Search

In this study, a 5-degrees-of-freedom dynamic model of variable lead preloaded single nut ball screw is proposed. The proposed model considers the effect of excitation amplitude, deflection angle, the number of balls, and the preload into consideration. Moreover, to study the effect of working parameters on nonlinear dynamics, bifurcation diagram, 3-D frequency spectrum, phase diagram and Poincaré section with different system parameters are shown in discussion section. The numerical analysis indicates that the system can exhibits different motion states, and the continuous frequency component can be observed. Moreover, a series of experiments are conducted to estimate the dynamic parameters and validate the proposed dynamic model.

Human papillomavirus genotypes (HPVs) have been confirmed to be the major cause of cervical intraepithelial neoplasia (CIN) that remains to be one of the most common women cancers around the world. It seems other risk factors have synergistic effects on cervical cancer occurrence including smoking, dietary pattern, sexual behavior, ethnicity, epigenetics, and environmental hazardous materials. Our study characterized the potential cancerous role of lead (Pb) as a common toxic environmental pollutant agent on CIN outcomes. Lead concentration was quantified using an atomic absorption spectrometer in liquid-based cytology specimens of 40 CIN-HPV positive subjects, 50 HPV infected non-cancerous cases, and 43 non-HPV infected/non-cancerous women. Pb concentration was 5.5 (4.7–6.4) μg/dL, 4.7 (4.2–8.7) μg/dL, and 4.7 (4.5–5.4) μg/dL in the CIN-HPV positive group, HPV infected non-cancerous cases, and non-HPV infected/non-cancerous group, respectively. The results showed higher Pb concentration is associated with higher risk for cervical malignancy in comparison with non-HPV infected/non-cancerous subjects, after controlling for age effect (aOR = 4.55, 95% CI: 1.55–15.07, P < 0.01). Our finding suggested a direct significant association between Pb accumulation and CIN existence. The consequences need to be further validated by including more relevant risk factors and controlling the confounders for better understating of Pb impact from outdoor air pollution on cervical cancer progression.

PURPOSE Leaflet thrombosis is a significant adverse event after transcatheter aortic valve (TAV) replacement (TAVR). The purpose of our study was to present a semi-empirical, mathematical model that links patient-specific anatomic, valve, and flow parameters to predict likelihood of leaflet thrombosis. METHODS The two main energy sources of neo-sinus (NS) washout after TAVR include the jet flow downstream of the TAV and NS geometric change in volume due to the leaflets opening and closing. Both are highly dependent on patient anatomic and hemodynamic factors. As rotation of blood flow is prevalent in both the sinus of Valsalva and then the NS, we adopted the vorticity flux or circulation (Г) as a metric quantifying overall washout. Leaflet thrombus volumes were segmented based on hypo-attenuating leaflet thickening (HALT) in post-TAVR patient's gated computed tomography. Г was assessed using dimensional scaling as well as computational fluid dynamics (CFD) respectively and correlated to the thrombosis volumes using sensitivity and specificity analysis. RESULTS Г in the NS, that accounted for patient flow and anatomic conditions derived from scaling arguments significantly better predicted the occurrence of leaflet thrombus than CFD derived measures such as stasis volumes or wall shear stress. Given results from the six patient datasets considered herein, a threshold Г value of 28.0 yielded a sensitivity and specificity of 100% where patients with Gamma < 28 developed valve thrombosis. A 10% error in measurements of all variables can bring the sensitivity specificity down to 87%. CONCLUSION A predictive model relating likelihood of valve thrombosis using Г in the NS was developed with promising sensitivity and specificity. With further studies and improvements, this predictive technology may lead to alerting physicians on the risk for thrombus formation following TAVR.

INTRODUCTION Nowadays the majority of the surgical procedures are video surgeries. Despite technological advances, some problems remain. The buildup of residues in front of the lens is an example of this problem. To solve it, Abreu et al. (Surg Technol Int 26:43-47, 2015) developed LacrimaSurg, which works as a lacrimal duct in the optics preventing fogging and residues buildup on it. This had 98.1% of efficiency in an experimental study. OBJECTIVE Study feasibility and safety of the device under real surgical conditions. MATERIALS AND METHODS A pilot study included 30 patients undergoing thoracic procedures using LacrimaSurg. Procedures were recorded for further analysis by investigators. The characteristics of patients (age, sex, body mass index, Charlton comorbidity index), data of environment (Temperatures variances), and data of procedures (type of surgery and duration of it) were recorded. The investigators watched the videos and recorded the residue buildup and fogging events that impaired surgeon's vision. The number of times the optics got dirty, need for further jets of crystalloid solution, and need for mechanical cleaning were collected to evaluate efficacy. Comparative serum measurements of electrolytes before and after surgery were studied. Data were organized and analyzed by simple linear correlations and t test for continuous variables and Fisher's test for categorical variables. RESULTS The use of the device allowed 97% of the procedures to be performed without interruption. No characteristics inherent to the patients or to the procedures that lead to fogging or filth of the optics were identified. There were no statistically significant differences between pre- and postoperative serum ions, and no postoperative complications related to the use of the device were observed. CONCLUSION The device was effective in preventing interruption of surgical procedures due to dirt or fogging, its use was considered safe, and did not cause postoperative complications.

This paper presents the results of the analysis of acoustic emission signals (AE) recorded during the propagation of sound waves in rock samples. The sources are excited by breaking a 3-mm-thick pencil lead (Hsu-Nielsen) on the surface of the rock samples at different AE source locations. Ten repetitions of pencil lead fracturing were performed at a given location. A VS150-M piezoelectric sensor with a frequency range of 100–450 kHz was attached to the upper surface of the rock samples. The results showed that the AE energy and the average frequency of the acoustic emission signals in the rock samples decreased with increasing distance from the AE source locations. These results can be used to establish a relationship between the characteristics of the acoustic emission signals and different rock types at different AE source locations.

Smartphones that can support and assist the screening of various cardiovascular diseases are gaining popularity in recent years. The timely detection, diagnosis, and treatment of atrial fibrillation (AF) are critical, especially for those who are at risk of stroke. AF detection via screening with wearable devices should always be confirmed by a standard 12-lead electrocardiogram (ECG). However, the inability to perform on-site AF confirmatory testing results in increased patient anxiety, followed by unnecessary diagnostic procedures and treatments. Also, the delay in confirmation procedure may conclude the condition as non-AF while it was indeed present at the time of screening. To overcome these challenges, we propose an efficient on-site confirmatory testing for AF with 12-lead ECG derived from the reduced lead set (RLS) in a wireless body area network (WBAN) environment. The reduction in the number of leads enhances the comfort level of patients as well as minimizes the hurdles associated with continuous telemonitoring applications such as data transmission, storage, and bandwidth of the overall system. The proposed method is characterized by segment-wise regression and a lead selection algorithm, facilitating improved P-wave reconstruction. Further, an efficient AF detection algorithm is proposed by incorporating a novel three-level P-wave evidence score with an RR irregularity evidence score. The proposed on-site AF confirmation test reduces false positives and false negatives by 88% and 53% respectively, compared to single lead screening. In addition, the proposed lead derivation method improves accuracy, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$F_1$$\end{document}F1-score, and Matthews correlation coefficient (MCC) for the on-site AF detection compared to existing related methods.

