Search

Substrate specificities of glycoside hydrolase families 8 (Rex), 39 (BhXyl39), and 52 (BhXyl52) β-xylosidases from Bacillus halodurans C-125 were investigated. BhXyl39 hydrolyzed xylotriose most efficiently among the linear xylooligosaccharides. The activity decreased in the order of xylohexaose > xylopentaose > xylotetraose and it had little effect on xylobiose. In contrast, BhXyl52 hydrolyzed xylobiose and xylotriose most efficiently, and its activity decreased when the main chain became longer as follows: xylotetraose > xylopentaose > xylohexaose. Rex produced O-β-D-xylopyranosyl-(1 → 4)-[O-α-L-arabinofuranosyl-(1 → 3)]-O-β-D-xylopyranosyl-(1 → 4)-β-D-xylopyranose (Ara2Xyl3) and O-β-D-xylopyranosyl-(1 → 4)-[O-4-O-methyl-α-D-glucuronopyranosyl-(l → 2)]-β-D-xylopyranosyl-(1 → 4)-β-D-xylopyranose (MeGlcA2Xyl3), which lost a xylose residue from the reducing end of O-β-D-xylopyranosyl-(1 → 4)-[O-α-L-arabinofuranosyl-(1 → 3)]-O-β-D-xylopyranosyl-(1 → 4)-β-D-xylopyranosyl-(1 → 4)-β-D-xylopyranose (Ara3Xyl4) and O-β-D-xylopyranosyl-(1 → 4)-[O-4-O-methyl-α-D-glucuronopyranosyl-(1 → 2)]-β-D-xylopyranosyl-(1 → 4)-β-D-xylopyranosyl-(1 → 4)-β-D-xylopyranose (MeGlcA3Xyl4). It was considered that there is no space to accommodate side chains at subsite −1. BhXyl39 rapidly hydrolyzes the non-reducing-end xylose linkages of MeGlcA3Xyl4, while the arabinose branch does not significantly affect the enzyme activity because it degrades Ara3Xyl4 as rapidly as unmodified xylotetraose. The model structure suggested that BhXyl39 enhanced the activity for MeGlcA3Xyl4 by forming a hydrogen bond between glucuronic acid and Lys265. BhXyl52 did not hydrolyze Ara3Xyl4 and MeGlcA3Xyl4 because it has a narrow substrate binding pocket and 2- and 3-hydroxyl groups of xylose at subsite +1 hydrogen bond to the enzyme.

The modified medium composed of the alkaline-pretreated oil palm empty fruit bunch (APEFB) and tuna condensate powder was used for cellulase and xylanase productions by Streptomyces thermocoprophilus strain TC13W. The APEFB contained 74.46% (w/w) cellulose, 15.72% (w/w) hemicellulose, and 6.40% (w/w) lignin. The tuna condensate powder contained 55.49% (w/w) protein and 11.05% (w/w) salt. In the modified medium with only 6.75 g/l tuna condensate powder, 10 g/l APEFB, and 0.5 g/l Tween 80, S. thermocoprophilus strain TC13W produced cellulase 4.9 U/ml and xylanase 9.0 U/ml. The enzyme productions in the modified medium were lower than cellulase (6.0 U/ml) and xylanase (12.0 U/ml) productions in the complex medium (CaCl2 0.1, MgSO4·7H2O 0.1, KH2PO4 0.5, K2HPO4 1.0, NaCl 0.2, yeast extract 5.0, NH4NO3 1.0, Tween 80 0.5). When tuna condensate powder in the modified medium was reduced to 5.0 g/l and Tween 80 was increased to 1.5 g/l, S. thermocoprophilus strain TC13W produced cellulase and xylanase activities of 9.1 and 12.1 U/ml, respectively. This study shows that the cost of enzyme production could be reduced by using pretreated EFB and tuna condensate as a carbon and a nitrogen source, respectively.

The secretomes of the strain Cellulosimicrobium cellulans F16 grown on different carbon sources were analyzed by zymography, and the subcellular surface structures were extensively studied by electron microscope. The exo-cellulase and xylanase systems were sparse when cells were grown on soluble oligosaccharides, but were significantly increased when grown on complex and water-insoluble polysaccharides, such as Avicel, corn cob, and birchwood xylan. The cellulosome-like protuberant structures were clearly observed on the cell surfaces of strain F16 grown on cellulose, with diameters of 15-20 nm. Fibrous structures that connected the adjacent cells can be seen under microscope. Moreover, protuberances that adsorbed the cell to cellulose were also observed. As the adhesion of Cellulosimicrobium cellulans cells onto cellulose surfaces occurs via thick bacterial curdlan-type exopolysaccharides (EPS), such surface layer is potentially important in the digestion of insoluble substrates such as cellulose or hemicellulose, and the previously reported xylanosomes are part of such complex glycocalyx layer on the surface of the bacterial cell.

To explore the diversity of glycoside hydrolase family 10 xylanase genes in the sediment of soda lake Dabusu by using high-throughput amplicon sequencing based on the Illumina HiSeq2500 platform. A total of 227,420 clean reads, representing approximately 49.5 M bp, were obtained. Operational taxonomic unit (OTU) classification, with a 95% sequence identity cut-off, resulted in 467 OTUs with 392 annotated as GH10 xylanase, exhibiting 35–99% protein sequence identity with their closest-related xylanases in GenBank. Above 75% of the total OTUs demonstrated less than 80% identity with known xylanases. In addition, xylanases derived from the sediment were found to be affiliated to 12 different phyla, with Bacteroidetes, Proteobacteria, Actinobacteria, Firmicutes, Verrucomicrobia, and Basidiomycota being the dominant phyla. Moreover, barcode sequence had a major effect on abundance with only a minor effect on diversity. High-throughput amplicon sequencing offers insight into xylanase gene diversity at a substantially higher resolution and lesser cost than library cloning and Sanger sequencing, facilitating a more thorough understanding of xylanase distribution and ecology.

Background Lignin in sugarcane bagasse (SB) hinders its utilization by microorganism, therefore, pretreatment methods are employed to make fermentable components accessible to the microbes. Multivariate analysis of different chemical pretreatment methods can aid to select the most appropriate strategy to valorize a particular biomass. Results Amongst methods tested, the pretreatment by using sodium hydroxide in combination with methyltrioctylammonium chloride, an ionic liquid, (NaOH+IL) was the most significant for xylanase production by Bacillus aestuarii UE25. Investigation of optimal levels of five significant variables by adopting Box-Behnken design (BBD) predicted 20 IU mL− 1 of xylanase and experimentally, a titer of 17.77 IU mL− 1 was obtained which indicated the validity of the model. The production kinetics showed that volumetric productivity of xylanase was much higher after 24 h (833.33 IU L− 1 h− 1) than after 48 h (567.08 IU L− 1 h− 1). The extracted xylan from SB induced more xylanase in the fermentation medium than pretreated SB or commercially purified xylan. Nuclear Magnetic Resonance, Fourier transform infrared spectroscopy and scanning electron microscopy of SB indicated removal of lignin and changes in the structure of SB after NaOH+IL pretreatment and fermentation. Conclusion Combined pretreatment of SB with alkali and methyltrioctylammonium chloride appeared better than other chemical methods for bacterial xylanase production and for the extraction of xylan form SB.

Gut microbiota participates in diverse metabolic and homeostatic functions related to health and well-being. Its composition varies between individuals, and depends on factors related to host and microbial communities, which need to adapt to utilize various nutrients present in gut environment. We profiled fecal microbiota in 63 healthy adult individuals using metaproteomics, and focused on microbial CAZy (carbohydrate-active) enzymes involved in glycan foraging. We identified two distinct CAZy profiles, one with many Bacteroides-derived CAZy in more than one-third of subjects (n = 25), and it associated with high abundance of Bacteroides in most subjects. In a smaller subset of donors (n = 8) with dietary parameters similar to others, microbiota showed intense expression of Prevotella-derived CAZy including exo-beta-(1,4)-xylanase, xylan-1,4-beta-xylosidase, alpha-l-arabinofuranosidase and several other CAZy belonging to glycosyl hydrolase families involved in digestion of complex plant-derived polysaccharides. This associated invariably with high abundance of Prevotella in gut microbiota, while in subjects with lower abundance of Prevotella, microbiota showed no Prevotella-derived CAZy. Identification of Bacteroides- and Prevotella-derived CAZy in microbiota proteome and their association with differences in microbiota composition are in evidence of individual variation in metabolic specialization of gut microbes affecting their colonizing competence.

