Search

Singlet oxygen is a powerful oxidant used in various applications, such as organic synthesis, medicine, and environmental remediation. Organic and inorganic photosensitizers are commonly used to generate this reactive species through energy transfer with the triplet ground state of oxygen. We describe here a series of novel benzophenazine derivatives as a promising class of photosensitizers for singlet oxygen photosensitization. In this study, we investigated the structure-activity relationship of these benzophenazine derivatives. Akin to a molecular compass, the southern fragment was first functionalized with either aromatic tertiary amines, alkyl tertiary amines, aromatic sulfur groups, alkyl sulfur groups, or cyclic ethers. Enhanced photophysical properties (in terms of triplet excited-state lifetime, absorption wavelength, triplet state energy, and O 2 quenching capabilities) were obtained with cyclic ether and sulfur groups. Conversely, the presence of an amine moiety was detrimental to the photocatalysts. The western and northern fragments were also investigated and slightly undesirable to negligible changes in photophysical properties were observed. The most promising candidate was then immobilized on silica nanoparticles and its photoactivity was evaluated in the citronellol photooxidation reaction. A high NMR yield of 97 % in desired product was obtained, with only a slight decrease over several recycling runs (85 % in the fourth run). These results provide insights into the design of efficient photosensitizers for singlet oxygen generation and the development of heterogeneous systems., (© 2024 Wiley-VCH GmbH.)

Earth-abundant photosensitizers are highly sought after for light-mediated applications, such as photoredox catalysis, depollution and energy conversion schemes. Homoleptic and heteroleptic copper(I) complexes are promising candidates in this field, as copper is abundant and the corresponding complexes are easily obtained in smooth conditions. However, some heteroleptic copper(I) complexes suffer from low (photo)stability that leads to the gradual formation of the corresponding homoleptic complex. Such degradation pathways are detrimental, especially when recyclability is desired. This study reports a novel approach for the heterogenization of homoleptic and heteroleptic Cu complexes on silica nanoparticles. In both cases, the photophysical properties upon surface immobilization were only slightly affected. Excited-state quenching with aryl diazonium derivatives occurred efficiently (10 8 -10 10  M -1  s -1 ) with heterogeneous and homogeneous photosensitizers. Moderate but almost identical yields were obtained for the α-arylation of enol acetate using the homoleptic complex in homogeneous or heterogeneous conditions. Importantly, the silica-supported photocatalysts were recycled with moderate loss in photoactivity over multiple experiments. Transient absorption spectroscopy confirmed that excited-state electron transfer occurred from the homogeneous and heterogeneous homoleptic copper(I) complexes to aryl diazonium derivatives, generating the corresponding copper(II) center that persisted for several hundreds of microseconds, compatible with photoredox catalysis applications., (© 2023 Wiley-VCH GmbH.)

