important for short wavelength light emitters used in solid state lighting systems. We review the important device applications of various III-V compound SC materials.
- Published
- 2009
- Full Text
- View/download PDF
32. Optical design of nanowire absorbers for wavelength selective photodetectors
- Author
-
Chennupati Jagadish, Sudha Mokkapati, Dhruv Saxena, and Hark Hoe Tan
- Subjects
Photocurrent ,Multidisciplinary ,Materials science ,business.industry ,Nanowire ,Shell (structure) ,Photodetector ,Physics::Optics ,Dielectric ,Bioinformatics ,Condensed Matter::Mesoscopic Systems and Quantum Hall Effect ,Article ,Wavelength ,Condensed Matter::Materials Science ,Planar ,Semiconductor ,Optoelectronics ,business ,QC - Abstract
We propose the optical design for the absorptive element of photodetectors to achieve wavelength selective photo response based on resonant guided modes supported in semiconductor nanowires. We show that the waveguiding properties of nanowires result in very high absorption efficiency that can be exploited to reduce the volume of active semiconductor compared to planar photodetectors, without compromising the photocurrent. We present a design based on a group of nanowires with varying diameter for multi-color photodetectors with small footprint. We discuss the effect of a dielectric shell around the nanowires on the absorption efficiency and present a simple approach to optimize the nanowire diameter-dielectric shell thickness for maximizing the absorption efficiency.
- Published
- 2015
33. Quantum Dots and Nanowires Grown by Metal–Organic Chemical Vapor Deposition for Optoelectronic Device Applications
- Author
-
Penelope Lever McGowan, Chennupati Jagadish, Manuela Buda, Sudha Mokkapati, H.H. Tan, Yong Kim, Kallista Sears, and Lan Fu
- Subjects
Materials science ,business.industry ,Nanowire ,Energy Engineering and Power Technology ,Photodetector ,Nanotechnology ,Chemical vapor deposition ,Laser ,law.invention ,Semiconductor laser theory ,law ,Quantum dot ,Quantum dot laser ,Optoelectronics ,Metalorganic vapour phase epitaxy ,Electrical and Electronic Engineering ,business - Abstract
This paper discusses the growth of In(Ga)As quantum dots (QDs) and nanowires by metal-organic chemical vapor deposition and their application to optoelectronic devices. The performance characteristics of QD lasers and QD photodetectors as well as the selective area growth of QDs for integrated devices are reported
- Published
- 2006
34. Selective area epitaxial growth of InP nanowire array for solar cell applications
- Author
-
Lan Fu, Li Li, Hark Hoe Tan, Ziyuan Li, Yesaya C. Wenas, Fan Wang, Chennupati Jagadish, Sudha Mokkapati, Qiang Gao, Kun Peng, Zhe Li, and Yanan Guo
- Subjects
Materials science ,business.industry ,Nanowire ,Carrier lifetime ,Epitaxy ,law.invention ,Selective area epitaxy ,law ,Solar cell ,Optoelectronics ,Metalorganic vapour phase epitaxy ,business ,Wurtzite crystal structure ,Stacking fault - Abstract
© 2014 IEEE. InP nanowire arrays have been grown and optimized using selective area epitaxy by metalorganic chemical vapour deposition technique. High quality stacking fault free wurtzite nanowires with a wide range of diameters and room temperature minority carrier lifetime as high as ∼ 1.6 ns have been obtained. An axially doped n-i-p structure was further grown and successfully fabricated into solar cell devices. The photovoltaic behaviors of the device have been investigated and compared to simulation results.
- Published
- 2014
35. Carrier dynamics in p-type InGaAs/GaAs quantum dots
- Author
-
Chennupati Jagadish, Jeffrey A. Davis, Lap Van Dao, Xiaoming Wen, Peter Hannaford, Sudha Mokkapati, and Hoe Hark Tan
- Subjects
Materials science ,Photoluminescence ,Condensed matter physics ,Scattering ,business.industry ,Phonon ,Doping ,Relaxation (NMR) ,Condensed Matter::Mesoscopic Systems and Quantum Hall Effect ,Condensed Matter Physics ,Atomic and Molecular Physics, and Optics ,Electronic, Optical and Magnetic Materials ,Photoexcitation ,Condensed Matter::Materials Science ,Semiconductor ,Quantum dot ,Condensed Matter::Superconductivity ,Condensed Matter::Strongly Correlated Electrons ,Electrical and Electronic Engineering ,business - Abstract
In this study we investigate the carrier relaxation dynamics in p-type doped InGaAs/GaAs quantum dots using time-integrated and time-resolved photoluminescence. The experiment shows that while a strong phonon bottleneck is observed in the undoped samples, with a 680 ps rise time of the photoluminescence intensity, the intra-dot relaxation time (31 ps) of the p-type doped samples is reduced significantly due to scattering of photo-excited electrons with the doping-induced holes.