LXYL-P1-2 is one of the few xylosidases that efficiently catalyze the reaction from 7-β-xylosyl-10-deacetyltaxol (XDT) to 10-deacetyltaxol (DT), and is a potential enzyme used in Taxol industrial production. Here we report the crystal structure of LXYL-P1-2 and its XDT binding complex. These structures reveal an enzyme/product complex with the sugar conformation different from the enzyme/substrate complex reported previously in GH3 enzymes, even in the whole glycohydrolases family. In addition, the DT binding pocket is identified as the structural basis for the substrate specificity. Further structure analysis reveals common features in LXYL-P1-2 and Taxol binding protein tubulin, which might provide useful information for designing new Taxol carrier proteins for drug delivery., Yang, Chen et al. report crystallographic structures of GH3 beta-glucosidase LXYL-P1-2 that converts XDT into DT, a precursor for an anticancer drug taxol, and the complex of LXYL-P1-2 with XDT. This study provides insight into the catalytic mechanism for GH3 enzymes.

Two new endo-1,4-beta-xylanases encoding genes EpXyn1 and EpXyn3 were isolated from mesophilic fungus Eupenicillium parvum 4–14. Based on analysis of catalytic domain and phylogenetic trees, the xylanases EpXYN1 (404 aa) and EpXYN3 (220 aa) belong to glycoside hydrolase (GH) family 10 and 11, respectively. Both EpXYN1 and EpXYN3 were successfully expressed in Pichia pastoris and the recombinant enzymes were characterized using beechwood xylan, birchwood xylan, or oat spelt xylan as substrates, respectively. The optimum temperatures and pH values were 75 °C and 5.5 for EpXYN1, and 55 °C and 5.0 for EpXYN3. EpXYN1 exhibited a high stability at high temperature (65 °C) or at pH values from 8 to 10. EpXYN3 kept over 80% enzymatic activity after treatment at pH values from 3 to 10. The specific activities of EpXYN1 and EpXYN3 were 384.42 and 214.20 U/mg using beechwood xylan as substrate, respectively. EpXYN1 showed lower Km values and higher specific activities toward different xylans compared to EpXYN3. Thin-layer chromatography analysis indicated that the hydrolysis profiles of xylans or xylo-oligosacharides were different by EpXYN1and EpXYN3. EpXYN3 had a higher efficiency than EpXYN1 in production of feruloylated oligosaccharides (FOs) from de-starched wheat bran. The maximum levels of FOs released by EpXYN1 and EpXYN3 were 11.1 and 14.4 μmol/g, respectively. In conclusion, the two xylanases are potential candidates for various industrial applications.

A locally isolated strain of Aspergillus niger van Tieghem was found to produce thermostable β-xylosidase activity. The enzyme was purified by cation and anion exchange and hydrophobic interaction chromatography. Maximum activity was observed at 70-75 °C and pH 4.5. The enzyme was found to be thermostable retaining 91 and 87% of its original activity after incubation for 72 h at 60 and 65 °C, respectively, with 52% residual activity detected after 18 h at 70 °C. Available data indicates that the purified β-xylosidase is more thermostable over industrially relevant prolonged periods at high temperature than those reported from other A. niger strains. Maximum activity was observed on p-nitrophenyl-β-D-xylopyranoside and the enzyme also hydrolysed p-nitrophenyl β-D-glucopyranoside and p-nitrophenyl α-L-arabinofuranoside. The purified enzyme acted synergistically with A. niger endo-1,4-β-xylanase in the hydrolysis of beechwood xylan at 65 °C. During hydrolysis of pretreated straw lignocellulose at 70 °C using a commercial lignocellulosic enzyme cocktail, inclusion of the purified enzyme resulted in a 19-fold increase in the amount of xylose produced after 6 h. The results observed indicate potential suitability for industrial application in the production of lignocellulosic bioethanol where thermostable β-xylosidase activity is of growing interest to maximise the enzymatic hydrolysis of lignocellulose.

Efficient hydrolysis of holocellulose depends on a proper balance between cellulase (endoglucanase, exoglucanase, β-glucosidase) and xylanase activities. The present study aimed to induce the production of cellulases and xylanases using liquid cultures (one, two, three, and four fungal strains on the same bioreactor) of wild strains of Trichoderma harzianum, Aspergillus niger, and Fusarium oxysporum. The strains were identified by amplification and analysis of the ITS rDNA region and the obtained sequences were deposited in Genbank. Enzymes (endoglucanase, exoglucansae, β-glucosidase, and xylanase activities) and the profile of extracellular protein isoforms (SDS-PAGE) produced by different fungal combinations (N = 14) were analyzed by Pearson's correlation matrix and principal component analysis (PCA). According to our results, induction of endoglucanase (19.02%) and β-glucosidase (6.35%) were obtained after 4 days when A. niger and F. oxysporum were cocultured. The combination of A. niger-T. harzianum produced higher endoglucanase in a shorter time than monocultures. On the contrary, when more than two strains were cultured in the same reactor, the relationships of competition were established, trending to diminish the amount of enzymes and the extracellular protein isoforms produced. The xylanase production was sensible to stress produced by mixed cultures, decreasing their activity. This is important when the aim is to produce cellulase-free xylanase. In addition, exoglucanase activity did not change in the combinations tested.

The enzymatic deconstruction of structural polysaccharides, which relies on the production of specific glycoside hydrolases (GHs), is an essential process across environments. Over the past few decades, researchers studying the diversity and evolution of these enzymes have isolated and biochemically characterized thousands of these proteins. The carbohydrate-active enzymes database (CAZy) lists these proteins and provides some metadata. Here, the sequences and metadata of characterized sequences derived from GH families associated with the deconstruction of cellulose, xylan, and chitin were collected and discussed. First, although few polyspecific enzymes are identified, characterized GH families are mostly monospecific. Next, the taxonomic distribution of characterized GH mirrors the distribution of identified sequences in sequenced genomes. This provides a rationale for connecting the identification of GH sequences to specific reactions or lineages. Finally, we tested the annotation of the characterized GHs using HMM scan and the protein families database (Pfam). The vast majority of GHs targeting cellulose, xylan, and chitin can be identified using this publicly accessible approach.

A gene encoding glycoside hydrolase family 11 xylanase (HoXyn11B) from Hypocrea orientalis EU7-22 was expressed in Pichia pastoris with a high activity (413 IU/ml). HoXyn11B was partly N-glycosylated and appeared two protein bands (19-29 kDa) on SDS-PAGE. The recombinant enzyme exhibited optimal activity at pH 4.5 and 55 °C, and retained more than 90% of the original activity after incubation at 50 °C for 60 min. The determined apparent K m and V max values using beechwood xylan were 10.43 mg/ml and 3246.75 IU/mg, respectively. The modes of action of recombinant HoXyn11B on xylo-oligosaccharides (XOSs) and beechwood xylan were investigated by thin-layer chromatography (TLC), high-performance liquid chromatography (HPLC), and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS), which indicated that the modes of action of HoXyn11B are different from HoXyn11A since it is able to release a significant amount of xylose from various substrates. This study provides an opportunity to better understand the hydrolysis mechanisms of xylan by xylanases from Trichoderma.

Lignocellulosic biomass from various types of wood has become a renewable resource for production of biofuels and biobased chemicals. Because xylan is the major component of wood hemicelluloses, highly efficient enzymes to enhance xylan hydrolysis can improve the use of lignocellulosic biomass. In this study, a xylanolytic gene cluster was identified from the crude oil-degrading thermophilic strain Geobacillus thermodenitrificans NG80-2. The enzymes involved in xylan hydrolysis, which include two xylanases (XynA1, XynA2), three β-xylosidases (XynB1, XynB2, XynB3), and one α-L-arabinofuranosidase (AbfA), have many unique features, such as high pH tolerance, high thermostability, and a broad substrate range. The three β-xylosidases were highly resistant to inhibition by product (xylose) accumulation. Moreover, the combination of xylanase, β-xylosidase, and α-L-arabinofuranosidase exhibited the largest synergistic action on xylan degradation (XynA2, XynB1, and AbfA on oat spelt or beechwood xylan; XynA2, XynB3, and AbfA on birchwood xylan). We have demonstrated that the proposed enzymatic cocktail almost completely converts complex xylan to xylose and arabinofuranose and has great potential for use in the conversion of plant biomass into biofuels and biochemicals.