Processes leading to enantiomerically pure compounds are of utmost importance, in particular for the pharmaceutical industry. Starting from a racemic mixture, crystallization-induced diastereomeric transformation allows in theory for 100 % transformation of the desired enantiomer. However, this method has the inherent limiting requirement for the organic compound to form a salt. Herein, this limitation is lifted by introducing cocrystallization in the context of thermodynamic deracemization, with the process applied to a model chiral fungicide. We report a new general single thermodynamic deracemization process based on cocrystallization for the deracemization of (R,S)-4,4-dimethyl-1-(4-fluorophenyl)-2-(1H-1,2,4-triazol-1-yl)pentan-3-one. This study demonstrates the feasibility of this novel approach and paves the way to further development of such processes., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The encapsulation of copper inside a cyclodextrin capped with an N-heterocyclic carbene (ICyD) allowed both to catch the elusive monomeric (L)CuH and a cavity-controlled chemoselective copper-catalyzed hydrosilylation of α,β-unsaturated ketones. Remarkably, (α-ICyD)CuCl promoted the 1,2-addition exclusively, while (β-ICyD)CuCl produced the fully reduced product. The chemoselectivity is controlled by the size of the cavity and weak interactions between the substrate and internal C-H bonds of the cyclodextrin., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Poly(amidoamine) dendrimers grafted on carbon nanotubes have been appended with iron(II)-α-keto acid (benzoylformate) complex of polypyridyl ligand to design artificial non-heme oxygenase model. This nano-enzyme was applied for selective catalytic oxidation of organic molecules. Although the carbon nanotubes serve as a robust heterogeneous platform, the amine terminals of dendrimers provide catalysts binding sites and the amide bonds provide a necessary second coordination sphere similar to the enzymatic polypeptide chains. Such a hybrid design prevented the deactivation of the primary active sites leading to 8 times faster oxidative decarboxylation rates than those of its homogeneous analogue. An electrophilic iron(IV)-oxo intermediate has been intercepted, which catalyzes the selective oxidation of alcohols to aldehydes and incorporates single oxygen atoms into sulfides and olefins by using aerial oxygen with multiple turnover numbers. The catalyst was consecutively regenerated three times by mild chemical treatment and showed negligible loss of activity., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Enantioselective synthesis of synthetically significant (α-hydroxyallyl)silanes, (α-hydroxyaryl)silanes, and (α-hydroxyalkyl)silanes is reported. The present copper-catalyzed 1,2-selective hydroborylation of acylsilanes affords the aforementioned products in high yields and with high enantiomeric excesses. This robust and scalable additive-free catalytic system relies on the use of low copper(II) acetate and diphosphine ligand loadings at room temperature in the presence of a commercially available and bench-stable hydride source., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The chemical functionalization of carbon nanotubes is often a prerequisite prior to their use in various applications. The covalent grafting of 4,4,5,5-tetramethyl-1,3,2-dioxaborolane (BPin) functional groups directly on the surface of multi- and single-walled carbon nanotubes, activated by nucleophilic addition of nBuLi, was carried out. Thermogravimetric analysis (TGA) coupled with mass spectrometry, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ions mass spectrometry (ToF-SIMS) confirmed the efficiency of this methodology and proved the integrity and covalent grafting of the BPin functional groups. These groups were further reacted with various nucleophiles in the presence of a copper(II) source in the conditions of the aerobic Chan-Lam-Evans coupling. The resulting materials were characterized by TGA, XPS and ToF-SIMS. This route is efficient, reliable and among the scarce reactions that enable the direct grafting of heteroatoms at carbonaceous material surfaces., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Polyamidoamine (PAMAM) dendrimers were covalently immobilized on multi-walled carbon nanotubes (MWNT) by two "grafting to" strategies. We demonstrate the existence of non-covalent interactions between the two components but outline the superiority of our two grafting approaches, namely xanthate and click chemistry. MWNT surfaces were functionalized with activated ester and propargylic moieties prior to their reaction with PAMAM or azido-PAMAM dendrimers, respectively. The grafting of PAMAM generations 0 to 3 was evaluated with X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), and transmission electron microscopy (TEM). The versatility of our hybrids was demonstrated by post-functionalization sequences involving copper alkyne-azide cycloaddition (CuAAC). We synthesized homogeneous supported iridium complexes at the extremities of the dendrimers. In addition, our materials were used as templates for the encapsulation of Pd nanoparticles (NPs), validating our nanocomposites for catalytic applications. The palladium-based catalyst was active for carbonylative coupling over five consecutive runs without loss of activity., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Herein, we report the copper-catalyzed domino borylation/aldolisation of methyl 2-fluoroacrylate with carbonyl compounds followed by an elimination to give Morita-Baylis-Hillman (MBH) analogues. The optimal conditions described were shown to be compatible with a wide range of aldehydes and ketones. Unprecedented MBH adducts derived from ketones were efficiently synthesized., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We describe a simple and general method for the preparation and molecular engineering of supported trifunctional catalysts and their application in the representative Cu/TEMPO/NMI-catalyzed aerobic oxidation of benzyl alcohol. The methodology allows in one single step to immobilize, with precise control of surface composition, both pyta, Cu(I) , TEMPO, and NMI sites on azide-functionalized silica particles. To optimize the performance of the heterogeneous trifunctional catalysts, synergistic interactions are finely engineered through modulating the degree of freedom of the imidazole site as well as tuning the relative surface composition, leading to catalysts with an activity significantly superior to the corresponding homogeneous catalytic system., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Radical functionalization of reduced graphene oxide has been achieved by reaction with a xanthate in the presence of peroxide as a radical initiator. X-ray photoelectron spectroscopy, bulk elemental analyses, and thermogravimetric analyses showed that the xanthate grafting is covalent and efficient. The synthesis and use of seven xanthates and three peroxides showed that the highest grafting yield is obtained when xanthate and peroxide are introduced in stoichiometric amounts. It also revealed that the peroxide used as radical initiator is grafted at the graphenic surface during the functionalization. The method presented in this contribution therefore allows bifunctionalized reduced graphene oxide samples to be easily obtained in one single step. This method leads to undamaged graphene sheets with higher dispersibility than the pristine sample., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We report herein a versatile cooperative dual catalysis reaction based on a Cu(I)/Pd(0) system. Mechanistic investigation shows that every component plays a crucial role in determining the reaction outcome. The reaction is successfully extended to various substrates; such as α,β-unsaturated ketones, malonates and coumarins. The strategy tolerates different substitution patterns and affords good yields for each family of substrates., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This paper describes a tunable and stereoselective dual catalytic system that uses copper and palladium reagents. This cooperative silylcupration and palladium-catalyzed allylation readily affords trisubstituted alkenylsilanes. Fine-tuning the reaction conditions allows selective access to one stereoisomer over the other. This new methodology tolerates different substituents on both coupling partners with high levels of stereoselectivity. The one-pot reaction involving a Cu(I)/Pd(0) cooperative dual catalyst directly addresses the need to develop more time-efficient and less-wasteful synthetic pathways., (Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A new pyrene-tagged gold(I) complex has been synthesised and tested as a homogeneous catalyst. First, a simple 1,6-enyne was chosen as a model substrate for cyclisation by using different solvents to optimise the reaction conditions. The non-covalent immobilisation of our pyrene-tagged gold complex onto multi-walled carbon nanotubes through π-π stacking interactions was then explored to obtain a supported homogeneous catalyst. The heterogenised catalyst and its homogeneous counterpart exhibited similar activity in a range of enyne cyclisation reactions. Bearing in mind that π-π interactions are affected by temperature and solvent polarity, the reuse and robustness of the supported homogeneous catalyst was tested to explore the scope and limitations of the recyclability of this catalyst. Under the optimised conditions, recyclability was observed by using the concept of the boomerang effect., (Copyright © 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim.)