- Published
- 2007
36. Review on photonic properties of nanowires for photovoltaics [Invited]
- Author
-
Sudha Mokkapati and Chennupati Jagadish
- Subjects
010302 applied physics ,Materials science ,business.industry ,Open-circuit voltage ,Doping ,Nanowire ,Physics::Optics ,02 engineering and technology ,Condensed Matter::Mesoscopic Systems and Quantum Hall Effect ,021001 nanoscience & nanotechnology ,Solar energy ,01 natural sciences ,Atomic and Molecular Physics, and Optics ,Condensed Matter::Materials Science ,Solar cell efficiency ,Semiconductor ,Photovoltaics ,0103 physical sciences ,Optoelectronics ,0210 nano-technology ,business ,Short circuit - Abstract
III-V semiconductor nanowires behave as optical antennae because of their shape anisotropy and high refractive index. The antennae like behavior modifies the absorption and emission properties of nanowires compared to planar materials. Nanowires absorb light more efficiently compared to an equivalent volume planar material, leading to higher short circuit current densities. The modified emission from the nanowires has the potential to increase the open circuit voltage from nanowire solar cells compared to planar solar cells. In order to achieve high efficiency nanowire solar cells it is essential to control the surface state density and doping in nanowires. We review the physics of nanowire solar cells and progress made in addressing the surface recombination and doping of nanowires, with emphasis on GaAs and InP materials.
- Published
- 2016
37. Enhanced luminescence from GaN nanopillar arrays fabricated using a top-down process
- Author
-
Sudha Mokkapati, Kaushal Vora, Shagufta Naureen, F Fouad Karouta, Chennupati Jagadish, Hark Hoe Tan, Naeem Shahid, and N. Parvathala Reddy
- Subjects
010302 applied physics ,Materials science ,Photoluminescence ,Fabrication ,business.industry ,Mechanical Engineering ,Enhanced luminescence ,Finite-difference time-domain method ,Bioengineering ,Nanotechnology ,02 engineering and technology ,General Chemistry ,021001 nanoscience & nanotechnology ,Epitaxy ,01 natural sciences ,Mechanics of Materials ,0103 physical sciences ,Optoelectronics ,General Materials Science ,Quantum efficiency ,Electrical and Electronic Engineering ,0210 nano-technology ,business ,Nanopillar - Abstract
We report the fabrication of GaN nanopillar arrays with good structural uniformity using the top-down approach. The photoluminescence intensity from the nanopillar arrays is enhanced compared to the epilayer. We use finite difference time domain simulations to show that the enhancement in photoluminescence intensity from the nanopillar arrays is a result of anti-reflection properties of the arrays that result in enhanced light absorption and increase light extraction efficiency compared to the epilayer. The measured quantum efficiency of the nanopillars is comparable to that of an epitaxially grown GaN epilayer.
- Published
- 2016
38. Optoelectronic properties of GaAs nanowire photodetector
- Author
-
Jie Tian, Hao Wang, F Fouad Karouta, Qiang Gao, Patrick Parkinson, P. Prasai, Chennupati Jagadish, Lan Fu, Dhruv Saxena, Sudha Mokkapati, and H.H. Tan
- Subjects
Photocurrent ,Materials science ,Photon ,business.industry ,Nanowire ,Photodetector ,Schottky diode ,Spectral response ,Gallium arsenide ,chemistry.chemical_compound ,chemistry ,Optoelectronics ,Microelectronics ,business - Abstract
A single GaAs nanowire (NW) photodetector (PD) is fabricated based on the back-to-back Schottky diode structure. Optoelectronic properties are characterized by measuring device photocurrent, and also the spectral response, which indicates our device is very sensitive and applicable as a PD. © 2012 IEEE.