Left bundle branch pacing (LBBP) is a novel near-physiological pacing method that still lacks quantitative criteria to guide the selection of lead-implanted sites to enhance the success likelihood of lead deployments. This study aimed to quantitatively analyze the relationships of LBBP success likelihood to the distribution of lead-implanted sites and the lead-localization-pacing electrocardiographic (ECG) features. All the lead-implanted sites in patients with finally successful LBBP were enrolled for analysis, including successful and failed sites. A novel coordinate system was invented to describe the sites’ distribution as longitudinal distance (longit-dist) and lateral distance (lat-dist). Corrected distance parameters were generated to eliminate the cardiac dimension variations. The lead-localization-pacing ECG parameters were also collected, such as paced QRS duration (locat-QRSd), left ventricular activation time (locat-LVAT), LVAT/QRSd ratio (locat-LVAT/QRSd), and QRS directions. A total of 94 patients with 105 successful sites and 93 failed sites were enrolled. Longit-dist and corrected longit-dist of successful sites were significantly longer, while locat-QRSd and locat-LVAT were shorter and locat-LVAT/QRSd was lower than failed sites. There was a positive dose–response relationship between LBBP success likelihood and corrected longit-dist with a cut-off of 26.95 mm, whereas there were negative dose–response relationships of LBBP success likelihood to locat-QRSd, locat-LVAT, and locat-LVAT/QRSd with the cut-offs of 142 ms, 92 ms, and 64.7%, respectively. Downward QRS direction in II/III ECG leads was also associated with successful LBBP. Longit-dist, locat-QRSd, locat-LVAT, and locat-LVAT/QRSd were quantitative parameters to guide the selection of lead-implanted sites during LBBP implantation. Quantitative distance and electrocardiographic parameters for lead-implanted site selection to enhance the success likelihood of left bundle branch pacing. LBBP, left bundle branch pacing; Longit-dist, longitudinal distance; CL-apex-dist, distance from contraction line to apex; LBBB, left bundle branch block; IVCD, intraventricular conduction delay; Locat-QRSd, lead-localization-pacing QRS duration; Locat-LVAT, lead-localization-pacing left ventricular activation time; Locat-LVAT/QRSd, lead-localization-pacing LVAT/QRSd ratio.

Mobile diamond wire sawing is a highly flexible, productive and, versatile cutting process. Accordingly, it is used in many areas, such as the dismantling of nuclear power plants or wind turbines. Despite the widespread use of the process, the cutting process requires continuous manual monitoring by the machine operator. This is due to the continuously changing cutting conditions. A common process error is tool breakage. It is often caused by the displacement of the grinding segments (cutting beads). Due to the cutting speed (up to 30 m/s), these failures cannot be detected and prevented by the machine operator. However, a measuring system or process monitoring does not exist yet. Accordingly, a damaged diamond wire can become hooked, which often results in wire breaks. As a result, grinding segments break away from the wire, which can lead to deadly accidents. Therefore, a new approach for monitoring the tool for diamond wire grinding will be investigated. The paper is divided into five sections. First, the requirements for the sensor system are derived. After the selection of a measuring principle and the functional verification in the grinding process, the monitoring approach is presented and features for monitoring the tool with regard to the displacement of grinding segments are described. It was shown that the developed approach is suitable for monitoring the diamond wire tool during the sawing process. The investigation on a prepared diamond wire tool also demonstrated that the feature allows the detection of displacing grinding segments already from 2 mm.

Background Lead exposure is associated with behavioral problems in children, but the age(s) of greatest susceptibility to low-level lead exposure is unknown. Objective We evaluated the association of repeated blood lead concentrations with parent-reported behaviors to identify periods of heightened susceptibility during infancy and childhood (HOME Study; Cincinnati, OH; 2003-2006; n = 244). Methods We quantified lead in whole blood samples (ages 1, 2, 3, 4, 5, and 8 years) and assessed behavior using the Behavioral Assessment System for Children-2 (BASC-2; ages 2, 3, 4, 5, and 8 years). We used multiple informant models and modified Poisson regression to estimate covariate-adjusted associations of ln-transformed blood lead concentrations with continuous BASC-2 T-scores and the relative risk of behavior scores classified as at-risk or clinically significant, respectively. Results We observed trends indicating that higher blood lead concentrations at all ages were adversely associated with scores on behavioral scales. On the Externalizing Problems and Adaptive Skills scales, these associations were strongest for blood lead concentrations at age 8 years (β = 3.1-point; 95% CI = 0.7, 5.4 and β = -2.2-point; 95% CI = -4.9, 0.5, respectively) compared with other ages. Overall, higher blood lead concentrations were associated with elevated risk of behavior scores classified as at-risk or clinically significant on the Adaptive Skills, Behavioral Symptom Index, and Externalizing Problems scales. Significance Contemporary levels of lead exposure during the first 8 years of life were associated with ADHD-related behaviors, specifically aggression, hyperactivity, and conduct problems. Impact statement Our results highlight the importance of primary lead prevention across childhood.

The paper illustrates the performance of Tri-Gate (TG) Dual Material (DM) SOI (Silicon on Insulator) Junctionless (JL) FET operating in Junction Accumulation Mode (JAM). An analytical model is developed to evaluate its performance. The device is also simulated using Silvaco device simulator. Both the analytical and simulation results are compared and found to match closely. Quasi 3-D modeling approach is adopted here to determine the surface potential of the above device. In this technique, the entire 3-D device is segregated into two 2-D devices with certain physical constraints. These 2-D devices are then analyzed separately to obtain the surface potentials, which are added together using suitable multiplication factors to get the surface potential of the 3-D device. This surface potential is, in turn, used to model the threshold voltage, sub-threshold drain current ( I d,sub ) and the drain induced barrier lowering (DIBL). The proposed device configuration reduces the I OFF significantly and offers excellent immunity to SCEs. The response of the proposed device is studied for the variations of certain device parameters, such as, thickness of High- K dielectric layer in stack gate, channel doping, and the workfunctions as well as lengths of the gate metals. Such study will lead to turn the proposed device immune to short channel effects through proper choice of various parameters.

Total knee arthroplasty (TKA) is one of the most commonly performed, major elective surgeries in the USA. African American TKA patients on average experience worse clinical outcomes than whites, including lower improvements in patient-reported outcomes and higher rates of complications, hospital readmissions, and reoperations. The mechanisms leading to these racial health disparities are unclear, but likely involve patient, provider, healthcare system, and societal factors. Lower physical and mental health at baseline, lower social support, provider bias, lower rates of health insurance coverage, higher utilization of lower quality hospitals, and systemic racism may contribute to the inferior outcomes that African Americans experience. Limited evidence suggests that improving the quality of surgical care can offset these factors and lead to a reduction in outcome disparities.

Limited data exist on the prevalence and prognosis of isolated posterior ST-segment elevation acute myocardial infarction (STEMI), revealed with a posterior chest lead. Furthermore, the utility of a synthesized-V7-9 lead in the diagnosis of STEMI is unclear; therefore, we aimed to evaluate its usefulness. We enrolled 142 consecutive patients with STEMI with the culprit lesion on the left circumflex artery (STEMI-LCx) undergoing percutaneous coronary intervention (PCI) between January 2009 and December 2019. We retrospectively checked the ST-segment change of both standard 12-lead and synthesized-V7-9 lead in all patients with STEMI-LCx. Based on electrocardiogram (ECG) findings, isolated posterior STEMI that was only revealed in synthesized-V7-9 lead was classified as "STEMI-LCx-synV7-9" and the remaining as "STEMI-LCx-12ECG." The prevalence of STEMI-LCx-synV7-9 in patients with STEMI-LCx was assessed. The incidence of all-cause death, cardiac death, and mechanical complications within 30 days, 3 months, and 1 year was also assessed according to each STEMI-LCx. STEMI-LCx-synV7-9 and STEMI-LCx-12ECG occurred in 10 (7.0%) and 132 (93.0%) patients, respectively. No significant difference was found in patients' characteristics between the two groups. The patients with STEMI-LCx-synV7-9 had significantly higher incidences of cardiac death within 3 months and 1 year (30.0% vs. 6.1%, P = 0.031, 30.0% vs. 7.6%, P = 0.050, respectively) and mechanical complications in each follow-up period (20.0% vs. 1.5%, P = 0.025) than those with STEMI-LCx-12ECG. STEMI-LCx-synV7-9 was observed in 7.0% of the patients with STEMI-LCx. Our findings suggest that the synthesized-V7-9 lead helps diagnose isolated posterior STEMI and might improve prognosis in patients with STEMI-LCx.