Radical-initiated support: Xanthates were used as chemical reagents for the sidewall covalent functionalization of carbon nanotubes (see figure). The best grafting yields were obtained with stoichiometric ratios of xanthate and the radical initiator lauroyl peroxide. One grafted function was used as a tether for bimetallic cluster compounds, which were converted into very small (1-2 nm) supported nanoparticles upon heating., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Polymer brushes (PBs) have been used as supports for the immobilization of palladium complexes on silicon surfaces. The polymers were grown by surface-initiated atom-transfer radical polymerization (SI-ATRP) and postdecorated with dipyridylamine (dpa) ligands. The pendant dpa units were in turn complexed with [Pd(OAc)(2)] to afford hybrid catalytic surfaces. A series of catalytic samples of various thicknesses (ca. 20-160 nm) and associated palladium loadings (ca. 10-45 nmol  cm(-2)) were obtained by adjusting the SI-ATRP reaction time and characterized by ellipsometry, X-ray reflectivity, X-ray photoelectron spectroscopy, and inductively coupled plasma mass spectrometry (ICP-MS). ICP-MS revealed a near-linear relationship between thickness of the polymer brush and palladium content, which confirmed the robustness of the preparation and postmodification sequence presented herein, rendering possible the creation of functional architectures with predefined catalytic potential. The activities of the catalytic PBs were determined by systematically exploring a full range of substrate-to-catalyst ratios in a model palladium(0)-catalyzed reaction. Quantitative transformations were observed for loadings down to 0.03 mol % and a maximum turnover number (TON) of around 3500 was established for the system. Comparison of the catalytic performances evidenced a singular influence of the thickness on conversions and TONs. The limited recyclability of the hairy catalysts has been attributed to palladium leaching., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Catalytic surfaces have been prepared by complexation of palladium on self-assembled terpyridine monolayers on silicon. A reaction-based fluorogenic probe was developed to allow facile visualization of the catalytic potential of the surface. Superior activity of the immobilized catalyst compared with the homogeneous control reactions is demonstrated., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

To be or not to bifluoride: Two synthetic pathways to unprecedented N-heterocyclic carbene copper(I) bifluoride complexes have been developed. Catalytic tests demonstrated that copper(I) bifluorides are very efficient catalysts, which do not require any additional activating agent. The first Cu-catalyzed diastereoselective allylation of (R)-N-tert-butanesulfinyl aldimines was also established. The method enables efficient, simple and general synthesis of enantiomerically enriched homoallylic amines at room temperature in high yields., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A library of catalysts was designed for asymmetric-hydrogen transfer to acetophenone. At first, the whole library was submitted to evaluation using high-throughput experiments (HTE). The catalysts were listed in ascending order, with respect to their performance, and best catalysts were identified. In the second step, various simulated evolution experiments, based on a genetic algorithm, were applied to this library. A small part of the library, called the mother generation (G0), thus evolved from generation to generation. The goal was to use our collection of HTE data to adjust the parameters of the genetic algorithm, in order to obtain a maximum of the best catalysts within a minimal number of generations. It was namely found that simulated evolution's results depended on the selection of G0 and that a random G0 should be preferred. We also demonstrated that it was possible to get 5 to 6 of the ten best catalysts while investigating only 10 % of the library. Moreover, we developed a double algorithm making this result still achievable if the evolution started with one of the worst G0.