- Published
- 2012
39. Resonant SPP modes supported by discrete metal nanoparticles on high-index substrates
- Author
-
Ewold Verhagen, Albert Polman, Fiona J. Beck, Sudha Mokkapati, and Kylie R. Catchpole
- Subjects
Plasmonic nanoparticles ,Materials science ,Scattering ,business.industry ,Mie scattering ,Physics::Optics ,Resonance ,02 engineering and technology ,021001 nanoscience & nanotechnology ,7. Clean energy ,01 natural sciences ,Surface plasmon polariton ,Atomic and Molecular Physics, and Optics ,010309 optics ,Dipole ,Optics ,0103 physical sciences ,Surface plasmon resonance ,0210 nano-technology ,business ,Plasmon - Abstract
We provide a new physical interpretation of scattering from plasmonic nanoparticles on high-index substrates. We demonstrate the excitation of different types of resonant modes on disk-shaped, Ag nanoparticles. At short wavelengths, the resonances are localised at the top of the particle, while at longer wavelengths they are localised at the Ag/substrate interface. We attribute the long wavelength resonances to geometric resonances of surface plasmon polaritons (SPPs) at the Ag/substrate interface. We show that particles that support resonant SPP modes have enhanced scattering cross-sections when placed directly on a high-index substrate; up to 7.5 times larger than that of a dipole scatterer with an equivalent free-space resonance. This has implications for designing scattering nanostructures for light trapping solar cells.
- Published
- 2011
- Full Text
- View/download PDF
40. In(Ga)As/GaAs Quantum Dots Grown by MOCVD for Opto-electronic Device Applications
- Author
-
Chennupati Jagadish, Hoe Hark Tan, Sudha Mokkapati, and Kalista Stewart Sears
- Subjects
Materials science ,business.industry ,Quantum dot ,Optoelectronics ,Metalorganic vapour phase epitaxy ,business - Published
- 2007
41. Integration of quantum dot devices by selective area epitaxy
- Author
-
K.E. McBean, Sudha Mokkapati, Chennupati Jagadish, H.H. Tan, and Matthew R. Phillips
- Subjects
Quantum optics ,Materials science ,business.industry ,Condensed Matter::Other ,Quantum point contact ,Physics::Optics ,Condensed Matter::Mesoscopic Systems and Quantum Hall Effect ,Condensed Matter::Materials Science ,Selective area epitaxy ,Quantum dot ,Quantum dot laser ,Electro-absorption modulator ,Optoelectronics ,business ,Quantum well ,Molecular beam epitaxy - Abstract
The results of nucleation of InGaAs and InAs quantum dots by selective area epitaxy are presented. By pre-patterning the substrates with different (SiO2) mask dimensions, the bandgap of the quantum dots can be tuned over a large range. This technique is used to demonstrate a quantum dot laser integrated with a quantum well waveguide. © 2006 IEEE.
- Published
- 2006
42. Quantum dots and nanowires for optoelectronic device applications
- Author
-
Yong Kim, Chennupati Jagadish, Sudha Mokkapati, Hannah J. Joyce, Qiang Gao, H.H. Tan, P. Lever, and Manuela Buda
- Subjects
Materials science ,business.industry ,Nanowire ,Nanotechnology ,Epitaxy ,chemistry.chemical_compound ,Selective area epitaxy ,chemistry ,Quantum dot laser ,Quantum dot ,Optoelectronics ,Metalorganic vapour phase epitaxy ,business ,Lasing threshold ,Indium gallium arsenide - Abstract
InGaAs quantum dots (QDs) and nanowires have been grown on GaAs by metal-organic chemical vapour deposition on GaAs (100) and (111)B substrates, respectively. InGaAs QD lasers were fabricated and characterised. Results show ground-state lasing at about 1150 nm in devices with lengths greater than 2.5 mm. We also observed a strong influence of nanowire density on nanowire height specific to nanowires with high indium composition. This dependency was attributed to the large difference of diffusion length on (111)B surfaces between In and Ga reaction species, with In being the more mobile species. Selective area epitaxy for applications in quantum-dot optoelectronic device integration is also discussed in this paper. ©2006 IEEE.