Cycloastragenol (CA), an exclusive telomerase activator, was derived from the Astragali Radix which is widely distributed in Turkey. Until now, there is no report to produce CA with effective and environment-friendly methods. Biotransformation is considered to be a promising technology. Thus, the present study was aimed to establish a biotransformation technology that could efficiently produce CA. In this paper, a microorganism, LG-502, was used to successfully transform astragaloside IV (ASI) to CA by analysis of thin layer chromatography (TLC) and high-performance liquid chromatography (HPLC). The phylogenetic analysis of the 16S rRNA indicated that this strain belongs to Bacillus sp. Three metabolites were separated during the fermentation and characterized to be cyclogaleginoside B, CA, and 20R, 24S-epoxy-6α, 16β, 25-trihydroxy-9, 19-cycloartan-3-one based on NMR and MS spectroscopic analyses. The conversion rate of ASI and yield rate of CA were achieved as high as 89 and 84%, respectively, under optimized conditions. Enzymatic analysis showed that the glycosidases were mainly located inside the bacterial body, and the activities of glucosidases were much higher than the xylosidases under the experimental conditions. This study provides a feasible, effective, and eco-friendly way to prepare CA from ASI, which might greatly contribute to the applications of ASI.

A xylanase gene (TrXyn10) from Thermoactinospora rubra YIM 77501T was cloned and expressed in Escherichia coli. The amino acid sequence displayed 78% homology with Microbispora mesophila xylanase (WP_062413927.1). The recombinant xylanase (TrXyn10), with MW 46.1 kDa, could hydrolyse beechwood, birchwood and oatspelt xylan. Based on the sequence, enzymatic properties and tertiary structure of the protein, TrXyn10 belongs to glycoside hydrolase family 10 (GH10). The optimal pH and temperature for the recombinant enzyme were determined to be 7.0 and 55 °C, respectively. TrXyn10 was stable over a wide pH range, and it retained more than 45% of the total activity at pH 6.0–12.0 for 12 h. In addition, the activity was greatly promoted, by approximately 200% of the initial activity, after incubation at pH 6.0 and 7.0 for 12 h. Based on enzymatic properties and product analysis, we showed that TrXyn10 is a neutral endoxylanase.

The thermostable bifunctional CMCase and xylanase encoding gene (rBhcell-xyl) from Bacillus halodurans TSLV1 has been expressed in Escherichia coli. The recombinant E. coli produced rBhcell-xyl (CMCase 2272 and 910 U L−1 xylanase). The rBhcell-xyl is a ~62-kDa monomeric protein with temperature and pH optima of 60 °C and 6.0 with T1/2 of 7.0 and 3.5 h at 80 °C for CMCase and xylanase, respectively. The apparent K m values (CMC and Birchwood xylan) are 3.8 and 3.2 mg mL−1. The catalytic efficiency (k cat/K m ) values of xylanase and CMCase are 657 and 171 mL mg−1 min−1, respectively. End-product analysis confirmed that rBhcell-xyl is a unique endo-acting enzyme with exoglucanase activity. The rBhcell-xyl is a GH5 family enzyme possessing single catalytic module and carbohydrate binding module. The action of rBhcell-xyl on corn cobs and wheat bran liberated reducing sugars, which can be fermented to bioethanol and fine biochemicals.

The objective was to phylogenetically classify diverse strains of Aureobasidium pullulans and determine their production of feruloyl esterase. Seventeen strains from the A. pullulans literature were phylogenetically classified. Phenotypic traits of color variation and endo-β-1,4-xylanase overproduction were associated with phylogenetic clade 10 and particularly clade 8. Literature strains used for pullulan production all belonged to clade 7. These strains and 36 previously classified strains were tested for feruloyl esterase production, which was found to be associated with phylogenetic clades 4, 11, and particularly clade 8. Clade 8 strains NRRL 58552 and NRRL 62041 produced the highest levels of feruloyl esterase among strains tested. Production of both xylanase and feruloyl esterase are associated with A. pullulans strains in phylogenetic clade 8, which is thus a promising source of enzymes with potential biotechnological applications.

In the present review, we briefly summarize the biotechnological applications of microbial β-xylosidases in the processing of agro-industrial residues into fuels and chemicals and report the importance of using immobilization techniques to study the enzyme. The advantages of utilizing genes that encode β-xylosidases are readily apparent in the bioconversion of abundant, inexpensive, and renewable resources into economically important products, such as xylitol and bioethanol. We highlight recent research characterizing fungal and bacterial β-xylosidases, including the use of classical biochemical methods such as purification, heterologous recombinant protein expression, and metagenomic approaches to discovery β-xylosidases, with focus on enzyme molecular and kinetic properties. In addition, we discuss the relevance of using experimental design optimization methodologies to increase the efficacy of these enzymes for use with residual biomass. Finally, we emphasize more extensively the advances in the regulatory mechanisms governing β-xylosidase gene expression and xylose metabolism in gram-negative and gram-positive bacteria and fungi. Unlike previous reviews, this revision covers recent research concerning the various features of bacterial and fungal β-xylosidases with a greater emphasis on their biochemical characteristics and how the genes that encode these enzymes can be better exploited to obtain products of biotechnological interest via the application of different technical approaches.

With the aim of improving current ethanologenic Escherichia coli strains, we screened a metagenomic library from bovine ruminal fluid for cellulolytic enzymes. We isolated one fosmid, termed Csd4, which was able to confer to E. coli the ability to grow on complex cellulosic material as the sole carbon source such as avicel, carboxymethyl cellulose, filter paper, pretreated sugarcane bagasse, and xylan. Glucanolytic activity obtained from E. coli transformed with Csd4 was maximal at 24 h of incubation and was inhibited when glucose or xylose were present in the media. The 34,406-bp DNA fragment of Csd4 was completely sequenced, and a putative endoglucanase, a xylosidase/arabinosidase, and a laccase gene were identified. Comparison analysis revealed that Csd4 derived from an organism closely related to Prevotella ruminicola, but no homologies were found with any of the genomes already sequenced. Csd4 was introduced into the ethanologenic E. coli MS04 strain and ethanol production from CMC, avicel, sugarcane bagasse, or filter paper was observed. Exogenously expressed β-glucosidase had a positie effect on cell growth in agreement with the fact that no putative β-glucosidase was found in Csd4. Ethanol production from sugarcane bagasse was improved threefold by Csd4 after saccharification by commercial Trichoderma reesei cellulases underlining the ability of Csd4 to act as a saccharification enhancer to reduce the enzymatic load and time required for cellulose deconstruction.

In order to improve the overproduction of "difficult to express" proteins, a low-temperature expression system for Bacillus subtilis based on the cold-inducible promoter of the desaturase-encoding des gene was constructed. Selected regulatory DNA sequence elements from B. subtilis genes known to be cold-inducible were fused to different model genes. It could be demonstrated that these regulatory elements are able to mediate increased heterologous gene expression, either by improved translation efficiency or by higher messenger RNA (mRNA) stability. In case of a cold-adapted β-galactosidase from Pseudoalteromonas haloplanktis TAE79A serving as the model, significantly higher expression was achieved by fusing its coding sequence to the so-called "downstream box" sequence of cspB encoding the major B. subtilis cold-shock protein. The combination of this fusion with a cspB 5'-UTR stem-loop structure resulted in further enhancement of the β-galactosidase expression. In addition, integration of the transcription terminator of the B. subtilis cold-inducible bkd operon downstream of the target genes caused a higher mRNA stability and enabled thus a further significant increase in expression. Finally, the fully optimized expression system was validated by overproducing a B. subtilis xylanase as well as an α-glucosidase from Saccharomyces cerevisiae, the latter known for tending to form inclusion bodies. These analyses verified the applicability of the engineered expression system for extracellular and intracellular protein synthesis in B. subtilis, thereby confirming the suitability of this host organism for the overproduction of critical, poorly soluble proteins.