Purpose of Review Cardiac resynchronization therapy (CRT) represents a well-established and effective non-pharmaceutical heart failure (HF) treatment in selected patients. Still, a significant number of patients remain CRT non-responders. An optimal placement of the left ventricular (LV) lead appears crucial for the intended hemodynamic and hence clinical improvement. A well-localized target area and tools that help to achieve successful lead implantation seem to be of utmost importance to reach an optimal CRT effect. Recent Findings Recent studies suggest previous multimodal imaging (CT/cMRI/ECG torso) to guide intraprocedural LV lead placement. Relevant benefit compared to empirical lead optimization is still a matter of debate. Technical improvements in leads and algorithms (e.g., multipoint pacing (MPP), adaptive algorithms) promise higher procedural success. Recently emerging alternatives for ventricular synchronization such as conduction system pacing (CSP), LV endocardial pacing, or leadless pacing challenge classical biventricular pacing. Summary This article reviews current strategies for a successful planning, implementation, and validation of the optimal CRT implantation. Pre-implant imaging modalities offer promising assistance for complex cases; empirical lead positioning and intraoperative testing remain the cornerstone in most cases and ensure a successful CRT effect.

Springs are mechanical devices which are used quite extensively in different industries and mechanisms. Traditionally, springs have been manufactured by wrapping a hot wire around a rotating mandrel. This process has certain limitations because it is difficult to vary the spring parameters such as pitch and wire diameter. However, through the use of AM processes, with the complexity-for-free approach, it is possible to design and manufacture springs with variable spring parameters. Furthermore, it is also possible to create springs with multiple helices as opposed to traditional springs with a single helix. In this study, 32 springs with different numbers of helices, variable pitch profiles, variable wire diameters, and constant mass were designed. The springs were manufactured for experimental validation using HP MJF 520, which is a hybrid AM process. The stiffness of these springs was calculated analytically, through FEA, and experimentally validated. It was observed that increasing the number of helices in a spring leads to an increase in the stiffness of the spring. Furthermore, springs with variable pitch profiles and variable wire diameters have greater stiffness as compared to springs with constant parameters. However, with the increase in stiffness, the fatigue life of the springs decreases exponentially. Improvement in the stiffness of the springs without increasing the mass and therefore cost can lead to new and improved designs. These springs show great potential for industries where weight is an important consideration, such as aerospace and automotive. As these springs have a higher stiffness for the same mass, they can lead to designs with a light weight, and lower package volumes.

Running is a popular activity practiced worldwide. It is important to understand how running affects joint health to provide recommendations to sports medicine practitioners and runners. Our aim was to summarize the influence of running on lower limb cartilage morphology and composition using quantitative magnetic resonance imaging (MRI). Prospective repeated-measures studies evaluating cartilage using MRI before and after running were included. Data sources included Pubmed, Embase, CINAHL, SportDiscus, Web of Science, and Cochrane Central Registry of Controlled Trials. Qualitative analyses considered the number and methodological quality ratings of studies based on the QualSyst tool, and recommendations were based on the strength of evidence (strong, moderate, limited, or very limited). Quantitative analysis involved meta-analyses, for which effect sizes were calculated as Hedge’s g standardized mean differences. We included 43 articles, assessing seven outcomes (lesions, volume, thickness, glycosaminoglycan content, and T1ρ, T2, and T2* relaxation times). Nineteen articles were rated as high quality, 24 were rated as moderate quality, and none were rated as low quality. Qualitative analyses suggest that running may cause an immediate reduction in knee cartilage volume, thickness, as well as T1ρ and T2 relaxation times immediately; however, these changes did not persist. Meta-analyses revealed a small and moderate decrease immediately following a single running bout in T2 relaxation time in the medial femur and tibia, respectively. Qualitative analyses indicated that the influence of repeated exposure to running on cartilage morphology and composition was limited. Despite conflicting evidence regarding pre-existing knee cartilage lesions, moderate evidence suggests that running does not lead to the formation of new lesions. Repeated running exposure did not cause changes to foot and ankle cartilage thickness or composition. Changes to lower limb cartilage following running are transient. Immediate changes to cartilage morphology and composition, which likely reflect natural fluid dynamics, do not persist and were generally not significant when pooled statistically. Results suggest that cartilage recovers well from a single running bout and adapts to repeated exposure. Given that moderate evidence indicates that running does not lead to new lesions, future trials should focus on clinical populations, such as those with osteoarthritis. Not applicable.

The objectives were to determine whether levator ani muscle (LAM) motor function is associated with female stress urinary incontinence (SUI) severity, and whether changes in LAM motor function induced through pelvic floor muscle training (PFMT) are associated with improvements in SUI signs and symptoms. Pelvic morphology and LAM function were evaluated using ultrasound imaging and manual palpation using the elements of the PERFECT Scheme (Power, Endurance, Repetitions, Fast contractions, Elevation, Co-contraction and Timing) before and after women with SUI underwent a 12-week PFMT intervention. SUI severity was determined subjectively (ICIQ-FLUTS-UI) and objectively (30-min pad test [30MPT]). At baseline (n = 97), less leakage on the 30MPT was weakly associated with higher bladder neck position (ρs = −0.209,p = 0.044), yet with lower LAM function based on the PERFECT Scheme (overall score: ρs = 0.206, p = 0.043; repeated maximum voluntary contractions (MVCs): ρs = 0.203, p = 0.046; power/motor control: ρs = 0.214, p = 0.035). Lower symptom severity (ICIQ-FLUTS-UI) was associated with observed perineal lift during coughing (U = 34.000; p = 0.042). All measures of SUI severity and LAM function were significantly improved after PFMT intervention. Greater improvements in bladder neck elevation during MVC (ρs = −0.261, p = 0.027) and greater reductions in levator plate length during MVC (ρs = 0.292, p = 0.016) were weakly associated with greater reductions in leakage (30MPT), the latter also being associated with more improvement symptoms (ICIQ-FLUTS-UI; ρs = 0.238, p = 0.041). Greater improvement in the ability to repeat MVCs (ρs = 0.303, p = 0.009) was weakly associated with smaller improvements in symptoms (ICIQ-FLUTS-UI). Improvements in bladder neck support and elevation show weak associations with improvement in SUI signs and symptoms. LAM function as measured by the PERFECT Scheme is not associated with SUI severity in women, and improvements in LAM function when measured by the PERFECT Scheme are not associated with improvements in SUI signs and symptoms.