- Published
- 2006
43. Periodic dielectric structures for light-trapping in InGaAs/GaAs quantum well solar cells
- Author
-
Sam Turner, Chennupati Jagadish, Sudha Mokkapati, Hark Hoe Tan, Greg Jolley, and Lan Fu
- Subjects
Total internal reflection ,Materials science ,business.industry ,Physics::Optics ,Dielectric ,Grating ,Coupled mode theory ,Atomic and Molecular Physics, and Optics ,Optics ,Optoelectronics ,Physics::Atomic Physics ,business ,Diffraction grating ,Current density ,Plasmon ,Quantum well - Abstract
We study dielectric diffraction gratings for light-trapping in quantum well solar cells and compare their performance with plasmonic and Lambertian light-trapping structures. The optimum structural parameters are identified for symmetric uni-periodic, symmetric bi-periodic and asymmetric bi-periodic gratings. The enhancement in short-circuit current density from the quantum well region with respect to a reference cell with no diffraction grating is calculated. The ratio of this enhancement to the maximum achievable enhancement (i.e. no transmission losses) is 33%, 75% and 74%, respectively for these structures. The optimum asymmetric and symmetric bi-periodic structures perform closest to Lambertian light-trapping, while all three optimum grating structures outperform optimum plasmonic light-trapping. We show that the short-circuit current density from the quantum well region is further enhanced by incorporating a rear reflector.
- Published
- 2013
44. Nanophotonic light trapping in solar cells
- Author
-
Kylie R. Catchpole and Sudha Mokkapati
- Subjects
Materials science ,business.industry ,Nanostructured materials ,Nanophotonics ,General Physics and Astronomy ,Optoelectronics ,Trapping ,business ,Solar energy - Abstract
Nanophotonic light trapping for solar cells is an exciting field that has seen exponential growth in the last few years. There has been a growing appreciation for solar energy as a major solution to the world’s energy problems, and the need to reduce materials costs by the use of thinner solar cells. At the same time, we have the newly developed ability to fabricate controlled structures on the nanoscale quickly and cheaply, and the computational power to optimize the structures and extract physical insights. In this paper, we review the theory of nanophotonic light trapping, with experimental examples given where possible. We focus particularly on periodic structures, since this is where physical understanding is most developed, and where theory and experiment can be most directly compared. We also provide a discussion on the parasitic losses and electrical effects that need to be considered when designing nanophotonic solar cells.
- Published
- 2012
45. Light trapping with plasmonic particles: beyond the dipole model
- Author
-
Fiona J. Beck, Kylie R. Catchpole, and Sudha Mokkapati
- Subjects
Materials science ,Light ,Optical Tweezers ,Physics::Optics ,02 engineering and technology ,01 natural sciences ,Resonance (particle physics) ,010309 optics ,Optics ,0103 physical sciences ,Scattering, Radiation ,Computer Simulation ,Surface plasmon resonance ,Absorption (electromagnetic radiation) ,Plasmon ,business.industry ,Scattering ,Surface plasmon ,Surface Plasmon Resonance ,021001 nanoscience & nanotechnology ,Surface plasmon polariton ,Atomic and Molecular Physics, and Optics ,Models, Chemical ,Nanoparticles ,Optoelectronics ,Particle ,0210 nano-technology ,business - Abstract
Disk-shaped metal nanoparticles on high-index substrates can support resonant surface plasmon polariton (SPP) modes at the interface between the particle and the substrate. We demonstrate that this new conceptual model of nanoparticle scattering allows clear predictive abilities, beyond the dipole model. As would be expected from the nature of the mode, the SPP resonance is very sensitive to the area in contact with the substrate, and insensitive to particle height. We can employ this new understanding to minimise mode out-coupling and Ohmic losses in the particles. Taking into account optical losses due to parasitic absorption and outcoupling of scattered light, we estimate that an optimal array of nanoparticles on a 2 μm Si substrate can provide up to 71% of the enhancement in absorption achievable with an ideal Lambertian rear-reflector. This result compares to an estimate of 67% for conventional pyramid-type light trapping schemes.