The cell surface display technique allows expression of target proteins or peptides on microbial cell surface by fusing an appropriate protein as an anchoring motif. Herein, we constructed an Escherichia coli-based whole-cell biocatalyst displaying Thermomyces lanuginosus DSM 5826 xylanase (XynA) on the cell surface and endowed the E. coli cells with the ability to degrade xylan. The XynA was fused in frame to the C-terminus of Lpp-OmpA fusion previously shown to direct various other heterologous proteins to E. coli cell surface. The expressed Lpp-OmpA-XynA fusion protein has a molecular weight of approximately 37 kDa, which was confirmed by SDS-PAGE and Western blot analysis. The enzyme activity of the surface-displayed xylanase showed clear halo around the colony. The XynA-displaying E. coli-based whole-cell biocatalyst xylanase activity was mainly detected with whole cells by determination of activity. The XynA-displaying E. coli-based whole-cell biocatalyst showed highest XynA activity at pH 6.2 and 65 °C, respectively. These results suggest that E. coli, which displayed the xylanase on its surface, could be used as a whole-cell biocatalyst in xylooligosaccharide production.

An extracellular thermo-alkali-stable and cellulase-free xylanase from Geobacillus thermodenitrificans A333 was purified to homogeneity by ion exchange and size exclusion chromatography. Its molecular mass was 44 kDa as estimated in native and denaturing conditions by gel filtration and SDS-PAGE analysis, respectively. The xylanase (GtXyn) exhibited maximum activity at 70 °C and pH 7.5. It was stable over broad ranges of temperature and pH retaining 88 % of activity at 60 °C and up to 97 % in the pH range 7.5-10.0 after 24 h. Moreover, the enzyme was active up to 3.0 M sodium chloride concentration, exhibiting at that value 70 % residual activity after 1 h. The presence of other metal ions did not affect the activity with the sole exceptions of K(+) that showed a stimulating effect, and Fe(2+), Co(2+) and Hg(2+), which inhibited the enzyme. The xylanase was activated by non-ionic surfactants and was stable in organic solvents remaining fully active over 24 h of incubation in 40 % ethanol at 25 °C. Furthermore, the enzyme was resistant to most of the neutral and alkaline proteases tested. The enzyme was active only on xylan, showing no marked preference towards xylans from different origins. The hydrolysis of beechwood xylan and agriculture-based biomass materials yielded xylooligosaccharides with a polymerization degree ranging from 2 to 6 units and xylobiose and xylotriose as main products. These properties indicate G. thermodenitrificans A333 xylanase as a promising candidate for several biotechnological applications, such as xylooligosaccharides preparation.

Plant cell wall degrading enzymes (PCWDEs) are a subset of carbohydrate-active enzymes (CAZy) produced by plant pathogens to degrade plant cell walls. To counteract PCWDEs, plants release PCWDEs inhibitor proteins (PIPs) to reduce their impact. Several transgenic plants expressing exogenous PIPs that interact with fungal glycoside hydrolase (GH)11-type xylanases or GH28-type polygalacturonase (PG) have been shown to enhance disease resistance. However, many plant pathogenic Fusarium species were reported to escape PIPs inhibition. Fusarium virguliforme is a soilborne pathogen that causes soybean sudden death syndrome (SDS). Although the genome of F. virguliforme was sequenced, there were limited studies focused on the PCWDEs of F. virguliforme. Our goal was to understand the genomic CAZy structure of F. viguliforme, and determine if exogenous PIPs could be theoretically used in soybean to enhance resistance against F. virguliforme.F. virguliforme produces diverse CAZy to degrade cellulose and pectin, similar to other necrotorphic and hemibiotrophic plant pathogenic fungi. However, some common CAZy of plant pathogenic fungi that catalyze hemicellulose, such as GH29, GH30, GH44, GH54, GH62, and GH67, were deficient in F. virguliforme. While the absence of these CAZy families might be complemented by other hemicellulases, F. virguliforme contained unique families including GH131, polysaccharide lyase (PL) 9, PL20, and PL22 that were not reported in other plant pathogenic fungi or oomycetes. Sequence analysis revealed two GH11 xylanases of F. virguliforme, FvXyn11A and FvXyn11B, have conserved residues that allow xylanase inhibitor protein I (XIP-I) binding. Structural modeling suggested that FvXyn11A and FvXyn11B could be blocked by XIP-I that serves as good candidate for developing transgenic soybeans. In contrast, one GH28 PG, FvPG2, contains an amino acid substitution that is potentially incompatible with the bean polygalacturonase-inhibitor protein II (PvPGIP2).Identification and annotation of CAZy provided advanced understanding of genomic composition of PCWDEs in F. virguliforme. Sequence and structural analyses of FvXyn11A and FvXyn11B suggested both xylanases were conserved in residues that allow XIP-I inhibition, and expression of both xylanases were detected during soybean roots infection. We postulate that a transgenic soybean expressing wheat XIP-I may be useful for developing root rot resistance to F. virguliforme.

An essential step in the conversion of lignocellulosic biomass to ethanol and other biorefinery products is conversion of cell wall polysaccharides into fermentable sugars by enzymatic hydrolysis. The objective of the present study was to understand the mode of action of hemicellulolytic enzyme mixtures for pretreated sugarcane bagasse (PSB) deconstruction and wheat arabinoxylan (WA) hydrolysis on target biotechnological applications. In this study, five hemicellulolytic enzymes-two endo-1,4-xylanases (GH10 and GH11), two α-L-arabinofuranosidases (GH51 and GH54), and one β-xylosidase (GH43)-were submitted to combinatorial assays using the experimental design strategy, in order to analyze synergistic and antagonistic effects of enzyme interactions on biomass degradation. The xylooligosaccharides (XOSs) released from hydrolysis were analyzed by capillary electrophoresis and quantified by high-performance anion exchange chromatography with pulsed amperometric detection (HPAEC-PAD). Based on this analysis, it was possible to define which enzymatic combinations favor xylose (X1) or XOS production and thus enable the development of target biotechnological applications. Our results demonstrate that if the objective is X1 production from WA, the best enzymatic combination is GH11 + GH54 + GH43, and for xylobiose (X2) production from WA, it is best to combine GH11 + GH51. However, if the goal is to produce XOS, the five enzymes used in WA hydrolysis are important, but for PSB hydrolysis, only GH11 is sufficient. If the final objective is bioethanol production, GH11 is responsible for hydrolyzing 64.3 % of hemicellulose from PSB. This work provides a basis for further studies on enzymatic mechanisms for XOS production, and the development of more efficient and less expensive enzymatic mixtures, targeting commercially viable lignocellulosic ethanol production and other biorefinery products.

In this study, yeasts associated with lignocellulosic materials in Brazil, including decaying wood and sugarcane bagasse, were isolated, and their ability to produce xylanolytic enzymes was investigated. A total of 358 yeast isolates were obtained, with 198 strains isolated from decaying wood and 160 strains isolated from decaying sugarcane bagasse samples. Seventy-five isolates possessed xylanase activity in solid medium and were identified as belonging to nine species: Candida intermedia, C. tropicalis, Meyerozyma guilliermondii, Scheffersomyces shehatae, Sugiyamaella smithiae, Cryptococcus diffluens, Cr. heveanensis, Cr. laurentii and Trichosporon mycotoxinivorans. Twenty-one isolates were further screened for total xylanase activity in liquid medium with xylan, and five xylanolytic yeasts were selected for further characterization, which included quantitative analysis of growth in xylan and xylose and xylanase and β-D-xylosidase activities. The yeasts showing the highest growth rate and cell density in xylan, Cr. laurentii UFMG-HB-48, Su. smithiae UFMG-HM-80.1 and Sc. shehatae UFMG-HM-9.1a, were, simultaneously, those exhibiting higher xylanase activity. Xylan induced the highest level of (extracellular) xylanase activity in Cr. laurentii UFMG-HB-48 and the highest level of (intracellular, extracellular and membrane-associated) β-D-xylosidase activity in Su. smithiae UFMG-HM-80.1. Also, significant β-D-xylosidase levels were detected in xylan-induced cultures of Cr. laurentii UFMG-HB-48 and Sc. shehatae UFMG-HM-9.1a, mainly in extracellular and intracellular spaces, respectively. Under xylose induction, Cr. laurentii UFMG-HB-48 showed the highest intracellular β-D-xylosidase activity among all the yeast tested. C. tropicalis UFMG-HB 93a showed its higher (intracellular) β-D-xylosidase activity under xylose induction and higher at 30 °C than at 50 °C. This study revealed different xylanolytic abilities and strategies in yeasts to metabolise xylan and/or its hydrolysis products (xylo-oligosaccharides and xylose). Xylanolytic yeasts are able to secrete xylanolytic enzymes mainly when induced by xylan and present different strategies (intra- and/or extracellular hydrolysis) for the metabolism of xylo-oligosaccharides. Some of the unique xylanolytic traits identified here should be further explored for their applicability in specific biotechnological processes.