Purpose Atrial fibrillation (AF) ablation is a common procedure to reduce cardiovascular morbidity but is limited by recurrence. The objective of this study was to determine if post-ablation acute surface P wave morphology and other electrocardiographic parameters correlate with AF recurrence. Methods The Avoiding Bladder Catheters During AF ablation (ABCD-AF) trial was a randomized, prospective trial in 160 subjects undergoing AF ablation. The present study examined correlation between AF recurrence in follow-up and acute post-ablation electrocardiographic P wave parameters. Results Median follow-up was 255 (188, 306) days. The ABCD-AF cohort had a mean age of 62.7 ± 12.8 with 32.1% being females. Rate of recurrent AF was 35.8%, with a median time to AF of 135 (109, 182) days. There was no baseline demographic associated with AF recurrence. There was more AF recurrence in those with longer follow-up (p = 0.001). Lead 2 PR interval, lead 2 P wave duration/PR (Pdur/PR), lead V1 PR interval, and lead V1 Pdur/PR were all significantly associated with recurrent AF (p = 0.03, 0.02, 0.01, 0.01). Longer PR and shorter Pdur/PR predicted AF recurrence. In a multivariable model, lead V1 Pdur/PR provided the best predictor of AF recurrence, with an odds ratio of 0.018 (p = 0.016) per standard deviation change. Conclusions Shorter P wave duration combined with longer AV node delay, as measured by proportion of the PR that the P wave occupies, was the best predictor of AF recurrence post-ablation.

To compare radioembolization treatment zone volumes from mapping cone beam CT (CBCT) versus planning CT/MRI and to model their impact on dosimetry. Y90 cases were retrospectively identified in which intra-procedural CBCT angiograms were performed. Segmental and lobar treatment zone volumes were calculated with semi-automated contouring using Couinaud venous anatomy (planning CT/MRI) or tumor angiosome enhancement (CBCT). Differences were compared with a Wilcoxon signed-rank test. Treatment zone-specific differences in segmental volumes by volumetric method were also calculated and used to model differences in delivered dose using medical internal radiation dosimetry (MIRD) at 200 and 120 Gy targets. Anatomic, pathologic, and technical factors likely affecting segmental volumes by volumetric method were evaluated. Forty segmental and 48 lobar CBCT angiograms and corresponding planning CT/MRI scans were included. Median Couinaud- and CBCT-derived segmental volumes were 281 and 243 mL, respectively (p = 0.005). Differences between Couinaud and CBCT lobar volumes (right, left) were not significant (p = 0.24, p = 0.07). Couinaud overestimated segmental volumes in 28 cases by a median of 98 mL (83%) and underestimated in 12 cases by median 69 mL (20%). At a 200 Gy dose target, Couinaud estimates produced median delivered doses of 367 and 160 Gy in these 28 and 12 cases. At a 120 Gy target, Couinaud produced doses of 220 and 96 Gy. Proximal vs. distal microcatheter positioning, variant arterial anatomy, and tumor location on or near segmental watersheds were leading factors linked to volumetric differences. Use of CBCT-based volumetry may allow more accurate, personalized dosimetry for segmental Y90 radioembolization.

Folate may be involved in the detoxification of heavy metals. This has been demonstrated in animal studies, in in vivo and in vitro studies, and clinical evaluations. However, knowledge regarding the associations between serum folate and blood concentrations of cadmium and lead is limited. We aimed to investigate the relationship between serum folate levels and blood concentrations of cadmium and lead in US adults. Data on 15,501 adults were obtained from the 1999–2006 National Health and Nutrition Examination Survey (NHANES) and used for the analysis. Information on serum folate concentrations and blood levels of lead and cadmium was derived from laboratory measurements in the NHANES. Multivariable linear regression was used to examine the relationship between serum folate levels and blood concentrations of cadmium and lead in US adults, controlling for confounders. The serum folate concentration was negatively correlated with blood levels of cadmium and lead (P-trends 60 mL/min/1.73 m2), the association between serum folate concentrations and blood levels of cadmium and lead was found to be more stable in adults with eGFR > 60 mL/min/1.73 m2, both in males and females. These findings warrant future studies to explore the mechanisms responsible for the beneficial role of folate in regulating cadmium and lead concentrations in the blood.

Surgeons should aim for continuous quality improvement. The aim of this study was to evaluate the impact of incremental changes to Robot Assisted Radical Prostatectomy (RARP) technique on intra-operative and early post-operative outcomes. All cases of RARP performed by a single surgeon in a tertiary institution over a 2-year period were included in this evaluation. Routine clinical data were collected. Cases were retrospectively allocated to four groups depending on key technical steps (1 = standard anterior approach; 2 = anterior approach with preservation of endopelvic fascia, puboprostatic fascia and urachus; 3 = posterior approach for nerve spare, with preservation of endopelvic fascia, puboprostatic fascia and urachus; 4 = Retzius-sparing posterior approach). 187 patients were allocated to groups: 1 = 22, 2 = 53, 3 = 90, 4 = 22. There were no significant differences in pre-operative characteristics, except age: 1 = 62.5, 2 = 62, 3 = 62.5, 4 = 58.5 (p = 0.02). Intra-operative differences were found in console time: 1 = 195, 2 = 167, 3 = 195 4 = 136.5 min (p

This study aims to calculate the dose delivered to the upstream surface of a biocompatible flexible absorber covering lead for electron beam treatment of skin and subcutaneous tumour lesions for head and neck. Silicone (Ecoflex™ 00–30, Smooth-On, Easton, PA, USA) was used to cover the lead to absorb backscattered electrons from lead. A 3D printer (Zortrax M300, Zortrax, Olsztyn, Poland) was used to fabricate the lead shield. Analytic calculation, simplified Monte Carlo (MC) simulation, and detailed MC simulation which includes a modeling of metal–oxide–semiconductor field-effect transistor (MOSFET) detector were performed to determine the electron backscatter factor (EBF) for 6 MeV and 9 MeV electron beams of a Varian iX Silhouette. MCNP6.2 was used to calculate the EBF and corresponding measurements were carried out by using MOSFET detectors. The EBF was experimentally measured by the ratio of dose at the upstream surface of the silicone to the same point without the presence of the lead shield. The results derived by all four methods agreed within 2.8% for 6 MeV and 3.4% for 9 MeV beams. In detailed MC simulations, for 6 MeV, dose to the surface of 7-mm-thick absorber was 103.7 $$\pm$$ 1.9% compared to dose maximum (Dmax) without lead. For 9 MeV, the dose to the surface of the 10-mm-thick absorber was 104.1 $$\pm$$ 2.1% compared to Dmax without lead. The simplified MC simulation was recommended for practical treatment planning due to its acceptable calculation accuracy and efficiency. The simplified MC simulation was completed within 20 min using parallel processing with 80 CPUs, while the detailed MC simulation required 40 h to be done. In this study, we outline the procedures to use the lead shield covered by silicone in clinical practice from fabrication to dose calculation.