- Published
- 2011
46. Comparing nanowire, multijunction, and single junction solar cells in the presence of light trapping
- Author
-
Fiona J. Beck, Sudha Mokkapati, and Kylie R. Catchpole
- Subjects
Materials science ,Radiation pressure ,business.industry ,Trap density ,Nanowire ,General Physics and Astronomy ,Optoelectronics ,Trapping ,Multijunction photovoltaic cell ,Diffusion (business) ,business ,Deposition (law) - Abstract
In this paper we quantify the constraints and opportunities for radial junction nanowire solar cells, compared to single junction and multijunction solar cells, when light trapping is included. Both nanowire and multijunction designs are reliant on a very low level of traps in the junction region, and without this, single junction designs are optimal. If low trap density at the junction can be achieved, multijunction cells lead to higher efficiencies than nanowire cells for a given diffusion length, except in the case of submicron diffusion lengths. Thus the radial junction structure is not in itself an advantage in general, though if nanowires allow faster deposition or better light trapping than other structures they could still prove advantageous.
- Published
- 2011
47. Analytical approach for design of blazed dielectric gratings for light trapping in solar cells
- Author
-
Kylie R. Catchpole, Sudha Mokkapati, and Fiona J. Beck
- Subjects
Physics ,Diffraction ,Acoustics and Ultrasonics ,Mathematical model ,business.industry ,Scalar (mathematics) ,Finite-difference time-domain method ,Physics::Optics ,Trapping ,Dielectric ,Condensed Matter Physics ,Surfaces, Coatings and Films ,Electronic, Optical and Magnetic Materials ,Optics ,business ,Diffraction grating ,Modelling software - Abstract
An analytical approach based on the scalar diffraction theory is presented for design of blazed diffraction gratings for maximizing the light trapping in solar cells. The model provides a conceptual insight into the behaviour of blazed structures. The predictions of the analytical model are checked against numerical results obtained using the commercial FDTD modelling software. Within the limits of the scalar diffraction theory, this analytical approach can be used to design gratings with arbitrary shapes.
- Published
- 2011
48. Asymmetry in photocurrent enhancement by plasmonic nanoparticle arrays located on the front or on the rear of solar cells
- Author
-
Sudha Mokkapati, Fiona J. Beck, Kylie R. Catchpole, and Albert Polman
- Subjects
Photocurrent ,Materials science ,Physics and Astronomy (miscellaneous) ,Silicon ,Field (physics) ,Scattering ,business.industry ,media_common.quotation_subject ,digestive, oral, and skin physiology ,Nanoparticle ,chemistry.chemical_element ,Asymmetry ,chemistry ,Electric field ,Optoelectronics ,business ,Plasmon ,media_common - Abstract
We show experimentally that there is asymmetry in photocurrent enhancement by Ag nanoparticle arrays located on the front or on the rear of solar cells. The scattering cross-section calculated for front- and rear-located nanoparticles can differ by up to a factor of 3.7, but the coupling efficiency remains the same. We attribute this to differences in the electric field strength and show that the normalized scattering cross-section of a front-located nanoparticle varies from two to eight depending on the intensity of the driving field. In addition, the scattering cross-section of rear-located particles can be increased fourfold using ultrathin spacer layers.
- Published
- 2010
49. Designing periodic arrays of metal nanoparticles for light-trapping applications in solar cells
- Author
-
Albert Polman, Sudha Mokkapati, Fiona J. Beck, and Kylie R. Catchpole
- Subjects
Scattering cross-section ,Materials science ,Physics and Astronomy (miscellaneous) ,Silicon ,business.industry ,chemistry.chemical_element ,Nanoparticle ,Trapping ,Long wavelength ,Optics ,chemistry ,business ,Metal nanoparticles ,Diffraction grating ,Joint (geology) - Abstract
The authors acknowledge the A. R. C. and NOW for research conducted at the FOM as a part of the Joint Solar Programme for financial support.
- Published
- 2009
50. Selective Area Epitaxy of Quantum Dots and Comparison with Other Intermixing Techniques for Optoelectronic Integration
- Author
-
Sudha Mokkapati, Jennifer Wong-Leung, Chennupati Jagadish, and Hark Hoe Tan
- Abstract
not Available.
- Published
- 2008
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.