The alkaline xylanase Xyn11A-LC from the alkalophilic Bacillus sp. SN5 was expressed in E. coli, purified and crystallized. The crystal structure was determined at a resolution of 1.49 A. Xyn11A-LC has the β-jelly roll structure typical of family 11 xylanases. To improve its thermostability and thermophilicity, a mutant SB3 was constructed by introducing three arginines on the different sides of the protein surface. SB3 increased the optimum temperature by 5 °C. The wild type and SB3 had the half-lives of 22 and 68 min at 65 °C at pH 8.0 (Tris/HCl buffer), respectively. CD spectroscopy revealed that the melting temperature (T m) of the wild type and SB3 were 55.3 and 66.9 °C, respectively. These results showed that the introduction of arginines enhance the thermophilicity and thermostability of Xyn11A-LC.

The filamentous fungus Talaromyces versatilis produces a wide range of cellulolytic and hemicellulolytic enzymes such as xylanases. The recent accessibility to the T. versatilis genome allows identifying two new genes, xynE and xynF, encoding glycoside-hydrolases from family GH11. Both genes were cloned and expressed in the methylotrophic yeast Pichia pastoris in order to compare these new xylanases with two other GH11 xylanases from T. versatilis (XynB and XynC) that were previously reported. High-level expression of recombinant enzymes was obtained for the four enzymes that were purified to homogeneity. The XynB, XynC, XynE and XynF enzymes have molecular masses of 34, 22, 45 and 23 kDa, an optimal pH between 3.5 and 4.5 and an optimal temperature between 50 °C and 60 °C. Interestingly, XynF has shown the best thermal stability at 50 °C for at least 180 min with a weak loss of activity. The four xylanases catalysed hydrolysis of low viscosity arabinoxylan (LVAX) with K m(app) between 11.5 and 23.0 mg.mL−1 and k cat/K m(app) 170 and 3,963 s−1 mg−1.mL. Further investigations on the rate and pattern of hydrolysis of the four enzymes on LVAX showed the predominant production of xylose, xylobiose and some (arabino)xylo-oligosaccharides as end products. The initial rate data from the hydrolysis of short xylo-oligosaccharides indicated that the catalytic efficiency increased with increasing degree of polymerisation of oligomer up to 6, suggesting that the specificity region of XynE and XynF spans at least six xylose residues. Because of their attractive properties, T. versatilis xylanases might be considered for biotechnological applications.

A xylanase gene (xyn2) from Trichoderma reesei ATCC 58350 was previously cloned and expressed in Kluyveromyces lactis GG799. The production of the recombinant xylanase was conducted in a developed medium with an optimised batch and with fed-batches that were processed with glucose. The glucose served as a carbon source for cell growth and as an inducer for xylanase production. In a 1-L batch system, a glucose concentration of 20 g L(-1) and 80 % dissolved oxygen were found to provide the best conditions for the tested ranges. A xylanase activity of 75.53 U mL(-1) was obtained. However, in the batch mode, glucose depletions reduced the synthesis of recombinant xylanase by K. lactis GG799. To maximise the production of xylanase, further optimisation was performed using exponential feeding. We investigated the effects of various nitrogen sources combined with the carbon to nitrogen (C/N) molar ratio on the production of xylanase. Of the various nitrogen sources, yeast extract was found to be the most useful for recombinant xylanase production. The highest xylanase production (110.13 U mL(-1)) was measured at a C/N ratio of 50.08. These conditions led to a 45.8 % increase in xylanase activity compared with the batch cultures. Interestingly, the further addition of 500 g L(-1) glucose led to a 6.2-fold increase (465.07 U mL(-1)) in recombinant xylanase activity. These findings, together with those of the exponential feeding strategy, indicate that the composition of the C/N molar ratio has a substantial impact on recombinant protein production in K. lactis.

A new xylanase from Paenibacillus barcinonensis BP-23, Xyn11E, has been identified and characterized. Xyn11E has been cloned and heterologously expressed in Escherichia coli. It is a single-domain xylanase belonging to the family 11 of glycosyl hydrolases (GH11) with a predicted molecular weight of 20.652 kDa and an isoelectric point (pI) of 8.7. Substrate specificity, kinetic properties, and mode of action of the purified xylanase were characterized. Xyn11E exhibited high activity toward branched xylans, being beechwood xylan the preferred substrate. The optimum pH and temperature of the purified enzyme were 6.5 and 50 °C, respectively. Catalytic constants were determined on beechwood xylan, on which Xyn11E showed a Km of 12.98 mg/ml and a Vmax of 3,023 U/mg. The enzyme hydrolyzed long xylooligosaccharides, while oligomers shorter than xylotetraose were not degraded. Products released from glucuronoxylans were shorter than those liberated from cereal arabinoxylans. The xylanase was dependent on P. barcinonensis BP-23 LppX for its expression in an active form. Coexpression of Xyn11E with E. coli chaperones could not replace the need of LppX, which seems to act as a specific chaperone for Xyn11E correct folding. Activity of the enzyme on bleached pulps was evaluated. Xyn11E liberated reducing sugars from ECF and TCF pulps from eucalyptus, sisal, and flax, which makes it a good candidate for the enzymatic-assisted production of high-cellulose-content pulps from paper-grade pulps.

Microbial conversion of plant biomass to value-added products is an attractive option to address the impacts of petroleum dependency. In this study, a bacterial system was developed that can hydrolyze xylan and utilize xylan-derived xylose for growth and production of polyhydroxyalkanoates (PHAs). A β-xylosidase and an endoxylanase were engineered into a P(LA-co-3HB)-producing Escherichia coli strain to obtain a xylanolytic strain. Although PHA production yields using xylan as sole carbon source were minimal, when the xylan-based media was supplemented with a single sugar (xylose or arabinose) to permit the accumulation of xylan-derived xylose in the media, PHA production yields increased up to 18-fold when compared to xylan-based production, and increased by 37 % when compared to production from single sugar sources alone. ¹H-Nuclear magnetic resonance (NMR) analysis shows higher accumulation of xylan-derived xylose in the media when xylan was supplemented with arabinose to prevent xylose uptake by catabolite repression. ¹H-NMR, gel permeation chromatography, and differential scanning calorimetry analyses corroborate that the polymers maintain physical properties regardless of the carbon source. This study demonstrates that accumulation of biomass-derived sugars in the media prior to their uptake by microbes is an important aspect to enhance PHA production when using plant biomass as feedstock.

The high cost of recombinant enzymes for the production of biofuel from ligno-cellulosic biomass is a crucial factor affecting the economic sustainability of the process. The use of plants as biofactories for the production of the suitable recombinant enzymes might be an alternative to microbial fermentation. In the case of enzyme accumulation in chloroplasts, it is fundamental to focus on the issue of full photosynthetic efficiency of transplastomic plants in the field where they might be exposed to abiotic stress such as high light intensity and high temperature. Xylanases (EC 3.2.1.8), a group of enzymes that hydrolyse linear polysaccharides of beta-1,4-xylan into xylose, find an application in the biofuel industry favouring biomass saccharification along with other cell-wall degrading enzymes. In the present study, we analysed how a high level of accumulation of a thermostable xylanase in tobacco chloroplasts does not impact on photosynthetic performance of transplastomic plants grown outdoors. The recombinant enzyme was found to be stable during plant development, ex planta and after long-term storage.

A xylanase gene was isolated from the genomic DNA of Streptomyces coelicolor Ac-738. The 723-bp full-length gene encoded a 241-amino acid peptide consisting of a 49-residue putative TAT signal peptide and a glycoside hydrolase family-11 domain. The mature enzyme called XSC738 was expressed in Escherichia coli M15[pREP4]. The electrophoretically homogeneous protein with a specific activity of 167 U/mg for beechwood xylan was purified. The pH optimum of XSC738 was at pH 6; a high activity was retained within a pH range of 4.5-8.5. The enzyme was thermostable at 50-60 °C and retained an activity at pH 3.0-7.0. Xylanase XSC738 was activated by Mn²⁺, Co²⁺ and largely inhibited by Cd²⁺, SDS and EDTA. The products of xylan hydrolysis were mainly xylobiose, xylotriose, xylopentaose and xylohexose. Xylotetraose appeared as a minor product. Processing of such agricultural xylan-containing products as wheat, oats, soy flour and wheat bran by xylanase resulted in an increased content of sugars.