This study measured the self-reported level of fatigue, pain, and neuromuscular function of the knee extensor muscles over a three-day period that included two consecutive days of full-body resistance exercises. 10 resistance-trained men performed two consecutive days of full-body resistance exercise. Muscle activation (electromyography and voluntary activation), contractility, and presynaptic inhibition of Ia afferents (homosynaptic and GABA mediated presynaptic inhibition) for the quadriceps were examined from femoral and posterior tibial nerve stimulation. Fatigue and pain were elevated after Day 1, and were not reduced to pre-exercise levels at the start of Day 2 (p

To investigate the hemodynamic responses, especially HPE following different resistance exercises RE protocols in young adult subjects. Eighty-nine men (28.0 ± 3.4 years, 82.0 ± 5.4 kg, and 26.4 ± 2.1 kg/m2) participated in the present study and were randomly allocated into six groups as follows: (a) control group (n = 12), (b) circuit group (n = 19), (c) 50% Group (n = 12), (d) 70% Group (n = 14), (e) 80% Group (n = 13), and (f) 90% Group (n = 19). Blood pressure and heart rate were measured in 7 different times: rest, 1, 15, 30, 45, 60, and 120 min after the RE section. Results were considered significant at P

Congenital heart disease (CHD) is the most prevalent congenital defect that causes several problems for patients and their families and medical specialists. It is important to investigate CHD risk factors due to their significantly destructive load on society. This study aims to determine the association between maternal lead exposure and conceiving a child with CHD. This case–control study was performed on a total of 246 mothers in the pediatric clinic of Vali-e-Asr Hospital in Birjand, Iran. One hundred forty-six mothers with CHD children were defined as the case group, and 100 age-matched mothers with healthy children were considered the control group. All the mothers were between 20 and 40 years old, and their children were under the age of 6 months. Demographic data was collected from mothers using a well-designed questionnaire. In addition, all mothers were referred to the laboratory for measuring blood lead concentrations. The mean blood lead concentration (BLC) of mothers in the group of children with heart problems was 4.11 ± 10.02 with a median of 2.50 μg/dL and in the control group was 2.66 ± 2.06 with a median of 2.30 μg/dL. The Mann–Whitney test results showed that mothers’ lead concentration in the group of children with heart problems was significantly higher than the control group (z = 2.13, p = 0.03). The chi-square test results showed that lead concentrations in the two groups were significantly different from each other (χ2 = 9.11, p = 0.01). The results of our study showed that mothers of children with CHD had higher blood concentrations than mothers of healthy children.

Purpose This study aimed to compare progressive muscle relaxation (PMR) + standard physiotherapy (PT) to standard PT during inpatient rehabilitation of total knee arthroplasty (TKA) patients in terms of post-operative outcomes. The hypothesis was that PMR + standard PT would lead to better pain, function, and neuromuscular outcomes than standard PT. Methods A total of 106 patients were randomly allocated into PMR or standard rehabilitation (SR) groups. Both groups received standard PT during their hospital stay. PMR group additionally performed PMR exercise on post-operative days 1, 2, and 3. Patients were evaluated regarding pain intensity, functional outcomes, muscle strength, active range of motion, knee edema, anxiety, depression, and kinesiophobia. Results There were no differences between groups at baseline (n.s.). During the inpatient period and at discharge, the PMR group had better results in terms of pain relief (p < 0.05), quadriceps strength (p = 0.001), kinesiophobia level (p = 0.011) compared to the SR group. No difference was detected between groups regarding other evaluation parameters during the inpatient period, at discharge, and third post-operative month (n.s.). The within-group analysis showed statistically significant differences over time in both groups in each variable (p < 0.05). Conclusion Our findings support that PMR therapy offers beneficial results in subjective and objective measures of TKA patients during the inpatient period. Therefore, PMR therapy could be implemented into the rehabilitation program of TKA patients to enhance their early recovery from various symptoms following TKA.

Obstructive sleep apnea syndrome (OSAS) is considered to be an important predisposing factor for cardiovascular diseases. The main objective of this study was to investigate the impact of CPAP treatment on cardiac structure and function and to assess patient compliance over a long-term course of CPAP treatment. A total of 50 patients diagnosed with moderate-to-severe OSAS based on overnight study, without relevant concomitant diseases were enrolled. Patient compliance, along with echocardiographic and CPAP parameters, was assessed. The average time to follow-up was 38 ± 4.2 months. An increase in tricuspid annular plane systolic excursion (TAPSE) (22.1 ± 4.3–25.5 ± 4.6 mm, p = 0.005) and peak early systolic tricuspid annular velocity (S’) (14 ± 3.2–17.2 ± 5.2 cm/s, p = 0.005) after CPAP treatment was noted. In patients without CPAP, no significant change in right ventricular (RV) contractility was found. There were no significant differences regarding right atrial (RA) and RV diameters, as well as tricuspid regurgitant peak gradient (TRPG) in both groups; however, a predisposition to increased RA size along with RV and tricuspid annulus diameters was revealed. The mean duration of nightly CPAP use was 3 ± 2.3 h/night in all-day analysis and 4.7 ± 2.1 h/night on days with device usage. The non-adherence rate was 57%. The use of effective CPAP therapy may lead to increased RV systolic function in patients with OSAS in long-term observation. However, long-term patient compliance is generally poor. Regardless of CPAP therapy, a gradual increase in heart size is observed.

Background: Fatigue, inflammation, and physical activity (PA) are all independently associated with gait speed, but their directionality is not fully elucidated. Aims: Evaluate the bidirectional associations amongst fatigue, inflammation, and PA on gait speed. Methods: This cross sectional study included probands (n = 1280, aged 49–105) and offspring (n = 2772, aged 24–88) in the Long Life Family Study. We assessed gait speed, fatigue with the question “I could not get going”, inflammation using fasting interleukin-6 (IL-6) and high sensitivity C-reactive protein (CRP), and self-reported PA as walking frequency in the past two weeks. The two generations were examined separately using linear mixed modeling. Results: Lower fatigue, lower IL-6, and greater PA were all associated with faster gait speed in both generations (all p < 0.05); lower CRP was only associated with faster gait speed in the offspring. PA explained the association of fatigue and gait speed via a 16.1% (95% CI 9.7%, 26.7%) attenuation of the direct associations for the probands and 9.9% (95% CI 6.3%, 18.8%) in the offspring. In addition, IL-6 explained more of the association of fatigue and gait speed than the association between PA and gait speed, via a 14.9% (95% CI 9.2%, 23.4%) attenuation of the direct association in the offspring only. Discussion: Results revealed a potential directionality from fatigue to IL-6 to PA that may lead to faster gait speed. Future work should examine these relationships longitudinally to establish temporality and causality. Conclusions: Our findings support a signal that lowering fatigue and inflammation and increasing physical activity may delay functional decline.

Intra-saccular devices (ID), developed for the treatment of bifurcation aneurysms, offer new alternatives for treating complex terminal and bifurcation aneurysms. In this work, a complete workflow going from medical images to post-treatment CFD analysis is described and used in the assessment of a concrete clinical problem. Two different intra-saccular device sizes were virtually implanted in 3D models of the patient vasculature using the ID-Fit method. After deployment, the local porosity at the closed end of the device in contact with the blood flow was computed. This porosity was then used to produce a CFD porous medium model of the device. Velocities and wall shear stress were assessed for each model. Six patients treated with intra-saccular devices were included in this work. For each case, 2 different device sizes were virtually implanted and 3 CFD simulations were performed: after deployment simulation with each size and before deployment simulation (untreated). A visible reduction in velocities was observed after device implantation. Velocity and WSS reduction was statistically significant (K–S statistics, $$p

Temporary cardiac pacemakers used in periods of need during surgical recovery involve percutaneous leads and externalized hardware that carry risks of infection, constrain patient mobility and may damage the heart during lead removal. Here we report a leadless, battery-free, fully implantable cardiac pacemaker for postoperative control of cardiac rate and rhythm that undergoes complete dissolution and clearance by natural biological processes after a defined operating timeframe. We show that these devices provide effective pacing of hearts of various sizes in mouse, rat, rabbit, canine and human cardiac models, with tailored geometries and operation timescales, powered by wireless energy transfer. This approach overcomes key disadvantages of traditional temporary pacing devices and may serve as the basis for the next generation of postoperative temporary pacing technology. A biodegradable pacemaker without external leads improves the safety of temporary cardiac pacing.

The double reduced beam section (DRBS) connection is a newly developed steel moment connection. In this paper, the chaotic particle swarm optimization technique was utilized to optimize this connection for the best seismic performance. The resulting optimum DRBS connection shapes showed up to 39% better energy dissipation and up to respectively 50% and 55% lower rupture index (RI) and equivalent plastic strain (PEEQ) at the beam-column interface, compared to the conventional RBS connection. Also, the optimum design parameters determined in this paper led to up to a 28% increase in the objective function (energy dissipation) and up to respectively 36% and 38% decreases in the RI and PEEQ with respect to the original DRBS connection, indicating noticeable seismic performance enhancements. The results indicated that changing the size of the beam and column sections does not lead to any significant change in the optimal shape of the beam flange cut or the seismic performance of the connection.

Lumbar epidural infiltration (EI) is a feasible procedure performed in pain therapy. Even though epidural analgesia is widely applied, it remains a blind technique, based on the operator's hand sensations, and it is associated with significant failure rate and several potential complications. Compuflo® (Compuflo, Milestone Scientific, Livingston, NJ) is a computerized injection pump which precisely detects the real time pressure at the tip of a Tuohy needle when placed in human tissues, thanks to a continuous fluid path. In our institution, we usually perform EI for chronic back pain guided by the Compuflo device, especially for expected difficult procedures. However, we report 6 false negative cases on a total number of 60 procedures in which the Compuflo system didn't meet the criteria of epidural space entry, even though the epidural space was actually reached. A mild pressure decrease (less than 50%) which lasted for more than 5 s was reported on the monitor, and the acoustic signal changed in a little bit lower sound, without a clear indication on stopping or not the needle advancement. This unspecific drop in monitored pressure gives false negatives using the Compuflo® system and may lead to excessive advancing of the needle. In conclusion, we consider the epidural pressure monitoring device Compuflo as a tool which may be able to ease the correct positioning of an epidural needle. The percentage of 10% false negative identifications of the epidural space in our case series however suggests more investigations on adequate or specific settings for this epidural system. In the meantime, in chronic pain patients, this anesthetic technique should only be used by experienced hands.

Lead exposure as a toxic material especially in children can be recognized as a harmful factor for cognitive function system. This meta-analysis was conducted to estimate the lead exposure effect on cognitive function among 6979 children less than 12 years. The 16 studies were divided into two clusters according to "duration of exposure" and "dose" using k-means partitioning clustering algorithm. Then, subgroup analysis has been performed based on the clustered studies. According to the results of the k-means clustering, dose and duration of exposure were significant factors between all considered variables. A stronger negative significant pooled correlation was observed in higher dose and duration cluster in comparison with another cluster including lower dose and duration (r = - 0.29, P-value < 0.001 vs. r = - 0.08, P-value < 0.001). Overall, a negative significant correlation was observed between lead exposure and cognitive function test score (r = - 0.22, P-value < 0.001). This study confirms the negative effect of lead on cognitive function in children, but needed further investigations to achieve the safe dose and duration of the lead exposure.

For fabricating (K, Na)NbO3-based ceramic, the improved piezoelectric properties can be obtained through phase boundary design. Herein, the (1 − x)K0.48Na0.52Nb0.96Sb0.04O3–x(Bi0.5Li0.45Ag0.05)(Zr0.98Hf0.02)O3 lead-free ceramics with rhombohedral-tetragonal (R-T) phase boundary was designed and developed by the conventional pressureless sintering. The relationship between phase structure, surface morphology and electrical properties was systematically investigated. According to phase diagram from XRD and dielectric-temperature measurements, the ceramics exhibit the R-T phase coexistence in the range of 0.035 ≤ x ≤ 0.05. As a result, the optimal comprehensive properties (d33 ~ 343 pC/N, d33* ~ 410 pm/V, TC ~ 270 °C) were achieved in the ceramic with x = 0.035, due to the coexistence of R-T phase caused free energy flatten and energy barrier reduce. These results indicate that the construction of R-T phase coexistence is an effective strategy to improve the electrical properties of KNN-based ceramics.

Many instruments and sensors have been invented to measure pressure, with different advantages and disadvantages. Many factors like pressure range, accuracy, sensitivity, reproducibility, dynamic response, and cost are involved in developing a pressure measuring device. This research paper describes the study of variation in the dielectric constant of lead iron tungstate relaxor specimens with pressure and temperature. In this study, the investigator optimized the specimen's preparation method by changing calcination temperature, adding excess lead oxide, using conventional mixed oxides and columbite routes to improve the specimen's pressure-sensing properties. This study adds another pressure-sensing application of relaxor materials among many other applications.

Stomatognathic system is an interaction of the muscles of mastication, dentition, neural component, and temporomandibular joint. Any dysfunction in this system may lead to temporomandibular disorders (TMDs). Various non-surgical modalities have been employed for treating TMDs. The aim of the study was to objectively evaluate the effects of low-level laser therapy (LLLT) in treatment of patients with TMDs. Sixty individuals diagnosed with TMDs were divided randomly into two groups (Group I—placebo and Group II -LLLT). A series of 20 sessions of LLLT applied both in closed mouth and maximum mouth opening position were given over a period of 08 weeks. Assessment was done in terms of improvement in mouth opening, pain, clicking, and deviation of mandible. The data collected were analyzed statistically. The results showed improvement in the pain reduction, improvement in the maximum mouth opening, reduction in deviation, and clicking in both groups but better treatment outcome in the low-level laser group. Though conservative measures improved the symptoms in TMD but LLLT has shown better results in comparison with the placebo group. Being non-surgical can be employed in combination with other modes for effectively treating such disorders. Keywords: Pain, Dysfunction, Temporomandibular joint disorders (TMDs), Low-level laser therapy (LLLT).

Lead (Pb) exposure has been reported to have nephrotoxicity. However, such an effect has not been well investigated in type 2 diabetes (T2D) patients, especially when taking into account the nutrition status of the patients. Therefore, we explore the association between blood lead levels (BLLs), dietary intake of nutrients, and impaired renal function among patients with T2D. We measured BLLs and biochemical parameters of renal injury in 780 patients. Dietary nutrients intake was assessed by a food frequency questionnaire in 420 of 780 participants. We found high BLLs were significantly associated with certain parameters of renal injury, and dietary intake of specific nutrients (mainly micronutrients) was associated with reduced BLLs at high percentile distribution of concentration. BLLs were also found to have moderation effects on the association between specific dietary nutrients and specific renal function parameters.

Railway superstructure components are subject to impact forces caused by irregularities in the rail and wheel or variations in the support stiffness. These imperfections lead to the premature and accelerated deterioration of the track and increase maintenance costs. Generally, to mitigate these dynamic loads, elastomeric rail pads are interposed between rails and sleepers. For each track section, the pad choice is made according to its stiffness, impact attenuation and cost. In this experimental study, eight types of rail pads were characterized using two procedures from EN 13146–3. The results revealed that the rail pad material and geometry affect the impact attenuation ability of the pad and the testing procedure affect the results. It was found that the preload applied is one of the parameters that most affects the impact attenuation value. Appling a preload of 50 kN during the impact attenuation test, which is suggested by the standard, affected this parameter by ranging from between ~2 and ~ 20, depending on the rail pad. Based on these results it is considered that EN 13146–3 should be updated.

Lead is one of the most hazardous environmental pollutants in industrialized countries; lead exposure is a risk factor for osteoarthritis (OA) in older women. Here, the performance of several machine-learning (ML) algorithms in terms of predicting the prevalence of OA associated with lead exposure was compared. A total of 2224 women aged 50 years and older who participated in the Korea National Health and Nutrition Examination Surveys from 2005 to 2017 were divided into a training dataset (70%) for generation of ML models, and a test dataset (30%). We built and tested five ML algorithms, including logistic regression (LR), a k-nearest neighbor model, a decision tree, a random forest, and a support vector machine. All afforded acceptable predictive accuracy; the LR model was the most accurate and yielded the greatest area under the receiver operating characteristic curve. We found that various ML models can be used to predict the risk of OA associated with lead exposure effectively, using data from population-based survey.