Caulobacter crescentus is able to express several enzymes involved in the utilization of lignocellulosic biomasses. Five genes, xynB1-5, that encode β-xylosidases are present in the genome of this bacterium. In this study, the xynB2 gene, which encodes β-xylosidase II (CCNA_02442), was cloned under the control of the PxylX promoter to generate the O-xynB2 strain, which overexpresses the enzyme in the presence of xylose. In addition, a null mutant strain, Δ-xynB2, was created by two homologous recombination events where the chromosomal xynB2 gene was replaced by a copy that was disrupted by the spectinomycin-resistant cassette. We demonstrated that C. crescentus cells lacking β-xylosidase II upregulates the xynB genes inducing β-xylosidase activity. Transcriptional analysis revealed that xynB1 (RT-PCR analysis) and xynB2 (lacZ transcription fusion) gene expression was induced in the Δ-xynB2 cells, and high β-xylosidase activity was observed in the presence of different agro-industrial residues in the null mutant strain, a characteristic that can be explored and applied in biotechnological processes. In contrast, overexpression of the xynB2 gene caused downregulation of the expression and activity of the β-xylosidase. For example, the β-xylosidase activity that was obtained in the presence of sugarcane bagasse was 7-fold and 16-fold higher than the activity measured in the C. crescentus parental and O-xynB2 cells, respectively. Our results suggest that β-xylosidase II may have a role in controlling the expression of the xynB1 and xynB2 genes in C. crescentus.

The aim of the present study was to investigate the taxonomic identity of yeasts isolated from the Antarctic continent and to evaluate their ability to produce enzymes (lipase, protease and xylanase) at low and moderate temperatures. A total of 97 yeast strains were recovered from marine and terrestrial samples collected in the Antarctica. The highest amount of yeast strains was obtained from marine sediments, followed by lichens, ornithogenic soils, sea stars, Salpa sp., algae, sea urchin, sea squirt, stone with lichens, Nacella concinna, sea sponge, sea isopod and sea snail. Data from polyphasic taxonomy revealed the presence of 21 yeast species, distributed in the phylum Ascomycota (n = 8) and Basidiomycota (n = 13). Representatives of encapsulated yeasts, belonging to genera Rhodotorula and Cryptococcus were recovered from 7 different Antarctic samples. Moreover, Candida glaebosa, Cryptococcus victoriae, Meyerozyma (Pichia) guilliermondii, Rhodotorula mucilaginosa and R. laryngis were the most abundant yeast species recovered. This is the first report of the occurrence of some species of yeasts recovered from Antarctic marine invertebrates. Additionally, results from enzymes production at low/moderate temperatures revealed that the Antarctic environment contains metabolically diverse cultivable yeasts, which could be considered as a target for biotechnological applications. Among the evaluated yeasts in the present study 46.39, 37.11 and 14.43 % were able to produce lipase (at 15 °C), xylanase (at 15 °C) and protease (at 25 °C), respectively. The majority of lipolytic, proteolytic and xylanolytic strains were distributed in the phylum Basidiomycota and were mainly recovered from sea stars, lichens, sea urchin and marine sediments.

An extremely thermophilic bacterial isolate that produces a high titer of thermostable endoxylanase and β-xylosidase extracellularly in an inducible manner was identified as Geobacillus thermodenitrificans TSAA1. The distinctive features of this strain are alkalitolerance and halotolerance. The endoxylanase is active over a broad range of pH (5.0-10.0) and temperatures (30-100 °C) with optima at pH 7.5 and 70 °C, while β-xylosidase is optimally active at pH 7.0 and 60 °C. The T 1/2 values of the endoxylanase and β-xylosidase are 30 min at 80 °C, and 180 min at 70 °C, respectively. The endoxylanase activity is stimulated by dithiothreitol, but inhibited strongly by EDAC and Woodward's reagent K. N-BS and DEPC strongly inhibited β-xylosidase. MALDI-ToF (MS/MS) analysis of tryptic digest of β-xylosidase revealed similarity with that of G. thermodenitrificans NG 80-2, and suggested that this belongs to the GH 52 glycosyl hydrolase super family. The action of endoxylanase on birch wood xylan and agro-residues such as wheat bran and wheat straw liberated xylooligosaccharides similar to endoxylanases of the family 10 glycoside hydrolases, while the enzyme preparation having both endoxylanase and β-xylosidase liberated xylose as main hydrolysis product.

The catalytic amino acid residues of the β-D-xylosidase (EC 3.2.1.37; GH43), from Thermobifida fusca TM51 (TfBXyl43), were investigated by direct chemical modifications. The pH dependence curves of the kinetic parameters (k(cat) and k(cat)/K(M)) gave pK values for the free enzyme (5.55 ± 0.19; 6.44 ± 0.19), and pK values of for the enzyme-substrate complex (4.85 ± 0.23; 7.60 ± 0.28) respectively, by using an artificial substrate p-nitrophenyl-β-D-xylopyranoside (pNP-Xyl). The detailed inhibition studies demonstrated well the hydrophobic character of the glycon binding site. Carbodiimide-mediated chemical modifications of the enzyme with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDAC) in the presence of glycine methyl ester supports the conclusion that a carboxylate residue can be fundamental in the catalytic process. We have also synthesized and tested N-bromoacetyl-β-D-xylopyranosylamine (NBAXA) for TfBXyl43 as an affinity label, which also inactivated the enzyme irreversible. The pH dependence studies in both cases of inactivation revealed that the modified group is the catalytic proton donor (NBAXA pK(A) = 6.68 ± 0,1; EDAC pK(A) = 7.42 ± 0.22) which displays its essential role in the hydrolytic process. The β-D-xylopyranosylazide as competitive inhibitor protected the enzyme in all cases against the inactivation, suggesting that the chemical modification which has an impact on the activity took place in the active center. Changing of the enzyme conformation was followed by CD spectroscopy, as a result of the NBAXA inactivation. Our study is important because to our knowledge no similar investigations were made in the case of an inverting β-D-xylosidase.

Mangrove fungi are vastly unexplored for enzymes with industrial application. This study aimed to assess the biocatalytic activity of mangrove fungal xylanases on recycled paper pulp. Forty-four mangrove fungal (MF) isolates were initially screened for xylanolytic activity in minimal medium with corn cob xylan as the sole carbon source. Eight MF were further cultivated under submerged fermentation for the production of crude xylanases. These crude enzymes were then characterized and tested for the pretreatment of recycled paper pulps. Results showed that 93 % of the tested MF isolates exhibited xylanolytic activity in solid medium. In submerged fermentation, salinity improved the growth of the fungal isolates but did not influence xylanase production. The crude xylanases were mostly optimally active at 50 °C and pH 7. Changes in pH had a greater effect on xylanase stability than temperature. More than half of the activity was lost at pH 9 for majority of the crude enzymes. However, two thermophilic xylanases from Fusarium sp. KAWIT-A and Aureobasidium sp. 2LIPA-M and one alkaliphilic xylanase from Phomopsis sp. MACA-J were also produced. All crude enzymes exhibited cellulase activities ranging from 4 to 21 U/ml. Enzymatic pretreatment of recycled paper pulps with 5 % consistency produced 70-650 mg of reducing sugars per gram of pulp at 50 °C after 60 min. The release of high amounts of reducing sugars showed the potential of mangrove fungal crude xylanases in the local paper and pulp industry. The diverse properties shown by the tested crude enzymes also indicate its potential applications to other enzyme-requiring industries.

Ruminant digestive tract microbes hydrolyse plant biomass, and the application of metagenomic techniques can provide good coverage of their glycosyl hydrolase enzymes. A metagenomic library of circa 70,000 fosmids was constructed from bacterial DNA isolated from bovine rumen and subsequently screened for cellulose hydrolysing activities on a CMC agar medium. Two clones were selected based on large clearance zones on the CMC agar plates. Following nucleotide sequencing, translational analysis and homology searches, two cellulase encoding genes (cel5A and cel5B) belonging to the glycosyl hydrolyse family 5 were identified. Both genes encoded pre-proteins of about 62 kDa, containing signal leader peptides which could be cleaved to form mature proteins of about 60 kDa. Biochemical characterisation revealed that both enzymes showed alkaline pH optima of 9.0 and the temperature optima of 65 °C. Substrate specificity profiling of the two enzymes using 1,4-β-D-cello- and xylo-oligosaccharides revealed preference for longer oligosaccharides (n ≥ 3) for both enzymes, suggesting that they are endo-cellulases/xylanases. The bifunctional properties of the two identified enzymes render them potentially useful in degrading the β-1,4 bonds of both the cellulose and hemicellulose polymers.