Despite the breast volume being an essential metric component of any aesthetic or reconstructive breast surgery, up to date, there has been no accepted measurement technique that is globally accepted by breast surgeons. Appropriate measurement might lead to decrease of the reoperation rates. We introduced a novel technique that provides simply accurate volume measurement. Thirty patients with breast cancer who were scheduled for modified radical mastectomy were included in the study. Preoperative breast volume measurement using the novel device and breast MRI studies was done for all patients; meanwhile, the gold standard technique (d irect water displacement measurement of mastectomy specimen) was used to measure the volume of breast specimen following mastectomy. There were strongly positive correlations between the device and gold standard technique (r = 0.957) in 23 patients, and (r = 0.997) in 30 patients when MRI was compared to gold standard measurements. In group 1 (breast volume < 500), there is a strong correlation between the device and gold standard (r = 0.914) and for the MRI and gold standard (r = 0.965). In group 2 (500–1000), there was also a strong correlation between the device and gold standard (r = 0.986) and for the MRI and gold standard (r = 0.989) as well. The novel device had been proven to be cost-efficient, simple, reproducible technique with minimal learning curve. It provides reliably comparable results to gold standard techniques and MRI measurement in breast volumes up to 1000 cc. It utilized simple material and basic principles that can be easily used in most settings. Level of evidence: Level IV, diagnostic study.

Prepulse inhibition (PPI) of the acoustic startle response can index automatic and attention-modulated aspects of sensorimotor gating. Automatic sensorimotor gating is typically assessed by a no-task PPI protocol in which participants are presented with discrete white noise prepulse and startle stimuli over continuous background broadband noise at brief short-lead intervals (e.g., 60–120 ms). In contrast, attention-modulated sensorimotor gating is typically assessed through a task-based PPI protocol using continuous format pure tone prepulses and white noise startle stimuli presented over an ambient background at a lead interval of 120 ms. The present study sought to test the extent that the assessment of attention-modulated PPI is dependent on prepulse type and lead interval across two experiments. Experiment 1 assessed attention effects on PPI produced by discrete prepulses at lead intervals of 60 and 120 ms. Experiment 2 examined attention effects on PPI with matched stimulus conditions apart from continuous prepulses. Results indicated that the use of discrete prepulses failed to elicit attentional-modulation of PPI and that assessment therein was dependent on the use of continuous prepulses at a lead interval of 120 ms. These results highlight additional methods to concurrently assess automatic and attention-modulated PPI in a single testing session using a task-based tone counting task.

We sought to clarify the electrocardiographic and electrophysiological characteristics of ventricular arrhythmias (VAs), including idiopathic ventricular tachycardia (VT) and premature ventricular contractions (PVCs), with acute successful radiofrequency catheter ablation (RFCA) at the left ventricular basal inferoseptum recess near the mitral annulus (LV-BIS-MA). Twenty-five patients with acute successful RFCA at the LV-BIS-MA were included in this study. The S-wave amplitudes on lead III during VAs were 1.54 ± 0.38 mV, significantly larger than those on lead II (0.55 ± 0.19 mV) and aVF (1.04 ± 0.31 mV) (P 1 transition before lead V2 and S-waves in lead V6 was recorded in 100% and 48.0% of patients, respectively. The earliest bipolar activation preceded the QRS onset by 32.3 ± 11.5 ms. Pace mapping demonstrated perfect QRS morphology matching in only 56.0% of patients. The RFCA start-to-effect time was 10.2 ± 5.8 seconds (s) in 21 patients (84.0%). In the remaining 4 patients (16.0%), the mean duration of successful RFCA was not well determined due to the infrequent presence of clinical VAs during ablation. The trans-septal approach was utilized in all 25 cases. Intra-cardiac echocardiography (ICE) showed that the ablation catheter tip was underneath the anterior leaflet of the mitral valve via the reversed C-curve technique. Early (within 3 days) and late (1 year) recurrence rates were 4.0% (one patient) and 12.0% (three patients), respectively. No complications during RFCA or at the 1-year follow-up. LV-BIS-MA VAs are a subgroup of idiopathic VAs with distinctive ECG and EP features. RFCA via a trans-septal approach using a reversed C-curve technique is effective for better identification and targeting of the areas of VAs origin, and ICE showed that the ablation catheter tip was underneath the anterior leaflet of the mitral valve.

Aim The length of the femoral stem in total hip arthroplasty (THA) is a practical consideration to prevent gait impairment. The aim of this study was to determine if reducing the femoral stem length in THA would lead to impaired gait biomechanics. Methods Patients uniformly with the same brand implant of differing lengths (100 mm vs 140–166 mm) were taken retrospectively from a prospective trial introducing a new short stem. Twelve patients without any other disorder to alter gait besides contralateral differing length stem THA were tested at differing gradients and speed on a validated instrumented treadmill measuring ground reaction forces. An anthropometrically similar group of healthy controls were analysed to compare. Results With the same posterior surgical approach, the offset and length of both hips were reconstructed within 5 mm of each other with an identical mean head size of 36 mm. The short stem was the last procedure for all the hips with gait analysis occurring at a mean of 31 and 79 months postoperatively for the short and long stem THA, respectively. Gait analysis between limbs of both stem lengths demonstrated no statistical difference during any walking condition. In the 90 gait assessments with three loading variables, the short stem was the favoured side 51% of the time compared 49% for the long stem. Conclusion By testing a range of practical walking activities, no lower limb loading differences can be observed by reducing the femoral stem length. A shorter stem demonstrates equivalence in preference during gait when compared to a reputable conventional stem in total hip arthroplasty.

To evaluate the effect of different inflation volume on the measurement accuracy of the modified cuff pressure measurement method in different shapes of cuffs, so as to provide reference for the correct monitoring of cuff pressure in clinic. In vitro study: The traditional cuff pressure measurement method (the cuff pressure gauge before measurement shows 0 cm H2O) and the modified cuff pressure measurement method (the cuff pressure before measurement shows 25 cm H2O, 28 cm H2O, 30 cm H2O or 32 cm H2O) were used to measure cylindrical and tapered cuffs, and the effect of different inflation volume on cuff pressure was analyzed statistically. Clinical study: patients with the artificial airway established by orotracheal intubation or tracheotomy in Neuro-ICU were prospectively selected as subjects, and the measurement procedure was the same as in vitro study. In vitro study showed that the pressure loss values of cylindrical cuff and tapered cuff using the traditional cuff pressure measurement method were (3.75 ± 0.31) cm H2O and (4.92 ± 0.44) cm H2O, respectively, and clinical study showed that the pressure loss values were (5.07 ± 0.83) cm H2O and (5.17 ± 0.93) cm H2O, respectively. The actual measured values measured by the traditional cuff pressure measurement method of the two cuff shapes were compared with the corrected target value of 28 cm H2O, and the differences were statistically significant (P < 0.000). Both in vitro and clinical study had shown that all differences between the actual measured value and the corrected target value using the modified cuff pressure measurement method (measured with 25 cm H2O, 30 cm H2O, 32 cm H2O) were statistically significant (P < 0.000), and the range of overall differences was (0–1.23 ± 0.25) cm H2O. In vitro study had shown that the pressure variation coefficient (CV) of the tapered cuff was greater than that of the cylindrical cuff, and the difference was statistically significant (3.08 ± 0.25 VS 2.41 ± 0.21, P < 0.000). The traditional cuff pressure measurement method can directly lead to the cuff pressure drop, which is easy to cause the leakage of secretions on the cuffs and the misjudgment of the cuff pressure by medical personnel. However, the modified cuff pressure measurement method can effectively reduce cuff pressure loss, and taking the actual cuff pressure value as the inflation volume is the highest measurement accuracy.The tapered cuff is more susceptible to air volume, so it is necessary to pay attention to its measurement and correction in clinical practice.

This single-blind, randomised controlled trial was aimed at determining whether peri-operative physiotherapist-supervised pelvic floor muscle (PFM) training was superior to standard care (handout) in terms of improvements in stress urinary incontinence (SUI) symptoms, cure rate, and/or post-operative filling or voiding symptoms among women undergoing surgical mid-urethral sling (MUS) insertion for SUI. Women with SUI were recruited from surgical wait lists at four participating urogynecology clinics. Participants were assessed at baseline (V1) then randomised (1:1 allocation) to receive supervised PFM training or a handout. Immediately following the 12-week intervention period (V2) and at 12 weeks following surgery (V3) the groups were compared based on the Female Lower Urinary Tract Symptoms (FLUTS) questionnaire total score and urinary incontinence, filling, and voiding subscale scores as well as on a standardised 30-min pad test administered by a blinded assessor. Intention-to-treat analyses were performed. A total of 52 participants were randomised to physiotherapy and 51 to the control group between December 2012 and August 2016. The groups were not different on any outcomes at V1 and all were improved at V3 compared with V1 (p 0.05). Based on a FLUTS UI subscale score 0.05). No adverse events were reported. Physiotherapist-supervised PFM training improves SUI cure rates associated with surgical MUS insertion when considering symptoms of SUI, but does not improve post-operative continence function as measured by a pad test, nor does it lead to fewer post-operative voiding or filling symptoms.

During the braking process, frictional heat generated between a disc and a pad can lead to high temperatures. The location of friction blocks on the brake pad can lead directly to differences in friction contact time and friction speed at each point on the brake disc surface, this can lead to non-uniform temperature distribution on the brake disc surface. In this paper, the optimum design for friction blocks on a brake pad is investigated using the design of experiments (DOE) of Taguchi approach and response surface method (RSM) with an aim to minimize the deviation in the rate of friction heating in each area along the radial direction of brake disc. 18 design variables on 2 levels are adjusted. A table of orthogonal arrays, L32 (218), is used. Finite element analysis (FEA) is performed to analyze the mean squared error (MSE) values in the temperature deviations from frictional heat, the disc’s thermo-mechanical characteristics are taken into account. Analysis of variance (ANOVA) is carried out using the data gathered from the DOE stage, we find 7 significant factors among the design variables. A meta-model using RSM is proposed for reduction of temperature deviations over the brake disc. An optimized brake pad is analyzed in terms of the temperature and thermal stress imparted on the brake disc, this optimized pad is then compared with the original pad. The maximum temperatures of the optimized pad and original pad were 399.8 °C and 480.6 °C, respectively. The thermal stress of the optimized pad and original pad were 640.4 MPa and 721.4 MPa, respectively. In the optimized model, the size of the hot band on the disc is larger than that from the original model, so the thermal stress distribution on the disc is smaller. Finally, the optimized pad was found to give significant performance benefits with a 16.8 % decrease in maximum temperature and 11.2 % decrease in thermal stress.

Endovascular thrombectomy (EVT) improves clinical outcomes in ischemic stroke with large vessel occlusion. Clinical benefits are inversely proportional to size of the pre-treatment ischemic core. This study compared estimated ischemic core volumes by two different CT perfusion (CTP) automated algorithms to the gold standard follow-up infarct volume using diffusion-weighted imaging (DWI) to assess for congruence, and thus eligibility for EVT. Retrospective, single-center cohort study of 102 patients presenting to a comprehensive stroke center between 2012 and 2018. Inclusion criteria were CT perfusion prior to EVT, successful EVT with mTIBI 2b-3 reperfusion, and DWI post-EVT. CTP data were retrospectively processed by two algorithms: “delay and dispersion insensitive deconvolution” (DISD, RAPID software) versus “delay and dispersion corrected single value decomposition” (ddSVD, Mistar software), using commercially available software. Core volumes were compared to follow up DWI using independent software (MRIcron). Agreement between each algorithm and DWI was estimated using Lin’s concordance coefficient and analyzed using reduced major axis regression. We included 102 patients. Both algorithms had excellent agreement with DWI (Lin’s concordance coefficients: DISD 0.8 (95% CI: 0.73; 0.87), ddSVD 0.92 (95% CI: 0.89; 0.95). Compared to ddSVD (reduced major axis slope = 0.95), DISD exhibited a larger extent of proportional bias (slope = 1.12). The ddSVD algorithm better correlates with DWI follow-up infarct volume than DISD processing. The DISD algorithm overestimated larger ischemic cores which may lead to patient exclusion from thrombectomy based on selection by core volume.

To evaluate the effects of subconjunctival bevacizumab injection on intraocular pressure (IOP), hypertensive phase, and failure and success rates of Ahmed Glaucoma Valve (AGV) implantation.A total of 63 eyes of 63 patients (30 cases in control and 33 cases in bevacizumab group) were included in this randomized masked prospective clinical trial. Pre- and postoperative BCVA, IOP, number of medications, complications and success rates were compared between AGV + bevacizumab and AGV alone group.Both groups showed statistically significant reductions in IOP in all their follow-up visits (P 0.05). The mean IOP was lower in the AGV + Bevacizumab group than AGV group in all follow-up visits. However, the difference was only significant at the 3rd month (17.3 ± 6.2 vs. 20.7 ± 4.6, p = 0.04). The number of medications was not differed significantly between the two groups at their last visit (p value = 0.84) Complete success rate was higher in AGV + Bevacizumab. However, the difference was not significant (p = 0.73). The qualified and overall success rate, failure rate and the need for second tube were not statistically different between the two groups. The hypertensive phase was not statistically significant between the 2 groups (33.3% in AGV + Bevacizumab group and 50% in AGV group, p = 0.06) CONCLUSION: Adjunctive use of Bevacizumab during AGV implantation is beneficial in controlling hypertensive phase and IOP control and may lead to higher success rates and lower failure rates after AGV implantation. However, whether it's clearly beneficial or its exact role remains to be investigated.

To propose and validate a variation of the classic techniques for the estimation of the transfer function (TF) of a real pacemaker (PM) lead. The TF of three commercially available PM leads was measured by combining data from experimental measurements and numerical simulations generated by three sources: a) the experimental local SAR at the tip of the PM lead (single measurement point) exposed to a 64 MHz birdcage body coil; b) the experimental current distribution along the PM lead, obtained by directly injecting a 64 MHz signal inside the lead; c) the electric field (E-field) simulated with a computational model of the 64 MHz birdcage body coil adopted in the experimental measurement performed in a). The effect of the lead trajectory on the estimation of the TF was also estimated. The proposed methodology was validated by comparing the SAR obtained from the PM lead TF with experimental measurements: a maximum difference of 2.2 dB was observed. It was also shown that the estimation of the TF cannot be considered independent with the lead trajectory: a variation of the SAR estimation up to 3.4 dB was observed. For the three PM lead tested, the error in the SAR estimation is within the uncertainty level of SAR measurements (± 2 dB). Additionally, the estimation of the TF using the reciprocity principle is influenced by the particular lead trajectory adopted, even if the consequent variability in the SAR estimation is still close to the uncertainty level of SAR measurements.