In the present work, the gene xynB2, encoding a β-xylosidase II of the Glycoside Hydrolase 39 (GH39) family, of Caulobacter crescentus was cloned and successfully overexpressed in Escherichia coli DH10B. The recombinant protein (CcXynB2) was purified using nickel-Sepharose affinity chromatography, with a recovery yield of 75.5 %. CcXynB2 appeared as a single band of 60 kDa on a sodium dodecyl sulfate polyacrylamide gel and was recognized by a specific polyclonal antiserum. The predicted CcXynB2 protein showed a high homology with GH39 β-xylosidases of the genus Xanthomonas. CcXynB2 exhibited an optimal activity at 55 °C and a pH of 6. CcXynB2 displayed stability at pH values of 4.5-7.5 for 24 h and thermotolerance up to 50 °C. The K (M) and V (Max) values were 9.3 ± 0.45 mM and 402 ± 19 μmol min(-1) for ρ-nitrophenyl-β-D-xylopyranoside, respectively. The purified recombinant enzyme efficiently produced reducing sugars from birchwood xylan and sugarcane bagasse fibers pre-treated with a purified xylanase. As few bacterial GH39 family β-xylosidases have been characterized, this work provides a good contribution to this group of enzymes.

The hemicellulose xylan constitutes a major portion of plant biomass, a renewable feedstock available for conversion to biofuels and other bioproducts. β-xylosidase operates in the deconstruction of the polysaccharide to fermentable sugars. Glycoside hydrolase family 43 is recognized as a source of highly active β-xylosidases, some of which could have practical applications. The biochemical details of four GH43 β-xylosidases (those from Alkaliphilus metalliredigens QYMF, Bacillus pumilus, Bacillus subtilis subsp. subtilis str. 168, and Lactobacillus brevis ATCC 367) are examined here. Sedimentation equilibrium experiments indicate that the quaternary states of three of the enzymes are mixtures of monomers and homodimers (B. pumilus) or mixtures of homodimers and homotetramers (B. subtilis and L. brevis). k cat and k cat/K m values of the four enzymes are higher for xylobiose than for xylotriose, suggesting that the enzyme active sites comprise two subsites, as has been demonstrated by the X-ray structures of other GH43 β-xylosidases. The K i values for D-glucose (83.3-357 mM) and D-xylose (15.6-70.0 mM) of the four enzymes are moderately high. The four enzymes display good temperature (K t (0.5) ∼ 45 °C) and pH stabilities (4.6 to10.3). At pH 6.0 and 25 °C, the enzyme from L. brevis ATCC 367 displays the highest reported k cat and k cat/K m on natural substrates xylobiose (407 s(-1), 138 s(-1) mM(-1)), xylotriose (235 s(-1), 80.8 s(-1) mM(-1)), and xylotetraose (146 s(-1), 32.6 s(-1) mM(-1)).

The subject of our investigations was a recombinant β-D-xylosidase (TfBXyl43) from Thermobifida fusca TM51 which was expressed in E. coli BL21DE3 and was purified to apparent homogeneity. The SDS-PAGE investigations demonstrated that the molecular weight of the monomer unit is 62.5 kDa but the native-PAGE studies indicated that the mass of the enzyme is 240-250 kDa which proves the presence of a characteristic homo oligomer quaternary structure in solution phase. Optimal parameters of the enzyme activity were at pH 6.0 and 50 °C. The enzyme showed little stability under pH 4.5 and above 60 °C. The substrate specificity investigations indicated that the TfBXyl43 is an exo-glycosidase, hydrolyzing only xylobiose and -triose from the nonreducing end. Besides the enzyme shows very high specificity on the glycon part of the substrate, since it can only hydrolyze β-D-xylopyranoside derivatives. The importance of hydrophobic interactions in the binding of the substrates are supported that the enzyme can hydrolize about four times more efficiently the artificial p-nitrophenyl-β-D-xylopyranoside substrate compared to the natural one, xylobiose. Furthermore we could detect transxylosidase activity both in the case of xylobiose and p-nitrophenyl-β-D-xylopyranoside donors which is the first example among the inverting β-D-xylosidases from T. fusca.

The xynB1 gene (CCNA 01040) of Caulobacter crescentus that encodes a bifunctional enzyme containing the conserved β-Xylosidase and α-L-Arabinofuranosidase (β-Xyl I-α-L-Ara) domains was amplified by PCR and cloned into the vector pJet1.2Blunt. The xynB1 gene was subcloned into the vector pPROEX-hta that produces a histidine-fused translation product. The overexpression of recombinant β-Xyl I-α-L-Ara was induced with IPTG in BL21 (DE3) and the resulting intracellular protein was purified with pre-packaged nickel-Sepharose columns. The recombinant β-Xyl I-α-L-Ara exhibited a specific β-Xylosidase I activity of 1.25 U mg(-1) to oNPX and a specific α-L-Arabinofuranosidase activity of 0.47 U mg(-1) to pNPA. The predominant activity of the recombinant enzyme was its β-Xylosidase I activity, and the enzymatic characterization was focused on it. The β-Xylosidase I activity was high over the pH range 3-10, with maximal activity at pH 6. The enzyme activity was optimal at 45 °C, and a high degree of stability was verified over 240 min at this temperature. Moreover, β-Xylosidase activity was inhibited in the presence of the metals Zn(2+) and Cu(2+), and the enzyme exhibited K(M) and V(Max) values of 2.89 ± 0.13 mM and 1.4 ± 0.04 μM min(-1) to oNPX, respectively. The modeled structure of β-xylosidase I showed that its active site is highly conserved compared with other structures of the GH43 family. The increase in the number of contact residues responsible for maintaining the dimeric structure indicates that this dimer is more stable than the tetramer form.

Two novel thermo-alkali-tolerant crude xylanases namely MLK-01 (enzyme-A) and MLK-07 (enzyme-B) from Coprinellus disseminatus mitigated kappa numbers of Anthocephalus cadamba kraft-AQ pulps by 32.5 and 34.38%, improved brightness by 1.5 and 1.6% and viscosity by 5.75 and 6.47% after (A)XE(1) and (B)XE(1)-stages, respectively. The release of reducing sugars and chromophores was the highest during prebleaching of A. cadamba kraft-AQ pulp at enzyme doses of 5 and 10 IU/g, reaction times 90 and 120 min, reaction temperatures 75 and 65°C and consistency 10% for MLK-01 and MLK-07, respectively. MLK-07 was more efficient than MLK01 in terms of producing pulp brightness, improving mechanical strength properties and reducing pollution load. MLK-01 and MLK-07 reduced AOX by 19.51 and 42.77%, respectively at 4% chlorine demands with an increase in COD and colour due to removal of lignin carbohydrates complexes. A. cadamba kraft-AQ pulps treated with xylanases from MLK-01 to MLK-07 and followed by CEHH bleaching at half chlorine demand (2%) showed a drastic reduction in brightness with slight improvement in mechanical strength properties compared to pulp bleached at 4% chlorine demand. MLK-01 reduced AOX, COD and colour by 43.83, 39.03 and 27.71% and MLK-07 by 38.34, 40.48 and 30.77%, respectively at half chlorine demand compared to full chlorine demand (4%). pH variation during prebleaching of A. cadamba kraft-AQ pulps with strains MLK-01 and MLK-07 followed by CEHH bleaching sequences showed a decrease in pulp brightness, AOX, COD and colour with an increase in mechanical strength properties, pulp viscosity and PFI revolutions to get a beating level of 35 ± 1 °SR at full chlorine demand.

A new xylanase gene, named xyn186, was cloned by the genome-walking PCR method from the Alternaria sp. HB186. The sequence of xyn186 contains a 748 bp open reading frame separated by one intron with the size of 52 bp. The cDNA was obtained by DpnI-mediated intron deletion. The cDNA was cloned into pHBM905A and transformed into Pichia pastoris GS115 to screen xylanase-secreting transformants on RBB-xylan plates. The molecular mass of the enzyme was estimated to be 23 kDa on SDS-PAGE. The optimal pH and temperature of the purified enzyme is 6 and 50°C, respectively. The K (m) and V (max) valued for birchwood xylan are 1.404 mg ml(-1) and 0.2748 mmol min(-1) mg(-1), respectively. The inhibitory effects of various metal ions were investigated, Cu(2+) and Hg(2+) ions inhibited most of the enzyme activity. The gene copy number of xyn186 in the genome of P. pastoris was estimated as two by the Real-time PCR. To date, xyn186 gene is the first xylanase gene cloned from the genus Alternaria.

Two β-glucosidase/xylosidase genes, Rubg3A and Rubg3B, were cloned from yak rumen uncultured microorganisms by metagenome method and function-based screening. Recombinant RuBG3A and RuBG3B purified from Escherichia coli were characterized for enzymatic properties, and they exhibited activity against 4-nitrophenyl-β-D: -glucopyranoside and 4-nitrophenyl-β-D: -xylopyranoside, suggesting bifunctional β-glucosidase/xylosidase activity. Chromatography analysis showed that they could effectively hydrolyze cellooligosaccharide substrates, indicating the facilitation in saccharification of cellulose. RuBG3A and RuBG3B can also increase the reducing sugar released in xylan hydrolysis to 218% and 169%, respectively, through synergism with xylanase, suggesting their application in hemicellulose saccharification. Molecular modeling and substrate docking showed that there should be one active center responsible for the bifunctional activity in each enzyme, since the active site pocket is substantially wide to allow the entry of both β-glucosidic or β-xylosidic substrates, which elucidated the structure-function relationship in substrate specificities. Therefore, the enzymatic properties, the participation in hydrolysis of cellooligosaccharides, and the synergism with xylanase make RuBG3A and RuBG3B very interesting candidates for saccharification of both cellulose and hemicellulose.

Tricholoma matsutake is an economically important ectomycorrhizal fungus of coniferous woodlands. Mycologists suspect that this fungus is also capable of saprotrophic feeding. In order to evaluate this hypothesis, enzyme and chemical assays were performed in the field and laboratory. From a natural population of T. matsutake in southern Finland, samples of soil-mycelium aggregate (shiro) were taken from sites of sporocarp formation and nearby control (PCR-negative) spots. Soil organic carbon and activity rates of hemicellulolytic enzymes were measured. The productivity of T. matsutake was related to the amount of utilizable organic carbon in the shiro, where the activity of xylosidase was significantly higher than in the control sample. In the laboratory, sterile pieces of bark from the roots of Scots pine were inoculated with T. matsutake and the activity rates of two hemicellulolytic enzymes (xylosidase and glucuronidase) were assayed. Furthermore, a liquid culture system showed how T. matsutake can utilize hemicellulose as its sole carbon source. Results linked and quantified the general relationship between enzymes secreted by T. matsutake and the degradation of hemicellulose. Our findings suggest that T. matsutake lives mainly as an ectomycorrhizal symbiont but can also feed as a saprotroph. A flexible trophic ecology confers T. matsutake with a clear advantage in a heterogeneous environment and during sporocarp formation.

Xylooligosaccharides have strong bifidogenic properties and are increasingly used as a prebiotic. Nonetheless, little is known about the degradation of these substrates by bifidobacteria. We characterized two recombinant β-xylosidases, XylB and XylC, with different substrate specificities from Bifidobacterium adolescentis. XylB is a novel β-xylosidase that belongs to the recently introduced glycoside hydrolase family 120. In contrast to most reported β-xylosidases, it shows only weak activity on xylobiose and prefers xylooligosaccharides with a degree of polymerization above two. The remaining xylobiose is efficiently hydrolyzed by the second B. adolescentis β-xylosidase, XylC, a glycoside hydrolase of family 43. Furthermore, XylB releases more xylose from arabinose-substituted xylooligosaccharides than XylC (30% and 20%, respectively). The different specificities of XylB, XylC, and the recently described reducing-end xylose-releasing exo-oligoxylanase RexA show how B. adolescentis can efficiently degrade prebiotic xylooligosaccharides.

The second messenger nitric oxide (NO), phosphatidic acid (PA) and reactive oxygen species (ROS) are involved in the plant defense response during plant–pathogen interactions. NO has been shown to participate in PA production in response to the pathogen-associated molecular pattern xylanase in tomato cell suspensions. Defense responses downstream of PA include ROS production. The goal of this work was to study the signaling mechanisms involved in PA production during the defense responses triggered by xylanase and mediated by NO in the suspension-cultured tomato cells. We analyzed the participation of protein kinases, guanylate cyclase and the NO-mediated posttranslational modification S-nitrosylation, by means of pharmacology and biochemistry. We showed that NO, PA and ROS levels are significantly diminished by treatment with the general protein kinase inhibitor staurosporine. This indicates that xylanase-induced protein phosphorylation events might be the important components leading to NO formation, and hence for the downstream regulation of PA and ROS levels. When assayed, a guanylate cyclase inhibitor or a cGMP analog did not alter the PA accumulation. These results suggest that a cGMP-mediated pathway is not involved in xylanase-induced PA formation. Finally, the inhibition of protein S-nitrosylation did not affect NO formation but compromised PA and ROS production. Data collectively indicate that upon xylanase perception, cells activate a protein kinase pathway required for NO formation and that, S-nitrosylation-dependent mechanisms are involved in downstream signaling leading to PA and ROS. Fil: Lanteri, Maria Luciana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigaciones Biológicas; Argentina. Universidad Nacional de Mar del Plata; Argentina Fil: Lamattina, Lorenzo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigaciones Biológicas; Argentina. Universidad Nacional de Mar del Plata; Argentina Fil: Laxalt, Ana Maria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigaciones Biológicas; Argentina. Universidad Nacional de Mar del Plata; Argentina

Although many xylanases are widely used in the baking industry, only one glycoside hydrolase family 10 (GH 10) xylanase has previously been reported to be effective in baking. In this study, we compared the effectiveness of two GH 10 xylanases, psychrophilic XynA from Glaciecola mesophila and mesophilic EX1 from Trichoderma pseudokoningii, in bread making. The optimal dosages needed to improve wheat flour dough and bread quality were 270-U/kg flour for EX1 and 0.9-U/kg flour for XynA. At their optimal dosage, both XynA and EX1 had significant dough-softening ability, resulting in a 50% reduction in Brabender units. XynA was more effective than EX1 in reducing the time to reach maximum consistency. XynA and EX1 showed similar effects in improving the bread volume (~30% increase). EX1 was more effective in reducing the initial crumb firmness. Although both enzymes exhibited similar anti-staling effects on the bread, based on a decrease in the bread firmness, XynA had a greater effect on reducing the firming rate, and EX1 showed an enhanced reduction in the initial firmness. These results show that these two GH 10 xylanases have unique advantages in improving dough and bread quality and indicate their potential in bread making.

Xyloglucan is the most abundant hemicellulose in the walls of dicots such as Arabidopsis. It is part of the load-bearing structure of a plant cell and its metabolism is thought to play a major role in cell elongation. However, the molecular mechanism by which xyloglucan carries out this and other functions in planta is not well understood. We performed a forward genetic screen utilizing xyloglucan oligosaccharide mass profiling on chemically mutagenized Arabidopsis seedlings to identify mutants with altered xyloglucan structures termed axy-mutants. One of the identified mutants, axy3.1, contains xyloglucan with a higher proportion of non-fucosylated xyloglucan subunits. Mapping revealed that axy3.1 contains a point mutation in XYLOSIDASE1 (XYL1) known to encode for an apoplastic glycoside hydrolase releasing xylosyl residues from xyloglucan oligosaccharides at the non-reducing end. The data support the hypothesis that AXY3/XYL1 is an essential component of the apoplastic xyloglucan degradation machinery and as a result of the lack of function in the various axy3-alleles leads not only to an altered xyloglucan structure but also a xyloglucan that is less tightly associated with other wall components. However, the plant can cope with the excess xyloglucan relatively well as the mutant does not display any visible growth or morphological phenotypes with the notable exception of shorter siliques and reduced fitness. Taken together, these results demonstrate that plant apoplastic hydrolases have a larger impact on wall polymer structure and function than previously thought. Electronic supplementary material The online version of this article (doi:10.1007/s00425-010-1330-7) contains supplementary material, which is available to authorized users.